void CMultiMoveClientDlg::init_client()
{
ioCtx_t ctx;
ctx.on_error = __error_func;
ctx.on_print = __print_func;
ctx.ctx = (void*)this;
cmInit_t cm_init;
cm_init.io_ctx = ctx;
cliInit_t init;
init.ctx = (void*)this;
init.hide_cursor = ::LoadCursor(::GetModuleHandle(NULL), MAKEINTRESOURCE(IDC_CURSOR_BLANK));
init.on_notify = __client_notify;
clientInit_t client_init;
client_init.cm_init = cm_init;
client_init.cli_init = init;
if(!Client_Init(&client_init))
{
AfxAbort();
}
if(!Cli_Start())
{
AfxAbort();
}
}
void
CStcGroup::CopyDataValues( StcDataValues *pDV, HGLOBAL nValues, DWORD nValuesSize )
{
char * pnVal = (char *)GlobalLock(nValues);
if ( pnVal == NULL ) {
AfxMessageBox("GlobalLock Fails: CStcGroup::CopyVars 1" );
AfxAbort();
}
pDV->Values = GlobalAlloc( GMEM_FLAG, nValuesSize );
pDV->ValuesSize = nValuesSize;
if ( pDV->Values == NULL ) {
AfxMessageBox("GlobalAlloc Fails: CStcGroup::CopyVars 2" );
AfxAbort();
}
char *pVal = (char *)GlobalLock(pDV->Values);
if ( pVal == NULL ) {
AfxMessageBox("GlobalLock Fails: CStcGroup::CopyVars 3" );
AfxAbort();
}
while ( nValuesSize-- ) {
*pVal++ = *pnVal++;
}
GlobalUnlock(nValues);
GlobalUnlock(pDV->Values);
}
void CMultiMoveClientDlg::uninit_cliet()
{
SystemParametersInfo(SPI_SETCURSORS,0,0,WM_SETTINGCHANGE | SPIF_UPDATEINIFILE );
if(!Cli_Stop())
{
AfxAbort();
}
if(!Client_UnInit())
{
AfxAbort();
}
}
// Create an element of the current type
CElement* CMDIView::CreateElement(void) const
{
// Get a pointer to the document for this view
CMDIDoc* pDoc = GetDocument();
ASSERT_VALID(pDoc); // Verify the pointer is good
// Get the current element color
COLORREF color = static_cast<COLORREF>(pDoc->GetElementColor());
// Now select the element using the type stored in the document
switch(pDoc->GetElementType())
{
case ElementType::RECTANGLE:
return new CRectangle(m_FirstPoint, m_SecondPoint, color);
case ElementType::CIRCLE:
return new CCircle(m_FirstPoint, m_SecondPoint, color);
case ElementType::CURVE:
return new CCurve(m_FirstPoint, m_SecondPoint, color);
case ElementType::LINE:
return new CLine(m_FirstPoint, m_SecondPoint, color);
case ElementType::ELLIPSE:
return new CEllipse(m_FirstPoint, m_SecondPoint, color);
default:
// Something's gone wrong
AfxMessageBox(_T("Bad Element code"), MB_OK);
AfxAbort();
return nullptr;
}
}
CElement* CSketcherView::CreateElement(void) const
{
// Get a pointer to the document for this view
CSketcherDoc* pDoc = GetDocument();
ASSERT_VALID(pDoc); // Verify the pointer is good
// Now select the element using the type stored in the document
switch(pDoc->GetElementType())
{
case RECTANGLE:
return new CRectangle(m_FirstPoint, m_SecondPoint,pDoc->GetElementColor(),pDoc->GetElementPenStyle());
case CIRCLE:
return new CCircle(m_FirstPoint, m_SecondPoint, pDoc->GetElementColor(),pDoc->GetElementPenStyle());
case CURVE:
return new CCurve(new CPoint(m_FirstPoint), new CPoint(m_SecondPoint), pDoc->GetElementColor(),pDoc->GetElementPenStyle());
case LINE:
return new CLine(m_FirstPoint, m_SecondPoint, pDoc->GetElementColor(),pDoc->GetElementPenStyle());
case ELLIPSE:
return new CEllipse(m_FirstPoint, m_SecondPoint, pDoc->GetElementColor(),pDoc->GetElementPenStyle());
default:
// Something's gone wrong
AfxMessageBox(_T("Bad Element code"), MB_OK);
AfxAbort();
return nullptr;
}
}
// Draw a curve
void CCurve::Draw(CDC* pDC, CElement* pElement)
{
// Create a pen for this object and
// initialize it to the object color and line width of 1 pixel
CPen aPen;
COLORREF aColor = m_Color; // Initialize with element color
if(this == pElement) // This element selected?
aColor = SELECT_COLOR; // Set highlight color
if(!aPen.CreatePen(PS_SOLID, m_Pen, aColor))
{
// Pen creation failed. Close the program
AfxMessageBox(_T("Pen creation failed drawing a curve"), MB_OK);
AfxAbort();
}
CPen* pOldPen = pDC->SelectObject(&aPen); // Select the pen
// Now draw the curve
// Get the position in the list of the first element
POSITION aPosition = m_PointPtrList.GetHeadPosition();
// As long as it's good, move to that point
if(aPosition)
pDC->MoveTo(*m_PointPtrList.GetNext(aPosition));
// Draw a segment for each of the following points
while(aPosition)
pDC->LineTo(*m_PointPtrList.GetNext(aPosition));
pDC->SelectObject(pOldPen); // Restore the old pen
}
// Draw a curve
void CCurve::Draw(CDC* pDC, CElement* pElement)
{
// Create a pen for this object and
// initialize it to the object color and line width of m_PenWidth
CPen aPen;
if(!aPen.CreatePen(m_LineStyle, m_PenWidth, this==pElement ? SELECT_COLOR : m_Color))
{
// Pen creation failed
AfxMessageBox(_T("Pen creation failed drawing a curve"), MB_OK);
AfxAbort();
}
// Select the pen
CPen* pOldPen = pDC->SelectObject(& aPen);
// Now draw the curve
//pDC->MoveTo(m_Points[0]);
pDC->MoveTo(m_APoints[0]);
/*
for(size_t i=1; i<m_Points.size(); ++i)
{
pDC->LineTo(m_Points[i]);
}
*/
for(int i=1; i<m_APoints.GetSize(); ++i)
{
pDC->LineTo(m_APoints[i]);
}
pDC->SelectObject(pOldPen); // Restore the old pen
}
// Draw a circle
void CCircle::Draw(CDC* pDC, CElement* pElement)
{
// Create a pen for this object and
// initialize it to the object color and line width of 1 pixel
CPen aPen;
COLORREF aColor = m_Color; // Initialize with element color
if(this == pElement) // This element selected?
