// 指定された矩形領域を塗りつぶす
void CMglImage::Paint( RECT* rect, D3DCOLOR color )
{
CreateCheck(); // Createチェック
if ( m_bRenderTarget == TRUE )
{
// 現在のレンダーを保持（勝手に書き換えちゃマズいからなｗ）
IDirect3DSurface8* bkupRender;
d3d->GetRenderTarget( &bkupRender );
SetRender();
//d3d->Clear( 0, NULL, D3DCLEAR_TARGET, color, 1.0f, 0 ); // |D3DCLEAR_ZBUFFER
m_myudg->Paint( rect, color ); // |D3DCLEAR_ZBUFFER
// レンダーを元に戻す
MyuAssert( d3d->SetRenderTarget( bkupRender, NULL ), D3D_OK, //m_myudg->lpZbuffer
"CMglImage::Clear() レンダーを戻すのに失敗" );
}
else
{
// 別にクリアされたサーフェスを作成してそこからコピー、と言う面倒な処理(´Д`)
CMglImage workSurface;
workSurface.Init( m_myudg );
workSurface.Create(); // レンダリング先はTRUEにしないと無限再帰してしまう
workSurface.Paint( rect, color );
CopyRectToThis( &workSurface );
}
}
void CMglTexture::Clear__( D3DCOLOR color )
{
CreateCheck(); // Createチェック
LockedCheck();
if ( m_bRenderTarget == TRUE )
{
// 現在のレンダーを保持（勝手に書き換えちゃマズいからなｗ）
_MGL_IDirect3DSurface* bkupRender;
#if _MGL_DXVER == 9
d3d->GetRenderTarget( 0, &bkupRender );
#else
d3d->GetRenderTarget( &bkupRender );
#endif
SetRender();
//d3d->Clear( 0, NULL, D3DCLEAR_TARGET, color, 1.0f, 0 ); // |D3DCLEAR_ZBUFFER
m_myudg->Clear( color ); // |D3DCLEAR_ZBUFFER
// D3DCOLOR_FULLALPHA
// レンダーを元に戻す
#if _MGL_DXVER == 9
MyuAssert( d3d->SetRenderTarget( 0, bkupRender ), D3D_OK,
#else
MyuAssert( d3d->SetRenderTarget( bkupRender, NULL ), D3D_OK, //m_myudg->lpZbuffer
#endif
"CMglTexture::Clear() レンダーを戻すのに失敗" );
}
// 絵画（CopyRectを使用）
void CMglImage::CopyRectToOther( CMglImage* destSurface, RECT *srcRect, int x, int y )
{
CreateCheck(); // Createチェック
//if ( m_pSurface == NULL )
// MyuThrow( 0, "CMglImage::CopyRectToOther() m_pSurfaceが取得されていません。");
// srcRectにNULLを指定された場合はフルで絵画
D3DXLoadSurfaceFromSurface(
destSurface->GetSurfacePtr(), NULL, NULL,
m_pSurface, NULL, NULL,
D3DX_FILTER_POINT, 0 );
/*
RECT _srcRect;
if ( srcRect == NULL )
{
srcRect = &_srcRect;
_Rect( m_nBmpSizeX, m_nBmpSizeY, srcRect );
}
POINT destPoint;
destPoint.x = x;
destPoint.y = y;
// そのうちクリッピングさぽーとさせるぅ
if ( m_pSurface == destSurface->GetSurfacePtr() )
MyuThrow(0,"CMglImage::CopyRectToOther() destSurfaceに自分自身のサーフェスを指定することは出来ません。");
//if (FAILED(d3d->CopyRects(m_pSurface, srcRect, 1, destSurface, &destPoint))) {
//MyuAssert( d3d->CopyRects(m_pSurface, NULL, 1, destSurface, NULL), D3D_OK,
MyuAssert( d3d->CopyRects(m_pSurface, srcRect, 1, destSurface->GetSurfacePtr(), &destPoint), D3D_OK,
"CMglImage::CopyRectToOther() CopyRect()に失敗" );
*/
}
