AJ_Status AJ_FindBusAndConnect(AJ_BusAttachment* bus, const char* serviceName, uint32_t timeout)
{
AJ_Status status;
AJ_Service service;
AJ_Time connectionTimer;
int32_t connectionTime;
uint8_t finished = FALSE;
bus->isAuthenticated = FALSE;
bus->isProbeRequired = TRUE;
AJ_InfoPrintf(("AJ_FindBusAndConnect(bus=0x%p, serviceName=\"%s\", timeout=%d, selection timeout=%d.)\n", bus, serviceName, timeout, selectionTimeout));
// Clear the bus struct
memset(bus, 0, sizeof(AJ_BusAttachment));
// Clear stale name->GUID mappings
AJ_GUID_ClearNameMap();
// Discover a daemon or service to connect to
if (!serviceName)
{
serviceName = daemonService;
}
while (finished == FALSE)
{
finished = TRUE;
connectionTime = (int32_t) timeout;
#if AJ_CONNECT_LOCALHOST
service.ipv4port = 9955;
#if HOST_IS_LITTLE_ENDIAN
service.ipv4 = 0x0100007F; // 127.0.0.1
#endif
#if HOST_IS_BIG_ENDIAN
service.ipv4 = 0x7f000001; // 127.0.0.1
#endif
service.addrTypes = AJ_ADDR_TCP4;
#else
AJ_InitTimer(&connectionTimer);
printf("AJ_FindBusAndConnect(): Connection timer started\n");
status = AJ_Discover(serviceName, &service, timeout, selectionTimeout);//aj_disco.c
if (status != AJ_OK)
{
printf("AJ_FindBusAndConnect(): AJ_Discover status=%s\n", AJ_StatusText(status));
goto ExitConnect;
}
#endif
// this calls into platform code that will decide whether to use UDP or TCP, based on what is available
printf("TCP connection started \n");
status = AJ_Net_Connect(bus, &service);
if (status != AJ_OK)
{
printf("AJ_FindBusAndConnect(): AJ_Net_Connect status=%s\n", AJ_StatusText(status));
goto ExitConnect;
}
status = AJ_Authenticate(bus);
if (status != AJ_OK)
{
printf("AJ_FindBusAndConnect(): AJ_Authenticate status=%s\n", AJ_StatusText(status));
#if ((!AJ_CONNECT_LOCALHOST) && (!defined(ARDUINO)) && (!defined(AJ_SERIAL_CONNECTION)))
printf("AJ_FindBusAndConnect(): Blacklisting routing node\n");
// какие-то махинации с данными
AddRoutingNodeToBlacklist(&service);
// try again
finished = FALSE;
connectionTime -= AJ_GetElapsedTime(&connectionTimer, FALSE);
// select a new node from the response list
while (connectionTime > 0)
{
// махинация с данными
status = AJ_SelectRoutingNodeFromResponseList(&service);
if (status == AJ_ERR_END_OF_DATA)
{
status = AJ_ERR_TIMEOUT;
//AJ_InfoPrintf(("Exhausted all the retries from the response list\n"));
finished = FALSE;
break;
}
printf("Retrying with a new selection from the routing node response list\n");
status = AJ_Net_Connect(bus, &service);
if (status != AJ_OK)
{
printf("AJ_FindBusAndConnect(): AJ_Net_Connect status=%s\n", AJ_StatusText(status));
goto ExitConnect;
}
status = AJ_Authenticate(bus);
if (status == AJ_OK)
{
finished = TRUE;
break;
}
else
{
connectionTime -= AJ_GetElapsedTime(&connectionTimer, FALSE);
}
}
#endif
}
if (status != AJ_OK)
{
printf("AJ_FindBusAndConnect(): AJ_Authenticate status=%s\n", AJ_StatusText(status));
goto ExitConnect;
}
status = SetSignalRules(bus);
if (status != AJ_OK)
{
printf("AJ_FindBusAndConnect(): SetSignalRules status=%s\n", AJ_StatusText(status));
goto ExitConnect;
}
AJ_InitRoutingNodeResponselist();
}
ExitConnect:
AJ_InitRoutingNodeResponselist();
