/**
* @brief Sets a TAL PIB attribute
*
* This function is called to set the transceiver information base
* attributes.
*
* @param attribute TAL infobase attribute ID
* @param value TAL infobase attribute value to be set
*
* @return MAC_UNSUPPORTED_ATTRIBUTE if the TAL info base attribute is not found
* TAL_BUSY if the TAL is not in TAL_IDLE state. An exception is
* macBeaconTxTime which can be accepted by TAL even if TAL is not
* in TAL_IDLE state.
* MAC_SUCCESS if the attempt to set the PIB attribute was successful
* TAL_TRX_ASLEEP if trx is in SLEEP mode and access to trx is required
*/
retval_t tal_pib_set(uint8_t attribute, pib_value_t *value)
{
/*
* Do not allow any changes while ED or TX is done.
* We allow changes during RX, but it's on the user's own risk.
*/
#if (MAC_SCAN_ED_REQUEST_CONFIRM == 1)
if (tal_state == TAL_ED_RUNNING)
{
ASSERT("TAL is busy" == 0);
return TAL_BUSY;
}
#endif /* (MAC_SCAN_ED_REQUEST_CONFIRM == 1) */
/*
* Distinguish between PIBs that need to be changed in trx directly
* and those that are simple variable udpates.
* Ensure that the transceiver is not in SLEEP.
* If it is in SLEEP, change it to TRX_OFF.
*/
switch (attribute)
{
case macMaxFrameRetries:
/*
* The new PIB value is not immediately written to the
* transceiver. This is done on a frame-by-frame base.
*/
tal_pib_MaxFrameRetries = value->pib_value_8bit;
break;
case macMaxCSMABackoffs:
/*
* The new PIB value is not immediately written to the
* transceiver. This is done on a frame-by-frame base.
*/
tal_pib_MaxCSMABackoffs = value->pib_value_8bit;
break;
#ifdef BEACON_SUPPORT
case macBattLifeExt:
tal_pib_BattLifeExt = value->pib_value_bool;
break;
case macBeaconOrder:
tal_pib_BeaconOrder = value->pib_value_8bit;
break;
case macSuperframeOrder:
tal_pib_SuperFrameOrder = value->pib_value_8bit;
break;
case macBeaconTxTime:
tal_pib_BeaconTxTime = value->pib_value_32bit;
break;
#endif /* BEACON_SUPPORT */
#ifdef PROMISCUOUS_MODE
case macPromiscuousMode:
tal_pib_PromiscuousMode = value->pib_value_8bit;
if (tal_pib_PromiscuousMode)
{
tal_trx_wakeup();
/* Check if receive buffer is available or queue is not full. */
if (NULL == tal_rx_buffer)
{
set_trx_state(CMD_PLL_ON);
tal_rx_on_required = true;
}
else
{
set_trx_state(CMD_RX_ON);
}
}
else
{
set_trx_state(CMD_TRX_OFF);
tal_rx_on_required = false;
}
break;
#endif
default:
/*
* Following PIBs require access to trx.
* Therefore trx must be at least in TRX_OFF.
*/
if (tal_trx_status == TRX_SLEEP)
{
/* While trx is in SLEEP, register cannot be accessed. */
return TAL_TRX_ASLEEP;
}
switch (attribute)
{
case macMinBE:
tal_pib_MinBE = value->pib_value_8bit;
#ifndef REDUCED_PARAM_CHECK
/*
* macMinBE must not be larger than macMaxBE or calculation
* of macMaxFrameWaitTotalTime will fail.