// 絵画先をこのサーフェスに設定する
void CMglImage::SetRender()
{
CreateCheck(); // Createチェック
MyuAssert( d3d->SetRenderTarget( m_pSurface, NULL ), D3D_OK, //m_myudg->lpZbuffer
"CMglImage::SetRender() SetRenderTarget()に失敗" );
}
void CMgl3dSquare::SetTexture(int no, CMglD3dTexture &tex)
{
InitCheck();
CreateCheck();
m_texList[no] = &tex;
//MGLTUTV tutv = m_tex->GetTuTv();
SetTuTv(no, tex.GetTuTv());
}
// DrawPrimitiveUP
void CMglTexture::DrawPrimitiveUP( D3DPRIMITIVETYPE primitiveType, UINT nPrimitiveCount,
const void *pVertexStreamZeroData, UINT nVertexStreamZeroStride )
{
CreateCheck(); // Createチェック
LockedCheck();
// 絵画
MyuAssert( d3d->DrawPrimitiveUP( primitiveType, nPrimitiveCount, pVertexStreamZeroData, nVertexStreamZeroStride ), D3D_OK,
"CMglImage::TextureDrawPrimitive() DrawPrimitiveUP()に失敗" );
}
void CMglImage::TextureDrawPrimitive()
{
CreateCheck(); // Createチェック
// テクスチャの設定
MyuAssert( d3d->SetTexture(0, m_pTexture), D3D_OK,
"CMglImage::TextureDrawPrimitive() SetTexture()に失敗" );
// 絵画
MyuAssert( d3d->DrawPrimitiveUP( D3DPT_TRIANGLEFAN, 2, m_vertices, sizeof(MYU_VERTEX) ), D3D_OK,
"CMglImage::TextureDrawPrimitive() DrawPrimitiveUP()に失敗" );
}
// 絵画先をこのサーフェスに設定する
void CMglTexture::SetRender()
{
CreateCheck(); // Createチェック
LockedCheck();
#if _MGL_DXVER == 9
MyuAssert( d3d->SetRenderTarget( 0, m_pSurface ), D3D_OK,
#else
MyuAssert( d3d->SetRenderTarget( m_pSurface, NULL ), D3D_OK, //m_myudg->lpZbuffer
#endif
"CMglTexture::SetRender() SetRenderTarget()に失敗" );
}
bool CUpdateUtil::GetSpecialDirectory(int nFolder, CString &strPath)
{
CString strFullPath;
LPTSTR lpszSystemInfo; // pointer to system information string
TCHAR tchBuffer[MAX_PATH] = { 0, }; // buffer for expanded string
lpszSystemInfo = tchBuffer;
int nSize;
switch (nFolder)
{
case UPDATE_SYSTEM:
nSize = ::GetSystemDirectory(lpszSystemInfo, MAX_PATH+1);
break;
case UPDATE_WINDOWS:
nSize = ::GetWindowsDirectory(lpszSystemInfo, MAX_PATH+1);
break;
case UPDATE_PROGRAM_FILES:
nSize = ::GetWindowsDirectory(lpszSystemInfo, MAX_PATH+1);
break;
case UPDATE_TEMP:
TCHAR szTempFilePath[MAX_PATH] = { 0, };
//TCHAR szTempFileLongPath[MAX_PATH+1];
DWORD dwPathLength;
dwPathLength = ::GetTempPath(MAX_PATH, szTempFilePath);
// ::GetFullPathName(szTempFilePath, sizeof(szTempFileLongPath)/sizeof(szTempFileLongPath[0]), szTempFileLongPath, NULL);
// ::GetLongPathName((LPCTSTR)szTempFilePath, (LPTSTR)szTempFileLongPath, sizeof(szTempFileLongPath)/sizeof(szTempFileLongPath[0]));
