DFBResult
pxa3xxEngineSync( void *drv, void *dev )
{
DFBResult ret = DFB_OK;
PXA3XXDriverData *pdrv = drv;
PXA3XXGfxSharedArea *shared = pdrv->gfx_shared;
D_DEBUG_AT( PXA3XX_BLT, "%s()\n", __FUNCTION__ );
DUMP_INFO();
while (shared->hw_running && ioctl( pdrv->gfx_fd, PXA3XX_GCU_IOCTL_WAIT_IDLE ) < 0) {
if (errno == EINTR)
continue;
ret = errno2result( errno );
D_PERROR( "PXA3XX/BLT: PXA3XX_GCU_IOCTL_WAIT_IDLE failed!\n" );
direct_log_printf( NULL, " -> %srunning, hw %d-%d, next %d-%d - %svalid\n", \
pdrv->gfx_shared->hw_running ? "" : "not ", \
pdrv->gfx_shared->hw_start, \
pdrv->gfx_shared->hw_end, \
pdrv->gfx_shared->next_start, \
pdrv->gfx_shared->next_end, \
pdrv->gfx_shared->next_valid ? "" : "not " );
break;
}
if (ret == DFB_OK) {
D_ASSERT( !shared->hw_running );
}
return ret;
}
/*
* Blend a rectangle using the alpha value from the color using the current hardware state.
*/
static bool
pxa3xxBlitBlendColorAlpha( void *drv, void *dev, DFBRectangle *rect, int x, int y )
{
PXA3XXDriverData *pdrv = drv;
PXA3XXDeviceData *pdev = dev;
u32 *prep = start_buffer( pdrv, 9 );
D_DEBUG_AT( PXA3XX_BLT, "%s( %d, %d - %dx%d -> %d, %d )\n",
__FUNCTION__, DFB_RECTANGLE_VALS( rect ), x, y );
DUMP_INFO();
prep[0] = 0x47000138;
prep[1] = x;
prep[2] = y;
prep[3] = rect->x;
prep[4] = rect->y;
prep[5] = x;
prep[6] = y;
prep[7] = PXA3XX_WH( rect->w, rect->h );
prep[8] = (pdev->color.a << 24) | (pdev->color.a << 16);
submit_buffer( pdrv, 9 );
return true;
}
static DFBResult
flush_prepared( PXA3XXDriverData *pdrv )
{
int result;
D_DEBUG_AT( PXA3XX_BLT, "%s()\n", __FUNCTION__ );
DUMP_INFO();
D_ASSERT( pdrv->prep_num < PXA3XX_GCU_BUFFER_WORDS );
D_ASSERT( pdrv->prep_num <= D_ARRAY_SIZE(pdrv->prep_buf) );
/* Something prepared? */
if (pdrv->prep_num) {
result = write( pdrv->gfx_fd, pdrv->prep_buf, pdrv->prep_num * 4 );
if (result < 0) {
D_PERROR( "PXA3XX/BLT: write() failed!\n" );
return DFB_IO;
}
pdrv->prep_num = 0;
}
return DFB_OK;
}
static inline DFBResult
start_hardware( PXA3XXDriverData *pdrv )
{
PXA3XXGfxSharedArea *shared = pdrv->gfx_shared;
D_DEBUG_AT( PXA3XX_BLT, "%s()\n", __FUNCTION__ );
DUMP_INFO();
D_ASSERT( shared->next_valid );
if (shared->hw_running || shared->next_end == shared->next_start)
return DFB_FAILURE;
shared->hw_running = true;
shared->hw_start = shared->next_start;
shared->hw_end = shared->next_end;
shared->next_start = shared->next_end = (shared->hw_end + 63) & ~0x3f;
shared->num_words += shared->hw_end - shared->hw_start;
shared->num_starts++;
DUMP_INFO();
D_ASSERT( shared->buffer[shared->hw_end] == 0x08000000 );
#ifdef PXA3XX_GCU_REG_USE_IOCTLS
ioctl( pdrv->gfx_fd, PXA3XX_GCU_IOCTL_START );
#else
mb();
PXA_GCRBLR = 0;
PXA_GCRBBR = shared->buffer_phys + shared->hw_start*4;
PXA_GCRBTR = shared->buffer_phys + shared->hw_end*4;
PXA_GCRBLR = ((shared->hw_end - shared->hw_start + 63) & ~0x3f) * 4;
mb();
#endif
return DFB_OK;
}
void
pxa3xxEngineReset( void *drv, void *dev )
{
PXA3XXDriverData *pdrv = drv;
D_DEBUG_AT( PXA3XX_BLT, "%s()\n", __FUNCTION__ );
DUMP_INFO();
ioctl( pdrv->gfx_fd, PXA3XX_GCU_IOCTL_RESET );
}
/*
* Render a blended rectangle using the current hardware state.
