/******************************************************************************
函数名称：Power_Down
功能描述：休眠手持机
参数名称： 输入/输出？ 类型 描述
输入
返 回 值：
作 者 ：于福勇/刘及华
日 期：2012-11-27
修改历史：
日期 修改人 修改描述
------ --------- -------------
******************************************************************************/
void System_reset(void)
{
// uint uisleep_delay; //可提升为全局变量
// EA_ucSetStopFlag(EM_ENABLE_STOP); //两秒后进入睡眠状态；
lcddisperr("系统正在重启...");
// uisleep_delay = 2;
Close_GPRS_Module();
// EA_vSetSaveResTime(uisleep_delay);
EA_vSystemManage (EM_RESET);
//(void)EA_uiInkey(0);
}
/******************************************************************************
函数名称：Power_Down
功能描述：休眠手持机
参数名称： 输入/输出？ 类型 描述
输入
返 回 值：
作 者 ：于福勇/刘及华
日 期：2012-11-27
修改历史：
日期 修改人 修改描述
------ --------- -------------
******************************************************************************/
void Power_Down(void)
{
// uint uisleep_delay; //可提升为全局变量
// EA_ucSetStopFlag(EM_ENABLE_STOP); //两秒后进入睡眠状态；
lcddisperr("系统正在关机...");
// uisleep_delay = 2;
Close_GPRS_Module();
// EA_vSetSaveResTime(uisleep_delay);
EA_vSystemManage (EM_SHUTDOWN);
// (void)EA_uiInkey(0);
}
uchar TA_BT_ucSetBTPINCodeMode(uchar ucMode)
{
uchar ucRet = 0, ucCmd = 0, ucData = 0;
if (0x00 == ucMode) // SPP 无需PIN配对
{
ucCmd = EM_BT_PARE_MODE;
ucData = EM_BT_PARE_SSP_JUST;
}
else
{
ucCmd = EM_BT_PARE_MODE;
ucData = EM_BT_PARE_FIXED;
}
ucRet = EA_ucSetBTParamConfig(ucCmd, &ucData);
if (EM_SUCCESS != ucRet)
{
ucCmd = 20;
EA_vCls();
TA_vDisplayLine(DISP_LINE_M1, DISP_POS_MID, "设置蓝牙配对模式错%02X", ucRet);
while (ucCmd--)
{
EA_vLCDLightOff();
EA_vDelayMs(500);
EA_vLCDLightOn();
EA_vDelayMs(500);
EA_vBeepMs(500);
TA_vDisplayLine(DISP_LINE_M2, DISP_POS_MID, "请联系厂商客服!");
EA_uiInkey(3);
}
EA_uiInkey(30);
EA_vSystemManage(EM_SHUTDOWN);
}
return ucRet;
}
int dlm_main(char *CMDBUF , int *nCmdLen)
{
char szGetBuffer[30],szTmpBuf[30];
char szBuffer[100];
// char cWaitRet;
uint uiKey , uiRet,nRet;
// uchar ucRetVal;
// uchar ucFd;
uchar ucRet;
int nScreen = 0;
char cMenuTime;
// uint uiCount;
uint uiOption;
uint puiConfigInfo;
// uchar i, ucIfExist, ucStatus;
const char *pcModuleName = MODULE_FILE_NAME;
// const char *pcCommModuleName = "applib";
DevHandle phPinpad;
// DevHandle hVoiceHandle;
#ifdef EPT_A9L
// uint_64 llCnt = 0;
// char szData[100];
#endif
#ifdef EMVIC
EA_EMV_vInit();
#endif
//设备句柄清空
gbPrintHandle = EM_NULL;
//清空所有全局设备句柄，add by zhuchentao 060831
gbhdlMagCard = EM_NULL;; //磁卡模块
gbhdlUserCard = EM_NULL;
gbhdlMasterCard = EM_NULL;
gbhdlSAM1Card = EM_NULL;
gbhdlSAM2Card = EM_NULL;
gbhdlSAM3Card = EM_NULL;
