// Cohen–Sutherland clipping algorithm clips a line from
// P0 = (x0, y0) to P1 = (x1, y1) against a rectangle with
// diagonal from (xmin, ymin) to (xmax, ymax).
bool Graph::Clip(Line &r) const
{
// compute outcodes for P0, P1, and whatever point lies outside the clip rectangle
uint8_t ca = ComputeOutCode(r.a);
uint8_t cb = ComputeOutCode(r.b);
for (;;)
{
if (!(ca | cb))
{
// Bitwise OR is 0. Trivially accept and get out of loop
return true;
}
else if (ca & cb)
{
// Bitwise AND is not 0. Trivially reject and get out of loop
return false;
}
else
{
// failed both tests, so calculate the line segment to clip
// from an outside point to an intersection with clip edge
// At least one endpoint is outside the clip rectangle; pick it.
uint8_t c = ca ? ca : cb;
// Now find the intersection point;
// use formulas y = y0 + slope * (x - x0), x = x0 + (1 / slope) * (y - y0)
Point p;
if (c & TOP) { // point is above the clip rectangle
p.x = r.a.x + (r.b.x - r.a.x) * (_view->b.y - r.a.y) / (r.b.y - r.a.y);
p.y = _view->b.y;
} else if (c & BOTTOM) { // point is below the clip rectangle
p.x = r.a.x + (r.b.x - r.a.x) * (_view->a.y - r.a.y) / (r.b.y - r.a.y);
p.y = _view->a.y;
} else if (c & RIGHT) { // point is to the right of clip rectangle
p.y = r.a.y + (r.b.y - r.a.y) * (_view->b.x - r.a.x) / (r.b.x - r.a.x);
p.x = _view->b.x;
} else { // point is to the left of clip rectangle
p.y = r.a.y + (r.b.y - r.a.y) * (_view->a.x - r.a.x) / (r.b.x - r.a.x);
p.x = _view->a.x;
}
// Now we move outside point to intersection point to clip
// and get ready for next pass.
if (c == ca) {
r.a = p;
ca = ComputeOutCode(r.a);
} else {
r.b = p;
cb = ComputeOutCode(r.b);
}
}
}
}
// Cohen–Sutherland clipping algorithm clips a line from
// P0 = (x0, y0) to P1 = (x1, y1) against a rectangle with
// diagonal from (xmin, ymin) to (xmax, ymax).
void drawline(rgbData data[][WIDTH], int x0, int y0, int x1, int y1,
struct rgbData color) {
// compute outcodes for P0, P1, and whatever point lies outside the clip rectangle
OutCode outcode0 = ComputeOutCode(x0, y0);
OutCode outcode1 = ComputeOutCode(x1, y1);
bool accept = false;
while (true) {
if (!(outcode0 | outcode1)) { // Bitwise OR is 0. Trivially accept and get out of loop
accept = true;
break;
} else if (outcode0 & outcode1) { // Bitwise AND is not 0. Trivially reject and get out of loop
break;
} else {
// failed both tests, so calculate the line segment to clip
// from an outside point to an intersection with clip edge
double x, y;
// At least one endpoint is outside the clip rectangle; pick it.
OutCode outcodeOut = outcode0 ? outcode0 : outcode1;
// Now find the intersection point;
// use formulas y = y0 + slope * (x - x0), x = x0 + (1 / slope) * (y - y0)
if (outcodeOut & TOP) { // point is above the clip rectangle
x = x0 + (x1 - x0) * (HEIGHT - 1 - y0) / (double)(y1 - y0);
y = HEIGHT - 1;
} else if (outcodeOut & BOTTOM) { // point is below the clip rectangle
x = x0 + (x1 - x0) * (0 - y0) / (double)(y1 - y0);
y = 0;
} else if (outcodeOut & RIGHT) { // point is to the right of clip rectangle
y = y0 + (y1 - y0) * (WIDTH - 1 - x0) / (double)(x1 - x0);
x = WIDTH - 1;
} else if (outcodeOut & LEFT) { // point is to the left of clip rectangle
y = y0 + (y1 - y0) * (0 - x0) / (double)(x1 - x0);
x = 0;
}
// Now we move outside point to intersection point to clip
// and get ready for next pass.
