// Function Specification
//
// Name: amec_calc_dps_util_counters
//
// Description: Calculate the performance counter for a core.
//
// End Function Specification
void amec_calc_dps_util_counters(const uint8_t i_core_id)
{
/*------------------------------------------------------------------------*/
/* Local Variables */
/*------------------------------------------------------------------------*/
amec_part_t *l_part = NULL;
amec_core_perf_counter_t *l_perf = NULL;
sensor_ptr_t l_sensor = NULL;
uint16_t l_utilization = 0;
/*------------------------------------------------------------------------*/
/* Code */
/*------------------------------------------------------------------------*/
l_perf = &g_amec->proc[0].core[i_core_id].core_perf;
// Read sensor for this core
l_sensor = AMECSENSOR_ARRAY_PTR(UTIL2MSP0C0, i_core_id);
l_utilization = l_sensor->sample;
l_part = amec_part_find_by_core(&g_amec->part_config, i_core_id);
// Type 41 input: Check if core's utilization is within
// epsilon of the slack threshold: if yes declare the core
// active
if (l_part != NULL)
{
if (l_utilization > (l_part->dpsalg.tlutil - l_part->dpsalg.epsilon_perc))
{
// indicate core is active
l_perf->util_active_core_counter++;
if (l_utilization < l_part->dpsalg.tlutil)
{
// indicate core has some slack
l_perf->util_slack_core_counter++;
}
}
}
}
// Function Specification
//
// Name: amec_slv_voting_box
//
// Description: Slave OCC's voting box that decides the frequency request.
// This function will run every tick.
//
// Thread: RealTime Loop
//
// Task Flags:
//
// End Function Specification
void amec_slv_voting_box(void)
{
/*------------------------------------------------------------------------*/
/* Local Variables */
/*------------------------------------------------------------------------*/
uint16_t k = 0;
uint16_t l_chip_fmax = g_amec->sys.fmax;
uint16_t l_core_freq = 0;
uint32_t l_chip_reason = 0;
uint32_t l_core_reason = 0;
uint8_t l_kvm_throt_reason = NO_THROTTLE;
amec_part_t *l_part = NULL;
bool l_freq_req_changed = FALSE;
/*------------------------------------------------------------------------*/
/* Code */
/*------------------------------------------------------------------------*/
// Voting Box for CPU speed.
// This function implements the voting box to decide which input gets the right
// to actuate the system.
//Reset the maximum core frequency requested prior to recalculation.
g_amec->proc[0].core_max_freq = 0;
// PPB_FMAX
if(g_amec->proc[0].pwr_votes.ppb_fmax < l_chip_fmax)
{
l_chip_fmax = g_amec->proc[0].pwr_votes.ppb_fmax;
l_chip_reason = AMEC_VOTING_REASON_PPB;
l_kvm_throt_reason = POWERCAP;
}
// PMAX_CLIP_FREQ
if(g_amec->proc[0].pwr_votes.pmax_clip_freq < l_chip_fmax)
{
l_chip_fmax = g_amec->proc[0].pwr_votes.pmax_clip_freq;
l_chip_reason = AMEC_VOTING_REASON_PMAX;
l_kvm_throt_reason = POWER_SUPPLY_FAILURE;
}
// Pmax_clip frequency request if there is an APSS failure
if(g_amec->proc[0].pwr_votes.apss_pmax_clip_freq < l_chip_fmax)
{
l_chip_fmax = g_amec->proc[0].pwr_votes.apss_pmax_clip_freq;
l_chip_reason = AMEC_VOTING_REASON_APSS_PMAX;
l_kvm_throt_reason = POWER_SUPPLY_FAILURE;
}
//THERMALPROC.FREQ_REQUEST
//Thermal controller input based on processor temperature
if(g_amec->thermalproc.freq_request < l_chip_fmax)
{
l_chip_fmax = g_amec->thermalproc.freq_request;
l_chip_reason = AMEC_VOTING_REASON_PROC_THRM;
l_kvm_throt_reason = CPU_OVERTEMP;
}
// Controller request based on VRHOT signal from processor regulator
