static void _Show(const char* s0, const char* s1) {
GUIDEMO_SetColor(GUI_WHITE);
#if (LCD_YSIZE < 160)
GUI_SetFont(&GUI_Font8_ASCII);
#else
GUI_SetFont(&GUI_Font13B_ASCII);
#endif
GUI_DispString("\n");
#if (LCD_YSIZE < 128)
GUIDEMO_Delay(200);
GUI_GotoXY(0, LCD_YSIZE / 2 - 6);
GUI_ClearRect(0, 24, LCD_XSIZE - 1, LCD_YSIZE - 1);
GUIDEMO_Delay(200);
#endif
GUI_DispString(s0);
GUIDEMO_Delay(500);
#if GUIDEMO_LARGE
GUI_GotoX(110);
GUIDEMO_SetColor(GUI_GREEN);
#else
GUI_GotoX(100);
GUIDEMO_SetColor(GUI_BLUE);
#endif
#if (LCD_XSIZE < 320)
GUI_DispString("\n");
#if (LCD_XSIZE < 200)
GUI_GotoX(10);
#else
GUI_GotoX(LCD_XSIZE / 6);
#endif
#endif
GUI_DispString(s1);
GUIDEMO_Delay(1500);
}
/*********************************************************************
*
* _PrintResult
*/
static void _PrintResult(int Cnt) {
if (_NumPrimes != 168) {
GUI_DispString("Error");
} else {
GUI_DispString("Loops/sec: ");
_PrintDec(Cnt);
}
GUI_DispString("\n");
}
/*********************************************************************
*
* _DispFillrate
*/
static void _DispFillrate(char * sPre, float FillratePPS, char * sPost) {
unsigned int i;
char * apLabel[] = {" KPixel/s", " MPixel/s"};
GUI_DispString(sPre);
for (i = 0; i < GUI_COUNTOF(apLabel); i++) {
FillratePPS /= 1000;
if (FillratePPS < 1000) {
GUI_DispFloatFix((float)FillratePPS, 7, 3);
GUI_DispString(apLabel[i]);
break;
}
}
GUI_DispString(sPost);
}
/*********************************************************************
*
* GUI_DispSDecShift
*/
void GUI_DispSDecShift(I32 v, U8 Len, U8 Shift) {
char ac[12];
char* s = ac;
v = GUI_AddSign(v, &s);
GUI_AddDecShift(v, --Len, Shift, &s);
GUI_DispString(ac);
}
static void _cbCmdWin(WM_MESSAGE* pMsg) {
switch (pMsg->MsgId) {
case WM_PAINT:
/* Update info in command window */
GUI_SetBkColor(GUI_GRAY);
GUI_Clear();
GUI_DispStringAt("Demo ", 0, 0);
GUI_DispDecMin(_iTest + 1);
GUI_DispString(".");
GUI_DispDecMin(_iTestMinor);
GUI_DispString("/");
GUI_DispDecMin(countof(_apfTest));
default:
WM_DefaultProc(pMsg);
}
}
/*********************************************************************
*
* GUI_Init
*
* Purpose:
* Init of GUI internal data structures & variables
*/
int GUI_Init(void) {
int r;
GUI_DEBUG_LOG("\nGUI_Init()");
/* Init system wide globals first */
GUI_DecChar = '.';
GUI_X_Init();
/* Init context */
_InitContext(&GUI_Context);
GUITASK_INIT();
r = LCD_Init();
#if GUI_WINSUPPORT
WM_Init();
#endif
GUITASK_COPY_CONTEXT();
#if defined(GUI_TRIAL_VERSION)
#if GUI_TRIAL_VERSION
GUI_DispString( "This software\n"
"contains an eval-\n"
"uC/GUI build.\n"
"\n"
"A license is\n"
"required to use\n"
"it in a product.\n\n"
"www.segger.com\n");
GUI_GotoXY(0, 0);
GUI_X_Delay(1000);
GUI_Clear();
#endif
#endif