*/
if (tal_pib_MinBE > tal_pib_MaxBE)
{
tal_pib_MinBE = tal_pib_MaxBE;
}
#endif /* REDUCED_PARAM_CHECK */
pal_trx_bit_write(SR_MIN_BE, tal_pib_MinBE);
break;
case macPANId:
tal_pib_PANId = value->pib_value_16bit;
pal_trx_reg_write(RG_PAN_ID_0, (uint8_t)tal_pib_PANId);
pal_trx_reg_write(RG_PAN_ID_1, (uint8_t)(tal_pib_PANId >> 8));
break;
case macShortAddress:
tal_pib_ShortAddress = value->pib_value_16bit;
pal_trx_reg_write(RG_SHORT_ADDR_0, (uint8_t)tal_pib_ShortAddress);
pal_trx_reg_write(RG_SHORT_ADDR_1, (uint8_t)(tal_pib_ShortAddress >> 8));
break;
case phyCurrentChannel:
if (tal_state != TAL_IDLE)
{
return TAL_BUSY;
}
if (tal_pib_CurrentPage == 5)
{
if (((uint32_t)TRX_SUPPORTED_CHANNELS_CHINA & ((uint32_t)0x01 << value->pib_value_8bit)) == false)
{
return MAC_INVALID_PARAMETER;
}
}
else
{
if (((uint32_t)TRX_SUPPORTED_CHANNELS & ((uint32_t)0x01 << value->pib_value_8bit)) == false)
{
return MAC_INVALID_PARAMETER;
}
}
{
uint8_t previous_channel;
tal_trx_status_t previous_trx_status = TRX_OFF;
previous_channel = tal_pib_CurrentChannel;
tal_pib_CurrentChannel = value->pib_value_8bit;
/*
* Set trx to "soft" off avoiding that ongoing
* transaction (e.g. ACK) are interrupted.
*/
if (tal_trx_status != TRX_OFF)
{
previous_trx_status = RX_AACK_ON; /* any other than TRX_OFF state */
do
{
/* set TRX_OFF until it could be set;
* trx might be busy */
} while (set_trx_state(CMD_TRX_OFF) != TRX_OFF);
}
/* Check if frequency band/modulation is changed. */
if (tal_pib_CurrentPage == 5)
{
pal_trx_bit_write(SR_CC_NUMBER, GET_CHINA_FREQ(tal_pib_CurrentChannel));
}
else if ((tal_pib_CurrentChannel > 0) && (previous_channel > 0))
{
pal_trx_bit_write(SR_CHANNEL, tal_pib_CurrentChannel);
}
else
{
uint8_t reg_value;
/* Set modulation and channel */
apply_channel_page_configuration(tal_pib_CurrentPage);
limit_tx_pwr();
reg_value = convert_phyTransmitPower_to_reg_value(tal_pib_TransmitPower);
pal_trx_reg_write(RG_PHY_TX_PWR, reg_value);
}
/* Re-store previous trx state */
if (previous_trx_status != TRX_OFF)
{
/* Set to default state */
set_trx_state(CMD_RX_AACK_ON);
}
}
break;
case phyCurrentPage:
if (tal_state != TAL_IDLE)
{
return TAL_BUSY;
}
else
{
uint8_t page;
tal_trx_status_t previous_trx_status = TRX_OFF;
bool ret_val;
uint8_t reg_value;
/*
* Changing the channel, channel page or modulation
* requires that TRX is in TRX_OFF.
* Store current trx state and return to default state
* after channel page has been set.
*/
if (tal_trx_status != TRX_OFF)
{
previous_trx_status = RX_AACK_ON; /* any other than TRX_OFF state */
do
{
/* set TRX_OFF until it could be set;
* trx might be busy */
} while (set_trx_state(CMD_TRX_OFF) != TRX_OFF);
}
page = value->pib_value_8bit;
ret_val = apply_channel_page_configuration(page);
if (previous_trx_status != TRX_OFF)
{
/* Set to default state */
set_trx_state(CMD_RX_AACK_ON);
}
if (ret_val)
{
tal_pib_CurrentPage = page;
}
else
{
return MAC_INVALID_PARAMETER;
}
limit_tx_pwr();
reg_value = convert_phyTransmitPower_to_reg_value(tal_pib_TransmitPower);
pal_trx_reg_write(RG_PHY_TX_PWR, reg_value);
}
break;
case macMaxBE:
tal_pib_MaxBE = value->pib_value_8bit;
#ifndef REDUCED_PARAM_CHECK
/*
* macMinBE must not be larger than macMaxBE or calculation
* of macMaxFrameWaitTotalTime will fail.