if (outcodeOut == outcode0) {
x0 = (int)x;
y0 = (int)y;
outcode0 = ComputeOutCode(x0, y0);
} else {
x1 = (int)x;
y1 = (int)y;
outcode1 = ComputeOutCode(x1, y1);
}
}
}
if (accept)
drawlineUnsafe(data, x0, y0, x1, y1, color);
}
// http://en.wikipedia.org/wiki/Cohen%E2%80%93Sutherland
// Cohen–Sutherland clipping algorithm clips a line from
// P0 = (x0, y0) to P1 = (x1, y1) against a rectangle with
// diagonal from (xmin, ymin) to (xmax, ymax).
//void CohenSutherlandLineClipAndDraw(
void dDrawLine(unsigned char A[],double x0, double y0, double x1, double y1, int RayNumber, int color )
{
// compute outcodes for P0, P1, and whatever point lies outside the clip rectangle
int outcode0 = ComputeOutCode(x0, y0);
int outcode1 = ComputeOutCode(x1, y1);
int accept = 0;
unsigned int ix0, iy0; // screen coordinate = indices of virtual 2D array
unsigned int ix1, iy1; // screen coordinate = indices of virtual 2D array
while (1) {
if (!(outcode0 | outcode1)) { // Bitwise OR is 0. Trivially accept and get out of loop
accept = 1;
break;
} else if (outcode0 & outcode1) { // Bitwise AND is not 0. Trivially reject and get out of loop
break;
} else {
// failed both tests, so calculate the line segment to clip
// from an outside point to an intersection with clip edge
double x, y;
// At least one endpoint is outside the clip rectangle; pick it.
int outcodeOut = outcode0 ? outcode0 : outcode1;
// Now find the intersection point;
// use formulas y = y0 + slope * (x - x0), x = x0 + (1 / slope) * (y - y0)
if (outcodeOut & TOP) { // point is above the clip rectangle
x = x0 + (x1 - x0) * (ZyMax - y0) / (y1 - y0);
y = ZyMax;
} else if (outcodeOut & BOTTOM) { // point is below the clip rectangle
x = x0 + (x1 - x0) * (ZyMin - y0) / (y1 - y0);
y = ZyMin;
} else if (outcodeOut & RIGHT) { // point is to the right of clip rectangle
y = y0 + (y1 - y0) * (ZxMax - x0) / (x1 - x0);
x = ZxMax;
} else if (outcodeOut & LEFT) { // point is to the left of clip rectangle
y = y0 + (y1 - y0) * (ZxMin - x0) / (x1 - x0);
x = ZxMin;
}
// Now we move outside point to intersection point to clip
// and get ready for next pass.
if (outcodeOut == outcode0) {
x0 = x;
y0 = y;
outcode0 = ComputeOutCode(x0, y0);
} else {
x1 = x;
y1 = y;
outcode1 = ComputeOutCode(x1, y1);
}
}
}
if (accept)
{ // draw line clipped to view window
// SaveTurns(x0,y0,x1,y1,RayNumber);
// all segment is inside a window
ix0= (x0- ZxMin)/PixelWidth;
iy0 = (ZyMax - y0)/PixelHeight; // inverse Y axis
ix1= (x1- ZxMin)/PixelWidth;
iy1= (ZyMax - y1)/PixelHeight; // inverse Y axis
iDrawLine(A, ix0,iy0,ix1,iy1,RayNumber,color) ;}
}
bool Graph::Clip(Point &p) const
{
uint8_t ca = ComputeOutCode(p);
return ca == INSIDE;
}
void oledc_drawLinePrimative(int x0, int y0, int x1, int y1, unsigned int color)
{
// check rotation, move pixel around if necessary
switch (TFTROTATION) {
case 1:
gfx_swap(x0, y0);
gfx_swap(x1, y1);
x0 = TFTWIDTH - x0 - 1;
x1 = TFTWIDTH - x1 - 1;
//gfx_swap(x0, x1);
break;
case 2:
gfx_swap(x0, x1);
gfx_swap(y0, y1);
x0 = TFTWIDTH - x0 - 1;
y0 = TFTHEIGHT - y0 - 1;
x1 = TFTWIDTH - x1 - 1;
y1 = TFTHEIGHT - y1 - 1;
break;
case 3:
gfx_swap(x0, y0);
gfx_swap(x1, y1);
y0 = TFTHEIGHT - y0 - 1;
y1 = TFTHEIGHT - y1 - 1;
//gfx_swap(y0, y1);
break;
}
// Cohen–Sutherland clipping algorithm clips a line from
// P0 = (x0, y0) to P1 = (x1, y1) against a rectangle with
// diagonal from (xmin, ymin) to (xmax, ymax).
