/* ======================================================================== Routine Description: Channel switching count down process upon radar detection Arguments: pAd Pointer to our adapter ======================================================================== */ VOID ChannelSwitchingCountDownProc( IN PRTMP_ADAPTER pAd) { DBGPRINT(RT_DEBUG_TRACE, ("%s():Channel Switching...(%d/%d)\n", __FUNCTION__, pAd->Dot11_H.CSCount, pAd->Dot11_H.CSPeriod)); pAd->Dot11_H.CSCount++; if (pAd->Dot11_H.CSCount >= pAd->Dot11_H.CSPeriod) { APStop(pAd); APStartUp(pAd); } }
/* ======================================================================== Routine Description: Channel switching count down process upon radar detection Arguments: pAd Pointer to our adapter ======================================================================== */ VOID ChannelSwitchingCountDownProc( IN PRTMP_ADAPTER pAd) { MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_TRACE, ("%s():Channel Switching...(%d/%d)\n", __FUNCTION__, pAd->Dot11_H.CSCount, pAd->Dot11_H.CSPeriod)); pAd->Dot11_H.CSCount++; if (pAd->Dot11_H.CSCount >= pAd->Dot11_H.CSPeriod) { #ifdef DFS_SUPPORT pAd->CommonCfg.RadarDetect.DFSAPRestart = 1; schedule_dfs_task(pAd); #else APStop(pAd); APStartUp(pAd); #endif /* !DFS_SUPPORT */ } }
/* ======================================================================== Routine Description: Arguments: Adapter Pointer to our adapter. Dequeue all power safe delayed braodcast frames after beacon. IRQL = DISPATCH_LEVEL ======================================================================== */ VOID RTMPHandleTBTTInterrupt( IN PRTMP_ADAPTER pAd) { #ifdef CONFIG_AP_SUPPORT POS_COOKIE pObj = (POS_COOKIE) pAd->OS_Cookie; if (pAd->OpMode == OPMODE_AP) { ReSyncBeaconTime(pAd); #ifdef WORKQUEUE_BH schedule_work(&pObj->tbtt_work); #else tasklet_hi_schedule(&pObj->tbtt_task); #endif // WORKQUEUE_BH // if ((pAd->CommonCfg.Channel > 14) && (pAd->CommonCfg.bIEEE80211H == 1) && (pAd->CommonCfg.RadarDetect.RDMode == RD_SWITCHING_MODE)) { DBGPRINT(RT_DEBUG_TRACE, ("RTMPHandlePreTBTTInterrupt::Channel Switching...(%d/%d)\n", pAd->CommonCfg.RadarDetect.CSCount, pAd->CommonCfg.RadarDetect.CSPeriod)); pAd->CommonCfg.RadarDetect.CSCount++; if (pAd->CommonCfg.RadarDetect.CSCount >= pAd->CommonCfg.RadarDetect.CSPeriod) { #ifdef DFS_HARDWARE_SUPPORT pAd->CommonCfg.DFSAPRestart=1; schedule_dfs_task(pAd); #else APStop(pAd); APStartUp(pAd); #endif // DFS_HARDWARE_SUPPORT // } } } else #endif // CONFIG_AP_SUPPORT // { if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) { } } }
static INT scan_ch_restore(RTMP_ADAPTER *pAd, UCHAR OpMode) { #ifdef CONFIG_STA_SUPPORT USHORT Status; #endif /* CONFIG_STA_SUPPORT */ INT bw, ch; if (pAd->CommonCfg.BBPCurrentBW != pAd->hw_cfg.bbp_bw) { rtmp_bbp_set_bw(pAd, pAd->hw_cfg.bbp_bw); AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE); AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel); ch = pAd->CommonCfg.CentralChannel; } else { AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE); AsicLockChannel(pAd, pAd->CommonCfg.Channel); ch = pAd->CommonCfg.Channel; } switch(pAd->CommonCfg.BBPCurrentBW) { case BW_80: bw = 80; break; case BW_40: bw = 40; break; case BW_10: bw = 10; break; case BW_20: default: bw =20; break; } DBGPRINT(RT_DEBUG_TRACE, ("SYNC - End of SCAN, restore to %dMHz channel %d, Total BSS[%02d]\n", bw, ch, pAd->ScanTab.BssNr)); #ifdef CONFIG_STA_SUPPORT if (OpMode == OPMODE_STA) { /* If all peer Ad-hoc clients leave, driver would do LinkDown and LinkUp. In LinkUp, CommonCfg.Ssid would copy SSID from MlmeAux. To prevent SSID is zero or wrong in Beacon, need to recover MlmeAux.SSID here. */ if (ADHOC_ON(pAd)) { NdisZeroMemory(pAd->MlmeAux.Ssid, MAX_LEN_OF_SSID); pAd->MlmeAux.SsidLen = pAd->CommonCfg.SsidLen; NdisMoveMemory(pAd->MlmeAux.Ssid, pAd->CommonCfg.Ssid, pAd->CommonCfg.SsidLen); } /* To prevent data lost. Send an NULL data with turned PSM bit on to current associated AP before SCAN progress. Now, we need to send an NULL data with turned PSM bit off to AP, when scan progress done */ if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED) && (INFRA_ON(pAd))) { RTMPSendNullFrame(pAd, pAd->CommonCfg.TxRate, (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED) ? TRUE:FALSE), pAd->CommonCfg.bAPSDForcePowerSave ? PWR_SAVE : pAd->StaCfg.Psm); DBGPRINT(RT_DEBUG_TRACE, ("%s -- Send null frame\n", __FUNCTION__)); } #ifdef RT_CFG80211_SUPPORT if (pAd->ApCfg.ApCliTab[MAIN_MBSSID].Valid && RTMP_CFG80211_VIF_P2P_CLI_ON(pAd)) { DBGPRINT(RT_DEBUG_TRACE, ("CFG80211_NULL: PWR_ACTIVE SCAN_END\n")); RT_CFG80211_P2P_CLI_SEND_NULL_FRAME(pAd, PWR_ACTIVE); } #endif /* RT_CFG80211_SUPPORT */ /* keep the latest scan channel, could be 0 for scan complete, or other channel*/ pAd->StaCfg.LastScanChannel = pAd->MlmeAux.Channel; pAd->StaCfg.ScanChannelCnt = 0; /* Suspend scanning and Resume TxData for Fast Scanning*/ if ((pAd->MlmeAux.Channel != 0) && (pAd->StaCfg.bImprovedScan)) /* it is scan pending*/ { pAd->Mlme.SyncMachine.CurrState = SCAN_PENDING; Status = MLME_SUCCESS; DBGPRINT(RT_DEBUG_WARN, ("bFastRoamingScan ~~~ Get back to send data ~~~\n")); RTMPResumeMsduTransmission(pAd); } else { pAd->StaCfg.BssNr = pAd->ScanTab.BssNr; pAd->StaCfg.bImprovedScan = FALSE; pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE; Status = MLME_SUCCESS; MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_SCAN_CONF, 2, &Status, 0); RTMP_MLME_HANDLER(pAd); } } #endif /* CONFIG_STA_SUPPORT */ #ifdef CONFIG_AP_SUPPORT if (OpMode == OPMODE_AP) { #ifdef P2P_APCLI_SUPPORT /* P2P CLIENT in WSC Scan or Re-Connect scanning. */ if (P2P_CLI_ON(pAd) && (ApScanRunning(pAd) == TRUE)) { /*MlmeEnqueue(pAd, APCLI_CTRL_STATE_MACHINE, APCLI_CTRL_JOIN_REQ_TIMEOUT, 0, NULL, 0);*/ DBGPRINT(RT_DEBUG_INFO, ("%s:: Scan Done! reset APCLI CTRL State Machine!\n", __FUNCTION__)); pAd->ApCfg.ApCliTab[0].CtrlCurrState = APCLI_CTRL_DISCONNECTED; } #endif /* P2P_APCLI_SUPPORT */ pAd->Mlme.ApSyncMachine.CurrState = AP_SYNC_IDLE; RTMPResumeMsduTransmission(pAd); /* iwpriv set auto channel selection*/ /* scanned all channels*/ if (pAd->ApCfg.bAutoChannelAtBootup==TRUE) { pAd->CommonCfg.Channel = SelectBestChannel(pAd, pAd->ApCfg.AutoChannelAlg); pAd->ApCfg.bAutoChannelAtBootup = FALSE; #ifdef DOT11_N_SUPPORT N_ChannelCheck(pAd); #endif /* DOT11_N_SUPPORT */ APStop(pAd); APStartUp(pAd); } if (!((pAd->CommonCfg.Channel > 14) && (pAd->CommonCfg.bIEEE80211H == TRUE))) AsicEnableBssSync(pAd); } #endif /* CONFIG_AP_SUPPORT */ return TRUE; }
static INT scan_ch_restore(RTMP_ADAPTER *pAd, UCHAR OpMode) { INT bw, ch; if (pAd->CommonCfg.BBPCurrentBW != pAd->hw_cfg.bbp_bw) bbp_set_bw(pAd, pAd->hw_cfg.bbp_bw); #ifdef DOT11_VHT_AC if (pAd->hw_cfg.bbp_bw == BW_80) ch = pAd->CommonCfg.vht_cent_ch; else #endif /* DOT11_VHT_AC */ if (pAd->hw_cfg.bbp_bw == BW_40) ch = pAd->CommonCfg.CentralChannel; else ch = pAd->CommonCfg.Channel; ASSERT((ch != 0)); AsicSwitchChannel(pAd, ch, FALSE); AsicLockChannel(pAd, ch); switch(pAd->CommonCfg.BBPCurrentBW) { case BW_80: bw = 80; break; case BW_40: bw = 40; break; case BW_10: bw = 10; break; case BW_20: default: bw =20; break; } DBGPRINT(RT_DEBUG_TRACE, ("SYNC - End of SCAN, restore to %dMHz channel %d, Total BSS[%02d]\n", bw, ch, pAd->ScanTab.BssNr)); #ifdef CONFIG_AP_SUPPORT if (OpMode == OPMODE_AP) { #ifdef APCLI_SUPPORT #ifdef APCLI_AUTO_CONNECT_SUPPORT if (pAd->ApCfg.ApCliAutoConnectRunning == TRUE) { if (!ApCliAutoConnectExec(pAd)) { DBGPRINT(RT_DEBUG_ERROR, ("Error in %s\n", __FUNCTION__)); } } #endif /* APCLI_AUTO_CONNECT_SUPPORT */ #endif /* APCLI_SUPPORT */ pAd->Mlme.ApSyncMachine.CurrState = AP_SYNC_IDLE; RTMPResumeMsduTransmission(pAd); /* iwpriv set auto channel selection*/ /* scanned all channels*/ if (pAd->ApCfg.bAutoChannelAtBootup==TRUE) { pAd->CommonCfg.Channel = SelectBestChannel(pAd, pAd->ApCfg.AutoChannelAlg); pAd->ApCfg.bAutoChannelAtBootup = FALSE; #ifdef DOT11_N_SUPPORT N_ChannelCheck(pAd); #endif /* DOT11_N_SUPPORT */ APStop(pAd); APStartUp(pAd); } if (!((pAd->CommonCfg.Channel > 14) && (pAd->CommonCfg.bIEEE80211H == TRUE) && (pAd->Dot11_H.RDMode != RD_NORMAL_MODE))) AsicEnableBssSync(pAd, pAd->CommonCfg.BeaconPeriod); } #endif /* CONFIG_AP_SUPPORT */ return TRUE; }
/* ========================================================================== Description: Scan next channel ========================================================================== */ VOID ScanNextChannel( IN PRTMP_ADAPTER pAd) { HEADER_802_11 Hdr80211; PUCHAR pOutBuffer = NULL; NDIS_STATUS NStatus; ULONG FrameLen = 0; UCHAR SsidLen = 0, ScanType = pAd->MlmeAux.ScanType, BBPValue = 0; UINT ScanTimeIn5gChannel = SHORT_CHANNEL_TIME; BOOLEAN ScanPending = FALSE; #ifdef RALINK_ATE // Nothing to do in ATE mode. if (ATE_ON(pAd)) return; #endif // RALINK_ATE // if ((pAd->MlmeAux.Channel == 0) || ScanPending) { if ((pAd->CommonCfg.BBPCurrentBW == BW_40) ) { AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE); AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel); RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue); BBPValue &= (~0x18); BBPValue |= 0x10; RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue); DBGPRINT(RT_DEBUG_TRACE, ("SYNC - End of SCAN, restore to 40MHz channel %d, Total BSS[%02d]\n",pAd->CommonCfg.CentralChannel, pAd->ScanTab.BssNr)); } else { AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE); AsicLockChannel(pAd, pAd->CommonCfg.Channel); DBGPRINT(RT_DEBUG_TRACE, ("SYNC - End of SCAN, restore to channel %d, Total BSS[%02d]\n",pAd->CommonCfg.Channel, pAd->ScanTab.BssNr)); } #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) { pAd->Mlme.ApSyncMachine.CurrState = AP_SYNC_IDLE; RTMPResumeMsduTransmission(pAd); // iwpriv set auto channel selection // scanned all channels if (pAd->ApCfg.bAutoChannelAtBootup==TRUE) { pAd->CommonCfg.Channel = SelectBestChannel(pAd, pAd->ApCfg.AutoChannelAlg); pAd->ApCfg.bAutoChannelAtBootup = FALSE; #ifdef DOT11_N_SUPPORT N_ChannelCheck(pAd); #endif // DOT11_N_SUPPORT // APStop(pAd); APStartUp(pAd); } if (!((pAd->CommonCfg.Channel > 14) && (pAd->CommonCfg.bIEEE80211H == TRUE))) { AsicEnableBssSync(pAd); } } #endif // CONFIG_AP_SUPPORT // } else {
RTMP_BUILD_DRV_OPS_FUNCTION_BODY #endif /* OS_ABL_FUNC_SUPPORT */ #endif /* LINUX */ int rt28xx_init( IN VOID *pAdSrc, IN PSTRING pDefaultMac, IN PSTRING pHostName) { PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdSrc; UINT index; UCHAR TmpPhy; NDIS_STATUS Status; if (pAd == NULL) return FALSE; #ifdef CONFIG_STA_SUPPORT #ifdef PCIE_PS_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { /* If dirver doesn't wake up firmware here,*/ /* NICLoadFirmware will hang forever when interface is up again.*/ if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE) && OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) { AUTO_WAKEUP_STRUC AutoWakeupCfg; AsicForceWakeup(pAd, TRUE); AutoWakeupCfg.word = 0; RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word); OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE); } } #endif /* PCIE_PS_SUPPORT */ #endif /* CONFIG_STA_SUPPORT */ /* reset Adapter flags*/ RTMP_CLEAR_FLAGS(pAd); /* Init BssTab & ChannelInfo tabbles for auto channel select.*/ #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) { /*#ifdef AUTO_CH_SELECT_ENHANCE*/ AutoChBssTableInit(pAd); ChannelInfoInit(pAd); /*#endif AUTO_CH_SELECT_ENHANCE */ } #endif /* CONFIG_AP_SUPPORT */ #ifdef DOT11_N_SUPPORT /* Allocate BA Reordering memory*/ if (ba_reordering_resource_init(pAd, MAX_REORDERING_MPDU_NUM) != TRUE) goto err1; #endif /* DOT11_N_SUPPORT */ /* Make sure MAC gets ready.*/ index = 0; if (WaitForAsicReady(pAd) != TRUE) goto err1; DBGPRINT(RT_DEBUG_TRACE, ("MAC[Ver:Rev=0x%08x]\n", pAd->MACVersion)); if (MAX_LEN_OF_MAC_TABLE > MAX_AVAILABLE_CLIENT_WCID(pAd)) { DBGPRINT(RT_DEBUG_ERROR, ("MAX_LEN_OF_MAC_TABLE can not be larger than MAX_AVAILABLE_CLIENT_WCID!!!!\n")); goto err1; } #ifdef RTMP_MAC_PCI /* To fix driver disable/enable hang issue when radio off*/ RTMP_IO_WRITE32(pAd, PWR_PIN_CFG, 0x2); #endif /* RTMP_MAC_PCI */ /* Disable DMA*/ RT28XXDMADisable(pAd); /* Load 8051 firmware*/ Status = NICLoadFirmware(pAd); if (Status != NDIS_STATUS_SUCCESS) { DBGPRINT_ERR(("NICLoadFirmware failed, Status[=0x%08x]\n", Status)); goto err1; } NICLoadRateSwitchingParams(pAd); /* Disable interrupts here which is as soon as possible*/ /* This statement should never be true. We might consider to remove it later*/ #ifdef RTMP_MAC_PCI if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_ACTIVE)) { RTMP_ASIC_INTERRUPT_DISABLE(pAd); } #endif /* RTMP_MAC_PCI */ #ifdef RESOURCE_PRE_ALLOC Status = RTMPInitTxRxRingMemory(pAd); #else Status = RTMPAllocTxRxRingMemory(pAd); #endif /* RESOURCE_PRE_ALLOC */ if (Status != NDIS_STATUS_SUCCESS) { DBGPRINT_ERR(("RTMPAllocTxRxMemory failed, Status[=0x%08x]\n", Status)); goto err2; } RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE); /* initialize MLME*/ #ifdef RT6352 pAd->bCalibrationDone = FALSE; #endif /* RT6352 */ Status = RtmpMgmtTaskInit(pAd); if (Status != NDIS_STATUS_SUCCESS) goto err3; Status = MlmeInit(pAd); if (Status != NDIS_STATUS_SUCCESS) { DBGPRINT_ERR(("MlmeInit failed, Status[=0x%08x]\n", Status)); goto err4; } #ifdef RMTP_RBUS_SUPPORT #ifdef VIDEO_TURBINE_SUPPORT VideoConfigInit(pAd); #endif /* VIDEO_TURBINE_SUPPORT */ #endif /* RMTP_RBUS_SUPPORT */ /* Initialize pAd->StaCfg, pAd->ApCfg, pAd->CommonCfg to manufacture default*/ UserCfgInit(pAd); Status = RtmpNetTaskInit(pAd); if (Status != NDIS_STATUS_SUCCESS) goto err5; /* COPY_MAC_ADDR(pAd->ApCfg.MBSSID[apidx].Bssid, netif->hwaddr);*/ /* pAd->bForcePrintTX = TRUE;*/ CfgInitHook(pAd); #ifdef CONFIG_AP_SUPPORT if ((pAd->OpMode == OPMODE_AP) #ifdef P2P_SUPPORT || TRUE #endif /* P2P_SUPPORT */ ) APInitialize(pAd); #endif /* CONFIG_AP_SUPPORT */ #ifdef BLOCK_NET_IF initblockQueueTab(pAd); #endif /* BLOCK_NET_IF */ Status = MeasureReqTabInit(pAd); if (Status != NDIS_STATUS_SUCCESS) { DBGPRINT_ERR(("MeasureReqTabInit failed, Status[=0x%08x]\n",Status)); goto err6; } Status = TpcReqTabInit(pAd); if (Status != NDIS_STATUS_SUCCESS) { DBGPRINT_ERR(("TpcReqTabInit failed, Status[=0x%08x]\n",Status)); goto err6; } /* Init the hardware, we need to init asic before read registry, otherwise mac register will be reset*/ Status = NICInitializeAdapter(pAd, TRUE); if (Status != NDIS_STATUS_SUCCESS) { DBGPRINT_ERR(("NICInitializeAdapter failed, Status[=0x%08x]\n", Status)); if (Status != NDIS_STATUS_SUCCESS) goto err6; } #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) { } #endif /* CONFIG_AP_SUPPORT */ /* Read parameters from Config File */ /* unknown, it will be updated in NICReadEEPROMParameters */ pAd->RfIcType = RFIC_UNKNOWN; Status = RTMPReadParametersHook(pAd); if(pAd->CommonCfg.Channel==0) { RTMPSetDefaultChannel(pAd); } #ifdef CONFIG_STA_SUPPORT #ifdef CREDENTIAL_STORE RecoverConnectInfo(pAd); #endif /* CREDENTIAL_STORE */ #endif /* CONFIG_STA_SUPPORT */ DBGPRINT(RT_DEBUG_OFF, ("1. Phy Mode = %d\n", pAd->CommonCfg.PhyMode)); if (Status != NDIS_STATUS_SUCCESS) { DBGPRINT_ERR(("RTMPReadParametersHook failed, Status[=0x%08x]\n",Status)); goto err6; } #ifdef DOT11_N_SUPPORT /*Init Ba Capability parameters.*/ /* RT28XX_BA_INIT(pAd);*/ pAd->CommonCfg.DesiredHtPhy.