*/
if (tal_pib_MaxBE < tal_pib_MinBE)
{
tal_pib_MinBE = tal_pib_MaxBE;
}
#endif /* REDUCED_PARAM_CHECK */
pal_trx_bit_write(SR_MAX_BE, tal_pib_MaxBE);
break;
case phyTransmitPower:
{
uint8_t reg_value;
tal_pib_TransmitPower = value->pib_value_8bit;
/* Limit tal_pib_TransmitPower to max/min trx values */
limit_tx_pwr();
reg_value = convert_phyTransmitPower_to_reg_value(tal_pib_TransmitPower);
pal_trx_reg_write(RG_PHY_TX_PWR, reg_value);
}
break;
case phyCCAMode:
tal_pib_CCAMode = value->pib_value_8bit;
pal_trx_bit_write(SR_CCA_MODE, tal_pib_CCAMode);
break;
case macIeeeAddress:
{
uint8_t *ptr;
tal_pib_IeeeAddress = value->pib_value_64bit;
ptr = (uint8_t *)&tal_pib_IeeeAddress;
for (uint8_t i = 0; i < 8; i++)
{
pal_trx_reg_write((RG_IEEE_ADDR_0 + i), *ptr);
ptr++;
}
}
break;
case mac_i_pan_coordinator:
tal_pib_PrivatePanCoordinator = value->pib_value_bool;
pal_trx_bit_write(SR_AACK_I_AM_COORD, tal_pib_PrivatePanCoordinator);
break;
case macAckWaitDuration:
/*
* AT86RF212 does not support changing this value w.r.t.
* compliance operation.
*/
return MAC_UNSUPPORTED_ATTRIBUTE;
default:
return MAC_UNSUPPORTED_ATTRIBUTE;
}
break; /* end of 'default' from 'switch (attribute)' */
}
return MAC_SUCCESS;
} /* tal_pib_set() */
/**
* @brief Apply channel page configuartion to transceiver
*
* @param ch_page Channel page
*
* @return true if changes could be applied else false
*/
static bool apply_channel_page_configuration(uint8_t ch_page)
{
/*
* Before updating the transceiver a number of TAL PIB attributes need
* to be updated depending on the channel page.
*/
tal_pib_MaxFrameDuration = MAX_FRAME_DURATION;
tal_pib_SHRDuration = NO_OF_SYMBOLS_PREAMBLE_SFD;
tal_pib_SymbolsPerOctet = SYMBOLS_PER_OCTET;
switch (ch_page)
{
case 0: /* BPSK */
pal_trx_bit_write(SR_BPSK_OQPSK, BPSK_MODE);
pal_trx_bit_write(SR_GC_TX_OFFS, BPSK_TX_OFFSET);
if (tal_pib_CurrentChannel == 0)
{
pal_trx_bit_write(SR_SUB_MODE, LOW_DATA_RATE);
}
else
{
pal_trx_bit_write(SR_SUB_MODE, HIGH_DATA_RATE);
pal_trx_bit_write(SR_OQPSK_SUB1_RC_EN, HALF_SINE_FILTERING);
}
// Compliant ACK timing
pal_trx_bit_write(SR_AACK_ACK_TIME, AACK_ACK_TIME_12_SYMBOLS);
tal_pib_SupportedChannels = TRX_SUPPORTED_CHANNELS;
pal_trx_bit_write(SR_CC_BAND, 0);
pal_trx_bit_write(SR_CHANNEL, tal_pib_CurrentChannel);
