static void zipit_lcd_realize(SSISlave *dev, Error **errp)
{
ZipitLCD *z = FROM_SSI_SLAVE(ZipitLCD, dev);
z->selected = 0;
z->enabled = 0;
z->pos = 0;
}
static uint32_t zipit_lcd_transfer(SSISlave *dev, uint32_t value)
{
ZipitLCD *z = FROM_SSI_SLAVE(ZipitLCD, dev);
uint16_t val;
if (z->selected) {
z->buf[z->pos] = value & 0xff;
z->pos++;
}
if (z->pos == 3) {
switch (z->buf[0]) {
case 0x74:
DPRINTF("%s: reg: 0x%.2x\n", __func__, z->buf[2]);
z->cur_reg = z->buf[2];
break;
case 0x76:
val = z->buf[1] << 8 | z->buf[2];
DPRINTF("%s: value: 0x%.4x\n", __func__, val);
if (z->cur_reg == 0x22 && val == 0x0000) {
z->enabled = 1;
printf("%s: LCD enabled\n", __func__);
} else if (z->cur_reg == 0x10 && val == 0x0000) {
z->enabled = 0;
printf("%s: LCD disabled\n", __func__);
}
break;
default:
DPRINTF("%s: unknown command!\n", __func__);
break;
}
z->pos = 0;
}
return 0;
}
static int sm_lcd_init(SSISlave *dev)
{
lcd_state *s = FROM_SSI_SLAVE(lcd_state, dev);
s->brightness = 0.0;
s->con = graphic_console_init(DEVICE(dev), 0, &sm_lcd_ops, s);
qemu_console_resize(s->con, NUM_COLS, NUM_ROWS);
/* This callback informs us that brightness control is enabled */
qdev_init_gpio_in_named(DEVICE(dev), sm_lcd_backlight_enable_cb,
"backlight_enable", 1);
/* This callback informs us of the brightness level (from 0 to 255) */
qdev_init_gpio_in_named(DEVICE(dev), sm_lcd_set_backlight_level_cb,
"backlight_level", 1);
/* This callback informs us that the vibrate is on/orr */
qdev_init_gpio_in_named(DEVICE(dev), sm_lcd_vibe_ctl,
"vibe_ctl", 1);
/* This callback informs us that power is on/off */
qdev_init_gpio_in_named(DEVICE(dev), sm_lcd_power_ctl,
"power_ctl", 1);
return 0;
}
static int zipit_lcd_init(SSISlave *dev)
{
ZipitLCD *z = FROM_SSI_SLAVE(ZipitLCD, dev);
z->selected = 0;
z->enabled = 0;
z->pos = 0;
return 0;
}
static uint32_t
sm_lcd_transfer(SSISlave *dev, uint32_t data)
{
lcd_state *s = FROM_SSI_SLAVE(lcd_state, dev);
/* XXX QEMU's SPI infrastructure is implicitly MSB-first */
data = bitswap(data);
switch(s->state) {
case COMMAND:
data &= 0xfd; /* Mask VCOM bit */
switch(data) {
case 0x01: /* Write Line */
s->state = LINENO;
break;
case 0x04: /* Clear Screen */
memset(s->framebuffer, 0, sizeof(*s->framebuffer));
s->redraw = true;
break;
case 0x00: /* Toggle VCOM */
break;
default:
/* Simulate confused display controller. */
memset(s->framebuffer, 0x55, sizeof(*s->framebuffer));
s->redraw = true;
break;
}
break;
case LINENO:
if (data == 0) {
s->state = COMMAND;
} else {
s->fbindex = (data - 1) * NUM_COL_BYTES;
s->state = DATA;
}
break;
case DATA:
s->framebuffer[s->fbindex++] = data;
if (s->fbindex % NUM_COL_BYTES == 0) {
s->state = TRAILER;
}
break;
case TRAILER:
if (data != 0) {
qemu_log_mask(LOG_GUEST_ERROR,
"ls013 memory lcd received non-zero data in TRAILER\n");
}
s->state = LINENO;
s->redraw = true;
break;
}
return 0;
}
static int max111x_init(SSISlave *dev, int inputs)
{
MAX111xState *s = FROM_SSI_SLAVE(MAX111xState, dev);
qdev_init_gpio_out(&dev->qdev, &s->interrupt, 1);
s->inputs = inputs;
/* TODO: add a user interface for setting these */
s->input[0] = 0xf0;
s->input[1] = 0xe0;
s->input[2] = 0xd0;
s->input[3] = 0xc0;
s->input[4] = 0xb0;
s->input[5] = 0xa0;
s->input[6] = 0x90;
s->input[7] = 0x80;
s->com = 0;
vmstate_register(&dev->qdev, -1, &vmstate_max111x, s);
return 0;
}
static uint32_t max111x_transfer(SSISlave *dev, uint32_t value)
{
MAX111xState *s = FROM_SSI_SLAVE(MAX111xState, dev);
max111x_write(s, value);
return max111x_read(s);
}
void max111x_set_input(DeviceState *dev, int line, uint8_t value)
{
MAX111xState *s = FROM_SSI_SLAVE(MAX111xState, SSI_SLAVE_FROM_QDEV(dev));
assert(line >= 0 && line < s->inputs);
s->input[line] = value;
}