if (status != AJ_OK)
{
printf("AJ_FindBusAndConnect(): status=%s\n", AJ_StatusText(status));
//закрываем соединение
AJ_Disconnect(bus);
}
return status;
}
AJ_Status AJ_FindBusAndConnect(AJ_BusAttachment* bus, const char* serviceName, uint32_t timeout)
{
AJ_Status status;
AJ_Service service;
#ifdef AJ_SERIAL_CONNECTION
AJ_Time start, now;
AJ_InitTimer(&start);
#endif
AJ_InfoPrintf(("AJ_Connect(bus=0x%p, serviceName=\"%s\", timeout=%d.)\n", bus, serviceName, timeout));
/*
* Clear the bus struct
*/
memset(bus, 0, sizeof(AJ_BusAttachment));
/*
* Clear stale name->GUID mappings
*/
AJ_GUID_ClearNameMap();
/*
* Discover a daemon or service to connect to
*/
if (!serviceName) {
serviceName = daemonService;
}
#if AJ_CONNECT_LOCALHOST
service.ipv4port = 9955;
#if HOST_IS_LITTLE_ENDIAN
service.ipv4 = 0x0100007F; // 127.0.0.1
#endif
#if HOST_IS_BIG_ENDIAN
service.ipv4 = 0x7f000001; // 127.0.0.1
#endif
service.addrTypes = AJ_ADDR_IPV4;
#elif defined ARDUINO
service.ipv4port = 9955;
service.ipv4 = 0x6501A8C0; // 192.168.1.101
service.addrTypes = AJ_ADDR_IPV4;
status = AJ_Discover(serviceName, &service, timeout);
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_Connect(): AJ_Discover status=%s\n", AJ_StatusText(status)));
goto ExitConnect;
}
#elif defined AJ_SERIAL_CONNECTION
// don't bother with discovery, we are connected to a daemon.
// however, take this opportunity to bring up the serial connection
status = AJ_Serial_Up();
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_Connect(): AJ_Serial_Up status=%s\n", AJ_StatusText(status)));
}
#else
status = AJ_Discover(serviceName, &service, timeout);
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_Connect(): AJ_Discover status=%s\n", AJ_StatusText(status)));
goto ExitConnect;
}
#endif
status = AJ_Net_Connect(&bus->sock, service.ipv4port, service.addrTypes & AJ_ADDR_IPV4, &service.ipv4);
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_Connect(): AJ_Net_Connect status=%s\n", AJ_StatusText(status)));
goto ExitConnect;
}
#ifdef AJ_SERIAL_CONNECTION
// run the state machine for long enough to (hopefully) do the SLAP handshake
do {
AJ_StateMachine();
AJ_InitTimer(&now);
} while (AJ_SerialLinkParams.linkState != AJ_LINK_ACTIVE && AJ_GetTimeDifference(&now, &start) < timeout);
if (AJ_SerialLinkParams.linkState != AJ_LINK_ACTIVE) {
AJ_InfoPrintf(("Failed to establish active SLAP connection in %u msec\n", timeout));
AJ_SerialShutdown();
return AJ_ERR_TIMEOUT;
}
#endif
status = AJ_Authenticate(bus);
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_Connect(): AJ_Authenticate status=%s\n", AJ_StatusText(status)));
goto ExitConnect;
}
// subscribe to the signal NameOwnerChanged and wait for the response
status = AJ_BusSetSignalRule(bus, "type='signal',member='NameOwnerChanged',interface='org.freedesktop.DBus'", AJ_BUS_SIGNAL_ALLOW);
ExitConnect:
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_Connect(): status=%s\n", AJ_StatusText(status)));
AJ_Disconnect(bus);
}
return status;
}
// TODO: deprecate this function; replace it with AJ_FindBusAndConnect
AJ_Status AJ_Connect(AJ_BusAttachment* bus, const char* serviceName, uint32_t timeout)