aColor = SELECT_COLOR; // Set highlight color
if(!aPen.CreatePen(PS_SOLID, m_Pen, aColor))
{
// Pen creation failed
AfxMessageBox(_T("Pen creation failed drawing a circle"), MB_OK);
AfxAbort();
}
CPen* pOldPen = pDC->SelectObject(&aPen); // Select the pen
// Select a null brush
CBrush* pOldBrush = (CBrush*)pDC->SelectStockObject(NULL_BRUSH);
// Now draw the circle
pDC->Ellipse(m_EnclosingRect);
pDC->SelectObject(pOldPen); // Restore the old pen
pDC->SelectObject(pOldBrush); // Restore the old brush
}
// Draw a circle
void CEllipse::Draw(CDC* pDC, CElement* pElement)
{
// Create a pen for this object and
// initialize it to the object color and line width of m_PenWidth
CPen aPen;
if(!aPen.CreatePen(m_LineStyle, m_PenWidth, this==pElement ? SELECT_COLOR : m_Color))
{
// Pen creation failed
AfxMessageBox(_T("Pen creation failed drawing a circle"), MB_OK);
AfxAbort();
}
// Select the pen
CPen* pOldPen = pDC->SelectObject(& aPen);
// Select a null brush
CBrush* pOldBrush = (CBrush*)pDC->SelectStockObject(NULL_BRUSH);
// Now draw the circle
pDC->Ellipse(m_EnclosingRect);
pDC->SelectObject(pOldPen); // Restore the old pen
pDC->SelectObject(pOldBrush); // Restore the old brush
}
CCPUID::CCPUID()
{
if (!CPUIDSupported())
{
AfxMessageBox("CPUID不被支持，程序即将退出");
AfxAbort();
}
}
//=--------------------------------------------------------------------------=
// CImp_DrawDlg::HandleErrors
//=--------------------------------------------------------------------------=
// Purpose: This function pops up an error dialog box and aborts further execution.
//
//
// Parameters:
// _com_error
//
// Output:
// none
//
// Notes:
// This function demonstrates how to pull an HRESULT from the _com_error class.
//
void CImp_DrawDlg::HandleErrors(_com_error &comerr)
{
HRESULT hr = comerr.Error();
char szErr[30] = "";
_itoa_s(hr, szErr, sizeof(szErr), 16);
CString tempString = "The method returned the error code 0x";
tempString += szErr;
tempString += ". Exiting.";
MessageBox(tempString, NULL, MB_ICONSTOP | MB_OK);
AfxAbort();
};
void
CStcGroup::CopyResidues( HGLOBAL nResidues, DWORD nResiduesSize )
{
if ( nResidues != NULL ) {
char * pnRes = (char *)GlobalLock(nResidues);
if ( pnRes == NULL ) {
AfxMessageBox("GlobalLock Fails: CStcGroup::CopyVars 1" );
AfxAbort();
}
m_Residues = GlobalAlloc( GMEM_FLAG, nResiduesSize );
m_ResiduesSize = nResiduesSize;
if ( m_Residues == NULL ) {
AfxMessageBox("GlobalAlloc Fails: CStcGroup::CopyVars 2" );
AfxAbort();
}
char *pRes = (char *)GlobalLock(m_Residues);
if ( pRes == NULL ) {
AfxMessageBox("GlobalLock Fails: CStcGroup::CopyVars 3" );
AfxAbort();
}
while ( nResiduesSize-- ) {
*pRes++ = *pnRes++;
}
GlobalUnlock(nResidues);
GlobalUnlock(m_Residues);
} else {
m_Residues = NULL;
m_ResiduesSize = 0;
}
}
TorrentCreator::TorrentCreator()
: m_pIPData(NULL), m_nLastAutoID(0), m_pInfoBuffer(NULL), m_nInfoBufferSize(0)
{
seedRand();
// Open the temp buffer file
if( !m_tempOutputFile.Open( "\\BTTorrentGenerator\\OutputData.tmp", CFile::modeCreate | CFile::modeReadWrite | CFile::shareDenyWrite ) )
{
TRACE( "Error opening \"\\BTTorrentGenerator\\OutputData.tmp\" temp buffer file\n" );
MessageBox( NULL, "Error opening\n\"c:\\BTTorrentGenerator\\OutputData.tmp\"\ntemp buffer file",
"No Temp File", MB_ICONEXCLAMATION | MB_OK );
AfxAbort();
return;
}
// Open the data file that is used to generate hashes, if it is not open already
if( !m_decoyDataFile.Open( "\\syncher\\rcv\\plug-ins\\BTTorrentGenerator\\TorrentDecoyFile", CFile::modeRead | CFile::shareDenyWrite ) )
{
TRACE( "Error opening input decoy data file\n" );
MessageBox( NULL, "Could not open decoy data file", "No Data File", MB_ICONEXCLAMATION | MB_OK );
AfxAbort();
return;
}
}
BOOL AFXAPI AfxAssertFailedLine( LPCSTR lpszFileName, int nLine )
/***************************************************************/
{
CString strMessage( _T("Assertion failed!\n\nFile: ") );
strMessage += lpszFileName;
strMessage.AppendFormat( _T("\nLine: %d\n\n"), nLine );
strMessage += _T("Select Abort to terminate the program.\n");
strMessage += _T("Select Retry to debug.\n");
strMessage += _T("Select Ignore to continue execution.");
int nResult = ::MessageBox( NULL, strMessage, NULL, MB_ABORTRETRYIGNORE );
if( nResult == IDABORT ) {
AfxAbort();
} else if( nResult == IDRETRY ) {
return( TRUE );
}
return( FALSE );
}
void CCell::Draw_Line(CDC* pDC, CPoint StartPos, CPoint EndPos) const
{
CPen aPen;
if(!aPen.CreatePen(PS_DOT, m_nPenWidth, m_clrColor)) {
// Pen creation failed. Close the program
AfxMessageBox("Pen creation failed drawing a curve", MB_OK);
AfxAbort();
}
CPen* pOldPen = pDC->SelectObject(&aPen); // Select the pen
pDC->MoveTo(StartPos);
pDC->LineTo(EndPos);
pDC->SelectObject(pOldPen); // Restore the old pen
}
// ----------------------------------------------------------------------------
// 2006-10-23 오전 3:43:27 추가(New), Sun.H.D
// 호출 시점 : Dotted Line
//
// 특 징 :
//
// 매개 변수 :
//
// 리 턴 값 :
// ----------------------------------------------------------------------------
void CDottedLine::Draw(CDC* pDC)
{
CPen aPen;
if(!aPen.CreatePen(PS_DOT, 1, m_clrColor)) {
// Pen creation failed. Close the program
AfxMessageBox("Pen creation failed drawing a curve", MB_OK);
AfxAbort();
}
CPen* pOldPen = pDC->SelectObject(&aPen); // Select the pen
pDC->MoveTo(m_ptStartPoint);
pDC->LineTo(m_ptEndPoint);
pDC->SelectObject(pOldPen); // Restore the old pen
}
