//--------------------------------------------------------------------------------------
// Entry point to the program. Initializes everything and goes into a message processing
// loop. Idle time is used to render the scene.
//--------------------------------------------------------------------------------------
int WINAPI wWinMain(HINSTANCE /*hInstance*/, HINSTANCE /*hPrevInstance*/, LPWSTR /*lpCmdLine*/, INT /*nCmdShow*/)
{
// Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
_CrtSetDbgFlag(_CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF);
#endif
// Set DXUT callbacks
DXUTSetCallbackDeviceChanging(ModifyDeviceSettings);
DXUTSetCallbackMsgProc(MsgProc);
DXUTSetCallbackKeyboard(OnKeyboard);
DXUTSetCallbackFrameMove(OnFrameMove);
DXUTSetCallbackD3D11DeviceAcceptable(IsD3D11DeviceAcceptable);
DXUTSetCallbackD3D11DeviceCreated(OnD3D11CreateDevice);
DXUTSetCallbackD3D11SwapChainResized(OnD3D11ResizedSwapChain);
DXUTSetCallbackD3D11FrameRender(OnD3D11FrameRender);
DXUTSetCallbackD3D11SwapChainReleasing(OnD3D11ReleasingSwapChain);
DXUTSetCallbackD3D11DeviceDestroyed(OnD3D11DestroyDevice);
InitApp();
DXUTInit(true, true, NULL); // Parse the command line, show msgboxes on error, no extra command line params
DXUTSetCursorSettings(true, true); // Show the cursor and clip it when in full screen
DXUTCreateWindow(L"CascadedShadowDepthMap");
CWaitDlg CompilingShadersDlg;
if (DXUT_EnsureD3D11APIs())
CompilingShadersDlg.ShowDialog(L"Compiling Shaders and loading models.");
DXUTCreateDevice(D3D_FEATURE_LEVEL_10_0, true, 800, 600);
CompilingShadersDlg.DestroyDialog();
DXUTMainLoop(); // Enter into the DXUT render loop
return DXUTGetExitCode();
}
INT WINAPI wWinMain( HINSTANCE, HINSTANCE, LPWSTR, int ) {
d3d_engine = new D3DEngine();
// Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
_CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif
// DXUT will create and use the best device (either D3D9 or D3D10)
// that is available on the system depending on which D3D callbacks are set below
// Set DXUT callbacks
DXUTSetCallbackD3D10DeviceAcceptable( IsD3D10DeviceAcceptable );
DXUTSetCallbackD3D10DeviceCreated( OnD3D10CreateDevice );
DXUTSetCallbackD3D10SwapChainResized( OnD3D10ResizedSwapChain );
DXUTSetCallbackD3D10SwapChainReleasing( OnD3D10ReleasingSwapChain );
DXUTSetCallbackD3D10DeviceDestroyed( OnD3D10DestroyDevice );
DXUTSetCallbackD3D10FrameRender( OnD3D10FrameRender );
DXUTSetCallbackMsgProc( MsgProc );
DXUTSetCallbackKeyboard( OnKeyboard );
DXUTSetCallbackFrameMove( OnFrameMove );
DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );
DXUTInit(true, true, NULL); // DXUTを初期化(詳しくはMSDN)
DXUTSetCursorSettings(true, true); // カーソルを表示し、全画面の時には、領域からはみ出ないようにします
DXUTCreateWindow(kWindowTitle);
DXUTCreateDevice(true, kWindowWidth, kWindowHeight);
DXUTMainLoop(); // DXUTのレンダリングループを開始
return DXUTGetExitCode();
}
//--------------------------------------------------------------------------------------
// Entry point to the program. Initializes everything and goes into a message processing
// loop. Idle time is used to render the scene.
//--------------------------------------------------------------------------------------
int WINAPI wWinMain( HINSTANCE hInstance, HINSTANCE hPrevInstance, LPWSTR lpCmdLine, int nCmdShow )
{
// Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
_CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif
DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );
DXUTSetCallbackMsgProc( MsgProc );
DXUTSetCallbackKeyboard( KeyboardProc );
DXUTSetCallbackFrameMove( OnFrameMove );
DXUTSetCallbackD3D11DeviceAcceptable( IsD3D11DeviceAcceptable );
DXUTSetCallbackD3D11DeviceCreated( OnD3D11CreateDevice );
DXUTSetCallbackD3D11SwapChainResized( OnD3D11ResizedSwapChain );
DXUTSetCallbackD3D11FrameRender( OnD3D11FrameRender );
DXUTSetCallbackD3D11SwapChainReleasing( OnD3D11ReleasingSwapChain );
DXUTSetCallbackD3D11DeviceDestroyed( OnD3D11DestroyDevice );
InitApp();
DXUTInit( true, true ); // Use this line instead to try to create a hardware device
DXUTSetCursorSettings( true, true ); // Show the cursor and clip it when in full screen
DXUTCreateWindow( L"AdaptiveTessellationCS40" );
DXUTCreateDevice(D3D_FEATURE_LEVEL_10_0, true, 1024, 768 );
DXUTMainLoop(); // Enter into the DXUT render loop
return DXUTGetExitCode();
}
//--------------------------------------------------------------------------------------
// Entry point to the program. Initializes everything and goes into a message processing
// loop. Idle time is used to render the scene.
//--------------------------------------------------------------------------------------
INT WINAPI WinMain( HINSTANCE, HINSTANCE, LPSTR, int )
{
// Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
_CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif
// DXUT will create and use the best device (either D3D9 or D3D10)
// that is available on the system depending on which D3D callbacks are set below
// Set DXUT callbacks
DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );
DXUTSetCallbackMsgProc( MsgProc );
DXUTSetCallbackKeyboard( KeyboardProc );
DXUTSetCallbackFrameMove( OnFrameMove );
DXUTSetCallbackD3D10DeviceAcceptable( IsD3D10DeviceAcceptable );
DXUTSetCallbackD3D10DeviceCreated( OnD3D10CreateDevice );
DXUTSetCallbackD3D10SwapChainResized( OnD3D10SwapChainResized );
DXUTSetCallbackD3D10SwapChainReleasing( OnD3D10ReleasingSwapChain );
DXUTSetCallbackD3D10DeviceDestroyed( OnD3D10DestroyDevice );
DXUTSetCallbackD3D10FrameRender( OnD3D10FrameRender );
InitApp();
DXUTInit( true, true, NULL ); // Parse the command line, show msgboxes on error, no extra command line params
DXUTSetCursorSettings( true, true ); // Show the cursor and clip it when in full screen
DXUTCreateWindow( L"D3D10 Shader Model 4.0 Workshop: Exercise03" );
DXUTCreateDevice( true, 800, 600 );
DXUTMainLoop(); // Enter into the DXUT render loop
return DXUTGetExitCode();
}
//--------------------------------------------------------------------------------------
// Entry point to the program. Initializes everything and goes into a message processing
// loop. Idle time is used to render the scene.