{
AJ_Status status;
AJ_Service service;
bus->isAuthenticated = FALSE;
AJ_InfoPrintf(("AJ_Connect(bus=0x%p, serviceName=\"%s\", timeout=%d, selectionTimeout=%d.)\n", bus, serviceName, timeout, selectionTimeout));
// Clear the bus struct
memset(bus, 0, sizeof(AJ_BusAttachment));
// Clear stale name->GUID mappings
AJ_GUID_ClearNameMap();
// Discover a daemon or service to connect to
if (!serviceName)
{
serviceName = daemonService;
}
#if AJ_CONNECT_LOCALHOST
service.ipv4port = 9955;
#if HOST_IS_LITTLE_ENDIAN
service.ipv4 = 0x0100007F; // 127.0.0.1
#endif
#if HOST_IS_BIG_ENDIAN
service.ipv4 = 0x7f000001; // 127.0.0.1
#endif
service.addrTypes = AJ_ADDR_TCP4;
#else
status = AJ_Discover(serviceName, &service, timeout, selectionTimeout);
if (status != AJ_OK)
{
AJ_InfoPrintf(("AJ_Connect(): AJ_Discover status=%s\n", AJ_StatusText(status)));
goto ExitConnect;
}
#endif
status = AJ_Net_Connect(bus, &service);
if (status != AJ_OK)
{
AJ_InfoPrintf(("AJ_Connect(): AJ_Net_Connect status=%s\n", AJ_StatusText(status)));
goto ExitConnect;
}
status = AJ_Authenticate(bus);
if (status != AJ_OK)
{
AJ_InfoPrintf(("AJ_Connect(): AJ_Authenticate status=%s\n", AJ_StatusText(status)));
goto ExitConnect;
}
status = SetSignalRules(bus);
if (status != AJ_OK)
{
AJ_InfoPrintf(("AJ_Connect(): SetSignalRules status=%s\n", AJ_StatusText(status)));
goto ExitConnect;
}
ExitConnect:
if (status != AJ_OK)
{
AJ_InfoPrintf(("AJ_Connect(): status=%s\n", AJ_StatusText(status)));
AJ_Disconnect(bus);
}
AJ_InitRoutingNodeResponselist();
return status;
}
AJ_Status AJ_FindBusAndConnect(AJ_BusAttachment* bus, const char* serviceName, uint32_t timeout)
{
AJ_Status status;
AJ_Service service;
AJ_Time connectionTimer;
int32_t connectionTime;
uint8_t finished = FALSE;
#ifdef AJ_SERIAL_CONNECTION
AJ_Time start, now;
AJ_InitTimer(&start);
#endif
AJ_InfoPrintf(("AJ_FindBusAndConnect(bus=0x%p, serviceName=\"%s\", timeout=%d, selection timeout=%d.)\n", bus, serviceName, timeout, selectionTimeout));
/*
* Clear the bus struct
*/
memset(bus, 0, sizeof(AJ_BusAttachment));
bus->isProbeRequired = TRUE;
/*
* Clear stale name->GUID mappings
*/
AJ_GUID_ClearNameMap();
/*
* Discover a daemon or service to connect to
*/
if (!serviceName) {
serviceName = daemonService;
}
while (finished == FALSE) {
finished = TRUE;
connectionTime = (int32_t) timeout;
#if AJ_CONNECT_LOCALHOST
service.ipv4port = 9955;
#if HOST_IS_LITTLE_ENDIAN
service.ipv4 = 0x0100007F; // 127.0.0.1
#endif
#if HOST_IS_BIG_ENDIAN
service.ipv4 = 0x7f000001; // 127.0.0.1
#endif
service.addrTypes = AJ_ADDR_TCP4;
#elif defined(ARDUINO)
service.ipv4port = 9955;
service.ipv4 = 0x6501A8C0; // 192.168.1.101
service.addrTypes = AJ_ADDR_TCP4;
AJ_InitTimer(&connectionTimer);
AJ_InfoPrintf(("AJ_FindBusAndConnect(): Connection timer started\n"));
status = AJ_Discover(serviceName, &service, timeout, selectionTimeout);
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_FindBusAndConnect(): AJ_Discover status=%s\n", AJ_StatusText(status)));
goto ExitConnect;
}
#elif defined(AJ_SERIAL_CONNECTION)
// don't bother with discovery, we are connected to a daemon.