// compute outcodes for P0, P1, and whatever point lies outside the clip rectangle
OutCode outcode0 = ComputeOutCode(x0, y0);
OutCode outcode1 = ComputeOutCode(x1, y1);
char accept = 0;
while (1) {
if (!(outcode0 | outcode1)) { // Bitwise OR is 0. Trivially accept and get out of loop
accept = 1;
break;
} else if (outcode0 & outcode1) { // Bitwise AND is not 0. Trivially reject and get out of loop
break;
} else {
// failed both tests, so calculate the line segment to clip
// from an outside point to an intersection with clip edge
int x, y;
// At least one endpoint is outside the clip rectangle; pick it.
OutCode outcodeOut = outcode0 ? outcode0 : outcode1;
// Now find the intersection point;
// use formulas y = y0 + slope * (x - x0), x = x0 + (1 / slope) * (y - y0)
if (outcodeOut & TOP) { // point is above the clip rectangle
x = x0 + (x1 - x0) * (0 - y0) / (y1 - y0);
y = 0;
} else if (outcodeOut & BOTTOM) { // point is below the clip rectangle
x = x0 + (x1 - x0) * (TFTHEIGHT - y0 - 1) / (y1 - y0);
y = TFTHEIGHT - 1;
} else if (outcodeOut & RIGHT) { // point is to the right of clip rectangle
y = y0 + (y1 - y0) * (TFTWIDTH - x0 - 1) / (x1 - x0);
x = TFTWIDTH - 1;
} else if (outcodeOut & LEFT) { // point is to the left of clip rectangle
y = y0 + (y1 - y0) * (0 - x0) / (x1 - x0);
x = 0;
}
// Now we move outside point to intersection point to clip
// and get ready for next pass.
if (outcodeOut == outcode0) {
x0 = x;
y0 = y;
outcode0 = ComputeOutCode(x0, y0);
} else {
x1 = x;
y1 = y;
outcode1 = ComputeOutCode(x1, y1);
}
}
}
if (accept) {
oledc_writeCommand(SSD1331_CMD_DRAWLINE, 0);
oledc_writeCommand(x0, 0);
oledc_writeCommand(y0, 0);
oledc_writeCommand(x1, 0);
oledc_writeCommand(y1, 0);
oledc_writeCommand((color >> 11) << 1, 0);
oledc_writeCommand((color >> 5) & 0x3F, 0);
oledc_writeCommand((color << 1) & 0x3F, 0);
int _tMark = CNT + (CLKFREQ / 100000);
while (_tMark > CNT); // Wait for system clock target
}
}
// Cohen–Sutherland clipping algorithm clips a line from
// P0 = (x0, y0) to P1 = (x1, y1) against a rectangle with
// diagonal from (xmin, ymin) to (xmax, ymax).
