/* This routine will be called by the PortAudio engine when audio is needed.
** It may called at interrupt level on some machines so don't do anything
** that could mess up the system like calling malloc() or free().
*/
static int patestCallback( void *inputBuffer, void *outputBuffer,
unsigned long framesPerBuffer,
PaTimestamp outTime, void *userData )
{
paTestData *data = (paTestData*)userData;
float *out = (float*)outputBuffer;
unsigned long i;
int finished = 0;
(void) outTime; /* Prevent unused variable warnings. */
(void) inputBuffer;
for( i=0; i<framesPerBuffer; i++ )
{
*out++ = LookupSine(data, data->left_phase); /* left */
*out++ = LookupSine(data, data->right_phase); /* right */
data->left_phase += data->phase_increment;
if( data->left_phase >= 1.0f ) data->left_phase -= 1.0f;
data->right_phase += (data->phase_increment * 1.5f); /* fifth above */
if( data->right_phase >= 1.0f ) data->right_phase -= 1.0f;
/* sweep frequency then start over. */
data->phase_increment *= FREQ_SCALAR;
if( data->phase_increment > CalcPhaseIncrement(MAX_FREQ) ) data->phase_increment = CalcPhaseIncrement(MIN_FREQ);
}
return 0;
}
int main(void)
{
PortAudioStream *stream;
PaError err;
paTestData data;
int i;
int totalSamps;
printf("PortAudio Test: output sine sweep. ask for %d buffers\n", NUM_BUFFERS );
/* initialise sinusoidal wavetable */
for( i=0; i<TABLE_SIZE; i++ )
{
data.sine[i] = (float) sin( ((double)i/(double)TABLE_SIZE) * M_PI * 2. );
}
data.sine[TABLE_SIZE] = data.sine[0]; // set guard point
data.left_phase = data.right_phase = 0.0;
data.phase_increment = CalcPhaseIncrement(MIN_FREQ);
data.framesToGo = totalSamps = NUM_SECONDS * SAMPLE_RATE; /* Play for a few seconds. */
printf("totalSamps = %d\n", totalSamps );
err = Pa_Initialize();
if( err != paNoError ) goto error;
printf("PortAudio Test: output device = %d\n", OUTPUT_DEVICE );
err = Pa_OpenStream(
&stream,
paNoDevice,
0, /* no input */
paFloat32, /* 32 bit floating point input */
NULL,
OUTPUT_DEVICE,
2, /* stereo output */
paFloat32, /* 32 bit floating point output */
NULL,
SAMPLE_RATE,
FRAMES_PER_BUFFER,
NUM_BUFFERS, /* number of buffers, if zero then use default minimum */
paClipOff|paDitherOff, /* we won't output out of range samples so don't bother clipping them */
patestCallback,
&data );
if( err != paNoError ) goto error;
err = Pa_StartStream( stream );
if( err != paNoError ) goto error;
printf("Is callback being called?\n");
for( i=0; i<((NUM_SECONDS+1)*1000); i+=SLEEP_DUR )
{
printf("data.framesToGo = %d\n", data.framesToGo ); fflush(stdout);
Pa_Sleep( SLEEP_DUR );
}
/* Stop sound until ENTER hit. */
printf("Call Pa_StopStream()\n");
err = Pa_StopStream( stream );
if( err != paNoError ) goto error;
Pa_Terminate();
printf("Test finished.\n");
return err;
error:
Pa_Terminate();
fprintf( stderr, "An error occured while using the portaudio stream\n" );
fprintf( stderr, "Error number: %d\n", err );
fprintf( stderr, "Error message: %s\n", Pa_GetErrorText( err ) );
return err;
}
/* This routine will be called by the PortAudio engine when audio is needed.