break;
case 2: /* O-QPSK */
pal_trx_bit_write(SR_BPSK_OQPSK, OQPSK_MODE);
pal_trx_bit_write(SR_GC_TX_OFFS, OQPSK_TX_OFFSET);
pal_trx_bit_write(SR_OQPSK_DATA_RATE, ALTRATE_100_KBPS_OR_250_KBPS);
if (tal_pib_CurrentChannel == 0)
{
pal_trx_bit_write(SR_SUB_MODE, LOW_DATA_RATE);
}
else
{
pal_trx_bit_write(SR_SUB_MODE, HIGH_DATA_RATE);
pal_trx_bit_write(SR_OQPSK_SUB1_RC_EN, HALF_SINE_FILTERING);
}
// Compliant ACK timing
pal_trx_bit_write(SR_AACK_ACK_TIME, AACK_ACK_TIME_12_SYMBOLS);
tal_pib_SupportedChannels = TRX_SUPPORTED_CHANNELS;
pal_trx_bit_write(SR_CC_BAND, 0);
pal_trx_bit_write(SR_CHANNEL, tal_pib_CurrentChannel);
break;
case 5: /* CHINESE_BAND, O-QPSK */
pal_trx_bit_write(SR_BPSK_OQPSK, OQPSK_MODE);
pal_trx_bit_write(SR_GC_TX_OFFS, OQPSK_TX_OFFSET);
pal_trx_bit_write(SR_OQPSK_DATA_RATE, ALTRATE_100_KBPS_OR_250_KBPS);
pal_trx_bit_write(SR_OQPSK_SUB1_RC_EN, RC_0_8_FILTERING);
pal_trx_bit_write(SR_SUB_MODE, HIGH_DATA_RATE);
// Compliant ACK timing
pal_trx_bit_write(SR_AACK_ACK_TIME, AACK_ACK_TIME_12_SYMBOLS);
tal_pib_SupportedChannels = TRX_SUPPORTED_CHANNELS_CHINA;
/* Channel Page 5 supports channels 0-3. */
if (tal_pib_CurrentChannel > 3)
{
tal_pib_CurrentChannel = 0;
}
pal_trx_bit_write(SR_CC_BAND, 4);
pal_trx_bit_write(SR_CC_NUMBER, GET_CHINA_FREQ(tal_pib_CurrentChannel));
break;
#ifdef HIGH_DATA_RATE_SUPPORT
case 16: /* non-compliant OQPSK mode 1 */
pal_trx_bit_write(SR_BPSK_OQPSK, OQPSK_MODE);
pal_trx_bit_write(SR_GC_TX_OFFS, OQPSK_TX_OFFSET);
pal_trx_bit_write(SR_OQPSK_DATA_RATE, ALTRATE_200_KBPS_OR_500_KBPS);
if (tal_pib_CurrentChannel == 0)
{
pal_trx_bit_write(SR_SUB_MODE, LOW_DATA_RATE);
}
else
{
pal_trx_bit_write(SR_SUB_MODE, HIGH_DATA_RATE);
pal_trx_bit_write(SR_OQPSK_SUB1_RC_EN, HALF_SINE_FILTERING);
}
// Reduced ACK timing
pal_trx_bit_write(SR_AACK_ACK_TIME, AACK_ACK_TIME_2_SYMBOLS);
tal_pib_SupportedChannels = TRX_SUPPORTED_CHANNELS;
pal_trx_bit_write(SR_CC_BAND, 0);
pal_trx_bit_write(SR_CHANNEL, tal_pib_CurrentChannel);
break;
case 17: /* non-compliant OQPSK mode 2 */
pal_trx_bit_write(SR_BPSK_OQPSK, OQPSK_MODE);
pal_trx_bit_write(SR_GC_TX_OFFS, OQPSK_TX_OFFSET);
pal_trx_bit_write(SR_OQPSK_DATA_RATE, ALTRATE_400_KBPS_OR_1_MBPS);
if (tal_pib_CurrentChannel == 0)
{
pal_trx_bit_write(SR_SUB_MODE, LOW_DATA_RATE);
