// Read and create a BRAND NEW MPE LUT from a given profile. All stuff dependent of version, etc
// is adjusted here in order to create a LUT that takes care of all those details
cmsPipeline* _cmsReadInputLUT(cmsHPROFILE hProfile, int Intent)
{
cmsTagTypeSignature OriginalType;
cmsTagSignature tag16 = Device2PCS16[Intent];
cmsTagSignature tagFloat = Device2PCSFloat[Intent];
cmsContext ContextID = cmsGetProfileContextID(hProfile);
if (cmsIsTag(hProfile, tagFloat)) { // Float tag takes precedence
// Floating point LUT are always V4, so no adjustment is required
return cmsPipelineDup((cmsPipeline*) cmsReadTag(hProfile, tagFloat));
}
// Revert to perceptual if no tag is found
if (!cmsIsTag(hProfile, tag16)) {
tag16 = Device2PCS16[0];
}
if (cmsIsTag(hProfile, tag16)) { // Is there any LUT-Based table?
// Check profile version and LUT type. Do the necessary adjustments if needed
// First read the tag
cmsPipeline* Lut = (cmsPipeline*) cmsReadTag(hProfile, tag16);
if (Lut == NULL) return NULL;
// After reading it, we have now info about the original type
OriginalType = _cmsGetTagTrueType(hProfile, tag16);
// The profile owns the Lut, so we need to copy it
Lut = cmsPipelineDup(Lut);
// We need to adjust data only for Lab16 on output
if (OriginalType != cmsSigLut16Type || cmsGetPCS(hProfile) != cmsSigLabData)
return Lut;
// If the input is Lab, add also a conversion at the begin
if (cmsGetColorSpace(hProfile) == cmsSigLabData)
cmsPipelineInsertStage(Lut, cmsAT_BEGIN, _cmsStageAllocLabV4ToV2(ContextID));
// Add a matrix for conversion V2 to V4 Lab PCS
cmsPipelineInsertStage(Lut, cmsAT_END, _cmsStageAllocLabV2ToV4(ContextID));
return Lut;
}
// Lut was not found, try to create a matrix-shaper
// Check if this is a grayscale profile.
if (cmsGetColorSpace(hProfile) == cmsSigGrayData) {
// if so, build appropiate conversion tables.
// The tables are the PCS iluminant, scaled across GrayTRC
return BuildGrayInputMatrixPipeline(hProfile);
}
// Not gray, create a normal matrix-shaper
return BuildRGBInputMatrixShaper(hProfile);
}
// Read and create a BRAND NEW MPE LUT from a given profile. All stuff dependent of version, etc
// is adjusted here in order to create a LUT that takes care of all those details.
// We add intent = -1 as a way to read matrix shaper always, no matter of other LUT
cmsPipeline* _cmsReadInputLUT(cmsHPROFILE hProfile, int Intent)
{
cmsTagTypeSignature OriginalType;
cmsTagSignature tag16;
cmsTagSignature tagFloat;
cmsContext ContextID = cmsGetProfileContextID(hProfile);
// On named color, take the appropriate tag
if (cmsGetDeviceClass(hProfile) == cmsSigNamedColorClass) {
cmsPipeline* Lut;
cmsNAMEDCOLORLIST* nc = (cmsNAMEDCOLORLIST*) cmsReadTag(hProfile, cmsSigNamedColor2Tag);
if (nc == NULL) return NULL;
Lut = cmsPipelineAlloc(ContextID, 0, 0);
if (Lut == NULL) {
cmsFreeNamedColorList(nc);
return NULL;
}
if (!cmsPipelineInsertStage(Lut, cmsAT_BEGIN, _cmsStageAllocNamedColor(nc, TRUE)) ||
!cmsPipelineInsertStage(Lut, cmsAT_END, _cmsStageAllocLabV2ToV4(ContextID))) {
cmsPipelineFree(Lut);
return NULL;
}
return Lut;
}
// This is an attempt to reuse this function to retrieve the matrix-shaper as pipeline no
// matter other LUT are present and have precedence. Intent = -1 means just this.
if (Intent >= INTENT_PERCEPTUAL && Intent <= INTENT_ABSOLUTE_COLORIMETRIC) {
tag16 = Device2PCS16[Intent];
tagFloat = Device2PCSFloat[Intent];
if (cmsIsTag(hProfile, tagFloat)) { // Float tag takes precedence
// Floating point LUT are always V4, but the encoding range is no
// longer 0..1.0, so we need to add an stage depending on the color space
return _cmsReadFloatInputTag(hProfile, tagFloat);
}
// Revert to perceptual if no tag is found
if (!cmsIsTag(hProfile, tag16)) {
tag16 = Device2PCS16[0];
}
if (cmsIsTag(hProfile, tag16)) { // Is there any LUT-Based table?
// Check profile version and LUT type. Do the necessary adjustments if needed
// First read the tag
cmsPipeline* Lut = (cmsPipeline*) cmsReadTag(hProfile, tag16);
if (Lut == NULL) return NULL;
// After reading it, we have now info about the original type
OriginalType = _cmsGetTagTrueType(hProfile, tag16);
// The profile owns the Lut, so we need to copy it
Lut = cmsPipelineDup(Lut);
// We need to adjust data only for Lab16 on output
if (OriginalType != cmsSigLut16Type || cmsGetPCS(hProfile) != cmsSigLabData)
return Lut;
// If the input is Lab, add also a conversion at the begin
if (cmsGetColorSpace(hProfile) == cmsSigLabData &&
!cmsPipelineInsertStage(Lut, cmsAT_BEGIN, _cmsStageAllocLabV4ToV2(ContextID)))
goto Error;
// Add a matrix for conversion V2 to V4 Lab PCS
if (!cmsPipelineInsertStage(Lut, cmsAT_END, _cmsStageAllocLabV2ToV4(ContextID)))
goto Error;
return Lut;
Error:
cmsPipelineFree(Lut);
return NULL;
}
}
// Lut was not found, try to create a matrix-shaper
// Check if this is a grayscale profile.
if (cmsGetColorSpace(hProfile) == cmsSigGrayData) {
// if so, build appropriate conversion tables.
// The tables are the PCS iluminant, scaled across GrayTRC
return BuildGrayInputMatrixPipeline(hProfile);
}
// Not gray, create a normal matrix-shaper
return BuildRGBInputMatrixShaper(hProfile);
}