*
* As the hardware does not directly support this, we blit a single
* pixel with blending.
*/
static bool
pxa3xxFillRectangleBlend( void *drv, void *dev, DFBRectangle *rect )
{
PXA3XXDriverData *pdrv = drv;
PXA3XXDeviceData *pdev = dev;
u32 *prep = start_buffer( pdrv, 22 );
const u32 format = pixel_formats[DFB_PIXELFORMAT_INDEX( DSPF_ARGB )];
D_DEBUG_AT( PXA3XX_BLT, "%s( %d, %d - %dx%d )\n", __FUNCTION__,
DFB_RECTANGLE_VALS( rect ) );
DUMP_INFO();
/* Set fake destination. */
prep[0] = 0x020000A2;
prep[1] = pdev->fake_phys;
prep[2] = (format << 19) | 4;
/* Fill rectangle. */
prep[3] = 0x40000014 | (format << 8);
prep[4] = 0;
prep[5] = 0;
prep[6] = PXA3XX_WH( rect->w, 1 );
prep[7] = PIXEL_ARGB( pdev->color.a, pdev->color.r, pdev->color.g, pdev->color.b );
/* Restore destination. */
prep[8] = 0x020000A2;
prep[9] = pdev->dst_phys;
prep[10] = (pixel_formats[pdev->dst_index] << 19) | (pdev->dst_pitch << 5) | pdev->dst_bpp;
/* Set fake buffer as source. */
prep[11] = 0x02000002;
prep[12] = pdev->fake_phys;
prep[13] = (format << 19) | 4;
/* Blit with blending. */
prep[14] = 0x47000107;
prep[15] = rect->x;
prep[16] = rect->y;
prep[17] = 0;
prep[18] = 0;
prep[19] = rect->x;
prep[20] = rect->y;
prep[21] = PXA3XX_WH( rect->w, rect->h );
submit_buffer( pdrv, 22 );
/* Clear the flag. */
PXA3XX_INVALIDATE( SOURCE );
return true;
}
/*
* Render a filled rectangle using the current hardware state.
*/
static bool
pxa3xxFillRectangle( void *drv, void *dev, DFBRectangle *rect )
{
PXA3XXDriverData *pdrv = drv;
u32 *prep = start_buffer( pdrv, 4 );
D_DEBUG_AT( PXA3XX_BLT, "%s( %d, %d - %dx%d )\n", __FUNCTION__,
DFB_RECTANGLE_VALS( rect ) );
DUMP_INFO();
prep[0] = 0x40000003;
prep[1] = rect->x;
prep[2] = rect->y;
prep[3] = PXA3XX_WH( rect->w, rect->h );
submit_buffer( pdrv, 4 );
return true;
}
/*
* Blit a glyph with alpha blending and colorizing using the current hardware state.