// however, take this opportunity to bring up the serial connection
status = AJ_Serial_Up();
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_FindBusAndConnect(): AJ_Serial_Up status=%s\n", AJ_StatusText(status)));
}
#else
AJ_InitTimer(&connectionTimer);
AJ_InfoPrintf(("AJ_FindBusAndConnect(): Connection timer started\n"));
status = AJ_Discover(serviceName, &service, timeout, selectionTimeout);
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_FindBusAndConnect(): AJ_Discover status=%s\n", AJ_StatusText(status)));
goto ExitConnect;
}
#endif
// this calls into platform code that will decide whether to use UDP or TCP, based on what is available
status = AJ_Net_Connect(bus, &service);
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_FindBusAndConnect(): AJ_Net_Connect status=%s\n", AJ_StatusText(status)));
goto ExitConnect;
}
#ifdef AJ_SERIAL_CONNECTION
// run the state machine for long enough to (hopefully) do the SLAP handshake
do {
AJ_StateMachine();
AJ_InitTimer(&now);
} while (AJ_SerialLinkParams.linkState != AJ_LINK_ACTIVE && AJ_GetTimeDifference(&now, &start) < timeout);
if (AJ_SerialLinkParams.linkState != AJ_LINK_ACTIVE) {
AJ_InfoPrintf(("AJ_FindBusAndConnect(): Failed to establish active SLAP connection in %u msec\n", timeout));
AJ_SerialShutdown();
return AJ_ERR_TIMEOUT;
}
#endif
status = AJ_Authenticate(bus);
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_FindBusAndConnect(): AJ_Authenticate status=%s\n", AJ_StatusText(status)));
#if !AJ_CONNECT_LOCALHOST && !defined(ARDUINO) && !defined(AJ_SERIAL_CONNECTION)
if ((status == AJ_ERR_ACCESS_ROUTING_NODE) || (status == AJ_ERR_OLD_VERSION)) {
AJ_InfoPrintf(("AJ_FindBusAndConnect(): Blacklisting routing node\n"));
AddRoutingNodeToBlacklist(&service, AJ_ADDR_TCP4);
}
AJ_Disconnect(bus);
// try again
finished = FALSE;
connectionTime -= AJ_GetElapsedTime(&connectionTimer, FALSE);
// select a new node from the response list
while (connectionTime > 0) {
status = AJ_SelectRoutingNodeFromResponseList(&service);
if (status == AJ_ERR_END_OF_DATA) {
status = AJ_ERR_TIMEOUT;
AJ_InfoPrintf(("Exhausted all the retries from the response list\n"));
finished = FALSE;
break;
}
AJ_InfoPrintf(("Retrying with a new selection from the routing node response list\n"));
status = AJ_Net_Connect(bus, &service);
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_FindBusAndConnect(): AJ_Net_Connect status=%s\n", AJ_StatusText(status)));
goto ExitConnect;
}
status = AJ_Authenticate(bus);
if (status == AJ_OK) {
finished = TRUE;
break;
}
if ((status == AJ_ERR_ACCESS_ROUTING_NODE) || (status == AJ_ERR_OLD_VERSION)) {
