/*
* singleipconnect()
*
* Note that even on connect fail it returns CURLE_OK, but with 'sock' set to
* CURL_SOCKET_BAD. Other errors will however return proper errors.
*
* singleipconnect() connects to the given IP only, and it may return without
* having connected if used from the multi interface.
*/
static CURLcode
singleipconnect(struct connectdata *conn,
const Curl_addrinfo *ai,
long timeout_ms,
curl_socket_t *sockp,
bool *connected)
{
struct Curl_sockaddr_ex addr;
int rc;
int error = 0;
bool isconnected = FALSE;
struct SessionHandle *data = conn->data;
curl_socket_t sockfd;
CURLcode res = CURLE_OK;
*sockp = CURL_SOCKET_BAD;
*connected = FALSE; /* default is not connected */
res = Curl_socket(conn, ai, &addr, &sockfd);
if(res)
/* Failed to create the socket, but still return OK since we signal the
lack of socket as well. This allows the parent function to keep looping
over alternative addresses/socket families etc. */
return CURLE_OK;
/* store remote address and port used in this connection attempt */
if(!getaddressinfo((struct sockaddr*)&addr.sa_addr,
conn->primary_ip, &conn->primary_port)) {
/* malformed address or bug in inet_ntop, try next address */
error = ERRNO;
failf(data, "sa_addr inet_ntop() failed with errno %d: %s",
error, Curl_strerror(conn, error));
Curl_closesocket(conn, sockfd);
return CURLE_OK;
}
memcpy(conn->ip_addr_str, conn->primary_ip, MAX_IPADR_LEN);
infof(data, " Trying %s...\n", conn->ip_addr_str);
Curl_persistconninfo(conn);
if(data->set.tcp_nodelay)
tcpnodelay(conn, sockfd);
nosigpipe(conn, sockfd);
Curl_sndbufset(sockfd);
if(data->set.tcp_keepalive)
tcpkeepalive(data, sockfd);
if(data->set.fsockopt) {
/* activate callback for setting socket options */
error = data->set.fsockopt(data->set.sockopt_client,
sockfd,
CURLSOCKTYPE_IPCXN);
if(error == CURL_SOCKOPT_ALREADY_CONNECTED)
isconnected = TRUE;
else if(error) {
Curl_closesocket(conn, sockfd); /* close the socket and bail out */
return CURLE_ABORTED_BY_CALLBACK;
}
}
/* possibly bind the local end to an IP, interface or port */
res = bindlocal(conn, sockfd, addr.family);
if(res) {
Curl_closesocket(conn, sockfd); /* close socket and bail out */
return res;
}
/* set socket non-blocking */
curlx_nonblock(sockfd, TRUE);
/* Connect TCP sockets, bind UDP */
if(!isconnected && (conn->socktype == SOCK_STREAM)) {
rc = connect(sockfd, &addr.sa_addr, addr.addrlen);
if(-1 == rc)
error = SOCKERRNO;
conn->connecttime = Curl_tvnow();
if(conn->num_addr > 1)
Curl_expire(data, conn->timeoutms_per_addr);
}
else
rc = 0;
if(-1 == rc) {
switch (error) {
case EINPROGRESS:
case EWOULDBLOCK:
#if defined(EAGAIN)
#if (EAGAIN) != (EWOULDBLOCK)
/* On some platforms EAGAIN and EWOULDBLOCK are the
* same value, and on others they are different, hence
* the odd #if
*/
case EAGAIN:
#endif
#endif
rc = waitconnect(conn, sockfd, timeout_ms);
if(WAITCONN_ABORTED == rc) {
Curl_closesocket(conn, sockfd);
return CURLE_ABORTED_BY_CALLBACK;
}
break;
default:
/* unknown error, fallthrough and try another address! */
failf(data, "Failed to connect to %s: %s",
conn->ip_addr_str, Curl_strerror(conn,error));
data->state.os_errno = error;
break;
}
}
/* The 'WAITCONN_TIMEOUT == rc' comes from the waitconnect(), and not from
connect(). We can be sure of this since connect() cannot return 1. */
if((WAITCONN_TIMEOUT == rc) &&
(data->state.used_interface == Curl_if_multi)) {
/* Timeout when running the multi interface */
*sockp = sockfd;
return CURLE_OK;
}
if(!isconnected)
isconnected = verifyconnect(sockfd, &error);
if(!rc && isconnected) {
/* we are connected, awesome! */
*connected = TRUE; /* this is a true connect */
infof(data, "connected\n");
#ifdef ENABLE_IPV6
conn->bits.ipv6 = (addr.family == AF_INET6)?TRUE:FALSE;
#endif
Curl_updateconninfo(conn, sockfd);
*sockp = sockfd;
return CURLE_OK;
}
else if(WAITCONN_TIMEOUT == rc)
infof(data, "Timeout\n");
else {
data->state.os_errno = error;
infof(data, "%s\n", Curl_strerror(conn, error));
}
/* connect failed or timed out */
Curl_closesocket(conn, sockfd);
return CURLE_OK;
}
/*
* singleipconnect()
*
* Note that even on connect fail it returns CURLE_OK, but with 'sock' set to
* CURL_SOCKET_BAD. Other errors will however return proper errors.