//--------------------------------------------------------------------------------------
INT WINAPI wWinMain( HINSTANCE, HINSTANCE, LPWSTR, int )
{
// Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
_CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif
// DXUT will create and use the best device (either D3D9 or D3D10)
// that is available on the system depending on which D3D callbacks are set below
// Set DXUT callbacks
DXUTSetCallbackD3D9DeviceAcceptable( IsDeviceAcceptable );
DXUTSetCallbackD3D9DeviceCreated( OnCreateDevice );
DXUTSetCallbackD3D9DeviceReset( OnResetDevice );
DXUTSetCallbackD3D9FrameRender( OnFrameRender );
DXUTSetCallbackD3D9DeviceLost( OnLostDevice );
DXUTSetCallbackD3D9DeviceDestroyed( OnDestroyDevice );
DXUTSetCallbackMsgProc( MsgProc );
DXUTSetCallbackKeyboard( KeyboardProc );
DXUTSetCallbackFrameMove( OnFrameMove );
DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );
DXUTSetCursorSettings( true, true );
InitApp();
DXUTInit( true, true ); // Parse the command line and show msgboxes
DXUTSetHotkeyHandling( true, true, true );
DXUTCreateWindow( L"CompiledEffect" );
DXUTCreateDevice( true, 640, 480 );
DXUTMainLoop();
return DXUTGetExitCode();
}
INT WINAPI WinMain( HINSTANCE, HINSTANCE, LPSTR, int )
{
// Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
_CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif
// Set the callback functions
DXUTSetCallbackDeviceCreated( OnCreateDevice );
DXUTSetCallbackDeviceReset( OnResetDevice );
DXUTSetCallbackDeviceLost( OnLostDevice );
DXUTSetCallbackDeviceDestroyed( OnDestroyDevice );
DXUTSetCallbackMsgProc( MsgProc );
DXUTSetCallbackKeyboard( KeyboardProc );
DXUTSetCallbackFrameRender( OnFrameRender );
DXUTSetCallbackFrameMove( OnFrameMove );
// Initialize world matrices
// D3DXMatrixScaling( &g_mCellWorld, 1.0f, GROUND_Y / 3.0f, 1.0f );
// Initialize DXUT and create the desired Win32 window and Direct3D device for the application
DXUTInit( true, true, true ); // Parse the command line, handle the default hotkeys, and show msgboxes
DXUTSetCursorSettings( true, true ); // Show the cursor and clip it when in full screen
DXUTCreateWindow( L"d3dapp" );
DXUTCreateDevice( D3DADAPTER_DEFAULT, true, 640, 480, IsDeviceAcceptable, ModifyDeviceSettings );
MyAppInit();
// Start the render loop
DXUTMainLoop();
// TODO: Perform any application-level cleanup here
return DXUTGetExitCode();
}
int WINAPI wWinMain( _In_ HINSTANCE hInstance, _In_opt_ HINSTANCE hPrevInstance, _In_ LPWSTR lpCmdLine, _In_ int nCmdShow )
{
// 디바이스 생성후 삭제를 안하면, 경고
#ifdef _DEBUG
_CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif
// 업데이트
DXUTSetCallbackFrameMove(OnFrameMove);
// 키보드
//DXUTSetCallbackKeyboard();
// 메시지 프로시져
DXUTSetCallbackMsgProc(MsgProc);
DXUTSetCallbackD3D11DeviceCreated(OnD3D11DeviceCreated);
// 화면 크기 변환, 이동 , 전환 호출되는 함수
DXUTSetCallbackD3D11SwapChainResized(OnD3D11ResizedSwapChain);
DXUTSetCallbackD3D11FrameRender(OnD3D11FrameRender);
// 화면 크기 변환, 이동 , 전환 호출되는 함수
DXUTSetCallbackD3D11SwapChainReleasing(OnD3D11ReleasingSwapChain);
DXUTSetCallbackD3D11DeviceDestroyed(OnD3D11DeviceDestroyed);
DXUTInit( true, true, nullptr );
DXUTSetCursorSettings( true, true );
DXUTCreateWindow( L"006 MD5Mesh" );
DXUTCreateDevice( D3D_FEATURE_LEVEL_10_0, true, 800, 600 );
DXUTMainLoop();
return DXUTGetExitCode();
}
//--------------------------------------------------------------------------------------
// Entry point to the program. Initializes everything and goes into a message processing
// loop. Idle time is used to render the scene.
