VOID
InitMmu (
VOID
)
{
ARM_MEMORY_REGION_DESCRIPTOR *MemoryTable;
VOID *TranslationTableBase;
UINTN TranslationTableSize;
// Get Virtual Memory Map from the Platform Library
ArmPlatformGetVirtualMemoryMap (&MemoryTable);
//Note: Because we called PeiServicesInstallPeiMemory() before to call InitMmu() the MMU Page Table resides in
// DRAM (even at the top of DRAM as it is the first permanent memory allocation)
ArmConfigureMmu (MemoryTable, &TranslationTableBase, &TranslationTableSize);
}
VOID
InitMmu (
VOID
)
{
ARM_MEMORY_REGION_DESCRIPTOR *MemoryTable;
VOID *TranslationTableBase;
UINTN TranslationTableSize;
RETURN_STATUS Status;
// Get Virtual Memory Map from the Platform Library
ArmPlatformGetVirtualMemoryMap (&MemoryTable);
//Note: Because we called PeiServicesInstallPeiMemory() before to call InitMmu() the MMU Page Table resides in
// DRAM (even at the top of DRAM as it is the first permanent memory allocation)
Status = ArmConfigureMmu (MemoryTable, &TranslationTableBase, &TranslationTableSize);
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "Error: Failed to enable MMU\n"));
}
}
/*++
Routine Description:
Arguments:
FileHandle - Handle of the file being invoked.
PeiServices - Describes the list of possible PEI Services.
Returns:
Status - EFI_SUCCESS if the boot mode could be set
--*/
EFI_STATUS
EFIAPI
MemoryPeim (
IN EFI_PHYSICAL_ADDRESS UefiMemoryBase,
IN UINT64 UefiMemorySize
)
{
ARM_MEMORY_REGION_DESCRIPTOR *MemoryTable;
EFI_RESOURCE_ATTRIBUTE_TYPE ResourceAttributes;
UINT64 ResourceLength;
EFI_PEI_HOB_POINTERS NextHob;
EFI_PHYSICAL_ADDRESS FdTop;
EFI_PHYSICAL_ADDRESS SystemMemoryTop;
EFI_PHYSICAL_ADDRESS ResourceTop;
BOOLEAN Found;
// Get Virtual Memory Map from the Platform Library
ArmPlatformGetVirtualMemoryMap (&MemoryTable);
// Ensure PcdSystemMemorySize has been set
ASSERT (PcdGet64 (PcdSystemMemorySize) != 0);
//
// Now, the permanent memory has been installed, we can call AllocatePages()
//
ResourceAttributes = (
EFI_RESOURCE_ATTRIBUTE_PRESENT |
EFI_RESOURCE_ATTRIBUTE_INITIALIZED |
EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE |
EFI_RESOURCE_ATTRIBUTE_WRITE_COMBINEABLE |
EFI_RESOURCE_ATTRIBUTE_WRITE_THROUGH_CACHEABLE |
EFI_RESOURCE_ATTRIBUTE_WRITE_BACK_CACHEABLE |
EFI_RESOURCE_ATTRIBUTE_TESTED
);
//
// Check if the resource for the main system memory has been declared
//
Found = FALSE;
NextHob.Raw = GetHobList ();
while ((NextHob.Raw = GetNextHob (EFI_HOB_TYPE_RESOURCE_DESCRIPTOR, NextHob.Raw)) != NULL) {
if ((NextHob.ResourceDescriptor->ResourceType == EFI_RESOURCE_SYSTEM_MEMORY) &&
(PcdGet64 (PcdSystemMemoryBase) >= NextHob.ResourceDescriptor->PhysicalStart) &&
(NextHob.ResourceDescriptor->PhysicalStart + NextHob.ResourceDescriptor->ResourceLength <= PcdGet64 (PcdSystemMemoryBase) + PcdGet64 (PcdSystemMemorySize)))
{
Found = TRUE;
break;
}
NextHob.Raw = GET_NEXT_HOB (NextHob);
}
if (!Found) {
// Reserved the memory space occupied by the firmware volume
BuildResourceDescriptorHob (
EFI_RESOURCE_SYSTEM_MEMORY,