if(g_amec->vrhotproc.freq_request < l_chip_fmax)
{
l_chip_fmax = g_amec->vrhotproc.freq_request;
l_chip_reason = AMEC_VOTING_REASON_VRHOT_THRM;
l_kvm_throt_reason = CPU_OVERTEMP;
}
// CONN_OC_VOTE
if(g_amec->proc[0].pwr_votes.conn_oc_vote < l_chip_fmax)
{
l_chip_fmax = g_amec->proc[0].pwr_votes.conn_oc_vote;
l_chip_reason = AMEC_VOTING_REASON_CONN_OC;
l_kvm_throt_reason = OVERCURRENT;
}
for (k=0; k<MAX_NUM_CORES; k++)
{
if(CORE_PRESENT(k))
{
l_core_freq = l_chip_fmax;
l_core_reason = l_chip_reason;
// Disable DPS in KVM
if(!G_sysConfigData.system_type.kvm)
{
l_part = amec_part_find_by_core(&g_amec->part_config, k);
// Check frequency request generated by DPS algorithms
if(g_amec->proc[0].core[k].core_perf.dps_freq_request < l_core_freq)
{
l_core_freq = g_amec->proc[0].core[k].core_perf.dps_freq_request;
l_core_reason = AMEC_VOTING_REASON_UTIL;
}
// Adjust frequency based on soft frequency boundaries
if(l_part != NULL)
{
if(l_core_freq < l_part->soft_fmin)
{
// Before enforcing a soft Fmin, make sure we don't
// have a thermal or power emergency
if(!(l_chip_reason & (AMEC_VOTING_REASON_PROC_THRM |
AMEC_VOTING_REASON_VRHOT_THRM |
AMEC_VOTING_REASON_PPB |
AMEC_VOTING_REASON_PMAX |
AMEC_VOTING_REASON_CONN_OC)))
{
l_core_freq = l_part->soft_fmin;
l_core_reason = AMEC_VOTING_REASON_SOFT_MIN;
}
}
else if(l_core_freq > l_part->soft_fmax)
{
l_core_freq = l_part->soft_fmax;
l_core_reason = AMEC_VOTING_REASON_SOFT_MAX;
}
}
}
if(CURRENT_MODE() == OCC_MODE_NOMINAL)
{
// PROC_PCAP_NOM_VOTE
if(g_amec->proc[0].pwr_votes.proc_pcap_nom_vote < l_core_freq)
{
l_core_freq = g_amec->proc[0].pwr_votes.proc_pcap_nom_vote;
l_core_reason = AMEC_VOTING_REASON_PWR;
l_kvm_throt_reason = POWERCAP;
}
}
else
{
// PROC_PCAP_VOTE
if(g_amec->proc[0].pwr_votes.proc_pcap_vote < l_core_freq)
{
l_core_freq = g_amec->proc[0].pwr_votes.proc_pcap_vote;
l_core_reason = AMEC_VOTING_REASON_PWR;
l_kvm_throt_reason = POWERCAP;
}
}
// Check IPS frequency request sent by Master OCC
if(g_amec->slv_ips_freq_request != 0)
{
if(g_amec->slv_ips_freq_request < l_core_freq)
{
l_core_freq = g_amec->slv_ips_freq_request;
l_core_reason = AMEC_VOTING_REASON_IPS;
}
}
// Override frequency with request from Master OCC
if(g_amec->foverride_enable)
{
if(g_amec->foverride != 0)
{
// Override the frequency on all cores if Master OCC sends
// a non-zero request
l_core_freq = g_amec->foverride;
l_core_reason = AMEC_VOTING_REASON_OVERRIDE;
}
}
if(g_amec->pstate_foverride_enable)
{
if(g_amec->pstate_foverride != 0)
{
// Override the frequency on all cores if the Global Pstate
// table has been modified
l_core_freq = g_amec->pstate_foverride;
l_core_reason = AMEC_VOTING_REASON_OVERRIDE;
}
}
//Make sure the frequency is not less then the system min
if(l_core_freq < g_amec->sys.fmin)
{
l_core_freq = g_amec->sys.fmin;
}
// Override frequency via Amester parameter interface
if (g_amec->proc[0].parm_f_override_enable &&
g_amec->proc[0].parm_f_override[k] > 0)
{
l_core_freq = g_amec->proc[0].parm_f_override[k];
l_core_reason = AMEC_VOTING_REASON_OVERRIDE_CORE;
}
// If frequency has changed, set the flag
if ( (l_core_freq != g_amec->proc[0].core[k].f_request) ||
(l_core_freq != g_amec->sys.fmax))
{
l_freq_req_changed = TRUE;
}
//STORE core frequency and reason
g_amec->proc[0].core[k].f_request = l_core_freq;
g_amec->proc[0].core[k].f_reason = l_core_reason;
// Update the Amester parameter telling us the reason. Needed for
// parameter array.