GetLongPathNameEx(szTempFilePath, strFullPath);
strcpy(szTempFilePath, strFullPath);
lpszSystemInfo = szTempFilePath;
break;
}
if(nSize == 0)
{
return false;
}
strPath = (LPCTSTR)lpszSystemInfo;
if(nFolder == UPDATE_PROGRAM_FILES)
{
CString strTmp = strPath.Left( strPath.Find( '\\' ) ); // C:\ //
strTmp += "\\Program Files";
if(!CreateCheck(strTmp))
{
return false;
}
strPath = strTmp;
}
return true;
}
// 描画
void CMgl3dSquare::Draw()
{
InitCheck();
CreateCheck();
/*if ( m_tex != NULL )
m_tex->SetD3dStageTexture();*/
for(int i=0; i<MGL_TEXTURE_STAGE_MAX; i++ ){
if ( m_texList[i] != NULL ){
m_texList[i]->SetD3dStageTexture(i);
m_tss.Sets(i);
}
}
CMglVertexManagerX::Draw(D3DPT_TRIANGLESTRIP);
}
BOOL CUpdateUtil::CheckFolder(CString strPath)
{
CString strFindPath = strPath;
CString strTmp;
BOOL bSuccess = TRUE;
int nFind = 3;
int nEnd = strPath.ReverseFind('\\');
while(nFind <= nEnd && bSuccess)
{
nFind = strPath.Find('\\', nFind);
strTmp = strFindPath.Left( nFind );
bSuccess = CreateCheck(strTmp);
nFind++;
}
if(!bSuccess)
return FALSE;
return TRUE;
}
// 描画（頂点数不定）
void CMglTexture::Draw( MYU_VERTEX *pMyuVertex, UINT nPrimitiveCount, BOOL bVertexRevise )
{
CreateCheck(); // Createチェック
LockedCheck();
// 頂点補正
if ( bVertexRevise )
//MglMoveVertexs1( (MYU_VERTEX1*)pMyuVertex, TEXTURE_FLOAT_ADJ, TEXTURE_FLOAT_ADJ, 2+nPrimitiveCount );
MglMoveVertexs( pMyuVertex, TEXTURE_FLOAT_ADJ, TEXTURE_FLOAT_ADJ, TEXTURE_FLOAT_ADJ, 2+nPrimitiveCount );
/*
// テクスチャの設定
MyuAssert( d3d->SetTexture(0, m_pTexture), D3D_OK,
"CMglImage::TextureDrawPrimitive() SetTexture()に失敗" );
*/
SetD3dStageTexture();
DrawPrimitiveUP( D3DPT_TRIANGLEFAN, nPrimitiveCount, pMyuVertex, sizeof(MYU_VERTEX) );
// 絵画
/*MyuAssert( d3d->DrawPrimitiveUP( D3DPT_TRIANGLEFAN, nPrimitiveCount, pMyuVertex, sizeof(MYU_VERTEX) ), D3D_OK,
"CMglImage::TextureDrawPrimitive() DrawPrimitiveUP()に失敗" );*/
}
BOOL CHttpFileDownload::CheckFolder(CString strPath)
{
CString strFindPath = strPath;
CString strTmp;
BOOL bSuccess = TRUE;
int nFind = 3;
int nEnd = strPath.ReverseFind('\\');
HTTP_CANCEL();
while(nFind <= nEnd && bSuccess)
{
HTTP_CANCEL();
nFind = strPath.Find('\\', nFind);
strTmp = strFindPath.Left( nFind );
bSuccess = CreateCheck(strTmp);
nFind++;
}
if(!bSuccess)
return FALSE;
return TRUE;
/*
if(_chdir((LPCSTR)(LPCTSTR)strPath) == 0)
return TRUE;
else{
if(_mkdir((LPCSTR)(LPCTSTR)strPath) == 0)
return TRUE;
else{
// ErrMsgBox("Failed to Create Download Directory!");
