static int add_primitive_cone_exec(bContext *C, wmOperator *op)
{
Object *obedit;
Mesh *me;
BMEditMesh *em;
float loc[3], rot[3], mat[4][4], dia;
int enter_editmode;
int state, cap_end, cap_tri;
unsigned int layer;
cap_end = RNA_enum_get(op->ptr, "end_fill_type");
cap_tri = (cap_end == 2);
ED_object_add_generic_get_opts(C, op, loc, rot, &enter_editmode, &layer, NULL);
make_prim_init(C, "Cone", &dia, mat, &state, loc, rot, layer);
obedit = CTX_data_edit_object(C);
me = obedit->data;
em = me->edit_btmesh;
if (!EDBM_op_call_and_selectf(
em, op, "vertout",
"create_cone segments=%i diameter1=%f diameter2=%f cap_ends=%b cap_tris=%b depth=%f mat=%m4",
RNA_int_get(op->ptr, "vertices"), RNA_float_get(op->ptr, "radius1"),
RNA_float_get(op->ptr, "radius2"), cap_end, cap_tri, RNA_float_get(op->ptr, "depth"), mat))
{
return OPERATOR_CANCELLED;
}
make_prim_finish(C, &state, enter_editmode);
return OPERATOR_FINISHED;
}
static int add_primitive_monkey_exec(bContext *C, wmOperator *op)
{
Object *obedit;
BMEditMesh *em;
float loc[3], rot[3], mat[4][4], dia;
bool enter_editmode;
bool is_view_aligned;
unsigned int layer;
bool was_editmode;
ED_object_add_generic_get_opts(C, op, loc, rot, &enter_editmode, &layer, &is_view_aligned);
if (!is_view_aligned)
rot[0] += (float)M_PI / 2.0f;
obedit = make_prim_init(C, CTX_DATA_(BLF_I18NCONTEXT_ID_MESH, "Suzanne"), &dia, mat, &was_editmode, loc, rot, layer);
dia = RNA_float_get(op->ptr, "radius");
mat[0][0] *= dia;
mat[1][1] *= dia;
mat[2][2] *= dia;
em = BKE_editmesh_from_object(obedit);
if (!EDBM_op_call_and_selectf(
em, op, "verts.out", false,
"create_monkey matrix=%m4", mat))
{
return OPERATOR_CANCELLED;
}
make_prim_finish(C, obedit, was_editmode, enter_editmode);
return OPERATOR_FINISHED;
}
static int add_primitive_cube_exec(bContext *C, wmOperator *op)
{
Object *obedit;
Mesh *me;
BMEditMesh *em;
float loc[3], rot[3], mat[4][4], dia;
int enter_editmode;
int state;
unsigned int layer;
ED_object_add_generic_get_opts(C, op, loc, rot, &enter_editmode, &layer, NULL);
make_prim_init(C, "Cube", &dia, mat, &state, loc, rot, layer);
obedit = CTX_data_edit_object(C);
me = obedit->data;
em = me->edit_btmesh;
if (!EDBM_op_call_and_selectf(em, op, "vertout", "create_cube mat=%m4 size=%f", mat, dia * 2.0f)) {
return OPERATOR_CANCELLED;
}
/* BMESH_TODO make plane side this: M_SQRT2 - plane (diameter of 1.41 makes it unit size) */
make_prim_finish(C, &state, enter_editmode);
return OPERATOR_FINISHED;
}
static int add_primitive_icosphere_exec(bContext *C, wmOperator *op)
{
Object *obedit;
BMEditMesh *em;
float loc[3], rot[3], mat[4][4], dia;
bool enter_editmode;
bool was_editmode;
unsigned int layer;
ED_object_add_generic_get_opts(C, op, loc, rot, &enter_editmode, &layer, NULL);
obedit = make_prim_init(C, CTX_DATA_(BLF_I18NCONTEXT_ID_MESH, "Icosphere"), &dia, mat, &was_editmode, loc, rot, layer);
em = BKE_editmesh_from_object(obedit);
if (!EDBM_op_call_and_selectf(