BOOL AssertFailedLine(LPCSTR lpszFileName, int nLine)
{
TCHAR szMessage[_MAX_PATH*2];
InterlockedDecrement(&AssertReallyBusy);
// format message into buffer
wsprintf(szMessage, _T("File %hs, Line %d"),
lpszFileName, nLine);
TCHAR szT[_MAX_PATH*2 + 20];
wsprintf(szT, _T("Assertion Failed: %s\n"), szMessage);
OutputDebugString(szT);
if (InterlockedIncrement(&AssertBusy) > 0)
{
InterlockedDecrement(&AssertBusy);
// assert within assert (examine call stack to determine first one)
DebugBreak();
return FALSE;
}
// active popup window for the current thread
HWND hWndParent = GetActiveWindow();
if (hWndParent != NULL)
hWndParent = GetLastActivePopup(hWndParent);
// display the assert
int nCode = ::MessageBox(hWndParent, szMessage, _T("Assertion Failed!"),
MB_TASKMODAL|MB_ICONHAND|MB_ABORTRETRYIGNORE|MB_SETFOREGROUND);
// cleanup
InterlockedDecrement(&AssertBusy);
if (nCode == IDIGNORE)
return FALSE; // ignore
if (nCode == IDRETRY)
return TRUE; // will cause DebugBreak
AfxAbort(); // should not return (but otherwise DebugBreak)
return TRUE;
}
void CCell::Draw_Rect(CDC* pDC, CRect rect) const
{
CPen aPen;
if(!aPen.CreatePen(PS_SOLID, m_nPenWidth, m_clrColor)) {
// Pen creation failed. Close the program
AfxMessageBox("Pen creation failed drawing a curve", MB_OK);
AfxAbort();
}
CPen* pOldPen = pDC->SelectObject(&aPen); // Select the pen
CBrush* pOldBrush = static_cast<CBrush*>(pDC->SelectStockObject(HOLLOW_BRUSH));
pDC->Rectangle(rect);
pDC->SelectObject(pOldPen); // Restore the old pen
pDC->SelectObject(pOldBrush); // Restore the old brush
}
// Draw a CLine object
void CLine::Draw(CDC* pDC, CElement* pElement)
{
// Create a pen for this object and
// initialize it to the object color and line width m_PenWidth
CPen aPen;
if (!aPen.CreatePen(PS_SOLID, m_PenWidth, this == pElement ? SELECT_COLOR : m_Color)) {
// Pen creation failed. Abort the program
AfxMessageBox(_T("Pen creation failed drawing a line"), MB_OK);
AfxAbort();
}
CPen* pOldPen = pDC->SelectObject(&aPen); // Select the pen
// Now draw the line
pDC->MoveTo(m_StartPoint);
pDC->LineTo(m_EndPoint);
pDC->SelectObject(pOldPen); // Restore the old pen
}
// Draw a curve
void CCurve::Draw(CDC* pDC, CElement* pElement)
{
// Create a pen for this object and
// initialize it to the object color and line width of m_PenWidth
CPen aPen;
if(!aPen.CreatePen(PS_SOLID, m_PenWidth, this==pElement ? SELECT_COLOR : m_Color))
{
// Pen creation failed
AfxMessageBox(_T("Pen creation failed drawing a curve"), MB_OK);
AfxAbort();
}
CPen* pOldPen = pDC->SelectObject(&aPen); // Select the pen
// A forward iterator enables you to traverse the list forwards
auto iter = m_Points.begin(); // Create a forward iterator
pDC->MoveTo(**(iter++)); // Move to the first point and increment the iterator
for(; iter != m_Points.end() ; ++iter) // Draw segments between the remaining points
pDC->LineTo(**iter);
pDC->SelectObject(pOldPen); // Restore the old pen
}
void CInkPoint::Draw(CDC* pDC, const CInkPoint* pElement)
{
CPen aPen;
CPen* pOldPen;
CString aStr;
COLORREF aColor = m_inkPointInfo.clrColor;
if ( m_inkPointInfo.bSelected == TRUE )
aColor = SELECT_COLOR;
if(!aPen.CreatePen(PS_SOLID, m_inkPointInfo.nPenWidth, aColor))
{
// Pen creation failed
AfxMessageBox("Pen creation failed drawing a InkPoint", MB_OK);
AfxAbort();
}
pOldPen = pDC->SelectObject(&aPen); // Select the apen
// Select a null brush
CBrush* pOldBrush = static_cast<CBrush*>(pDC->SelectStockObject(HOLLOW_BRUSH));
//m_rtEnclosingRect = GetBoundRect();
pDC->Ellipse(m_inkPointInfo.rtEnclosingRect);
pDC->SelectObject(pOldPen); // Restore th old pen
pDC->SelectObject(pOldBrush); // Restore the old brush
// Dotted Line Draw
m_inkPointInfo.dlineDottedLine.m_ptStartPoint.x = m_inkPointInfo.rtEnclosingRect.right;
m_inkPointInfo.dlineDottedLine.m_ptStartPoint.y = ((m_inkPointInfo.rtEnclosingRect.bottom - m_inkPointInfo.rtEnclosingRect.top) / 2 ) + m_inkPointInfo.rtEnclosingRect.top;
m_inkPointInfo.dlineDottedLine.m_ptEndPoint.x = m_inkPointInfo.rtEnclosingRect.right + 40;
m_inkPointInfo.dlineDottedLine.m_ptEndPoint.y = ((m_inkPointInfo.rtEnclosingRect.bottom - m_inkPointInfo.rtEnclosingRect.top) / 2 ) + m_inkPointInfo.rtEnclosingRect.top;
m_inkPointInfo.dlineDottedLine.m_clrColor = BLACK;
m_inkPointInfo.dlineDottedLine.Draw(pDC);
}
// Draw a CLine object
void CLine::Draw(CDC* pDC, CElement* pElement)
{
// Create a pen for this object and
// initialize it to the object color and line width of 1 pixel
CPen aPen;
COLORREF aColor = m_Color; // Initialize with element color
if(this == pElement) // This element selected?
aColor = SELECT_COLOR; // Set highlight color
if(!aPen.CreatePen(PS_SOLID, m_Pen, aColor))
{
// Pen creation failed. Abort the program
AfxMessageBox(_T("Pen creation failed drawing a line"), MB_OK);
AfxAbort();
}
CPen* pOldPen = pDC->SelectObject(&aPen); // Select the pen
// Now draw the line
pDC->MoveTo(m_StartPoint);
pDC->LineTo(m_EndPoint);
pDC->SelectObject(pOldPen); // Restore the old pen
}
static void InternalAssert(const TCHAR * AssertDescription, const char * lpszFileName, INT32 nLine, BOOL UseMFC)
{
if (!UseMFC)
#if defined(__WXMSW__)
MessageBeep(MB_ICONASTERISK);
#else
::wxBell();
#endif
#ifdef _ENSURES
TCHAR sz[256];
static TCHAR BASED_CODE szTitle[] = wxT("Ensure Failed!");
// In Unicode we need to convert the filename to TCHAR
#if 0 != wxUSE_UNICODE
TCHAR szRealFile[256];