//--------------------------------------------------------------------------------------
int WINAPI wWinMain( HINSTANCE hInstance, HINSTANCE hPrevInstance, LPWSTR lpCmdLine, int nCmdShow )
{
// Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
_CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif
// DXUT will create and use the best device (either D3D9 or D3D11)
// that is available on the system depending on which D3D callbacks are set below
// Set DXUT callbacks
DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );
DXUTSetCallbackMsgProc( MsgProc );
DXUTSetCallbackKeyboard( OnKeyboard );
DXUTSetCallbackFrameMove( OnFrameMove );
DXUTSetCallbackD3D11DeviceAcceptable( IsD3D11DeviceAcceptable );
DXUTSetCallbackD3D11DeviceCreated( OnD3D11CreateDevice );
DXUTSetCallbackD3D11SwapChainResized( OnD3D11ResizedSwapChain );
DXUTSetCallbackD3D11FrameRender( OnD3D11FrameRender );
DXUTSetCallbackD3D11SwapChainReleasing( OnD3D11ReleasingSwapChain );
DXUTSetCallbackD3D11DeviceDestroyed( OnD3D11DestroyDevice );
InitApp();
DXUTInit( true, true, NULL ); // Parse the command line, show msgboxes on error, no extra command line params
DXUTSetCursorSettings( true, true ); // Show the cursor and clip it when in full screen
DXUTCreateWindow( L"BasicHLSL11" );
DXUTCreateDevice (D3D_FEATURE_LEVEL_11_0, true, 800, 600 );
//DXUTCreateDevice(true, 640, 480);
DXUTMainLoop(); // Enter into the DXUT render loop
return DXUTGetExitCode();
}
INT WINAPI wWinMain(HINSTANCE, HINSTANCE, LPWSTR, int)
{
DXUTSetCallbackD3D9DeviceAcceptable(IsDeviceAcceptable);
DXUTSetCallbackD3D9DeviceCreated(OnCreateDevice);
DXUTSetCallbackD3D9FrameRender(OnFrameRender);
DXUTSetCallbackD3D9DeviceReset(OnResetDevice);
DXUTSetCallbackD3D9DeviceLost(OnLostDevice);
DXUTSetCallbackD3D9DeviceDestroyed(OnDestroyDevice);
DXUTSetCallbackMsgProc(MsgProc);
DXUTSetCallbackKeyboard(KeyboardProc);
DXUTSetCallbackMouse(MouseProc, true);
DXUTSetCallbackFrameMove(OnFrameMove);
DXUTSetCallbackDeviceChanging(ModifyDeviceSettings);
DXUTSetCursorSettings(true, true);
InitApp();
DXUTInit();
DXUTSetHotkeyHandling();
DXUTCreateWindow(L"NsRenju by Ivan Goremykin");
DXUTCreateDevice(true, 1024, 768);
DXUTMainLoop();
return DXUTGetExitCode();
}
INT WINAPI WinMain(HINSTANCE, HINSTANCE, LPSTR, int)
{
g_cgContext = cgCreateContext();
checkForCgError("creating context");
cgSetParameterSettingMode(g_cgContext, CG_DEFERRED_PARAMETER_SETTING);
DXUTSetCallbackDeviceReset(OnResetDevice);
DXUTSetCallbackDeviceLost(OnLostDevice);
DXUTSetCallbackFrameRender(OnFrameRender);
/* Parse command line, handle default hotkeys, and show messages. */
DXUTInit();
DXUTCreateWindow(g_strWindowTitleW);
/* Display 400x400 window. */
DXUTCreateDevice(D3DADAPTER_DEFAULT, true, 400, 400);
DXUTMainLoop();
cgDestroyProgram(g_cgVertexProgram);
checkForCgError("destroying vertex program");
cgDestroyContext(g_cgContext);
return DXUTGetExitCode();
}
//--------------------------------------------------------------------------------------
// Entry point to the program. Initializes everything and goes into a message processing
// loop. Idle time is used to render the scene.
//--------------------------------------------------------------------------------------
int WINAPI wWinMain( HINSTANCE hInstance, HINSTANCE hPrevInstance,
LPWSTR lpCmdLine, int nCmdShow )
{
// Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
_CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif
// Disable gamma correction on this sample
DXUTSetIsInGammaCorrectMode( false );
DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );
DXUTSetCallbackMsgProc( MsgProc );
DXUTSetCallbackFrameMove( OnFrameMove );
DXUTSetCallbackMouse( MouseProc );
DXUTSetCallbackKeyboard( OnKeyboard );
DXUTSetCallbackD3D11DeviceAcceptable( IsD3D11DeviceAcceptable );
DXUTSetCallbackD3D11DeviceCreated( OnD3D11CreateDevice );
DXUTSetCallbackD3D11SwapChainResized( OnD3D11ResizedSwapChain );
DXUTSetCallbackD3D11FrameRender( OnD3D11FrameRender );
DXUTSetCallbackD3D11SwapChainReleasing( OnD3D11ReleasingSwapChain );
DXUTSetCallbackD3D11DeviceDestroyed( OnD3D11DestroyDevice );
InitApp();
DXUTInit( true, true );
DXUTSetCursorSettings( true, true );// Show the cursor and clip when in full screen
DXUTCreateWindow( L"Contact Hardening Shadows - Direct3D 11" );
DXUTCreateDevice( D3D_FEATURE_LEVEL_11_0, true, 800, 600 );
DXUTMainLoop(); // Enter into the DXUT render loop
return DXUTGetExitCode();
}
//--------------------------------------------------------------------------------------
// Entry point to the program. Initializes everything and goes into a message processing
// loop. Idle time is used to render the scene.
//--------------------------------------------------------------------------------------
int WINAPI wWinMain(HINSTANCE /*hInstance*/, HINSTANCE /*hPrevInstance*/, LPWSTR /*lpCmdLine*/, int /*nCmdShow*/)
{
// Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
_CrtSetDbgFlag(_CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF);
#endif
// Disable gamma correction on this sample
DXUTSetIsInGammaCorrectMode(false);
DXUTSetCallbackDeviceChanging(ModifyDeviceSettings);
DXUTSetCallbackMsgProc(MsgProc);
DXUTSetCallbackFrameMove(OnFrameMove);
DXUTSetCallbackD3D11DeviceAcceptable(IsD3D11DeviceAcceptable);
DXUTSetCallbackD3D11DeviceCreated(OnD3D11CreateDevice);
DXUTSetCallbackD3D11SwapChainResized(OnD3D11ResizedSwapChain);
DXUTSetCallbackD3D11FrameRender(OnD3D11FrameRender);
DXUTSetCallbackD3D11SwapChainReleasing(OnD3D11ReleasingSwapChain);
DXUTSetCallbackD3D11DeviceDestroyed(OnD3D11DestroyDevice);
InitApp();
// Force create a ref device so that feature level D3D_FEATURE_LEVEL_11_0 is guaranteed
DXUTInit(true, true, NULL); // Parse the command line, show msgboxes on error