*/
static bool
pxa3xxBlitGlyph( void *drv, void *dev, DFBRectangle *rect, int x, int y )
{
PXA3XXDriverData *pdrv = drv;
PXA3XXDeviceData *pdev = dev;
u32 *prep = start_buffer( pdrv, 40 );
const u32 format = pixel_formats[DFB_PIXELFORMAT_INDEX( DSPF_ARGB )];
D_DEBUG_AT( PXA3XX_BLT, "%s( %d, %d - %dx%d )\n", __FUNCTION__,
DFB_RECTANGLE_VALS( rect ) );
DUMP_INFO();
if (rect->w * (rect->h + 1) * 4 > pdev->fake_size)
return false;
/* Set fake destination. */
prep[0] = 0x020000A2;
prep[1] = pdev->fake_phys;
prep[2] = (format << 19) | ((rect->w << 2) << 5) | 4;
/* Fill first row of fake buffer. */
prep[3] = 0x40000014 | (format << 8);
prep[4] = 0;
prep[5] = 0;
prep[6] = PXA3XX_WH( rect->w, 1 );
prep[7] = PIXEL_ARGB( pdev->color.a, pdev->color.r, pdev->color.g, pdev->color.b );
/* Set first row of fake buffer as source1. */
prep[8] = 0x02000012;
prep[9] = pdev->fake_phys;
prep[10] = (format << 19) | 4;
/* Blit with blending. */
prep[11] = 0x47000118;
prep[12] = 0;
prep[13] = 1;
prep[14] = rect->x;
prep[15] = rect->y;
prep[16] = 0;
prep[17] = 0;
prep[18] = PXA3XX_WH( rect->w, rect->h );
prep[19] = 0;
/* Restore destination. */
prep[20] = 0x020000A2;
prep[21] = pdev->dst_phys;
prep[22] = (pixel_formats[pdev->dst_index] << 19) | (pdev->dst_pitch << 5) | pdev->dst_bpp;
/* Restore source1 to destination. */
prep[23] = 0x02000012;
prep[24] = prep[21];
prep[25] = prep[22];
/* Set fake buffer as source0. */
prep[26] = 0x02000002;
prep[27] = pdev->fake_phys;
prep[28] = (format << 19) | ((rect->w << 2) << 5) | 4;
/* Blit with blending. */
prep[29] = 0x47000107;
prep[30] = x;
prep[31] = y;
prep[32] = 0;
prep[33] = 1;
prep[34] = x;
prep[35] = y;
prep[36] = PXA3XX_WH( rect->w, rect->h );
/* Restore source0. */
prep[37] = 0x02000002;
prep[38] = pdev->src_phys;
prep[39] = (pixel_formats[pdev->src_index] << 19) | (pdev->src_pitch << 5) | pdev->src_bpp;
submit_buffer( pdrv, 40 );
return true;
}
/*
* Blit a rectangle using the current hardware state.
*/
static bool
pxa3xxBlit( void *drv, void *dev, DFBRectangle *rect, int x, int y )
{
PXA3XXDriverData *pdrv = drv;
PXA3XXDeviceData *pdev = dev;
u32 rotation = 0;
u32 *prep = start_buffer( pdrv, 6 );
D_DEBUG_AT( PXA3XX_BLT, "%s( %d, %d - %dx%d -> %d, %d )\n",
__FUNCTION__, DFB_RECTANGLE_VALS( rect ), x, y );
DUMP_INFO();
if (pdev->bflags & DSBLIT_ROTATE90)
rotation = 3;
else if (pdev->bflags & DSBLIT_ROTATE180)
rotation = 2;
else if (pdev->bflags & DSBLIT_ROTATE270)
rotation = 1;
prep[0] = 0x4A000005 | (rotation << 4); // FIXME: use 32byte alignment hint
prep[1] = x;
prep[2] = y;
prep[3] = rect->x;
prep[4] = rect->y;
prep[5] = PXA3XX_WH( rect->w, rect->h );
submit_buffer( pdrv, 6 );
/* RASTER
prep[0] = 0x4BCC0007;
prep[1] = x;
prep[2] = y;
prep[3] = rect->x;
prep[4] = rect->y;
prep[5] = rect->x;
prep[6] = rect->y;
prep[7] = PXA3XX_WH( rect->w, rect->h );
submit_buffer( pdrv, 8 );
*/
/* PATTERN
prep[0] = 0x4C000006;
prep[1] = x;
prep[2] = y;
prep[3] = rect->x;
prep[4] = rect->y;
prep[5] = PXA3XX_WH( rect->w, rect->h );
prep[6] = PXA3XX_WH( rect->w, rect->h );
submit_buffer( pdrv, 7 );
*/
/* BIAS
prep[0] = 0x49000016;
prep[1] = x;
prep[2] = y;
prep[3] = rect->x;
prep[4] = rect->y;
prep[5] = PXA3XX_WH( rect->w, rect->h );
prep[6] = 0;
submit_buffer( pdrv, 7 );
*/
return true;
}
/*
* Make sure that the hardware is programmed for execution of 'accel' according to the 'state'.