gbhdlSAM4Card = EM_NULL;
gbMifCardHandle = EM_NULL;
#ifdef EMVIC
gbhdlPINPAD = EM_NULL;
gbhdlRS232 = EM_NULL;
gbMifCardHandle = EM_NULL;
#endif
cRunState = 1;
CommInfo.gbHdl = EM_NULL;
memset(&iso, 0, sizeof(ISODataStru));
memset(&iso1, 0, sizeof(ISODataStru));
memset(&printiso, 0, sizeof(ISODataStru));
memset(&upiso, 0, sizeof(ISODataStru));
gbcECDefault = 0;
#ifndef EPT_A9L
#ifdef EPT_M3
if (EA_uiLoadAndExecuteModule("LibRFReader.dlm", "") != EM_SUCCESS)
#endif
#ifdef EPT56X0
if (EA_uiLoadAndExecuteModule("LibRFReader", "") != EM_SUCCESS)
#endif
{
PubDisplay(3, "载入LibRFReader.dlm失败");
PubDisplay(4, "请下载LibRFReader.dlm文件");
PubuiInkey(0);
return EXCEPTION;
}
#endif
EA_vCls();
PubucLoadAllMfVar((char*)MODULE_FILE_NAME, &FV, sizeof(FV));
// #ifdef EPT56X0
// EA_ucSetStopFlag(EM_DISABLE_STOP);
// #endif
// #ifdef EPT_A9L
// EA_ucSetStopFlag(EM_DISABLE_STOP);
// #endif
// 银商允许修改参数标志，提交程序的时候分别2种情况编译提交
// setup.c 中还有一个地方要设置，勿忘！！！
#ifdef TMS
cSetupModifyFlag = 0;// TMS服务器版 不允许修改参数
#else
cSetupModifyFlag = 1;// 下载版 允许修改参数
#endif
#ifndef EPT5610
EA_vSetLCDLightTimer(60);
#endif
EA_vCls();
if (PubucFirstRunPara(pcModuleName, "parafile") == EM_SUCCESS)
{
PubGetPinpadPara();// 先读取参数文件中密码键盘标签
FV.gbnParaFirstFlag = YES;
WRITE_nVAR(FV.gbnParaFirstFlag);
}
PubUsePinpadInside(FV.Other.SetPinpadType);
// PubUsePinpadInside(1);
PubGetPrinterType(&iPrinterType);
PubGetPinpadType(&iPinpadType);
while ((ucRet = PubOpenDevice("PINPAD", EM_io_IPP, &phPinpad)) != EM_SUCCESS)
{
PubGetPosType();
if (FV.gbnPosTypeFlag == YES)
{
FV.Other.SetPinpadType = 1;
PubUsePinpadInside(1);
WRITE_nVAR(FV.Other.SetPinpadType);
}
else
{
PubDisplayInv(2, "打开密码键盘错");
PubDisplay(3, "请接入密码键盘");
PubDisplay(4, "[%d][%02x][%d]", ucRet, ucRet,FV.gbnPosTypeFlag);
EA_vBeepMs(50);
uiRet = PubuiInkey(1);
if (uiRet == EM_key_FUNC1)
{
PubSetUsePinpadType();
}
if (uiRet == EM_key_FUNC9||EM_key_CANCEL)
{
return EM_ERROR;
}
}
}
while ((PubGetPinpadVer(phPinpad ,&iPinpadVer)) == 3)
{
PubDisplayInv(2, "请接好密码键盘");
EA_vBeepMs(50);
PubuiInkey(1);
}
#ifndef EPT5610
//20070914 by wei 将安全级别设置成默认级别
if ( iPinpadVer == 2 )
{
EA_pci_ucGetSecureConfig(phPinpad, EM_NULL, &puiConfigInfo);
if ( puiConfigInfo != EM_pin_DEFAULTCONFIG)
{
EA_pci_ucSetSecureConfig(phPinpad, EM_NULL, EM_pin_DEFAULTCONFIG);
}
}
#endif
EA_ucCloseDevice(&phPinpad);
nFirstSetupFlag = NO;
if (PubucFirstRunProg(pcModuleName) == EM_SUCCESS)
{
FV.gbnFirstFlag = YES;
WRITE_nVAR(FV.gbnFirstFlag);
}
// 注册headcommon
/*
if (PubLoadAndExecuteModule(pcCommModuleName, "F0506") != EM_SUCCESS)
{
EA_vCls();