g_amec->proc[0].parm_f_reason[k] = l_core_reason;
//CURRENT_MODE() may be OCC_MODE_NOCHANGE because STATE change is processed
//before MODE change
if ((CURRENT_MODE() != OCC_MODE_DYN_POWER_SAVE) &&
(CURRENT_MODE() != OCC_MODE_DYN_POWER_SAVE_FP) &&
(CURRENT_MODE() != OCC_MODE_NOCHANGE) &&
(l_core_reason & NON_DPS_POWER_LIMITED))
{
G_non_dps_power_limited = TRUE;
}
else
{
G_non_dps_power_limited = FALSE;
}
// Update the sensor telling us what the requested frequency is
sensor_update( AMECSENSOR_ARRAY_PTR(FREQ250USP0C0,k),
(uint16_t) g_amec->proc[0].core[k].f_request);
#if 0
/// TODO: This can be deleted if deemed useless
/// This trace that can be used to debug the voting
/// box an control loops. It will trace the reason why a
/// controller is lowering the freq, but will only do it once in a
/// row for the specific freq it wants to control to. It assumes
/// that all cores will be controlled to same freq.
if(l_chip_fmax != g_amec->sys.fmax){
static uint16_t L_trace = 0;
if(l_chip_fmax != L_trace){
L_trace = l_chip_fmax;
TRAC_INFO("Core: %d, Freq: %d, Reason: %d",k,l_core_freq,l_core_reason);
}
}
#endif
if(l_core_freq > g_amec->proc[0].core_max_freq)
{
g_amec->proc[0].core_max_freq = l_core_freq;
}
}
else
{
l_core_freq = 0;
l_core_reason = 0;
}
}//End of for loop
// Check if the frequency is going to be changing
if( l_freq_req_changed == TRUE )
{
G_time_until_freq_check = FREQ_CHG_CHECK_TIME;
}
else if (G_time_until_freq_check != 0)
{
G_time_until_freq_check--;
}
//convert POWERCAP reason to POWER_SUPPLY_FAILURE if ovs/failsafe is asserted
if((l_kvm_throt_reason == POWERCAP) &&
(AMEC_INTF_GET_FAILSAFE() || AMEC_INTF_GET_OVERSUBSCRIPTION()))
{
l_kvm_throt_reason = POWER_SUPPLY_FAILURE;
}
//check if we need to update the throttle reason in homer
if(G_sysConfigData.system_type.kvm &&
(l_kvm_throt_reason != G_amec_kvm_throt_reason))
{
//Notify dcom thread to update the table
G_amec_kvm_throt_reason = l_kvm_throt_reason;
ssx_semaphore_post(&G_dcomThreadWakeupSem);
}
}
//*************************************************************************
// Functions
//*************************************************************************
void amec_vectorize_core_sensor(sensor_t * l_sensor,
vectorSensor_t * l_vector,
const VECTOR_SENSOR_OP l_op,
uint16_t l_sensor_elem_array_gsid)
{
#define VECTOR_CREATE_FAILURE 1
#define VECTOR_ADD_ELEM_FAILURE 2
int l_idx = 0; // Used to index the for loops for vector create
int l_rc = 0; // Indicates failure to add a sensor to vector
uint16_t l_gsid = 0xFFFF;
errlHndl_t l_err = NULL;
do
{
// Grab GSID for errl in case of failure
l_gsid = l_sensor->gsid;
// Vectorize the sensor
sensor_vectorize(l_sensor,
l_vector,
l_op);
// If vectorize worked, add elements to the vector sensor
if(NULL != l_sensor->vector)
{
// Loop through cores
for(l_idx = 0; l_idx < MAX_NUM_CORES; l_idx++)
{
// Add elements to the vector sensor
sensor_vector_elem_add(l_sensor->vector,
l_idx,
AMECSENSOR_ARRAY_PTR(l_sensor_elem_array_gsid, l_idx));
// If core is not present, disable this vector element
if(!CORE_PRESENT(l_idx))
{
sensor_vector_elem_enable(l_sensor->vector,
l_idx,
0 /* Disable */);
}
}
// Sanity check, we should have MAX_NUM_CORES entries in
// vector sensor
if(l_sensor->vector->size != MAX_NUM_CORES)
{
// Set l_rc and break out so that we can create an errl
l_rc = VECTOR_ADD_ELEM_FAILURE;
break;
}
}
else
{
// Set l_rc and break out so that we can create an errl
l_rc = VECTOR_CREATE_FAILURE;
break;
}
}while(0);
if(l_rc)
{
//If fail to create pore flex object then there is a problem.
