/*************************************************************************
module :[読取り原稿サイズの確保]
function :[
1.
]
return :[0:SYS_DOCUMENT_A4_SIZE
1:SYS_DOCUMENT_B4_SIZE
2:SYS_DOCUMENT_A3_SIZE
]
common :[]
condition :[]
comment :[戻り値の確認は\src\atlanta\define\sysdoc.hで定義されている値を使用すること
ANZUの最大読みとり幅はB4なのでH8用のパスを使用 1995/09/12 Eguchi
ポプラはＡ３読み取りがあるので変更 1996/11/28 By T.Yamaguchi ]
machine :[SH7043]
language :[SHC]
keyword :[CMN]
date :[1993/12/13]
author :[吉川弘康]
*************************************************************************/
UBYTE CMN_GetDocumentScanSize(void)
{
#if (PRO_SCAN_WIDTH == A3WIDTH) /* A3の機種はこのパスが必要 */
if (DA3()) { /** A document is A3 size **/
switch(CHK_ScanningWidth()) {
case SYS_DOCUMENT_A3_SIZE:
return(SYS_DOCUMENT_A3_SIZE);
case SYS_DOCUMENT_B4_SIZE:
return(SYS_DOCUMENT_B4_SIZE);
case SYS_DOCUMENT_A4_SIZE:
return(SYS_DOCUMENT_A4_SIZE);
}
}
#endif
if (DB4()) { /** A document is B4 size **/
switch(CHK_ScanningWidth()) {
case SYS_DOCUMENT_A3_SIZE:
case SYS_DOCUMENT_B4_SIZE:
return(SYS_DOCUMENT_B4_SIZE);
case SYS_DOCUMENT_A4_SIZE:
return(SYS_DOCUMENT_A4_SIZE);
}
}
else { /** A document is A4 size **/
return(SYS_DOCUMENT_A4_SIZE);
}
}
void LCD1602::DB(uint8_t data)
{
RW(false);
E(false);
DB4(data >> 4);
E(true);
LCD_DELAY_WRITE;
E(false);
LCD_DELAY_WRITE;
DB4(data & 0x0F);
E(true);
LCD_DELAY_WRITE;
E(false);
LCD_DELAY_WRITE;
}
void LCD1602::Init()
{
PinInit();
Brightness(false);
RW(false);
RS(false);
DB4(0);
E(false);
// Wait 50 ms from power on
delay_ms(50);
DB4(3);
// Run three clock cycles to init
E(true);
LCD_DELAY_SHORT;
E(false);
LCD_DELAY_LONG;
E(true);
LCD_DELAY_SHORT;
E(false);
LCD_DELAY_SHORT;
E(true);
LCD_DELAY_SHORT;
E(false);
LCD_DELAY_SHORT;
// Configure display
DB4(2);
E(true);
LCD_DELAY_SHORT;
E(false);
LCD_DELAY_LONG;
DB(0x28);
LCD_DELAY_SHORT;
DB(0x8);
LCD_DELAY_SHORT;
DB(0x1);
LCD_DELAY_SHORT;
DB(0x6);
LCD_DELAY_SHORT;
RS(false);
DB(0x0c);
LCD_DELAY_LONG;
// Test code, TODO
Locate(0, 0);
Print(" ld analyzer b1 ");
Locate(0, 1);
Print(" analyzer-1 ");
//Brightness(true);
Contrast(false);
// Enable SCT peripheral clock
CGU_ConfigPWR(CGU_PERIPHERAL_SCT, ENABLE);
LPC_CCU1->CLK_M4_SCT_CFG |= CCU1_CLK_M4_SCT_CFG_RUN_Msk;
while(!(LPC_CCU1->CLK_M4_SCT_STAT & CCU1_CLK_M4_SCT_STAT_RUN_Msk));
scu_pinmux(0x1, 5, GPIO_PUP, FUNC1); // CTOUT_10
LPC_SCT->CONFIG = (1 << 17);
LPC_SCT->CTRL_L |= (12-1) << 5;
LPC_SCT->MATCHREL[0].L = 100-1;
LPC_SCT->MATCHREL[1].L = 1;
LPC_SCT->EVENT[0].STATE = 0xFFFFFFFF;
LPC_SCT->EVENT[0].CTRL = (1 << 12);
LPC_SCT->EVENT[1].STATE = 0xFFFFFFFF;
LPC_SCT->EVENT[1].CTRL = (1 << 12) | (1 << 0);
LPC_SCT->OUT[10].SET = (1 << 0);
LPC_SCT->OUT[10].CLR = (1 << 1);
LPC_SCT->CTRL_L &= ~(1 << 2);
InitFont();
// Fade in
for (int i = 0; i < 100; i++)
{
LPC_SCT->MATCHREL[1].L = i;
delay_ms(10);
}
}
