static void fdma_reset_channels(struct fdma *fdma)
{
int chan_num;
for (chan_num = fdma->ch_min; chan_num <= fdma->ch_max; chan_num++)
writel(0, CMD_STAT_REG(chan_num));
}
static inline void fdma_handle_fdma_err_irq(struct fdma_channel *channel)
{
struct fdma *fdma = channel->fdma;
void (*err_cb)(unsigned long) = channel->params->err_cb;
unsigned long err_cb_parm = channel->params->err_cb_parm;
spin_lock(&fdma->channels_lock);
/* err is bits 2-4 */
fdma_dbg(fdma, "%s: FDMA error %d on channel %d\n", __FUNCTION__,
(readl(CMD_STAT_REG(channel->chan_num)) >> 2) & 0x7,
channel->chan_num);
/* According to the spec, in case of error transfer "may be
* aborted" (or may not be, sigh) so let's make the situation
* clear and stop it explicitly now. */
writel(MBOX_CMD_PAUSE_CHANNEL << (channel->chan_num * 2),
fdma->io_base + fdma->regs.cmd_set);
channel->sw_state = FDMA_STOPPING;
spin_unlock(&fdma->channels_lock);
wake_up(&channel->dma_chan->wait_queue);
if (err_cb) {
if (channel->params->err_cb_isr)
err_cb(err_cb_parm);
else
tasklet_schedule(&channel->fdma_error);
}
}
static int st_fdma_debugfs_chan_show(struct seq_file *m, void *v)
{
struct st_fdma_chan *fchan = m->private;
char buffer[80];
int i;
seq_printf(m, "--- %s (0x%p) channel %d (%s) ---\n",
dev_name(fchan->fdev->dev), fchan->fdev->io_base,
fchan->id, st_fdma_debugfs_fchan_state[fchan->state]);
SEQ_PRINTF(m, "CMD_STAT", CMD_STAT_REG(fchan));
SEQ_PRINTF(m, "PTR", NODE_PTR_REG(fchan));
SEQ_PRINTF(m, "CTRL", NODE_CTRL_REG(fchan));
SEQ_PRINTF(m, "COUNT", NODE_COUNT_REG(fchan));
SEQ_PRINTF(m, "SADDR", NODE_SADDR_REG(fchan));
SEQ_PRINTF(m, "DADDR", NODE_DADDR_REG(fchan));
switch (fchan->type) {
case ST_DMA_TYPE_TELSS:
SEQ_PRINTF(m, "NPARAM", NODE_TELSS_NODE_PARAM_REG(fchan));
for (i = 0; i < ST_FDMA_LLU_TELSS_HANDSETS; ++i) {
sprintf(buffer, "HPARAM[%d]", i);
SEQ_PRINTF(m, buffer,
NODE_TELSS_HANDSET_PARAMn_REG(fchan, i));
}
break;
case ST_DMA_TYPE_MCHI:
SEQ_PRINTF(m, "MCHI_LENGTH", NODE_MCHI_LENGTH_REG(fchan));
SEQ_PRINTF(m, "MCHI_RX_FIFO_THR_ADDR",
NODE_MCHI_RX_FIFO_THR_ADDR_REG(fchan));
SEQ_PRINTF(m, "MCHI_DSTRIDE", NODE_MCHI_DSTRIDE_REG(fchan));
break;
default:
/* No additional registers to print */
break;
}
if (fchan->dreq) {
sprintf(buffer, "REQ_CONTROL[%d]", fchan->dreq->request_line);
SEQ_PRINTF(m, buffer,
REQ_CONTROLn_REG(fchan->fdev,
fchan->dreq->request_line));
sprintf(buffer, "TRANSFER DIRECTION");
seq_printf(m, "%-30s = %s\n", buffer,
st_fdma_debugfs_direction[fchan->dreq->direction]);
}
seq_printf(m, "\n");
return 0;
}
static inline void fdma_handle_fdma_completion_irq(struct fdma_channel *channel)
{
struct fdma *fdma = channel->fdma;
void (*comp_cb)(unsigned long) = channel->params->comp_cb;
unsigned long comp_cb_parm = channel->params->comp_cb_parm;
spin_lock(&fdma->channels_lock);
switch (fdma_get_engine_status(channel)) {
case FDMA_CHANNEL_PAUSED:
switch (channel->sw_state) {
case FDMA_RUNNING: /* Hit a pause node */
case FDMA_PAUSING:
channel->sw_state = FDMA_PAUSED;
break;
case FDMA_STOPPING:
writel(0, CMD_STAT_REG(channel->chan_num));
channel->sw_state = FDMA_IDLE;
break;
default:
BUG();
}
break;
case FDMA_CHANNEL_IDLE:
switch (channel->sw_state) {
case FDMA_RUNNING:
case FDMA_PAUSING:
case FDMA_STOPPING:
channel->sw_state = FDMA_IDLE;
break;
default:
BUG();
}
break;
case FDMA_CHANNEL_RUNNING:
break;
default:
fdma_dbg(fdma, "ERR::FDMA2 unknown interrupt status \n");
}
spin_unlock(&fdma->channels_lock);
wake_up(&channel->dma_chan->wait_queue);
if (comp_cb) {
if (channel->params->comp_cb_isr)
comp_cb(comp_cb_parm);
else
tasklet_schedule(&channel->fdma_complete);
}
}
static void fdma_start_channel(struct fdma_channel *channel,
unsigned long start_addr, unsigned long initial_count)
{
struct fdma *fdma = channel->fdma;
u32 cmd_sta_value = (start_addr | CMDSTAT_FDMA_START_CHANNEL);
/* See comment in fdma_get_residue() for why we do this. */
writel(initial_count, fdma->io_base + (channel->chan_num *
NODE_DATA_OFFSET) + fdma->regs.cntn);
writel(cmd_sta_value, CMD_STAT_REG(channel->chan_num));
writel(MBOX_CMD_START_CHANNEL << (channel->chan_num * 2),