em, op, "verts.out", false,
"create_icosphere subdivisions=%i diameter=%f matrix=%m4",
RNA_int_get(op->ptr, "subdivisions"),
RNA_float_get(op->ptr, "size"), mat))
{
return OPERATOR_CANCELLED;
}
make_prim_finish(C, obedit, was_editmode, enter_editmode);
return OPERATOR_FINISHED;
}
static int add_primitive_icosphere_exec(bContext *C, wmOperator *op)
{
Object *obedit;
Mesh *me;
BMEditMesh *em;
float loc[3], rot[3], mat[4][4], dia;
int enter_editmode;
int state;
unsigned int layer;
ED_object_add_generic_get_opts(C, op, loc, rot, &enter_editmode, &layer, NULL);
make_prim_init(C, "Icosphere", &dia, mat, &state, loc, rot, layer);
obedit = CTX_data_edit_object(C);
me = obedit->data;
em = me->edit_btmesh;
if (!EDBM_op_call_and_selectf(
em, op, "vertout",
"create_icosphere subdivisions=%i diameter=%f mat=%m4",
RNA_int_get(op->ptr, "subdivisions"),
RNA_float_get(op->ptr, "size"), mat))
{
return OPERATOR_CANCELLED;
}
make_prim_finish(C, &state, enter_editmode);
return OPERATOR_FINISHED;
}
static int group_instance_add_exec(bContext *C, wmOperator *op)
{
Group *group= BLI_findlink(&CTX_data_main(C)->group, RNA_enum_get(op->ptr, "group"));
int enter_editmode;
unsigned int layer;
float loc[3], rot[3];
object_add_generic_invoke_options(C, op);
if(!ED_object_add_generic_get_opts(C, op, loc, rot, &enter_editmode, &layer))
return OPERATOR_CANCELLED;
if(group) {
Main *bmain= CTX_data_main(C);
Scene *scene= CTX_data_scene(C);
Object *ob= ED_object_add_type(C, OB_EMPTY, loc, rot, FALSE, layer);
rename_id(&ob->id, group->id.name+2);
ob->dup_group= group;
ob->transflag |= OB_DUPLIGROUP;
id_lib_extern(&group->id);
/* works without this except if you try render right after, see: 22027 */
DAG_scene_sort(bmain, scene);
WM_event_add_notifier(C, NC_SCENE|ND_OB_ACTIVE, CTX_data_scene(C));
return OPERATOR_FINISHED;
}
return OPERATOR_CANCELLED;
}
static int add_primitive_cube_exec(bContext *C, wmOperator *op)
{
Object *obedit;
BMEditMesh *em;
float loc[3], rot[3], mat[4][4], dia;
bool enter_editmode;
bool was_editmode;
unsigned int layer;
ED_object_add_generic_get_opts(C, op, loc, rot, &enter_editmode, &layer, NULL);
obedit = make_prim_init(C, CTX_DATA_(BLF_I18NCONTEXT_ID_MESH, "Cube"), &dia, mat, &was_editmode, loc, rot, layer);
em = BKE_editmesh_from_object(obedit);
if (!EDBM_op_call_and_selectf(
em, op, "verts.out", false,
"create_cube matrix=%m4 size=%f",
mat, RNA_float_get(op->ptr, "radius") * 2.0f))
{
return OPERATOR_CANCELLED;
}
/* BMESH_TODO make plane side this: M_SQRT2 - plane (diameter of 1.41 makes it unit size) */
make_prim_finish(C, obedit, was_editmode, enter_editmode);
return OPERATOR_FINISHED;
}
static int add_primitive_cone_exec(bContext *C, wmOperator *op)
{
Object *obedit;
BMEditMesh *em;
float loc[3], rot[3], mat[4][4], dia;
bool enter_editmode;
unsigned int layer;
bool was_editmode;
const int end_fill_type = RNA_enum_get(op->ptr, "end_fill_type");
const bool cap_end = (end_fill_type != 0);