size_t count = camMbstowcs(szRealFile, lpszFileName, 255);
if (count == (size_t)-1)
count = 0;
szRealFile[count] = (TCHAR)0;
const TCHAR* lpszRealFile = szRealFile;
#else
const TCHAR* lpszRealFile = lpszFileName;
#endif
static TCHAR BASED_CODE szMessage[] = wxT("%s, File %s, Line %d");
static TCHAR BASED_CODE szMessageNoReason[] = wxT("Error %d@%s"); // note number first
// get app name or NULL if unknown (don't call assert)
// const TCHAR *pszAppName = wxGetApp().GetAppName();
if (AssertDescription != NULL)
{
camSnprintf(sz, 255,
szMessage,
AssertDescription,
lpszRealFile,
nLine);
}
else
{
camSnprintf(sz, 255,
szMessageNoReason,
nLine,
lpszRealFile);
}
#ifdef _DEBUG
//PORTNOTE("other","Remove afxTraceEnabled")
//#ifndef EXCLUDE_FROM_XARALX
// if (afxTraceEnabled)
#if defined(__WXMSW__)
{
// assume the debugger or auxiliary port
#ifndef _MAC
::OutputDebugString(sz);
::OutputDebugString(_T(", "));
::OutputDebugString(szTitle);
::OutputDebugString(_T("\n\r"));
#else
// Mac version needs them all together
camStrcat(sz, _T(", "));
camStrcat(sz,szTitle);
camStrcat(sz,_T("\n\r"));
::OutputDebugString(sz);
#endif
}
#endif
#endif
if (AssertBusy > 0)
{
// getting assertion while inside an assertion
// - it has already been traced, but
// break into the debugger (or Dr Watson log)
DEBUGBREAK; // else Win32s might die (just beeps)
return;
}
AssertBusy++;
if ( Error::IsInRenderThread() )
{
TRACE( wxT("In RenderThread so clearing up system") );
Error::RenderThreadReset();
// Commented out - no problem using wx for render errors
// UseMFC = FALSE; // mustn't use MFC for render errors
}
INT32 result;
TCHAR RealErrorMsg[256];
if (UseMFC)
{
// use our error handler to report ensures as it is more robust instead of MessageBox
// The arrangement of buttons is the same as the exception handler dialog, not the same
// as the original Ensure dialog (which was Abort/Retry/Ignore)
ErrorInfo Info;
// try to preserve original error message
camStrcpy( RealErrorMsg, Error::GetErrorString() );
Error::SetErrorSerious( sz ); // set error msg (vaping any previous one)
Info.ErrorMsg = 0;
Info.Button[0] = _R(IDS_CONTINUE);
Info.Button[1] = _R(IDS_QUIT);
#ifndef EXCLUDE_FROM_XARALX
if (IsWin32NT())
{
#endif
// only NT can cope with an Abort button
Info.Button[2] = _R(IDS_ABORT);
Info.Button[3] = _R(IDS_DEBUG);
#ifndef EXCLUDE_FROM_XARALX
}
else
{
Info.Button[2] = _R(IDS_DEBUG);
}
#endif
// no default button (or Help)
Info.Cancel = 1; // Esc = Continue
result = InformGeneral( ERRORTYPE_ENSURE, &Info );
}
else
{
CamResource::DoneInit();
CCamApp::DisableSystem();
// e.g. if this an MFC assert, don't use our lovely error handler becuase that itself
// uses MFC. Instead we use good old MessageBox
#if !defined(EXCLUDE_FROM_RALPH) && !defined(EXCLUDE_FROM_XARALX)
wxWindow *pParent = AfxGetApp().GetTopWindow();
PORTNOTE("other","Use CInformErrorDialog::GetSafeParent() when implemented")
#ifndef EXCLUDE_FROM_XARALX
CInformErrorDialog::GetSafeParent();
#endif
#else
wxWindow *pParent = NULL;
#endif
wxMessageDialog Dialog( pParent, sz, szTitle, wxICON_HAND | wxYES_NO | wxCANCEL );
INT32 nCode = Dialog.ShowModal();
CCamApp::EnableSystem();
// convert MessageBox return value into a sane button ID
switch (nCode)
{
case wxID_NO:
result = _R(IDS_ABORT);
break;
case wxID_YES:
result = _R(IDS_DEBUG);
break;
case wxID_CANCEL:
default:
result = _R(IDS_CONTINUE);
break;
}
}
AssertBusy--;
if ((ResourceID)result == _R(IDS_DEBUG))
{
DEBUGBREAK;
}
// no action on _R(IDS_CONTINUE))
else if ((ResourceID)result == _R(IDS_QUIT))
{
// quit in a slightly nice way
wxWindow *MainWnd = AfxGetApp().GetTopWindow();
if( MainWnd && MainWnd->IsShown() )
{
MainWnd->Destroy();
}
} // drop through
if (((ResourceID)result == _R(IDS_ABORT)) || ((ResourceID)result == _R(IDS_QUIT)))
{
// if no window, try nasty exit
AfxAbort();
return; // how did we get here?
}
// if we ever get here we just carry on as if nothing happened
PORTNOTE("other","We can never use MFC again")
#ifndef EXCLUDE_FROM_XARALX
if (UseMFC)
{
if (RealErrorMsg[0])
Error::SetErrorSerious( RealErrorMsg ); // restore previous error msg
else
Error::ClearError();
}
#endif
#else
// parameters not used if non-debug
(void)lpszFileName;
(void)nLine;
#endif // _ENSURES
}
BOOL AFXAPI AfxAssertFailedLine(LPCSTR lpszFileName, int nLine)
{
TCHAR szMessage[_MAX_PATH*2];
// handle the (hopefully rare) case of AfxGetAllocState ASSERT
if (InterlockedIncrement(&afxAssertReallyBusy) > 0)
{
// assume the debugger or auxiliary port
wsprintf(szMessage, _T("Assertion Failed: File %hs, Line %d\n"),
lpszFileName, nLine);
OutputDebugString(szMessage);
InterlockedDecrement(&afxAssertReallyBusy);
// assert w/in assert (examine call stack to determine first one)
AfxDebugBreak();
return FALSE;
}
// check for special hook function (for testing diagnostics)
AFX_THREAD_STATE* pThreadState = AfxGetThreadState();
AFX_ALLOC_STATE* pAllocState = AfxGetAllocState();
InterlockedDecrement(&afxAssertReallyBusy);
if (pAllocState->m_lpfnAssertFailedLine != NULL)
return pAllocState->m_lpfnAssertFailedLine(lpszFileName, nLine);
// get app name or NULL if unknown (don't call assert)
LPCTSTR lpszAppName = afxCurrentAppName;
if (lpszAppName == NULL)
lpszAppName = _T("<unknown application>");
// format message into buffer
wsprintf(szMessage, _T("%s: File %hs, Line %d"),
lpszAppName, lpszFileName, nLine);
if (afxTraceEnabled)
{
// assume the debugger or auxiliary port