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity; pAd->CommonCfg.DesiredHtPhy.AmsduEnable = (USHORT)pAd->CommonCfg.BACapability.field.AmsduEnable; pAd->CommonCfg.DesiredHtPhy.AmsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize; pAd->CommonCfg.DesiredHtPhy.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode; /* UPdata to HT IE*/ pAd->CommonCfg.HtCapability.HtCapInfo.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode; pAd->CommonCfg.HtCapability.HtCapInfo.AMsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize; pAd->CommonCfg.HtCapability.HtCapParm.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity; #endif /* DOT11_N_SUPPORT */ /* after reading Registry, we now know if in AP mode or STA mode*/ /* Load 8051 firmware; crash when FW image not existent*/ /* Status = NICLoadFirmware(pAd);*/ /* if (Status != NDIS_STATUS_SUCCESS)*/ /* break;*/ DBGPRINT(RT_DEBUG_OFF, ("2. Phy Mode = %d\n", pAd->CommonCfg.PhyMode)); /* We should read EEPROM for all cases. rt2860b*/ NICReadEEPROMParameters(pAd, (PSTRING)pDefaultMac); #ifdef CONFIG_STA_SUPPORT #endif /* CONFIG_STA_SUPPORT */ DBGPRINT(RT_DEBUG_OFF, ("3. Phy Mode = %d\n", pAd->CommonCfg.PhyMode)); #ifdef LED_CONTROL_SUPPORT /* Send LED Setting to MCU */ RTMPInitLEDMode(pAd); #endif /* LED_CONTROL_SUPPORT */ NICInitAsicFromEEPROM(pAd); /* rt2860b */ #ifdef RT6352 if (IS_RT6352(pAd)) { RtmpKickOutHwNullFrame(pAd, TRUE, FALSE); #if defined(RT6352_EP_SUPPORT) || defined(RT6352_EL_SUPPORT) { ULONG SysRegValue; RTMP_SYS_IO_READ32(0xb0000060, &SysRegValue); if ((SysRegValue & 0x100000) == 0x0) { SysRegValue |= 0x100000; RTMP_SYS_IO_WRITE32(0xb0000060, SysRegValue); DBGPRINT(RT_DEBUG_ERROR,("Change as GPIO Mode(0x%x)\n", SysRegValue)); } } #endif /* defined(RT6352_EP_SUPPORT) || defined(RT6352_EL_SUPPORT) */ /* Do R-Calibration */ R_Calibration(pAd); #ifdef RTMP_TEMPERATURE_CALIBRATION /* Temperature Init */ RT6352_Temperature_Init(pAd); RT6352_TemperatureCalibration(pAd); #endif /* RTMP_TEMPERATURE_CALIBRATION */ #ifdef RTMP_TEMPERATURE_COMPENSATION /* read out tempature reference value (0x80 ~ 0x7F) TssiPlusBoundaryG [7] [6] [5] [4] [3] [2] [1] [0] (smaller) + TssiMinusBoundaryG[0] [1] [2] [3] [4] [5] [6] [7] (larger) */ RT6352_EEPROM_TSSI_24G_READ(pAd); /* pAd->TssiCalibratedOffset: reference temperature(e2p[D1h]) */ /* adjust the boundary table by pAd->TssiCalibratedOffset */ RT6352_TssiTableAdjust(pAd); /* ATE temperature(e2p[77h]) */ RT6352_TssiMpAdjust(pAd); DBGPRINT(RT_DEBUG_OFF,("E2PROM: G Tssi[-7 .. +7] = %d %d %d %d %d %d %d - %d - %d %d %d %d %d %d %d, offset=%d, tuning=%d\n", pAd->TssiMinusBoundaryG[7], pAd->TssiMinusBoundaryG[6], pAd->TssiMinusBoundaryG[5], pAd->TssiMinusBoundaryG[4], pAd->TssiMinusBoundaryG[3], pAd->TssiMinusBoundaryG[2], pAd->TssiMinusBoundaryG[1], pAd->TssiRefG, pAd->TssiPlusBoundaryG[1], pAd->TssiPlusBoundaryG[2], pAd->TssiPlusBoundaryG[3], pAd->TssiPlusBoundaryG[4], pAd->TssiPlusBoundaryG[5], pAd->TssiPlusBoundaryG[6], pAd->TssiPlusBoundaryG[7], pAd->TssiCalibratedOffset, pAd->bAutoTxAgcG)); #endif /* RTMP_TEMPERATURE_COMPENSATION */ AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, TRUE); AsicLockChannel(pAd, pAd->CommonCfg.Channel); /* RF Self TX DC Calibration */ RF_SELF_TXDC_CAL(pAd); /* Rx DCOC Calibration */ RxDCOC_Calibration(pAd); /* BandWidth Filter Calibration */ BW_Filter_Calibration(pAd,TRUE); BW_Filter_Calibration(pAd,FALSE); /* Do LOFT and IQ Calibration */ LOFT_IQ_Calibration(pAd); /* DPD_Calibration */ #ifdef RT6352_EP_SUPPORT if (pAd->bExtPA == FALSE) #endif /* RT6352_EP_SUPPORT */ { DoDPDCalibration(pAd); pAd->DoDPDCurrTemperature = 0x7FFFFFFF; } /* Rx DCOC Calibration */ RxDCOC_Calibration(pAd); /* Do RXIQ Calibration */ RXIQ_Calibration(pAd); #if defined(RT6352_EP_SUPPORT) || defined(RT6352_EL_SUPPORT) RT6352_Init_ExtPA_ExtLNA(pAd, FALSE); #endif /* defined(RT6352_EP_SUPPORT) || defined(RT6352_EL_SUPPORT) */ } #endif /* RT6352 */ #ifdef RALINK_ATE if (ATEInit(pAd) != NDIS_STATUS_SUCCESS) { DBGPRINT(RT_DEBUG_ERROR, ("%s(): ATE initialization failed !\n", __FUNCTION__)); goto err6; } #endif /* RALINK_ATE */ #ifdef RTMP_INTERNAL_TX_ALC /* Initialize the desired TSSI table*/ RTMP_CHIP_ASIC_TSSI_TABLE_INIT(pAd); #endif /* RTMP_INTERNAL_TX_ALC */ InitRfPaModeTable(pAd); #ifdef RTMP_TEMPERATURE_COMPENSATION /* Temperature compensation, initialize the lookup table */ DBGPRINT(RT_DEBUG_OFF, ("bAutoTxAgcG = %d\n", pAd->bAutoTxAgcG)); if (pAd->chipCap.bTempCompTxALC && pAd->bAutoTxAgcG) InitLookupTable(pAd); #endif /* RTMP_TEMPERATURE_COMPENSATION */ /* Set PHY to appropriate mode*/ TmpPhy = pAd->CommonCfg.PhyMode; pAd->CommonCfg.PhyMode = 0xff; RTMPSetPhyMode(pAd, TmpPhy); #ifdef DOT11_N_SUPPORT SetCommonHT(pAd); #endif /* DOT11_N_SUPPORT */ /* No valid channels.*/ if (pAd->ChannelListNum == 0) { DBGPRINT(RT_DEBUG_ERROR, ("Wrong configuration. No valid channel found. Check \"ContryCode\" and \"ChannelGeography\" setting.\n")); goto err6; } #ifdef DOT11_N_SUPPORT DBGPRINT(RT_DEBUG_OFF, ("MCS Set = %02x %02x %02x %02x %02x\n", pAd->CommonCfg.HtCapability.MCSSet[0], pAd->CommonCfg.HtCapability.MCSSet[1], pAd->CommonCfg.HtCapability.MCSSet[2], pAd->CommonCfg.HtCapability.MCSSet[3], pAd->CommonCfg.HtCapability.MCSSet[4])); #endif /* DOT11_N_SUPPORT */ #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) { #ifdef AP_QLOAD_SUPPORT /* init QBSS Element */ QBSS_LoadInit(pAd); #endif /* AP_QLOAD_SUPPORT */ } #endif /* CONFIG_AP_SUPPORT */ /* APInitialize(pAd);*/ #ifdef IKANOS_VX_1X0 VR_IKANOS_FP_Init(pAd->ApCfg.BssidNum, pAd->PermanentAddress); #endif /* IKANOS_VX_1X0 */ #ifdef RALINK_ATE #endif /* RALINK_ATE */ #ifdef CONFIG_AP_SUPPORT /* Initialize RF register to default value*/ if (pAd->OpMode == OPMODE_AP) { AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE); AsicLockChannel(pAd, pAd->CommonCfg.Channel); } #endif /* CONFIG_AP_SUPPORT */ #ifdef RTMP_INTERNAL_TX_ALC #ifdef RT6352 if (IS_RT6352(pAd) && (pAd->TxPowerCtrl.bInternalTxALC == TRUE)) { RT635xTssiDcCalibration(pAd); } #endif /* RT6352 */ #endif /* RTMP_INTERNAL_TX_ALC */ /* Some modules init must be called before APStartUp(). Or APStartUp() will make up beacon content and call other modules API to get some information to fill. */ if (pAd && (Status != NDIS_STATUS_SUCCESS)) { /* Undo everything if it failed*/ if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE)) { /* NdisMDeregisterInterrupt(&pAd->Interrupt);*/ RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE); } /* RTMPFreeAdapter(pAd); we will free it in disconnect()*/ } else if (pAd) { /* Microsoft HCT require driver send a disconnect event after driver initialization.*/ OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED); OPSTATUS_CLEAR_FLAG(pAd, fOP_AP_STATUS_MEDIA_STATE_CONNECTED); RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_MEDIA_STATE_CHANGE); DBGPRINT(RT_DEBUG_TRACE, ("NDIS_STATUS_MEDIA_DISCONNECT Event B!\n")); #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) { if (pAd->ApCfg.bAutoChannelAtBootup || (pAd->CommonCfg.Channel == 0)) { UINT8 BBPValue = 0; /* Enable Interrupt first due to we need to scan channel to receive beacons.*/ RTMP_IRQ_ENABLE(pAd); /* Now Enable RxTx*/ RTMPEnableRxTx(pAd); RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_START_UP); /* Let BBP register at 20MHz to do scan */ RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue); BBPValue &= (~0x18); RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue); DBGPRINT(RT_DEBUG_ERROR, ("SYNC - BBP R4 to 20MHz.l\n")); /* Now we can receive the beacon and do the listen beacon*/ /* use default BW to select channel*/ pAd->CommonCfg.Channel = AP_AUTO_CH_SEL(pAd, pAd->ApCfg.AutoChannelAlg); pAd->ApCfg.bAutoChannelAtBootup = FALSE; } #ifdef DOT11_N_SUPPORT /* If phymode > PHY_11ABGN_MIXED and BW=40 check extension channel, after select channel */ N_ChannelCheck(pAd); #ifdef DOT11N_DRAFT3 /* We only do this Overlapping BSS Scan when system up, for the other situation of channel changing, we depends on station's report to adjust ourself. */ if (pAd->CommonCfg.bForty_Mhz_Intolerant == TRUE) { DBGPRINT(RT_DEBUG_TRACE, ("Disable 20/40 BSSCoex Channel Scan(BssCoex=%d, 40MHzIntolerant=%d)\n", pAd->CommonCfg.bBssCoexEnable, pAd->CommonCfg.bForty_Mhz_Intolerant)); } else if(pAd->CommonCfg.bBssCoexEnable == TRUE) { DBGPRINT(RT_DEBUG_TRACE, ("Enable 20/40 BSSCoex Channel Scan(BssCoex=%d)\n", pAd->CommonCfg.bBssCoexEnable)); APOverlappingBSSScan(pAd); } RTMP_11N_D3_TimerInit(pAd); /* RTMPInitTimer(pAd, &pAd->CommonCfg.Bss2040CoexistTimer, GET_TIMER_FUNCTION(Bss2040CoexistTimeOut), pAd, FALSE);*/ #endif /* DOT11N_DRAFT3 */ #endif /* DOT11_N_SUPPORT */ APStartUp(pAd); DBGPRINT(RT_DEBUG_OFF, ("Main bssid = %02x:%02x:%02x:%02x:%02x:%02x\n", PRINT_MAC(pAd->ApCfg.MBSSID[BSS0].Bssid))); } #endif /* CONFIG_AP_SUPPORT */ #ifdef RT6352 pAd->bCalibrationDone = TRUE; if (IS_RT6352(pAd)) { #ifdef DYNAMIC_VGA_SUPPORT if (pAd->CommonCfg.MO_Cfg.bDyncVGAEnable) { RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R195, 0x83); RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R196, 0x70); RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R195, 0x86); RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R196, 0x70); } #endif /* DYNAMIC_VGA_SUPPORT */ } #endif /* RT6352 */ }/* end of else*/ /* Set up the Mac address*/ #ifdef CONFIG_AP_SUPPORT #ifndef P2P_APCLI_SUPPORT RtmpOSNetDevAddrSet(pAd->OpMode, pAd->net_dev, &pAd->CurrentAddress[0], NULL); #endif /* P2P_APCLI_SUPPORT */ #endif /* CONFIG_AP_SUPPORT */ #ifdef CONFIG_STA_SUPPORT RtmpOSNetDevAddrSet(pAd->OpMode, pAd->net_dev, &pAd->CurrentAddress[0], (PUCHAR)(pAd->StaCfg.dev_name)); #endif /* CONFIG_STA_SUPPORT */ /* Various AP function init*/ #ifdef CONFIG_AP_SUPPORT #ifdef P2P_SUPPORT #else IF_DEV_CONFIG_OPMODE_ON_AP(pAd) #endif /* P2P_SUPPORT */ { #ifdef MBSS_SUPPORT /* the function can not be moved to RT2860_probe() even register_netdev() is changed as register_netdevice(). Or in some PC, kernel will panic (Fedora 4) */ /* RT28xx_MBSS_Init(pAd, pAd->net_dev); os abl move to rt_main_dev.c*/ #endif /* MBSS_SUPPORT */ #ifdef WDS_SUPPORT /* RT28xx_WDS_Init(pAd, pAd->net_dev);*/ #endif /* WDS_SUPPORT */ #ifdef APCLI_SUPPORT /* RT28xx_ApCli_Init(pAd, pAd->net_dev);*/ #endif /* APCLI_SUPPORT */ } #endif /* CONFIG_AP_SUPPORT */ #ifdef UAPSD_SUPPORT UAPSD_Init(pAd); #endif /* UAPSD_SUPPORT */ /* assign function pointers*/ #ifdef MAT_SUPPORT /* init function pointers, used in OS_ABL */ RTMP_MATOpsInit(pAd); #endif /* MAT_SUPPORT */ #ifdef RTMP_RBUS_SUPPORT if (pAd->infType == RTMP_DEV_INF_RBUS) { #ifdef VIDEO_TURBINE_SUPPORT VideoTurbineDynamicTune(pAd); #endif /* VIDEO_TURBINE_SUPPORT */ #ifdef RT3XXX_ANTENNA_DIVERSITY_SUPPORT RT3XXX_AntDiversity_Init(pAd); #endif /* RT3XXX_ANTENNA_DIVERSITY_SUPPORT */ } #endif /* RTMP_RBUS_SUPPORT */ #ifdef P2P_SUPPORT /* RTMP_P2P_Init(pAd, pAd->net_dev); */ #endif /* P2P_SUPPORT */ #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) { #ifdef MAT_SUPPORT MATEngineInit(pAd); #endif /* MAT_SUPPORT */ #ifdef CLIENT_WDS CliWds_ProxyTabInit(pAd); #endif /* CLIENT_WDS */ } #endif /* CONFIG_AP_SUPPORT */ #ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { #ifdef DOT11Z_TDLS_SUPPORT TDLS_Table_Init(pAd); #endif /* DOT11Z_TDLS_SUPPORT */ #ifdef WPA_SUPPLICANT_SUPPORT #ifndef NATIVE_WPA_SUPPLICANT_SUPPORT /* send wireless event to wpa_supplicant for infroming interface up.*/ RtmpOSWrielessEventSend(pAd->net_dev, RT_WLAN_EVENT_CUSTOM, RT_INTERFACE_UP, NULL, NULL, 0); #endif /* NATIVE_WPA_SUPPLICANT_SUPPORT */ #endif /* WPA_SUPPLICANT_SUPPORT */ } #endif /* CONFIG_STA_SUPPORT */ /* auto-fall back settings */ RTMP_IO_WRITE32(pAd, HT_FBK_CFG1, 0xedcba980); /* Fallback MCS8->MCS0 */ #ifdef DOT11N_SS3_SUPPORT if (pAd->CommonCfg.TxStream >= 3) { RTMP_IO_WRITE32(pAd, TX_FBK_CFG_3S_0, 0x12111008); RTMP_IO_WRITE32(pAd, TX_FBK_CFG_3S_1, 0x16151413); } #endif /* DOT11N_SS3_SUPPORT */ #ifdef STREAM_MODE_SUPPORT RtmpStreamModeInit(pAd); #endif /* STREAM_MODE_SUPPORT */ #if defined(RT2883) || defined(RT3883) if (IS_RT2883(pAd) || IS_RT3883(pAd)) { UINT8 BBPValue = 0; BBP_IO_READ8_BY_REG_ID(pAd, BBP_R65, &BBPValue); if (pAd->CommonCfg.FineAGC) BBPValue |= 0x40; /* turn on fine AGC*/ else BBPValue &= ~0x40; /* turn off fine AGC*/ BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R65, BBPValue); } #endif /* defined(RT2883) || defined(RT3883) */ #ifdef DOT11_N_SUPPORT #ifdef TXBF_SUPPORT if (pAd->CommonCfg.ITxBfTimeout) { RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R179, 0x02); RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R180, 0); RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R182, pAd->CommonCfg.ITxBfTimeout & 0xFF); RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R180, 1); RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R182, (pAd->CommonCfg.ITxBfTimeout>>8) & 0xFF); }
int rt28xx_init( IN PRTMP_ADAPTER pAd, IN PSTRING pDefaultMac, IN PSTRING pHostName) { UINT index; UCHAR TmpPhy; NDIS_STATUS Status; UINT32 MacCsr0 = 0; #ifdef CONFIG_STA_SUPPORT #ifdef PCIE_PS_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { // If dirver doesn't wake up firmware here, // NICLoadFirmware will hang forever when interface is up again. if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE) && OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) { AUTO_WAKEUP_STRUC AutoWakeupCfg; AsicForceWakeup(pAd, TRUE); AutoWakeupCfg.word = 0; RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word); OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE); } } #endif // PCIE_PS_SUPPORT // #endif // CONFIG_STA_SUPPORT // // reset Adapter flags RTMP_CLEAR_FLAGS(pAd); // Init BssTab & ChannelInfo tabbles for auto channel select. #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) { AutoChBssTableInit(pAd); ChannelInfoInit(pAd); } #endif // CONFIG_AP_SUPPORT // #ifdef DOT11_N_SUPPORT // Allocate BA Reordering memory if (ba_reordering_resource_init(pAd, MAX_REORDERING_MPDU_NUM) != TRUE) goto err1; #endif // DOT11_N_SUPPORT // // Make sure MAC gets ready. index = 0; do { RTMP_IO_READ32(pAd, MAC_CSR0, &MacCsr0); pAd->MACVersion = MacCsr0; if ((pAd->MACVersion != 0x00) && (pAd->MACVersion != 0xFFFFFFFF)) break; if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)) goto err1; RTMPusecDelay(10); } while (index++ < 100); DBGPRINT(RT_DEBUG_TRACE, ("MAC_CSR0 [ Ver:Rev=0x%08x]\n", pAd->MACVersion)); #ifdef RTMP_MAC_PCI // To fix driver disable/enable hang issue when radio off RTMP_IO_WRITE32(pAd, PWR_PIN_CFG, 0x2); #endif // RTMP_MAC_PCI // // Disable DMA RT28XXDMADisable(pAd); // Load 8051 firmware Status = NICLoadFirmware(pAd); if (Status != NDIS_STATUS_SUCCESS) { DBGPRINT_ERR(("NICLoadFirmware failed, Status[=0x%08x]\n", Status)); goto err1; } NICLoadRateSwitchingParams(pAd); // Disable interrupts here which is as soon as possible // This statement should never be true. We might consider to remove it later #ifdef RTMP_MAC_PCI if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_ACTIVE)) { RTMP_ASIC_INTERRUPT_DISABLE(pAd); } #endif // RTMP_MAC_PCI // #ifdef RESOURCE_PRE_ALLOC Status = RTMPInitTxRxRingMemory(pAd); #else Status = RTMPAllocTxRxRingMemory(pAd); #endif // RESOURCE_PRE_ALLOC // if (Status != NDIS_STATUS_SUCCESS) { DBGPRINT_ERR(("RTMPAllocTxRxMemory failed, Status[=0x%08x]\n", Status)); goto err2; } RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE); // initialize MLME // Status = RtmpMgmtTaskInit(pAd); if (Status != NDIS_STATUS_SUCCESS) goto err3; Status = MlmeInit(pAd); if (Status != NDIS_STATUS_SUCCESS) { DBGPRINT_ERR(("MlmeInit failed, Status[=0x%08x]\n", Status)); goto err4; } #ifdef RMTP_RBUS_SUPPORT #ifdef VIDEO_TURBINE_SUPPORT VideoConfigInit(pAd); #endif // VIDEO_TURBINE_SUPPORT // #endif // RMTP_RBUS_SUPPORT // // Initialize pAd->StaCfg, pAd->ApCfg, pAd->CommonCfg to manufacture default // UserCfgInit(pAd); Status = RtmpNetTaskInit(pAd); if (Status != NDIS_STATUS_SUCCESS) goto err5; // COPY_MAC_ADDR(pAd->ApCfg.MBSSID[apidx].Bssid, netif->hwaddr); // pAd->bForcePrintTX = TRUE; CfgInitHook(pAd); #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) APInitialize(pAd); #endif // CONFIG_AP_SUPPORT // #ifdef BLOCK_NET_IF initblockQueueTab(pAd); #endif // BLOCK_NET_IF // Status = MeasureReqTabInit(pAd); if (Status != NDIS_STATUS_SUCCESS) { DBGPRINT_ERR(("MeasureReqTabInit failed, Status[=0x%08x]\n",Status)); goto err6; } Status = TpcReqTabInit(pAd); if (Status != NDIS_STATUS_SUCCESS) { DBGPRINT_ERR(("TpcReqTabInit failed, Status[=0x%08x]\n",Status)); goto err6; } // // Init the hardware, we need to init asic before read registry, otherwise mac register will be reset // Status = NICInitializeAdapter(pAd, TRUE); if (Status != NDIS_STATUS_SUCCESS) { DBGPRINT_ERR(("NICInitializeAdapter failed, Status[=0x%08x]\n", Status)); if (Status != NDIS_STATUS_SUCCESS) goto err6; } // Read parameters from Config File Status = RTMPReadParametersHook(pAd); DBGPRINT(RT_DEBUG_OFF, ("1. Phy Mode = %d\n", pAd->CommonCfg.PhyMode)); if (Status != NDIS_STATUS_SUCCESS) { DBGPRINT_ERR(("RTMPReadParametersHook failed, Status[=0x%08x]\n",Status)); goto err6; } #ifdef DOT11_N_SUPPORT //Init Ba Capability parameters. // RT28XX_BA_INIT(pAd); pAd->CommonCfg.DesiredHtPhy.