AJ_InfoPrintf(("AJ_FindBusAndConnect(): Blacklisting another routing node\n"));
AddRoutingNodeToBlacklist(&service, AJ_ADDR_TCP4);
}
AJ_Disconnect(bus);
connectionTime -= AJ_GetElapsedTime(&connectionTimer, FALSE);
}
#endif
}
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_FindBusAndConnect(): AJ_Authenticate status=%s\n", AJ_StatusText(status)));
goto ExitConnect;
}
status = SetSignalRules(bus);
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_FindBusAndConnect(): SetSignalRules status=%s\n", AJ_StatusText(status)));
goto ExitConnect;
}
AJ_InitRoutingNodeResponselist();
}
ExitConnect:
AJ_InitRoutingNodeResponselist();
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_FindBusAndConnect(): status=%s\n", AJ_StatusText(status)));
AJ_Disconnect(bus);
}
return status;
}
// TODO: deprecate this function; replace it with AJ_FindBusAndConnect
AJ_Status AJ_Connect(AJ_BusAttachment* bus, const char* serviceName, uint32_t timeout)
{
AJ_Status status;
AJ_Service service;
bus->isAuthenticated = FALSE;
#ifdef AJ_SERIAL_CONNECTION
AJ_Time start, now;
AJ_InitTimer(&start);
#endif
AJ_InfoPrintf(("AJ_Connect(bus=0x%p, serviceName=\"%s\", timeout=%d, selectionTimeout=%d.)\n", bus, serviceName, timeout, selectionTimeout));
/*
* Clear the bus struct
*/
memset(bus, 0, sizeof(AJ_BusAttachment));
/*
* Clear stale name->GUID mappings
*/
AJ_GUID_ClearNameMap();
#if !(defined(ARDUINO) || defined(__linux) || defined(_WIN32) || defined(__MACH__))
/*
* Get an IP address. We don't want to break this older version
* of AJ_Connect, so acquire an IP if we don't already have one.
*
* This does not work on non-embedded platforms!
*/
{
uint32_t ip, mask, gw;
status = AJ_AcquireIPAddress(&ip, &mask, &gw, AJ_DHCP_TIMEOUT);
if (status != AJ_OK) {
AJ_ErrPrintf(("AJ_Net_Up(): AJ_AcquireIPAddress Failed\n"));
}
}
#endif
/*
* Discover a daemon or service to connect to
*/
if (!serviceName) {
serviceName = daemonService;
}
#if AJ_CONNECT_LOCALHOST
service.ipv4port = 9955;
#if HOST_IS_LITTLE_ENDIAN
service.ipv4 = 0x0100007F; // 127.0.0.1
#endif
#if HOST_IS_BIG_ENDIAN
service.ipv4 = 0x7f000001; // 127.0.0.1
#endif
service.addrTypes = AJ_ADDR_TCP4;
#elif defined(ARDUINO)
service.ipv4port = 9955;
service.ipv4 = 0x6501A8C0; // 192.168.1.101
service.addrTypes = AJ_ADDR_TCP4;
status = AJ_Discover(serviceName, &service, timeout, selectionTimeout);
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_Connect(): AJ_Discover status=%s\n", AJ_StatusText(status)));
goto ExitConnect;
}
#elif defined(AJ_SERIAL_CONNECTION)
// don't bother with discovery, we are connected to a daemon.