// output into MacsBug looks better if it's done in one string,
// since MacsBug always breaks the line after each output
TCHAR szT[_MAX_PATH*2 + 20];
wsprintf(szT, _T("Assertion Failed: %s\n"), szMessage);
OutputDebugString(szT);
}
if (InterlockedIncrement(&afxAssertBusy) > 0)
{
InterlockedDecrement(&afxAssertBusy);
// assert within assert (examine call stack to determine first one)
AfxDebugBreak();
return FALSE;
}
// active popup window for the current thread
HWND hWndParent = GetActiveWindow();
if (hWndParent != NULL)
hWndParent = GetLastActivePopup(hWndParent);
// display the assert
int nCode = ::MessageBox(hWndParent, szMessage, _T("Assertion Failed!"),
MB_TASKMODAL|MB_ICONHAND|MB_ABORTRETRYIGNORE|MB_SETFOREGROUND);
// cleanup
InterlockedDecrement(&afxAssertBusy);
if (nCode == IDIGNORE)
return FALSE; // ignore
if (nCode == IDRETRY)
return TRUE; // will cause AfxDebugBreak
UNUSED nLine; // unused in release build
UNUSED lpszFileName;
AfxAbort(); // should not return (but otherwise AfxDebugBreak)
return TRUE;
}
void CRTEXToolView::DrawArm(int x1, int y1,int z1,float m_fYaw,float theta1,float theta2)
{
UINT sizenum = pDoc->m_view_resolution / uiscale;
CClientDC pDC(this);
OnPrepareDC(&pDC);
CPoint pt,ptAxis;
float m_fScaraRobot_L1 = 325;
float m_fScaraRobot_L2 = 225;
float m_fScaraRobot_Height_Asix1 = (290+74);
float fXpos=0,fYpos=0,fZpos=0;
int xJ1, yJ1,zJ1,xJ2, yJ2,zJ2,xJ3, yJ3,zJ3;
///////////////////////////////////////////////////////////////
CPen axisPen2;
if(!axisPen2.CreatePen(PS_SOLID ,500,RGB(255,255,255)))
{
// Pen creation failed. Abort the program
AfxMessageBox(_T("Pen creation failed drawing a line"), MB_OK);
AfxAbort();
}
CPen* pOldPen = pDC.SelectObject(&axisPen2); // Select the pen
///////////////////////////////////////////////////////////////
pDC.MoveTo(0,0);
ptAxis = Cpt3DptTo2Dpt(xJ1_backup,yJ1_backup,zJ1_backup);
pDC.LineTo(ptAxis.x,ptAxis.y);
pDC.Ellipse(ptAxis.x-sizenum,ptAxis.y+sizenum,ptAxis.x+sizenum,ptAxis.y-sizenum);
ptAxis = Cpt3DptTo2Dpt(xJ2_backup,yJ2_backup,zJ2_backup);
pDC.LineTo(ptAxis.x,ptAxis.y);
pDC.Ellipse(ptAxis.x-sizenum,ptAxis.y+sizenum,ptAxis.x+sizenum,ptAxis.y-sizenum);
ptAxis = Cpt3DptTo2Dpt(xJ3_backup,yJ3_backup,zJ3_backup);
pDC.LineTo(ptAxis.x,ptAxis.y);
pDC.Ellipse(ptAxis.x-sizenum,ptAxis.y+sizenum,ptAxis.x+sizenum,ptAxis.y-sizenum);
ptAxis = Cpt3DptTo2Dpt(x1_backup,y1_backup,z1_backup);
pDC.LineTo(ptAxis.x,ptAxis.y);
// pDC.Ellipse(ptAxis.x-sizenum,ptAxis.y+sizenum,ptAxis.x+sizenum/5,ptAxis.y-sizenum/5);
pDC.SelectObject(pOldPen);
////////////////draw xyz back //////////////////////////////////////
CPen axisPen;
if(!axisPen.CreatePen(PS_DOT,10,RGB(255,0,0)))
{
// Pen creation failed. Abort the program
AfxMessageBox(_T("Pen creation failed drawing a line"), MB_OK);
AfxAbort();
}
pOldPen = pDC.SelectObject(&axisPen); // Select the pen
int showaxis = pDoc->m_view_resolution;
// CPoint ptAxis;
pDC.MoveTo(0,0);
ptAxis = Cpt3DptTo2Dpt(showaxis,0,0);
pDC.LineTo(ptAxis.x,ptAxis.y);
pDC.Ellipse(ptAxis.x-sizenum,ptAxis.y+sizenum,ptAxis.x+sizenum,ptAxis.y-sizenum);
pDC.TextOut(ptAxis.x,ptAxis.y,"X");
pDC.MoveTo(0,0);
ptAxis = Cpt3DptTo2Dpt(0,showaxis,0);
pDC.LineTo(ptAxis.x,ptAxis.y);
pDC.Ellipse(ptAxis.x-sizenum,ptAxis.y+sizenum,ptAxis.x+sizenum,ptAxis.y-sizenum);
pDC.TextOut(ptAxis.x,ptAxis.y,"Y");
pDC.MoveTo(0,0);
ptAxis = Cpt3DptTo2Dpt(0,0,showaxis);
pDC.LineTo(ptAxis.x,ptAxis.y);
pDC.Ellipse(ptAxis.x-sizenum,ptAxis.y+sizenum,ptAxis.x+sizenum,ptAxis.y-sizenum);
pDC.TextOut(ptAxis.x,ptAxis.y,"Z");
pDC.SelectObject(pOldPen);
CPen axisPen1;
if(!axisPen1.CreatePen(PS_DOT,10,RGB(0,0,255)))
{
// Pen creation failed. Abort the program
AfxMessageBox(_T("Pen creation failed drawing a line"), MB_OK);
AfxAbort();
}
pOldPen = pDC.SelectObject(&axisPen1); // Select the pen
pDC.MoveTo(0,0);
ptAxis = Cpt3DptTo2Dpt(-showaxis,0,0);
pDC.LineTo(ptAxis.x,ptAxis.y);
pDC.MoveTo(0,0);
ptAxis = Cpt3DptTo2Dpt(0,-showaxis,0);
pDC.LineTo(ptAxis.x,ptAxis.y);
pDC.MoveTo(0,0);
ptAxis = Cpt3DptTo2Dpt(0,0,-showaxis);
pDC.LineTo(ptAxis.x,ptAxis.y);
// pDC.TextOut(cr.TopLeft().x,cr.TopLeft().y,"X vs Y vs Z");
pDC.SelectObject(pOldPen);
////////////////draw xyz back end//////////////////////////////////////
///////////////////////////////////////////////////////////////
CPen axisPen3;
if(!axisPen3.CreatePen(PS_SOLID ,500,RGB(50,100,150)))
{
// Pen creation failed. Abort the program
AfxMessageBox(_T("Pen creation failed drawing a line"), MB_OK);
AfxAbort();
}
CPen* pOldPen3 = pDC.SelectObject(&axisPen3); // Select the pen
///////////////////////////////////////////////////////////////
xJ1 = 0 ;
yJ1 = 0 ;
zJ1 = 0 +(int)(0.5 + (m_fScaraRobot_Height_Asix1 * 1000));
fXpos = (float)(m_fScaraRobot_L1 * cos((theta1)*M_PI/180));
fYpos = (float)(m_fScaraRobot_L1 * sin((theta1)*M_PI/180));
xJ2 = xJ1+(int)(0.5 + (fXpos * 1000));
yJ2 = yJ1+(int)(0.5 + (fYpos * 1000));
zJ2 = zJ1;
fXpos = (float)(m_fScaraRobot_L2 * cos((theta1+theta2)*M_PI/180));
fYpos = (float)(m_fScaraRobot_L2 * sin((theta1+theta2)*M_PI/180));
xJ3 = xJ2+(int)(0.5 + (fXpos * 1000));
yJ3 = yJ2+(int)(0.5 + (fYpos * 1000));
zJ3 = zJ2;
pDC.MoveTo(0,0);
ptAxis = Cpt3DptTo2Dpt(xJ1,yJ1,zJ1);
pDC.LineTo(ptAxis.x,ptAxis.y);
pDC.Ellipse(ptAxis.x-sizenum,ptAxis.y+sizenum,ptAxis.x+sizenum,ptAxis.y-sizenum);
ptAxis = Cpt3DptTo2Dpt(xJ2,yJ2,zJ2);
pDC.LineTo(ptAxis.x,ptAxis.y);
pDC.Ellipse(ptAxis.x-sizenum,ptAxis.y+sizenum,ptAxis.x+sizenum,ptAxis.y-sizenum);