PubDisplay(3, "装载公共模块失败!");
//因为PubDisplay是在applib中的，注册applib失败也就无法使用PubDisplay函数，只能用EA_vDisplay函数
PubuiInkey(0);
return EXCEPTION;
}
*/
// 导入def8583.h中的8583包定义
if (PubImport8583(YlIso8583Def) == EXCEPTION)
{
EA_vCls();
PubDisplay(3, "8583包导入出错");
PubDisplay(4, "请检查程序重新下装");
PubuiInkey(0);
return EXCEPTION;
}
// 导入结束
PubGetMifsType(&iMifsType); //增加POS模块判断/必须放在initcomm之前，initcomm可能会影响底层的判断
if (FV.gbnFirstFlag == YES)
{
PubGetPosType();
PubSetupFirst();
#ifdef EMVIC
setup_first ();
#endif
WRITE_nVAR(FV); //这里把setupfirst里面的内容统一写入一次
nFirstSetupFlag = YES;
FV.gbnFirstFlag = NO;
WRITE_nVAR(FV.gbnFirstFlag);
FV.gbnParaFirstFlag = YES;
WRITE_nVAR(FV.gbnParaFirstFlag);
if (FV.gbnParaFirstFlag == YES)
{
PubReadPara() ;
}
FV.gbnParaFirstFlag = NO;
WRITE_nVAR(FV.gbnParaFirstFlag);
}
if (FV.gbnParaFirstFlag == YES)
{
PubReadPara();
}
if (nFirstSetupFlag == YES)
{
PubInitGlobal();
PubSetup(10);
nFirstSetupFlag = NO;
}
else
{
PubInitGlobal();
}
#ifdef TMS
//读取主控应用参数
ProReadBasePara();
#endif
// by wei 每次进入应用不需要重新操作员签到 modify by baijz 20110723 BCTC要求每次开机操作员签到
BUFCLR(szGetBuffer);
// VERIFY_NORMAL(PubGetPoscfgcPosState(szGetBuffer));
// if (szGetBuffer[0] == LOGON)
// PubSetPoscfgcPosState(NO_LOGON);
EA_vCls();
PubKeyOn();
#ifdef BZ /*标准版*/
PubDisplayInv( 1, "中国银联");
#endif
#ifdef Largevalue /*大额支付*/
PubDisplayInv( 1, "中国银联-大额");
#endif
#ifdef NMLS /*内蒙移动零售*/
PubDisplayInv( 1, "内蒙移动零售");
#endif
#ifdef NMJF /*内蒙移动缴费*/
PubDisplayInv( 1, "内蒙移动缴费");
#endif
PubDisplayCen(2, "CUP2.0");
PubDisplayCen(3, "自检...");
szGetCmdFlag = 0 ;
szCMDChangeAppFlag = 0 ;
//ucRet = EA_ucOpenDevice("PINPAD",EM_io_IPP, &phPinpad);
while ((ucRet = PubOpenDevice("PINPAD", EM_io_IPP, &phPinpad)) != EM_SUCCESS)
{
PubDisplayInv(2, "打开密码键盘错");
PubDisplay(3, "[%d][%02x]", ucRet, ucRet);
EA_vBeepMs(50);
PubuiInkey(1);
}
while ((ucRet = PubResetPinpad(phPinpad)) != EM_SUCCESS)
{
PubDisplayInv(2, "请接好密码键盘");
PubDisplay(3, "[%d][%02x]", ucRet, ucRet);
EA_vBeepMs(50);
PubuiInkey(1);
}
// 为多应用，怕其他应用使用和银联相同的mackey workkey的ID号，这里重新load一次。
PubucSelectKey(phPinpad, EM_pin_MASTERKEY, FV.bank.nMKeyIndex);
if(FV.Other.gbMacKeyLen)
PubucLoadKey(phPinpad,EM_pin_DEFAULTMODE ,EM_pin_MACKEY, 0, FV.Other.gbMacKeyLen, FV.Other.gbszMacKey);
if(FV.Other.gbWorkKeyLen)
PubucLoadKey(phPinpad, EM_pin_DEFAULTMODE ,EM_pin_WORKKEY, 0, FV.Other.gbWorkKeyLen, FV.Other.gbszWorkKey);
EA_ucCloseDevice(&phPinpad);
if (PubuiInkeyMs(500) == EM_key_CANCEL)
PubLogin();
PubGetMifsType(&iMifsType); //增加POS模块判断/必须放在initcomm之前，initcomm可能会影响底层的判断
PubInitComm(&CommInfo, AUTOCHECK);
BUFCLR(szGetBuffer);