const bool cap_tri = (end_fill_type == 2);
ED_object_add_generic_get_opts(C, op, loc, rot, &enter_editmode, &layer, NULL);
obedit = make_prim_init(C, CTX_DATA_(BLF_I18NCONTEXT_ID_MESH, "Cone"), &dia, mat, &was_editmode, loc, rot, layer);
em = BKE_editmesh_from_object(obedit);
if (!EDBM_op_call_and_selectf(
em, op, "verts.out", false,
"create_cone segments=%i diameter1=%f diameter2=%f cap_ends=%b cap_tris=%b depth=%f matrix=%m4",
RNA_int_get(op->ptr, "vertices"), RNA_float_get(op->ptr, "radius1"),
RNA_float_get(op->ptr, "radius2"), cap_end, cap_tri, RNA_float_get(op->ptr, "depth"), mat))
{
return OPERATOR_CANCELLED;
}
make_prim_finish(C, obedit, was_editmode, enter_editmode);
return OPERATOR_FINISHED;
}
/* ***************** add primitives *************** */
static int object_metaball_add_exec(bContext *C, wmOperator *op)
{
Object *obedit= CTX_data_edit_object(C);
/*MetaElem *elem;*/ /*UNUSED*/
int newob= 0;
int enter_editmode;
unsigned int layer;
float loc[3], rot[3];
float mat[4][4];
object_add_generic_invoke_options(C, op); // XXX these props don't get set right when only exec() is called
if(!ED_object_add_generic_get_opts(C, op, loc, rot, &enter_editmode, &layer))
return OPERATOR_CANCELLED;
if(obedit==NULL || obedit->type!=OB_MBALL) {
obedit= ED_object_add_type(C, OB_MBALL, loc, rot, TRUE, layer);
newob = 1;
}
else DAG_id_tag_update(&obedit->id, OB_RECALC_DATA);
ED_object_new_primitive_matrix(C, obedit, loc, rot, mat);
/* elem= (MetaElem *) */ add_metaball_primitive(C, mat, RNA_enum_get(op->ptr, "type"), newob);
/* userdef */
if (newob && !enter_editmode) {
ED_object_exit_editmode(C, EM_FREEDATA);
}
WM_event_add_notifier(C, NC_OBJECT|ND_DRAW, obedit);
return OPERATOR_FINISHED;
}
static int object_camera_add_exec(bContext *C, wmOperator *op)
{
View3D *v3d = CTX_wm_view3d(C);
Scene *scene= CTX_data_scene(C);
Object *ob;
int enter_editmode;
unsigned int layer;
float loc[3], rot[3];
/* force view align for cameras */
RNA_boolean_set(op->ptr, "view_align", 1);
object_add_generic_invoke_options(C, op);
if(!ED_object_add_generic_get_opts(C, op, loc, rot, &enter_editmode, &layer))
return OPERATOR_CANCELLED;
ob= ED_object_add_type(C, OB_CAMERA, loc, rot, FALSE, layer);
if (v3d) {
if (v3d->camera == NULL)
v3d->camera = ob;
if (v3d->scenelock && scene->camera==NULL) {
scene->camera = ob;
}
}
return OPERATOR_FINISHED;
}
static int add_primitive_monkey_exec(bContext *C, wmOperator *op)
{
Object *obedit;
Mesh *me;
BMEditMesh *em;
float loc[3], rot[3], mat[4][4], dia;
int enter_editmode;
int state, view_aligned;
unsigned int layer;
ED_object_add_generic_get_opts(C, op, loc, rot, &enter_editmode, &layer, &view_aligned);
if (!view_aligned)
rot[0] += M_PI / 2.0f;
make_prim_init(C, "Monkey", &dia, mat, &state, loc, rot, layer);
obedit = CTX_data_edit_object(C);
me = obedit->data;
em = me->edit_btmesh;
if (!EDBM_op_call_and_selectf(em, op, "vertout", "create_monkey mat=%m4", mat)) {
return OPERATOR_CANCELLED;
}