bool clipLine(const pb_rect &bounds, int &x0, int &y0, int &x1, int &y1)
{
// compute outcodes for P0, P1, and whatever point lies outside the clip rectangle
OutCode outcode0 = ComputeOutCode(bounds, x0, y0);
OutCode outcode1 = ComputeOutCode(bounds, x1, y1);
bool accept = false;
double xmin = bounds.x;
double xmax = bounds.x + bounds.width - 1;
double ymin = bounds.y;
double ymax = bounds.y + bounds.height - 1;
while (true) {
if (!(outcode0 | outcode1)) { // Bitwise OR is 0. Trivially accept and get out of loop
accept = true;
break;
}
else if (outcode0 & outcode1) { // Bitwise AND is not 0. Trivially reject and get out of loop
break;
}
else {
// failed both tests, so calculate the line segment to clip
// from an outside point to an intersection with clip edge
double x = 0;
double y=0;
// At least one endpoint is outside the clip rectangle; pick it.
OutCode outcodeOut = outcode0 ? outcode0 : outcode1;
// Now find the intersection point;
// use formulas y = y0 + slope * (x - x0), x = x0 + (1 / slope) * (y - y0)
if (outcodeOut & LN_TOP) { // point is above the clip rectangle
x = x0 + (x1 - x0) * (ymax - y0) / (y1 - y0);
y = ymax;
}
else if (outcodeOut & LN_BOTTOM) { // point is below the clip rectangle
x = x0 + (x1 - x0) * (ymin - y0) / (y1 - y0);
y = ymin;
}
else if (outcodeOut & LN_RIGHT) { // point is to the right of clip rectangle
y = y0 + (y1 - y0) * (xmax - x0) / (x1 - x0);
x = xmax;
}
else if (outcodeOut & LN_LEFT) { // point is to the left of clip rectangle
y = y0 + (y1 - y0) * (xmin - x0) / (x1 - x0);
x = xmin;
}
// Now we move outside point to intersection point to clip
// and get ready for next pass.
if (outcodeOut == outcode0) {
x0 = x;
y0 = y;
outcode0 = ComputeOutCode(bounds, x0, y0);
}
else {
x1 = x;
y1 = y;
outcode1 = ComputeOutCode(bounds, x1, y1);
}
}
}
return accept;
}
void Segmenter:: compute_junctions(const Spot *spot,
const Vertex &self,
const Vertex &other,
const Tracer *to)
{
const Coord klo = spot->klo;
const Coord kup = spot->kup;
const Vertex lo( X[klo.x], Y[klo.y]);
const Vertex up( X[kup.x], Y[kup.y]);
assert( INSIDE == ComputeOutCode(self,lo,up));
const OutCode other_code = ComputeOutCode(other, lo, up);
if( other_code & LEFT)
{
assert( other.x < self.x);
Segment &seg = Vert(klo.x);
Junction *J = seg.append();
#if JUNCTION_TAG == 1
J->kind = Junction::Vert;
J->tag = klo.x;
#endif
J->vertex.x = seg.value;
J->alpha = ( J->vertex.x - self.x)/(other.x - self.x);
J->vertex.y = self.y + (J->alpha)*(other.y - self.y);
FinalizeJunction(J,spot->handle,to);
}
if( other_code & RIGHT)
{
assert( other.x > self.x);
Segment &seg = Vert(kup.x);
Junction *J = seg.append();
#if JUNCTION_TAG == 1
J->kind = Junction::Vert;
J->tag = kup.x;
#endif
J->vertex.x = seg.value;
J->alpha = ( J->vertex.x - self.x)/(other.x - self.x);
J->vertex.y = self.y + (J->alpha)*(other.y - self.y);
FinalizeJunction(J,spot->handle,to);
}
if( other_code & BOTTOM )
{
assert( other.y < self.y );
Segment &seg = Horz(klo.y);
Junction *J = seg.append();
#if JUNCTION_TAG == 1
J->kind = Junction::Horz;
J->tag = klo.y;
#endif
J->vertex.y = seg.value;
J->alpha = (J->vertex.y - self.y)/(other.y-self.y);
J->vertex.x = self.x + (J->alpha)*(other.x-self.x);
FinalizeJunction(J,spot->handle,to);
}
if( other_code & TOP )
{
assert( other.y > self.y );
Segment &seg = Horz(kup.y);
Junction *J = seg.append();
#if JUNCTION_TAG == 1
J->kind = Junction::Horz;
J->tag = kup.y;
#endif
J->vertex.y = seg.value;
J->alpha = (J->vertex.y - self.y)/(other.y-self.y);
J->vertex.x = self.x + (J->alpha)*(other.x-self.x);
FinalizeJunction(J,spot->handle,to);
}
}
// Cohen–Sutherland clipping algorithm clips a line from
// P0 = (x0, y0) to P1 = (x1, y1) against a rectangle with
// diagonal from (xmin, ymin) to (xmax, ymax).