return FALSE;
}
}
*/
}
char Proc_Display(char *NC)
{
CHECK_BOX Disp_Check[3] ;
char key,Event,temp[1],active_digit,rx_char ;
char index,down_id=0xFF,i,flicker = 0 ;
union
{
unsigned int pos[2] ;
char byte[4] ;
}TPoint ;
Color = Black ;
Color_BK = 0xEF9F ;
Clear_LCD(Color_BK) ;
DrawRectFill(0,0,240,25,Blue) ;
DrawRectFill(0,295,240,25,Blue) ;
ShowIcon24(217,0,24,23,ICON_CLOSE) ;
Color = 0xFFFF ;
Color_BK = Blue ;
PutStringCN16(4,4,"数码管控制") ;
PutStringCN16(200,300,"退出") ;
Color = Black ;
Color_BK = WINDOW_BK_COLOR ;
DrawFrame(3,80,232,48) ;
DrawRectFill(4,81,232,46,Black) ;
DrawPanel(6,160,228,72,"") ;
CreateButton(1,"＜",15, 175,45,20) ;
CreateButton(2,"＞",70, 175,45,20) ;
CreateButton(3,"＋",125,175,45,20) ;
CreateButton(4,"－",180,175,45,20) ;
for(active_digit=1;active_digit<9;active_digit++)
{
temp[0] = Find_Data(LED[active_digit-1].data) ;
if(!(LED[active_digit-1].mode&DIGIT_OFF))
Draw7Seg2436(temp[0],(active_digit-1)*29+5,
87,Red,Black ) ;
if(!(LED[active_digit-1].data&SEGDP))
DrawRectFill((active_digit-1)*29+30,120,
3,3,Red) ;
}
for(active_digit=1;active_digit<9;active_digit++)
{
DrawFrame((active_digit-1)*29+14,139,11,11) ;
DrawRectFill((active_digit-1)*29+15,140,10,10,Dark_Grey);
}
DrawRectFill(15,140,10,10,Green) ;
active_digit = 1 ;
CreateCheck(&Disp_Check[0],25 ,210,12,12,"闪烁") ;
CreateCheck(&Disp_Check[1],90 ,210,12,12,"消隐") ;
CreateCheck(&Disp_Check[2],150,210,12,12,"小数点") ;
if(LED[active_digit-1].mode&DIGIT_FLICKER)
CheckCheck(&Disp_Check[0]) ;
if(LED[active_digit-1].mode&DIGIT_OFF)
CheckCheck(&Disp_Check[1]) ;
if(!(LED[active_digit-1].data&SEGDP))
CheckCheck(&Disp_Check[2]) ;
temp[0] = 0x00 ;
for(;;)
{
OS_WaitMail(&MBKeyTP) ;
OS_GetMail1(&MBKeyTP, &Event) ;
OS_GetMail1(&MBKeyTP, &key) ;
OS_GetMail1(&MBKeyTP, &rx_char) ;
OS_GetMail1(&MBKeyTP, &TPoint.byte[0]) ;
OS_GetMail1(&MBKeyTP, &TPoint.byte[1]) ;
OS_GetMail1(&MBKeyTP, &TPoint.byte[2]) ;
OS_GetMail1(&MBKeyTP, &TPoint.byte[3]) ;
if(Event&EVENT_TP_TOUCHED)
{
index = InScopeButton(TPoint.pos[0],
TPoint.pos[1] ) ;
if(index==0xFF)
{
OS_Use(&SemaLCD) ;
SetButtonUp(down_id) ;
down_id = index ;
OS_Unuse(&SemaLCD) ;
}
else if(index!=down_id)
{
OS_Use(&SemaLCD) ;
SetButtonUp(down_id) ;
down_id = index ;
SetButtonDown(down_id) ;
OS_Unuse(&SemaLCD) ;
}
}
else if(Event&EVENT_TP_PRESSED)
{
index = InScopeButton(TPoint.pos[0],
TPoint.pos[1] ) ;
OS_Use(&SemaLCD) ;
SetButtonUp(index) ;
down_id = 0xFF ;
OS_Unuse(&SemaLCD) ;
switch(index)
{
