/*
** Enable all the peripherals in use
*/
static void PeripheralsSetUp(void)
{
DMTimer2ModuleClkConfig();
DMTimer3ModuleClkConfig();
DMTimer4ModuleClkConfig();
RTCModuleClkConfig();
CPSWPinMuxSetup();
CPSWClkEnable();
EDMAModuleClkConfig();
GPIO1ModuleClkConfig();
GPIO1Pin23PinMuxSetup();
HSMMCSDPinMuxSetup();
HSMMCSDModuleClkConfig();
}
/*
** Enable all the peripherals in use
*/
static void PeripheralsSetUp(void)
{
enableModuleClock(CLK_UART0);
enableModuleClock(CLK_I2C0);
/* Timer6 is used for Standby wakeup */
enableModuleClock(CLK_TIMER6);
GPIO0ModuleClkConfig();
DMTimer2ModuleClkConfig();
DMTimer3ModuleClkConfig();
DMTimer4ModuleClkConfig();
RTCModuleClkConfig();
CPSWPinMuxSetup();
CPSWClkEnable();
EDMAModuleClkConfig();
GPIO1ModuleClkConfig();
GPIO1Pin23PinMuxSetup();
HSMMCSDPinMuxSetup();
HSMMCSDModuleClkConfig();
I2CPinMuxSetup(0);
}
/*
** The main function
*/
int main(void)
{
unsigned int ipAddr;
LWIP_IF lwipIfPort1, lwipIfPort2;
MMUConfigAndEnable();
#ifdef LWIP_CACHE_ENABLED
CacheEnable(CACHE_ALL);
#endif
CPSWPinMuxSetup();
CPSWClkEnable();
/* Initialize console for communication with the Host Machine */
ConsoleUtilsInit();
/* Select the console type based on compile time check */
ConsoleUtilsSetType(CONSOLE_UART);
/* Chip configuration RGMII selection */
EVMPortMIIModeSelect();
/* Get the MAC address */
EVMMACAddrGet(0, lwipIfPort1.macArray);
EVMMACAddrGet(1, lwipIfPort2.macArray);
AintcCPSWIntrSetUp();
//DelayTimerSetup();
ConsoleUtilsPrintf("\n\rStarterWare Ethernet Echo Application. \n\r\n\r" );
ConsoleUtilsPrintf("Acquiring IP Address for Port 1... \n\r" );
#if STATIC_IP_ADDRESS_PORT1
lwipIfPort1.instNum = 0;
lwipIfPort1.slvPortNum = 1;
lwipIfPort1.ipAddr = STATIC_IP_ADDRESS_PORT1;
lwipIfPort1.netMask = 0;
lwipIfPort1.gwAddr = 0;
lwipIfPort1.ipMode = IPADDR_USE_STATIC;
ipAddr = lwIPInit(&lwipIfPort1);
#else
lwipIfPort1.instNum = 0;
lwipIfPort1.slvPortNum = 1;
lwipIfPort1.ipAddr = 0;
lwipIfPort1.netMask = 0;
lwipIfPort1.gwAddr = 0;
lwipIfPort1.ipMode = IPADDR_USE_DHCP;
ipAddr = lwIPInit(&lwipIfPort1);
#endif
if(ipAddr)
{
ConsoleUtilsPrintf("\n\r\n\rPort 1 IP Address Assigned: ");
IpAddrDisplay(ipAddr);
}
else
{
ConsoleUtilsPrintf("\n\r\n\rPort 1 IP Address Acquisition Failed.");
}
/* Initialize the sample httpd server. */
echo_init();
/* Loop forever. All the work is done in interrupt handlers. */
while(1)
{
; /* Perform nothing */
}
}
/**
* @brief Initializes low level device.
*
*/
static inline void cpswInit(void)
{
CPSWPinMuxSetup();
CPSWClkEnable();
}