}
else
{
pal_trx_bit_write(SR_SUB_MODE, HIGH_DATA_RATE);
pal_trx_bit_write(SR_OQPSK_SUB1_RC_EN, HALF_SINE_FILTERING);
}
// Reduced ACK timing
pal_trx_bit_write(SR_AACK_ACK_TIME, AACK_ACK_TIME_2_SYMBOLS);
tal_pib_SupportedChannels = TRX_SUPPORTED_CHANNELS;
pal_trx_bit_write(SR_CC_BAND, 0);
pal_trx_bit_write(SR_CHANNEL, tal_pib_CurrentChannel);
break;
case 18: /* Chinese band, non-compliant mode 1 using O-QPSK 500 */
pal_trx_bit_write(SR_BPSK_OQPSK, OQPSK_MODE);
pal_trx_bit_write(SR_GC_TX_OFFS, OQPSK_TX_OFFSET);
pal_trx_bit_write(SR_OQPSK_DATA_RATE, ALTRATE_200_KBPS_OR_500_KBPS);
pal_trx_bit_write(SR_OQPSK_SUB1_RC_EN, RC_0_8_FILTERING);
pal_trx_bit_write(SR_SUB_MODE, HIGH_DATA_RATE);
// Reduced ACK timing
pal_trx_bit_write(SR_AACK_ACK_TIME, AACK_ACK_TIME_2_SYMBOLS);
tal_pib_SupportedChannels = TRX_SUPPORTED_CHANNELS_CHINA;
/* Channel Page 18 supports channels 0-3. */
if (tal_pib_CurrentChannel > 3)
{
tal_pib_CurrentChannel = 0;
}
pal_trx_bit_write(SR_CC_BAND, 4);
pal_trx_bit_write(SR_CC_NUMBER, GET_CHINA_FREQ(tal_pib_CurrentChannel));
break;
case 19: /* Chinese band, non-compliant mode 2 using O-QPSK 1000 */
pal_trx_bit_write(SR_BPSK_OQPSK, OQPSK_MODE);
pal_trx_bit_write(SR_GC_TX_OFFS, OQPSK_TX_OFFSET);
pal_trx_bit_write(SR_OQPSK_DATA_RATE, ALTRATE_400_KBPS_OR_1_MBPS);
pal_trx_bit_write(SR_OQPSK_SUB1_RC_EN, RC_0_8_FILTERING);
pal_trx_bit_write(SR_SUB_MODE, HIGH_DATA_RATE);
// Reduced ACK timing
pal_trx_bit_write(SR_AACK_ACK_TIME, AACK_ACK_TIME_2_SYMBOLS);
tal_pib_SupportedChannels = TRX_SUPPORTED_CHANNELS_CHINA;
/* Channel Page 18 supports channels 0-3. */
if (tal_pib_CurrentChannel > 3)
{
tal_pib_CurrentChannel = 0;
}
pal_trx_bit_write(SR_CC_BAND, 4);
pal_trx_bit_write(SR_CC_NUMBER, GET_CHINA_FREQ(tal_pib_CurrentChannel));
break;
#endif /* #ifdef HIGH_DATA_RATE_SUPPORT */
default:
return false;
}
return true;
}
/**
* \brief Apply channel page configuartion to transceiver
*
* \param ch_page Channel page
*
* \return true if changes could be applied else false
*/
static bool apply_channel_page_configuration(uint8_t ch_page)
{
/*
* Before updating the transceiver a number of TAL PIB attributes need
* to be updated depending on the channel page.
*/
/* \todo these configurations are not rate dependent here! But shall be!