DXUTSetCursorSettings(true, true); // Show the cursor and clip it when in full screen
DXUTCreateWindow(L"OIT11");
DXUTCreateDevice(D3D_FEATURE_LEVEL_11_0, true, g_nFrameWidth, g_nFrameHeight);
DXUTMainLoop(); // Enter into the DXUT render loop
return DXUTGetExitCode();
}
//--------------------------------------------------------------------------------------
// Initialize everything and go into a render loop
//--------------------------------------------------------------------------------------
INT WINAPI WinMain( HINSTANCE, HINSTANCE, LPSTR, int )
{
// Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
_CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif
DXUTCreateState();
// onexit(DeleteDXUTState);
DXUTSetCallbackMsgProc(MsgProc);
// DXUTSetCallbackKeyboard(OnKeyboard);
DXUTSetCallbackFrameMove(OnFrameMove);
DXUTSetCallbackDeviceChanging(ModifyDeviceSettings);
// DXUTSetCallbackShutdown(ExitApp);
// Set the callback functions
DXUTSetCallbackD3D9DeviceAcceptable(IsDeviceAcceptable);
DXUTSetCallbackD3D9DeviceCreated( OnCreateDevice );
DXUTSetCallbackD3D9DeviceReset( OnResetDevice );
DXUTSetCallbackD3D9DeviceLost( OnLostDevice );
DXUTSetCallbackD3D9DeviceDestroyed( OnDestroyDevice );
DXUTSetCallbackD3D9FrameRender( OnFrameRender );
// TODO: Perform any application-level initialization here
WCHAR buffer[MAX_PATH];
GetCurrentDirectory(MAX_PATH, buffer);
SetCurrentDirectory(L"Resources\\map0\\");
GetCurrentDirectory(MAX_PATH, buffer);
g_pTerrain = TerrainPager::Create("major", 272); // 272 = 16 * 16 + 16
g_pDFRWindow = new DoubleFrustumRectangle(*g_pTerrain);
// Initialize DXUT and create the desired Win32 window and Direct3D device for the application
DXUTInit( true, true, nullptr ); // Parse the command line, handle the default hotkeys, and show msgboxes
DXUTSetCursorSettings( true, true ); // Show the cursor and clip it when in full screen
DXUTCreateWindow( L"TerrainPaging" );
DXUTCreateDevice( true, 640, 480 );
// Start the render loop
DXUTMainLoop();
int exit_code = DXUTGetExitCode();
DXUTDestroyState();
// TODO: Perform any application-level cleanup here
if(NULL != g_pDFRWindow)
{
delete g_pDFRWindow;
g_pDFRWindow = NULL;
}
if(NULL != g_pTerrain)
{
delete g_pTerrain;
g_pTerrain = NULL;
}
return exit_code;
}
//入口
INT WINAPI WinMain( HINSTANCE, HINSTANCE, LPSTR, int )
{
//各种相应函数
DXUTSetCallbackDeviceCreated( OnCreateDevice );
DXUTSetCallbackDeviceReset( OnResetDevice );
DXUTSetCallbackDeviceLost( OnLostDevice );
DXUTSetCallbackDeviceDestroyed( OnDestroyDevice );
DXUTSetCallbackMsgProc( MsgProc );
DXUTSetCallbackKeyboard( KeyboardProc );
DXUTSetCallbackFrameRender( OnFrameRender );
DXUTSetCallbackFrameMove( OnFrameMove );
DXUTSetCursorSettings( true, true );
InitApp();
// 创建 窗口
DXUTInit( true, true, true );
DXUTCreateWindow( L"Water Drop" );
DXUTCreateDevice( D3DADAPTER_DEFAULT, true, 700, 700, IsDeviceAcceptable, ModifyDeviceSettings );
//由于最大化会造成形变，这里我们禁用最大化
HWND hWnd=GetActiveWindow();
LONG style=GetWindowLong(hWnd,GWL_STYLE);
style &=~(WS_MAXIMIZEBOX);
SetWindowLong(hWnd,GWL_STYLE,style);
DXUTMainLoop();
return DXUTGetExitCode();
}
//--------------------------------------------------------------------------------------
// Entry point to the program. Initializes everything and goes into a message processing
// loop. Idle time is used to render the scene.
//--------------------------------------------------------------------------------------
int WINAPI wWinMain( HINSTANCE hInstance, HINSTANCE hPrevInstance, LPWSTR lpCmdLine, int nCmdShow )
{
// Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
_CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif
// _crtBreakAlloc = 862;
// DXUT will create and use the best device (either D3D9 or D3D10)
// that is available on the system depending on which D3D callbacks are set below
// Set DXUT callbacks
DXUTSetCallbackMsgProc( MsgProc );
DXUTSetCallbackKeyboard( OnKeyboard );
DXUTSetCallbackFrameMove( OnFrameMove );
DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );
DXUTSetCallbackD3D9DeviceAcceptable( IsD3D9DeviceAcceptable );
DXUTSetCallbackD3D9DeviceCreated( OnD3D9CreateDevice );
DXUTSetCallbackD3D9DeviceReset( OnD3D9ResetDevice );
DXUTSetCallbackD3D9DeviceLost( OnD3D9LostDevice );
DXUTSetCallbackD3D9DeviceDestroyed( OnD3D9DestroyDevice );
DXUTSetCallbackD3D9FrameRender( OnD3D9FrameRender );
InitApp();
DXUTInit( true, true, NULL ); // Parse the command line, show msgboxes on error, no extra command line params
DXUTSetCursorSettings( true, true );
DXUTCreateWindow( L"SimpleSample" );
DXUTCreateDevice( true, g_nWinSizeX, g_nWinSizeY);
DXUTMainLoop(); // Enter into the DXUT render loop
return DXUTGetExitCode();
}
//--------------------------------------------------------------------------------------
// Initialize everything and go into a render loop
//--------------------------------------------------------------------------------------
INT WINAPI wWinMain( HINSTANCE, HINSTANCE, LPWSTR, int )
{
// Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
_CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif
// Set the callback functions
DXUTSetCallbackD3D9DeviceAcceptable( IsD3D9DeviceAcceptable );
DXUTSetCallbackD3D9DeviceCreated( OnD3D9CreateDevice );
DXUTSetCallbackD3D9DeviceReset( OnD3D9ResetDevice );
DXUTSetCallbackD3D9FrameRender( OnD3D9FrameRender );
DXUTSetCallbackD3D9DeviceLost( OnD3D9LostDevice );
DXUTSetCallbackD3D9DeviceDestroyed( OnD3D9DestroyDevice );
DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );
DXUTSetCallbackMsgProc( MsgProc );
DXUTSetCallbackFrameMove( OnFrameMove );
// TODO: Perform any application-level initialization here