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity; pAd->CommonCfg.DesiredHtPhy.AmsduEnable = (USHORT)pAd->CommonCfg.BACapability.field.AmsduEnable; pAd->CommonCfg.DesiredHtPhy.AmsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize; pAd->CommonCfg.DesiredHtPhy.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode; // UPdata to HT IE pAd->CommonCfg.HtCapability.HtCapInfo.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode; pAd->CommonCfg.HtCapability.HtCapInfo.AMsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize; pAd->CommonCfg.HtCapability.HtCapParm.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity; #endif // DOT11_N_SUPPORT // // after reading Registry, we now know if in AP mode or STA mode // Load 8051 firmware; crash when FW image not existent // Status = NICLoadFirmware(pAd); // if (Status != NDIS_STATUS_SUCCESS) // break; DBGPRINT(RT_DEBUG_OFF, ("2. Phy Mode = %d\n", pAd->CommonCfg.PhyMode)); // We should read EEPROM for all cases. rt2860b NICReadEEPROMParameters(pAd, (PUCHAR)pDefaultMac); #ifdef CONFIG_STA_SUPPORT #endif // CONFIG_STA_SUPPORT // DBGPRINT(RT_DEBUG_OFF, ("3. Phy Mode = %d\n", pAd->CommonCfg.PhyMode)); NICInitAsicFromEEPROM(pAd); //rt2860b #ifdef RTMP_INTERNAL_TX_ALC // // Initialize the desired TSSI table // InitDesiredTSSITable(pAd); #endif // RTMP_INTERNAL_TX_ALC // // Set PHY to appropriate mode TmpPhy = pAd->CommonCfg.PhyMode; pAd->CommonCfg.PhyMode = 0xff; RTMPSetPhyMode(pAd, TmpPhy); #ifdef DOT11_N_SUPPORT SetCommonHT(pAd); #endif // DOT11_N_SUPPORT // // No valid channels. if (pAd->ChannelListNum == 0) { DBGPRINT(RT_DEBUG_ERROR, ("Wrong configuration. No valid channel found. Check \"ContryCode\" and \"ChannelGeography\" setting.\n")); goto err6; } #ifdef DOT11_N_SUPPORT DBGPRINT(RT_DEBUG_OFF, ("MCS Set = %02x %02x %02x %02x %02x\n", pAd->CommonCfg.HtCapability.MCSSet[0], pAd->CommonCfg.HtCapability.MCSSet[1], pAd->CommonCfg.HtCapability.MCSSet[2], pAd->CommonCfg.HtCapability.MCSSet[3], pAd->CommonCfg.HtCapability.MCSSet[4])); #endif // DOT11_N_SUPPORT // #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) { #ifdef AP_QLOAD_SUPPORT /* init QBSS Element */ QBSS_LoadInit(pAd); #endif // AP_QLOAD_SUPPORT // } #endif // CONFIG_AP_SUPPORT // // APInitialize(pAd); #ifdef IKANOS_VX_1X0 VR_IKANOS_FP_Init(pAd->ApCfg.BssidNum, pAd->PermanentAddress); #endif // IKANOS_VX_1X0 // // // Initialize RF register to default value // AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE); AsicLockChannel(pAd, pAd->CommonCfg.Channel); /* Some modules init must be called before APStartUp(). Or APStartUp() will make up beacon content and call other modules API to get some information to fill. */ #ifdef WMM_ACM_SUPPORT #ifdef CONFIG_AP_SUPPORT ACMP_Init(pAd, pAd->CommonCfg.APEdcaParm.bACM[0], pAd->CommonCfg.APEdcaParm.bACM[1], pAd->CommonCfg.APEdcaParm.bACM[2], pAd->CommonCfg.APEdcaParm.bACM[3], 0); #endif // CONFIG_AP_SUPPORT // #ifdef CONFIG_STA_SUPPORT ACMP_Init(pAd); #endif // CONFIG_STA_SUPPORT // #endif // WMM_ACM_SUPPORT // if (pAd && (Status != NDIS_STATUS_SUCCESS)) { // // Undo everything if it failed // if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE)) { // NdisMDeregisterInterrupt(&pAd->Interrupt); RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE); } // RTMPFreeAdapter(pAd); // we will free it in disconnect() } else if (pAd) { // Microsoft HCT require driver send a disconnect event after driver initialization. OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED); // pAd->IndicateMediaState = NdisMediaStateDisconnected; RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_MEDIA_STATE_CHANGE); DBGPRINT(RT_DEBUG_TRACE, ("NDIS_STATUS_MEDIA_DISCONNECT Event B!\n")); #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) { if (pAd->ApCfg.bAutoChannelAtBootup || (pAd->CommonCfg.Channel == 0)) { UINT8 BBPValue = 0; // Enable Interrupt first due to we need to scan channel to receive beacons. RTMP_IRQ_ENABLE(pAd); // Now Enable RxTx RTMPEnableRxTx(pAd); RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_START_UP); // Let BBP register at 20MHz to do scan RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue); BBPValue &= (~0x18); RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue); DBGPRINT(RT_DEBUG_ERROR, ("SYNC - BBP R4 to 20MHz.l\n")); // Now we can receive the beacon and do the listen beacon // use default BW to select channel pAd->CommonCfg.Channel = AP_AUTO_CH_SEL(pAd, pAd->ApCfg.AutoChannelAlg); pAd->ApCfg.bAutoChannelAtBootup = FALSE; } #ifdef DOT11_N_SUPPORT // If phymode > PHY_11ABGN_MIXED and BW=40 check extension channel, after select channel N_ChannelCheck(pAd); #ifdef DOT11N_DRAFT3 /* We only do this Overlapping BSS Scan when system up, for the other situation of channel changing, we depends on station's report to adjust ourself. */ if (pAd->CommonCfg.bForty_Mhz_Intolerant == TRUE) { DBGPRINT(RT_DEBUG_TRACE, ("Disable 20/40 BSSCoex Channel Scan(BssCoex=%d, 40MHzIntolerant=%d)\n", pAd->CommonCfg.bBssCoexEnable, pAd->CommonCfg.bForty_Mhz_Intolerant)); } else if(pAd->CommonCfg.bBssCoexEnable == TRUE) { DBGPRINT(RT_DEBUG_TRACE, ("Enable 20/40 BSSCoex Channel Scan(BssCoex=%d)\n", pAd->CommonCfg.bBssCoexEnable)); APOverlappingBSSScan(pAd); } RTMP_11N_D3_TimerInit(pAd); // RTMPInitTimer(pAd, &pAd->CommonCfg.Bss2040CoexistTimer, GET_TIMER_FUNCTION(Bss2040CoexistTimeOut), pAd, FALSE); #endif // DOT11N_DRAFT3 // #endif // DOT11_N_SUPPORT // #ifdef RELASE_EXCLUDE /* 3090, 3090A and 3390 all support hadware tone radar function. But the soluation of those are different. 3090 is the old one. */ #endif // RELASE_EXCLUDE // APStartUp(pAd); DBGPRINT(RT_DEBUG_OFF, ("Main bssid = %02x:%02x:%02x:%02x:%02x:%02x\n", PRINT_MAC(pAd->ApCfg.MBSSID[BSS0].Bssid))); } #endif // CONFIG_AP_SUPPORT // }// end of else #ifdef WSC_INCLUDED #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) { INT apidx; #ifdef HOSTAPD_SUPPORT if (pAd->ApCfg.Hostapd == TRUE) { DBGPRINT(RT_DEBUG_TRACE, ("WPS is control by hostapd now.\n")); } else #endif //HOSTAPD_SUPPORT// for (apidx = 0; apidx < pAd->ApCfg.BssidNum; apidx++) { PWSC_CTRL pWscControl; UCHAR zeros16[16]= {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0}; pWscControl = &pAd->ApCfg.MBSSID[apidx].WscControl; DBGPRINT(RT_DEBUG_TRACE, ("Generate UUID for apidx(%d)\n", apidx)); if (NdisEqualMemory(&pWscControl->Wsc_Uuid_E[0], zeros16, UUID_LEN_HEX)) WscGenerateUUID(pAd, &pWscControl->Wsc_Uuid_E[0], &pWscControl->Wsc_Uuid_Str[0], apidx, FALSE); WscInit(pAd, FALSE, apidx); if (pWscControl->WscEnrolleePinCode == 0) { pWscControl->WscEnrolleePinCode = GenerateWpsPinCode(pAd, FALSE, apidx); pWscControl->WscEnrolleePinCodeLen = 8; } } } #endif // CONFIG_AP_SUPPORT // #ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { PWSC_CTRL pWscControl = &pAd->StaCfg.WscControl; WscGenerateUUID(pAd, &pWscControl->Wsc_Uuid_E[0], &pWscControl->Wsc_Uuid_Str[0], 0, FALSE); WscInit(pAd, BSS0); if (pWscControl->WscEnrolleePinCode == 0) { pWscControl->WscEnrolleePinCode = GenerateWpsPinCode(pAd, BSS0); pWscControl->WscEnrolleePinCodeLen = 8; } } #endif // CONFIG_STA_SUPPORT // /* WSC hardware push button function 0811 */ WSC_HDR_BTN_Init(pAd); #endif // WSC_INCLUDED // // Set up the Mac address RtmpOSNetDevAddrSet(pAd->net_dev, &pAd->CurrentAddress[0]); // Various AP function init #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) { #ifdef MBSS_SUPPORT /* the function can not be moved to RT2860_probe() even register_netdev() is changed as register_netdevice(). Or in some PC, kernel will panic (Fedora 4) */ RT28xx_MBSS_Init(pAd, pAd->net_dev); #endif // MBSS_SUPPORT // #ifdef WDS_SUPPORT RT28xx_WDS_Init(pAd, pAd->net_dev); #endif // WDS_SUPPORT // #ifdef APCLI_SUPPORT RT28xx_ApCli_Init(pAd, pAd->net_dev); #endif // APCLI_SUPPORT // } #endif // CONFIG_AP_SUPPORT // #ifdef RTMP_RBUS_SUPPORT #ifdef VIDEO_TURBINE_SUPPORT VideoTurbineDynamicTune(pAd); #endif // VIDEO_TURBINE_SUPPORT // #endif // RTMP_RBUS_SUPPORT // #ifdef RTMP_RBUS_SUPPORT #ifdef RT3XXX_ANTENNA_DIVERSITY_SUPPORT RT3XXX_AntDiversity_Init(pAd); #endif // RT3XXX_ANTENNA_DIVERSITY_SUPPORT // #endif // RTMP_RBUS_SUPPORT // #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) { #ifdef MAT_SUPPORT MATEngineInit(pAd); #endif // MAT_SUPPORT // #ifdef CLIENT_WDS CliWds_ProxyTabInit(pAd); #endif // CLIENT_WDS // } #endif // CONFIG_AP_SUPPORT // #ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { #ifdef DOT11Z_TDLS_SUPPORT TDLS_Table_Init(pAd); #endif // DOT11Z_TDLS_SUPPORT // #ifdef WPA_SUPPLICANT_SUPPORT #ifndef NATIVE_WPA_SUPPLICANT_SUPPORT // send wireless event to wpa_supplicant for infroming interface up. RtmpOSWrielessEventSend(pAd, IWEVCUSTOM, RT_INTERFACE_UP, NULL, NULL, 0); #endif // NATIVE_WPA_SUPPLICANT_SUPPORT // #endif // WPA_SUPPLICANT_SUPPORT // } #endif // CONFIG_STA_SUPPORT // #if defined(RT2883) || defined(RT3883) #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) { if (IS_RT2883(pAd) || IS_RT3883(pAd)) { #ifdef RANGE_EXT_SUPPORT RTMP_IO_WRITE32(pAd, HT_FBK_CFG1, 0xedcba980); #endif // RANGE_EXT_SUPPORT // RTMP_IO_WRITE32(pAd, TX_FBK_CFG_3S_0, 0x12111008); RTMP_IO_WRITE32(pAd, TX_FBK_CFG_3S_1, 0x16151413); } #ifdef STREAM_MODE_SUPPORT if (pAd->CommonCfg.StreamMode > 0) { ULONG streamWord = StreamModeRegVal(pAd); RTMP_IO_WRITE32(pAd, TX_CHAIN_ADDR0_L, (ULONG)(pAd->CommonCfg.StreamModeMac[0][0]) | (ULONG)(pAd->CommonCfg.StreamModeMac[0][1] << 8) | (ULONG)(pAd->CommonCfg.StreamModeMac[0][2] << 16) | (ULONG)(pAd->CommonCfg.StreamModeMac[0][3] << 24)); RTMP_IO_WRITE32(pAd, TX_CHAIN_ADDR0_H, streamWord | (ULONG)(pAd->CommonCfg.StreamModeMac[0][4]) | (ULONG)(pAd->CommonCfg.StreamModeMac[0][5] << 8)); RTMP_IO_WRITE32(pAd, TX_CHAIN_ADDR1_L, (ULONG)(pAd->CommonCfg.StreamModeMac[1][0]) | (ULONG)(pAd->CommonCfg.StreamModeMac[1][1] << 8) | (ULONG)(pAd->CommonCfg.StreamModeMac[1][2] << 16) | (ULONG)(pAd->CommonCfg.StreamModeMac[1][3] << 24)); RTMP_IO_WRITE32(pAd, TX_CHAIN_ADDR1_H, streamWord | (ULONG)(pAd->CommonCfg.StreamModeMac[1][4]) | (ULONG)(pAd->CommonCfg.StreamModeMac[1][5] << 8)); RTMP_IO_WRITE32(pAd, TX_CHAIN_ADDR2_L, (ULONG)(pAd->CommonCfg.StreamModeMac[2][0]) | (ULONG)(pAd->CommonCfg.StreamModeMac[2][1] << 8) | (ULONG)(pAd->CommonCfg.StreamModeMac[2][2] << 16) | (ULONG)(pAd->CommonCfg.StreamModeMac[2][3] << 24)); RTMP_IO_WRITE32(pAd, TX_CHAIN_ADDR2_H, streamWord | (ULONG)(pAd->CommonCfg.StreamModeMac[2][4]) | (ULONG)(pAd->CommonCfg.StreamModeMac[2][5] << 8)); RTMP_IO_WRITE32(pAd, TX_CHAIN_ADDR3_L, (ULONG)(pAd->CommonCfg.StreamModeMac[3][0]) | (ULONG)(pAd->CommonCfg.StreamModeMac[3][1] << 8) | (ULONG)(pAd->CommonCfg.StreamModeMac[3][2] << 16) | (ULONG)(pAd->CommonCfg.StreamModeMac[3][3] << 24)); RTMP_IO_WRITE32(pAd, TX_CHAIN_ADDR3_H, streamWord | (ULONG)(pAd->CommonCfg.StreamModeMac[3][4]) | (ULONG)(pAd->CommonCfg.StreamModeMac[3][5] << 8)); } #endif // STREAM_MODE_SUPPORT // } #endif // CONFIG_AP_SUPPORT // if (pAd->CommonCfg.FineAGC) { UINT8 BBPValue = 0; BBP_IO_READ8_BY_REG_ID(pAd, BBP_R65, &BBPValue); BBPValue |= 0x40; // turn on fine AGC BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R65, BBPValue); } else { UINT8 BBPValue = 0; BBP_IO_READ8_BY_REG_ID(pAd, BBP_R65, &BBPValue); BBPValue &= ~0x40; // turn off fine AGC BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R65, BBPValue); } #endif // defined(RT2883) || defined(RT3883) // #ifdef DOT11_N_SUPPORT #ifdef TXBF_SUPPORT if (pAd->CommonCfg.ITxBfTimeout) { RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R179, 0x02); RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R180, 0); RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R182, pAd->CommonCfg.ITxBfTimeout & 0xFF); RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R180, 1); RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R182, (pAd->CommonCfg.ITxBfTimeout>>8) & 0xFF); }
INT scan_ch_restore(RTMP_ADAPTER *pAd, UCHAR OpMode) { INT bw, ch; if (pAd->CommonCfg.BBPCurrentBW != pAd->hw_cfg.bbp_bw) rtmp_bbp_set_bw(pAd, pAd->hw_cfg.bbp_bw); if (pAd->hw_cfg.bbp_bw == BW_80) ch = pAd->CommonCfg.vht_cent_ch; else if (pAd->hw_cfg.bbp_bw == BW_40) ch = pAd->CommonCfg.CentralChannel; else ch = pAd->CommonCfg.Channel; ASSERT((ch != 0)); AsicSwitchChannel(pAd, ch, FALSE); AsicLockChannel(pAd, ch); switch(pAd->CommonCfg.BBPCurrentBW) { case BW_80: bw = 80; break; case BW_40: bw = 40; break; case BW_10: bw = 10; break; case BW_20: default: bw =20; break; } DBGPRINT(RT_DEBUG_TRACE, ("SYNC - End of SCAN, restore to %dMHz channel %d, Total BSS[%02d]\n", bw, ch, pAd->ScanTab.BssNr)); #ifdef CONFIG_AP_SUPPORT if (OpMode == OPMODE_AP) { #ifdef APCLI_SUPPORT #ifdef APCLI_AUTO_CONNECT_SUPPORT if (pAd->ApCfg.ApCliAutoConnectRunning == TRUE) { if (!ApCliAutoConnectExec(pAd)) { DBGPRINT(RT_DEBUG_ERROR, ("Error in %s\n", __FUNCTION__)); } } #endif /* APCLI_AUTO_CONNECT_SUPPORT */ #endif /* APCLI_SUPPORT */ pAd->Mlme.ApSyncMachine.CurrState = AP_SYNC_IDLE; RTMPResumeMsduTransmission(pAd); /* keep the latest scan channel, could be 0 for scan complete, or other channel */ pAd->ApCfg.LastScanChannel = pAd->MlmeAux.Channel; pAd->ApCfg.ScanChannelCnt=0; /* Suspend scanning and Resume TxData for Fast Scanning */ if ((pAd->MlmeAux.Channel != 0) && (pAd->ApCfg.bImprovedScan)) { pAd->Mlme.ApSyncMachine.CurrState = AP_SCAN_PENDING; DBGPRINT(RT_DEBUG_TRACE, ("bImprovedScan ~~ Get back to send data\n")); } else pAd->ApCfg.bImprovedScan = FALSE; #ifdef CON_WPS if (pAd->conWscStatus != CON_WPS_STATUS_DISABLED) { MlmeEnqueue(pAd, AP_SYNC_STATE_MACHINE, APMT2_MLME_SCAN_COMPLETE, 0, NULL,0 ); RTMP_MLME_HANDLER(pAd); } #endif /* CON_WPS*/ /* iwpriv set auto channel selection*/ /* scanned all channels*/ if (pAd->ApCfg.bAutoChannelAtBootup==TRUE) { pAd->CommonCfg.Channel = SelectBestChannel(pAd, pAd->ApCfg.AutoChannelAlg); pAd->ApCfg.bAutoChannelAtBootup = FALSE; #ifdef DOT11_N_SUPPORT N_ChannelCheck(pAd); #endif /* DOT11_N_SUPPORT */ APStop(pAd); APStartUp(pAd); } if ((pAd->CommonCfg.Channel > 14) && (pAd->CommonCfg.bIEEE80211H == TRUE) && RadarChannelCheck(pAd, pAd->CommonCfg.Channel) && pAd->Dot11_H.RDMode != RD_SWITCHING_MODE) { if (pAd->Dot11_H.InServiceMonitorCount) { pAd->Dot11_H.RDMode = RD_NORMAL_MODE; AsicEnableBssSync(pAd); } else { pAd->Dot11_H.RDMode = RD_SILENCE_MODE; } } else { AsicEnableBssSync(pAd); } } #endif /* CONFIG_AP_SUPPORT */ return TRUE; }
