//--------------------------------------------------------------------------------------
// Entry point to the program. Initializes everything and goes into a message processing
// loop. Idle time is used to render the scene.
//--------------------------------------------------------------------------------------
INT WINAPI wWinMain( HINSTANCE, HINSTANCE, LPWSTR, int )
{
// Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
_CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif
// DXUT will create and use the best device (either D3D9 or D3D10)
// that is available on the system depending on which D3D callbacks are set below
// Disable gamma correction on this sample
DXUTSetIsInGammaCorrectMode( false );
// Set DXUT callbacks
DXUTSetCallbackD3D10DeviceAcceptable( IsD3D10DeviceAcceptable );
DXUTSetCallbackD3D10DeviceCreated( OnD3D10CreateDevice );
DXUTSetCallbackD3D10SwapChainResized( OnD3D10ResizedSwapChain );
DXUTSetCallbackD3D10SwapChainReleasing( OnD3D10ReleasingSwapChain );
DXUTSetCallbackD3D10DeviceDestroyed( OnD3D10DestroyDevice );
DXUTSetCallbackD3D10FrameRender( OnD3D10FrameRender );
DXUTSetCallbackMsgProc( MsgProc );
DXUTSetCallbackKeyboard( OnKeyboard );
DXUTSetCallbackFrameMove( OnFrameMove );
DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );
InitApp();
DXUTInit( true, true, NULL ); // Parse the command line, show msgboxes on error, no extra command line params
DXUTSetCursorSettings( true, true ); // Show the cursor and clip it when in full screen
DXUTCreateWindow( L"AABB-Tree Hierarchies" );
DXUTCreateDevice( true, 640, 480 );
DXUTMainLoop(); // Enter into the DXUT render loop
return DXUTGetExitCode();
}
//--------------------------------------------------------------------------------------
// Entry point to the program. Initializes everything and goes into a message processing
// loop. Idle time is used to render the scene.
//--------------------------------------------------------------------------------------
int WINAPI wWinMain( HINSTANCE hInstance, HINSTANCE hPrevInstance,
LPWSTR lpCmdLine, int nCmdShow )
{
// Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
_CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif
// Disable gamma correction on this sample
DXUTSetIsInGammaCorrectMode( false );
DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );
DXUTSetCallbackMsgProc( MsgProc );
DXUTSetCallbackFrameMove( OnFrameMove );
DXUTSetCallbackMouse( MouseProc );
DXUTSetCallbackKeyboard( OnKeyboard );
DXUTSetCallbackD3D11DeviceAcceptable( IsD3D11DeviceAcceptable );
DXUTSetCallbackD3D11DeviceCreated( OnD3D11CreateDevice );
DXUTSetCallbackD3D11SwapChainResized( OnD3D11ResizedSwapChain );
DXUTSetCallbackD3D11FrameRender( OnD3D11FrameRender );
DXUTSetCallbackD3D11SwapChainReleasing( OnD3D11ReleasingSwapChain );
DXUTSetCallbackD3D11DeviceDestroyed( OnD3D11DestroyDevice );
InitApp();
DXUTInit( true, true );
DXUTSetCursorSettings( true, true );// Show the cursor and clip when in full screen
DXUTCreateWindow( L"Contact Hardening Shadows - Direct3D 11" );
DXUTCreateDevice( D3D_FEATURE_LEVEL_11_0, true, 800, 600 );
DXUTMainLoop(); // Enter into the DXUT render loop
return DXUTGetExitCode();
}
//--------------------------------------------------------------------------------------
// Entry point to the program. Initializes everything and goes into a message processing
// loop. Idle time is used to render the scene.
//--------------------------------------------------------------------------------------
int WINAPI wWinMain(HINSTANCE /*hInstance*/, HINSTANCE /*hPrevInstance*/, LPWSTR /*lpCmdLine*/, int /*nCmdShow*/)
{
// Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
_CrtSetDbgFlag(_CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF);
#endif
// Disable gamma correction on this sample
DXUTSetIsInGammaCorrectMode(false);
DXUTSetCallbackDeviceChanging(ModifyDeviceSettings);
DXUTSetCallbackMsgProc(MsgProc);
DXUTSetCallbackFrameMove(OnFrameMove);
DXUTSetCallbackD3D11DeviceAcceptable(IsD3D11DeviceAcceptable);
DXUTSetCallbackD3D11DeviceCreated(OnD3D11CreateDevice);
DXUTSetCallbackD3D11SwapChainResized(OnD3D11ResizedSwapChain);
DXUTSetCallbackD3D11FrameRender(OnD3D11FrameRender);
DXUTSetCallbackD3D11SwapChainReleasing(OnD3D11ReleasingSwapChain);
DXUTSetCallbackD3D11DeviceDestroyed(OnD3D11DestroyDevice);
InitApp();
// Force create a ref device so that feature level D3D_FEATURE_LEVEL_11_0 is guaranteed
DXUTInit(true, true, NULL); // Parse the command line, show msgboxes on error
DXUTSetCursorSettings(true, true); // Show the cursor and clip it when in full screen
DXUTCreateWindow(L"OIT11");
DXUTCreateDevice(D3D_FEATURE_LEVEL_11_0, true, g_nFrameWidth, g_nFrameHeight);
DXUTMainLoop(); // Enter into the DXUT render loop
return DXUTGetExitCode();
}
//--------------------------------------------------------------------------------------
// Initialize everything and go into a render loop
//--------------------------------------------------------------------------------------
int WINAPI wWinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPWSTR lpCmdLine, int nCmdShow)
{
HRESULT hr;
V_RETURN(DXUTSetMediaSearchPath(MEDIA_PATH));
// Enable run-time memory check for debug builds.