// Initialize DXUT and create the desired Win32 window and Direct3D device for the application
DXUTInit( true, true ); // Parse the command line and show msgboxes
DXUTSetHotkeyHandling( true, true, true ); // handle the default hotkeys
DXUTSetCursorSettings( true, true ); // Show the cursor and clip it when in full screen
DXUTCreateWindow( L"Game" );
DXUTCreateDevice( true, 800, 600 );
// Start the render loop
DXUTMainLoop();
// TODO: Perform any application-level cleanup here
return DXUTGetExitCode();
}
//--------------------------------------------------------------------------------------
// Initialize everything and go into a render loop
//--------------------------------------------------------------------------------------
INT WINAPI wWinMain( HINSTANCE, HINSTANCE, LPWSTR lpCmdLine, int nShowCmd)
{
wchar_t executableFullPath[MAX_PATH];
GetModuleFileName( NULL, executableFullPath, MAX_PATH );
wchar_t executableDrive[MAX_PATH];
wchar_t executableDir[MAX_PATH];
_wsplitpath_s(executableFullPath, executableDrive, MAX_PATH, executableDir, MAX_PATH, 0, 0, 0, 0);
wchar_t currentDir[MAX_PATH] = { L'\0' };
wcscat_s(currentDir, executableDrive);
wcscat_s(currentDir, executableDir);
wcscat_s(currentDir, L"..\\");
BOOL result = SetCurrentDirectory(currentDir);
ASSERT(result != FALSE, "Can't change current directory.");
// Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
_CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif
// Set the callback functions
DXUTSetCallbackD3D9DeviceAcceptable( IsD3D9DeviceAcceptable );
DXUTSetCallbackD3D9DeviceCreated( OnD3D9CreateDevice );
DXUTSetCallbackD3D9DeviceReset( OnD3D9ResetDevice );
DXUTSetCallbackD3D9FrameRender( OnD3D9FrameRender );
DXUTSetCallbackD3D9DeviceLost( OnD3D9LostDevice );
DXUTSetCallbackD3D9DeviceDestroyed( OnD3D9DestroyDevice );
DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );
DXUTSetCallbackMsgProc( MsgProc );
DXUTSetCallbackFrameMove( OnFrameMove );
// Initialize DXUT and create the desired Win32 window and Direct3D device for the application
// Parse the command line and show msgboxes
DXUTInit( true, true );
// Handle the default hotkeys
DXUTSetHotkeyHandling( true, true, true );
// Show the cursor and clip it when in full screen
DXUTSetCursorSettings( true, true );
DXUTCreateWindow(L"GPU Pro 5 : 'Quaternions revisited'");
DXUTCreateDevice(true, 1280, 720);
// Start the render loop
DXUTMainLoop();
return DXUTGetExitCode();
}
INT WINAPI wWinMain( HINSTANCE, HINSTANCE, LPWSTR, int )
{
HRESULT hr = S_OK;
#if defined(DEBUG) | defined(_DEBUG)
_CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif
DXUTSetCallbackD3D9DeviceAcceptable( IsDeviceAcceptable );
DXUTSetCallbackD3D9DeviceCreated( OnCreateDevice );
DXUTSetCallbackD3D9FrameRender( OnFrameRender );
DXUTSetCallbackD3D9DeviceReset( OnResetDevice );
DXUTSetCallbackD3D9DeviceLost( OnLostDevice );
DXUTSetCallbackD3D9DeviceDestroyed( OnDestroyDevice );
DXUTSetCallbackMsgProc( MsgProc );
DXUTSetCallbackFrameMove( OnFrameMove );
DXUTSetCallbackKeyboard( KeyboardProc );
DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );
DXUTSetCursorSettings( false, true );
DXUTInit( true, true );
DXUTSetHotkeyHandling( false, false, false );
InitApp();
hr = PrepareAudio();
if( FAILED( hr ) )
{
OutputDebugString( L"PrepareAudio() failed. Disabling audio support\n" );
}
DXUTCreateWindow( L"Buser Stima" );
DXUTCreateDevice( false, 0, 0 );
DXUTMainLoop();
CleanupAudio();
return DXUTGetExitCode();
}
//--------------------------------------------------------------------------------------
// Entry point to the program. Initializes everything and goes into a message processing
// loop. Idle time is used to render the scene.
//--------------------------------------------------------------------------------------
INT WINAPI WinMain( HINSTANCE, HINSTANCE, LPSTR, int )
{
// Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
_CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif
// Set the callback functions. These functions allow DXUT to notify
// the application about device changes, user input, and windows messages. The
// callbacks are optional so you need only set callbacks for events you're interested
// in. However, if you don't handle the device reset/lost callbacks then the sample
// framework won't be able to reset your device since the application must first
// release all device resources before resetting. Likewise, if you don't handle the
// device created/destroyed callbacks then DXUT won't be able to
// recreate your device resources.
DXUTSetCallbackD3D9DeviceAcceptable( IsDeviceAcceptable );
DXUTSetCallbackD3D9DeviceCreated( OnCreateDevice );
DXUTSetCallbackD3D9DeviceReset( OnResetDevice );
DXUTSetCallbackD3D9DeviceLost( OnLostDevice );
DXUTSetCallbackD3D9DeviceDestroyed( OnDestroyDevice );
DXUTSetCallbackMsgProc( MsgProc );
DXUTSetCallbackKeyboard( KeyboardProc );
DXUTSetCallbackD3D9FrameRender( OnFrameRender );
DXUTSetCallbackFrameMove( OnFrameMove );
// Show the cursor and clip it when in full screen
DXUTSetCursorSettings( true, true );
if (InitApp())
{
// Initialize DXUT and create the desired Win32 window and Direct3D
// device for the application. Calling each of these functions is optional, but they
// allow you to set several options which control the behavior of the framework.
DXUTInit( true, true ); // Parse the command line, handle the default hotkeys, and show msgboxes
DXUTCreateWindow( L"UWGame" );
g_Sound.Initialize( DXUTGetHWND(), DSSCL_PRIORITY );
DXUTCreateDevice( true, 800, 600 );
// Pass control to DXUT for handling the message pump and
// dispatching render calls. DXUT will call your FrameMove
// and FrameRender callback when there is idle time between handling window messages.