TRAC_ERR("Failed to vectorize sensor[0x%x, 0x%x]", l_gsid, l_rc );
/* @
* @errortype
* @moduleid AMEC_VECTORIZE_FW_SENSORS
* @reasoncode SSX_GENERIC_FAILURE
* @userdata1 return code
* @userdata2 gsid of failed sensor
* @userdata4 OCC_NO_EXTENDED_RC
* @devdesc Firmware failure in call to vectorize sensor
*/
l_err = createErrl(
AMEC_VECTORIZE_FW_SENSORS, //modId
SSX_GENERIC_FAILURE, //reasoncode
OCC_NO_EXTENDED_RC, //Extended reason code
ERRL_SEV_UNRECOVERABLE, //Severity
NULL,//TODO: create trace //Trace Buf
DEFAULT_TRACE_SIZE, //Trace Size
l_rc, //userdata1
l_gsid //userdata2
);
REQUEST_RESET(l_err);
}
}
// Function Specification
//
// Name: amec_dps_main
//
// Description: Main DPS function.
//
// End Function Specification
void amec_dps_main(void)
{
/*------------------------------------------------------------------------*/
/* Local Variables */
/*------------------------------------------------------------------------*/
uint16_t l_idx = 0;
/*------------------------------------------------------------------------*/
/* Code */
/*------------------------------------------------------------------------*/
// First, update the utilization variables for all cores
amec_dps_update_core_util();
// Loop through all core groups and apply energy-savings policy
for (l_idx=0; l_idx<AMEC_PART_MAX_PART; l_idx++)
{
if (!g_amec->part_config.part_list[l_idx].valid)
{
continue;
}
if (g_amec->part_config.part_list[l_idx].ncores == 0)
{
continue;
}
switch (g_amec->part_config.part_list[l_idx].es_policy)
{
case OCC_INTERNAL_MODE_DPS:
case OCC_INTERNAL_MODE_DPS_MP:
amec_dps_partition_update_sensors(l_idx);
amec_dps_partition_alg(l_idx);
break;
default:
// No energy-savings policy: DPS vote is already disabled when
// policy first selected for partition or core ownership
// changes (amec_part.c)
break;
}
}
// For GA1, we need to send the Fwish to the Master OCC
if ((g_amec->part_config.part_list[0].es_policy == OCC_INTERNAL_MODE_DPS) ||
(g_amec->part_config.part_list[0].es_policy == OCC_INTERNAL_MODE_DPS_MP))
{
// If this core group policy is one of the DPS modes, then send the
// frequency request from the DPS algorithm
G_dcom_slv_outbox_tx.fwish =
g_amec->part_config.part_list[0].dpsalg.freq_request;
}
else
{
// Else, send the nominal frequency of the system
G_dcom_slv_outbox_tx.fwish =
g_amec->part_mode_freq[OCC_INTERNAL_MODE_NOM].fmax;
}
// We also need to send the Factual to the Master OCC
for (l_idx=0; l_idx<MAX_NUM_CORES; l_idx++)
{
// Find the first valid core and send its frequency
if (CORE_PRESENT(l_idx))
{
G_dcom_slv_outbox_tx.factual =
AMECSENSOR_ARRAY_PTR(FREQ250USP0C0,l_idx)->sample;
break;
}
}
}
// Function Specification
//
// Name: amec_slv_proc_voting_box
//
// Description: Slave OCC's voting box that decides the frequency request.
// This function will run every tick.