int rt28xx_init( IN PRTMP_ADAPTER pAd, IN PSTRING pDefaultMac, IN PSTRING pHostName) { UINT index; UCHAR TmpPhy; NDIS_STATUS Status; UINT32 MacCsr0 = 0; UINT16 ChipId = 0; // reset Adapter flags RTMP_CLEAR_FLAGS(pAd); // Init BssTab & ChannelInfo tabbles for auto channel select. #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) { //#ifdef AUTO_CH_SELECT_ENHANCE AutoChBssTableInit(pAd); ChannelInfoInit(pAd); //#endif // AUTO_CH_SELECT_ENHANCE // } #endif // CONFIG_AP_SUPPORT // #ifdef DOT11_N_SUPPORT // Allocate BA Reordering memory if (ba_reordering_resource_init(pAd, MAX_REORDERING_MPDU_NUM) != TRUE) goto err1; #endif // DOT11_N_SUPPORT // // Make sure MAC gets ready. index = 0; do { RTMP_IO_READ32(pAd, MAC_CSR0, &MacCsr0); pAd->MACVersion = MacCsr0; /* The purpose is to identify RT5390H */ RT28xx_EEPROM_READ16(pAd, 0x00, ChipId); pAd->ChipId = ChipId; if ((pAd->MACVersion != 0x00) && (pAd->MACVersion != 0xFFFFFFFF)) break; if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)) goto err1; RTMPusecDelay(10); } while (index++ < 100); DBGPRINT(RT_DEBUG_TRACE, ("MAC_CSR0 [ Ver:Rev=0x%08x]\n", pAd->MACVersion)); #ifdef RT5390 if (IS_RT5390H(pAd)) DBGPRINT(RT_DEBUG_ERROR, ("The chip belongs to 0x%04x\n", pAd->ChipId)); #endif /* RT5390 */ #ifdef SPECIFIC_BCN_BUF_SUPPORT pAd->BcnCB.DYN_MAX_MBSSID_NUM = 1; if (IS_RT5390(pAd) || IS_RT3593(pAd)) { pAd->BcnCB.bHighShareMemSupport = 1; pAd->BcnCB.DYN_HW_BEACON_BASE0 = 0x4000; pAd->BcnCB.DYN_HW_BEACON_MAX_SIZE = 0x2000; pAd->BcnCB.DYN_HW_BEACON_MAX_COUNT = 16; #ifdef MBSS_SUPPORT #ifdef APCLI_SUPPORT pAd->BcnCB.DYN_MAX_MBSSID_NUM = 8 - MAX_MESH_NUM; #else pAd->BcnCB.DYN_MAX_MBSSID_NUM = 16 - MAX_MESH_NUM; #endif // APCLI_SUPPORT // #endif // MBSS_SUPPORT // } else { pAd->BcnCB.bHighShareMemSupport = 0; pAd->BcnCB.DYN_HW_BEACON_BASE0 = 0x7800; pAd->BcnCB.DYN_HW_BEACON_MAX_SIZE = 0x1000; pAd->BcnCB.DYN_HW_BEACON_MAX_COUNT = 8; #ifdef MBSS_SUPPORT pAd->BcnCB.DYN_MAX_MBSSID_NUM = (pAd->BcnCB.DYN_HW_BEACON_MAX_COUNT - MAX_MESH_NUM - MAX_APCLI_NUM); #endif // MBSS_SUPPORT // } #endif // SPECIFIC_BCN_BUF_SUPPORT // #ifdef RTMP_MAC_PCI #if defined(RT3090) || defined(RT3592) || defined(RT3390) || defined(RT3593) || defined(RT5390) /*Iverson patch PCIE L1 issue to make sure that driver can be read,write ,BBP and RF register at pcie L.1 level */ if ((IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd) || IS_RT3593(pAd) || IS_RT5390(pAd))&&pAd->infType==RTMP_DEV_INF_PCIE) { RTMP_IO_READ32(pAd, AUX_CTRL, &MacCsr0); MacCsr0 |= 0x402; RTMP_IO_WRITE32(pAd, AUX_CTRL, MacCsr0); DBGPRINT(RT_DEBUG_TRACE, ("AUX_CTRL = 0x%x\n", MacCsr0)); } #endif // RT3090 // // To fix driver disable/enable hang issue when radio off RTMP_IO_WRITE32(pAd, PWR_PIN_CFG, 0x2); #endif // RTMP_MAC_PCI // // Disable DMA RT28XXDMADisable(pAd); // Load 8051 firmware Status = NICLoadFirmware(pAd); if (Status != NDIS_STATUS_SUCCESS) { DBGPRINT_ERR(("NICLoadFirmware failed, Status[=0x%08x]\n", Status)); goto err1; } NICLoadRateSwitchingParams(pAd); // Disable interrupts here which is as soon as possible // This statement should never be true. We might consider to remove it later #ifdef RTMP_MAC_PCI if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_ACTIVE)) { RTMP_ASIC_INTERRUPT_DISABLE(pAd); } #endif // RTMP_MAC_PCI // #ifdef RESOURCE_PRE_ALLOC Status = RTMPInitTxRxRingMemory(pAd); #else Status = RTMPAllocTxRxRingMemory(pAd); #endif // RESOURCE_PRE_ALLOC // if (Status != NDIS_STATUS_SUCCESS) { DBGPRINT_ERR(("RTMPAllocTxRxMemory failed, Status[=0x%08x]\n", Status)); goto err2; } RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE); // initialize MLME // Status = RtmpMgmtTaskInit(pAd); if (Status != NDIS_STATUS_SUCCESS) goto err3; Status = MlmeInit(pAd); if (Status != NDIS_STATUS_SUCCESS) { DBGPRINT_ERR(("MlmeInit failed, Status[=0x%08x]\n", Status)); goto err4; } #ifdef RMTP_RBUS_SUPPORT #ifdef VIDEO_TURBINE_SUPPORT VideoConfigInit(pAd); #endif // VIDEO_TURBINE_SUPPORT // #endif // RMTP_RBUS_SUPPORT // // Initialize pAd->StaCfg, pAd->ApCfg, pAd->CommonCfg to manufacture default // UserCfgInit(pAd); Status = RtmpNetTaskInit(pAd); if (Status != NDIS_STATUS_SUCCESS) goto err5; // COPY_MAC_ADDR(pAd->ApCfg.MBSSID[apidx].Bssid, netif->hwaddr); // pAd->bForcePrintTX = TRUE; CfgInitHook(pAd); #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) APInitialize(pAd); #endif // CONFIG_AP_SUPPORT // #ifdef BLOCK_NET_IF initblockQueueTab(pAd); #endif // BLOCK_NET_IF // Status = MeasureReqTabInit(pAd); if (Status != NDIS_STATUS_SUCCESS) { DBGPRINT_ERR(("MeasureReqTabInit failed, Status[=0x%08x]\n",Status)); goto err6; } Status = TpcReqTabInit(pAd); if (Status != NDIS_STATUS_SUCCESS) { DBGPRINT_ERR(("TpcReqTabInit failed, Status[=0x%08x]\n",Status)); goto err6; } // // Init the hardware, we need to init asic before read registry, otherwise mac register will be reset // Status = NICInitializeAdapter(pAd, TRUE); if (Status != NDIS_STATUS_SUCCESS) { DBGPRINT_ERR(("NICInitializeAdapter failed, Status[=0x%08x]\n", Status)); if (Status != NDIS_STATUS_SUCCESS) goto err6; } #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) { } #endif // CONFIG_AP_SUPPORT // // Read parameters from Config File /* unknown, it will be updated in NICReadEEPROMParameters */ pAd->RfIcType = RFIC_UNKNOWN; Status = RTMPReadParametersHook(pAd); DBGPRINT(RT_DEBUG_OFF, ("1. Phy Mode = %d\n", pAd->CommonCfg.PhyMode)); if (Status != NDIS_STATUS_SUCCESS) { DBGPRINT_ERR(("RTMPReadParametersHook failed, Status[=0x%08x]\n",Status)); goto err6; } #ifdef DOT11_N_SUPPORT //Init Ba Capability parameters. // RT28XX_BA_INIT(pAd); pAd->CommonCfg.DesiredHtPhy.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity; pAd->CommonCfg.DesiredHtPhy.AmsduEnable = (USHORT)pAd->CommonCfg.BACapability.field.AmsduEnable; pAd->CommonCfg.DesiredHtPhy.AmsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize; pAd->CommonCfg.DesiredHtPhy.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode; // UPdata to HT IE pAd->CommonCfg.HtCapability.HtCapInfo.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode; pAd->CommonCfg.HtCapability.HtCapInfo.AMsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize; pAd->CommonCfg.HtCapability.HtCapParm.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity; #endif // DOT11_N_SUPPORT // // after reading Registry, we now know if in AP mode or STA mode // Load 8051 firmware; crash when FW image not existent // Status = NICLoadFirmware(pAd); // if (Status != NDIS_STATUS_SUCCESS) // break; DBGPRINT(RT_DEBUG_OFF, ("2. Phy Mode = %d\n", pAd->CommonCfg.PhyMode)); // We should read EEPROM for all cases. rt2860b NICReadEEPROMParameters(pAd, (PUCHAR)pDefaultMac); DBGPRINT(RT_DEBUG_OFF, ("3. Phy Mode = %d\n", pAd->CommonCfg.PhyMode)); NICInitAsicFromEEPROM(pAd); //rt2860b #ifdef RTMP_INTERNAL_TX_ALC // // Initialize the desired TSSI table // InitDesiredTSSITable(pAd); #endif // RTMP_INTERNAL_TX_ALC // #if defined(RT5390) || defined(RT5370) // // Temperature compensation, initialize the lookup table // DBGPRINT(RT_DEBUG_ERROR, ("IS_RT5392 = %d, bAutoTxAgcG = %d\n", IS_RT5392(pAd), pAd->bAutoTxAgcG)); if (IS_RT5392(pAd) && pAd->bAutoTxAgcG && pAd->CommonCfg.TempComp != 0) { InitLookupTable(pAd); } #endif // defined(RT5390) || defined(RT5370) // // Set PHY to appropriate mode TmpPhy = pAd->CommonCfg.PhyMode; pAd->CommonCfg.PhyMode = 0xff; RTMPSetPhyMode(pAd, TmpPhy); #ifdef DOT11_N_SUPPORT SetCommonHT(pAd); #endif // DOT11_N_SUPPORT // // No valid channels. if (pAd->ChannelListNum == 0) { DBGPRINT(RT_DEBUG_ERROR, ("Wrong configuration. No valid channel found. Check \"ContryCode\" and \"ChannelGeography\" setting.\n")); goto err6; } #ifdef DOT11_N_SUPPORT DBGPRINT(RT_DEBUG_OFF, ("MCS Set = %02x %02x %02x %02x %02x\n", pAd->CommonCfg.HtCapability.MCSSet[0], pAd->CommonCfg.HtCapability.MCSSet[1], pAd->CommonCfg.HtCapability.MCSSet[2], pAd->CommonCfg.HtCapability.MCSSet[3], pAd->CommonCfg.HtCapability.MCSSet[4])); #endif // DOT11_N_SUPPORT // #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) { #ifdef AP_QLOAD_SUPPORT /* init QBSS Element */ QBSS_LoadInit(pAd); #endif // AP_QLOAD_SUPPORT // //#ifdef DOT11K_RRM_SUPPORT // RRM_CfgInit(pAd); //#endif // DOT11K_RRM_SUPPORT // } #endif // CONFIG_AP_SUPPORT // // APInitialize(pAd); #ifdef IKANOS_VX_1X0 VR_IKANOS_FP_Init(pAd->ApCfg.BssidNum, pAd->PermanentAddress); #endif // IKANOS_VX_1X0 // #ifdef CONFIG_AP_SUPPORT // // Initialize RF register to default value // if (pAd->OpMode == OPMODE_AP) { AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE); AsicLockChannel(pAd, pAd->CommonCfg.Channel); } #endif // CONFIG_AP_SUPPORT // /* Some modules init must be called before APStartUp(). Or APStartUp() will make up beacon content and call other modules API to get some information to fill. */ #ifdef WMM_ACM_SUPPORT #ifdef CONFIG_AP_SUPPORT ACMP_Init(pAd, pAd->CommonCfg.APEdcaParm.bACM[0], pAd->CommonCfg.APEdcaParm.bACM[1], pAd->CommonCfg.APEdcaParm.bACM[2], pAd->CommonCfg.APEdcaParm.bACM[3], 0); #endif // CONFIG_AP_SUPPORT // #endif // WMM_ACM_SUPPORT // if (pAd && (Status != NDIS_STATUS_SUCCESS)) { // // Undo everything if it failed // if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE)) { // NdisMDeregisterInterrupt(&pAd->Interrupt); RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE); } // RTMPFreeAdapter(pAd); // we will free it in disconnect() } else if (pAd) { // Microsoft HCT require driver send a disconnect event after driver initialization. OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED); RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_MEDIA_STATE_CHANGE); DBGPRINT(RT_DEBUG_TRACE, ("NDIS_STATUS_MEDIA_DISCONNECT Event B!\n")); #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) { if (pAd->ApCfg.bAutoChannelAtBootup || (pAd->CommonCfg.Channel == 0)) { UINT8 BBPValue = 0; // Enable Interrupt first due to we need to scan channel to receive beacons. RTMP_IRQ_ENABLE(pAd); // Now Enable RxTx RTMPEnableRxTx(pAd); RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_START_UP); // Let BBP register at 20MHz to do scan RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue); BBPValue &= (~0x18); RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue); DBGPRINT(RT_DEBUG_ERROR, ("SYNC - BBP R4 to 20MHz.l\n")); // Now we can receive the beacon and do the listen beacon // use default BW to select channel pAd->CommonCfg.Channel = AP_AUTO_CH_SEL(pAd, pAd->ApCfg.AutoChannelAlg); pAd->ApCfg.bAutoChannelAtBootup = FALSE; } #ifdef DOT11_N_SUPPORT // If phymode > PHY_11ABGN_MIXED and BW=40 check extension channel, after select channel N_ChannelCheck(pAd); #ifdef DOT11N_DRAFT3 /* We only do this Overlapping BSS Scan when system up, for the other situation of channel changing, we depends on station's report to adjust ourself. */ if (pAd->CommonCfg.bForty_Mhz_Intolerant == TRUE) { DBGPRINT(RT_DEBUG_TRACE, ("Disable 20/40 BSSCoex Channel Scan(BssCoex=%d, 40MHzIntolerant=%d)\n", pAd->CommonCfg.bBssCoexEnable, pAd->CommonCfg.bForty_Mhz_Intolerant)); } else if(pAd->CommonCfg.bBssCoexEnable == TRUE) { DBGPRINT(RT_DEBUG_TRACE, ("Enable 20/40 BSSCoex Channel Scan(BssCoex=%d)\n", pAd->CommonCfg.bBssCoexEnable)); APOverlappingBSSScan(pAd); } RTMP_11N_D3_TimerInit(pAd); // RTMPInitTimer(pAd, &pAd->CommonCfg.Bss2040CoexistTimer, GET_TIMER_FUNCTION(Bss2040CoexistTimeOut), pAd, FALSE); #endif // DOT11N_DRAFT3 // #endif // DOT11_N_SUPPORT // #ifdef RT3090 #ifdef TONE_RADAR_DETECT_SUPPORT if (IS_RT3090A(pAd) || IS_RT3390(pAd) || IS_RT5390(pAd)) pAd->CommonCfg.carrier_func=TONE_RADAR_V2; else pAd->CommonCfg.carrier_func=TONE_RADAR_V1; #endif // TONE_RADAR_DETECT_SUPPORT // #endif // RT3090 // APStartUp(pAd); DBGPRINT(RT_DEBUG_OFF, ("Main bssid = %02x:%02x:%02x:%02x:%02x:%02x\n", PRINT_MAC(pAd->ApCfg.MBSSID[BSS0].Bssid))); } #endif // CONFIG_AP_SUPPORT // }// end of else #ifdef WSC_INCLUDED #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) { INT apidx; #ifdef HOSTAPD_SUPPORT if (pAd->ApCfg.Hostapd == TRUE) { DBGPRINT(RT_DEBUG_TRACE, ("WPS is control by hostapd now.\n")); } else #endif //HOSTAPD_SUPPORT// for (apidx = 0; apidx < pAd->ApCfg.BssidNum; apidx++) { PWSC_CTRL pWscControl; UCHAR zeros16[16]= {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0}; pWscControl = &pAd->ApCfg.MBSSID[apidx].WscControl; DBGPRINT(RT_DEBUG_TRACE, ("Generate UUID for apidx(%d)\n", apidx)); if (NdisEqualMemory(&pWscControl->Wsc_Uuid_E[0], zeros16, UUID_LEN_HEX)) WscGenerateUUID(pAd, &pWscControl->Wsc_Uuid_E[0], &pWscControl->Wsc_Uuid_Str[0], apidx, FALSE); WscInit(pAd, FALSE, apidx); } } #endif // CONFIG_AP_SUPPORT // /* WSC hardware push button function 0811 */ WSC_HDR_BTN_Init(pAd); #endif // WSC_INCLUDED // // Set up the Mac address RtmpOSNetDevAddrSet(pAd->net_dev, &pAd->CurrentAddress[0]); // Various AP function init #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) { #ifdef MBSS_SUPPORT /* the function can not be moved to RT2860_probe() even register_netdev() is changed as register_netdevice(). Or in some PC, kernel will panic (Fedora 4) */ RT28xx_MBSS_Init(pAd, pAd->net_dev); #endif // MBSS_SUPPORT // #ifdef WDS_SUPPORT RT28xx_WDS_Init(pAd, pAd->net_dev); #endif // WDS_SUPPORT // #ifdef APCLI_SUPPORT RT28xx_ApCli_Init(pAd, pAd->net_dev); #endif // APCLI_SUPPORT // } #endif // CONFIG_AP_SUPPORT // #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) { #ifdef MAT_SUPPORT MATEngineInit(pAd); #endif // MAT_SUPPORT // #ifdef CLIENT_WDS CliWds_ProxyTabInit(pAd); #endif // CLIENT_WDS // } #endif // CONFIG_AP_SUPPORT // #ifdef RT33xx if (IS_RT3390(pAd)) { RTMP_TxEvmCalibration(pAd); } #endif // RT33xx // DBGPRINT_S(Status, ("<==== rt28xx_init, Status=%x\n", Status)); return TRUE; err6: MeasureReqTabExit(pAd); TpcReqTabExit(pAd); err5: RtmpNetTaskExit(pAd); UserCfgExit(pAd); err4: MlmeHalt(pAd); err3: RtmpMgmtTaskExit(pAd); err2: #ifdef RESOURCE_PRE_ALLOC RTMPResetTxRxRingMemory(pAd); #else RTMPFreeTxRxRingMemory(pAd); #endif // RESOURCE_PRE_ALLOC // err1: #ifdef DOT11_N_SUPPORT if(pAd->mpdu_blk_pool.mem) os_free_mem(pAd, pAd->mpdu_blk_pool.mem); // free BA pool #endif // DOT11_N_SUPPORT // // shall not set priv to NULL here because the priv didn't been free yet. //net_dev->priv = 0; #ifdef INF_AMAZON_SE err0: #endif // INF_AMAZON_SE // #ifdef ST err0: #endif // ST // DBGPRINT(RT_DEBUG_ERROR, ("!!! rt28xx Initialized fail !!!\n")); return FALSE; }