return r;
}
void DisplayArticle(const char* pArticle)
{
int i,j;
char cString[51];
const char* pIndex;
GUI_GotoXY(0,0);
GUI_DispString(pArticle);
/*
pIndex = pArticle;
i=j=0;
while(1)
{
if( strlen (&pIndex[i]))
{
memset(cString, 0, sizeof(cString));
strncpy(cString, &pIndex[i], 50);
GUI_DispStringAt(cString,0,j*24);
i+=strlen(cString);
if(++j >=25)
{
j = 0;
GUI_Clear();
}
}
else
{
break;
}
}
*/
}
void MainTask(void) {
GUI_Init();
GUI_DispString("Hello World!");
while(1) {
GUI_Delay(500);
}
}
/*********************************************************************
*
* _DrawPart
*/
static void _DrawPart(const PROGBAR_Obj* pObj, int Index,
int xText, int yText, const char* pText) {
LCD_SetBkColor(pObj->BarColor[Index]);
LCD_SetColor(pObj->TextColor[Index]);
GUI_Clear();
GUI_GotoXY(xText, yText);
GUI_DispString(pText);
}
/*********************************************************************
*
* GUI_DispStringAt
*/
void GUI_DispStringAt(const char GUI_UNI_PTR *s, int x, int y)
{
GUI_LOCK();
GUI_Context.DispPosX = x;
GUI_Context.DispPosY = y;
GUI_DispString(s);
GUI_UNLOCK();
}
/*********************************************************************
*
* _ExecBigFont
*/
static void _ExecBigFont(void * p) {
char * s;
int i;
s = (char *)p;
GUI_SetLBorder(0);
GUI_DispStringAt(s, 0, 0);
for (i = 0; i < 1; i++) {
GUI_DispString(s);
}
GUI_SetLBorder(1);
GUI_DispStringAt(s, 1, 0);
for (i = 0; i < 1; i++) {
GUI_DispString(s);
}
GUI_SetLBorder(0);
}
/*********************************************************************
*
* _ShowEdgeWeights
*/
static void _ShowEdgeWeights(void) {
const char * Weight_name[] = { "\nlight: ", "\nsemi-light: ", "\nregular: ", "\nsemi-bold: ", "\nbold: " };
const char Chinese_string[] = { "\xe5\x9f\xba\xe6\x9c\xac\xe4\xb8\x8a\xe8\xae\xa1\xe7\xae\x97\xe6\x9c\xba\xe5\x8f\xaa\xe6\x98\xaf\xe5\xa4\x84\xe7\x90\x86\xe6\x95\xb0\xe5\xad\x97\xe5\xae\x83\xe4\xbb\xac\xe6\x8c\x87\xe5\xae\x9a\xe4\xb8\x80\xe4\xb8\xaa\n" };
const char Weight_order[] = { 0, 3, 1, 2, 4 };
int i;
int j;
GUI_Clear();
i = 0;
GUI_ITYPE_GetFamilyName(&_aFont[i], _acFamily, sizeof(_acFamily));
GUI_ITYPE_GetStyleName(&_aFont[i], _acStyle, sizeof(_acStyle));
GUI_SetFont(&GUI_Font20_1);
GUI_DispString(" Edge font: ");
GUI_DispString(_acFamily);
GUI_DispString(", ");
GUI_DispString(_acStyle);
GUI_DispNextLine();
GUI_DrawHLine(GUI_GetDispPosY(), 0, 0xfff);
GUI_SetFont(&_aFont[1]);
GUI_ITYPE_SetOutputStyle(&_aFont[1], &_aCS[1], (long)ITYPE_NO_EFFECT); // Turn off all effects
GUI_ITYPE_SetOutputStyle(&_aFont[1], &_aCS[1], (long)ITYPE_GRAYMAP4); // Edge graymap output
GUI_DispString("** iType Edge CSM tuning, 5 weights in the same font **");
for (j = 0; j < 5; j++){
i = Weight_order[j];