*/
void
pxa3xxSetState( void *drv,
void *dev,
GraphicsDeviceFuncs *funcs,
CardState *state,
DFBAccelerationMask accel )
{
PXA3XXDriverData *pdrv = drv;
PXA3XXDeviceData *pdev = dev;
StateModificationFlags modified = state->mod_hw;
D_DEBUG_AT( PXA3XX_BLT, "%s( %p, 0x%08x ) <- modified 0x%08x\n",
__FUNCTION__, state, accel, modified );
DUMP_INFO();
/*
* 1) Invalidate hardware states
*
* Each modification to the hw independent state invalidates one or more hardware states.
*/
/* Simply invalidate all? */
if (modified == SMF_ALL) {
PXA3XX_INVALIDATE( ALL );
}
else if (modified) {
/* Invalidate destination registers. */
if (modified & SMF_DESTINATION)
PXA3XX_INVALIDATE( DEST | COLOR );
/* Invalidate source registers. */
if (modified & SMF_SOURCE)
PXA3XX_INVALIDATE( SOURCE );
/* Invalidate color registers. */
if (modified & SMF_COLOR)
PXA3XX_INVALIDATE( COLOR );
}
/*
* 2) Validate hardware states
*
* Each function has its own set of states that need to be validated.
*/
/* Always requiring valid destination. */
PXA3XX_CHECK_VALIDATE( DEST );
/* Depending on the function... */
switch (accel) {
case DFXL_FILLRECTANGLE:
/* ...require valid color. */
PXA3XX_CHECK_VALIDATE( COLOR );
if (state->drawingflags & DSDRAW_BLEND)
funcs->FillRectangle = pxa3xxFillRectangleBlend;
else
funcs->FillRectangle = pxa3xxFillRectangle;
/*
* 3) Tell which functions can be called without further validation, i.e. SetState()
*
* When the hw independent state is changed, this collection is reset.
*/
state->set = PXA3XX_SUPPORTED_DRAWINGFUNCTIONS;
break;
case DFXL_BLIT:
case DFXL_STRETCHBLIT:
/* ...require valid source. */
PXA3XX_CHECK_VALIDATE( SOURCE );
if (state->blittingflags & DSBLIT_BLEND_ALPHACHANNEL && pdev->src_alpha) {
if (state->blittingflags & DSBLIT_COLORIZE)
funcs->Blit = pxa3xxBlitGlyph;
else
funcs->Blit = pxa3xxBlitBlend;
}
else {
if (state->blittingflags & DSBLIT_BLEND_COLORALPHA)
funcs->Blit = pxa3xxBlitBlendColorAlpha;
else
funcs->Blit = pxa3xxBlit;
}
/*
* 3) Tell which functions can be called without further validation, i.e. SetState()
*
* When the hw independent state is changed, this collection is reset.
*/
state->set = PXA3XX_SUPPORTED_BLITTINGFUNCTIONS;
break;
default:
D_BUG( "unexpected drawing/blitting function" );
break;
}
pdev->dflags = state->drawingflags;
pdev->bflags = state->blittingflags;
pdev->render_options = state->render_options;
pdev->color = state->color;
/*
* 4) Clear modification flags
*
* All flags have been evaluated in 1) and remembered for further validation.
* If the hw independent state is not modified, this function won't get called
* for subsequent rendering functions, unless they aren't defined by 3).
*/
state->mod_hw = 0;
}
static DFBResult
flush_prepared( PXA3XXDriverData *pdrv )
{
PXA3XXGfxSharedArea *shared = pdrv->gfx_shared;
D_DEBUG_AT( PXA3XX_BLT, "%s()\n", __FUNCTION__ );
DUMP_INFO();
D_ASSERT( pdrv->prep_num < PXA3XX_GCU_BUFFER_WORDS );
D_ASSERT( pdrv->prep_num <= D_ARRAY_SIZE(pdrv->prep_buf) );
/* Something prepared? */
while (pdrv->prep_num) {
int timeout = 2;
int next_end;
/* Mark shared information as invalid. From this point on the interrupt handler
* will not continue with the next block, and we'll start the hardware ourself. */
shared->next_valid = false;
mb();
/* Check if there's enough space at the end.