DXUTMainLoop();
CleanupApp();
}
return DXUTGetExitCode();
}
//--------------------------------------------------------------------------------------
// Initialize everything and go into a render loop
//--------------------------------------------------------------------------------------
int WINAPI wWinMain( HINSTANCE hInstance, HINSTANCE hPrevInstance, LPWSTR lpCmdLine, int nCmdShow )
{
// Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
_CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif
// DXUT will create and use the best device (either D3D9 or D3D11)
// that is available on the system depending on which D3D callbacks are set below
// Set general DXUT callbacks
DXUTSetCallbackFrameMove( OnFrameMove );
DXUTSetCallbackKeyboard( OnKeyboard );
DXUTSetCallbackMouse( OnMouse );
DXUTSetCallbackMsgProc( MsgProc );
DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );
DXUTSetCallbackDeviceRemoved( OnDeviceRemoved );
// Set the D3D9 DXUT callbacks. Remove these sets if the app doesn't need to support D3D9
DXUTSetCallbackD3D9DeviceAcceptable( IsD3D9DeviceAcceptable );
DXUTSetCallbackD3D9DeviceCreated( OnD3D9CreateDevice );
DXUTSetCallbackD3D9DeviceReset( OnD3D9ResetDevice );
DXUTSetCallbackD3D9FrameRender( OnD3D9FrameRender );
DXUTSetCallbackD3D9DeviceLost( OnD3D9LostDevice );
DXUTSetCallbackD3D9DeviceDestroyed( OnD3D9DestroyDevice );
// Set the D3D11 DXUT callbacks. Remove these sets if the app doesn't need to support D3D11
DXUTSetCallbackD3D11DeviceAcceptable( IsD3D11DeviceAcceptable );
DXUTSetCallbackD3D11DeviceCreated( OnD3D11CreateDevice );
DXUTSetCallbackD3D11SwapChainResized( OnD3D11ResizedSwapChain );
DXUTSetCallbackD3D11FrameRender( OnD3D11FrameRender );
DXUTSetCallbackD3D11SwapChainReleasing( OnD3D11ReleasingSwapChain );
DXUTSetCallbackD3D11DeviceDestroyed( OnD3D11DestroyDevice );
// Perform any application-level initialization here
DXUTInit( true, true, NULL ); // Parse the command line, show msgboxes on error, no extra command line params
DXUTSetCursorSettings( true, true ); // Show the cursor and clip it when in full screen
DXUTCreateWindow( L"Awe Engine" );
// Only require 10-level hardware
DXUTCreateDevice( D3D_FEATURE_LEVEL_10_0, true, 640, 480 );
DXUTMainLoop(); // Enter into the DXUT ren der loop
// Perform any application-level cleanup here
return DXUTGetExitCode();
}
/**
* @brief
* Entry point to the program. Initializes everything and goes into a message processing
* loop. Idle time is used to render the scene.
*
*/
int WINAPI _tWinMain(HINSTANCE, HINSTANCE, LPTSTR, int)
{
// Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
_CrtSetDbgFlag(_CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF);
#endif
// Show the cursor and clip it when in full screen
DXUTSetCursorSettings(true, true);
// Initialize DXUT and create the desired Win32 window and Direct3D
// device for the application. Calling each of these functions is optional, but they
// allow you to set several options which control the behavior of the framework.
DXUTInit(true, true); // Parse the command line and show msgboxes
DXUTSetHotkeyHandling(true, true, true); // handle the defaul hotkeys
DXUTCreateWindow(GameConfiguration::s_GAME_TITLE.c_str());
try {
// We need to set up DirectSound after we have a window.
GameApplication::initialize();
GameApplication::setCallbackFunctions();
DXUTCreateDevice(true, GameConfiguration::s_BACK_BUFFER_WIDTH, GameConfiguration::s_BACK_BUFFER_HEIGHT);
// Pass control to DXUT for handling the message pump and
// dispatching render calls. DXUT will call your FrameMove
// and FrameRender callback when there is idle time between handling window messages.
DXUTMainLoop();
} catch (acut::Exception& ex) {
// TODO: 詳細なメッセージを表示する
// TODO: log
acut::ExceptionHandler::handleException(ex);
MessageBox(NULL, _T("エラーが発生しました。\nゲームを終了します。"), _T("エラー発生"), MB_ICONEXCLAMATION);
GameApplication::onDeviceLost(NULL);
}
try {
// Perform any application-level cleanup here. Direct3D device resources are released within the
// appropriate callback functions and therefore don't require any cleanup code here.
GameApplication::finalize();
} catch (acut::Exception& ex) {
acut::ExceptionHandler::handleException(ex);
MessageBox(NULL, _T("ゲーム終了処理でエラーが発生しました。"), _T("エラー発生"), MB_ICONEXCLAMATION);
}
return DXUTGetExitCode();
}
//--------------------------------------------------------------------------------------
// Initialization
//--------------------------------------------------------------------------------------
void InitializeDirectX( )
{
DXUTSetCallbackD3D11DeviceCreated( OnCreateDevice );
DXUTSetCallbackD3D11FrameRender( OnFrameRender );
DXUTSetCallbackD3D11DeviceDestroyed( OnDestroyDevice );
DXUTSetCallbackD3D11SwapChainResized( OnResizedSwapChain );
DXUTSetCallbackMsgProc( MsgProc );
DXUTSetCallbackFrameMove( OnFrameMove );
DXUTSetCursorSettings( true, true );
InitApp();
DXUTInit( true, true );
DXUTCreateWindow( L"CS391: Project 3" );
DXUTCreateDevice( D3D_FEATURE_LEVEL_10_0, true, 640, 480 );
}
//--------------------------------------------------------------------------------------
// Initialize everything and go into a render loop
//--------------------------------------------------------------------------------------
int WINAPI wWinMain( HINSTANCE hInstance, HINSTANCE hPrevInstance, LPWSTR lpCmdLine, int nCmdShow )
{
// Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
_CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif
// DXUT will create and use the best device (either D3D9 or D3D10)
// that is available on the system depending on which D3D callbacks are set below
// Set general DXUT callbacks
DXUTSetCallbackFrameMove( OnFrameMove );
DXUTSetCallbackKeyboard( OnKeyboard );
DXUTSetCallbackMouse( OnMouse );
DXUTSetCallbackMsgProc( MsgProc );
DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );
DXUTSetCallbackDeviceRemoved( OnDeviceRemoved );
// Set the D3D9 DXUT callbacks. Remove these sets if the app doesn't need to support D3D9
DXUTSetCallbackD3D9DeviceAcceptable( IsD3D9DeviceAcceptable );
DXUTSetCallbackD3D9DeviceCreated( OnD3D9CreateDevice );
DXUTSetCallbackD3D9DeviceReset( OnD3D9ResetDevice );
DXUTSetCallbackD3D9FrameRender( OnD3D9FrameRender );
DXUTSetCallbackD3D9DeviceLost( OnD3D9LostDevice );
DXUTSetCallbackD3D9DeviceDestroyed( OnD3D9DestroyDevice );
// Perform any application-level initialization here
// Setup Video
VideoSetup setup(1024,720);
setup.isWindowed = true;
// Rename Game Title
g_strGameTitle = L"MyGame";
DXUTInit( true, true, NULL ); // Parse the command line, show msgboxes on error, no extra command line params
DXUTSetCursorSettings( true, true ); // Show the cursor and clip it when in full screen
//HICON hIcon = (HICON)LoadImage(NULL, L"..\..\resources\WindowIcon.ico", IMAGE_ICON, 32, 32, LR_LOADFROMFILE);
DXUTCreateWindow(g_strGameTitle);
DXUTCreateDevice(setup.isWindowed, setup.height, setup.witdh);
DXUTMainLoop(); // Enter into the DXUT render loop
// Perform any application-level cleanup here
return DXUTGetExitCode();
}
//--------------------------------------------------------------------------------------
// Entry point to the program. Initializes everything and goes into a message processing
// loop. Idle time is used to render the scene.