// Based on http://en.wikipedia.org/wiki/Cohen-Sutherland_algorithm
// return false if line segment outside of bounding box
bool GenGeomAlgs::ClipToBB(double& x0, double& y0, double& x1, double& y1,
const double& xmin, const double& ymin,
const double& xmax, const double& ymax)
{
// compute outcodes for P0, P1,
// and whatever point lies outside the clip rectangle
int outcode0 = ComputeOutCode(x0, y0, xmin, ymin, xmax, ymax);
int outcode1 = ComputeOutCode(x1, y1, xmin, ymin, xmax, ymax);
bool accept = false;
while (true) {
if (!(outcode0 | outcode1)) {
// Bitwise OR is 0. Trivially accept and get out of loop
accept = true;
break;
} else if (outcode0 & outcode1) {
// Bitwise AND is not 0. Trivially reject and get out of loop
break;
} else {
// failed both tests, so calculate the line segment to clip
// from an outside point to an intersection with clip edge
double x, y;
// At least one endpoint is outside the clip rectangle; pick it.
int outcodeOut = outcode0 ? outcode0 : outcode1;
// Now find the intersection point;
// use formulas y = y0 + slope * (x - x0),
// x = x0 + (1 / slope) * (y - y0)
if (outcodeOut & TOP) {
// point is above the clip rectangle
x = x0 + (x1 - x0) * (ymax - y0) / (y1 - y0);
y = ymax;
} else if (outcodeOut & BOTTOM) {
// point is below the clip rectangle
x = x0 + (x1 - x0) * (ymin - y0) / (y1 - y0);
y = ymin;
} else if (outcodeOut & RIGHT) {
// point is to the right of clip rectangle
y = y0 + (y1 - y0) * (xmax - x0) / (x1 - x0);
x = xmax;
} else if (outcodeOut & LEFT) {
// point is to the left of clip rectangle
y = y0 + (y1 - y0) * (xmin - x0) / (x1 - x0);
x = xmin;
}
// Now we move outside point to intersection point to clip
// and get ready for next pass.