VERIFY_NORMAL(PubGetPoscfgcBatchState(szGetBuffer));
if (szGetBuffer[0] == YES)
{
EA_vCls();
PubDisplayInv(2, "请先结算再作交易");
PubuiInkey(1);
}
//打开MISPOS的通讯接口
#ifdef EPT_A9L
ucRet = EA_ucOpenDevice(FV.Other.gbcMISPort,0, &gbhdCMDRS232);
if (ucRet != EM_SUCCESS)
{
ucRet = EA_ucOpenDevice("COM3",0, &gbhdCMDRS232);
if (ucRet == EM_SUCCESS)
{
memcpy(FV.Other.gbcMISPort,"COM3",4);
WRITE_nVAR(FV.Other.gbcMISPort);
}
}
if (ucRet != EM_SUCCESS)
{
EA_vCls();
PubDisplay(1,"请先设置COMPOS 端口");
EA_vBeepMs(1000);
PubuiInkey(0);
return ProFuncBankszComPos();
/*memcpy(FV.Other.gbcMISPort,"COM2",4);
WRITE_nVAR(FV.Other.gbcMISPort);
EA_vCls();
PubDisplay(1,"无法打开通信端口!");
PubDisplay(2,"请重启设备");
EA_vBeepMs(1000);
PubuiInkey(2);
return EXCEPTION;*/
}
else
{
ucRet = EA_ucInitRS232(gbhdCMDRS232,FV.gbRSInfo.ucBps,EM_232_NOPAR ,EM_232_8DBS);
//ucRet = EA_ucCloseDevice(&gbhdCMDRS232);
//gbhdCMDRS232 = EM_NULL;
}
#endif
if ( nCmdLen != NULL && CMDBUF != NULL)
{
CMDBUFLen = *nCmdLen;
if (CMDBUFLen >0 )
{
memset(szCMDBuffer , 0 , sizeof(szCMDBuffer));
memcpy(szCMDBuffer , CMDBUF , CMDBUFLen);
memset(&TlvSendValue,0,sizeof(struct TLVVALUE));
CMDProcess(szCMDBuffer, (char*)&TlvSendValue, &gbctlvflag);
szGetCmdFlag = 15;
}
}
BUFCLR(szGetBuffer);
BUFCLR(gbPosTags);
gbTags = 0;
gbnDisplayTime = 0;
#ifdef EMVIC
PubSetExeReader(1);
#endif
while (1)
{
PubDispIcon();//显示一下5650电池电量和信号
#ifdef TMS
if (ProJudgeBaseDlaVer() == EM_SUCCESS)
{
ProGetBaseDialFix();
ucRet = PubReturnUpdate() ;
if (ucRet != EM_ERROR)
{
PubDelAllBit(&iso);
close_all_dev();
return ucRet;
}
if (PubCheckRunState() == EM_SUCCESS)
{
PubDelAllBit(&iso);
close_all_dev();
return EM_ERROR;
}
}
#endif
memset(&gbTrkInfo, 0, sizeof(struct TrackInfo));
memset(&gbCardinfo, 0, sizeof(struct CardConfig));
// PubDisplay(4 , "%d %d %d %d",EM_VOC_LEVEL0,EM_VOC_LEVEL1,EM_VOC_LEVEL2,EM_VOC_LEVEL3);
// PubuiInkey(60);
// FV.Other.POSSTATFLAG = 6;//chenjs20060915 ls add for test TMS
// EA_ucAudioSetVolume(FV.Other.ucNewVolume);
// EA_ucAudioPlay("qing.wav");
// EA_ucAudioPlay("shuaka.wav");
#if 0
ucRet = EA_ucOpenDevice("EVOICE", 0, &hVoiceHandle); //打开外置语音设备
if(ucRet != EM_SUCCESS)
{
EA_vDisplays(2,1, "Test Open Err:%02x", ucRet);
EA_uiInkey(0);
return EM_ERROR;
}
else
{
EA_vDisplays(2,1, "Open OK");
EA_uiInkey(2);
}
ucRet = EA_ucIfVoiceExist(hVoiceHandle, &ucIfExist);
if(ucRet != EM_SUCCESS)
{
EA_vDisplays(2,1, "Test IfExist Err:%02x", ucRet);
EA_ucCloseDevice(&hVoiceHandle);
EA_uiInkey(0);
return EM_ERROR;
}
else
{
if(ucIfExist == 1) //If Exist
{
for(i = 0; i < 8; i++)
{
ucRet = EA_ucPlayVoice(hVoiceHandle, i);