ptAxis = Cpt3DptTo2Dpt(xJ3,yJ3,zJ3);
pDC.LineTo(ptAxis.x,ptAxis.y);
pDC.Ellipse(ptAxis.x-sizenum,ptAxis.y+sizenum,ptAxis.x+sizenum,ptAxis.y-sizenum);
ptAxis = Cpt3DptTo2Dpt(x1,y1,z1);
pDC.LineTo(ptAxis.x,ptAxis.y);
// pDC.Ellipse(ptAxis.x-sizenum,ptAxis.y+sizenum,ptAxis.x+sizenum,ptAxis.y-sizenum);
pDC.SelectObject(pOldPen3);
xJ1_backup = xJ1;
yJ1_backup = yJ1;
zJ1_backup = zJ1;
xJ2_backup = xJ2;
yJ2_backup = yJ2;
zJ2_backup = zJ2;
xJ3_backup = xJ3;
yJ3_backup = yJ3;
zJ3_backup = zJ3;
x1_backup = x1;
y1_backup = y1;
z1_backup = z1;
}
void CRTEXToolView::OnDraw(CDC* pDC)
{
//CRTEXToolDoc* pDoc = GetDocument();
ASSERT_VALID(pDoc);
if (!pDoc)
return;
// TODO: 在此加入原生資料的描繪程式碼
UINT sizenum = pDoc->m_view_resolution * 5 / uiscale;
CPen axisPen;
if(!axisPen.CreatePen(PS_DOT,10,RGB(255,0,0)))
{
// Pen creation failed. Abort the program
AfxMessageBox(_T("Pen creation failed drawing a line"), MB_OK);
AfxAbort();
}
CPen* pOldPen = pDC->SelectObject(&axisPen); // Select the pen
CRect cr;
CSize size;
GetClientRect(&cr);
pDC->DPtoLP(&cr);
int showaxis = pDoc->m_view_resolution;
CPoint ptAxis;
pDC->MoveTo(0,0);
ptAxis = Cpt3DptTo2Dpt(showaxis,0,0);
pDC->LineTo(ptAxis.x,ptAxis.y);
pDC->Ellipse(ptAxis.x-sizenum,ptAxis.y+sizenum,ptAxis.x+sizenum,ptAxis.y-sizenum);
pDC->TextOut(ptAxis.x,ptAxis.y,"X");
pDC->MoveTo(0,0);
ptAxis = Cpt3DptTo2Dpt(0,showaxis,0);
pDC->LineTo(ptAxis.x,ptAxis.y);
pDC->Ellipse(ptAxis.x-sizenum,ptAxis.y+sizenum,ptAxis.x+sizenum,ptAxis.y-sizenum);
pDC->TextOut(ptAxis.x,ptAxis.y,"Y");
pDC->MoveTo(0,0);
ptAxis = Cpt3DptTo2Dpt(0,0,showaxis);
pDC->LineTo(ptAxis.x,ptAxis.y);
pDC->Ellipse(ptAxis.x-sizenum,ptAxis.y+sizenum,ptAxis.x+sizenum,ptAxis.y-sizenum);
pDC->TextOut(ptAxis.x,ptAxis.y,"Z");
/*
pDC->MoveTo(cr.TopLeft().x,0);
pDC->LineTo(cr.BottomRight().x,0);
pDC->MoveTo(0,cr.BottomRight().y);
pDC->LineTo(0,cr.TopLeft().y);
pDC->TextOut(cr.TopLeft().x,cr.TopLeft().y,"X vs Y");
*/
pDC->SelectObject(pOldPen);
CPen axisPen1;
if(!axisPen1.CreatePen(PS_DOT,10,RGB(0,0,255)))
{
// Pen creation failed. Abort the program
AfxMessageBox(_T("Pen creation failed drawing a line"), MB_OK);
AfxAbort();
}
pOldPen = pDC->SelectObject(&axisPen1); // Select the pen
pDC->MoveTo(0,0);
ptAxis = Cpt3DptTo2Dpt(-showaxis,0,0);
pDC->LineTo(ptAxis.x,ptAxis.y);
pDC->MoveTo(0,0);
ptAxis = Cpt3DptTo2Dpt(0,-showaxis,0);
pDC->LineTo(ptAxis.x,ptAxis.y);
pDC->MoveTo(0,0);
ptAxis = Cpt3DptTo2Dpt(0,0,-showaxis);
pDC->LineTo(ptAxis.x,ptAxis.y);
pDC->TextOut(cr.TopLeft().x,cr.TopLeft().y,"X vs Y vs Z");
pDC->SelectObject(pOldPen);
/*
CPoint* currentPt;
for(auto iter = pDoc->begin() ; iter != pDoc->end() ; ++iter)
{
currentPt = *iter;
pDC->Ellipse(currentPt->x-sizenum,currentPt->y+sizenum,currentPt->x+sizenum,currentPt->y-sizenum);
}
*/
if(!pDoc->m_fgskipRedraw)
{
sizenum = pDoc->m_view_resolution / uiscale;
CString str;
int xx,yy,zz;
pDoc->savefile.SeekToBegin();
while(pDoc->savefile.ReadString(str))
{
if(str.Left(4) =="XYZ:")
{
xx = atoi((LPCSTR)str.Mid(39,9));
yy = atoi((LPCSTR)str.Mid(49,9));
zz = atoi((LPCSTR)str.Mid(59,9));
CPoint pt;
pt = Cpt3DptTo2Dpt(xx,yy,zz);
pDC->Ellipse(pt.x-sizenum,pt.y+sizenum,pt.x+sizenum,pt.y-sizenum);
//pDC->Ellipse(xx-sizenum,yy+sizenum,xx+sizenum,yy-sizenum);
}
}
pDoc->savefile.SeekToEnd();
}
}
/***************************************************
CUGODBCDatasource::Browse : call this function to invoke the
ODBC driver to prompt for connection params.
This function gathers information about all of the
tables in the datasource selected, storing the information
in the array m_dsInfoArray for later retrieval.
This function also saves the resulting connect string for
later use.
****************************************************/
int CUGODBCDatasource::Browse(HWND hwnd){
HENV henv;
HDBC hdbc;
HSTMT hstmt;
RETCODE retcode;
SQLTCHAR buf[255];
SQLTCHAR sqlerror[255];
SQLTCHAR sqlstate[255];
SDWORD nerr, cbVal;
SWORD num;
// for table info....
SQLTCHAR szTableQualifier[128];
SQLTCHAR szTableOwner[128];
SQLTCHAR szTableName[128];
SQLTCHAR szTableType[128];
SQLTCHAR szRemarks[255];
// close open db
Close();
// clean up previous data
m_connectString = "";
m_tableCount = 0;
retcode = SQLAllocEnv(&henv); // Environment handle
if (retcode == SQL_ERROR) {
AfxMessageBox(_T("Probable memory allocation error in SQLAllocEnv"));
return (int) retcode;
}
retcode = SQLAllocConnect(henv,&hdbc);
if (retcode == SQL_ERROR) {
ReportSQLError(henv, SQL_NULL_HDBC, SQL_NULL_HSTMT, retcode, _T("SQLAllocConnect"));
SQLFreeEnv(henv);
return (int) retcode;
}
if (retcode == SQL_SUCCESS || retcode == SQL_SUCCESS_WITH_INFO) {
// Set login timeout to 5 seconds.
SQLSetConnectOption(hdbc, SQL_LOGIN_TIMEOUT, 5);
// Connect to data source
// this should cause the ODBC Driver to come up with the
// necessary prompts to form a connect string...
retcode = SQLDriverConnect(hdbc,hwnd,(SQLTCHAR*)_T(""),
0,buf,254,&num,SQL_DRIVER_PROMPT);
if (retcode != SQL_SUCCESS) {
#ifdef UG_REPORT_ERROR
ReportSQLError(henv, hdbc, SQL_NULL_HSTMT, retcode, _T("SQLDriverConnect"));
#endif
// user probably cancelled connection...
if (retcode != SQL_SUCCESS_WITH_INFO) {
SQLFreeConnect(hdbc);
SQLFreeEnv(henv);
return retcode;
}
}
if(retcode == SQL_SUCCESS || retcode == SQL_SUCCESS_WITH_INFO){
// retcode from SQLDriverConnect...
// should be cool to try to open a recordset with the info
// we have here in buf...