make_prim_finish(C, &state, enter_editmode);
return OPERATOR_FINISHED;
}
/* for object add operator */
static int object_add_exec(bContext *C, wmOperator *op)
{
int enter_editmode;
unsigned int layer;
float loc[3], rot[3];
if(!ED_object_add_generic_get_opts(C, op, loc, rot, &enter_editmode, &layer))
return OPERATOR_CANCELLED;
ED_object_add_type(C, RNA_enum_get(op->ptr, "type"), loc, rot, enter_editmode, layer);
return OPERATOR_FINISHED;
}
static int add_primitive_monkey_exec(bContext *C, wmOperator *op)
{
int enter_editmode;
unsigned int layer;
float loc[3], rot[3];
if(!ED_object_add_generic_get_opts(C, op, loc, rot, &enter_editmode, &layer))
return OPERATOR_CANCELLED;
make_prim_ext(C, loc, rot, enter_editmode, layer,
PRIM_MONKEY, 0, 0, 2, 0.0f, 0.0f, 0, 0);
return OPERATOR_FINISHED;
}
static int add_primitive_cube_exec(bContext *C, wmOperator *op)
{
int enter_editmode;
unsigned int layer;
float loc[3], rot[3];
if(!ED_object_add_generic_get_opts(C, op, loc, rot, &enter_editmode, &layer))
return OPERATOR_CANCELLED;
/* sqrt(2.0f) - plane (diameter of 1.41 makes it unit size) */
make_prim_ext(C, loc, rot, enter_editmode, layer,
PRIM_CUBE, 4, 0, 0, sqrt(2.0f), 2.0f, 1, 1);
return OPERATOR_FINISHED;
}
static int add_primitive_icosphere_exec(bContext *C, wmOperator *op)
{
int enter_editmode;
unsigned int layer;
float loc[3], rot[3];
if(!ED_object_add_generic_get_opts(C, op, loc, rot, &enter_editmode, &layer))
return OPERATOR_CANCELLED;
make_prim_ext(C, loc, rot, enter_editmode, layer,
PRIM_ICOSPHERE, 0, 0, RNA_int_get(op->ptr, "subdivisions"),
RNA_float_get(op->ptr,"size"), 0.0f, 0, 0);
return OPERATOR_FINISHED;
}
static int add_primitive_cone_exec(bContext *C, wmOperator *op)
{
int enter_editmode;
unsigned int layer;
float loc[3], rot[3];
if(!ED_object_add_generic_get_opts(C, op, loc, rot, &enter_editmode, &layer))
return OPERATOR_CANCELLED;
make_prim_ext(C, loc, rot, enter_editmode, layer,
PRIM_CONE, RNA_int_get(op->ptr, "vertices"), 0, 0,
RNA_float_get(op->ptr,"radius"), RNA_float_get(op->ptr, "depth"),
0, RNA_boolean_get(op->ptr, "cap_end"));
return OPERATOR_FINISHED;
}
/* for effector add primitive operators */
static Object *effector_add_type(bContext *C, wmOperator *op, int type)
{
Object *ob;
int enter_editmode;
unsigned int layer;
float loc[3], rot[3];
float mat[4][4];
object_add_generic_invoke_options(C, op);
if(!ED_object_add_generic_get_opts(C, op, loc, rot, &enter_editmode, &layer))
return NULL;
if(type==PFIELD_GUIDE) {
ob= ED_object_add_type(C, OB_CURVE, loc, rot, FALSE, layer);
rename_id(&ob->id, "CurveGuide");
((Curve*)ob->data)->flag |= CU_PATH|CU_3D;
ED_object_enter_editmode(C, 0);
ED_object_new_primitive_matrix(C, ob, loc, rot, mat);
BLI_addtail(curve_get_editcurve(ob), add_nurbs_primitive(C, mat, CU_NURBS|CU_PRIM_PATH, 1));
if(!enter_editmode)
ED_object_exit_editmode(C, EM_FREEDATA);
}
else {
ob= ED_object_add_type(C, OB_EMPTY, loc, rot, FALSE, layer);
rename_id(&ob->id, "Field");