** It may called at interrupt level on some machines so don't do anything
** that could mess up the system like calling malloc() or free().
*/
static int patestCallback( void *inputBuffer, void *outputBuffer,
unsigned long framesPerBuffer,
PaTimestamp outTime, void *userData )
{
paTestData *data = (paTestData*)userData;
float *out = (float*)outputBuffer;
int framesToCalc;
int i;
int finished = 0;
(void) outTime; /* Prevent unused variable warnings. */
(void) inputBuffer;
if( data->framesToGo < framesPerBuffer )
{
framesToCalc = data->framesToGo;
data->framesToGo = 0;
finished = 1;
}
else
{
framesToCalc = framesPerBuffer;
data->framesToGo -= framesPerBuffer;
}
for( i=0; i<framesToCalc; i++ )
{
*out++ = LookupSine(data, data->left_phase); /* left */
*out++ = LookupSine(data, data->right_phase); /* right */
data->left_phase += data->phase_increment;
if( data->left_phase >= 1.0f ) data->left_phase -= 1.0f;
data->right_phase += (data->phase_increment * 1.5f); /* fifth above */
if( data->right_phase >= 1.0f ) data->right_phase -= 1.0f;
/* sweep frequency then start over. */
data->phase_increment *= FREQ_SCALAR;
if( data->phase_increment > CalcPhaseIncrement(MAX_FREQ) ) data->phase_increment = CalcPhaseIncrement(MIN_FREQ);
}
/* zero remainder of final buffer */
for( ; i<(int)framesPerBuffer; i++ )
{
*out++ = 0; /* left */
*out++ = 0; /* right */
}
// Pa_Sleep( 3 * MSEC_PER_BUFFER / 4 );
// Pa_Sleep( MSEC_PER_BUFFER / 3 );
return finished;
}
PaError TestStart( PortAudioStream **streamPtr, PaDeviceID devID, paTestData *data )
{
PortAudioStream *stream;
PaError err;
int i;
/* initialise sinusoidal wavetable */
for( i=0; i<TABLE_SIZE; i++ )
{
data->sine[i] = (float) sin( ((double)i/(double)TABLE_SIZE) * M_PI * 2. );
}
data->sine[TABLE_SIZE] = data->sine[0]; // set guard point
data->left_phase = data->right_phase = 0.0;
data->phase_increment = CalcPhaseIncrement(MIN_FREQ);
printf("PortAudio Test: output device = %d\n", devID );
err = Pa_OpenStream(
&stream,
paNoDevice,
0, /* no input */
paFloat32, /* 32 bit floating point input */
NULL,
devID,
2, /* stereo output */
paFloat32, /* 32 bit floating point output */
NULL,
SAMPLE_RATE,
FRAMES_PER_BUFFER,
NUM_BUFFERS, /* number of buffers, if zero then use default minimum */
paClipOff|paDitherOff, /* we won't output out of range samples so don't bother clipping them */
patestCallback,
data );
if( err != paNoError ) goto error;
err = Pa_StartStream( stream );
if( err != paNoError ) goto error;
*streamPtr = stream;
return 0;
error:
return err;
}
int main(void)
{
PaStream *stream;
PaStreamParameters outputParameters;
PaError err;
paTestData data;
int i;
int done = 0;
printf("PortAudio Test: enter letter then hit ENTER.\n" );
/* initialise sinusoidal wavetable */
for( i=0; i<TABLE_SIZE; i++ )
{
data.sine[i] = 0.90f * (float) sin( ((double)i/(double)TABLE_SIZE) * M_PI * 2. );
}
data.sine[TABLE_SIZE] = data.sine[0]; /* set guard point. */
data.left_phase = data.right_phase = 0.0;
data.phase_increment = CalcPhaseIncrement(MIN_FREQ);
err = Pa_Initialize();
if( err != paNoError ) goto error;
printf("PortAudio Test: output device = %d\n", OUTPUT_DEVICE );
outputParameters.device = OUTPUT_DEVICE;
outputParameters.channelCount = 2; /* stereo output */