//
// Thread: RealTime Loop
//
// Task Flags:
//
// End Function Specification
void amec_slv_proc_voting_box(void)
{
/*------------------------------------------------------------------------*/
/* Local Variables */
/*------------------------------------------------------------------------*/
uint16_t k = 0;
uint16_t l_chip_fmax = g_amec->sys.fmax;
uint16_t l_core_freq = 0;
uint16_t l_core_freq_max = 0; // max freq across all cores
uint16_t l_core_freq_min = g_amec->sys.fmax; // min freq across all cores
uint32_t l_current_reason = 0; // used for debug purposes
static uint32_t L_last_reason = 0; // used for debug purposes
uint32_t l_chip_reason = 0;
uint32_t l_core_reason = 0;
amec_proc_voting_reason_t l_kvm_throt_reason = NO_THROTTLE;
amec_part_t *l_part = NULL;
// frequency threshold for reporting throttling
uint16_t l_report_throttle_freq = G_sysConfigData.system_type.report_dvfs_nom ? G_sysConfigData.sys_mode_freq.table[OCC_MODE_NOMINAL] : G_sysConfigData.sys_mode_freq.table[OCC_MODE_TURBO];
/*------------------------------------------------------------------------*/
/* Code */
/*------------------------------------------------------------------------*/
if (!G_allowPstates)
{
// Don't allow pstates to be sent until after initial mode has been set
if ( (CURRENT_MODE()) || (G_sysConfigData.system_type.kvm) )
{
G_allowPstates = TRUE;
}
}
// Voting Box for CPU speed.
// This function implements the voting box to decide which input gets the right
// to actuate the system.
// check for oversubscription if redundant ps policy (oversubscription) is being enforced
if (G_sysConfigData.system_type.non_redund_ps == false)
{
// If in oversubscription and there is a defined (non 0) OVERSUB frequency less than max then use it
if( (AMEC_INTF_GET_OVERSUBSCRIPTION()) &&
(G_sysConfigData.sys_mode_freq.table[OCC_MODE_OVERSUB]) &&
(G_sysConfigData.sys_mode_freq.table[OCC_MODE_OVERSUB] < l_chip_fmax) )
{
l_chip_fmax = G_sysConfigData.sys_mode_freq.table[OCC_MODE_OVERSUB];
l_chip_reason = AMEC_VOTING_REASON_OVERSUB;
}
}
// If there is an active VRM fault and a defined (non 0) VRM N frequency less than max use it
if( (g_amec->sys.vrm_fault_status) &&
(G_sysConfigData.sys_mode_freq.table[OCC_MODE_VRM_N]) &&
(G_sysConfigData.sys_mode_freq.table[OCC_MODE_VRM_N] < l_chip_fmax) )
{
l_chip_fmax = G_sysConfigData.sys_mode_freq.table[OCC_MODE_VRM_N];
l_chip_reason = AMEC_VOTING_REASON_VRM_N;
}
// PPB_FMAX
if(g_amec->proc[0].pwr_votes.ppb_fmax < l_chip_fmax)
{
l_chip_fmax = g_amec->proc[0].pwr_votes.ppb_fmax;
l_chip_reason = AMEC_VOTING_REASON_PPB;
if(l_report_throttle_freq <= l_chip_fmax)
{
l_kvm_throt_reason = PCAP_EXCEED_REPORT;
}
else
{
l_kvm_throt_reason = POWERCAP;
}
}
// PMAX_CLIP_FREQ
if(g_amec->proc[0].pwr_votes.pmax_clip_freq < l_chip_fmax)
{
l_chip_fmax = g_amec->proc[0].pwr_votes.pmax_clip_freq;
l_chip_reason = AMEC_VOTING_REASON_PMAX;
l_kvm_throt_reason = POWER_SUPPLY_FAILURE;
}
// Pmax_clip frequency request if there is an APSS failure
if(g_amec->proc[0].pwr_votes.apss_pmax_clip_freq < l_chip_fmax)
{
l_chip_fmax = g_amec->proc[0].pwr_votes.apss_pmax_clip_freq;
l_chip_reason = AMEC_VOTING_REASON_APSS_PMAX;
l_kvm_throt_reason = POWER_SUPPLY_FAILURE;
}
//THERMALPROC.FREQ_REQUEST
//Thermal controller input based on processor temperature
if(g_amec->thermalproc.freq_request < l_chip_fmax)
{
l_chip_fmax = g_amec->thermalproc.freq_request;
l_chip_reason = AMEC_VOTING_REASON_PROC_THRM;
if( l_report_throttle_freq <= l_chip_fmax)
{
l_kvm_throt_reason = PROC_OVERTEMP_EXCEED_REPORT;
}
else
{
l_kvm_throt_reason = CPU_OVERTEMP;