switch(type) {
case PFIELD_WIND:
case PFIELD_VORTEX:
ob->empty_drawtype = OB_SINGLE_ARROW;
break;
}
}
ob->pd= object_add_collision_fields(type);
DAG_scene_sort(CTX_data_main(C), CTX_data_scene(C));
return ob;
}
static int object_lamp_add_exec(bContext *C, wmOperator *op)
{
Object *ob;
int type= RNA_enum_get(op->ptr, "type");
int enter_editmode;
unsigned int layer;
float loc[3], rot[3];
object_add_generic_invoke_options(C, op);
if(!ED_object_add_generic_get_opts(C, op, loc, rot, &enter_editmode, &layer))
return OPERATOR_CANCELLED;
ob= ED_object_add_type(C, OB_LAMP, loc, rot, FALSE, layer);
((Lamp*)ob->data)->type= type;
rename_id((ID *)ob, get_lamp_defname(type));
rename_id((ID *)ob->data, get_lamp_defname(type));
return OPERATOR_FINISHED;
}
static int object_add_text_exec(bContext *C, wmOperator *op)
{
Object *obedit= CTX_data_edit_object(C);
int enter_editmode;
unsigned int layer;
float loc[3], rot[3];
object_add_generic_invoke_options(C, op); // XXX these props don't get set right when only exec() is called
if(!ED_object_add_generic_get_opts(C, op, loc, rot, &enter_editmode, &layer))
return OPERATOR_CANCELLED;
if(obedit && obedit->type==OB_FONT)
return OPERATOR_CANCELLED;
obedit= ED_object_add_type(C, OB_FONT, loc, rot, enter_editmode, layer);
WM_event_add_notifier(C, NC_OBJECT|ND_DRAW, obedit);
return OPERATOR_FINISHED;
}
static int object_armature_add_exec(bContext *C, wmOperator *op)
{
Object *obedit= CTX_data_edit_object(C);
View3D *v3d= CTX_wm_view3d(C);
RegionView3D *rv3d= CTX_wm_region_view3d(C);
int newob= 0;
int enter_editmode;
unsigned int layer;
float loc[3], rot[3];
object_add_generic_invoke_options(C, op); // XXX these props don't get set right when only exec() is called
if(!ED_object_add_generic_get_opts(C, op, loc, rot, &enter_editmode, &layer))
return OPERATOR_CANCELLED;
if ((obedit==NULL) || (obedit->type != OB_ARMATURE)) {
obedit= ED_object_add_type(C, OB_ARMATURE, loc, rot, TRUE, layer);
ED_object_enter_editmode(C, 0);
newob = 1;
}
else DAG_id_tag_update(&obedit->id, OB_RECALC_DATA);
if(obedit==NULL) {
BKE_report(op->reports, RPT_ERROR, "Cannot create editmode armature.");
return OPERATOR_CANCELLED;
}
/* v3d and rv3d are allowed to be NULL */
add_primitive_bone(CTX_data_scene(C), v3d, rv3d);
/* userdef */
if (newob && !enter_editmode)
ED_object_exit_editmode(C, EM_FREEDATA);
WM_event_add_notifier(C, NC_OBJECT|ND_DRAW, obedit);
return OPERATOR_FINISHED;
}
static int curvesurf_prim_add(bContext *C, wmOperator *op, int type, int isSurf)
{
Object *obedit = CTX_data_edit_object(C);
ListBase *editnurb;
Nurb *nu;
bool newob = false;
bool enter_editmode;
unsigned int layer;
float dia;
float loc[3], rot[3];
float mat[4][4];
WM_operator_view3d_unit_defaults(C, op);
if (!ED_object_add_generic_get_opts(C, op, 'Z', loc, rot, &enter_editmode, &layer, NULL))
return OPERATOR_CANCELLED;
if (!isSurf) { /* adding curve */
if (obedit == NULL || obedit->type != OB_CURVE) {