ResourceAttributes,
PcdGet64 (PcdSystemMemoryBase),
PcdGet64 (PcdSystemMemorySize)
);
}
//
// Reserved the memory space occupied by the firmware volume
//
SystemMemoryTop = (EFI_PHYSICAL_ADDRESS)PcdGet64 (PcdSystemMemoryBase) + (EFI_PHYSICAL_ADDRESS)PcdGet64 (PcdSystemMemorySize);
FdTop = (EFI_PHYSICAL_ADDRESS)PcdGet64 (PcdFdBaseAddress) + (EFI_PHYSICAL_ADDRESS)PcdGet32 (PcdFdSize);
// EDK2 does not have the concept of boot firmware copied into DRAM. To avoid the DXE
// core to overwrite this area we must mark the region with the attribute non-present
if ((PcdGet64 (PcdFdBaseAddress) >= PcdGet64 (PcdSystemMemoryBase)) && (FdTop <= SystemMemoryTop)) {
Found = FALSE;
// Search for System Memory Hob that contains the firmware
NextHob.Raw = GetHobList ();
while ((NextHob.Raw = GetNextHob (EFI_HOB_TYPE_RESOURCE_DESCRIPTOR, NextHob.Raw)) != NULL) {
if ((NextHob.ResourceDescriptor->ResourceType == EFI_RESOURCE_SYSTEM_MEMORY) &&
(PcdGet64 (PcdFdBaseAddress) >= NextHob.ResourceDescriptor->PhysicalStart) &&
(FdTop <= NextHob.ResourceDescriptor->PhysicalStart + NextHob.ResourceDescriptor->ResourceLength))
{
ResourceAttributes = NextHob.ResourceDescriptor->ResourceAttribute;
ResourceLength = NextHob.ResourceDescriptor->ResourceLength;
ResourceTop = NextHob.ResourceDescriptor->PhysicalStart + ResourceLength;
if (PcdGet64 (PcdFdBaseAddress) == NextHob.ResourceDescriptor->PhysicalStart) {
if (SystemMemoryTop == FdTop) {
NextHob.ResourceDescriptor->ResourceAttribute = ResourceAttributes & ~EFI_RESOURCE_ATTRIBUTE_PRESENT;
} else {
// Create the System Memory HOB for the firmware with the non-present attribute
BuildResourceDescriptorHob (EFI_RESOURCE_SYSTEM_MEMORY,
ResourceAttributes & ~EFI_RESOURCE_ATTRIBUTE_PRESENT,
PcdGet64 (PcdFdBaseAddress),
PcdGet32 (PcdFdSize));
// Top of the FD is system memory available for UEFI
NextHob.ResourceDescriptor->PhysicalStart += PcdGet32(PcdFdSize);
NextHob.ResourceDescriptor->ResourceLength -= PcdGet32(PcdFdSize);
}
} else {
// Create the System Memory HOB for the firmware with the non-present attribute
BuildResourceDescriptorHob (EFI_RESOURCE_SYSTEM_MEMORY,
ResourceAttributes & ~EFI_RESOURCE_ATTRIBUTE_PRESENT,
PcdGet64 (PcdFdBaseAddress),
PcdGet32 (PcdFdSize));
// Update the HOB
NextHob.ResourceDescriptor->ResourceLength = PcdGet64 (PcdFdBaseAddress) - NextHob.ResourceDescriptor->PhysicalStart;
// If there is some memory available on the top of the FD then create a HOB
if (FdTop < NextHob.ResourceDescriptor->PhysicalStart + ResourceLength) {
// Create the System Memory HOB for the remaining region (top of the FD)
BuildResourceDescriptorHob (EFI_RESOURCE_SYSTEM_MEMORY,
ResourceAttributes,
FdTop,
ResourceTop - FdTop);
}
}
Found = TRUE;
break;
}
NextHob.Raw = GET_NEXT_HOB (NextHob);
}
ASSERT(Found);
}
// Build Memory Allocation Hob
InitMmu (MemoryTable);
if (FeaturePcdGet (PcdPrePiProduceMemoryTypeInformationHob)) {
// Optional feature that helps prevent EFI memory map fragmentation.
BuildMemoryTypeInformationHob ();
}
return EFI_SUCCESS;
}
