Esempi in C++ (Cpp) per DEV_OK

Esempio n. 1

File: btuart_cs.c Progetto: GodFox/magx_kernel_xpixl

static int btuart_event(event_t event, int priority, event_callback_args_t *args)
{
	dev_link_t *link = args->client_data;
	btuart_info_t *info = link->priv;

	switch (event) {
	case CS_EVENT_CARD_REMOVAL:
		link->state &= ~DEV_PRESENT;
		if (link->state & DEV_CONFIG) {
			btuart_close(info);
			btuart_release(link);
		}
		break;
	case CS_EVENT_CARD_INSERTION:
		link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
		btuart_config(link);
		break;
	case CS_EVENT_PM_SUSPEND:
		link->state |= DEV_SUSPEND;
		/* Fall through... */
	case CS_EVENT_RESET_PHYSICAL:
		if (link->state & DEV_CONFIG)
			pcmcia_release_configuration(link->handle);
		break;
	case CS_EVENT_PM_RESUME:
		link->state &= ~DEV_SUSPEND;
		/* Fall through... */
	case CS_EVENT_CARD_RESET:
		if (DEV_OK(link))
			pcmcia_request_configuration(link->handle, &link->conf);
		break;
	}

	return 0;
}

Esempio n. 2

File: parport_cs.c Progetto: GunioRobot/MI424WR_GEN2_Rev_E-F

int parport_event(event_t event, int priority,
		  event_callback_args_t *args)
{
    dev_link_t *link = args->client_data;

    DEBUG(1, "parport_event(0x%06x)\n", event);
    
    switch (event) {
    case CS_EVENT_CARD_REMOVAL:
	link->state &= ~DEV_PRESENT;
	if (link->state & DEV_CONFIG)
	    mod_timer(&link->release, jiffies + HZ/20);
	break;
    case CS_EVENT_CARD_INSERTION:
	link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
	parport_config(link);
	break;
    case CS_EVENT_PM_SUSPEND:
	link->state |= DEV_SUSPEND;
	/* Fall through... */
    case CS_EVENT_RESET_PHYSICAL:
	if (link->state & DEV_CONFIG)
	    CardServices(ReleaseConfiguration, link->handle);
	break;
    case CS_EVENT_PM_RESUME:
	link->state &= ~DEV_SUSPEND;
	/* Fall through... */
    case CS_EVENT_CARD_RESET:
	if (DEV_OK(link))
	    CardServices(RequestConfiguration, link->handle, &link->conf);
	break;
    }
    return 0;
} /* parport_event */

Esempio n. 3

int ide_event(event_t event, int priority,
	      event_callback_args_t *args)
{
    dev_link_t *link = args->client_data;

    DEBUG(1, "ide_event(0x%06x)\n", event);
    
    switch (event) {
    case CS_EVENT_CARD_REMOVAL:
	link->state &= ~DEV_PRESENT;
	if (link->state & DEV_CONFIG)
		ide_release(link);
	break;
    case CS_EVENT_CARD_INSERTION:
	link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
	ide_config(link);
	break;
    case CS_EVENT_PM_SUSPEND:
	link->state |= DEV_SUSPEND;
	/* Fall through... */
    case CS_EVENT_RESET_PHYSICAL:
	if (link->state & DEV_CONFIG)
	    pcmcia_release_configuration(link->handle);
	break;
    case CS_EVENT_PM_RESUME:
	link->state &= ~DEV_SUSPEND;
	/* Fall through... */
    case CS_EVENT_CARD_RESET:
	if (DEV_OK(link))
	    pcmcia_request_configuration(link->handle, &link->conf);
	break;
    }
    return 0;
} /* ide_event */

Esempio n. 4

File: ide-cs.c Progetto: GunioRobot/MI424WR_GEN2_Rev_E-F

int ide_event(event_t event, int priority,
	      event_callback_args_t *args)
{
    dev_link_t *link = args->client_data;
    ide_info_t *info = link->priv;

    DEBUG(1, "ide_event(0x%06x)\n", event);
    
    switch (event) {
    case CS_EVENT_CARD_REMOVAL:
	link->state &= ~DEV_PRESENT;
	if (link->state & DEV_CONFIG)
	    schedule_task(&info->rel_task);
	break;
    case CS_EVENT_CARD_INSERTION:
	link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
	ide_config(link);
	break;
    case CS_EVENT_PM_SUSPEND:
	link->state |= DEV_SUSPEND;
	/* Fall through... */
    case CS_EVENT_RESET_PHYSICAL:
	if (link->state & DEV_CONFIG)
	    CardServices(ReleaseConfiguration, link->handle);
	break;
    case CS_EVENT_PM_RESUME:
	link->state &= ~DEV_SUSPEND;
	/* Fall through... */
    case CS_EVENT_CARD_RESET:
	if (DEV_OK(link))
	    CardServices(RequestConfiguration, link->handle, &link->conf);
	break;
    }
    return 0;
} /* ide_event */