case 1:
if(active_digit>1)
{
active_digit-- ;
DrawRectFill((active_digit)*29+15,140,10,10,Dark_Grey);
DrawRectFill((active_digit-1)*29+15,140,10,10,Green);
if(LED[active_digit-1].mode&DIGIT_FLICKER)
CheckCheck(&Disp_Check[0]) ;
else
unCheckCheck(&Disp_Check[0]) ;
if(LED[active_digit-1].mode&DIGIT_OFF)
CheckCheck(&Disp_Check[1]) ;
else
unCheckCheck(&Disp_Check[1]) ;
if(!(LED[active_digit-1].data&SEGDP))
CheckCheck(&Disp_Check[2]) ;
else
unCheckCheck(&Disp_Check[2]) ;
}
break ;
case 2:
if(active_digit<8)
{
active_digit++ ;
DrawRectFill((active_digit-2)*29+15,140,10,10,Dark_Grey);
DrawRectFill((active_digit-1)*29+15,140,10,10,Green);
if(LED[active_digit-1].mode&DIGIT_FLICKER)
CheckCheck(&Disp_Check[0]) ;
else
unCheckCheck(&Disp_Check[0]) ;
if(LED[active_digit-1].mode&DIGIT_OFF)
CheckCheck(&Disp_Check[1]) ;
else
unCheckCheck(&Disp_Check[1]) ;
if(!(LED[active_digit-1].data&SEGDP))
CheckCheck(&Disp_Check[2]) ;
else
unCheckCheck(&Disp_Check[2]) ;
}
break ;
case 3:
temp[0] = Find_Data(LED[active_digit-1].data);
if(++temp[0]>9) temp[0] = 0 ;
LED[active_digit-1].data |= 0x7F ;
LED[active_digit-1].data &= SMG[temp[0]] ;
Draw7Seg2436(temp[0],(active_digit-1)*29+5,
87,Red,Black ) ;
break ;
case 4:
temp[0] = Find_Data(LED[active_digit-1].data);
if(--temp[0]>250) temp[0] = 9 ;
LED[active_digit-1].data |= 0x7F ;
LED[active_digit-1].data &= SMG[temp[0]] ;
Draw7Seg2436(temp[0],(active_digit-1)*29+5,
87,Red,Black ) ;
break ;
}
for(i=0;i<3;i++)
{
if(!InCheckScope(TPoint.pos[0],
TPoint.pos[1],
&Disp_Check[i]))
{
if(Disp_Check[i].status&CHECK_CHECKED)
{
unCheckCheck(&Disp_Check[i]) ;
switch(i)
{
case 0:
LED_Flicker_Digit(active_digit,0) ;
temp[0] = Find_Data(LED[active_digit-1].data) ;
if(!(LED[active_digit-1].mode&DIGIT_OFF))
{
Draw7Seg2436(temp[0],(active_digit-1)*29+5,
87,Red,Black ) ;
if(!(LED[active_digit-1].data&SEGDP))
DrawRectFill((active_digit-1)*29+30,120,3,3,Red) ;
}
break ;
case 1:
temp[0] = Find_Data(LED[active_digit-1].data) ;
Draw7Seg2436(temp[0],(active_digit-1)*29+5,
87,Red,Black ) ;
if(!(LED[active_digit-1].data&SEGDP))
DrawRectFill((active_digit-1)*29+30,120,3,3,Red) ;
LED[active_digit-1].mode &=~DIGIT_OFF ;
break ;
case 2:
LED[active_digit-1].data |= SEGDP ;
DrawRectFill((active_digit-1)*29+30,120,
3,3,Black) ;
break ;
}
}
else
{
CheckCheck(&Disp_Check[i]) ;
switch(i)
{
case 0:
LED_Flicker_Digit(active_digit,1) ;
break ;
case 1:
temp[0] = Find_Data(LED[active_digit-1].data) ;
Draw7Seg2436(temp[0],(active_digit-1)*29+5,