// however, take this opportunity to bring up the serial connection
// in a way that depends on the target
status = AJ_Serial_Up();
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_Connect(): AJ_Serial_Up status=%s\n", AJ_StatusText(status)));
}
#else
status = AJ_Discover(serviceName, &service, timeout, selectionTimeout);
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_Connect(): AJ_Discover status=%s\n", AJ_StatusText(status)));
goto ExitConnect;
}
#endif
status = AJ_Net_Connect(bus, &service);
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_Connect(): AJ_Net_Connect status=%s\n", AJ_StatusText(status)));
goto ExitConnect;
}
#ifdef AJ_SERIAL_CONNECTION
// run the state machine for long enough to (hopefully) do the SLAP handshake
do {
AJ_StateMachine();
AJ_InitTimer(&now);
} while (AJ_SerialLinkParams.linkState != AJ_LINK_ACTIVE && AJ_GetTimeDifference(&now, &start) < timeout);
if (AJ_SerialLinkParams.linkState != AJ_LINK_ACTIVE) {
AJ_InfoPrintf(("Failed to establish active SLAP connection in %u msec\n", timeout));
AJ_SerialShutdown();
return AJ_ERR_TIMEOUT;
}
#endif
status = AJ_Authenticate(bus);
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_Connect(): AJ_Authenticate status=%s\n", AJ_StatusText(status)));
goto ExitConnect;
}
status = SetSignalRules(bus);
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_Connect(): SetSignalRules status=%s\n", AJ_StatusText(status)));
goto ExitConnect;
}
ExitConnect:
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_Connect(): status=%s\n", AJ_StatusText(status)));
AJ_Disconnect(bus);
}
AJ_InitRoutingNodeResponselist();
return status;
}
AJ_Status AJ_Connect(AJ_BusAttachment* bus, const char* serviceName, uint32_t timeout)
{
AJ_Status status;
AJ_SASL_Context sasl;
AJ_Service service;
/*
* Clear the bus struct
*/
memset(bus, 0, sizeof(AJ_BusAttachment));
/*
* Clear stale name->GUID mappings
*/
AJ_GUID_ClearNameMap();
/*
* Host-specific network bring-up procedure. This includes establishing a connection to the
* network and initializing the I/O buffers.
*/
status = AJ_Net_Up();
if (status != AJ_OK) {
return status;
}
/*
* Discover a daemon or service to connect to
*/
if (!serviceName) {
serviceName = daemonService;
}
#if AJ_CONNECT_LOCALHOST
service.ipv4port = 9955;
#if HOST_IS_LITTLE_ENDIAN
service.ipv4 = 0x0100007F; // 127.0.0.1
#endif
#if HOST_IS_BIG_ENDIAN
service.ipv4 = 0x7f000001; // 127.0.0.1
#endif
service.addrTypes = AJ_ADDR_IPV4;
#elif defined ARDUINO
service.ipv4port = 9955;
service.ipv4 = 0x6501A8C0; // 192.168.1.101
service.addrTypes = AJ_ADDR_IPV4;
status = AJ_Discover(serviceName, &service, timeout);
if (status != AJ_OK) {
goto ExitConnect;
}
#elif defined AJ_SERIAL_CONNECTION
// don't bother with discovery, we are connected to a daemon.
#else
status = AJ_Discover(serviceName, &service, timeout);
if (status != AJ_OK) {
goto ExitConnect;
}
#endif
status = AJ_Net_Connect(&bus->sock, service.ipv4port, service.addrTypes & AJ_ADDR_IPV4, &service.ipv4);
if (status != AJ_OK) {
goto ExitConnect;
}
/*
* Send initial NUL byte
*/
bus->sock.tx.writePtr[0] = 0;
bus->sock.tx.writePtr += 1;
status = bus->sock.tx.send(&bus->sock.tx);
if (status != AJ_OK) {
goto ExitConnect;
}
AJ_SASL_InitContext(&sasl, mechList, AJ_AUTH_RESPONDER, busAuthPwdFunc);
while (TRUE) {
status = AuthAdvance(&sasl, &bus->sock.rx, &bus->sock.tx);
if ((status != AJ_OK) || (sasl.state == AJ_SASL_FAILED)) {
break;
}
if (sasl.state == AJ_SASL_AUTHENTICATED) {
status = SendHello(bus);
break;
}
}
if (status == AJ_OK) {
AJ_Message helloResponse;
status = AJ_UnmarshalMsg(bus, &helloResponse, 5000);
if (status == AJ_OK) {
/*
* The only error we might get is a timeout
*/
if (helloResponse.hdr->msgType == AJ_MSG_ERROR) {
status = AJ_ERR_TIMEOUT;
} else {
AJ_Arg arg;
status = AJ_UnmarshalArg(&helloResponse, &arg);
if (status == AJ_OK) {
if (arg.len >= (sizeof(bus->uniqueName) - 1)) {
status = AJ_ERR_RESOURCES;
} else {
memcpy(bus->uniqueName, arg.val.v_string, arg.len);
bus->uniqueName[arg.len] = '\0';
}
}
}
AJ_CloseMsg(&helloResponse);
}
}
ExitConnect:
if (status != AJ_OK) {
AJ_Printf("AllJoyn connect failed %d\n", status);
AJ_Disconnect(bus);
}
return status;
}
static AJ_Status ConnectToBus(AJ_BusAttachment* bus)
{
AJ_Status status;
AJ_Service service;
uint32_t timeout = AJ_CONNECT_TIMEOUT;
#ifdef AJ_SERIAL_CONNECTION
AJ_Time start, now;
AJ_InitTimer(&start);
#endif
AJ_InfoPrintf(("AJ_Connect(bus=0x%p, serviceName=\"%s\", timeout=%d.)\n", bus, serviceName, timeout));
/*
* Clear the bus struct
*/
memset(bus, 0, sizeof(AJ_BusAttachment));
/*
* Clear stale name->GUID mappings
*/
AJ_GUID_ClearNameMap();
/*
* First we need to discover a routing node. This is done with the function AJ_Discover.
