void
BuffaloGpio_AllLedOff(void)
{
if (BIT_ALARM_LED >= 0) {
BuffaloGpio_AlarmLedDisable();
BuffaloGpio_AlarmLedBlinkDisable();
}
if (BIT_INFO_LED >= 0) {
BuffaloGpio_InfoLedDisable();
BuffaloGpio_InfoLedBlinkDisable();
}
if (BIT_PWR_LED >= 0) {
BuffaloGpio_PowerLedDisable();
BuffaloGpio_PowerLedBlinkDisable();
}
// if (BIT_LED_ETH >= 0) {
// BuffaloGpio_EthLedOff();
// }
if (BIT_FUNC_LED >= 0) {
BuffaloGpio_FuncLedDisable();
BuffaloGpio_FuncLedBlinkDisable();
}
}
//----------------------------------------------------------------------
int __init buffaloLedDriver_init (void)
{
int i;
char buf[1024];
struct proc_dir_entry *pde;
FUNCTRACE(printk("%s > Entered.\n",__FUNCTION__));
BuffaloGpio_Init();
pde = proc_mkdir("buffalo/gpio", 0);
pde = proc_mkdir("buffalo/gpio/led", 0);
pde = proc_mkdir("buffalo/gpio/switch", 0);
pde = proc_mkdir("buffalo/gpio/fan", 0);
pde = proc_mkdir("buffalo/gpio/power_control", 0);
pde = create_proc_info_entry ("buffalo/power_sw", 0, 0, gpio_power_read_proc);
pde = create_proc_entry("buffalo/gpio/led/all", 0, 0);
pde->read_proc = BuffaloAllLedReadProc;
pde->write_proc= BuffaloAllLedWriteProc;
pde = create_proc_entry("buffalo/cpu_status", 0, 0);
pde->read_proc = BuffaloCpuStatusReadProc;
pde->write_proc = BuffaloCpuStatusWriteProc;
if (BIT_LED_ALARM >= 0) {
BuffaloGpio_AlarmLedDisable();
pde = create_proc_entry("buffalo/gpio/led/alarm", 0, 0);
pde->read_proc = BuffaloLedReadProc;
pde->write_proc = BuffaloLedWriteProc;
alarmLed.mppNumber = BIT_LED_ALARM;
pde->data = &alarmLed;
pde = create_proc_entry("buffalo/gpio/led/alarm_blink", 0, 0);
pde->read_proc = BuffaloLedBlinkReadProc;
pde->write_proc = BuffaloLedBlinkWriteProc;
pde->data = &alarmLed;
}
if (BIT_LED_INFO >= 0) {
BuffaloGpio_InfoLedDisable();
pde = create_proc_entry("buffalo/gpio/led/info", 0, 0);
pde->read_proc = BuffaloLedReadProc;
pde->write_proc = BuffaloLedWriteProc;
infoLed.mppNumber = BIT_LED_INFO;
pde->data = &infoLed;
pde = create_proc_entry("buffalo/gpio/led/info_blink", 0, 0);
pde->read_proc = BuffaloLedBlinkReadProc;
pde->write_proc = BuffaloLedBlinkWriteProc;
pde->data = &infoLed;
}
if (BIT_LED_PWR >= 0) {
BuffaloGpio_PowerLedEnable();
pde = create_proc_entry("buffalo/gpio/led/power", 0, 0);
pde->read_proc = BuffaloLedReadProc;
pde->write_proc = BuffaloLedWriteProc;
powerLed.mppNumber = BIT_LED_PWR;
pde->data = &powerLed;
pde = create_proc_entry("buffalo/gpio/led/power_blink", 0, 0);
pde->read_proc = BuffaloLedBlinkReadProc;
pde->write_proc = BuffaloLedBlinkWriteProc;
pde->data = &powerLed;
}
if (BIT_LED_FUNC >= 0) {
BuffaloGpio_FuncLedDisable();
pde = create_proc_entry("buffalo/gpio/led/func", 0, 0);
pde->read_proc = BuffaloLedReadProc;
pde->write_proc = BuffaloLedWriteProc;
funcLed.mppNumber = BIT_LED_FUNC;
pde->data = &funcLed;
pde = create_proc_entry("buffalo/gpio/led/func_blink", 0, 0);
pde->read_proc = BuffaloLedBlinkReadProc;
pde->write_proc = BuffaloLedBlinkWriteProc;
pde->data = &funcLed;
}
if (BIT_LED_ETH >= 0) {
pde = create_proc_entry("buffalo/gpio/led/eth", 0, 0);
pde->read_proc = BuffaloEthLedReadProc;
pde->write_proc = BuffaloEthLedWriteProc;
}
for (i=0; i<BUF_NV_SIZE_BIT_HDD_POWER; i++) {
if (bitHddPower[i] < 0)
continue;
sprintf(buf, "buffalo/gpio/power_control/hdd%d", i);
pde = create_proc_entry(buf, 0, 0);
if (pde != NULL) {