}
}
//Thermal controller input based on VRM Vdd temperature
if(g_amec->thermalvdd.freq_request < l_chip_fmax)
{
l_chip_fmax = g_amec->thermalvdd.freq_request;
l_chip_reason = AMEC_VOTING_REASON_VDD_THRM;
if( l_report_throttle_freq <= l_chip_fmax)
{
l_kvm_throt_reason = VDD_OVERTEMP_EXCEED_REPORT;
}
else
{
l_kvm_throt_reason = VDD_OVERTEMP;
}
}
for (k=0; k<MAX_NUM_CORES; k++)
{
if( CORE_PRESENT(k) && !CORE_OFFLINE(k) )
{
l_core_freq = l_chip_fmax;
l_core_reason = l_chip_reason;
// Disable DPS in KVM
if(!G_sysConfigData.system_type.kvm)
{
l_part = amec_part_find_by_core(&g_amec->part_config, k);
// Check frequency request generated by DPS algorithms
if(g_amec->proc[0].core[k].core_perf.dps_freq_request < l_core_freq)
{
l_core_freq = g_amec->proc[0].core[k].core_perf.dps_freq_request;
l_core_reason = AMEC_VOTING_REASON_UTIL;
}
// Adjust frequency based on soft frequency boundaries
if(l_part != NULL)
{
if(l_core_freq < l_part->soft_fmin)
{
// Before enforcing a soft Fmin, make sure we don't
// have a thermal or power emergency
if(!(l_chip_reason & (AMEC_VOTING_REASON_PROC_THRM |
AMEC_VOTING_REASON_VDD_THRM |
AMEC_VOTING_REASON_PPB |
AMEC_VOTING_REASON_PMAX |
AMEC_VOTING_REASON_CONN_OC)))
{
l_core_freq = l_part->soft_fmin;
l_core_reason = AMEC_VOTING_REASON_SOFT_MIN;
}
}
else if(l_core_freq > l_part->soft_fmax)
{
l_core_freq = l_part->soft_fmax;
l_core_reason = AMEC_VOTING_REASON_SOFT_MAX;
}
}
}
if(CURRENT_MODE() == OCC_MODE_NOMINAL)
{
// PROC_PCAP_NOM_VOTE
if(g_amec->proc[0].pwr_votes.proc_pcap_nom_vote < l_core_freq)
{
l_core_freq = g_amec->proc[0].pwr_votes.proc_pcap_nom_vote;
l_core_reason = AMEC_VOTING_REASON_PWR;
l_kvm_throt_reason = POWERCAP;
}
}
else
{
// PROC_PCAP_VOTE
if(g_amec->proc[0].pwr_votes.proc_pcap_vote < l_core_freq)
{
l_core_freq = g_amec->proc[0].pwr_votes.proc_pcap_vote;
l_core_reason = AMEC_VOTING_REASON_PWR;
if(l_report_throttle_freq <= l_core_freq)
{
l_kvm_throt_reason = PCAP_EXCEED_REPORT;
}
else
{
l_kvm_throt_reason = POWERCAP;
}
}
}
// Check IPS frequency request sent by Master OCC
if(g_amec->slv_ips_freq_request != 0)
{
if(g_amec->slv_ips_freq_request < l_core_freq)
{
l_core_freq = g_amec->slv_ips_freq_request;
l_core_reason = AMEC_VOTING_REASON_IPS;
}
}
// Override frequency with request from Master OCC
if(g_amec->foverride_enable)
{
if(g_amec->foverride != 0)
{
// Override the frequency on all cores if Master OCC sends
// a non-zero request
l_core_freq = g_amec->foverride;
l_core_reason = AMEC_VOTING_REASON_OVERRIDE;
}
l_kvm_throt_reason = MANUFACTURING_OVERRIDE;
}
if(g_amec->pstate_foverride_enable)
{
if(g_amec->pstate_foverride != 0)
{
// Override the frequency on all cores if the Global Pstate
// table has been modified
l_core_freq = g_amec->pstate_foverride;
l_core_reason = AMEC_VOTING_REASON_OVERRIDE;
}
}
//Make sure the frequency is not less then the system min
if(l_core_freq < g_amec->sys.fmin)
{
l_core_freq = g_amec->sys.fmin;
}
// Override frequency via Amester parameter interface
if (g_amec->proc[0].parm_f_override_enable &&
g_amec->proc[0].parm_f_override[k] > 0)
{
l_core_freq = g_amec->proc[0].parm_f_override[k];
l_core_reason = AMEC_VOTING_REASON_OVERRIDE_CORE;
}
//STORE core frequency and reason
g_amec->proc[0].core[k].f_request = l_core_freq;
g_amec->proc[0].core[k].f_reason = l_core_reason;
if(l_core_freq < l_core_freq_min)
{
// store the new lowest frequency and reason to be used after all cores checked
l_core_freq_min = l_core_freq;
l_current_reason = l_core_reason;
}
// Update the Amester parameter telling us the reason. Needed for
// parameter array.