**/
tal_pib.MaxFrameDuration = MAX_FRAME_DURATION;
tal_pib.SHRDuration = NO_OF_SYMBOLS_PREAMBLE_SFD;
tal_pib.SymbolsPerOctet = SYMBOLS_PER_OCTET;
switch (ch_page) {
case 0: /* BPSK */
trx_bit_write(SR_BPSK_OQPSK, BPSK_MODE);
trx_bit_write(SR_GC_TX_OFFS, BPSK_TX_OFFSET);
trx_bit_write(SR_ALT_SPECTRUM, ALT_SPECTRUM_DISABLE);
if (tal_pib.CurrentChannel == 0) { /* BPSK20, EU */
trx_bit_write(SR_SUB_MODE, LOW_DATA_RATE);
} else { /* BPSK40, NA */
trx_bit_write(SR_SUB_MODE, HIGH_DATA_RATE);
}
/* Compliant ACK timing */
trx_bit_write(SR_AACK_ACK_TIME, ACK_TIME_12_SYMBOLS);
tal_pib.SupportedChannels = TRX_SUPPORTED_CHANNELS;
trx_bit_write(SR_CC_BAND, 0);
trx_bit_write(SR_CHANNEL, tal_pib.CurrentChannel);
break;
case 2: /* O-QPSK */
trx_bit_write(SR_BPSK_OQPSK, OQPSK_MODE);
trx_bit_write(SR_GC_TX_OFFS, OQPSK_TX_OFFSET);
trx_bit_write(SR_OQPSK_DATA_RATE,
ALTRATE_100_KBPS_OR_250_KBPS);
trx_bit_write(SR_ALT_SPECTRUM, ALT_SPECTRUM_DISABLE);
if (tal_pib.CurrentChannel == 0) { /* OQPSK100, EU */
trx_bit_write(SR_SUB_MODE, LOW_DATA_RATE);
} else { /* OQPSK250, NA */
trx_bit_write(SR_SUB_MODE, HIGH_DATA_RATE);
}
/* Compliant ACK timing */
trx_bit_write(SR_AACK_ACK_TIME, ACK_TIME_12_SYMBOLS);
tal_pib.SupportedChannels = TRX_SUPPORTED_CHANNELS;
trx_bit_write(SR_CC_BAND, 0);
trx_bit_write(SR_CHANNEL, tal_pib.CurrentChannel);
break;
case 5: /* CHINESE_BAND, O-QPSK */
trx_bit_write(SR_BPSK_OQPSK, OQPSK_MODE);
trx_bit_write(SR_GC_TX_OFFS, OQPSK_TX_OFFSET);
trx_bit_write(SR_OQPSK_DATA_RATE,
ALTRATE_100_KBPS_OR_250_KBPS);
trx_bit_write(SR_ALT_SPECTRUM, ALT_SPECTRUM_ENABLE);
trx_bit_write(SR_SUB_MODE, HIGH_DATA_RATE);
/* Compliant ACK timing */
trx_bit_write(SR_AACK_ACK_TIME, ACK_TIME_12_SYMBOLS);
tal_pib.SupportedChannels = TRX_SUPPORTED_CHANNELS_CHINA;
/* Channel Page 5 supports channels 0-3. */
if (tal_pib.CurrentChannel > 3) {
tal_pib.CurrentChannel = 0;
}
trx_bit_write(SR_CC_BAND, 4);
trx_bit_write(SR_CC_NUMBER,
GET_CHINA_FREQ(tal_pib.CurrentChannel));
break;
#ifdef HIGH_DATA_RATE_SUPPORT
case 16: /* non-compliant OQPSK mode 1 */
trx_bit_write(SR_BPSK_OQPSK, OQPSK_MODE);
trx_bit_write(SR_GC_TX_OFFS, OQPSK_TX_OFFSET);
trx_bit_write(SR_ALT_SPECTRUM, ALT_SPECTRUM_DISABLE);
trx_bit_write(SR_OQPSK_DATA_RATE,
ALTRATE_200_KBPS_OR_500_KBPS);
if (tal_pib.CurrentChannel == 0) { /* 200kbps, EU */
trx_bit_write(SR_SUB_MODE, LOW_DATA_RATE);