87,Black,Black ) ;
DrawRectFill((active_digit-1)*29+30,120,
3,3,Black) ;
LED[active_digit-1].mode |= DIGIT_OFF ;
break ;
case 2:
LED[active_digit-1].data &=~SEGDP ;
DrawRectFill((active_digit-1)*29+30,120,
3,3,Red) ;
break ;
}
}
break ;
}
}
if( (TPoint.pos[0]<230&&TPoint.pos[0]>200&&TPoint.pos[1]>295)
||(TPoint.pos[0]>220&&TPoint.pos[1]<20 ))
break ;
}
else if(Event&EVENT_FLICKER)
{
if(flicker++>0)
{
for(i=1;i<9;i++)
{
temp[0] = Find_Data(LED[i-1].data) ;
if( !(LED[i-1].mode&DIGIT_OFF)
&& (LED[i-1].mode&DIGIT_FLICKER))
{
Draw7Seg2436(temp[0],(i-1)*29+5,
87,Red,Black ) ;
if(!(LED[i-1].data&SEGDP))
DrawRectFill((i-1)*29+30,120,3,3,Red) ;
}
}
flicker = 0x00 ;
}
else
{
for(i=1;i<9;i++)
{
temp[0] = Find_Data(LED[i-1].data) ;
if( !(LED[i-1].mode&DIGIT_OFF)
&& (LED[i-1].mode&DIGIT_FLICKER))
{
Draw7Seg2436(temp[0],(i-1)*29+5,
87,Black,Black ) ;
if(!(LED[i-1].data&SEGDP))
DrawRectFill((i-1)*29+30,120,3,3,Black) ;
}
}
}
}
}
DeleteButton(1) ;
DeleteButton(2) ;
DeleteButton(3) ;
DeleteButton(4) ;
return 0x00 ;
}
FontWindow::FontWindow(int a,int b,int c,char *name,char *style,BRect rct):BWindow(rct,GetMessage(msg_font),B_TITLED_WINDOW_LOOK,B_MODAL_APP_WINDOW_FEEL,B_NOT_RESIZABLE|B_NOT_ZOOMABLE|B_ASYNCHRONOUS_CONTROLS)
{
BRect rect(Bounds());
BView *xt;
BMenu *menu;
int nb;
bool size = false;
char tmp[512];
sprintf(&tmp[0],"%s, %s",name,style);
this->AddShortcut('W',0,new BMessage(B_QUIT_REQUESTED));
xt = CreateView(rect);
menu = CreateMenu(this,&choice_font[0],5000,0);
b0 = new BMenuField(MyRect(10,10,260,25),"","Font",menu);
SetChoiceInMenu(b0->Menu(),a,true);
SetDivider(b0,16);
menu = CreateMenu(this);
nb = AddFontMenu(&tmp[0],menu,6000,this);
b1 = new BMenuField(MyRect(10,35,260,25),"","Style",menu);
SetChoiceInMenu(b1->Menu(),nb,true);
SetDivider(b1,16);
menu = CreateMenu(this);
for(int32 i = 0; i < 9; i++)
{
if (!size && b == kFontSizeSet[i])
{
b = i; size = true;
}
sprintf(&buf[0],"%d",kFontSizeSet[i]);
AddItemInMenu(menu,&buf[0],7000);
}
b2 = new BMenuField(MyRect(10,60,260,25),"","Size",menu);
if (size)
{
SetChoiceInMenu(b2->Menu(),b,true);
}
SetDivider(b2,16);
b3 = CreateCheck(MyRect(10,85,100,25),"Antiliasing",8000,false);
b3->SetValue(c);
xt->AddChild(b0);
xt->AddChild(b1);
xt->AddChild(b2);
xt->AddChild(b3);
AddChild(xt);
}
void cMenu::InitMenu()
{
//Create Tabs.
CreateTab("Aim");
CreateTab("Gun");
CreateTab("ESP");
CreateTab("Misc");
CreateTab("Chat");
//Create Check Boxes.