g_amec->proc[0].parm_f_reason[k] = l_core_reason;
//CURRENT_MODE() may be OCC_MODE_NOCHANGE because STATE change is processed
//before MODE change
if ((CURRENT_MODE() != OCC_MODE_DYN_POWER_SAVE) &&
(CURRENT_MODE() != OCC_MODE_DYN_POWER_SAVE_FP) &&
(CURRENT_MODE() != OCC_MODE_NOM_PERFORMANCE) &&
(CURRENT_MODE() != OCC_MODE_MAX_PERFORMANCE) &&
(CURRENT_MODE() != OCC_MODE_FMF) &&
(CURRENT_MODE() != OCC_MODE_NOCHANGE) &&
(l_core_reason & NON_DPS_POWER_LIMITED))
{
G_non_dps_power_limited = TRUE;
}
else
{
G_non_dps_power_limited = FALSE;
}
// Update the sensor telling us what the requested frequency is
sensor_update( AMECSENSOR_ARRAY_PTR(FREQREQC0,k),
(uint16_t) g_amec->proc[0].core[k].f_request);
#if DEBUG_PROC_VOTING_BOX
/// This trace that can be used to debug the voting
/// box and control loops. It will trace the reason why a
/// controller is lowering the freq, but will only do it once in a
/// row for the specific freq it wants to control to. It assumes
/// that all cores will be controlled to same freq.
if(l_chip_fmax != g_amec->sys.fmax){
static uint16_t L_trace = 0;
if(l_chip_fmax != L_trace){
L_trace = l_chip_fmax;
TRAC_INFO("Core: %d, Freq: %d, Reason: %d",k,l_core_freq,l_core_reason);
}
}
#endif
if(l_core_freq > l_core_freq_max)
{
l_core_freq_max = l_core_freq;
}
} // if core present and not offline
else
{
//Set f_request to 0 so this core is ignored in amec_slv_freq_smh()
g_amec->proc[0].core[k].f_request = 0;
g_amec->proc[0].core[k].f_reason = 0;
}
}//End of for loop
// update max core frequency if not 0 i.e. all cores offline (stop 2 or greater)
// this is used by power capping alg, updating to 0 will cause power throttling when not needed
if(l_core_freq_max)
{
g_amec->proc[0].core_max_freq = l_core_freq_max;
// update the overall reason driving frequency across all cores
g_amec->proc[0].f_reason = l_current_reason;
}
//check if there was a throttle reason change
if(l_kvm_throt_reason != G_amec_opal_proc_throt_reason)
{
//Always update G_amec_opal_proc_throt_reason, this is used to set poll rsp bits for all system types
G_amec_opal_proc_throt_reason = l_kvm_throt_reason;
// Only if running OPAL need to notify dcom thread to update the table in HOMER for OPAL
if(G_sysConfigData.system_type.kvm)
{
ssx_semaphore_post(&G_dcomThreadWakeupSem);
}
}
// For debug... if lower than max update vars returned in poll response to give clipping reason
g_amec->proc[0].core_min_freq = l_core_freq_min;
if(l_core_freq_min < g_amec->sys.fmax)
{
if(l_current_reason == L_last_reason)
{
// same reason INC counter
if(g_amec->proc[0].current_clip_count != 0xFF)
{
g_amec->proc[0].current_clip_count++;
}
}
else
{
// new reason update history and set counter to 1
L_last_reason = l_current_reason;
g_amec->proc[0].current_clip_count = 1;
if( (g_amec->proc[0].chip_f_reason_history & l_current_reason) == 0)
{
g_amec->proc[0].chip_f_reason_history |= l_current_reason;
TRAC_IMP("First time throttling for reason[0x%08X] History[0x%08X] freq = %d",
l_current_reason, g_amec->proc[0].chip_f_reason_history, l_core_freq_min);
}
}
}
else // no active clipping
{
L_last_reason = 0;
g_amec->proc[0].current_clip_count = 0;
}
}
void amec_update_fw_sensors(void)
{
errlHndl_t l_err = NULL;
int rc = 0;
int rc2 = 0;
static bool l_first_call = TRUE;
bool l_gpe0_idle, l_gpe1_idle;
static int L_consec_trace_count = 0;
// ------------------------------------------------------
// Update OCC Firmware Sensors from last tick
// ------------------------------------------------------
int l_last_state = G_fw_timing.amess_state;
// RTLtickdur = duration of last tick's RTL ISR (max = 250us)
sensor_update( AMECSENSOR_PTR(RTLtickdur), G_fw_timing.rtl_dur);
// AMEintdur = duration of last tick's AMEC portion of RTL ISR
sensor_update( AMECSENSOR_PTR(AMEintdur), G_fw_timing.ameint_dur);
// AMESSdurX = duration of last tick's AMEC state
if(l_last_state >= NUM_AMEC_SMH_STATES)
{
// Sanity check. Trace this out, even though it should never happen.