RTMP_BUILD_DRV_OPS_FUNCTION_BODY #endif /* OS_ABL_FUNC_SUPPORT */ #endif /* LINUX */ int rt28xx_init( IN VOID *pAdSrc, IN PSTRING pDefaultMac, IN PSTRING pHostName) { PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdSrc; UINT index; UCHAR TmpPhy; NDIS_STATUS Status; if (pAd == NULL) return FALSE; /* reset Adapter flags*/ RTMP_CLEAR_FLAGS(pAd); /* Init BssTab & ChannelInfo tabbles for auto channel select.*/ #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) { AutoChBssTableInit(pAd); ChannelInfoInit(pAd); } #endif /* CONFIG_AP_SUPPORT */ #ifdef DOT11_N_SUPPORT /* Allocate BA Reordering memory*/ if (ba_reordering_resource_init(pAd, MAX_REORDERING_MPDU_NUM) != TRUE) goto err1; #endif /* DOT11_N_SUPPORT */ /* Make sure MAC gets ready.*/ index = 0; if (WaitForAsicReady(pAd) != TRUE) goto err1; DBGPRINT(RT_DEBUG_TRACE, ("MAC[Ver:Rev=0x%08x]\n", pAd->MACVersion)); if (MAX_LEN_OF_MAC_TABLE > MAX_AVAILABLE_CLIENT_WCID(pAd)) { DBGPRINT(RT_DEBUG_ERROR, ("MAX_LEN_OF_MAC_TABLE can not be larger than MAX_AVAILABLE_CLIENT_WCID!!!!\n")); goto err1; } #ifdef RTMP_MAC_PCI #if defined(RT3090) || defined(RT3592) || defined(RT3390) || defined(RT3593) || defined(RT5390) || defined(RT5392) || defined(RT5592) /*Iverson patch PCIE L1 issue to make sure that driver can be read,write ,BBP and RF register at pcie L.1 level */ if ((IS_RT3090(pAd) || IS_RT3572(pAd) ||IS_RT3390(pAd) || IS_RT3593(pAd) || IS_RT5390(pAd) || IS_RT5392(pAd) || IS_RT5592(pAd)) &&pAd->infType==RTMP_DEV_INF_PCIE) { UINT32 MacValue = 0; RTMP_IO_READ32(pAd, AUX_CTRL, &MacValue); MacValue |= 0x402; RTMP_IO_WRITE32(pAd, AUX_CTRL, MacValue); DBGPRINT(RT_DEBUG_TRACE, ("AUX_CTRL = 0x%x\n", MacValue)); } #endif /* To fix driver disable/enable hang issue when radio off*/ RTMP_IO_WRITE32(pAd, PWR_PIN_CFG, 0x2); #endif /* RTMP_MAC_PCI */ /* Disable DMA*/ RT28XXDMADisable(pAd); /* Load 8051 firmware*/ Status = NICLoadFirmware(pAd); if (Status != NDIS_STATUS_SUCCESS) { DBGPRINT_ERR(("NICLoadFirmware failed, Status[=0x%08x]\n", Status)); goto err1; } NICLoadRateSwitchingParams(pAd); /* Disable interrupts here which is as soon as possible*/ /* This statement should never be true. We might consider to remove it later*/ #ifdef RTMP_MAC_PCI if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_ACTIVE)) { RTMP_ASIC_INTERRUPT_DISABLE(pAd); } #endif /* RTMP_MAC_PCI */ #ifdef RESOURCE_PRE_ALLOC Status = RTMPInitTxRxRingMemory(pAd); #else Status = RTMPAllocTxRxRingMemory(pAd); #endif /* RESOURCE_PRE_ALLOC */ if (Status != NDIS_STATUS_SUCCESS) { DBGPRINT_ERR(("RTMPAllocTxRxMemory failed, Status[=0x%08x]\n", Status)); goto err2; } RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE); /* initialize MLME*/ Status = RtmpMgmtTaskInit(pAd); if (Status != NDIS_STATUS_SUCCESS) goto err3; Status = MlmeInit(pAd); if (Status != NDIS_STATUS_SUCCESS) { DBGPRINT_ERR(("MlmeInit failed, Status[=0x%08x]\n", Status)); goto err4; } #ifdef RT_SOC_SUPPORT #ifdef VIDEO_TURBINE_SUPPORT VideoConfigInit(pAd); #endif /* VIDEO_TURBINE_SUPPORT */ #endif /* RT_SOC_SUPPORT */ /* Initialize pAd->StaCfg, pAd->ApCfg, pAd->CommonCfg to manufacture default*/ UserCfgInit(pAd); Status = RtmpNetTaskInit(pAd); if (Status != NDIS_STATUS_SUCCESS) goto err5; /* COPY_MAC_ADDR(pAd->ApCfg.MBSSID[apidx].Bssid, netif->hwaddr);*/ /* pAd->bForcePrintTX = TRUE;*/ CfgInitHook(pAd); #ifdef CONFIG_AP_SUPPORT if ((pAd->OpMode == OPMODE_AP) ) APInitialize(pAd); #endif /* CONFIG_AP_SUPPORT */ #ifdef BLOCK_NET_IF initblockQueueTab(pAd); #endif /* BLOCK_NET_IF */ Status = MeasureReqTabInit(pAd); if (Status != NDIS_STATUS_SUCCESS) { DBGPRINT_ERR(("MeasureReqTabInit failed, Status[=0x%08x]\n",Status)); goto err6; } Status = TpcReqTabInit(pAd); if (Status != NDIS_STATUS_SUCCESS) { DBGPRINT_ERR(("TpcReqTabInit failed, Status[=0x%08x]\n",Status)); goto err6; } /* Init the hardware, we need to init asic before read registry, otherwise mac register will be reset*/ Status = NICInitializeAdapter(pAd, TRUE); if (Status != NDIS_STATUS_SUCCESS) { DBGPRINT_ERR(("NICInitializeAdapter failed, Status[=0x%08x]\n", Status)); if (Status != NDIS_STATUS_SUCCESS) goto err6; } #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) { } #endif /* CONFIG_AP_SUPPORT */ /* Read parameters from Config File */ /* unknown, it will be updated in NICReadEEPROMParameters */ pAd->RfIcType = RFIC_UNKNOWN; Status = RTMPReadParametersHook(pAd); /* Set eeprom related hook functions */ Status = RtmpChipOpsEepromHook(pAd, pAd->infType); DBGPRINT(RT_DEBUG_OFF, ("1. Phy Mode = %d\n", pAd->CommonCfg.PhyMode)); if (Status != NDIS_STATUS_SUCCESS) { DBGPRINT_ERR(("RTMPReadParametersHook failed, Status[=0x%08x]\n",Status)); goto err6; } #ifdef DOT11_N_SUPPORT /*Init Ba Capability parameters.*/ /* RT28XX_BA_INIT(pAd);*/ pAd->CommonCfg.DesiredHtPhy.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity; pAd->CommonCfg.DesiredHtPhy.AmsduEnable = (USHORT)pAd->CommonCfg.BACapability.field.AmsduEnable; pAd->CommonCfg.DesiredHtPhy.AmsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize; pAd->CommonCfg.DesiredHtPhy.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode; /* UPdata to HT IE*/ pAd->CommonCfg.HtCapability.HtCapInfo.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode; pAd->CommonCfg.HtCapability.HtCapInfo.AMsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize; pAd->CommonCfg.HtCapability.HtCapParm.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity; #endif /* DOT11_N_SUPPORT */ /* after reading Registry, we now know if in AP mode or STA mode*/ /* Load 8051 firmware; crash when FW image not existent*/ /* Status = NICLoadFirmware(pAd);*/ /* if (Status != NDIS_STATUS_SUCCESS)*/ /* break;*/ DBGPRINT(RT_DEBUG_OFF, ("2. Phy Mode = %d\n", pAd->CommonCfg.PhyMode)); /* We should read EEPROM for all cases. rt2860b*/ NICReadEEPROMParameters(pAd, (PSTRING)pDefaultMac); DBGPRINT(RT_DEBUG_OFF, ("3. Phy Mode = %d\n", pAd->CommonCfg.PhyMode)); #ifdef LED_CONTROL_SUPPORT /* Send LED Setting to MCU */ RTMPInitLEDMode(pAd); #endif /* LED_CONTROL_SUPPORT */ NICInitAsicFromEEPROM(pAd); /* rt2860b */ #ifdef RALINK_ATE if (ATEInit(pAd) != NDIS_STATUS_SUCCESS) { DBGPRINT(RT_DEBUG_ERROR, ("%s(): ATE initialization failed !\n", __FUNCTION__)); goto err6; } #endif /* RALINK_ATE */ #ifdef RTMP_FREQ_CALIBRATION_SUPPORT #endif /* RTMP_FREQ_CALIBRATION_SUPPORT */ #ifdef RTMP_INTERNAL_TX_ALC /* Initialize the desired TSSI table*/ RTMP_CHIP_ASIC_TSSI_TABLE_INIT(pAd); #endif /* RTMP_INTERNAL_TX_ALC */ #ifdef RTMP_TEMPERATURE_COMPENSATION /* Temperature compensation, initialize the lookup table */ DBGPRINT(RT_DEBUG_OFF, ("bAutoTxAgcG = %d\n", pAd->bAutoTxAgcG)); if (pAd->chipCap.bTempCompTxALC && pAd->bAutoTxAgcG) InitLookupTable(pAd); #endif /* RTMP_TEMPERATURE_COMPENSATION */ #ifdef RTMP_FREQ_CALIBRATION_SUPPORT #endif /* RTMP_FREQ_CALIBRATION_SUPPORT */ /* Set PHY to appropriate mode*/ TmpPhy = pAd->CommonCfg.PhyMode; pAd->CommonCfg.PhyMode = 0xff; RTMPSetPhyMode(pAd, TmpPhy); #ifdef DOT11_N_SUPPORT SetCommonHT(pAd); #endif /* DOT11_N_SUPPORT */ /* No valid channels.*/ if (pAd->ChannelListNum == 0) { DBGPRINT(RT_DEBUG_ERROR, ("Wrong configuration. No valid channel found. Check \"ContryCode\" and \"ChannelGeography\" setting.\n")); goto err6; } #ifdef DOT11_N_SUPPORT DBGPRINT(RT_DEBUG_OFF, ("MCS Set = %02x %02x %02x %02x %02x\n", pAd->CommonCfg.HtCapability.MCSSet[0], pAd->CommonCfg.HtCapability.MCSSet[1], pAd->CommonCfg.HtCapability.MCSSet[2], pAd->CommonCfg.HtCapability.MCSSet[3], pAd->CommonCfg.HtCapability.MCSSet[4])); #endif /* DOT11_N_SUPPORT */ #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) { #ifdef AP_QLOAD_SUPPORT /* init QBSS Element */ QBSS_LoadInit(pAd); #endif /* AP_QLOAD_SUPPORT */ } #endif /* CONFIG_AP_SUPPORT */ /* APInitialize(pAd);*/ #ifdef IKANOS_VX_1X0 VR_IKANOS_FP_Init(pAd->ApCfg.BssidNum, pAd->PermanentAddress); #endif /* IKANOS_VX_1X0 */ #ifdef RALINK_ATE #ifdef RT5592 #ifdef RTMP_RF_RW_SUPPORT /* both for RT5572 and RT5592 */ if (IS_RT5592(pAd)) { RT55x2ATEFilterCalibration(pAd); } #endif /* RTMP_RF_RW_SUPPORT */ #endif /* RT5592 */ #endif /* RALINK_ATE */ #ifdef CONFIG_AP_SUPPORT /* Initialize RF register to default value*/ if (pAd->OpMode == OPMODE_AP) { AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE); AsicLockChannel(pAd, pAd->CommonCfg.Channel); } #endif /* CONFIG_AP_SUPPORT */ /* Some modules init must be called before APStartUp(). Or APStartUp() will make up beacon content and call other modules API to get some information to fill. */ #ifdef CONFIG_TSO_SUPPORT if (RTMP_TEST_MORE_FLAG(pAd, fRTMP_ADAPTER_TSO_SUPPORT)) RTMPTsoEnable(pAd); #endif /* CONFIG_TSO_SUPPORT */ if (pAd && (Status != NDIS_STATUS_SUCCESS)) { /* Undo everything if it failed*/ if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE)) { /* NdisMDeregisterInterrupt(&pAd->Interrupt);*/ RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE); } /* RTMPFreeAdapter(pAd); we will free it in disconnect()*/ } else if (pAd) { /* Microsoft HCT require driver send a disconnect event after driver initialization.*/ OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED); OPSTATUS_CLEAR_FLAG(pAd, fOP_AP_STATUS_MEDIA_STATE_CONNECTED); RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_MEDIA_STATE_CHANGE); DBGPRINT(RT_DEBUG_TRACE, ("NDIS_STATUS_MEDIA_DISCONNECT Event B!\n")); #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) { if (pAd->ApCfg.bAutoChannelAtBootup || (pAd->CommonCfg.Channel == 0)) { UINT8 BBPValue = 0; /* Enable Interrupt first due to we need to scan channel to receive beacons.*/ RTMP_IRQ_ENABLE(pAd); /* Now Enable RxTx*/ RTMPEnableRxTx(pAd); RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_START_UP); /* Let BBP register at 20MHz to do scan */ RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue); BBPValue &= (~0x18); RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue); DBGPRINT(RT_DEBUG_ERROR, ("SYNC - BBP R4 to 20MHz.l\n")); /* Now we can receive the beacon and do the listen beacon*/ /* use default BW to select channel*/ pAd->CommonCfg.Channel = AP_AUTO_CH_SEL(pAd, pAd->ApCfg.AutoChannelAlg); pAd->ApCfg.bAutoChannelAtBootup = FALSE; } #ifdef DOT11_N_SUPPORT /* If phymode > PHY_11ABGN_MIXED and BW=40 check extension channel, after select channel */ N_ChannelCheck(pAd); #ifdef DOT11N_DRAFT3 /* We only do this Overlapping BSS Scan when system up, for the other situation of channel changing, we depends on station's report to adjust ourself. */ if (pAd->CommonCfg.bForty_Mhz_Intolerant == TRUE) { DBGPRINT(RT_DEBUG_TRACE, ("Disable 20/40 BSSCoex Channel Scan(BssCoex=%d, 40MHzIntolerant=%d)\n", pAd->CommonCfg.bBssCoexEnable, pAd->CommonCfg.bForty_Mhz_Intolerant)); } else if(pAd->CommonCfg.bBssCoexEnable == TRUE) { DBGPRINT(RT_DEBUG_TRACE, ("Enable 20/40 BSSCoex Channel Scan(BssCoex=%d)\n", pAd->CommonCfg.bBssCoexEnable)); APOverlappingBSSScan(pAd); } RTMP_11N_D3_TimerInit(pAd); /* RTMPInitTimer(pAd, &pAd->CommonCfg.Bss2040CoexistTimer, GET_TIMER_FUNCTION(Bss2040CoexistTimeOut), pAd, FALSE);*/ #endif /* DOT11N_DRAFT3 */ #endif /* DOT11_N_SUPPORT */ APStartUp(pAd); DBGPRINT(RT_DEBUG_OFF, ("Main bssid = %02x:%02x:%02x:%02x:%02x:%02x\n", PRINT_MAC(pAd->ApCfg.MBSSID[BSS0].Bssid))); } #endif /* CONFIG_AP_SUPPORT */ }/* end of else*/ /* Set up the Mac address*/ #ifdef CONFIG_AP_SUPPORT RtmpOSNetDevAddrSet(pAd->OpMode, pAd->net_dev, &pAd->CurrentAddress[0], NULL); #endif /* CONFIG_AP_SUPPORT */ /* Various AP function init*/ #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) { #ifdef MBSS_SUPPORT /* the function can not be moved to RT2860_probe() even register_netdev() is changed as register_netdevice(). Or in some PC, kernel will panic (Fedora 4) */ /* RT28xx_MBSS_Init(pAd, pAd->net_dev); os abl move to rt_main_dev.c*/ #endif /* MBSS_SUPPORT */ #ifdef WDS_SUPPORT /* RT28xx_WDS_Init(pAd, pAd->net_dev);*/ #endif /* WDS_SUPPORT */ #ifdef APCLI_SUPPORT /* RT28xx_ApCli_Init(pAd, pAd->net_dev);*/ #endif /* APCLI_SUPPORT */ } #endif /* CONFIG_AP_SUPPORT */ #ifdef UAPSD_SUPPORT UAPSD_Init(pAd); #endif /* UAPSD_SUPPORT */ /* assign function pointers*/ #ifdef MAT_SUPPORT /* init function pointers, used in OS_ABL */ RTMP_MATOpsInit(pAd); #endif /* MAT_SUPPORT */ #ifdef RT_SOC_SUPPORT if (pAd->infType == RTMP_DEV_INF_RBUS || pAd->infType == RTMP_DEV_INF_PCIE) { #ifdef VIDEO_TURBINE_SUPPORT VideoTurbineDynamicTune(pAd); #endif /* VIDEO_TURBINE_SUPPORT */ #ifdef RT3XXX_ANTENNA_DIVERSITY_SUPPORT RT3XXX_AntDiversity_Init(pAd); #endif /* RT3XXX_ANTENNA_DIVERSITY_SUPPORT */ } #endif /* RT_SOC_SUPPORT */ #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) { #ifdef MAT_SUPPORT MATEngineInit(pAd); #endif /* MAT_SUPPORT */ #ifdef CLIENT_WDS CliWds_ProxyTabInit(pAd); #endif /* CLIENT_WDS */ } #endif /* CONFIG_AP_SUPPORT */ /* auto-fall back settings */ RTMP_IO_WRITE32(pAd, HT_FBK_CFG1, 0xedcba980); #ifdef DOT11N_SS3_SUPPORT if (pAd->CommonCfg.TxStream >= 3) { RTMP_IO_WRITE32(pAd, TX_FBK_CFG_3S_0, 0x12111008); RTMP_IO_WRITE32(pAd, TX_FBK_CFG_3S_1, 0x16151413); } #endif /* DOT11N_SS3_SUPPORT */ #ifdef STREAM_MODE_SUPPORT RtmpStreamModeInit(pAd); #endif /* STREAM_MODE_SUPPORT */ #if defined(RT2883) || defined(RT3883) || defined(RT3593) if (IS_RT2883(pAd) || IS_RT3883(pAd) || IS_RT3593(pAd)) { UINT8 BBPValue = 0; BBP_IO_READ8_BY_REG_ID(pAd, BBP_R65, &BBPValue); if (pAd->CommonCfg.FineAGC) BBPValue |= 0x40; /* turn on fine AGC*/ else BBPValue &= ~0x40; /* turn off fine AGC*/ BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R65, BBPValue); } #endif /* defined(RT2883) || defined(RT3883) || defined(RT3593) */ #ifdef DOT11_N_SUPPORT #ifdef TXBF_SUPPORT if (pAd->CommonCfg.ITxBfTimeout) { RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R179, 0x02); RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R180, 0); RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R182, pAd->CommonCfg.ITxBfTimeout & 0xFF); RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R180, 1); RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R182, (pAd->CommonCfg.ITxBfTimeout>>8) & 0xFF); }
static INT scan_ch_restore(RTMP_ADAPTER *pAd, UCHAR OpMode) { INT bw, ch; if (pAd->CommonCfg.BBPCurrentBW != pAd->hw_cfg.bbp_bw) { rtmp_bbp_set_bw(pAd, pAd->hw_cfg.bbp_bw); AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE); AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel); ch = pAd->CommonCfg.CentralChannel; } else { AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE); AsicLockChannel(pAd, pAd->CommonCfg.Channel); ch = pAd->CommonCfg.Channel; } switch(pAd->CommonCfg.BBPCurrentBW) { case BW_80: bw = 80; break; case BW_40: bw = 40; break; case BW_10: bw = 10; break; case BW_20: default: bw =20; break; } DBGPRINT(RT_DEBUG_TRACE, ("SYNC - End of SCAN, restore to %dMHz channel %d, Total BSS[%02d]\n", bw, ch, pAd->ScanTab.BssNr)); #ifdef CONFIG_AP_SUPPORT if (OpMode == OPMODE_AP) { pAd->Mlme.ApSyncMachine.CurrState = AP_SYNC_IDLE; RTMPResumeMsduTransmission(pAd); /* iwpriv set auto channel selection*/ /* scanned all channels*/ if (pAd->ApCfg.bAutoChannelAtBootup==TRUE) { pAd->CommonCfg.Channel = SelectBestChannel(pAd, pAd->ApCfg.AutoChannelAlg); pAd->ApCfg.bAutoChannelAtBootup = FALSE; #ifdef DOT11_N_SUPPORT N_ChannelCheck(pAd); #endif /* DOT11_N_SUPPORT */ APStop(pAd); APStartUp(pAd); } if (!((pAd->CommonCfg.Channel > 14) && (pAd->CommonCfg.bIEEE80211H == TRUE))) AsicEnableBssSync(pAd); } #endif /* CONFIG_AP_SUPPORT */ return TRUE; }