CreateCheck("Aim", "Aimbot", &M_AimEnable);
CreateCheck("Aim", "Silent Aim", &M_Aim_Silent);
CreateCheck("Aim", "Teamkill", &M_Aim_TeamKill);
CreateCheck("Aim", "Kill Players", &M_Aim_KillPlayer);
CreateCheck("Aim", "Kill NPCs", &M_Aim_KillNPC);
CreateCheck("Aim", "Triggerbot", &M_TriggerBot);
CreateCheck("Gun", "Auto Pistol", &M_AutoPistol);
CreateCheck("Gun", "Auto Reload", &M_AutoReload);
CreateCheck("Gun", "No Spread", &M_NoSpread);
CreateCheck("ESP", "Enable", &M_ESP);
CreateCheck("ESP", "Name", &M_ESP_Name);
CreateCheck("ESP", "Health", &M_ESP_Health);
CreateCheck("ESP", "Health Bar", &M_ESP_HealthBar);
CreateCheck("ESP", "3D Boxes", &M_ESP_3D);
CreateCheck("ESP", "NPCs", &M_ESP_NPCs);
CreateCheck("ESP", "Players", &M_ESP_Players);
CreateCheck("ESP", "Weapons", &M_ESP_Weapons);
CreateCheck("ESP", "View ESP", &M_ESP_ViewESP);
CreateCheck("Misc", "Name Changer", &M_NameChanger);
CreateCheck("Misc", "Bunny Hop", &M_Bhop);
CreateCheck("Misc", "Freeze Hack", &M_FreezeHack);
CreateCheck("Misc", "Fake Lag", &M_FakeLag);
CreateCheck("Misc", "Fast Join", &M_FastJoin);
CreateCheck("Misc", "Disconnect Spam", &M_DisconnectSpam);
CreateCheck("Misc", "Speedhake", &M_Speed);
CreateCheck("Chat", "Voice Imitator", &M_VoiceChatImitator );
CreateCheck("Chat", "Text Imitator", &M_TextChatImitator );
CreateCheck("Chat", "Team-Text", &M_TextChatTeam );
CreateCheck("Chat", "Chat Spam", &M_ChatSpam );
CreateCheck("Chat", "Voice Spam", &M_VoiceChatSpam );
//Create Sliders
CreateSlider("Misc", "Speed", 100, &S_Speed);
CreateSlider("Misc", "Crosshair", 5, &S_CrossHair);
//Create Text Boxes
CreateTextBox("ESP", "Custom ESP", &T_CustomESP);
CreateTextBox("Chat", "Chat Spam", &T_ChatSpam);
//M_ClientSpectate
}
// Texture(DrawPrimitiveUP)で絵画
void CMglImage::TextureDraw(
float x, float y, RECT* srcRect, float fScaleX, float fScaleY,
float fRotationCenterX, float fRotationCenterY, float fAngle,
VERTEX_COLORS* vertexColors, DWORD dwAlphaOption )
{
CreateCheck(); // Createチェック
// srcRectを考慮したBMPサイズ
int nBmpSrcX = m_nBmpSizeX;
int nBmpSrcY = m_nBmpSizeY;
// 転送元もどきの設定
if ( srcRect == NULL )
{
m_vertices[VERTEXNO_LT].tu = m_vertices[VERTEXNO_LB].tu = 0.0f;
m_vertices[VERTEXNO_LT].tv = m_vertices[VERTEXNO_RT].tv = 0.0f;
//m_vertices[VERTEXNO_RB].tu = m_vertices[VERTEXNO_RT].tu = 1.0f;
//m_vertices[VERTEXNO_RB].tv = m_vertices[VERTEXNO_LB].tv = 1.0f;
m_vertices[VERTEXNO_RT].tu = m_vertices[VERTEXNO_RB].tu = fRealTexTu;
m_vertices[VERTEXNO_LB].tv = m_vertices[VERTEXNO_RB].tv = fRealTexTv;
}
else
{
float fLeftTu = ((float)srcRect->left / m_nBmpSizeX) * fRealTexTu;
float fRightTu = ((float)srcRect->right / m_nBmpSizeX) * fRealTexTu;
float fTopTv = ((float)srcRect->top / m_nBmpSizeY) * fRealTexTv;
float fBottomTv = ((float)srcRect->bottom / m_nBmpSizeY) * fRealTexTv;
/*
m_vertices[VERTEXNO_LT].tu = m_vertices[VERTEXNO_LB].tu = fLeftTu;
m_vertices[VERTEXNO_RT].tu = m_vertices[VERTEXNO_RB].tu = fRightTu;
