bool PLOT_CONTROLLER::OpenPlotfile( const wxString &aSuffix, PlotFormat aFormat, const wxString &aSheetDesc ) { LOCALE_IO toggle; /* Save the current format: sadly some plot routines depends on this but the main reason is that the StartPlot method uses it to dispatch the plotter creation */ GetPlotOptions().SetFormat( aFormat ); // Ensure that the previous plot is closed ClosePlot(); // Now compute the full filename for the output and start the plot // (after ensuring the output directory is OK) wxString outputDirName = GetPlotOptions().GetOutputDirectory() ; wxFileName outputDir = wxFileName::DirName( outputDirName ); wxString boardFilename = m_board->GetFileName(); if( EnsureFileDirectoryExists( &outputDir, boardFilename ) ) { wxFileName fn( boardFilename ); BuildPlotFileName( &fn, outputDirName, aSuffix, GetDefaultPlotExtension( aFormat ) ); m_plotter = StartPlotBoard( m_board, &GetPlotOptions(), ToLAYER_ID( GetLayer() ), fn.GetFullPath(), aSheetDesc ); } return( m_plotter != NULL ); }
wxFileName DIALOG_PLOT_SCHEMATIC::createPlotFileName( wxTextCtrl* aOutputDirectoryName, wxString& aPlotFileName, wxString& aExtension, REPORTER* aReporter ) { wxString outputDirName = aOutputDirectoryName->GetValue(); wxFileName outputDir = wxFileName::DirName( outputDirName ); wxString plotFileName = Prj().AbsolutePath( aPlotFileName + wxT(".") + aExtension); EnsureFileDirectoryExists( &outputDir, plotFileName, aReporter ); wxFileName fn( plotFileName ); fn.SetPath( outputDir.GetFullPath() ); return fn; }
bool PLOT_CONTROLLER::OpenPlotfile( const wxString &aSuffix, PlotFormat aFormat, const wxString &aSheetDesc ) { LOCALE_IO toggle; /* Save the current format: sadly some plot routines depends on this but the main reason is that the StartPlot method uses it to dispatch the plotter creation */ GetPlotOptions().SetFormat( aFormat ); // Ensure that the previous plot is closed ClosePlot(); // Now compute the full filename for the output and start the plot // (after ensuring the output directory is OK) wxString outputDirName = GetPlotOptions().GetOutputDirectory() ; wxFileName outputDir = wxFileName::DirName( outputDirName ); wxString boardFilename = m_board->GetFileName(); if( EnsureFileDirectoryExists( &outputDir, boardFilename ) ) { // outputDir contains now the full path of plot files m_plotFile = boardFilename; m_plotFile.SetPath( outputDir.GetPath() ); wxString fileExt = GetDefaultPlotExtension( aFormat ); // Gerber format can use specific file ext, depending on layers // (now not a good practice, because the official file ext is .gbr) if( GetPlotOptions().GetFormat() == PLOT_FORMAT_GERBER && GetPlotOptions().GetUseGerberProtelExtensions() ) fileExt = GetGerberProtelExtension( GetLayer() ); // Build plot filenames from the board name and layer names: BuildPlotFileName( &m_plotFile, outputDir.GetPath(), aSuffix, fileExt ); m_plotter = StartPlotBoard( m_board, &GetPlotOptions(), ToLAYER_ID( GetLayer() ), m_plotFile.GetFullPath(), aSheetDesc ); } return( m_plotter != NULL ); }
wxFileName DIALOG_PLOT_SCHEMATIC::createPlotFileName( wxTextCtrl* aOutputDirectoryName, wxString& aPlotFileName, wxString& aExtension, REPORTER* aReporter ) { wxString outputDirName = aOutputDirectoryName->GetValue(); wxFileName outputDir = wxFileName::DirName( outputDirName ); wxString plotFileName = Prj().AbsolutePath( aPlotFileName + wxT( "." ) + aExtension); if( !EnsureFileDirectoryExists( &outputDir, plotFileName, aReporter ) ) { wxString msg = wxString::Format( _( "Could not write plot files to folder \"%s\"." ), outputDir.GetPath() ); aReporter->Report( msg, REPORTER::RPT_ERROR ); } wxFileName fn( plotFileName ); fn.SetPath( outputDir.GetFullPath() ); return fn; }