RTMP_BUILD_DRV_OPS_FUNCTION_BODY #endif /* OS_ABL_FUNC_SUPPORT */ #endif /* LINUX */ int rt28xx_init( IN VOID *pAdSrc, IN PSTRING pDefaultMac, IN PSTRING pHostName) { PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdSrc; UINT index; UCHAR TmpPhy; NDIS_STATUS Status; if (pAd == NULL) return FALSE; #ifdef RT3290 DBGPRINT(RT_DEBUG_OFF, ("MACVersion=0x%x\n", pAd->MACVersion)); if (IS_RT3290(pAd)) { UINT32 MacRegValue; OSCCTL_STRUC osCtrl = {.word = 0}; CMB_CTRL_STRUC cmbCtrl = {.word = 0}; WLAN_FUN_CTRL_STRUC WlanFunCtrl = {.word = 0}; RTMPEnableWlan(pAd, TRUE, TRUE); // // Too much time for reading efuse(enter/exit L1), and our device will hang up // Disable L1 // RTMP_IO_READ32(pAd, WLAN_FUN_CTRL, &WlanFunCtrl.word); if (WlanFunCtrl.field.WLAN_EN == TRUE) { WlanFunCtrl.field.PCIE_APP0_CLK_REQ = TRUE; RTMP_IO_WRITE32(pAd, WLAN_FUN_CTRL, WlanFunCtrl.word); } //Enable ROSC_EN first then CAL_REQ RTMP_IO_READ32(pAd, OSCCTL, &osCtrl.word); osCtrl.field.ROSC_EN = TRUE; //HW force RTMP_IO_WRITE32(pAd, OSCCTL, osCtrl.word); osCtrl.field.ROSC_EN = TRUE; //HW force osCtrl.field.CAL_REQ = TRUE; osCtrl.field.REF_CYCLE = 0x27; RTMP_IO_WRITE32(pAd, OSCCTL, osCtrl.word); RTMP_IO_READ32(pAd, CMB_CTRL, &cmbCtrl.word); pAd->CmbCtrl.word = cmbCtrl.word; // Overwrite default Coex Parameter RTMP_IO_READ32(pAd, COEXCFG0, &MacRegValue); MacRegValue &= ~(0xFF000000); MacRegValue |= 0x5E000000; RTMP_IO_WRITE32(pAd, COEXCFG0, MacRegValue); } if (IS_RT3290LE(pAd)) { PLL_CTRL_STRUC PllCtrl; RTMP_IO_READ32(pAd, PLL_CTRL, &PllCtrl.word); PllCtrl.field.VCO_FIXED_CURRENT_CONTROL = 0x1; RTMP_IO_WRITE32(pAd, PLL_CTRL, PllCtrl.word); } #endif /* RT3290 */ #ifdef CONFIG_STA_SUPPORT #ifdef PCIE_PS_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { /* If dirver doesn't wake up firmware here,*/ /* NICLoadFirmware will hang forever when interface is up again.*/ if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE) && OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) { AUTO_WAKEUP_STRUC AutoWakeupCfg; AsicForceWakeup(pAd, TRUE); AutoWakeupCfg.word = 0; RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word); OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE); } } #endif /* PCIE_PS_SUPPORT */ #endif /* CONFIG_STA_SUPPORT */ /* reset Adapter flags*/ RTMP_CLEAR_FLAGS(pAd); /* Init BssTab & ChannelInfo tabbles for auto channel select.*/ #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) { /*#ifdef AUTO_CH_SELECT_ENHANCE*/ AutoChBssTableInit(pAd); ChannelInfoInit(pAd); /*#endif AUTO_CH_SELECT_ENHANCE */ } #endif /* CONFIG_AP_SUPPORT */ #ifdef DOT11_N_SUPPORT /* Allocate BA Reordering memory*/ if (ba_reordering_resource_init(pAd, MAX_REORDERING_MPDU_NUM) != TRUE) goto err1; #endif /* DOT11_N_SUPPORT */ /* Make sure MAC gets ready.*/ index = 0; if (WaitForAsicReady(pAd) != TRUE) goto err1; DBGPRINT(RT_DEBUG_TRACE, ("MAC[Ver:Rev=0x%08x]\n", pAd->MACVersion)); if (MAX_LEN_OF_MAC_TABLE > MAX_AVAILABLE_CLIENT_WCID(pAd)) { DBGPRINT(RT_DEBUG_ERROR, ("MAX_LEN_OF_MAC_TABLE can not be larger than MAX_AVAILABLE_CLIENT_WCID!!!!\n")); goto err1; } /* Disable DMA*/ RT28XXDMADisable(pAd); /* Load 8051 firmware*/ Status = NICLoadFirmware(pAd); if (Status != NDIS_STATUS_SUCCESS) { DBGPRINT_ERR(("NICLoadFirmware failed, Status[=0x%08x]\n", Status)); goto err1; } NICLoadRateSwitchingParams(pAd); /* Disable interrupts here which is as soon as possible*/ /* This statement should never be true. We might consider to remove it later*/ #ifdef RESOURCE_PRE_ALLOC Status = RTMPInitTxRxRingMemory(pAd); #else Status = RTMPAllocTxRxRingMemory(pAd); #endif /* RESOURCE_PRE_ALLOC */ if (Status != NDIS_STATUS_SUCCESS) { DBGPRINT_ERR(("RTMPAllocTxRxMemory failed, Status[=0x%08x]\n", Status)); goto err2; } RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE); /* initialize MLME*/ Status = RtmpMgmtTaskInit(pAd); if (Status != NDIS_STATUS_SUCCESS) goto err3; Status = MlmeInit(pAd); if (Status != NDIS_STATUS_SUCCESS) { DBGPRINT_ERR(("MlmeInit failed, Status[=0x%08x]\n", Status)); goto err4; } #ifdef RMTP_RBUS_SUPPORT #ifdef VIDEO_TURBINE_SUPPORT VideoConfigInit(pAd); #endif /* VIDEO_TURBINE_SUPPORT */ #endif /* RMTP_RBUS_SUPPORT */ /* Initialize pAd->StaCfg, pAd->ApCfg, pAd->CommonCfg to manufacture default*/ UserCfgInit(pAd); Status = RtmpNetTaskInit(pAd); if (Status != NDIS_STATUS_SUCCESS) goto err5; /* COPY_MAC_ADDR(pAd->ApCfg.MBSSID[apidx].Bssid, netif->hwaddr);*/ /* pAd->bForcePrintTX = TRUE;*/ CfgInitHook(pAd); #ifdef CONFIG_AP_SUPPORT if ((pAd->OpMode == OPMODE_AP) #ifdef P2P_SUPPORT || TRUE #endif /* P2P_SUPPORT */ ) APInitialize(pAd); #endif /* CONFIG_AP_SUPPORT */ #ifdef BLOCK_NET_IF initblockQueueTab(pAd); #endif /* BLOCK_NET_IF */ Status = MeasureReqTabInit(pAd); if (Status != NDIS_STATUS_SUCCESS) { DBGPRINT_ERR(("MeasureReqTabInit failed, Status[=0x%08x]\n",Status)); goto err6; } Status = TpcReqTabInit(pAd); if (Status != NDIS_STATUS_SUCCESS) { DBGPRINT_ERR(("TpcReqTabInit failed, Status[=0x%08x]\n",Status)); goto err6; } /* Init the hardware, we need to init asic before read registry, otherwise mac register will be reset*/ Status = NICInitializeAdapter(pAd, TRUE); if (Status != NDIS_STATUS_SUCCESS) { DBGPRINT_ERR(("NICInitializeAdapter failed, Status[=0x%08x]\n", Status)); if (Status != NDIS_STATUS_SUCCESS) goto err6; } #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) { } #endif /* CONFIG_AP_SUPPORT */ /* Read parameters from Config File */ /* unknown, it will be updated in NICReadEEPROMParameters */ pAd->RfIcType = RFIC_UNKNOWN; Status = RTMPReadParametersHook(pAd); #ifdef CONFIG_STA_SUPPORT #ifdef CREDENTIAL_STORE RecoverConnectInfo(pAd); #endif /* CREDENTIAL_STORE */ #endif /* CONFIG_STA_SUPPORT */ DBGPRINT(RT_DEBUG_OFF, ("1. Phy Mode = %d\n", pAd->CommonCfg.PhyMode)); if (Status != NDIS_STATUS_SUCCESS) { DBGPRINT_ERR(("RTMPReadParametersHook failed, Status[=0x%08x]\n",Status)); goto err6; } #ifdef RTMP_MAC_USB pAd->CommonCfg.bMultipleIRP = FALSE; if (pAd->CommonCfg.bMultipleIRP) pAd->CommonCfg.NumOfBulkInIRP = RX_RING_SIZE; else pAd->CommonCfg.NumOfBulkInIRP = 1; #endif /* RTMP_MAC_USB */ #ifdef DOT11_N_SUPPORT /*Init Ba Capability parameters.*/ /* RT28XX_BA_INIT(pAd);*/ pAd->CommonCfg.DesiredHtPhy.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity; pAd->CommonCfg.DesiredHtPhy.AmsduEnable = (USHORT)pAd->CommonCfg.BACapability.field.AmsduEnable; pAd->CommonCfg.DesiredHtPhy.AmsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize; pAd->CommonCfg.DesiredHtPhy.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode; /* UPdata to HT IE*/ pAd->CommonCfg.HtCapability.HtCapInfo.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode; pAd->CommonCfg.HtCapability.HtCapInfo.AMsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize; pAd->CommonCfg.HtCapability.HtCapParm.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity; #endif /* DOT11_N_SUPPORT */ /* after reading Registry, we now know if in AP mode or STA mode*/ /* Load 8051 firmware; crash when FW image not existent*/ /* Status = NICLoadFirmware(pAd);*/ /* if (Status != NDIS_STATUS_SUCCESS)*/ /* break;*/ DBGPRINT(RT_DEBUG_OFF, ("2. Phy Mode = %d\n", pAd->CommonCfg.PhyMode)); /* We should read EEPROM for all cases. rt2860b*/ NICReadEEPROMParameters(pAd, (PSTRING)pDefaultMac); #ifdef CONFIG_STA_SUPPORT #endif /* CONFIG_STA_SUPPORT */ DBGPRINT(RT_DEBUG_OFF, ("3. Phy Mode = %d\n", pAd->CommonCfg.PhyMode)); #ifdef LED_CONTROL_SUPPORT /* Send LED Setting to MCU */ RTMPInitLEDMode(pAd); #endif /* LED_CONTROL_SUPPORT */ NICInitAsicFromEEPROM(pAd); /* rt2860b */ #ifdef RALINK_ATE if (ATEInit(pAd) != NDIS_STATUS_SUCCESS) { DBGPRINT(RT_DEBUG_ERROR, ("%s(): ATE initialization failed !\n", __FUNCTION__)); goto err6; } #endif /* RALINK_ATE */ #ifdef RTMP_FREQ_CALIBRATION_SUPPORT #ifdef CONFIG_STA_SUPPORT /* Initialize the frequency calibration*/ if (pAd->chipCap.FreqCalibrationSupport) FrequencyCalibration(pAd); #endif /* CONFIG_STA_SUPPORT */ #endif /* RTMP_FREQ_CALIBRATION_SUPPORT */ #ifdef RTMP_INTERNAL_TX_ALC /* Initialize the desired TSSI table*/ RTMP_CHIP_ASIC_TSSI_TABLE_INIT(pAd); #endif /* RTMP_INTERNAL_TX_ALC */ #ifdef RTMP_TEMPERATURE_COMPENSATION /* Temperature compensation, initialize the lookup table */ DBGPRINT(RT_DEBUG_OFF, ("bAutoTxAgcG = %d\n", pAd->bAutoTxAgcG)); if (pAd->chipCap.bTempCompTxALC && pAd->bAutoTxAgcG) InitLookupTable(pAd); #endif /* RTMP_TEMPERATURE_COMPENSATION */ #ifdef RTMP_FREQ_CALIBRATION_SUPPORT #ifdef CONFIG_STA_SUPPORT if (pAd->chipCap.FreqCalibrationSupport) InitFrequencyCalibration(pAd); #endif /* CONFIG_STA_SUPPORT */ #endif /* RTMP_FREQ_CALIBRATION_SUPPORT */ /* Set PHY to appropriate mode*/ TmpPhy = pAd->CommonCfg.PhyMode; pAd->CommonCfg.PhyMode = 0xff; RTMPSetPhyMode(pAd, TmpPhy); #ifdef DOT11_N_SUPPORT SetCommonHT(pAd); #endif /* DOT11_N_SUPPORT */ /* No valid channels.*/ if (pAd->ChannelListNum == 0) { DBGPRINT(RT_DEBUG_ERROR, ("Wrong configuration. No valid channel found. Check \"ContryCode\" and \"ChannelGeography\" setting.\n")); goto err6; } #ifdef DOT11_N_SUPPORT DBGPRINT(RT_DEBUG_OFF, ("MCS Set = %02x %02x %02x %02x %02x\n", pAd->CommonCfg.HtCapability.MCSSet[0], pAd->CommonCfg.HtCapability.MCSSet[1], pAd->CommonCfg.HtCapability.MCSSet[2], pAd->CommonCfg.HtCapability.MCSSet[3], pAd->CommonCfg.HtCapability.MCSSet[4])); #endif /* DOT11_N_SUPPORT */ #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) { #ifdef AP_QLOAD_SUPPORT /* init QBSS Element */ QBSS_LoadInit(pAd); #endif /* AP_QLOAD_SUPPORT */ } #endif /* CONFIG_AP_SUPPORT */ /* APInitialize(pAd);*/ #ifdef IKANOS_VX_1X0 VR_IKANOS_FP_Init(pAd->ApCfg.BssidNum, pAd->PermanentAddress); #endif /* IKANOS_VX_1X0 */ #ifdef RTMP_MAC_USB AsicSendCommandToMcu(pAd, 0x31, 0xff, 0x00, 0x02, FALSE); RTMPusecDelay(10000); #endif /* RTMP_MAC_USB */ #ifdef RALINK_ATE #ifdef RT5592 #ifdef RTMP_RF_RW_SUPPORT /* both for RT5572 and RT5592 */ if (IS_RT5592(pAd)) { RT55x2ATEFilterCalibration(pAd); } #endif /* RTMP_RF_RW_SUPPORT */ #endif /* RT5592 */ #endif /* RALINK_ATE */ #ifdef CONFIG_AP_SUPPORT /* Initialize RF register to default value*/ if (pAd->OpMode == OPMODE_AP) { AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE); AsicLockChannel(pAd, pAd->CommonCfg.Channel); } #endif /* CONFIG_AP_SUPPORT */ /* Some modules init must be called before APStartUp(). Or APStartUp() will make up beacon content and call other modules API to get some information to fill. */ #ifdef CONFIG_TSO_SUPPORT if (RTMP_TEST_MORE_FLAG(pAd, fRTMP_ADAPTER_TSO_SUPPORT)) RTMPTsoEnable(pAd); #endif /* CONFIG_TSO_SUPPORT */ if (pAd && (Status != NDIS_STATUS_SUCCESS)) { /* Undo everything if it failed*/ if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE)) { /* NdisMDeregisterInterrupt(&pAd->Interrupt);*/ RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE); } /* RTMPFreeAdapter(pAd); we will free it in disconnect()*/ } else if (pAd) { /* Microsoft HCT require driver send a disconnect event after driver initialization.*/ OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED); OPSTATUS_CLEAR_FLAG(pAd, fOP_AP_STATUS_MEDIA_STATE_CONNECTED); RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_MEDIA_STATE_CHANGE); DBGPRINT(RT_DEBUG_TRACE, ("NDIS_STATUS_MEDIA_DISCONNECT Event B!\n")); #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) { if (pAd->ApCfg.bAutoChannelAtBootup || (pAd->CommonCfg.Channel == 0)) { UINT8 BBPValue = 0; /* Enable Interrupt first due to we need to scan channel to receive beacons.*/ RTMP_IRQ_ENABLE(pAd); #ifdef RTMP_MAC_USB RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS); RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_REMOVE_IN_PROGRESS); /* Support multiple BulkIn IRP,*/ /* the value on pAd->CommonCfg.NumOfBulkInIRP may be large than 1.*/ for(index=0; index<pAd->CommonCfg.NumOfBulkInIRP; index++) { RTUSBBulkReceive(pAd); DBGPRINT(RT_DEBUG_TRACE, ("RTUSBBulkReceive!\n" )); } #endif /* RTMP_MAC_USB */ /* Now Enable RxTx*/ RTMPEnableRxTx(pAd); RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_START_UP); /* Let BBP register at 20MHz to do scan */ RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue); BBPValue &= (~0x18); RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue); DBGPRINT(RT_DEBUG_ERROR, ("SYNC - BBP R4 to 20MHz.l\n")); /* Now we can receive the beacon and do the listen beacon*/ /* use default BW to select channel*/ pAd->CommonCfg.Channel = AP_AUTO_CH_SEL(pAd, pAd->ApCfg.AutoChannelAlg); pAd->ApCfg.bAutoChannelAtBootup = FALSE; } #ifdef DOT11_N_SUPPORT /* If phymode > PHY_11ABGN_MIXED and BW=40 check extension channel, after select channel */ N_ChannelCheck(pAd); #ifdef DOT11N_DRAFT3 /* We only do this Overlapping BSS Scan when system up, for the other situation of channel changing, we depends on station's report to adjust ourself. */ if (pAd->CommonCfg.bForty_Mhz_Intolerant == TRUE) { DBGPRINT(RT_DEBUG_TRACE, ("Disable 20/40 BSSCoex Channel Scan(BssCoex=%d, 40MHzIntolerant=%d)\n", pAd->CommonCfg.bBssCoexEnable, pAd->CommonCfg.bForty_Mhz_Intolerant)); } else if(pAd->CommonCfg.bBssCoexEnable == TRUE) { DBGPRINT(RT_DEBUG_TRACE, ("Enable 20/40 BSSCoex Channel Scan(BssCoex=%d)\n", pAd->CommonCfg.bBssCoexEnable)); APOverlappingBSSScan(pAd); } RTMP_11N_D3_TimerInit(pAd); /* RTMPInitTimer(pAd, &pAd->CommonCfg.Bss2040CoexistTimer, GET_TIMER_FUNCTION(Bss2040CoexistTimeOut), pAd, FALSE);*/ #endif /* DOT11N_DRAFT3 */ #endif /* DOT11_N_SUPPORT */ APStartUp(pAd); DBGPRINT(RT_DEBUG_OFF, ("Main bssid = %02x:%02x:%02x:%02x:%02x:%02x\n", PRINT_MAC(pAd->ApCfg.MBSSID[BSS0].Bssid))); } #endif /* CONFIG_AP_SUPPORT */ #ifdef RTMP_MAC_USB RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS); RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_REMOVE_IN_PROGRESS); /* Support multiple BulkIn IRP,*/ /* the value on pAd->CommonCfg.NumOfBulkInIRP may be large than 1.*/ for(index=0; index<pAd->CommonCfg.NumOfBulkInIRP; index++) { RTUSBBulkReceive(pAd); DBGPRINT(RT_DEBUG_TRACE, ("RTUSBBulkReceive!\n" )); } #endif /* RTMP_MAC_USB */ }/* end of else*/ /* Set up the Mac address*/ #ifdef CONFIG_AP_SUPPORT #ifndef P2P_APCLI_SUPPORT RtmpOSNetDevAddrSet(pAd->OpMode, pAd->net_dev, &pAd->CurrentAddress[0], NULL); #endif /* P2P_APCLI_SUPPORT */ #endif /* CONFIG_AP_SUPPORT */ #ifdef CONFIG_STA_SUPPORT RtmpOSNetDevAddrSet(pAd->OpMode, pAd->net_dev, &pAd->CurrentAddress[0], (PUCHAR)(pAd->StaCfg.dev_name)); #endif /* CONFIG_STA_SUPPORT */ /* Various AP function init*/ #ifdef CONFIG_AP_SUPPORT #ifdef P2P_SUPPORT #else IF_DEV_CONFIG_OPMODE_ON_AP(pAd) #endif /* P2P_SUPPORT */ { #ifdef MBSS_SUPPORT /* the function can not be moved to RT2860_probe() even register_netdev() is changed as register_netdevice(). Or in some PC, kernel will panic (Fedora 4) */ /* RT28xx_MBSS_Init(pAd, pAd->net_dev); os abl move to rt_main_dev.c*/ #endif /* MBSS_SUPPORT */ #ifdef APCLI_SUPPORT /* RT28xx_ApCli_Init(pAd, pAd->net_dev);*/ #endif /* APCLI_SUPPORT */ } #endif /* CONFIG_AP_SUPPORT */ #ifdef UAPSD_SUPPORT UAPSD_Init(pAd); #endif /* UAPSD_SUPPORT */ /* assign function pointers*/ #ifdef MAT_SUPPORT /* init function pointers, used in OS_ABL */ RTMP_MATOpsInit(pAd); #endif /* MAT_SUPPORT */ #ifdef P2P_SUPPORT /* RTMP_P2P_Init(pAd, pAd->net_dev); */ #endif /* P2P_SUPPORT */ #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) { #ifdef MAT_SUPPORT MATEngineInit(pAd); #endif /* MAT_SUPPORT */ #ifdef CLIENT_WDS CliWds_ProxyTabInit(pAd); #endif /* CLIENT_WDS */ } #endif /* CONFIG_AP_SUPPORT */ #ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { #ifdef DOT11Z_TDLS_SUPPORT TDLS_Table_Init(pAd); #endif /* DOT11Z_TDLS_SUPPORT */ #ifdef WPA_SUPPLICANT_SUPPORT #ifndef NATIVE_WPA_SUPPLICANT_SUPPORT /* send wireless event to wpa_supplicant for infroming interface up.