pde->read_proc = BuffaloHddReadProc;
pde->write_proc= BuffaloHddWriteProc;
pde->owner = THIS_MODULE;
pde->data = (void *)i;
}
}
for (i=0; i<BUF_NV_SIZE_BIT_USB_POWER; i++) {
if (bitUsbPower[i] < 0)
continue;
sprintf(buf, "buffalo/gpio/power_control/usb%d", i);
pde = create_proc_entry(buf, 0, NULL);
if (pde != NULL) {
pde->read_proc = BuffaloUsbReadProc;
pde->write_proc = BuffaloUsbWriteProc;
pde->owner = THIS_MODULE;
pde->data = (void *)i;
}
}
if (use_slide_power == 1) {
pde = create_proc_entry("buffalo/gpio/switch/power", 0, 0);
pde->read_proc = BuffaloPowerReadProc;
// pde->write_proc = BuffaloPowerReadProc;
pde = create_proc_info_entry("buffalo/gpio/switch/slide_switch", 0, 0, BuffaloSlideSwitchReadProc);
}
if (BIT_AUTO_POWER >= 0) {
pde = create_proc_entry("buffalo/gpio/switch/auto_power", 0, 0);
pde->read_proc = BuffaloAutoPowerReadProc;
// pde->write_proc = BuffaloAutoPowerReadProc;
}
if (use_slide_power == 1 || BIT_AUTO_POWER >= 0) {
pde = create_proc_entry("buffalo/gpio/switch/sw_control", 0, 0);
pde->read_proc = BuffaloSwPollingReadProc;
pde->write_proc = BuffaloSwPollingWriteProc;
}
if (BIT_FUNC >= 0) {
pde = create_proc_entry("buffalo/gpio/switch/func", 0, 0);
pde->read_proc = BuffaloFuncReadProc;
// pde->write_proc= BuffaloFuncReadProc;
}
if (BIT_FAN_LOW >= 0 && BIT_FAN_HIGH) {
pde = create_proc_entry("buffalo/gpio/fan/control", 0, 0);
pde->read_proc = BuffaloFanControlReadProc;
pde->write_proc= BuffaloFanControlWriteProc;
}
if (BIT_FAN_LCK >= 0) {
pde = create_proc_entry("buffalo/gpio/fan/lock", 0, 0);
pde->read_proc = BuffaloFanStatusReadProc;
pde->write_proc= BuffaloFanStatusWriteProc;
}
pde = create_proc_entry("buffalo/gpio/data_out_register", 0, 0);
pde->read_proc = BuffaloGpioRegisterReadProc;
pde->write_proc= BuffaloGpioRegisterWriteProc;
pde->data = (void *)GPP_DATA_OUT_REG(0);
pde = create_proc_entry("buffalo/gpio/data_out_enable_register", 0, 0);
pde->read_proc = BuffaloGpioRegisterReadProc;
pde->write_proc= BuffaloGpioRegisterWriteProc;
pde->data = (void *)GPP_DATA_OUT_EN_REG(0);
pde = create_proc_entry("buffalo/gpio/blink_enable_register", 0, 0);
pde->read_proc = BuffaloGpioRegisterReadProc;
pde->write_proc= BuffaloGpioRegisterWriteProc;
pde->data = (void *)GPP_BLINK_EN_REG(0);
pde = create_proc_entry("buffalo/gpio/data_in_polarity_register", 0, 0);
pde->read_proc = BuffaloGpioRegisterReadProc;
pde->write_proc= BuffaloGpioRegisterWriteProc;
pde->data = (void *)GPP_DATA_IN_POL_REG(0);
pde = create_proc_entry("buffalo/gpio/data_in_register", 0, 0);
pde->read_proc = BuffaloGpioRegisterReadProc;
pde->write_proc= BuffaloGpioRegisterWriteProc;
pde->data = (void *)GPP_DATA_IN_REG(0);
if (Buffalo_has_PM()) {
for (i=0; i<4; i++) {
sprintf(buf, "buffalo/gpio/power_control/hdd%d", i);
pde = create_proc_entry(buf, 0, 0);
if (pde != NULL) {
pde->read_proc = BuffaloPMHddPowerReadProc;
pde->write_proc= BuffaloPMHddPowerWriteProc;
pde->owner = THIS_MODULE;
pde->data = (void *)i;
}
sprintf(buf, "buffalo/gpio/led/pm_diag_led%d", i);
pde = create_proc_entry(buf, 0, 0);
if (pde != NULL) {
pde->read_proc = BuffaloPMHddDiagLedReadProc;
pde->write_proc= BuffaloPMHddDiagLedWriteProc;
pde->owner = THIS_MODULE;
pde->data = (void *)i;
}
}
}
printk("%s %s Ver.%s installed.\n", DRIVER_NAME, AUTHOR, BUFFALO_DRIVER_VER);
return 0;
}