GUI_SetFont(&_aFont[i]);
GUI_ITYPE_SetOutputStyle(&_aFont[i], &_aCS[i], (long)ITYPE_NO_EFFECT); // Turn off all effects
GUI_ITYPE_SetOutputStyle(&_aFont[i], &_aCS[i], (long)ITYPE_EDGE_GRAYMAP4); // Edge graymap output
GUI_DispNextLine();
GUI_DispString(Weight_name[j]);
GUI_UC_SetEncodeUTF8();
GUI_DispString(Chinese_string);
GUI_UC_SetEncodeNone();
}
GUI_Delay(PAGE_DELAY);
}
static void _UpdateCmdWin(void) {
#if GUI_WINSUPPORT && GUIDEMO_LARGE
/* Update info in command window */
WM_HWIN hWin;
GUI_CONTEXT ContextOld;
GUI_SaveContext(&ContextOld);
hWin = WM_SelectWindow(_ahInfoWin[1]);
GUI_SetDefault();
GUI_SetBkColor(GUI_GRAY);
GUI_Clear();
GUI_DispStringAt("Demo ", 0, 0);
GUI_DispDecMin(_iTest + 1);
GUI_DispString(".");
GUI_DispDecMin(_iTestMinor);
GUI_DispString("/");
GUI_DispDecMin(countof(_apfTest));
WM_SelectWindow(hWin);
GUI_RestoreContext(&ContextOld);
#endif
}
static void _ShowFonts(const char *s, const char *pMessage, const GUI_FONT **pPropFonts) {
int i;
_Label(s);
GUI_GotoXY(0, _GetYPos());
for (i=0;pPropFonts[i];i++) {
GUI_SetFont(pPropFonts[i]);
GUI_DispString(pMessage);
GUI_DispNextLine();
}
GUIDEMO_Wait();
GUIDEMO_NotifyStartNext();
}
void MainTask(void) {
int i=0;
/*
ToDo: Make sure hardware is initilized first!!
*/
GUI_Init();
GUI_DispString("Hello world!");
while(1) {
GUI_DispDecAt( i++, 20,20,4);
if (i>9999) i=0;
}
}
int main(void)
{
uint32_t i;
DelayInit();
GPIO_QuickInit(HW_GPIOE, 6, kGPIO_Mode_OPP);
UART_QuickInit(UART0_RX_PD06_TX_PD07, 115200);
printf("flexbus lcd test\r\n");
GUI_Init();
GUI_DispString("ucGUI");
GUI_DispString(GUI_GetVersionString());
GUI_DispString("\r\nHello world!");
while(1)
{
GUI_DispDecAt( i++, 20,20,4);
if (i>9999)
{
i=0;
}
}
}
/*********************************************************************
*
* 在触摸校正的时候使用这个来读取ADC的值
*/
void Touch_MainTask(void) {
GUI_CURSOR_Show();
GUI_CURSOR_Select(&GUI_CursorCrossL);
GUI_SetBkColor(GUI_WHITE);
GUI_SetColor(GUI_BLACK);
GUI_Clear();
GUI_DispString("Measurement of\nA/D converter values");
while (1) {
GUI_PID_STATE TouchState;
int xPhys, yPhys;
GUI_TOUCH_GetState(&TouchState); /* Get the touch position in pixel */
xPhys = GUI_TOUCH_GetxPhys(); /* Get the A/D mesurement result in x */
yPhys = GUI_TOUCH_GetyPhys(); /* Get the A/D mesurement result in y */
/* Display the measurement result */
GUI_SetColor(GUI_BLUE);
GUI_DispStringAt("Analog input:\n", 0, 20);
GUI_GotoY(GUI_GetDispPosY() + 2);
GUI_DispString("x:");
GUI_DispDec(xPhys, 4);
GUI_DispString(", y:");
GUI_DispDec(yPhys, 4);
/* Display the according position */
GUI_SetColor(GUI_RED);
GUI_GotoY(GUI_GetDispPosY() + 4);
GUI_DispString("\nPosition:\n");
GUI_GotoY(GUI_GetDispPosY() + 2);
GUI_DispString("x:");
GUI_DispDec(TouchState.x,4);