#if defined(DEBUG)
_CrtSetDbgFlag(_CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF);
#endif
// Set general DXUT callbacks
DXUTSetCallbackFrameMove(OnFrameMove);
DXUTSetCallbackKeyboard(OnKeyboard);
DXUTSetCallbackMouse(OnMouse);
DXUTSetCallbackMsgProc(MsgProc);
DXUTSetCallbackDeviceChanging(ModifyDeviceSettings);
DXUTSetCallbackDeviceRemoved(OnDeviceRemoved);
// Set the D3D11 DXUT callbacks
DXUTSetCallbackD3D11DeviceAcceptable (IsD3D11DeviceAcceptable);
DXUTSetCallbackD3D11DeviceCreated (OnD3D11CreateDevice);
DXUTSetCallbackD3D11SwapChainResized (OnD3D11ResizedSwapChain);
DXUTSetCallbackD3D11FrameRender (OnD3D11FrameRender);
DXUTSetCallbackD3D11SwapChainReleasing(OnD3D11ReleasingSwapChain);
DXUTSetCallbackD3D11DeviceDestroyed (OnD3D11DestroyDevice);
// Perform any application-level initialization here
InitAOParams(g_AOParams);
InitGUI();
UINT Width = 1920;
UINT Height = 1200;
DXUTInit(true, true, NULL); // Parse the command line, show msgboxes on error, no extra command line params
DXUTSetCursorSettings(true, true); // Show the cursor and clip it when in full screen
DXUTSetIsInGammaCorrectMode(false); // Do not use a SRGB back buffer for this sample
DXUTCreateWindow(L"Deinterleaved Texturing");
DXUTCreateDevice(D3D_FEATURE_LEVEL_11_0, true, Width, Height);
//DXUTToggleFullScreen();
DXUTMainLoop(); // Enter into the DXUT render loop
// Perform any application-level cleanup here
return DXUTGetExitCode();
}
void CDirect3DView::OnInitialUpdate()
{
__super::OnInitialUpdate();
if (DXUTGetD3D11Device() != NULL)
{
return;
}
DXUTSetIsInGammaCorrectMode(false);
// Set general DXUT callbacks
DXUTSetCallbackFrameMove( OnDXUTFrameMove, this );
DXUTSetCallbackKeyboard( OnDXUTKeyboard, this );
DXUTSetCallbackMouse( OnDXUTMouse, true, this );
DXUTSetCallbackMsgProc( DXUTMsgProc, this );
DXUTSetCallbackDeviceChanging( DXUTModifyDeviceSettings, this );
DXUTSetCallbackDeviceRemoved( OnDXUTDeviceRemoved, this );
// Set the D3D11 DXUT callbacks. Remove these sets if the app doesn't need to support D3D11
DXUTSetCallbackD3D11DeviceAcceptable( DXUTIsD3D11DeviceAcceptable, this );
DXUTSetCallbackD3D11DeviceCreated( OnDXUTD3D11CreateDevice, this );
DXUTSetCallbackD3D11SwapChainResized( OnDXUTD3D11ResizedSwapChain, this );
DXUTSetCallbackD3D11FrameRender( OnDXUTD3D11FrameRender, this );
DXUTSetCallbackD3D11SwapChainReleasing( OnDXUTD3D11ReleasingSwapChain, this );
DXUTSetCallbackD3D11DeviceDestroyed( OnDXUTD3D11DestroyDevice, this );
DXUTInit( true, true, NULL ); // Parse the command line, show msgboxes on error, no extra command line params
DXUTSetCursorSettings( true, true ); // Show the cursor and clip it when in full screen
// Create DXUT stuff
DXUTSetWindow( this->GetSafeHwnd(), this->GetSafeHwnd(), this->GetSafeHwnd(), false );
CRect rect;
GetClientRect(&rect);
// Only require 10-level hardware
DXUTCreateDevice( D3D_FEATURE_LEVEL_10_1, true, rect.right, rect.bottom );
}
int WINAPI wWinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPWSTR lpCmdLine, INT nCmdShow)
{
// Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
_CrtSetDbgFlag(_CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF);
#endif
#pragma region Callback Calls
DXUTSetCallbackDeviceChanging(ModifyDeviceSettings);
DXUTSetCallbackMsgProc(MsgProc);
DXUTSetCallbackKeyboard(OnKeyboard);
DXUTSetCallbackFrameMove(OnFrameMove);
DXUTSetCallbackD3D11DeviceCreated(OnD3D11CreateDevice);
DXUTSetCallbackD3D11SwapChainResized(OnD3D11ResizedSwapChain);
DXUTSetCallbackD3D11FrameRender(OnD3D11FrameRender);
DXUTSetCallbackD3D11SwapChainReleasing(OnD3D11ReleasingSwapChain);
DXUTSetCallbackD3D11DeviceDestroyed(OnD3D11DestroyDevice);
#pragma endregion
DXUTSetIsInGammaCorrectMode(true);
DXUTInit(true, true, 0);
InitUI();
#pragma region Adjust Display and Handling Settings
DXUTSetCursorSettings(true, true);
DXUTSetHotkeyHandling(true, true, false);
DXUTCreateWindow(L"Deferred Shading");
DXUTCreateDevice(D3D_FEATURE_LEVEL_11_0, true, 1280, 720);
#pragma endregion
DXUTMainLoop();
return DXUTGetExitCode();
}