//--------------------------------------------------------------------------------------
int WINAPI wWinMain( HINSTANCE hInstance, HINSTANCE hPrevInstance, LPWSTR lpCmdLine, int nCmdShow )
{
// Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
_CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF | _CRTDBG_CHECK_ALWAYS_DF );
#endif
// DXUT will create and use the best device (either D3D9 or D3D11)
// that is available on the system depending on which D3D callbacks are set below
// Set DXUT callbacks
DXUTSetCallbackMsgProc( MsgProc );
DXUTSetCallbackKeyboard( OnKeyboard );
DXUTSetCallbackMouse( OnMouse, true );
DXUTSetCallbackFrameMove( OnFrameMove );
DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );
DXUTSetCallbackD3D11DeviceAcceptable( IsD3D11DeviceAcceptable );
DXUTSetCallbackD3D11DeviceCreated( OnD3D11CreateDevice );
DXUTSetCallbackD3D11SwapChainResized( OnD3D11ResizedSwapChain );
DXUTSetCallbackD3D11SwapChainReleasing( OnD3D11ReleasingSwapChain );
DXUTSetCallbackD3D11DeviceDestroyed( OnD3D11DestroyDevice );
DXUTSetCallbackD3D11FrameRender( OnD3D11FrameRender );
InitApp();
DXUTInit( true, true, NULL ); // Parse the command line, show msgboxes on error, no extra command line params
DXUTSetCursorSettings( true, true );
WCHAR strWindowTitle[128] = L"TiledResources11";
#ifdef _DEBUG
wcscat_s( strWindowTitle, L" [DEBUG]" );
#endif
DXUTCreateWindow( strWindowTitle );
// set the update & render thread to the first hardware thread
SetThreadAffinityMask( GetCurrentThread(), 0x1 );
// Only require 10-level hardware, change to D3D_FEATURE_LEVEL_11_0 to require 11-class hardware
// Switch to D3D_FEATURE_LEVEL_9_x for 10level9 hardware
DXUTCreateDevice( D3D_FEATURE_LEVEL_10_0, true, 1280, 720 );
DXUTMainLoop(); // Enter into the DXUT render loop
return DXUTGetExitCode();
}
//--------------------------------------------------------------------------------------
// Initialize everything and go into a render loop
//--------------------------------------------------------------------------------------
int WINAPI wWinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPWSTR lpCmdLine, int nCmdShow)
{
HRESULT hr;
V_RETURN(DXUTSetMediaSearchPath(MEDIA_PATH));
// Enable run-time memory check for debug builds.
#if defined(DEBUG)
_CrtSetDbgFlag(_CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF);
#endif
// Set general DXUT callbacks
DXUTSetCallbackFrameMove(OnFrameMove);
DXUTSetCallbackKeyboard(OnKeyboard);
DXUTSetCallbackMouse(OnMouse);
DXUTSetCallbackMsgProc(MsgProc);
DXUTSetCallbackDeviceChanging(ModifyDeviceSettings);
DXUTSetCallbackDeviceRemoved(OnDeviceRemoved);
// Set the D3D11 DXUT callbacks
DXUTSetCallbackD3D11DeviceAcceptable (IsD3D11DeviceAcceptable);
DXUTSetCallbackD3D11DeviceCreated (OnD3D11CreateDevice);
DXUTSetCallbackD3D11SwapChainResized (OnD3D11ResizedSwapChain);
DXUTSetCallbackD3D11FrameRender (OnD3D11FrameRender);
DXUTSetCallbackD3D11SwapChainReleasing(OnD3D11ReleasingSwapChain);
DXUTSetCallbackD3D11DeviceDestroyed (OnD3D11DestroyDevice);
// Perform any application-level initialization here
InitAOParams(g_AOParams);
InitGUI();
UINT Width = 1920;
UINT Height = 1200;
DXUTInit(true, true, NULL); // Parse the command line, show msgboxes on error, no extra command line params
DXUTSetCursorSettings(true, true); // Show the cursor and clip it when in full screen
DXUTSetIsInGammaCorrectMode(false); // Do not use a SRGB back buffer for this sample
DXUTCreateWindow(L"Deinterleaved Texturing");
DXUTCreateDevice(D3D_FEATURE_LEVEL_11_0, true, Width, Height);
//DXUTToggleFullScreen();
DXUTMainLoop(); // Enter into the DXUT render loop
// Perform any application-level cleanup here
return DXUTGetExitCode();
}
void Init_DXUT( const wchar_t* const strWindowTitle, UINT iWidth, UINT iHeight )
{
// Set DXUT callbacks
DXUTSetCallbackD3D9DeviceAcceptable( IsDeviceAcceptable );
DXUTSetCallbackD3D9DeviceCreated( OnCreateDevice );
DXUTSetCallbackD3D9DeviceReset( OnResetDevice );
DXUTSetCallbackD3D9DeviceLost( OnLostDevice );
DXUTSetCallbackD3D9DeviceDestroyed( OnDestroyDevice );
DXUTSetCallbackMsgProc( MsgProc );
DXUTSetCallbackFrameMove( OnFrameMove );
DXUTSetCursorSettings( true, true );
DXUTInit( true, true ); // Parse the command line and show msgboxes
DXUTSetHotkeyHandling( false, true, true );
DXUTCreateWindow( strWindowTitle );
DXUTCreateDevice( true, iWidth, iHeight );
}
bool GameApp::InitInstance(HINSTANCE hInstance, LPWSTR lpCmdLine, HWND hWnd, int screenWidth, int screenHeight)
{
SetCursor( NULL );
m_hInstance = hInstance;