if(ucRet != EM_SUCCESS)
{
EA_vDisplays(2,1, "Test play%d Err:%02x",i, ucRet);
EA_uiInkey(0);
}
else
{
EA_vDisplays(2,1, "Test play%d OK", i);
}
do
{
EA_ucGetPlayStatus(hVoiceHandle, &ucStatus);
}while(ucStatus == EM_VOICE_PLAYING);
}
}
else
{
EA_vDisplays(2,1, "No voice module exists");
EA_uiInkey(0);
}
EA_ucCloseDevice(&hVoiceHandle);
}
#endif
#if 0
switch (FV.Other.POSSTATFLAG)
{
case 0:
break;
case 1:
if (ProCheckPOSSTATFLAG()!= NORMAL)
{
break;
}
EA_vCls();
PubDisplay(1, "系统要求下载参数");
PubDisplay(2, "请按确认键继续");
PubuiInkey(0);
if ( PubDownPara() == NORMAL)
{
ACK(4,"00");
}
else
{
NAK_info(4,"XX","交易失败");
}
continue;
case 2:
if (ProCheckPOSSTATFLAG()!= NORMAL)
{
break;
}
EA_vCls();
PubDisplay(1, "系统要求上传状态");
PubDisplay(2, "请按确认键继续");
PubuiInkey(0);
if (PubUploadState() == NORMAL)
{
ACK(4,"00");
}
else
{
NAK_info(4,"XX","交易失败");
}
continue;
case 3:
if (ProCheckPOSSTATFLAG()!= NORMAL)
{
break;
}
EA_vCls();
PubDisplay(1, "系统要求重新签到");
PubDisplay(2, "请按确认键继续");
PubuiInkey(0);
if (PubBankLogin() == NORMAL)
{
ACK(4,"00");
}
else
{
NAK_info(4,"XX","交易失败");
}
continue;
#ifdef EMVIC
case 4:
if (ProCheckPOSSTATFLAG()!= NORMAL)
{
break;
}
EA_vCls();
PubDisplay(1, "系统要求公钥下载");
PubDisplay(2, "请按确认键继续");
PubuiInkey(0);
//if(PubYlConnect(&CommInfo)!=NORMAL)
// continue;
if (PubQueryPubilcKey () == 1)
{
PubDownPubilcKey ();
}
ACK(4, "00");
//PubDialOff (&CommInfo);
continue;
case 5:
if (ProCheckPOSSTATFLAG()!= NORMAL)
{
break;
}
EA_vCls();
PubDisplay(1, "系统要求更新参数");
PubDisplay(2, "请按确认键继续");
PubuiInkey(0);
if(PubYlConnect(&CommInfo)!=NORMAL)
continue;
//add by baijz 20110906 下载过程断电，需要删除EMV参数文件，否则会重复下载
EA_ucPFDel (FEmvPara);
EA_ucPFCreate (FEmvPara, (sizeof (struct EMVPARA)));
//add end
PubDownEmvPara ();
PubDialOff (&CommInfo);
continue;
#endif
#ifdef TMS
case 6:
if (ProCheckPOSSTATFLAG()!= NORMAL)
{
break;
}
EA_vCls();
PubDisplay(1, "要求下载TMS参数");
PubDisplay(2, "请按确认键继续");
PubuiInkey(60);
TmsDownPara();
continue;
#endif
case 7:
if (ProCheckPOSSTATFLAG()!= NORMAL)
{
break;
}
EA_vCls();
PubDisplay(1, "要求下载卡BIN黑名单");
PubDisplay(2, "请按确认键继续");
PubuiInkey(60);
PubDownCardBin();
continue;
//JP add
default:
break;
}
FV.Other.POSSTATFLAG = 0;//chenjs20070104 add防止不小心死循环
CheckPOSSTATFLAGTimes = 0;
WRITE_nVAR(FV.Other.POSSTATFLAG);
#endif
EA_ucGetDateTime(&datetime);
sprintf(szTmpBuf , "%04d%02d%02d", datetime.usYear, datetime.ucMonth, datetime.ucDay);
PubDialOff(&CommInfo);
// 判断打印是否完成
PubJudePrintFinish(1);
// 如果隔日了，就要求POS的操作员签到。
if(memcmp( szTmpBuf , FV.Other.gbLoginDate, 8 ))
PubSetPoscfgcPosState(NO_LOGON);
BUFCLR(szGetBuffer);