*/ RtmpOSWrielessEventSend(pAd->net_dev, RT_WLAN_EVENT_CUSTOM, RT_INTERFACE_UP, NULL, NULL, 0); #endif /* NATIVE_WPA_SUPPLICANT_SUPPORT */ #endif /* WPA_SUPPLICANT_SUPPORT */ } #endif /* CONFIG_STA_SUPPORT */ /* auto-fall back settings */ #ifdef RANGE_EXTEND RTMP_IO_WRITE32(pAd, HT_FBK_CFG1, 0xedcba980); #endif // RANGE_EXTEND // #ifdef DOT11N_SS3_SUPPORT if (pAd->CommonCfg.TxStream >= 3) { RTMP_IO_WRITE32(pAd, TX_FBK_CFG_3S_0, 0x12111008); RTMP_IO_WRITE32(pAd, TX_FBK_CFG_3S_1, 0x16151413); } #endif /* DOT11N_SS3_SUPPORT */ #ifdef STREAM_MODE_SUPPORT RtmpStreamModeInit(pAd); #endif /* STREAM_MODE_SUPPORT */ #ifdef DOT11_N_SUPPORT #endif /* DOT11_N_SUPPORT */ #ifdef RT3290 if (IS_RT3290(pAd)) { WLAN_FUN_CTRL_STRUC WlanFunCtrl = {.word = 0}; RTMP_MAC_PWRSV_EN(pAd, TRUE, TRUE); // // Too much time for reading efuse(enter/exit L1), and our device will hang up // Enable L1 // RTMP_IO_READ32(pAd, WLAN_FUN_CTRL, &WlanFunCtrl.word); if (WlanFunCtrl.field.WLAN_EN == TRUE) { WlanFunCtrl.field.PCIE_APP0_CLK_REQ = FALSE; RTMP_IO_WRITE32(pAd, WLAN_FUN_CTRL, WlanFunCtrl.word); } } #endif /* RT3290 */ DBGPRINT_S(Status, ("<==== rt28xx_init, Status=%x\n", Status)); return TRUE; /*err7: APStop(pAd);*/ err6: #ifdef IGMP_SNOOP_SUPPORT MultiCastFilterTableReset(&pAd->pMulticastFilterTable); #endif /* IGMP_SNOOP_SUPPORT */ MeasureReqTabExit(pAd); TpcReqTabExit(pAd); err5: RtmpNetTaskExit(pAd); UserCfgExit(pAd); err4: MlmeHalt(pAd); RTMP_TimerListRelease(pAd); err3: RtmpMgmtTaskExit(pAd); #ifdef RTMP_TIMER_TASK_SUPPORT NdisFreeSpinLock(&pAd->TimerQLock); #endif /* RTMP_TIMER_TASK_SUPPORT */ err2: #ifdef RESOURCE_PRE_ALLOC RTMPResetTxRxRingMemory(pAd); #else RTMPFreeTxRxRingMemory(pAd); #endif /* RESOURCE_PRE_ALLOC */ err1: #ifdef CONFIG_AP_SUPPORT /* Free BssTab & ChannelInfo tabbles.*/ AutoChBssTableDestroy(pAd); ChannelInfoDestroy(pAd); #endif /* CONFIG_AP_SUPPORT */ #ifdef RT3290 if (IS_RT3290(pAd)) RTMPEnableWlan(pAd, FALSE, FALSE); #endif /* RT3290 */ #ifdef DOT11_N_SUPPORT if(pAd->mpdu_blk_pool.mem) os_free_mem(pAd, pAd->mpdu_blk_pool.mem); /* free BA pool*/ #endif /* DOT11_N_SUPPORT */ /* shall not set priv to NULL here because the priv didn't been free yet.*/ /*net_dev->priv = 0;*/ #ifdef INF_AMAZON_SE err0: #endif /* INF_AMAZON_SE */ #ifdef ST err0: #endif /* ST */ DBGPRINT(RT_DEBUG_ERROR, ("!!! rt28xx Initialized fail !!!\n")); return FALSE; } VOID RTMPDrvOpen( IN VOID *pAdSrc) { PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdSrc; #ifdef CONFIG_STA_SUPPORT #endif /* CONFIG_STA_SUPPORT */ /* Enable Interrupt*/ RTMP_IRQ_ENABLE(pAd); /* Now Enable RxTx*/ RTMPEnableRxTx(pAd); RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_START_UP); { UINT32 reg = 0; RTMP_IO_READ32(pAd, 0x1300, ®); /* clear garbage interrupts*/ printk("0x1300 = %08x\n", reg); } { /* u32 reg;*/ /* UINT8 byte;*/ /* u16 tmp;*/ /* RTMP_IO_READ32(pAd, XIFS_TIME_CFG, ®);*/ /* tmp = 0x0805;*/ /* reg = (reg & 0xffff0000) | tmp;*/ /* RTMP_IO_WRITE32(pAd, XIFS_TIME_CFG, reg);*/ } #ifdef CONFIG_STA_SUPPORT #ifdef PCIE_PS_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) RTMPInitPCIeLinkCtrlValue(pAd); #endif /* PCIE_PS_SUPPORT */ #endif /* CONFIG_STA_SUPPORT */ #ifdef CONFIG_AP_SUPPORT #ifdef BG_FT_SUPPORT BG_FTPH_Init(); #endif /* BG_FT_SUPPORT */ #endif /* CONFIG_AP_SUPPORT */ #ifdef CONFIG_STA_SUPPORT /* To reduce connection time, do auto reconnect here instead of waiting STAMlmePeriodicExec to do auto reconnect. */ if (pAd->OpMode == OPMODE_STA) MlmeAutoReconnectLastSSID(pAd); #endif /* CONFIG_STA_SUPPORT */ #ifdef CONFIG_STA_SUPPORT #endif /* CONFIG_STA_SUPPORT */ #ifdef WSC_INCLUDED #ifdef CONFIG_AP_SUPPORT if ((pAd->OpMode == OPMODE_AP) #ifdef P2P_SUPPORT /* P2P will use ApCfg.MBSSID and ApCfg.ApCliTab also. */ || TRUE #endif /* P2P_SUPPORT */ ) { int index; for (index = 0; index < pAd->ApCfg.BssidNum; index++) { #ifdef HOSTAPD_SUPPORT if (pAd->ApCfg.MBSSID[index].Hostapd == TRUE) { DBGPRINT(RT_DEBUG_TRACE, ("WPS is control by hostapd now.\n")); } else #endif /*HOSTAPD_SUPPORT*/ { PWSC_CTRL pWscControl; UCHAR zeros16[16]= {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0}; pWscControl = &pAd->ApCfg.MBSSID[index].WscControl; DBGPRINT(RT_DEBUG_TRACE, ("Generate UUID for apidx(%d)\n", index)); if (NdisEqualMemory(&pWscControl->Wsc_Uuid_E[0], zeros16, UUID_LEN_HEX)) WscGenerateUUID(pAd, &pWscControl->Wsc_Uuid_E[0], &pWscControl->Wsc_Uuid_Str[0], index, FALSE); WscInit(pAd, FALSE, index); } } #ifdef APCLI_SUPPORT for(index = 0; index < MAX_APCLI_NUM; index++) { PWSC_CTRL pWpsCtrl = &pAd->ApCfg.ApCliTab[index].WscControl; pWpsCtrl->pAd = pAd; NdisZeroMemory(pWpsCtrl->EntryAddr, MAC_ADDR_LEN); pWpsCtrl->WscConfigMethods= 0x018C; RTMP_AP_IoctlHandle(pAd, NULL, CMD_RTPRIV_IOCTL_WSC_INIT, 0, (VOID *)&pAd->ApCfg.ApCliTab[index], index); } #endif /* APCLI_SUPPORT */ } #endif /* CONFIG_AP_SUPPORT */ #ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { PWSC_CTRL pWscControl = &pAd->StaCfg.WscControl; WscGenerateUUID(pAd, &pWscControl->Wsc_Uuid_E[0], &pWscControl->Wsc_Uuid_Str[0], 0, FALSE); WscInit(pAd, FALSE, BSS0); #ifdef WSC_V2_SUPPORT WscInitRegistrarPair(pAd, &pAd->StaCfg.WscControl, BSS0); #endif /* WSC_V2_SUPPORT */ } #endif /* CONFIG_STA_SUPPORT */ /* WSC hardware push button function 0811 */ WSC_HDR_BTN_Init(pAd); #endif /* WSC_INCLUDED */ } VOID RTMPDrvClose( IN VOID *pAdSrc, IN VOID *net_dev) { PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdSrc; BOOLEAN Cancelled; UINT32 i = 0; Cancelled = FALSE; #ifdef CONFIG_STA_SUPPORT #ifdef CREDENTIAL_STORE if (pAd->IndicateMediaState == NdisMediaStateConnected) { StoreConnectInfo(pAd); } else { RTMP_SEM_LOCK(&pAd->StaCtIf.Lock); pAd->StaCtIf.Changeable = FALSE; RTMP_SEM_UNLOCK(&pAd->StaCtIf.Lock); } #endif /* CREDENTIAL_STORE */ #endif /* CONFIG_STA_SUPPORT */ #ifdef CONFIG_AP_SUPPORT #ifdef BG_FT_SUPPORT BG_FTPH_Remove(); #endif /* BG_FT_SUPPORT */ #endif /* CONFIG_AP_SUPPORT */ #ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { #ifdef PCIE_PS_SUPPORT RTMPPCIeLinkCtrlValueRestore(pAd, RESTORE_CLOSE); #endif /* PCIE_PS_SUPPORT */ /* If dirver doesn't wake up firmware here,*/ /* NICLoadFirmware will hang forever when interface is up again.*/ if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) { AsicForceWakeup(pAd, TRUE); } #ifdef RTMP_MAC_USB RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_REMOVE_IN_PROGRESS); #endif /* RTMP_MAC_USB */ } #endif /* CONFIG_STA_SUPPORT */ RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS); #ifdef EXT_BUILD_CHANNEL_LIST if (pAd->CommonCfg.pChDesp != NULL) os_free_mem(NULL, pAd->CommonCfg.pChDesp); pAd->CommonCfg.pChDesp = NULL; pAd->CommonCfg.DfsType = MAX_RD_REGION; pAd->CommonCfg.bCountryFlag = 0; #endif /* EXT_BUILD_CHANNEL_LIST */ for (i = 0 ; i < NUM_OF_TX_RING; i++) { while (pAd->DeQueueRunning[i] == TRUE) { DBGPRINT(RT_DEBUG_TRACE, ("Waiting for TxQueue[%d] done..........\n", i)); RTMPusecDelay(1000); } } #ifdef RTMP_MAC_USB RtmpOsUsbEmptyUrbCheck(&pAd->wait, &pAd->BulkInLock, &pAd->PendingRx); #endif /* RTMP_MAC_USB */ #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) { #ifdef RTMP_MAC_USB RTMPCancelTimer(&pAd->CommonCfg.BeaconUpdateTimer, &Cancelled); #endif /* RTMP_MAC_USB */ #ifdef DOT11N_DRAFT3 if (pAd->CommonCfg.Bss2040CoexistFlag & BSS_2040_COEXIST_TIMER_FIRED) { RTMPCancelTimer(&pAd->CommonCfg.Bss2040CoexistTimer, &Cancelled); pAd->CommonCfg.Bss2040CoexistFlag = 0; } #endif /* DOT11N_DRAFT3 */ /* PeriodicTimer already been canceled by MlmeHalt() API.*/ /*RTMPCancelTimer(&pAd->PeriodicTimer, &Cancelled);*/ } #endif /* CONFIG_AP_SUPPORT */ /* Stop Mlme state machine*/ MlmeHalt(pAd); /* Close net tasklets*/ RtmpNetTaskExit(pAd); #ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { MacTableReset(pAd); #ifdef MAT_SUPPORT MATEngineExit(pAd); #endif /* MAT_SUPPORT */ #if defined(WOW_SUPPORT) && defined(RTMP_MAC_USB) && defined(WOW_IFDOWN_SUPPORT) if (pAd->WOW_Cfg.bEnable == TRUE) RT28xxUsbAsicWOWEnable(pAd); else #endif /* WOW_SUPPORT */ MlmeRadioOff(pAd); } #endif /* CONFIG_STA_SUPPORT */ #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) { #ifdef MAT_SUPPORT MATEngineExit(pAd); #endif /* MAT_SUPPORT */ #ifdef CLIENT_WDS CliWds_ProxyTabDestory(pAd); #endif /* CLIENT_WDS */ /* Shutdown Access Point function, release all related resources */ APShutdown(pAd); /*#ifdef AUTO_CH_SELECT_ENHANCE*/ /* Free BssTab & ChannelInfo tabbles.*/ /* AutoChBssTableDestroy(pAd); */ /* ChannelInfoDestroy(pAd); */ /*#endif AUTO_CH_SELECT_ENHANCE */ } #endif /* CONFIG_AP_SUPPORT */ MeasureReqTabExit(pAd); TpcReqTabExit(pAd); #ifdef LED_CONTROL_SUPPORT RTMPExitLEDMode(pAd); #endif // LED_CONTROL_SUPPORT /* Close kernel threads*/ RtmpMgmtTaskExit(pAd); #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) { /* must after RtmpMgmtTaskExit(); Or pAd->pChannelInfo will be NULL */ /* Free BssTab & ChannelInfo tabbles.*/ AutoChBssTableDestroy(pAd); ChannelInfoDestroy(pAd); } #endif /* CONFIG_AP_SUPPORT */ /* Free IRQ*/ if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE)) { RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE); } /* Free Ring or USB buffers*/ #ifdef RESOURCE_PRE_ALLOC RTMPResetTxRxRingMemory(pAd); #else /* Free Ring or USB buffers*/ RTMPFreeTxRxRingMemory(pAd); #endif /* RESOURCE_PRE_ALLOC */ RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS); #ifdef DOT11_N_SUPPORT /* Free BA reorder resource*/ ba_reordering_resource_release(pAd); #endif /* DOT11_N_SUPPORT */ UserCfgExit(pAd); /* must after ba_reordering_resource_release */ #ifdef CONFIG_STA_SUPPORT #endif /* CONFIG_STA_SUPPORT */ RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_START_UP); /*+++Modify by woody to solve the bulk fail+++*/ #ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { #ifdef RT35xx if (IS_RT3572(pAd)) { RT30xxWriteRFRegister(pAd, RF_R08, 0x00); AsicSendCommandToMcu(pAd, 0x30, 0xff, 0xff, 0x02, FALSE); } #endif /* RT35xx */ #ifdef DOT11Z_TDLS_SUPPORT TDLS_Table_Destory(pAd); #ifdef TDLS_AUTOLINK_SUPPORT TDLS_ClearEntryList(&pAd->StaCfg.TdlsInfo.TdlsDiscovPeerList); NdisFreeSpinLock(&pAd->StaCfg.TdlsInfo.TdlsDiscovPeerListSemLock); TDLS_ClearEntryList(&pAd->StaCfg.TdlsInfo.TdlsBlackList); NdisFreeSpinLock(&pAd->StaCfg.TdlsInfo.TdlsBlackListSemLock); #endif /* TDLS_AUTOLINK_SUPPORT */ #endif /* DOT11Z_TDLS_SUPPORT */ } #endif /* CONFIG_STA_SUPPORT */ /* clear MAC table */ /* TODO: do not clear spin lock, such as fLastChangeAccordingMfbLock */ NdisZeroMemory(&pAd->MacTab, sizeof(MAC_TABLE)); /* release all timers */ RTMPusecDelay(2000); RTMP_TimerListRelease(pAd); #ifdef RTMP_TIMER_TASK_SUPPORT NdisFreeSpinLock(&pAd->TimerQLock); #endif /* RTMP_TIMER_TASK_SUPPORT */ } VOID RTMPInfClose( IN VOID *pAdSrc) { PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdSrc; #ifdef CONFIG_AP_SUPPORT pAd->ApCfg.MBSSID[MAIN_MBSSID].bBcnSntReq = FALSE; IF_DEV_CONFIG_OPMODE_ON_AP(pAd) { /* kick out all STAs behind the bss.*/ MbssKickOutStas(pAd, MAIN_MBSSID, REASON_DISASSOC_INACTIVE); } #ifdef RT_CFG80211_SUPPORT #else APMakeAllBssBeacon(pAd); APUpdateAllBeaconFrame(pAd); #endif /* RT_CFG80211_SUPPORT */ #endif /* CONFIG_AP_SUPPORT */ #ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { #ifdef PROFILE_STORE WriteDatThread(pAd); RTMPusecDelay(1000); #endif /* PROFILE_STORE */ #ifdef QOS_DLS_SUPPORT /* send DLS-TEAR_DOWN message, */ if (pAd->CommonCfg.bDLSCapable) { UCHAR i; /* tear down local dls table entry*/ for (i=0; i<MAX_NUM_OF_INIT_DLS_ENTRY; i++) { if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH)) { RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr); pAd->StaCfg.DLSEntry[i].Status = DLS_NONE; pAd->StaCfg.DLSEntry[i].Valid = FALSE; } } /* tear down peer dls table entry*/ for (i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++) { if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH)) { RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr); pAd->StaCfg.DLSEntry[i].Status = DLS_NONE; pAd->StaCfg.DLSEntry[i].Valid = FALSE; } } RTMP_MLME_HANDLER(pAd); } #endif /* QOS_DLS_SUPPORT */ if (INFRA_ON(pAd) && #if defined(WOW_SUPPORT) && defined(RTMP_MAC_USB) && defined(WOW_IFDOWN_SUPPORT) /* In WOW state, can't issue disassociation reqeust */ pAd->WOW_Cfg.bEnable == FALSE && #endif /* WOW_SUPPORT */ (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))) { MLME_DISASSOC_REQ_STRUCT DisReq; MLME_QUEUE_ELEM *MsgElem;/* = (MLME_QUEUE_ELEM *) kmalloc(sizeof(MLME_QUEUE_ELEM), MEM_ALLOC_FLAG);*/ os_alloc_mem(NULL, (UCHAR **)&MsgElem, sizeof(MLME_QUEUE_ELEM)); if (MsgElem) { COPY_MAC_ADDR(DisReq.Addr, pAd->CommonCfg.Bssid); DisReq.Reason = REASON_DEAUTH_STA_LEAVING; MsgElem->Machine = ASSOC_STATE_MACHINE; MsgElem->MsgType = MT2_MLME_DISASSOC_REQ; MsgElem->MsgLen = sizeof(MLME_DISASSOC_REQ_STRUCT); NdisMoveMemory(MsgElem->Msg, &DisReq, sizeof(MLME_DISASSOC_REQ_STRUCT)); /* Prevent to connect AP again in STAMlmePeriodicExec*/ pAd->MlmeAux.AutoReconnectSsidLen= 32; NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen); pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC; MlmeDisassocReqAction(pAd, MsgElem); /* kfree(MsgElem);*/ os_free_mem(NULL, MsgElem); } RTMPusecDelay(1000); } #ifdef WPA_SUPPLICANT_SUPPORT #ifndef NATIVE_WPA_SUPPLICANT_SUPPORT /* send wireless event to wpa_supplicant for infroming interface down.*/ RtmpOSWrielessEventSend(pAd->net_dev, RT_WLAN_EVENT_CUSTOM, RT_INTERFACE_DOWN, NULL, NULL, 0); #endif /* NATIVE_WPA_SUPPLICANT_SUPPORT */ if (pAd->StaCfg.pWpsProbeReqIe) { /* kfree(pAd->StaCfg.pWpsProbeReqIe);*/ os_free_mem(NULL, pAd->StaCfg.pWpsProbeReqIe); pAd->StaCfg.pWpsProbeReqIe = NULL; pAd->StaCfg.WpsProbeReqIeLen = 0; } if (pAd->StaCfg.pWpaAssocIe) { /* kfree(pAd->StaCfg.pWpaAssocIe);*/ os_free_mem(NULL, pAd->StaCfg.pWpaAssocIe); pAd->StaCfg.pWpaAssocIe = NULL; pAd->StaCfg.WpaAssocIeLen = 0; } #endif /* WPA_SUPPLICANT_SUPPORT */ } #endif /* CONFIG_STA_SUPPORT */ } PNET_DEV RtmpPhyNetDevMainCreate( IN VOID *pAdSrc) { PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdSrc; PNET_DEV pDevNew; UINT32 MC_RowID = 0, IoctlIF = 0; pAd = pAd; #ifdef MULTIPLE_CARD_SUPPORT MC_RowID = pAd->MC_RowID; #endif /* MULTIPLE_CARD_SUPPORT */ #ifdef HOSTAPD_SUPPORT IoctlIF = pAd->IoctlIF; #endif /* HOSTAPD_SUPPORT */ pDevNew = RtmpOSNetDevCreate((INT32)MC_RowID, (UINT32 *)&IoctlIF, INT_MAIN, 0, sizeof(PRTMP_ADAPTER), INF_MAIN_DEV_NAME); #ifdef HOSTAPD_SUPPORT pAd->IoctlIF = IoctlIF; #endif /* HOSTAPD_SUPPORT */ return pDevNew; }