if (outcodeOut == outcode0) {
x0 = x;
y0 = y;
outcode0 = ComputeOutCode(x0, y0, xmin, ymin, xmax, ymax);
} else {
x1 = x;
y1 = y;
outcode1 = ComputeOutCode(x1, y1, xmin, ymin, xmax, ymax);
}
}
}
return accept;
}
static inline
OutCode ComputeOutCode( const Vertex &r, const Vertex &lo, const Vertex &up) throw()
{
return ComputeOutCode(r.x, r.y, lo.x, up.x, lo.y, up.y);
}
SDL_bool
SDL_IntersectRectAndLine(const SDL_Rect * rect, int *X1, int *Y1, int *X2,
int *Y2)
{
int x = 0;
int y = 0;
int x1, y1;
int x2, y2;
int rectx1;
int recty1;
int rectx2;
int recty2;
int outcode1, outcode2;
if (!rect) {
SDL_InvalidParamError("rect");
return SDL_FALSE;
}
if (!X1) {
SDL_InvalidParamError("X1");
return SDL_FALSE;
}
if (!Y1) {
SDL_InvalidParamError("Y1");
return SDL_FALSE;
}
if (!X2) {
SDL_InvalidParamError("X2");
return SDL_FALSE;
}
if (!Y2) {
SDL_InvalidParamError("Y2");
return SDL_FALSE;
}
/* Special case for empty rect */
if (SDL_RectEmpty(rect)) {
return SDL_FALSE;
}
x1 = *X1;
y1 = *Y1;
x2 = *X2;
y2 = *Y2;
rectx1 = rect->x;
recty1 = rect->y;
rectx2 = rect->x + rect->w - 1;
recty2 = rect->y + rect->h - 1;
/* Check to see if entire line is inside rect */
if (x1 >= rectx1 && x1 <= rectx2 && x2 >= rectx1 && x2 <= rectx2 &&
y1 >= recty1 && y1 <= recty2 && y2 >= recty1 && y2 <= recty2) {
return SDL_TRUE;
}
/* Check to see if entire line is to one side of rect */
if ((x1 < rectx1 && x2 < rectx1) || (x1 > rectx2 && x2 > rectx2) ||
(y1 < recty1 && y2 < recty1) || (y1 > recty2 && y2 > recty2)) {
return SDL_FALSE;
}
if (y1 == y2) {
/* Horizontal line, easy to clip */
if (x1 < rectx1) {
*X1 = rectx1;
} else if (x1 > rectx2) {
*X1 = rectx2;
}
if (x2 < rectx1) {
*X2 = rectx1;
} else if (x2 > rectx2) {
*X2 = rectx2;
}
return SDL_TRUE;
}
if (x1 == x2) {
/* Vertical line, easy to clip */
if (y1 < recty1) {
*Y1 = recty1;
} else if (y1 > recty2) {
*Y1 = recty2;
}
if (y2 < recty1) {
*Y2 = recty1;
} else if (y2 > recty2) {
*Y2 = recty2;
}
return SDL_TRUE;
}
/* More complicated Cohen-Sutherland algorithm */
outcode1 = ComputeOutCode(rect, x1, y1);
outcode2 = ComputeOutCode(rect, x2, y2);
while (outcode1 || outcode2) {
if (outcode1 & outcode2) {
return SDL_FALSE;
}
if (outcode1) {
if (outcode1 & CODE_TOP) {
y = recty1;
x = x1 + ((x2 - x1) * (y - y1)) / (y2 - y1);
} else if (outcode1 & CODE_BOTTOM) {
y = recty2;
x = x1 + ((x2 - x1) * (y - y1)) / (y2 - y1);
} else if (outcode1 & CODE_LEFT) {
x = rectx1;
y = y1 + ((y2 - y1) * (x - x1)) / (x2 - x1);
} else if (outcode1 & CODE_RIGHT) {
x = rectx2;
y = y1 + ((y2 - y1) * (x - x1)) / (x2 - x1);
}
x1 = x;
y1 = y;
outcode1 = ComputeOutCode(rect, x, y);
} else {
if (outcode2 & CODE_TOP) {
y = recty1;
x = x1 + ((x2 - x1) * (y - y1)) / (y2 - y1);
} else if (outcode2 & CODE_BOTTOM) {
y = recty2;
x = x1 + ((x2 - x1) * (y - y1)) / (y2 - y1);
} else if (outcode2 & CODE_LEFT) {
x = rectx1;
y = y1 + ((y2 - y1) * (x - x1)) / (x2 - x1);
} else if (outcode2 & CODE_RIGHT) {
x = rectx2;
y = y1 + ((y2 - y1) * (x - x1)) / (x2 - x1);
}
x2 = x;
y2 = y;
outcode2 = ComputeOutCode(rect, x, y);
}
}
*X1 = x1;
*Y1 = y1;
*X2 = x2;
*Y2 = y2;
return SDL_TRUE;
}
bool CohenSutherlandLineClipAndDraw(float &x0, float &y0, float &z0, float &x1, float &y1, float &z1)
{
// compute outcodes for P0, P1, and whatever point lies outside the clip rectangle
OutCode outcode0 = ComputeOutCode(x0, y0,z0);
OutCode outcode1 = ComputeOutCode(x1, y1,z1);
while (true) {
//std::cout<<x0<<" "<<y0<<" "<<z0<<" "<<std::endl;
if (!(outcode0 | outcode1)) { // Bitwise OR is 0. Trivially accept and get out of loop
// std::cout<<x0<<" "<<y0<<" "<<z0<<" "<<std::endl;
// std::cout<<x1<<" "<<y1<<" "<<z1<<" "<<std::endl<<std::endl;
return true;
} else if (outcode0 & outcode1) { // Bitwise AND is not 0. Trivially reject and get out of loop
return false;
} else {
// failed both tests, so calculate the line segment to clip
// from an outside point to an intersection with clip edge
float x, y, z;
// At least one endpoint is outside the clip rectangle; pick it.