GUI_DispString(", y:");
GUI_DispDec(TouchState.y,4);
/* Wait a while */
GUI_Delay(100);
};
}
int main(void)
{
DelayInit();
GPIO_QuickInit(HW_GPIOE, 6, kGPIO_Mode_OPP);
SRAM_Init();
UART_QuickInit(UART0_RX_PD06_TX_PD07, 115200);
GUI_Init();
GUI_DispString("BMP file test\r\n");
GUI_DispString("please insert SD card...\r\n");
SD_QuickInit(10*1000*1000);
printf("SD size:%dMB\r\n", SD_GetSizeInMB());
FATFS fs_sd;
FATFS *fs = &fs_sd;
/* 挂载文件系统 */
f_mount(fs, "0:", 0);
while(1)
{
scan_files("0:");
GPIO_ToggleBit(HW_GPIOE, 6);
}
}
/********************************************************************
*
* _Explain
*/
static void _Explain(void) {
int i;
GUI_SetTextMode(GUI_TM_XOR);
GUI_SetFont(&GUI_Font16B_ASCII);
GUI_DispStringHCenterAt("MEMDEV_Printing", 160, 0);
GUI_GotoXY(0,20);
GUI_SetFont(&GUI_Font6x8);
for (i = 0; i < GUI_COUNTOF(_acText); i++) {
GUI_DispString(_acText[i]);
GUI_DispNextLine();
}
GUI_SetTextMode(GUI_TM_TRANS);
}
void MainTask(void) {
GUI_PID_STATE TouchState;
GUI_Init();
GUI_CURSOR_Show();
GUI_Delay(1000);
GUI_CURSOR_Select(&GUI_CursorCrossL);
GUI_Delay(1000);
while (1) {
GUI_TOUCH_GetState(&TouchState);
GUI_DispStringAt("Analog input: ", 0, 40);
GUI_DispDec(GUI_TOUCH_GetxPhys(),4);
GUI_DispString(",");
GUI_DispDec(GUI_TOUCH_GetyPhys(),4);
GUI_DispStringAt("TOUCH_X_MeasureX: ",0,60);
GUI_DispDec(TouchState.x,4);
GUI_DispString(",");
GUI_DispDec(TouchState.y,4);
GUI_Delay(100);
};
}
/*********************************************************************
*
* _ShowLanguages
*/
static void _ShowLanguages(void) {
const char Bopomofo_string[] = { "\nBopomofo: \xe3\x84\x85 \xe3\x84\x86 \xe3\x84\x87 \xe3\x84\x88 \xe3\x84\x89 \xe3\x84\x8a \xe3\x84\x8b \xe3\x84\x8c \xe3\x84\x8d \xe3\x84\x8e \xe3\x84\x8f \xe3\x84\x90 \xe3\x84\x91 \xe3\x84\x92 \xe3\x84\x93\n" };
const char Simplified_Chinese[] = { "\nSimplified: \xe5\x9f\xba\xe6\x9c\xac\xe4\xb8\x8a\xe8\xae\xa1\xe7\xae\x97\xe6\x9c\xba\xe5\x8f\xaa\xe6\x98\xaf\xe5\xa4\x84\xe7\x90\x86\xe6\x95\xb0\xe5\xad\x97\xe5\xae\x83\xe4\xbb\xac\xe6\x8c\x87\xe5\xae\x9a\n" };
const char Traditional_Chinese[] = { "\nTraditional: \xe9\x80\x99\xe4\xba\x9b\xe7\xb7\xa8\xe7\xa2\xbc\xe7\xb3\xbb\xe7\xb5\xb1\xe4\xb9\x9f\xe6\x9c\x83\xe4\xba\x92\xe7\x9b\xb8\xe8\xa1\x9d\xe7\xaa\x81\xe4\xb9\x9f\xe5\xb0\xb1\xe6\x98\xaf\xe8\xaa\xaa\xe5\x85\xa9\xe7\xa8\xae" };
int i;
GUI_Clear();
i = 0;
GUI_ITYPE_GetFamilyName(&_aFont[i], _acFamily, sizeof(_acFamily));
GUI_ITYPE_GetStyleName(&_aFont[i], _acStyle, sizeof(_acStyle));
GUI_SetFont(&GUI_Font20_1);
GUI_DispString(" Linked font: ");
GUI_DispString(_acFamily);
GUI_DispString(", ");
GUI_DispString(_acStyle);
GUI_DispNextLine();
GUI_DrawHLine(GUI_GetDispPosY(), 0, 0xfff);
//
// Show alphabet strings
//