m_pOptions = GCC_NEW GameOptions("m_pOptions->ini");
ParseCommandLine(lpCmdLine);
m_pEventManager = GCC_NEW EventManager("CometConquest Event Mgr", true );
if (!m_pEventManager)
{
return false;
}
RegisterBaseGameEvents();
DXUTInit( true, true, NULL );
if(hWnd==NULL)
{
DXUTCreateWindow( VGetGameTitle(), hInstance, VGetIcon() );
}
else
{
DXUTSetWindow( hWnd, hWnd, hWnd);
}
if(!GetHwnd())
{
return false;
}
SetWindowText(GetHwnd(), VGetGameTitle());
DXUTCreateDevice (D3D_FEATURE_LEVEL_9_2, true, 800, 600 );
m_pGame = VCreateGameAndView();
if (!m_pGame)
return false;
m_bIsRunning = true;
return true;
}
RenderWin32DX9Imp::RenderWin32DX9Imp()
: bBackbufferLockable_( false )
, bufferFactory_( RenderBufferFactoryDX9Ptr( new RenderBufferFactoryDX9Null() ) )
, renderState_( RenderStatePtr( new RenderStateNull() ) )
{
eventListener_ = &nullEventListener_;
DXUTInit( false, false, NULL ); // Parse the command line, show msgboxes on error, no extra command line params
DXUTSetCursorSettings( true, true );
DXUTSetCallbackD3D9DeviceAcceptable( &RenderWin32DX9Imp::IsD3D9DeviceAcceptable, this );
DXUTSetCallbackDeviceChanging( &RenderWin32DX9Imp::ModifyDeviceSettings, this );
//DXUTSetCallbackMsgProc( ApplicationWin32Imp::MsgProc );
DXUTSetCallbackD3D9DeviceCreated( &RenderWin32DX9Imp::s_init, this );
DXUTSetCallbackD3D9DeviceReset( &RenderWin32DX9Imp::s_displayReset, this );
DXUTSetCallbackD3D9FrameRender( &RenderWin32DX9Imp::s_display, this );
DXUTSetCallbackD3D9DeviceLost( &RenderWin32DX9Imp::s_displayLost, this );
DXUTSetCallbackD3D9DeviceDestroyed( &RenderWin32DX9Imp::s_destroy, this );
}
//--------------------------------------------------------------------------------------
// Entry point to the program. Initializes everything and goes into a message processing
// loop. Idle time is used to render the scene.
//--------------------------------------------------------------------------------------
int WINAPI wWinMain( HINSTANCE hInstance, HINSTANCE hPrevInstance, LPWSTR lpCmdLine, int nCmdShow )
{
// Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
_CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif
// DXUT will create and use the best device (either D3D9 or D3D10)
// that is available on the system depending on which D3D callbacks are set below
//-------------------------------------------------------------------------
//Initialize test command window
//-------------------------------------------------------------------------
RedirectIOToConsole(L"output window");
// DXUT will create and use the best device (either D3D9 or D3D10)
// that is available on the system depending on which D3D callbacks are set below
// Set DXUT callbacks
DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );
DXUTSetCallbackMsgProc( MsgProc );
DXUTSetCallbackKeyboard( OnKeyboard );
DXUTSetCallbackFrameMove( OnFrameMove );
DXUTSetCallbackD3D10DeviceAcceptable( IsD3D10DeviceAcceptable );
DXUTSetCallbackD3D10DeviceCreated( OnD3D10CreateDevice );
DXUTSetCallbackD3D10SwapChainResized( OnD3D10SwapChainResized );
DXUTSetCallbackD3D10FrameRender( OnD3D10FrameRender );
DXUTSetCallbackD3D10SwapChainReleasing( OnD3D10SwapChainReleasing );
DXUTSetCallbackD3D10DeviceDestroyed( OnD3D10DestroyDevice );
HRESULT hr;
V_RETURN(DXUTSetMediaSearchPath(L"..\\Source\\SoftShadows"));
InitApp();
DXUTInit( true, true, NULL ); // Parse the command line, show msgboxes on error, no extra command line params
DXUTSetCursorSettings( true, true ); // Show the cursor and clip it when in full screen
DXUTCreateWindow( L"SoftShadows" );
DXUTCreateDevice( true, 1024, 768 );
DXUTMainLoop(); // Enter into the DXUT render loop
return DXUTGetExitCode();
}
HRESULT R3D3D::Init( bool isWindows, int width, int height )
{
DXUTSetCallbackD3D9DeviceAcceptable( IsDeviceAcceptable );
DXUTSetCallbackD3D9DeviceCreated( OnCreateDevice );
DXUTSetCallbackD3D9FrameRender( OnFrameRender );
DXUTSetCallbackD3D9DeviceReset( OnResetDevice );
DXUTSetCallbackD3D9DeviceLost( OnLostDevice );
DXUTSetCallbackD3D9DeviceDestroyed( OnDestroyDevice );
DXUTSetCallbackMsgProc( MsgProc );
DXUTSetCallbackFrameMove( OnFrameMove );
DXUTSetCallbackKeyboard( KeyboardProc );
DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );
DXUTInit( true, true ); // Parse the command line, handle the default hotkeys, and show msgboxes
DXUTSetCursorSettings( true, true ); // Show the cursor and clip it when in full screen
DXUTCreateWindow( L"EmptyProject" );
DXUTCreateDevice( isWindows, width, height );
// Start the render loop
DXUTMainLoop();
return DXUTGetExitCode();
}