*
* singleipconnect() connects to the given IP only, and it may return without
* having connected.
*/
static CURLcode singleipconnect(struct connectdata *conn,
const Curl_addrinfo *ai,
curl_socket_t *sockp)
{
struct Curl_sockaddr_ex addr;
int rc;
int error = 0;
bool isconnected = FALSE;
struct SessionHandle *data = conn->data;
curl_socket_t sockfd;
CURLcode result;
char ipaddress[MAX_IPADR_LEN];
long port;
bool is_tcp;
*sockp = CURL_SOCKET_BAD;
result = Curl_socket(conn, ai, &addr, &sockfd);
if(result)
/* Failed to create the socket, but still return OK since we signal the
lack of socket as well. This allows the parent function to keep looping
over alternative addresses/socket families etc. */
return CURLE_OK;
/* store remote address and port used in this connection attempt */
if(!getaddressinfo((struct sockaddr*)&addr.sa_addr,
ipaddress, &port)) {
/* malformed address or bug in inet_ntop, try next address */
error = ERRNO;
failf(data, "sa_addr inet_ntop() failed with errno %d: %s",
error, Curl_strerror(conn, error));
Curl_closesocket(conn, sockfd);
return CURLE_OK;
}
infof(data, " Trying %s...\n", ipaddress);
is_tcp = (addr.family == AF_INET || addr.family == AF_INET6) &&
addr.socktype == SOCK_STREAM;
if(is_tcp && data->set.tcp_nodelay)
tcpnodelay(conn, sockfd);
nosigpipe(conn, sockfd);
Curl_sndbufset(sockfd);
if(is_tcp && data->set.tcp_keepalive)
tcpkeepalive(data, sockfd);
if(data->set.fsockopt) {
/* activate callback for setting socket options */
error = data->set.fsockopt(data->set.sockopt_client,
sockfd,
CURLSOCKTYPE_IPCXN);
if(error == CURL_SOCKOPT_ALREADY_CONNECTED)
isconnected = TRUE;
else if(error) {
Curl_closesocket(conn, sockfd); /* close the socket and bail out */
return CURLE_ABORTED_BY_CALLBACK;
}
}
/* possibly bind the local end to an IP, interface or port */
if(addr.family == AF_INET || addr.family == AF_INET6) {
result = bindlocal(conn, sockfd, addr.family,
Curl_ipv6_scope((struct sockaddr*)&addr.sa_addr));
if(result) {
Curl_closesocket(conn, sockfd); /* close socket and bail out */
if(result == CURLE_UNSUPPORTED_PROTOCOL) {
/* The address family is not supported on this interface.
We can continue trying addresses */
return CURLE_COULDNT_CONNECT;
}
return result;
}
}
/* set socket non-blocking */
(void)curlx_nonblock(sockfd, TRUE);
conn->connecttime = Curl_tvnow();
if(conn->num_addr > 1)
Curl_expire_latest(data, conn->timeoutms_per_addr);
/* Connect TCP sockets, bind UDP */
if(!isconnected && (conn->socktype == SOCK_STREAM)) {
rc = connect(sockfd, &addr.sa_addr, addr.addrlen);
if(-1 == rc)
error = SOCKERRNO;
}
else {
*sockp = sockfd;
return CURLE_OK;
}
#ifdef ENABLE_IPV6
conn->bits.ipv6 = (addr.family == AF_INET6)?TRUE:FALSE;
#endif
if(-1 == rc) {
switch(error) {
case EINPROGRESS:
case EWOULDBLOCK:
#if defined(EAGAIN)
#if (EAGAIN) != (EWOULDBLOCK)
/* On some platforms EAGAIN and EWOULDBLOCK are the
* same value, and on others they are different, hence
* the odd #if
*/
case EAGAIN:
#endif
#endif
result = CURLE_OK;
break;
default:
/* unknown error, fallthrough and try another address! */
infof(data, "Immediate connect fail for %s: %s\n",
ipaddress, Curl_strerror(conn,error));
data->state.os_errno = error;
/* connect failed */
Curl_closesocket(conn, sockfd);
result = CURLE_COULDNT_CONNECT;
}
}
if(!result)
*sockp = sockfd;
return result;
}
/*
* singleipconnect()
*
* Note that even on connect fail it returns CURLE_OK, but with 'sock' set to
* CURL_SOCKET_BAD. Other errors will however return proper errors.
