static void au0828_usb_disconnect(struct usb_interface *interface)
{
struct au0828_dev *dev = usb_get_intfdata(interface);
dprintk(1, "%s()\n", __func__);
/* there is a small window after disconnect, before
dev->usbdev is NULL, for poll (e.g: IR) try to access
the device and fill the dmesg with error messages.
Set the status so poll routines can check and avoid
access after disconnect.
*/
dev->dev_state = DEV_DISCONNECTED;
au0828_rc_unregister(dev);
/* Digital TV */
au0828_dvb_unregister(dev);
usb_set_intfdata(interface, NULL);
mutex_lock(&dev->mutex);
dev->usbdev = NULL;
mutex_unlock(&dev->mutex);
#ifdef CONFIG_BACKPORT_VIDEO_AU0828_V4L2
if (AUVI_INPUT(0).type != AU0828_VMUX_UNDEFINED) {
au0828_analog_unregister(dev);
v4l2_device_disconnect(&dev->v4l2_dev);
v4l2_device_put(&dev->v4l2_dev);
return;
}
#endif
au0828_usb_release(dev);
}
static void au0828_usb_disconnect(struct usb_interface *interface)
{
struct au0828_dev *dev = usb_get_intfdata(interface);
dprintk(1, "%s()\n", __func__);
/* Digital TV */
au0828_dvb_unregister(dev);
if (AUVI_INPUT(0).type != AU0828_VMUX_UNDEFINED)
au0828_analog_unregister(dev);
/* I2C */
au0828_i2c_unregister(dev);
v4l2_device_unregister(&dev->v4l2_dev);
usb_set_intfdata(interface, NULL);
mutex_lock(&dev->mutex);
dev->usbdev = NULL;
mutex_unlock(&dev->mutex);
kfree(dev);
}
static void au0828_usb_disconnect(struct usb_interface *interface)
{
struct au0828_dev *dev = usb_get_intfdata(interface);
dprintk(1, "%s()\n", __func__);
au0828_rc_unregister(dev);
/* Digital TV */
au0828_dvb_unregister(dev);
usb_set_intfdata(interface, NULL);
mutex_lock(&dev->mutex);
dev->usbdev = NULL;
mutex_unlock(&dev->mutex);
#ifdef CPTCFG_VIDEO_AU0828_V4L2
if (AUVI_INPUT(0).type != AU0828_VMUX_UNDEFINED) {
au0828_analog_unregister(dev);
v4l2_device_disconnect(&dev->v4l2_dev);
v4l2_device_put(&dev->v4l2_dev);
return;
}
#endif
au0828_usb_release(dev);
}
static int au0828_usb_probe(struct usb_interface *interface,
const struct usb_device_id *id)
{
int ifnum;
int retval = 0;
struct au0828_dev *dev;
struct usb_device *usbdev = interface_to_usbdev(interface);
ifnum = interface->altsetting->desc.bInterfaceNumber;
if (ifnum != 0)
return -ENODEV;
dprintk(1, "%s() vendor id 0x%x device id 0x%x ifnum:%d\n", __func__,
le16_to_cpu(usbdev->descriptor.idVendor),
le16_to_cpu(usbdev->descriptor.idProduct),
ifnum);
/*
* Make sure we have 480 Mbps of bandwidth, otherwise things like
* video stream wouldn't likely work, since 12 Mbps is generally
* not enough even for most Digital TV streams.
*/
if (usbdev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) {
pr_err("au0828: Device initialization failed.\n");
pr_err("au0828: Device must be connected to a high-speed USB 2.0 port.\n");
return -ENODEV;
}
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (dev == NULL) {
pr_err("%s() Unable to allocate memory\n", __func__);
return -ENOMEM;
}
mutex_init(&dev->lock);
mutex_lock(&dev->lock);
mutex_init(&dev->mutex);
mutex_init(&dev->dvb.lock);
dev->usbdev = usbdev;
dev->boardnr = id->driver_info;
#ifdef CPTCFG_VIDEO_AU0828_V4L2
dev->v4l2_dev.release = au0828_usb_v4l2_release;
/* Create the v4l2_device */
retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev);
if (retval) {
pr_err("%s() v4l2_device_register failed\n",
__func__);
mutex_unlock(&dev->lock);
kfree(dev);
return retval;
}
/* This control handler will inherit the controls from au8522 */
retval = v4l2_ctrl_handler_init(&dev->v4l2_ctrl_hdl, 4);
if (retval) {
pr_err("%s() v4l2_ctrl_handler_init failed\n",
__func__);
mutex_unlock(&dev->lock);
kfree(dev);
return retval;
}
dev->v4l2_dev.ctrl_handler = &dev->v4l2_ctrl_hdl;
#endif
/* Power Up the bridge */
au0828_write(dev, REG_600, 1 << 4);
/* Bring up the GPIO's and supporting devices */
au0828_gpio_setup(dev);
/* I2C */
au0828_i2c_register(dev);
/* Setup */
au0828_card_setup(dev);
#ifdef CPTCFG_VIDEO_AU0828_V4L2
/* Analog TV */
if (AUVI_INPUT(0).type != AU0828_VMUX_UNDEFINED)
au0828_analog_register(dev, interface);
#endif
/* Digital TV */
retval = au0828_dvb_register(dev);
if (retval)
pr_err("%s() au0282_dev_register failed\n",
__func__);
/* Remote controller */
au0828_rc_register(dev);
/*
* Store the pointer to the au0828_dev so it can be accessed in
* au0828_usb_disconnect
*/
usb_set_intfdata(interface, dev);
pr_info("Registered device AU0828 [%s]\n",
dev->board.name == NULL ? "Unset" : dev->board.name);
mutex_unlock(&dev->lock);
return retval;
}