* It will store the connection information in the AJ_Service struct.
*/
#if AJ_CONNECT_LOCALHOST
service.ipv4port = 9955;
#if HOST_IS_LITTLE_ENDIAN
service.ipv4 = 0x0100007F; // 127.0.0.1
#endif
#if HOST_IS_BIG_ENDIAN
service.ipv4 = 0x7f000001; // 127.0.0.1
#endif
service.addrTypes = AJ_ADDR_IPV4;
#elif defined ARDUINO
service.ipv4port = 9955;
service.ipv4 = 0x6501A8C0; // 192.168.1.101
service.addrTypes = AJ_ADDR_IPV4;
status = AJ_Discover(serviceName, &service, timeout);
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_Connect(): AJ_Discover status=%s\n", AJ_StatusText(status)));
goto ExitConnect;
}
#elif defined AJ_SERIAL_CONNECTION
// don't bother with discovery, we are connected to a daemon.
// however, take this opportunity to bring up the serial connection
status = AJ_Serial_Up();
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_Connect(): AJ_Serial_Up status=%s\n", AJ_StatusText(status)));
}
#else
status = AJ_Discover(serviceName, &service, timeout);
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_Connect(): AJ_Discover status=%s\n", AJ_StatusText(status)));
goto ExitConnect;
}
#endif
/*
* Now that we have discovered a routing node, we can connect to it. This is done with AJ_Net_Connect.
*/
status = AJ_Net_Connect(&bus->sock, service.ipv4port, service.addrTypes & AJ_ADDR_IPV4, &service.ipv4);
if (status != AJ_OK) {
// or retry discovery to find another node that will accept our connection
AJ_InfoPrintf(("AJ_Connect(): AJ_Net_Connect status=%s\n", AJ_StatusText(status)));
goto ExitConnect;
}
#ifdef AJ_SERIAL_CONNECTION
// run the state machine for long enough to (hopefully) do the SLAP handshake
do {
AJ_StateMachine();
AJ_InitTimer(&now);
} while (AJ_SerialLinkParams.linkState != AJ_LINK_ACTIVE && AJ_GetTimeDifference(&now, &start) < timeout);
if (AJ_SerialLinkParams.linkState != AJ_LINK_ACTIVE) {
AJ_InfoPrintf(("Failed to establish active SLAP connection in %u msec\n", timeout));
AJ_SerialShutdown();
return AJ_ERR_TIMEOUT;
}
#endif
/*
* We are connected to a routing node! We still need to authenticate with it
* before it will route our messages.
*/
status = AJ_Authenticate(bus);
ExitConnect:
if (status != AJ_OK) {
AJ_InfoPrintf(("AJ_Connect(): status=%s\n", AJ_StatusText(status)));
AJ_Disconnect(bus);
}
return status;
}