void DIALOG_PLOT::Plot( wxCommandEvent& event ) { applyPlotSettings(); // If no layer selected, we have nothing plotted. // Prompt user if it happens because he could think there is a bug in Pcbnew. if( !m_plotOpts.GetLayerSelection().any() ) { DisplayError( this, _( "No layer selected, Nothing to plot" ) ); return; } // Create output directory if it does not exist (also transform it in // absolute form). Bail if it fails wxFileName outputDir = wxFileName::DirName( m_plotOpts.GetOutputDirectory() ); wxString boardFilename = m_parent->GetBoard()->GetFileName(); REPORTER& reporter = m_messagesPanel->Reporter(); if( !EnsureFileDirectoryExists( &outputDir, boardFilename, &reporter ) ) { wxString msg; msg.Printf( _( "Could not write plot files to folder \"%s\"." ), GetChars( outputDir.GetPath() ) ); DisplayError( this, msg ); return; } m_plotOpts.SetAutoScale( false ); m_plotOpts.SetScale( 1 ); switch( m_plotOpts.GetScaleSelection() ) { default: break; case 0: // Autoscale option m_plotOpts.SetAutoScale( true ); break; case 2: // 3:2 option m_plotOpts.SetScale( 1.5 ); break; case 3: // 2:1 option m_plotOpts.SetScale( 2 ); break; case 4: // 3:1 option m_plotOpts.SetScale( 3 ); break; } /* If the scale factor edit controls are disabled or the scale value * is 0, don't adjust the base scale factor. This fixes a bug when * the default scale adjust is initialized to 0 and saved in program * settings resulting in a divide by zero fault. */ if( m_fineAdjustXscaleOpt->IsEnabled() && m_XScaleAdjust != 0.0 ) m_plotOpts.SetFineScaleAdjustX( m_XScaleAdjust ); if( m_fineAdjustYscaleOpt->IsEnabled() && m_YScaleAdjust != 0.0 ) m_plotOpts.SetFineScaleAdjustY( m_YScaleAdjust ); if( m_PSFineAdjustWidthOpt->IsEnabled() ) m_plotOpts.SetWidthAdjust( m_PSWidthAdjust ); wxString file_ext( GetDefaultPlotExtension( m_plotOpts.GetFormat() ) ); // Test for a reasonable scale value // XXX could this actually happen? isn't it constrained in the apply // function? if( m_plotOpts.GetScale() < PLOT_MIN_SCALE ) DisplayInfoMessage( this, _( "Warning: Scale option set to a very small value" ) ); if( m_plotOpts.GetScale() > PLOT_MAX_SCALE ) DisplayInfoMessage( this, _( "Warning: Scale option set to a very large value" ) ); GERBER_JOBFILE_WRITER jobfile_writer( m_board, &reporter ); // Save the current plot options in the board m_parent->SetPlotSettings( m_plotOpts ); wxBusyCursor dummy; for( LSEQ seq = m_plotOpts.GetLayerSelection().UIOrder(); seq; ++seq ) { PCB_LAYER_ID layer = *seq; // All copper layers that are disabled are actually selected // This is due to wonkyness in automatically selecting copper layers // for plotting when adding more than two layers to a board. // If plot options become accessible to the layers setup dialog // please move this functionality there! // This skips a copper layer if it is actually disabled on the board. if( ( LSET::AllCuMask() & ~m_board->GetEnabledLayers() )[layer] ) continue; // Pick the basename from the board file wxFileName fn( boardFilename ); // Use Gerber Extensions based on layer number // (See http://en.wikipedia.org/wiki/Gerber_File) if( m_plotOpts.GetFormat() == PLOT_FORMAT_GERBER && m_useGerberExtensions->GetValue() ) file_ext = GetGerberProtelExtension( layer ); BuildPlotFileName( &fn, outputDir.GetPath(), m_board->GetLayerName( layer ), file_ext ); wxString fullname = fn.GetFullName(); jobfile_writer.AddGbrFile( layer, fullname ); LOCALE_IO toggle; BOARD* board = m_parent->GetBoard(); PLOTTER* plotter = StartPlotBoard( board, &m_plotOpts, layer, fn.GetFullPath(), wxEmptyString ); // Print diags in messages box: wxString msg; if( plotter ) { PlotOneBoardLayer( board, plotter, layer, m_plotOpts ); plotter->EndPlot(); delete