* Wait until hardware has started next block before it gets too big. */
if (shared->next_end + pdrv->prep_num >= PXA3XX_GCU_BUFFER_WORDS ||
shared->next_end - shared->next_start >= PXA3XX_GCU_BUFFER_WORDS/4)
{
/* If there's no next block waiting, start at the beginning. */
if (shared->next_start == shared->next_end)
shared->next_start = shared->next_end = 0;
else {
D_ASSERT( shared->buffer[shared->hw_end] == 0x08000000 );
/* Mark area as valid again. */
shared->next_valid = true;
mb();
/* Start in case it got idle while doing the checks. */
if (start_hardware( pdrv )) {
/*
* Hardware has not been started (still running).
* Check for timeout. */
if (!timeout--) {
D_ERROR( "PXA3XX/Blt: Timeout waiting for processing!\n" );
direct_log_printf( NULL, " -> %srunning, hw %d-%d, next %d-%d - %svalid\n", \
pdrv->gfx_shared->hw_running ? "" : "not ", \
pdrv->gfx_shared->hw_start, \
pdrv->gfx_shared->hw_end, \
pdrv->gfx_shared->next_start, \
pdrv->gfx_shared->next_end, \
pdrv->gfx_shared->next_valid ? "" : "not " );
D_ASSERT( shared->buffer[shared->hw_end] == 0x08000000 );
// pxa3xxEngineReset( pdrv, pdrv->dev );
return DFB_TIMEOUT;
}
/* Wait til next block is started. */
ioctl( pdrv->gfx_fd, PXA3XX_GCU_IOCTL_WAIT_NEXT );
}
/* Start over with the checks. */
continue;
}
}
/* We are appending in case there was already a next block. */
next_end = shared->next_end + pdrv->prep_num;
/* Reset the timeout counter. */
timeout = 20;
/* While the hardware is running... */
while (shared->hw_running) {
D_ASSERT( shared->buffer[shared->hw_end] == 0x08000000 );
/* ...make sure we don't over lap with its current buffer, otherwise wait. */
if (shared->hw_start > next_end || shared->hw_end < shared->next_start)
break;
/* Check for timeout. */
if (!timeout--) {
D_ERROR( "PXA3XX/Blt: Timeout waiting for space!\n" );
direct_log_printf( NULL, " -> %srunning, hw %d-%d, next %d-%d - %svalid\n", \
pdrv->gfx_shared->hw_running ? "" : "not ", \
pdrv->gfx_shared->hw_start, \
pdrv->gfx_shared->hw_end, \
pdrv->gfx_shared->next_start, \
pdrv->gfx_shared->next_end, \
pdrv->gfx_shared->next_valid ? "" : "not " );
D_ASSERT( shared->buffer[shared->hw_end] == 0x08000000 );
// pxa3xxEngineReset( pdrv, pdrv->dev );
return DFB_TIMEOUT;
}
/* Wait til next block is started. */
ioctl( pdrv->gfx_fd, PXA3XX_GCU_IOCTL_WAIT_NEXT );
}
/* Copy from local to shared buffer. */
direct_memcpy( (void*) &shared->buffer[shared->next_end], &pdrv->prep_buf[0], pdrv->prep_num * sizeof(u32) );
/* Terminate the block. */
shared->buffer[next_end] = 0x08000000;
/* Update next block information and mark valid. */
shared->next_end = next_end;
mb();
shared->next_valid = true;
/* Reset local counter. */
pdrv->prep_num = 0;
/* Start in case it is idle. */
return start_hardware( pdrv );
}
return DFB_OK;
}
void comm_error(uint16_t errnr, uint16_t param) {
// FIXME: embed sender id to error number, we got dem bits
struct { uint16_t nr, sender, arg; } x = {errnr, MY_ID, param};
DUMP_INFO(MSG_ERR, x);
}