fdma->io_base + fdma->regs.cmd_set);
}
/* must only be called when channel is in paused state */
static int fdma_unpause(struct fdma_channel *channel)
{
struct fdma *fdma = channel->fdma;
unsigned long irqflags = 0;
u32 cmd_sta_value;
spin_lock_irqsave(&fdma->channels_lock, irqflags);
if (channel->sw_state != FDMA_PAUSED) {
spin_unlock_irqrestore(&fdma->channels_lock, irqflags);
return -EBUSY;
}
cmd_sta_value = readl(CMD_STAT_REG(channel->chan_num));
cmd_sta_value &= ~CMDSTAT_FDMA_CMD_MASK;
cmd_sta_value |= CMDSTAT_FDMA_RESTART_CHANNEL;
writel(cmd_sta_value, CMD_STAT_REG(channel->chan_num));
writel(MBOX_CMD_START_CHANNEL << (channel->chan_num * 2),
fdma->io_base + fdma->regs.cmd_set);
channel->sw_state = FDMA_RUNNING;
spin_unlock_irqrestore(&fdma->channels_lock, irqflags);
return 0;
}
static int fdma_stop(struct fdma_channel *channel)
{
struct fdma *fdma = channel->fdma;
unsigned long cmd_val = MBOX_CMD_PAUSE_CHANNEL <<
(channel->chan_num * 2);
unsigned long irqflags = 0;
spin_lock_irqsave(&fdma->channels_lock, irqflags);
switch (channel->sw_state) {
case FDMA_IDLE:
case FDMA_CONFIGURED:
case FDMA_PAUSED:
/* Hardware is already idle, simply change state */
channel->sw_state = FDMA_IDLE;
writel(0, CMD_STAT_REG(channel->chan_num));
spin_unlock_irqrestore(&fdma->channels_lock, irqflags);
break;
case FDMA_RUNNING:
/* Hardware is running, send the command */
writel(cmd_val, fdma->io_base + fdma->regs.cmd_set);
/* Fall through */
case FDMA_PAUSING:
case FDMA_STOPPING:
/* Hardware is pausing already, wait for interrupt */
channel->sw_state = FDMA_STOPPING;
spin_unlock_irqrestore(&fdma->channels_lock, irqflags);
#if 0
/* In some cases this is called from a context which cannot
* block, so disable the wait at the moment. */
wait_event(channel->cur_cfg->wait_queue,
channel->sw_state == FDMA_IDLE);
#endif
break;
}
return 0;
}
/* returns the number of bytes left to transfer for the current node */
static int fdma_get_residue(struct dma_channel *dma_chan)
{
struct fdma_channel *channel = dma_chan->priv_data;
struct fdma *fdma = channel->fdma;
struct stm_dma_params *params = channel->params;
unsigned long irqflags;
u32 count = 0;
spin_lock_irqsave(&fdma->channels_lock, irqflags);
if (likely(channel->sw_state != FDMA_IDLE)) {
struct fdma_xfer_descriptor *desc =
(struct fdma_xfer_descriptor *)params->priv;
void __iomem *chan_base = fdma->io_base +
(channel->chan_num * NODE_DATA_OFFSET);
unsigned long current_node_phys;
unsigned long stat1, stat2;
struct fdma_llu_node *current_node;
int node_num;
/* Get info about current node */
do {
stat1 = readl(CMD_STAT_REG(channel->chan_num));
count = readl(chan_base + fdma->regs.cntn);
stat2 = readl(CMD_STAT_REG(channel->chan_num));
} while (stat1 != stat2);
current_node_phys = stat1 & ~0x1f;
for (node_num = 0, current_node = desc->llu_nodes;
current_node->dma_addr != current_node_phys;
node_num++, current_node++)
BUG_ON(node_num == desc->alloced_nodes);
switch (stat1 & 3) {
case FDMA_CHANNEL_IDLE:
/* Channel has stopped, but we haven't taken
* the interrupt to change the ->sw_state
* field yet. We could legitimatly return zero
* here, but instead pretend we haven't quite
* finished yet. Is this the right thing to
* do? */
count = 1;
goto unlock;
case FDMA_CHANNEL_RUNNING:
case FDMA_CHANNEL_PAUSED:
/* Unfortuntaly the firmware appears to modify
* CMD_STAT before it has modifed the COUNT.
* However we write the count in
* fdma_start_channel() so can assume it is
* valid. */
break;
case CMDSTAT_FDMA_START_CHANNEL:
/* Channel hasn't started running yet, so count
* hasn't yet been loaded from the node. But again
* the value was written in fdma_start_channel()
* so the value read from hardware is valid. */
break;
}
while (++node_num < desc->alloced_nodes) {
current_node++;
count += current_node->virt_addr->size_bytes;
}
}
unlock:
spin_unlock_irqrestore(&fdma->channels_lock, irqflags);
return count;
}
static int fdma_get_engine_status(struct fdma_channel *channel)
{
struct fdma *fdma = channel->fdma;
return readl(CMD_STAT_REG(channel->chan_num)) & 3;
}