outputParameters.sampleFormat = paFloat32; /* 32 bit floating point output */
outputParameters.suggestedLatency = Pa_GetDeviceInfo( outputParameters.device )->defaultLowOutputLatency;
outputParameters.hostApiSpecificStreamInfo = NULL;
printf("Requested output latency = %.4f seconds.\n", outputParameters.suggestedLatency );
printf("%d frames per buffer.\n.", FRAMES_PER_BUFFER );
err = Pa_OpenStream(
&stream,
NULL, /* no input */
&outputParameters,
SAMPLE_RATE,
FRAMES_PER_BUFFER,
paClipOff|paDitherOff, /* we won't output out of range samples so don't bother clipping them */
patestCallback,
&data );
if( err != paNoError ) goto error;
err = Pa_StartStream( stream );
if( err != paNoError ) goto error;
printf("Play ASCII keyboard. Hit 'q' to stop. (Use RETURN key on Mac)\n");
fflush(stdout);
while ( !done )
{
float freq;
int index;
char c;
do
{
c = getchar();
}
while( c < ' '); /* Strip white space and control chars. */
if( c == 'q' ) done = 1;
index = c % 26;
freq = MIN_FREQ + (index * 40.0);
data.phase_increment = CalcPhaseIncrement(freq);
}
printf("Call Pa_StopStream()\n");
err = Pa_StopStream( stream );
if( err != paNoError ) goto error;
Pa_Terminate();
printf("Test finished.\n");
return err;
error:
Pa_Terminate();
fprintf( stderr, "An error occured while using the portaudio stream\n" );
fprintf( stderr, "Error number: %d\n", err );
fprintf( stderr, "Error message: %s\n", Pa_GetErrorText( err ) );
return err;
}
int main(void)
{
PortAudioStream *stream;
PaError err;
paTestData data;
int i;
int done = 0;
printf("PortAudio Test: enter letter then hit ENTER. numBuffers = %d\n", NUM_BUFFERS );
/* initialise sinusoidal wavetable */
for( i=0; i<TABLE_SIZE; i++ )
{
data.sine[i] = 0.90f * (float) sin( ((double)i/(double)TABLE_SIZE) * M_PI * 2. );
}
data.sine[TABLE_SIZE] = data.sine[0]; // set guard point
data.left_phase = data.right_phase = 0.0;
data.phase_increment = CalcPhaseIncrement(MIN_FREQ);
err = Pa_Initialize();
if( err != paNoError ) goto error;
printf("PortAudio Test: output device = %d\n", OUTPUT_DEVICE );
err = Pa_OpenStream(
&stream,
paNoDevice,
0, /* no input */
paFloat32, /* 32 bit floating point input */
NULL,
OUTPUT_DEVICE,
2, /* stereo output */
paFloat32, /* 32 bit floating point output */
NULL,
SAMPLE_RATE,
FRAMES_PER_BUFFER,
NUM_BUFFERS, /* number of buffers, if zero then use default minimum */
paClipOff|paDitherOff, /* we won't output out of range samples so don't bother clipping them */
patestCallback,
&data );
if( err != paNoError ) goto error;
err = Pa_StartStream( stream );
if( err != paNoError ) goto error;
printf("Play ASCII keyboard. Hit 'q' to stop. (Use RETURN key on Mac)\n");
fflush(stdout);
while ( !done )
{
float freq;
int index;
char c;
do
{
c = getchar();
}
while( c < ' '); /* Strip white space and control chars. */
if( c == 'q' ) done = 1;
index = c % 26;
freq = MIN_FREQ + (index * 40.0);
data.phase_increment = CalcPhaseIncrement(freq);
}
printf("Call Pa_StopStream()\n");
err = Pa_StopStream( stream );
if( err != paNoError ) goto error;
Pa_Terminate();
printf("Test finished.\n");
return err;
error:
Pa_Terminate();
fprintf( stderr, "An error occured while using the portaudio stream\n" );
fprintf( stderr, "Error number: %d\n", err );
fprintf( stderr, "Error message: %s\n", Pa_GetErrorText( err ) );
return err;
}