Esempio n. 5

File: bluecard_cs.c Progetto: GunioRobot/MI424WR_GEN2_Rev_E-F

int bluecard_event(event_t event, int priority, event_callback_args_t *args)
{
	dev_link_t *link = args->client_data;
	bluecard_info_t *info = link->priv;

	switch (event) {
	case CS_EVENT_CARD_REMOVAL:
		link->state &= ~DEV_PRESENT;
		if (link->state & DEV_CONFIG) {
			bluecard_close(info);
			mod_timer(&link->release, jiffies + HZ / 20);
		}
		break;
	case CS_EVENT_CARD_INSERTION:
		link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
		bluecard_config(link);
		break;
	case CS_EVENT_PM_SUSPEND:
		link->state |= DEV_SUSPEND;
		/* Fall through... */
	case CS_EVENT_RESET_PHYSICAL:
		if (link->state & DEV_CONFIG)
			CardServices(ReleaseConfiguration, link->handle);
		break;
	case CS_EVENT_PM_RESUME:
		link->state &= ~DEV_SUSPEND;
		/* Fall through... */
	case CS_EVENT_CARD_RESET:
		if (DEV_OK(link))
			CardServices(RequestConfiguration, link->handle, &link->conf);
		break;
	}

	return 0;
}

Esempio n. 6

File: ixj_pcmcia.c Progetto: ena30/snake-os

static int ixj_resume(struct pcmcia_device *dev)
{
	dev_link_t *link = dev_to_instance(dev);

	link->state &= ~DEV_SUSPEND;
	if (DEV_OK(link))
		pcmcia_request_configuration(link->handle, &link->conf);

	return 0;
}

Esempio n. 7

File: vxpocket.c Progetto: BackupTheBerlios/tew632-brp-svn

/*
 * event callback
 */
static int vxpocket_event(event_t event, int priority, event_callback_args_t *args)
{
	dev_link_t *link = args->client_data;
	vx_core_t *chip = link->priv;

	switch (event) {
	case CS_EVENT_CARD_REMOVAL:
		snd_printdd(KERN_DEBUG "CARD_REMOVAL..\n");
		link->state &= ~DEV_PRESENT;
		if (link->state & DEV_CONFIG)
			chip->chip_status |= VX_STAT_IS_STALE;
		break;
	case CS_EVENT_CARD_INSERTION:
		snd_printdd(KERN_DEBUG "CARD_INSERTION..\n");
		link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
		vxpocket_config(link);
		break;
#ifdef CONFIG_PM
	case CS_EVENT_PM_SUSPEND:
		snd_printdd(KERN_DEBUG "SUSPEND\n");
		link->state |= DEV_SUSPEND;
		if (chip && chip->card->pm_suspend) {
			snd_printdd(KERN_DEBUG "snd_vx_suspend calling\n");
			chip->card->pm_suspend(chip->card, PMSG_SUSPEND);
		}
		/* Fall through... */
	case CS_EVENT_RESET_PHYSICAL:
		snd_printdd(KERN_DEBUG "RESET_PHYSICAL\n");
		if (link->state & DEV_CONFIG)
			pcmcia_release_configuration(link->handle);
		break;
	case CS_EVENT_PM_RESUME:
		snd_printdd(KERN_DEBUG "RESUME\n");
		link->state &= ~DEV_SUSPEND;
		/* Fall through... */
	case CS_EVENT_CARD_RESET:
		snd_printdd(KERN_DEBUG "CARD_RESET\n");
		if (DEV_OK(link)) {
			//struct snd_vxpocket *vxp = (struct snd_vxpocket *)chip;
			snd_printdd(KERN_DEBUG "requestconfig...\n");
			pcmcia_request_configuration(link->handle, &link->conf);
			if (chip && chip->card->pm_resume) {
				snd_printdd(KERN_DEBUG "calling snd_vx_resume\n");
				chip->card->pm_resume(chip->card);
			}
		}
		snd_printdd(KERN_DEBUG "resume done!\n");
		break;
#endif
	}
	return 0;
}

Esempio n. 8

File: 3c589_cs.c Progetto: GunioRobot/MI424WR_GEN2_Rev_E-F

static struct net_device_stats *el3_get_stats(struct net_device *dev)
{
    struct el3_private *lp = (struct el3_private *)dev->priv;
    unsigned long flags;
    dev_link_t *link = &lp->link;

    if (DEV_OK(link)) {
	save_flags(flags);
	cli();
	update_stats(dev);
	restore_flags(flags);
    }
    return &lp->stats;
}