RTMP_BUILD_DRV_OPS_FUNCTION_BODY #endif /* OS_ABL_FUNC_SUPPORT */ #endif /* LINUX */ int rt28xx_init( IN VOID *pAdSrc, IN PSTRING pDefaultMac, IN PSTRING pHostName) { PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdSrc; UINT index; UCHAR TmpPhy; NDIS_STATUS Status; UINT32 MacCsr0 = 0; if (pAd == NULL) return FALSE; #ifdef CONFIG_STA_SUPPORT #ifdef PCIE_PS_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { /* If dirver doesn't wake up firmware here,*/ /* NICLoadFirmware will hang forever when interface is up again.*/ if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE) && OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) { AUTO_WAKEUP_STRUC AutoWakeupCfg; AsicForceWakeup(pAd, TRUE); AutoWakeupCfg.word = 0; RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word); OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE); } } #endif /* PCIE_PS_SUPPORT */ #endif /* CONFIG_STA_SUPPORT */ /* reset Adapter flags*/ RTMP_CLEAR_FLAGS(pAd); /* Init BssTab & ChannelInfo tabbles for auto channel select.*/ #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) { /*#ifdef AUTO_CH_SELECT_ENHANCE*/ AutoChBssTableInit(pAd); ChannelInfoInit(pAd); /*#endif AUTO_CH_SELECT_ENHANCE */ } #endif /* CONFIG_AP_SUPPORT */ #ifdef DOT11_N_SUPPORT /* Allocate BA Reordering memory*/ if (ba_reordering_resource_init(pAd, MAX_REORDERING_MPDU_NUM) != TRUE) goto err1; #endif /* DOT11_N_SUPPORT */ /* Make sure MAC gets ready.*/ index = 0; do { RTMP_IO_READ32(pAd, MAC_CSR0, &MacCsr0); pAd->MACVersion = MacCsr0; if ((pAd->MACVersion != 0x00) && (pAd->MACVersion != 0xFFFFFFFF)) break; if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)) goto err1; RTMPusecDelay(10); } while (index++ < 100); DBGPRINT(RT_DEBUG_TRACE, ("MAC_CSR0 [ Ver:Rev=0x%08x]\n", pAd->MACVersion)); RtmpChipOpsHook(pAd); if (MAX_LEN_OF_MAC_TABLE > MAX_AVAILABLE_CLIENT_WCID(pAd)) { DBGPRINT(RT_DEBUG_ERROR, ("MAX_LEN_OF_MAC_TABLE can not be larger than MAX_AVAILABLE_CLIENT_WCID!!!!\n")); goto err1; } #ifdef RTMP_MAC_PCI /* To fix driver disable/enable hang issue when radio off*/ RTMP_IO_WRITE32(pAd, PWR_PIN_CFG, 0x2); #endif /* RTMP_MAC_PCI */ /* Disable DMA*/ RT28XXDMADisable(pAd); /* Load 8051 firmware*/ Status = NICLoadFirmware(pAd); if (Status != NDIS_STATUS_SUCCESS) { DBGPRINT_ERR(("NICLoadFirmware failed, Status[=0x%08x]\n", Status)); goto err1; } NICLoadRateSwitchingParams(pAd); /* Disable interrupts here which is as soon as possible*/ /* This statement should never be true. We might consider to remove it later*/ #ifdef RTMP_MAC_PCI if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_ACTIVE)) { RTMP_ASIC_INTERRUPT_DISABLE(pAd); } #endif /* RTMP_MAC_PCI */ #ifdef RESOURCE_PRE_ALLOC Status = RTMPInitTxRxRingMemory(pAd); #else Status = RTMPAllocTxRxRingMemory(pAd); #endif /* RESOURCE_PRE_ALLOC */ if (Status != NDIS_STATUS_SUCCESS) { DBGPRINT_ERR(("RTMPAllocTxRxMemory failed, Status[=0x%08x]\n", Status)); goto err2; } RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE); /* initialize MLME*/ Status = RtmpMgmtTaskInit(pAd); if (Status != NDIS_STATUS_SUCCESS) goto err3; Status = MlmeInit(pAd); if (Status != NDIS_STATUS_SUCCESS) { DBGPRINT_ERR(("MlmeInit failed, Status[=0x%08x]\n", Status)); goto err4; } #ifdef RMTP_RBUS_SUPPORT #ifdef VIDEO_TURBINE_SUPPORT VideoConfigInit(pAd); #endif /* VIDEO_TURBINE_SUPPORT */ #endif /* RMTP_RBUS_SUPPORT */ /* Initialize pAd->StaCfg, pAd->ApCfg, pAd->CommonCfg to manufacture default*/ UserCfgInit(pAd); Status = RtmpNetTaskInit(pAd); if (Status != NDIS_STATUS_SUCCESS) goto err5; /* COPY_MAC_ADDR(pAd->ApCfg.MBSSID[apidx].Bssid, netif->hwaddr);*/ /* pAd->bForcePrintTX = TRUE;*/ CfgInitHook(pAd); #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) APInitialize(pAd); #endif /* CONFIG_AP_SUPPORT */ #ifdef BLOCK_NET_IF initblockQueueTab(pAd); #endif /* BLOCK_NET_IF */ Status = MeasureReqTabInit(pAd); if (Status != NDIS_STATUS_SUCCESS) { DBGPRINT_ERR(("MeasureReqTabInit failed, Status[=0x%08x]\n",Status)); goto err6; } Status = TpcReqTabInit(pAd); if (Status != NDIS_STATUS_SUCCESS) { DBGPRINT_ERR(("TpcReqTabInit failed, Status[=0x%08x]\n",Status)); goto err6; } /* Init the hardware, we need to init asic before read registry, otherwise mac register will be reset*/ Status = NICInitializeAdapter(pAd, TRUE); if (Status != NDIS_STATUS_SUCCESS) { DBGPRINT_ERR(("NICInitializeAdapter failed, Status[=0x%08x]\n", Status)); if (Status != NDIS_STATUS_SUCCESS) goto err6; } #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) { } #endif /* CONFIG_AP_SUPPORT */ /* Read parameters from Config File */ /* unknown, it will be updated in NICReadEEPROMParameters */ pAd->RfIcType = RFIC_UNKNOWN; Status = RTMPReadParametersHook(pAd); DBGPRINT(RT_DEBUG_OFF, ("1. Phy Mode = %d\n", pAd->CommonCfg.PhyMode)); if (Status != NDIS_STATUS_SUCCESS) { DBGPRINT_ERR(("RTMPReadParametersHook failed, Status[=0x%08x]\n",Status)); goto err6; } #ifdef DOT11_N_SUPPORT /*Init Ba Capability parameters.*/ /* RT28XX_BA_INIT(pAd);*/ pAd->CommonCfg.DesiredHtPhy.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity; pAd->CommonCfg.DesiredHtPhy.AmsduEnable = (USHORT)pAd->CommonCfg.BACapability.field.AmsduEnable; pAd->CommonCfg.DesiredHtPhy.AmsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize; pAd->CommonCfg.DesiredHtPhy.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode; /* UPdata to HT IE*/ pAd->CommonCfg.HtCapability.HtCapInfo.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode; pAd->CommonCfg.HtCapability.HtCapInfo.AMsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize; pAd->CommonCfg.HtCapability.HtCapParm.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity; #endif /* DOT11_N_SUPPORT */ /* after reading Registry, we now know if in AP mode or STA mode*/ /* Load 8051 firmware; crash when FW image not existent*/ /* Status = NICLoadFirmware(pAd);*/ /* if (Status != NDIS_STATUS_SUCCESS)*/ /* break;*/ DBGPRINT(RT_DEBUG_OFF, ("2. Phy Mode = %d\n", pAd->CommonCfg.PhyMode)); /* We should read EEPROM for all cases. rt2860b*/ NICReadEEPROMParameters(pAd, (PSTRING)pDefaultMac); #ifdef CONFIG_STA_SUPPORT #endif /* CONFIG_STA_SUPPORT */ DBGPRINT(RT_DEBUG_OFF, ("3. Phy Mode = %d\n", pAd->CommonCfg.PhyMode)); #ifdef LED_CONTROL_SUPPORT /* Send LED Setting to MCU */ RTMPInitLEDMode(pAd); #endif /* LED_CONTROL_SUPPORT */ NICInitAsicFromEEPROM(pAd); /*rt2860b*/ #ifdef RTMP_FREQ_CALIBRATION_SUPPORT /* if (IS_RT3593(pAd))*/ /* {*/ /* Initialize the frequency calibration*/ RTMP_CHIP_ASIC_FREQ_CAL_INIT(pAd); /* }*/ #endif /* RTMP_FREQ_CALIBRATION_SUPPORT */ #ifdef RTMP_INTERNAL_TX_ALC /* Initialize the desired TSSI table*/ RTMP_CHIP_ASIC_TSSI_TABLE_INIT(pAd); #endif /* RTMP_INTERNAL_TX_ALC */ /* Set PHY to appropriate mode*/ TmpPhy = pAd->CommonCfg.PhyMode; pAd->CommonCfg.PhyMode = 0xff; RTMPSetPhyMode(pAd, TmpPhy); #ifdef DOT11_N_SUPPORT SetCommonHT(pAd); #endif /* DOT11_N_SUPPORT */ /* No valid channels.*/ if (pAd->ChannelListNum == 0) { DBGPRINT(RT_DEBUG_ERROR, ("Wrong configuration. No valid channel found. Check \"ContryCode\" and \"ChannelGeography\" setting.\n")); goto err6; } #ifdef DOT11_N_SUPPORT DBGPRINT(RT_DEBUG_OFF, ("MCS Set = %02x %02x %02x %02x %02x\n", pAd->CommonCfg.HtCapability.MCSSet[0], pAd->CommonCfg.HtCapability.MCSSet[1], pAd->CommonCfg.HtCapability.MCSSet[2], pAd->CommonCfg.HtCapability.MCSSet[3], pAd->CommonCfg.HtCapability.MCSSet[4])); #endif /* DOT11_N_SUPPORT */ #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) { #ifdef AP_QLOAD_SUPPORT /* init QBSS Element */ QBSS_LoadInit(pAd); #endif /* AP_QLOAD_SUPPORT */ } #endif /* CONFIG_AP_SUPPORT */ /* APInitialize(pAd);*/ #ifdef IKANOS_VX_1X0 VR_IKANOS_FP_Init(pAd->ApCfg.BssidNum, pAd->PermanentAddress); #endif /* IKANOS_VX_1X0 */ #ifdef CONFIG_AP_SUPPORT /* Initialize RF register to default value*/ if (pAd->OpMode == OPMODE_AP) { AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE); AsicLockChannel(pAd, pAd->CommonCfg.Channel); } #endif /* CONFIG_AP_SUPPORT */ /* Some modules init must be called before APStartUp(). Or APStartUp() will make up beacon content and call other modules API to get some information to fill. */ if (pAd && (Status != NDIS_STATUS_SUCCESS)) { /* Undo everything if it failed*/ if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE)) { /* NdisMDeregisterInterrupt(&pAd->Interrupt);*/ RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE); } /* RTMPFreeAdapter(pAd); we will free it in disconnect()*/ } else if (pAd) { /* Microsoft HCT require driver send a disconnect event after driver initialization.*/ OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED); OPSTATUS_CLEAR_FLAG(pAd, fOP_AP_STATUS_MEDIA_STATE_CONNECTED); RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_MEDIA_STATE_CHANGE); DBGPRINT(RT_DEBUG_TRACE, ("NDIS_STATUS_MEDIA_DISCONNECT Event B!\n")); #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) { if (pAd->ApCfg.bAutoChannelAtBootup || (pAd->CommonCfg.Channel == 0)) { UINT8 BBPValue = 0; /* Enable Interrupt first due to we need to scan channel to receive beacons.*/ RTMP_IRQ_ENABLE(pAd); /* Now Enable RxTx*/ RTMPEnableRxTx(pAd); RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_START_UP); /* Let BBP register at 20MHz to do scan */ RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue); BBPValue &= (~0x18); RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue); DBGPRINT(RT_DEBUG_ERROR, ("SYNC - BBP R4 to 20MHz.l\n")); /* Now we can receive the beacon and do the listen beacon*/ /* use default BW to select channel*/ pAd->CommonCfg.Channel = AP_AUTO_CH_SEL(pAd, pAd->ApCfg.AutoChannelAlg); pAd->ApCfg.bAutoChannelAtBootup = FALSE; } #ifdef DOT11_N_SUPPORT /* If phymode > PHY_11ABGN_MIXED and BW=40 check extension channel, after select channel */ N_ChannelCheck(pAd); #ifdef DOT11N_DRAFT3 /* We only do this Overlapping BSS Scan when system up, for the other situation of channel changing, we depends on station's report to adjust ourself. */ if (pAd->CommonCfg.bForty_Mhz_Intolerant == TRUE) { DBGPRINT(RT_DEBUG_TRACE, ("Disable 20/40 BSSCoex Channel Scan(BssCoex=%d, 40MHzIntolerant=%d)\n", pAd->CommonCfg.bBssCoexEnable, pAd->CommonCfg.bForty_Mhz_Intolerant)); } else if(pAd->CommonCfg.bBssCoexEnable == TRUE) { DBGPRINT(RT_DEBUG_TRACE, ("Enable 20/40 BSSCoex Channel Scan(BssCoex=%d)\n", pAd->CommonCfg.bBssCoexEnable)); APOverlappingBSSScan(pAd); } RTMP_11N_D3_TimerInit(pAd); /* RTMPInitTimer(pAd, &pAd->CommonCfg.Bss2040CoexistTimer, GET_TIMER_FUNCTION(Bss2040CoexistTimeOut), pAd, FALSE);*/ #endif /* DOT11N_DRAFT3 */ #endif /* DOT11_N_SUPPORT */ APStartUp(pAd); DBGPRINT(RT_DEBUG_OFF, ("Main bssid = %02x:%02x:%02x:%02x:%02x:%02x\n", PRINT_MAC(pAd->ApCfg.MBSSID[BSS0].Bssid))); } #endif /* CONFIG_AP_SUPPORT */ }/* end of else*/ #ifdef WSC_INCLUDED #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) { INT apidx; for (apidx = 0; apidx < pAd->ApCfg.BssidNum; apidx++) { #ifdef HOSTAPD_SUPPORT if (pAd->ApCfg.MBSSID[apidx].Hostapd == TRUE) { DBGPRINT(RT_DEBUG_TRACE, ("WPS is control by hostapd now.\n")); } else #endif /*HOSTAPD_SUPPORT*/ { PWSC_CTRL pWscControl; UCHAR zeros16[16]= {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0}; pWscControl = &pAd->ApCfg.MBSSID[apidx].WscControl; DBGPRINT(RT_DEBUG_TRACE, ("Generate UUID for apidx(%d)\n", apidx)); if (NdisEqualMemory(&pWscControl->Wsc_Uuid_E[0], zeros16, UUID_LEN_HEX)) WscGenerateUUID(pAd, &pWscControl->Wsc_Uuid_E[0], &pWscControl->Wsc_Uuid_Str[0], apidx, FALSE); WscInit(pAd, FALSE, apidx); } } } #endif /* CONFIG_AP_SUPPORT */ #ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { PWSC_CTRL pWscControl = &pAd->StaCfg.WscControl; WscGenerateUUID(pAd, &pWscControl->Wsc_Uuid_E[0], &pWscControl->Wsc_Uuid_Str[0], 0, FALSE); WscInit(pAd, FALSE, BSS0); #ifdef WSC_V2_SUPPORT WscInitRegistrarPair(pAd, &pAd->StaCfg.WscControl, BSS0); #endif /* WSC_V2_SUPPORT */ } #endif /* CONFIG_STA_SUPPORT */ /* WSC hardware push button function 0811 */ WSC_HDR_BTN_Init(pAd); #endif /* WSC_INCLUDED */ /* Set up the Mac address*/ #ifdef CONFIG_AP_SUPPORT #ifndef P2P_APCLI_SUPPORT RtmpOSNetDevAddrSet(pAd->OpMode, pAd->net_dev, &pAd->CurrentAddress[0], NULL); #endif /* P2P_APCLI_SUPPORT */ #endif /* CONFIG_AP_SUPPORT */ #ifdef CONFIG_STA_SUPPORT RtmpOSNetDevAddrSet(pAd->OpMode, pAd->net_dev, &pAd->CurrentAddress[0], (PUCHAR)(pAd->StaCfg.dev_name)); #endif /* CONFIG_STA_SUPPORT */ /* Various AP function init*/ #ifdef CONFIG_AP_SUPPORT #ifdef P2P_SUPPORT #else IF_DEV_CONFIG_OPMODE_ON_AP(pAd) #endif /* P2P_SUPPORT */ { #ifdef MBSS_SUPPORT /* the function can not be moved to RT2860_probe() even register_netdev() is changed as register_netdevice(). Or in some PC, kernel will panic (Fedora 4) */ /* RT28xx_MBSS_Init(pAd, pAd->net_dev); os abl move to rt_main_dev.c*/ #endif /* MBSS_SUPPORT */ #ifdef WDS_SUPPORT /* RT28xx_WDS_Init(pAd, pAd->net_dev);*/ #endif /* WDS_SUPPORT */ #ifdef APCLI_SUPPORT /* RT28xx_ApCli_Init(pAd, pAd->net_dev);*/ #endif /* APCLI_SUPPORT */ #ifdef UAPSD_AP_SUPPORT UAPSD_Init(pAd); #endif /* UAPSD_AP_SUPPORT */ } #endif /* CONFIG_AP_SUPPORT */ /* assign function pointers*/ #ifdef MAT_SUPPORT /* init function pointers, used in OS_ABL */ RTMP_MATOpsInit(pAd); #endif /* MAT_SUPPORT */ #ifdef RTMP_RBUS_SUPPORT #ifdef RT3XXX_ANTENNA_DIVERSITY_SUPPORT RT3XXX_AntDiversity_Init(pAd); #endif /* RT3XXX_ANTENNA_DIVERSITY_SUPPORT */ #endif /* RTMP_RBUS_SUPPORT */ #ifdef P2P_SUPPORT /* RTMP_P2P_Init(pAd, pAd->net_dev); */ #endif /* P2P_SUPPORT */ #ifdef CONFIG_AP_SUPPORT IF_DEV_CONFIG_OPMODE_ON_AP(pAd) { #ifdef MAT_SUPPORT MATEngineInit(pAd); #endif /* MAT_SUPPORT */ #ifdef CLIENT_WDS CliWds_ProxyTabInit(pAd); #endif /* CLIENT_WDS */ } #endif /* CONFIG_AP_SUPPORT */ #ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { #ifdef WPA_SUPPLICANT_SUPPORT /* send wireless event to wpa_supplicant for infroming interface up.*/ RtmpOSWrielessEventSend(pAd->net_dev, RT_WLAN_EVENT_CUSTOM, RT_INTERFACE_UP, NULL, NULL, 0); #endif /* WPA_SUPPLICANT_SUPPORT */ } #endif /* CONFIG_STA_SUPPORT */ #ifdef RTMP_RBUS_SUPPORT #ifdef DOT11_N_SUPPORT #endif /* DOT11_N_SUPPORT */ #endif /* RTMP_RBUS_SUPPORT */ #ifdef HW_ANTENNA_DIVERSITY_SUPPORT if (pAd->chipCap.FlgIsHwAntennaDiversitySup == TRUE) SetHWAntennaDivsersity(pAd, pAd->bHardwareAntennaDivesity); #endif // HW_ANTENNA_DIVERSITY_SUPPORT // RTMP_CHIP_SPECIFIC(pAd, RTMP_CHIP_SPEC_STATE_INIT, RTMP_CHIP_SPEC_INITIALIZATION, NULL, 0); DBGPRINT_S(Status, ("<==== rt28xx_init, Status=%x\n", Status)); return TRUE; err6: MeasureReqTabExit(pAd); TpcReqTabExit(pAd); err5: RtmpNetTaskExit(pAd); UserCfgExit(pAd); err4: MlmeHalt(pAd); err3: RtmpMgmtTaskExit(pAd); err2: #ifdef RESOURCE_PRE_ALLOC RTMPResetTxRxRingMemory(pAd); #else RTMPFreeTxRxRingMemory(pAd); #endif /* RESOURCE_PRE_ALLOC */ err1: #ifdef CONFIG_AP_SUPPORT /* Free BssTab & ChannelInfo tabbles.*/ AutoChBssTableDestroy(pAd); ChannelInfoDestroy(pAd); #endif /* CONFIG_AP_SUPPORT */ #ifdef DOT11_N_SUPPORT if(pAd->mpdu_blk_pool.mem) os_free_mem(pAd, pAd->mpdu_blk_pool.mem); /* free BA pool*/ #endif /* DOT11_N_SUPPORT */ /* shall not set priv to NULL here because the priv didn't been free yet.*/ /*net_dev->priv = 0;*/ #ifdef INF_AMAZON_SE err0: #endif /* INF_AMAZON_SE */ #ifdef ST err0: #endif /* ST */ DBGPRINT(RT_DEBUG_ERROR, ("!!! rt28xx Initialized fail !!!\n")); return FALSE; }