m_vertices[VERTEXNO_LT].tv = m_vertices[VERTEXNO_RT].tv = fTopTv;
m_vertices[VERTEXNO_LB].tv = m_vertices[VERTEXNO_RB].tv = fBottomTv;
*/
m_vertices[VERTEXNO_LT].tu = m_vertices[VERTEXNO_LB].tu = fLeftTu;
m_vertices[VERTEXNO_RT].tu = m_vertices[VERTEXNO_RB].tu = fRightTu;
m_vertices[VERTEXNO_LT].tv = m_vertices[VERTEXNO_RT].tv = fTopTv;
m_vertices[VERTEXNO_LB].tv = m_vertices[VERTEXNO_RB].tv = fBottomTv;
nBmpSrcX = srcRect->right - srcRect->left;
nBmpSrcY = srcRect->bottom - srcRect->top;
}
// 中心基点絵画機能
if ( m_bCenterDraw == TRUE )
{
int nSizeX = srcRect->right - srcRect->left;
int nSizeY = srcRect->bottom - srcRect->top;
x -= (nSizeX/2) * fScaleX;
y -= (nSizeY/2) * fScaleY;
}
// 絵画先位置、及び伸縮率の設定
m_vertices[VERTEXNO_LT].x = m_vertices[VERTEXNO_LB].x = x + X_ADJ; // 絵画先位置X
m_vertices[VERTEXNO_LT].y = m_vertices[VERTEXNO_RT].y = y + Y_ADJ; // 絵画先位置Y
m_vertices[VERTEXNO_RB].x = m_vertices[VERTEXNO_RT].x = x + X_ADJ + nBmpSrcX * fScaleX; // 伸縮率X
m_vertices[VERTEXNO_RB].y = m_vertices[VERTEXNO_LB].y = y + Y_ADJ + nBmpSrcY * fScaleY; // 伸縮率Y
// 色
m_vertices[VERTEXNO_LT].color = vertexColors->leftTop;
m_vertices[VERTEXNO_RT].color = vertexColors->rightTop;
m_vertices[VERTEXNO_LB].color = vertexColors->leftBottom;
m_vertices[VERTEXNO_RB].color = vertexColors->rightBottom;
// アルファオプション
m_myudg->SetAlphaMode( dwAlphaOption );
// 絵画
TextureDrawPrimitive();
}
// 回転・スケーリング・アルファオプション付き絵画（スプライトを使用）
void CMglImage::DrawEx(
float fScaleX, float fScaleY, float fRotationCenterX, float fRotationCenterY, float fAngle,
float x, float y, RECT *srcRect, D3DCOLOR color )
// float x, float y, RECT *srcRect, D3DCOLOR color, DWORD dwAlphaOption )
{
CreateCheck(); // Createチェック
// srcRectにNULLを指定された場合はフルで絵画
RECT _srcRect;
if ( srcRect == NULL )
{
srcRect = &_srcRect;
_Rect( 0, 0, m_nBmpSizeX, m_nBmpSizeY, srcRect );
}
// 中心基点絵画機能
if ( m_bCenterDraw == TRUE )
{
int nSizeX = srcRect->right - srcRect->left;
int nSizeY = srcRect->bottom - srcRect->top;
x -= (nSizeX/2) * fScaleX;
y -= (nSizeY/2) * fScaleY;
}
// x, yをD3DXVECTOR2構造体に格納
D3DXVECTOR2 vctPos;
vctPos.x = x;
vctPos.y = y;
// スケール
D3DXVECTOR2 vctScale;
vctScale.x = fScaleX;
vctScale.y = fScaleY;
// 回転の中心
D3DXVECTOR2 vctRtCenter;
vctRtCenter.x = (srcRect->right - srcRect->left) * fRotationCenterX * fScaleX;
vctRtCenter.y = (srcRect->bottom - srcRect->top) * fRotationCenterY * fScaleY;
/* スプライトはアルファオプション効かないっぽい
// アルファオプション
DWORD dwAlphaOptionBkup=0;
if ( dwAlphaOption != MGL_ALPHA_OPT_NOCHANGE )
{
// 戻す時のためにバックアップを取っておく
dwAlphaOptionBkup = m_myudg->GetAlphaMode();
m_myudg->SetAlphaMode( dwAlphaOption );
}*/
// 角度からRadianに。更に左回転になっているので右回転に
float fRad = AngleToRad(-fAngle);
// 絵画
MyuAssert( m_pSprite->Draw( m_pTexture, srcRect, &vctScale, &vctRtCenter, fRad, &vctPos, color ), D3D_OK,
"CMglImage::Draw() m_pSprite->Draw()に失敗" );
/* スプライトはアルファオプション効かないっぽい
// アルファオプションを元に戻す
if ( dwAlphaOption != MGL_ALPHA_OPT_NOCHANGE )
{
m_myudg->SetAlphaMode( dwAlphaOptionBkup );
}*/
}