VERIFY_NORMAL(PubGetPoscfgcPosState(szGetBuffer));
/* if (szGetBuffer[0] == NO_LOGON)
{
#ifdef TMS
EA_vCls();
PubDisplayInv(1,"银联EMV应用");
PubDisplayCen(3,"按任意键签到");
PubDisplayCen(4,"按取消键切换应用");
uiRet = PubuiInkey(10);
if (uiRet == EM_key_FUNC9|| uiRet == EM_key_CANCEL)
{
EA_vCls();
PubDisplayCen(2, "应用切换");
PubuiInkeyMs(500);
PubDelAllBit(&iso);
close_all_dev();
EA_vCls();
return EM_ERROR;
}
#endif
if (PubLogin() != NORMAL)
continue;
}
*/
// 20060119
//for test dudj
/*
PubDisplay(3, "是否联机签到?");
if (PubuiInkey(2)!=EM_key_ENTER)
sprintf( FV.Other.gbLoginDate , "%s", szTmpBuf);
PubDisplay(3, "");
*/
// 测试的时候打开。发布的封掉
/*sprintf( FV.Other.gbLoginDate , "%s", szTmpBuf);
if(memcmp( szTmpBuf , FV.Other.gbLoginDate, 8 ))
{
if (PubBankLogin() != NORMAL)
{
PubSetPoscfgcPosState(NO_LOGON);
}
else
{
EA_ucGetDateTime(&datetime);
sprintf(szTmpBuf , "%04d%02d%02d", datetime.usYear, datetime.ucMonth, datetime.ucDay);
sprintf( FV.Other.gbLoginDate , "%s", szTmpBuf);
WRITE_nVAR(FV.Other.gbLoginDate);
}
continue;
}*/
BUFCLR(szGetBuffer);
VERIFY_NORMAL(PubGetPoscfgcPosState(szGetBuffer));
if (szGetBuffer[0] == LOCK)
{
PubLock();
continue;
}
PubGetPoscfgcMenuTime(&cMenuTime);
PubGetTermCapSet(); //add by chenjis 20130311
while (1)
{
if (szCMDChangeAppFlag == 2)//强制切换到应用2
{
PubDelAllBit(&iso);
close_all_dev();
return 2;
}
// PubSetExeReader(0);
gbcECDefault = 0;
PubDispIcon();
#ifdef TMS
if (ProJudgeBaseDlaVer() == EM_SUCCESS)
{
// for 主控应用更新，添加一个新返回值2
ucRet = PubReturnUpdate() ;
if (ucRet != EM_ERROR)
{
PubDelAllBit(&iso);
close_all_dev();
return ucRet;
}
if (PubCheckRunState() == EM_SUCCESS)
{
PubDelAllBit(&iso);
close_all_dev();
return EM_ERROR;
}
}
#endif
PubSetPoscfgcSettleEnd(1); /*设置结算未结束标志 */
EA_vCls();
nScreen = 0 ;
//chenjs20060725 add down
memset(&gbTrkInfo, 0, sizeof(struct TrackInfo));
memset(&gbCardinfo, 0, sizeof(struct CardConfig));
gbTrkInfo.cDoneFlag = 0;
PubSetBankcMacChk(MAC_ECB);
#ifdef EMVIC
//ecash by wei
gblTranAmt = 0l;
BUFCLR(gbszTermData);
gbszTermData[0] = FV.EmvStru.gbcMSD;//loyes
#endif
strcpy(gbszErrCode, "");
while (1)
{
gbnComposFlag =1;
gbnSettleFlag=0;
if (szCMDChangeAppFlag == 2)//强制切换到应用2
{
PubDelAllBit(&iso);
close_all_dev();
return 2;
}
PubSetPoscfgcSettleEnd(1); /*设置结算未结束标志 */
//EA_vCls();
nScreen = 0 ;
//chenjs20060725 add down
memset(&gbTrkInfo, 0, sizeof(struct TrackInfo));
memset(&gbCardinfo, 0, sizeof(struct CardConfig));
gbTrkInfo.cDoneFlag = 0;
if (CMDCONT.Type == CMD_NONE) // CMD_NONE表示无命令
{
nRet = GetCMD();
if (szCMDChangeAppFlag == 15)
{
PubDelAllBit(&iso);
close_all_dev();