*
* singleipconnect() connects to the given IP only, and it may return without
* having connected.
*/
static CURLcode singleipconnect(struct connectdata *conn,
const Curl_addrinfo *ai,
curl_socket_t *sockp)
{
struct Curl_sockaddr_ex addr;
int rc = -1;
int error = 0;
bool isconnected = FALSE;
struct Curl_easy *data = conn->data;
curl_socket_t sockfd;
CURLcode result;
char ipaddress[MAX_IPADR_LEN];
long port;
bool is_tcp;
*sockp = CURL_SOCKET_BAD;
result = Curl_socket(conn, ai, &addr, &sockfd);
if(result)
/* Failed to create the socket, but still return OK since we signal the
lack of socket as well. This allows the parent function to keep looping
over alternative addresses/socket families etc. */
return CURLE_OK;
/* store remote address and port used in this connection attempt */
if(!getaddressinfo((struct sockaddr*)&addr.sa_addr,
ipaddress, &port)) {
/* malformed address or bug in inet_ntop, try next address */
failf(data, "sa_addr inet_ntop() failed with errno %d: %s",
errno, Curl_strerror(conn, errno));
Curl_closesocket(conn, sockfd);
return CURLE_OK;
}
infof(data, " Trying %s...\n", ipaddress);
#ifdef ENABLE_IPV6
is_tcp = (addr.family == AF_INET || addr.family == AF_INET6) &&
addr.socktype == SOCK_STREAM;
#else
is_tcp = (addr.family == AF_INET) && addr.socktype == SOCK_STREAM;
#endif
if(is_tcp && data->set.tcp_nodelay)
Curl_tcpnodelay(conn, sockfd);
nosigpipe(conn, sockfd);
Curl_sndbufset(sockfd);
if(is_tcp && data->set.tcp_keepalive)
tcpkeepalive(data, sockfd);
if(data->set.fsockopt) {
/* activate callback for setting socket options */
error = data->set.fsockopt(data->set.sockopt_client,
sockfd,
CURLSOCKTYPE_IPCXN);
if(error == CURL_SOCKOPT_ALREADY_CONNECTED)
isconnected = TRUE;
else if(error) {
Curl_closesocket(conn, sockfd); /* close the socket and bail out */
return CURLE_ABORTED_BY_CALLBACK;
}
}
/* possibly bind the local end to an IP, interface or port */
if(addr.family == AF_INET
#ifdef ENABLE_IPV6
|| addr.family == AF_INET6
#endif
) {
result = bindlocal(conn, sockfd, addr.family,
Curl_ipv6_scope((struct sockaddr*)&addr.sa_addr));
if(result) {
Curl_closesocket(conn, sockfd); /* close socket and bail out */
if(result == CURLE_UNSUPPORTED_PROTOCOL) {
/* The address family is not supported on this interface.
We can continue trying addresses */
return CURLE_COULDNT_CONNECT;
}
return result;
}
}
/* set socket non-blocking */
(void)curlx_nonblock(sockfd, TRUE);
conn->connecttime = Curl_tvnow();
if(conn->num_addr > 1)
Curl_expire(data, conn->timeoutms_per_addr, EXPIRE_DNS_PER_NAME);
/* Connect TCP sockets, bind UDP */
if(!isconnected && (conn->socktype == SOCK_STREAM)) {
if(conn->bits.tcp_fastopen) {
#if defined(CONNECT_DATA_IDEMPOTENT) /* OS X */
#ifdef HAVE_BUILTIN_AVAILABLE
if(__builtin_available(macOS 10.11, iOS 9.0, tvOS 9.0, watchOS 2.0, *)) {
#endif /* HAVE_BUILTIN_AVAILABLE */
sa_endpoints_t endpoints;
endpoints.sae_srcif = 0;
endpoints.sae_srcaddr = NULL;
endpoints.sae_srcaddrlen = 0;
endpoints.sae_dstaddr = &addr.sa_addr;
endpoints.sae_dstaddrlen = addr.addrlen;
rc = connectx(sockfd, &endpoints, SAE_ASSOCID_ANY,
CONNECT_RESUME_ON_READ_WRITE | CONNECT_DATA_IDEMPOTENT,
NULL, 0, NULL, NULL);
#ifdef HAVE_BUILTIN_AVAILABLE
}
else {
rc = connect(sockfd, &addr.sa_addr, addr.addrlen);
}
#endif /* HAVE_BUILTIN_AVAILABLE */
#elif defined(MSG_FASTOPEN) /* Linux */
if(conn->given->flags & PROTOPT_SSL)
rc = connect(sockfd, &addr.sa_addr, addr.addrlen);
else
rc = 0; /* Do nothing */
#endif
}
else {