CDatabase db;
TCHAR buf2[255];
UGStr::stprintf(buf2,255,_T("ODBC;%s"),buf);
// now we have the connect string in buf2 - but wait to
// see if we can actually open the db before storing
// it in m_connectString...
try {
retcode = db.Open(NULL,FALSE,FALSE,buf2);
}
catch(CMemoryException* e){
#ifdef UG_ODBC_REPORTERROR
e->ReportError();
#endif
e->Delete();
AfxAbort();
}
catch(CDBException* e){
// standard procedure for ODBC - save the
// RETCODE code for the return value -
// Report on the error - optional -
// use Delete to delete the exception object
RETCODE er = e->m_nRetCode;
#ifdef UG_ODBC_REPORTERROR
e->ReportError();
#endif
e->Delete();
SQLFreeConnect(hdbc);
SQLFreeEnv(henv);
return (int)er;
}
// now, given an open connection, we should
// be able to set up a statement handle..
retcode = SQLAllocStmt(hdbc, &hstmt);
switch (retcode) {
case SQL_SUCCESS: {
// AfxMessageBox("SQLAllocStmt returned success ");
// AfxMessageBox((LPCSTR)buf);
break;
}
case SQL_SUCCESS_WITH_INFO:{
AfxMessageBox(_T("SQLAllocStmt returned success with info"));
// this indicates that there is a driver specific warning
// to be investigated...
SQLError(SQL_NULL_HENV,hdbc,SQL_NULL_HSTMT,sqlstate,
&nerr,sqlerror,254,&num);
AfxMessageBox((LPCTSTR)sqlstate);
AfxMessageBox((LPCTSTR)sqlerror);
break;
}
case SQL_NO_DATA_FOUND:{
AfxMessageBox(_T("SQLAllocStmt returned no data found"));
break;
}
case SQL_ERROR:{
AfxMessageBox(_T("SQLAllocStmt returned sql error"));
SQLError(SQL_NULL_HENV,hdbc,SQL_NULL_HSTMT,sqlstate,&nerr,sqlerror,254,&num);
AfxMessageBox((LPCTSTR)sqlstate);
AfxMessageBox((LPCTSTR)sqlerror);
break;
}
case SQL_INVALID_HANDLE:{
AfxMessageBox(_T("SQLDriverConnect returned invalid handle"));
break;
}
default:
break;
}
// ok - now lets see if we can enumerate the tables
// contained in the database...
retcode = SQLTables(hstmt, // statement handle for
// retrieved results
NULL, // szTableQualifier
SQL_NTS, // cbTableQualifier
NULL, // szTableOwner
SQL_NTS, // cbTableOwner
NULL, // szTableName
SQL_NTS, // cbTableName
(SQLTCHAR*)_T("'TABLE','VIEW',\
'SYSTEM TABLE','GLOBAL TEMPORARY','LOCAL TEMPORARY',\
'ALIAS','SYNONYM'"), // szTableType (list of
// table types to match)
SQL_NTS); // cbTableTypes
if (retcode == SQL_ERROR || retcode == SQL_SUCCESS_WITH_INFO) {
ReportSQLError(henv, hdbc, hstmt, retcode, _T("SQLTables"));
SQLFreeStmt(hstmt, SQL_DROP);
SQLDisconnect(hdbc);
SQLFreeConnect(hdbc);
SQLFreeEnv(henv);
return retcode; // unable to query tables
// User should see message box
}
// now - can we iterate through the tables found?
#ifndef _UNICODE
SQLBindCol(hstmt, 1, SQL_C_CHAR, szTableQualifier, 128, &cbVal);
SQLBindCol(hstmt, 2, SQL_C_CHAR, szTableOwner, 128, &cbVal);
SQLBindCol(hstmt, 3, SQL_C_CHAR, szTableName, 128, &cbVal);
SQLBindCol(hstmt, 4, SQL_C_CHAR, szTableType, 128, &cbVal);
SQLBindCol(hstmt, 5, SQL_C_CHAR, szRemarks, 255, &cbVal);
#else
SQLBindCol(hstmt, 1, SQL_UNICODE_CHAR, szTableQualifier, 128, &cbVal);
SQLBindCol(hstmt, 2, SQL_UNICODE_CHAR, szTableOwner, 128, &cbVal);
SQLBindCol(hstmt, 3, SQL_UNICODE_CHAR, szTableName, 128, &cbVal);
SQLBindCol(hstmt, 4, SQL_UNICODE_CHAR, szTableType, 128, &cbVal);
SQLBindCol(hstmt, 5, SQL_UNICODE_CHAR, szRemarks, 255, &cbVal);
#endif
retcode = SQLFetch(hstmt);
if (retcode == SQL_ERROR || retcode == SQL_SUCCESS_WITH_INFO)
ReportSQLError(henv, hdbc, hstmt, retcode, _T("SQLFetch"));
if (retcode != SQL_NO_DATA_FOUND)
m_connectString = (LPTSTR)buf2; // save connection string!
// Subsequent calls to GetTableInfo will be able to
// retrieve this information...
while (retcode != SQL_NO_DATA_FOUND) {
UGStr::tcscpy((LPTSTR)m_dsInfoArray[m_tableCount].tableQualifier,128,(LPTSTR)szTableQualifier);
UGStr::tcscpy((LPTSTR)m_dsInfoArray[m_tableCount].tableOwner,128, (LPTSTR)szTableOwner);
UGStr::tcscpy((LPTSTR)m_dsInfoArray[m_tableCount].tableName,128,(LPTSTR)szTableName);
UGStr::tcscpy((LPTSTR)m_dsInfoArray[m_tableCount].tableType,128,(LPTSTR)szTableType);
UGStr::tcscpy((LPTSTR)m_dsInfoArray[m_tableCount].remarks,255,(LPTSTR)szRemarks);
m_tableCount++;
if (m_tableCount >= MAX_TABLES)
break;
retcode = SQLFetch(hstmt);
}
}
// ----------------------------------------------------------------------------
// 2006-10-23 오전 4:36:18 추가(New), Sun.H.D
// 호출 시점 : Arrow Line
//
// 특 징 :
//
// 매개 변수 :
//
// 리 턴 값 :
// ----------------------------------------------------------------------------
void CArrowLine::Draw(CDC* pDC)
{
CPen aPen;
UINT nType = 0;
CPoint ArrowPoint;
if(!aPen.CreatePen(PS_SOLID, 1, m_clrColor)) {
// Pen creation failed. Close the program
AfxMessageBox("Pen creation failed drawing a curve", MB_OK);
AfxAbort();
}
CPen* pOldPen = pDC->SelectObject(&aPen); // Select the pen
pDC->MoveTo(m_ptStartPoint);
pDC->LineTo(m_ptEndPoint);
if(m_ptStartPoint.y == m_ptEndPoint.y)
nType = 0;
else
nType = 1;
// 수평선
if(nType==0) {
ArrowPoint = m_ptStartPoint;
ArrowPoint.x += m_nArrowSize;
ArrowPoint.y -= m_nArrowSize;
pDC->MoveTo(ArrowPoint);
pDC->LineTo(m_ptStartPoint);
ArrowPoint = m_ptStartPoint;
ArrowPoint.x += m_nArrowSize;
ArrowPoint.y += m_nArrowSize;
pDC->LineTo(ArrowPoint);
ArrowPoint = m_ptEndPoint;
ArrowPoint.x -= m_nArrowSize;
ArrowPoint.y -= m_nArrowSize;
pDC->MoveTo(ArrowPoint);
pDC->LineTo(m_ptEndPoint);
ArrowPoint = m_ptEndPoint;
ArrowPoint.x -= m_nArrowSize;
ArrowPoint.y += m_nArrowSize;
pDC->LineTo(ArrowPoint);