plotter; msg.Printf( _( "Plot file \"%s\" created." ), GetChars( fn.GetFullPath() ) ); reporter.Report( msg, REPORTER::RPT_ACTION ); } else { msg.Printf( _( "Unable to create file \"%s\"." ), GetChars( fn.GetFullPath() ) ); reporter.Report( msg, REPORTER::RPT_ERROR ); } } if( m_plotOpts.GetFormat() == PLOT_FORMAT_GERBER && m_plotOpts.GetCreateGerberJobFile() ) { // Pick the basename from the board file wxFileName fn( boardFilename ); // Build gerber job file from basename BuildPlotFileName( &fn, outputDir.GetPath(), "job", GerberJobFileExtension ); jobfile_writer.CreateJobFile( fn.GetFullPath() ); } }
bool DIALOG_GEN_MODULE_POSITION::CreateFiles() { BOARD * brd = m_parent->GetBoard(); wxFileName fn; wxString msg; bool singleFile = OneFileOnly(); int fullcount = 0; // Count the footprints to place, do not yet create a file int fpcount = m_parent->DoGenFootprintsPositionFile( wxEmptyString, UnitsMM(), ForceAllSmd(), 2 ); if( fpcount == 0) { wxMessageBox( _( "No modules for automated placement." ) ); return false; } // Create output directory if it does not exist (also transform it in // absolute form). Bail if it fails wxFileName outputDir = wxFileName::DirName( m_plotOpts.GetOutputDirectory() ); wxString boardFilename = m_parent->GetBoard()->GetFileName(); m_reporter = &m_messagesPanel->Reporter(); if( !EnsureFileDirectoryExists( &outputDir, boardFilename, m_reporter ) ) { msg.Printf( _( "Could not write plot files to folder \"%s\"." ), GetChars( outputDir.GetPath() ) ); DisplayError( this, msg ); return false; } fn = m_parent->GetBoard()->GetFileName(); fn.SetPath( outputDir.GetPath() ); // Create the the Front or Top side placement file, // or the single file int side = 1; if( singleFile ) { side = 2; fn.SetName( fn.GetName() + wxT( "-" ) + wxT("all") ); } else fn.SetName( fn.GetName() + wxT( "-" ) + frontSideName ); fn.SetExt( FootprintPlaceFileExtension ); fpcount = m_parent->DoGenFootprintsPositionFile( fn.GetFullPath(), UnitsMM(), ForceAllSmd(), side ); if( fpcount < 0 ) { msg.Printf( _( "Unable to create '%s'." ), GetChars( fn.GetFullPath() ) ); wxMessageBox( msg ); m_reporter->Report( msg, REPORTER::RPT_ERROR ); return false; } if( singleFile ) msg.Printf( _( "Place file: '%s'." ), GetChars( fn.GetFullPath() ) ); else msg.Printf( _( "Front side (top side) place file: '%s'." ), GetChars( fn.GetFullPath() ) ); m_reporter->Report( msg, REPORTER::RPT_INFO ); msg.Printf( _( "Component count: %d." ), fpcount ); m_reporter->Report( msg, REPORTER::RPT_INFO ); if( singleFile ) { m_reporter->Report( _( "Componment Placement File generation OK." ), REPORTER::RPT_ACTION ); return true; } // Create the Back or Bottom side placement file fullcount = fpcount; side = 0; fn = brd->GetFileName(); fn.SetPath( outputDir.GetPath() ); fn.SetName( fn.GetName() + wxT( "-" ) + backSideName ); fn.SetExt( wxT( "pos" ) ); fpcount = m_parent->DoGenFootprintsPositionFile( fn.GetFullPath(), UnitsMM(), ForceAllSmd(), side ); if( fpcount < 0 ) { msg.Printf( _( "Unable to create file '%s'." ), GetChars( fn.GetFullPath() ) ); m_reporter->Report( msg, REPORTER::RPT_ERROR ); wxMessageBox( msg ); return false; } // Display results if( !singleFile ) { msg.Printf( _( "Back side (bottom side) place file: '%s'." ), GetChars( fn.GetFullPath() ) ); m_reporter->Report( msg, REPORTER::RPT_INFO ); msg.Printf( _( "Component count: %d." ), fpcount ); m_reporter->Report( msg, REPORTER::RPT_INFO ); } if( !singleFile ) { fullcount += fpcount; msg.Printf( _( "Full component count: %d\n" ), fullcount ); m_reporter->Report( msg, REPORTER::RPT_INFO ); } m_reporter->Report( _( "Componment Placement File generation OK." ), REPORTER::RPT_ACTION ); return true; }