} else { /* 500kbps, NA */
trx_bit_write(SR_SUB_MODE, HIGH_DATA_RATE);
}
/* Reduced ACK timing */
trx_bit_write(SR_AACK_ACK_TIME, ACK_TIME_2_SYMBOLS);
tal_pib.SupportedChannels = TRX_SUPPORTED_CHANNELS;
trx_bit_write(SR_CC_BAND, 0);
trx_bit_write(SR_CHANNEL, tal_pib.CurrentChannel);
break;
case 17: /* non-compliant OQPSK mode 2 */
trx_bit_write(SR_BPSK_OQPSK, OQPSK_MODE);
trx_bit_write(SR_GC_TX_OFFS, OQPSK_TX_OFFSET);
trx_bit_write(SR_ALT_SPECTRUM, ALT_SPECTRUM_DISABLE);
trx_bit_write(SR_OQPSK_DATA_RATE,
ALTRATE_400_KBPS_OR_1_MBPS);
if (tal_pib.CurrentChannel == 0) { /* 400kbps, EU */
trx_bit_write(SR_SUB_MODE, LOW_DATA_RATE);
} else { /* 1000kbps, NA */
trx_bit_write(SR_SUB_MODE, HIGH_DATA_RATE);
}
/* Reduced ACK timing */
trx_bit_write(SR_AACK_ACK_TIME, ACK_TIME_2_SYMBOLS);
tal_pib.SupportedChannels = TRX_SUPPORTED_CHANNELS;
trx_bit_write(SR_CC_BAND, 0);
trx_bit_write(SR_CHANNEL, tal_pib.CurrentChannel);
break;
case 18: /* Chinese band, non-compliant mode 1 using O-QPSK 500 */
trx_bit_write(SR_BPSK_OQPSK, OQPSK_MODE);
trx_bit_write(SR_GC_TX_OFFS, OQPSK_TX_OFFSET);
trx_bit_write(SR_OQPSK_DATA_RATE,
ALTRATE_200_KBPS_OR_500_KBPS);
trx_bit_write(SR_ALT_SPECTRUM, ALT_SPECTRUM_ENABLE);
trx_bit_write(SR_SUB_MODE, HIGH_DATA_RATE);
/* Reduced ACK timing */
trx_bit_write(SR_AACK_ACK_TIME, ACK_TIME_2_SYMBOLS);
tal_pib.SupportedChannels = TRX_SUPPORTED_CHANNELS_CHINA;
/* Channel Page 18 supports channels 0-3. */
if (tal_pib.CurrentChannel > 3) {
tal_pib.CurrentChannel = 0;
}
trx_bit_write(SR_CC_BAND, 4);
trx_bit_write(SR_CC_NUMBER,
GET_CHINA_FREQ(tal_pib.CurrentChannel));
break;
case 19: /* Chinese band, non-compliant mode 2 using O-QPSK 1000 */
trx_bit_write(SR_BPSK_OQPSK, OQPSK_MODE);
trx_bit_write(SR_GC_TX_OFFS, OQPSK_TX_OFFSET);
trx_bit_write(SR_OQPSK_DATA_RATE,
ALTRATE_400_KBPS_OR_1_MBPS);
trx_bit_write(SR_ALT_SPECTRUM, ALT_SPECTRUM_ENABLE);
trx_bit_write(SR_SUB_MODE, HIGH_DATA_RATE);
/* Reduced ACK timing */
trx_bit_write(SR_AACK_ACK_TIME, ACK_TIME_2_SYMBOLS);
tal_pib.SupportedChannels = TRX_SUPPORTED_CHANNELS_CHINA;
/* Channel Page 18 supports channels 0-3. */
if (tal_pib.CurrentChannel > 3) {
tal_pib.CurrentChannel = 0;
}
trx_bit_write(SR_CC_BAND, 4);
trx_bit_write(SR_CC_NUMBER,
GET_CHINA_FREQ(tal_pib.CurrentChannel));
break;
#endif /* #ifdef HIGH_DATA_RATE_SUPPORT */
default:
return false;
}
return true;
}