TRAC_INFO("AMEC State Invalid, Sensor Not Updated");
}
else
{
// AMESSdurX = duration of last tick's AMEC state
sensor_update( AMECSENSOR_ARRAY_PTR(AMESSdur0, l_last_state), G_fw_timing.amess_dur);
}
// ------------------------------------------------------
// Kick off GPE programs to track WorstCase time in GPE
// and update the sensors.
// ------------------------------------------------------
if( (NULL != G_fw_timing.gpe0_timing_request)
&& (NULL != G_fw_timing.gpe1_timing_request) )
{
//Check if both GPE engines were able to complete the last GPE job on
//the queue within 1 tick.
l_gpe0_idle = async_request_is_idle(&G_fw_timing.gpe0_timing_request->request);
l_gpe1_idle = async_request_is_idle(&G_fw_timing.gpe1_timing_request->request);
if(l_gpe0_idle && l_gpe1_idle)
{
//reset the consecutive trace count
L_consec_trace_count = 0;
//Both GPE engines finished on time. Now check if they were
//successful too.
if( async_request_completed(&(G_fw_timing.gpe0_timing_request->request))
&& async_request_completed(&(G_fw_timing.gpe1_timing_request->request)) )
{
// GPEtickdur0 = duration of last tick's PORE-GPE0 duration
sensor_update( AMECSENSOR_PTR(GPEtickdur0), G_fw_timing.gpe_dur[0]);
// GPEtickdur1 = duration of last tick's PORE-GPE1 duration
sensor_update( AMECSENSOR_PTR(GPEtickdur1), G_fw_timing.gpe_dur[1]);
}
else
{
//This case is expected on the first call of the function.
//After that, this should not happen.
if(!l_first_call)
{
//Note: FFDC for this case is gathered by each task
//responsible for a GPE job.
TRAC_INFO("GPE task idle but GPE task did not complete");
}
l_first_call = FALSE;
}
// Update Time used to measure GPE duration.
G_fw_timing.rtl_start_gpe = G_fw_timing.rtl_start;
// Schedule the GPE Routines that will run and update the worst
// case timings (via callback) after they complete. These GPE
// routines are the last GPE routines added to the queue
// during the RTL tick.
rc = pore_flex_schedule(G_fw_timing.gpe0_timing_request);
rc2 = pore_flex_schedule(G_fw_timing.gpe1_timing_request);
if(rc || rc2)
{
/* @
* @errortype
* @moduleid AMEC_UPDATE_FW_SENSORS
* @reasoncode SSX_GENERIC_FAILURE
* @userdata1 return code - gpe0
* @userdata2 return code - gpe1
* @userdata4 OCC_NO_EXTENDED_RC
* @devdesc Failure to schedule PORE-GPE poreFlex object for FW timing
* analysis.
*/
l_err = createErrl(
AMEC_UPDATE_FW_SENSORS, //modId
SSX_GENERIC_FAILURE, //reasoncode
OCC_NO_EXTENDED_RC, //Extended reason code
ERRL_SEV_INFORMATIONAL, //Severity
NULL, //Trace Buf
DEFAULT_TRACE_SIZE, //Trace Size
rc, //userdata1
rc2); //userdata2
// commit error log
commitErrl( &l_err );
}
}
else if(L_consec_trace_count < MAX_CONSEC_TRACE)
{
uint64_t l_dbg1;
// Reset will eventually be requested due to not having power measurement
// data after X ticks, but add some additional FFDC to the trace that
// will tell us what GPE job is currently executing.
if(!l_gpe0_idle)
{
l_dbg1 = in64(PORE_GPE0_DBG1);
TRAC_ERR("GPE0 programs did not complete within one tick. DBG1[0x%08x%08x]",
l_dbg1 >> 32,
l_dbg1 & 0x00000000ffffffffull);
}