Esempio n. 9

File: serial_cs.c Progetto: kzlin129/tt-gpl

static void serial_resume(dev_link_t *link)
{
	link->state &= ~DEV_SUSPEND;

	if (DEV_OK(link)) {
		struct serial_info *info = link->priv;
		int i;

		if (!info->slave)
			pcmcia_request_configuration(link->handle, &link->conf);

		for (i = 0; i < info->ndev; i++)
			serial8250_resume_port(info->line[i]);
	}
}

Esempio n. 10

File: aironet4500_cs.c Progetto: GunioRobot/MI424WR_GEN2_Rev_E-F

static int awc_pcmcia_open(struct net_device *dev)
{
	dev_link_t *link;
	int status;
	
	for (link = dev_list; link; link = link->next)
		if (link->priv == dev) break;
	if (!DEV_OK(link))
		return -ENODEV;
	
	status = awc_open(dev);
	
	if (!status )
		link->open++;
	
	return status;
}

Esempio n. 11

File: serial_cs.c Progetto: ena30/snake-os

static int serial_resume(struct pcmcia_device *dev)
{
	dev_link_t *link = dev_to_instance(dev);
	link->state &= ~DEV_SUSPEND;

	if (DEV_OK(link)) {
		struct serial_info *info = link->priv;
		int i;

		if (!info->slave)
			pcmcia_request_configuration(link->handle, &link->conf);

		for (i = 0; i < info->ndev; i++)
			serial8250_resume_port(info->line[i]);
	}

	return 0;
}

Esempio n. 12

File: nmclan_cs.c Progetto: ena30/snake-os

/* ----------------------------------------------------------------------------
mace_open
	Open device driver.
---------------------------------------------------------------------------- */
static int mace_open(struct net_device *dev)
{
  kio_addr_t ioaddr = dev->base_addr;
  mace_private *lp = netdev_priv(dev);
  dev_link_t *link = &lp->link;

  if (!DEV_OK(link))
    return -ENODEV;

  link->open++;

  MACEBANK(0);

  netif_start_queue(dev);
  nmclan_reset(dev);

  return 0; /* Always succeed */
} /* mace_open */

Esempio n. 13

File: pdaudiocf-2.6.16.c Progetto: canalplus/r7oss

static int pdacf_resume(struct pcmcia_device *dev)
{
	dev_link_t *link = dev_to_instance(dev);
	struct snd_pdacf *chip = link->priv;

	snd_printdd(KERN_DEBUG "RESUME\n");
	link->state &= ~DEV_SUSPEND;

	snd_printdd(KERN_DEBUG "CARD_RESET\n");
	if (DEV_OK(link)) {
		snd_printdd(KERN_DEBUG "requestconfig...\n");
		pcmcia_request_configuration(link->handle, &link->conf);
		if (chip) {
			snd_printdd(KERN_DEBUG "calling snd_pdacf_resume\n");
			snd_pdacf_resume(chip);
		}
	}
	snd_printdd(KERN_DEBUG "resume done!\n");

	return 0;
}

Esempio n. 14

File: 3c589_cs.c Progetto: GunioRobot/MI424WR_GEN2_Rev_E-F

static int el3_open(struct net_device *dev)
{
    struct el3_private *lp = (struct el3_private *)dev->priv;
    dev_link_t *link = &lp->link;
    
    if (!DEV_OK(link))
	return -ENODEV;

    link->open++;
    MOD_INC_USE_COUNT;
    netif_start_queue(dev);
    
    tc589_reset(dev);
    lp->media.function = &media_check;
    lp->media.data = (u_long)lp;
    lp->media.expires = jiffies + HZ;
    add_timer(&lp->media);

    DEBUG(1, "%s: opened, status %4.4x.\n",
	  dev->name, inw(dev->base_addr + EL3_STATUS));
    
    return 0;
}

Esempio n. 15

File: fmvj18x_cs.c Progetto: dmgerman/original

static int fjn_open(struct net_device *dev)
{
    struct local_info_t *lp = (struct local_info_t *)dev->priv;
    dev_link_t *link = &lp->link;

    DEBUG(4, "fjn_open('%s').\n", dev->name);

    if (!DEV_OK(link))
	return -ENODEV;
    
    link->open++;
    
    fjn_reset(dev);
    
    lp->tx_started = 0;
    lp->tx_queue = 0;
    lp->tx_queue_len = 0;
    lp->open_time = jiffies;
    netif_start_queue(dev);
    
    MOD_INC_USE_COUNT;

    return 0;
} /* fjn_open */