OutCode outcodeOut = outcode0 ? outcode0 : outcode1;
// Now find the intersection point;
if (outcodeOut & TOP) { // point is above the clip rectangle
x = x0 + (x1 - x0) * (YMAX - y0) / (y1 - y0);
y = YMAX;
z = z0 + (z1 - z0) * (YMAX - y0) / (y1 - y0);
} else if (outcodeOut & BOTTOM) { // point is below the clip rectangle
x = x0 + (x1 - x0) * (YMIN - y0) / (y1 - y0);
y = YMIN;
z = z0 + (z1 - z0) * (YMIN - y0) / (y1 - y0);
} else if (outcodeOut & RIGHT) { // point is to the right of clip rectangle
y = y0 + (y1 - y0) * (XMAX - x0) / (x1 - x0);
x = XMAX;
z = z0 + (z1 - z0) * (XMAX - x0) / (x1 - x0);
} else if (outcodeOut & LEFT) { // point is to the left of clip rectangle
y = y0 + (y1 - y0) * (XMIN - x0) / (x1 - x0);
x = XMIN;
z = z0 + (z1 - z0) * (XMIN - x0) / (x1 - x0);
} else if (outcodeOut & BEHIND) { // point is to the left of clip rectangle
y = y0 + (y1 - y0) * (ZMIN - z0) / (z1 - z0);
x = x0 + (x1 - x0) * (ZMIN - z0) / (z1 - z0);
z = ZMIN;
} else if (outcodeOut & FRONT) { // point is to the left of clip rectangle
y = y0 + (y1 - y0) * (ZMAX - z0) / (z1 - z0);
x = x0 + (x1 - x0) * (ZMAX - z0) / (z1 - z0);
z = ZMAX;
}
// Now we move outside point to intersection point to clip
// and get ready for next pass.
if (outcodeOut == outcode0) {
x0 = x;
y0 = y;
z0 = z;
outcode0 = ComputeOutCode(x0, y0, z0);
} else {
x1 = x;
y1 = y;
z1 = z;
outcode1 = ComputeOutCode(x1, y1,z1);
}
}
}
}
void CohenSutherland(double x0, double y0, double x1, double y1)
{
outcode outcode0, outcode1, outcodeOut;
bool accept=false, done=false;
outcode0=ComputeOutCode(x0,y0);
outcode1=ComputeOutCode(x1,y1);
do
{
if(!(outcode0|outcode1))
{
accept=true;
done=true;
}
else if(outcode0&outcode1)
done=true;
else
{
double x, y;
outcodeOut=outcode0?outcode0:outcode1;
if(outcodeOut&TOP)
{
x=x0+(x1-x0)*(ymax-y0)/(y1-y0);
y=ymax;
}
else if(outcodeOut&BOTTOM)
{
x=x0+(x1-x0)*(ymin-y0)/(y1-y0);
y=ymin;
}
else if(outcodeOut&RIGHT)
{
y=y0+(y1-y0)*(xmax-x0)/(x1-x0);
x=xmax;
}
else
{
y=y0+(y1-y0)*(xmin-x0)/(x1-x0);
x=xmin;
}
if(outcodeOut==outcode0)
{
x0=x;
y0=y;
outcode0=ComputeOutCode(x0,y0);
}
else
{
x1=x;
y1=y;
outcode1=ComputeOutCode(x1,y1);
}
}
}while(!done);
if(accept)
{
double sx=(xvmax-xvmin)/(xmax-xmin);
double sy=(yvmax-yvmin)/(ymax-ymin);
double vx0=xvmin+(x0-xmin)*sx;
double vy0=yvmin+(y0-ymin)*sy;
double vx1=xvmin+(x1-xmin)*sx;