const char *name = get_curve_defname(type);
Curve *cu;
obedit = ED_object_add_type(C, OB_CURVE, name, loc, rot, true, layer);
newob = true;
cu = (Curve *)obedit->data;
cu->flag |= CU_DEFORM_FILL;
if (type & CU_PRIM_PATH)
cu->flag |= CU_PATH | CU_3D;
}
else {
DAG_id_tag_update(&obedit->id, OB_RECALC_DATA);
}
}
else { /* adding surface */
if (obedit == NULL || obedit->type != OB_SURF) {
const char *name = get_surf_defname(type);
obedit = ED_object_add_type(C, OB_SURF, name, loc, rot, true, layer);
newob = true;
}
else {
DAG_id_tag_update(&obedit->id, OB_RECALC_DATA);
}
}
ED_object_new_primitive_matrix(C, obedit, loc, rot, mat);
dia = RNA_float_get(op->ptr, "radius");
mul_mat3_m4_fl(mat, dia);
nu = ED_curve_add_nurbs_primitive(C, obedit, mat, type, newob);
editnurb = object_editcurve_get(obedit);
BLI_addtail(editnurb, nu);
/* userdef */
if (newob && !enter_editmode) {
ED_object_editmode_exit(C, EM_FREEDATA);
}
WM_event_add_notifier(C, NC_OBJECT | ND_DRAW, obedit);
return OPERATOR_FINISHED;
}
static int curvesurf_prim_add(bContext *C, wmOperator *op, int type, int isSurf)
{
Object *obedit = CTX_data_edit_object(C);
ListBase *editnurb;
Nurb *nu;
bool newob = false;
bool enter_editmode, is_view_aligned;
unsigned int layer;
float dia;
float loc[3], rot[3];
float mat[4][4];
WM_operator_view3d_unit_defaults(C, op);
if (!ED_object_add_generic_get_opts(C, op, loc, rot, &enter_editmode, &layer, &is_view_aligned))
return OPERATOR_CANCELLED;
if (!isSurf) { /* adding curve */
if (obedit == NULL || obedit->type != OB_CURVE) {
Curve *cu;
obedit = ED_object_add_type(C, OB_CURVE, loc, rot, true, layer);
newob = true;
cu = (Curve *)obedit->data;
cu->flag |= CU_DEFORM_FILL;
if (type & CU_PRIM_PATH)
cu->flag |= CU_PATH | CU_3D;
}
else {
DAG_id_tag_update(&obedit->id, OB_RECALC_DATA);
}
}
else { /* adding surface */
if (obedit == NULL || obedit->type != OB_SURF) {
obedit = ED_object_add_type(C, OB_SURF, loc, rot, true, layer);
newob = true;
}
else {
DAG_id_tag_update(&obedit->id, OB_RECALC_DATA);
}
}
/* rename here, the undo stack checks name for valid undo pushes */
if (newob) {
if (obedit->type == OB_CURVE) {
rename_id((ID *)obedit, get_curve_defname(type));
rename_id((ID *)obedit->data, get_curve_defname(type));
}
else {
rename_id((ID *)obedit, get_surf_defname(type));
rename_id((ID *)obedit->data, get_surf_defname(type));
}
}
/* ED_object_add_type doesnt do an undo, is needed for redo operator on primitive */
if (newob && enter_editmode)
ED_undo_push(C, "Enter Editmode");
ED_object_new_primitive_matrix(C, obedit, loc, rot, mat, false);
dia = RNA_float_get(op->ptr, "radius");
mat[0][0] *= dia;
mat[1][1] *= dia;
mat[2][2] *= dia;
nu = add_nurbs_primitive(C, obedit, mat, type, newob);
editnurb = object_editcurve_get(obedit);
BLI_addtail(editnurb, nu);
/* userdef */
if (newob && !enter_editmode) {
ED_object_editmode_exit(C, EM_FREEDATA);
}
WM_event_add_notifier(C, NC_OBJECT | ND_DRAW, obedit);
return OPERATOR_FINISHED;
}