EA_ucCloseDevice(&gbhdCMDRS232);
memcpy(CMDBUF , szCMDBuffer , CMDBUFLen);
CMDBUF[CMDBUFLen] = 0 ;
*nCmdLen = CMDBUFLen;
return 15;
}
if (nRet != NORMAL)
{
//PubDisdoter();
PubDispLogo();
if( EA_ucKBHit_ped() == EM_key_HIT )
{
uiKey = PubuiInkeyMs(500);
#ifdef BZ /*标准版*/
if (uiKey == ENTER)
#endif
#ifdef Largevalue /*大额支付*/
if (uiKey == ENTER)
#endif
#ifdef NMLS /*内蒙移动零售*/
if (uiKey == EM_key_F1) /*应内蒙银商要求F1进入查询菜单wujianyuan modify 20130712*/
#endif
#ifdef NMJF /*内蒙移动缴费*/
if (uiKey == EM_key_F1) /*应内蒙银商要求F1进入查询菜单wujianyuan modify 20130712*/
#endif
{
EA_vCls();
PubDisplay(2, "请输入安全密码:");
BUFCLR(szGetBuffer);
PubGetSAFEPWD(szGetBuffer, sizeof(szGetBuffer));
PubKeyOff();
BUFCLR(szBuffer);
if (PubGetNStr(3, BIGFONT, szBuffer, 6) == NORMAL &&
memcmp(szGetBuffer, szBuffer, 6) == 0)
{
PubKeyOn();
EA_ucCloseDevice(&gbhdCMDRS232);
gbhdCMDRS232 = EM_NULL;
PubSetupNew();
EA_vCls();
}
EA_vCls();
PubKeyOn();
}
if(uiKey==EM_key_9)
{
if (PubuiInkey(1) == '5')
if (PubuiInkey(1) == '9')
{
EA_vSystemManage(EM_RESET);//add by wujy 20111020 实现重启
}
}
if (uiKey == EM_key_FUNC9) //多应用切换
{
EA_ucCloseDevice(&gbhdCMDRS232);
gbhdCMDRS232 = EM_NULL;
PubDelAllBit(&iso);
close_all_dev();
EA_vCls();
return EM_SUCCESS;
}
if (uiKey == EM_key_FUNC)
{
gbnComposFlag =0;
memset(&TlvSendValue,0,sizeof(struct TLVVALUE));
PubGetBankszTerminal(TlvSendValue.szTerminal, 8);
PubGetBankszCust(TlvSendValue.szCust, 15);
BUFCLR(szGetBuffer);
VERIFY_NORMAL(PubGetPoscfgcPosState(szGetBuffer));
if (szGetBuffer[0] == NO_LOGON)
{
if(PubLogin()!=NORMAL)
{
EA_vCls();
continue;
}
}
BUFCLR(szGetBuffer);
VERIFY_NORMAL(PubGetPoscfgcLoginState(szGetBuffer));
if (szGetBuffer[0] == NO_LOGON)
{
VERIFY_NORMAL(PubSetPoscfgcPosState(NO_LOGON));
if(PubBankLogin()== NORMAL)
{
VERIFY_NORMAL(PubSetPoscfgcPosState(LOGON));
VERIFY_NORMAL(PubSetPoscfgcLoginState(LOGON));
EA_ucGetDateTime(&datetime);
BUFCLR(FV.Other.gbLoginDate);
sprintf(FV.Other.gbLoginDate , "%04d%02d%02d", datetime.usYear, datetime.ucMonth, datetime.ucDay);
WRITE_nVAR(FV.Other.gbLoginDate);
}
else
{
PubDialOff (&CommInfo);
EA_vCls();
continue;
}
}
EA_vCls();
PubDisplay (1, "1.消 费 2.撤 销");
PubDisplay (2, "3.退 货 4.预授权");
PubDisplay (3, "5.离 线 6.打 印");
PubDisplay (4, "7.管 理 8.其 它");
uiKey = PubuiInkey((char) cMenuTime);
if(uiKey>='1'&&uiKey<='8')
uiOption=uiKey-'0';
else
{
EA_vCls();
continue;
}
PubUpYLDataOld();
PubProcessOld(uiOption);
EA_vCls();
continue;
}
}
continue;
}
}
if (CMDCONT.Type != CMD_NONE)
{
break;
}
}
if (PubProcess(CMDCONT.Type) != CMD_INTERRUPT)
{
ClearCMD();
}
EA_vLCDLightOff();
}
return EM_SUCCESS;
}
}