} else { // 수직선
ArrowPoint = m_ptStartPoint;
ArrowPoint.x -= m_nArrowSize;
ArrowPoint.y += m_nArrowSize;
pDC->MoveTo(ArrowPoint);
pDC->LineTo(m_ptStartPoint);
ArrowPoint = m_ptStartPoint;
ArrowPoint.x += m_nArrowSize;
ArrowPoint.y += m_nArrowSize;
pDC->LineTo(ArrowPoint);
ArrowPoint = m_ptEndPoint;
ArrowPoint.x -= m_nArrowSize;
ArrowPoint.y -= m_nArrowSize;
pDC->MoveTo(ArrowPoint);
pDC->LineTo(m_ptEndPoint);
ArrowPoint = m_ptEndPoint;
ArrowPoint.x += m_nArrowSize;
ArrowPoint.y -= m_nArrowSize;
pDC->LineTo(ArrowPoint);
}
pDC->SelectObject(pOldPen); // Restore the old pen
}
static BOOL DoGrowGlobalHandle( HGLOBAL *pHandle, UINT32 OldSize, UINT32 NewSize, UINT32 MoreFlags, LPVOID *Pointer)
{
if (GlobalUnlock( *pHandle ))
{
// if didn't unlock then we won't be able to realloc, so better stop now
TRACE( wxT("GlobalUnlock failed in GrowGlobalHandle\n") );
return FALSE;
}
// get Windows to grab us a new bigger block. Important to use GMEM_MOVEABLE as we want
// our block to move if possible to satisfy the request
HGLOBAL hNewHandle = GlobalReAlloc( *pHandle, NewSize, GMEM_MOVEABLE | MoreFlags );
if (hNewHandle)
{
ADDR NewPtr = (ADDR)GlobalLock( hNewHandle );
if (NewPtr == NULL)
{
// careful here as we really do want to get our old data back - at the moment
// all we have is a handle to an unlocked block of memory. To try and recover the
// situation we'll try setting it back to its old size
hNewHandle = GlobalReAlloc( hNewHandle, OldSize, GMEM_MOVEABLE );
if (hNewHandle)
{
NewPtr = (ADDR)GlobalLock( hNewHandle );
if (NewPtr)
{
// OK, got old data back but might be in different place so tidy up
// then exit gracefully
*Pointer = NewPtr;
*pHandle = hNewHandle;
TRACE( wxT("WARNING: Made hasty exit from GrowGlobalHandle\n") );
return FALSE; // indicate failure
}
}
// this is very catastrophic - we cannot get our old data back, so
// we will communicate this to the user. The program is likely to
// crash and burn after this
TRACE( wxT("DANGER: Catastrophic failure in GrowGlobalHandle\n") );
if (InformSeriousError( _R(IDE_BAD_GROWHEAP), _R(IDS_ABORT), _R(IDS_CONTINUE) ) == 1)
AfxAbort();
return FALSE; // although system is v. unstable
}
TRACEUSER( "Andy", wxT("Handle %x changed to %x (%lx-%lx) (%ld-%ld) %x\n"),
(INT32)*pHandle, (INT32)hNewHandle,
(INT32)*Pointer, (INT32)NewPtr,
(INT32)OldSize, (INT32)NewSize,
(INT32)MoreFlags
);
// we've got our new block, update the callers variables
*Pointer = NewPtr;
*pHandle = hNewHandle;
return TRUE;
}
// couldn't reallocate it, the old one will still be there though
TRACE( wxT("GlobalReAlloc failed in GrowGlobalHandle\n") );
TRACEUSER( "Andy", wxT("Failed to grow handle %x from %ld.%ld at %lx\n"),
(INT32)*pHandle,
(INT32)OldSize,(INT32)NewSize,
(INT32)*Pointer
);
return FALSE;
}
UINT ClientReceiverThreadProc(LPVOID pParam)
{
// Init message window handle
if( pParam == NULL )
return (UINT)-1;
seedRand();
// Copy data from the param to the locals
HWND hwnd = (HWND)pParam;
// Create the listening socket, but do not open it
ListeningSocket listener( hwnd );
// Link event into events array
WSAEVENT aEvents[CLIENTRECEIVER_RESERVED_EVENTS+1];
for( int i = 0; i < CLIENTRECEIVER_RESERVED_EVENTS; i++ )
{
aEvents[i] = WSACreateEvent();
if( aEvents[i] == WSA_INVALID_EVENT )
return (UINT)-1;
}
aEvents[CLIENTRECEIVER_RESERVED_EVENTS] = listener.ReturnEventHandle();
// Critical variables
ListeningSocket::ListenerStatus eCriticalStatus;
// Threaddata variables
ClientReceiverThreadData threadData;
memcpy( threadData.m_aReservedEvents, aEvents, sizeof(WSAEVENT) * CLIENTRECEIVER_RESERVED_EVENTS );
threadData.m_peStatus = &eCriticalStatus;
CCriticalSection criticalSection;
// request initialization of the thread data
::PostMessage( hwnd, WM_LISTENER_INIT_THREAD_DATA, (WPARAM)&criticalSection, (LPARAM)&threadData );
WSANETWORKEVENTS events; // what the fired event data was
DWORD event; // which event fired
char *pLogMsg = NULL;
while(true)
{
event = WSAWaitForMultipleEvents( (CLIENTRECEIVER_RESERVED_EVENTS + 1), aEvents, false, WSA_INFINITE, false );
char buf[16];
_itoa( event, buf, 10 );
if( event == WSA_WAIT_FAILED )
AfxAbort();
// exit event
if( event == 0 )
{
CSingleLock singleLock( &criticalSection, true );
WSAResetEvent( aEvents[event] );
break;
}
// change status
if( event == 1 )
{
CSingleLock singleLock( &criticalSection, true );
switch( eCriticalStatus )
{
case ListeningSocket::OPEN:
listener.Open();
break;
case ListeningSocket::CLOSED:
listener.Close();
break;
}
WSAResetEvent( aEvents[event] );
}
// socket event
if( event >= CLIENTRECEIVER_RESERVED_EVENTS )
{
WSAResetEvent( aEvents[event] );
events = listener.ReturnNetworkEvents();
if(events.lNetworkEvents & FD_CONNECT)
{
listener.OnConnect(events.iErrorCode[FD_CONNECT_BIT]);
}
if(events.lNetworkEvents & FD_READ)
{
while( listener.OnReceive(events.iErrorCode[FD_READ_BIT]) );
}
if(events.lNetworkEvents & FD_WRITE)
{
listener.OnSend(events.iErrorCode[FD_WRITE_BIT]);
}
if(events.lNetworkEvents & FD_CLOSE)
{
listener.OnClose(events.iErrorCode[FD_CLOSE_BIT]);
}
if(events.lNetworkEvents & FD_ACCEPT)
{
listener.OnAccept(events.iErrorCode[FD_ACCEPT_BIT]);
}
}
} // end while(1)
// Close the reserved events
for( int i = 0; i < CLIENTRECEIVER_RESERVED_EVENTS; i++ )
WSACloseEvent( aEvents[i] );
// close the socket
listener.Close();
return 0; // exit the thread
}