double vy1=yvmin+(y1-ymin)*sy;
glColor3f(1.0,0.0,0.0);
glBegin(GL_LINE_LOOP);
glVertex2f(xvmin, yvmin);
glVertex2f(xvmax, yvmin);
glVertex2f(xvmax, yvmax);
glVertex2f(xvmin, yvmax);
glEnd();
glColor3f(0.0,0.0,1.0);
glBegin(GL_LINES);
glVertex2d(vx0,vy0);
glVertex2d(vx1,vy1);
glEnd();
}
}
/** Cohen-Sutherland clipping algorithm clips a line from
P0 = (x0, y0) to P1 = (x1, y1) against a rectangle with
diagonal from (xmin, ymin) to (xmax, ymax). **/
void
cohen_sutherland_clip (int * x0, int * y0,int * x1, int * y1, int xmin, int ymin,
int xmax, int ymax)
{
//Outcodes for P0, P1, and whatever point lies outside the clip rectangle
outcode outcode0, outcode1, outcodeOut;
bool accept = false, done = false;
int tx0 = *x0, ty0 = *y0, tx1 = *x1, ty1 = *y1;
//compute outcodes
outcode0 = ComputeOutCode (tx0, ty0, xmin, ymin, xmax, ymax);
outcode1 = ComputeOutCode (tx1, ty1, xmin, ymin, xmax, ymax);
do{
if (!(outcode0 | outcode1)) //logical or is 0. Trivially accept and get out of loop
{
accept = true;
done = true;
}
else if (outcode0 & outcode1) //logical and is not 0. Trivially reject and get out of loop
done = true;
else
{
//failed both tests, so calculate the line segment to clip
//from an outside point to an intersection with clip edge
double x, y;
//At least one endpoint is outside the clip rectangle; pick it.
outcodeOut = outcode0? outcode0: outcode1;
//Now find the intersection point;
//use formulas y = y0 + slope * (x - x0), x = x0 + (1/slope)* (y - y0)
if (outcodeOut & TOP) //point is above the clip rectangle
{
x = tx0 + (tx1 - tx0) * (ymax - ty0)/(ty1 - ty0);
y = ymax;
}
else if (outcodeOut & BOTTOM) //point is below the clip rectangle
{
x = tx0 + (tx1 - tx0) * (ymin - ty0)/(ty1 - ty0);
y = ymin;
}
else if (outcodeOut & RIGHT) //point is to the right of clip rectangle
{
y = ty0 + (ty1 - ty0) * (xmax - tx0)/(tx1 - tx0);
x = xmax;
}
else //point is to the left of clip rectangle
{
y = ty0 + (ty1 - ty0) * (xmin - tx0)/(tx1 - tx0);
x = xmin;
}
//Now we move outside point to intersection point to clip
//and get ready for next pass.
if (outcodeOut == outcode0)
{
tx0 = x;
ty0 = y;
outcode0 = ComputeOutCode (tx0, ty0, xmin, ymin, xmax, ymax);
}
else
{
tx1 = x;
ty1 = y;
outcode1 = ComputeOutCode (tx1, ty1, xmin, ymin, xmax, ymax);
}
}
}while (!done);
if (accept)
{
*x0 = tx0; *x1 = tx1;
*y0 = ty0; *y1 = ty1;
}
}