GUI_SetFont(&_aFont[i]);
GUI_DispString("** iType User Defined Linked Font **");
GUI_UC_SetEncodeUTF8();
GUI_ITYPE_SetOutputStyle(&_aFont[i], &_aCS[i], (long)ITYPE_NO_EFFECT); // Turn off all effects
GUI_ITYPE_SetOutputStyle(&_aFont[i], &_aCS[i], (long)ITYPE_GRAYMAP4); // Graymap output
GUI_DispString("\nabcdefghijklmnopqrstuvwxyz\n");
GUI_DispString("ABCDEFGHIJKLMNOPQRSTUVWXYZ\n");
//
// Show language strings
//
GUI_DispString(Bopomofo_string);
GUI_DispString(Simplified_Chinese);
GUI_DispString(Traditional_Chinese);
GUI_UC_SetEncodeNone();
GUI_Delay(PAGE_DELAY);
}
/*********************************************************************
*
* GUI_DispDecSpace
*/
void GUI_DispDecSpace(I32 v, U8 MaxDigits) {
char ac[12];
char* s = ac;
U8 Len;
if (v < 0) {
v = GUI_AddSign(v, &s);
MaxDigits--;
}
Len = GUI_Long2Len(v);
while (Len++ < MaxDigits) {
*s++ = ' ';
}
GUI_AddDecMin(v, &s);
GUI_DispString(ac);
}
int main(void)
{
GUI_MEMDEV_Handle hMem0,hMem1;
SysTick_Config(180000);
SDRAM_Init();
LCD_Config();
GUI_Init();
GUI_SetFont(&GUI_Font32B_ASCII);
GUI_SetBkColor(GUI_BLUE);
GUI_SetColor(GUI_YELLOW);
GUI_Clear();
// GUI_DispStringAt("blacklight",0,100);
// GUIDEMO_Main();
hMem0 = GUI_MEMDEV_CreateFixed(0,0,100,50,GUI_MEMDEV_NOTRANS,GUI_MEMDEV_APILIST_32,GUI_COLOR_CONV_888);
hMem1 = GUI_MEMDEV_CreateFixed(0,0,100,50,GUI_MEMDEV_NOTRANS,GUI_MEMDEV_APILIST_32,GUI_COLOR_CONV_888);
GUI_MEMDEV_Select(hMem0);
GUI_Clear();
GUI_DispString("Text");
GUI_MEMDEV_CopyToLCDAt(hMem0,0,0);
while(1)
{
GUI_MEMDEV_Select(hMem1);
GUI_MEMDEV_DrawPerspectiveX(hMem0,0,0,50,50-50*i/100,100-100*i/100,25*i/100);
GUI_MEMDEV_CopyToLCDAt(hMem1,i,50+i);
GUI_Delay(10);
GUI_MEMDEV_Select(hMem1);
GUI_Clear();
GUI_MEMDEV_CopyToLCDAt(hMem1,i,50+i);
i+=1;
if(i>100)
{
i=0;
}
}
while(1);
}
int main(void)
{
DelayInit();
GPIO_QuickInit(HW_GPIOE, 6, kGPIO_Mode_OPP);
UART_QuickInit(UART0_RX_PD06_TX_PD07, 115200);
printf("spi touch screen test\r\n");
/* 初始化SPI2 接口连接触控屏的触控芯片*/
SPI_QuickInit(SPI2_SCK_PD12_SOUT_PD13_SIN_PD14, kSPI_CPOL0_CPHA0, 2*1000*1000);
PORT_PinMuxConfig(HW_GPIOD, 11, kPinAlt2); /* SPI2_PCS0 */
/* 初始化触控芯片 使用CS0片选 */
ads7843_init(HW_SPI2, HW_SPI_CS0);
GUI_Init();//液晶屏界面初始化
GUI_SetBkColor(GUI_WHITE); //设置背景色
GUI_SetColor(GUI_BLACK); //设置前景色
GUI_Clear(); //清屏
GUI_SetPenSize(3); //设置点的大小
GUI_DispString("Measurement of\nA/D converter values");
while (1)
{
GUI_PID_STATE TouchState;
int xPhys, yPhys;
GUI_TOUCH_GetState(&TouchState); /* 获得触控位置 */
xPhys = GUI_TOUCH_GetxPhys(); /* 获得x轴的测量值 */
yPhys = GUI_TOUCH_GetyPhys(); /* 获得y轴的测量值 */
/* 显示测量结果 */
GUI_SetColor(GUI_BLUE);
GUI_DispStringAt("Analog input:\n", 0, 20);
GUI_GotoY(GUI_GetDispPosY() + 2);
GUI_DispString("x:");
GUI_DispDec(xPhys, 4);
GUI_DispString(", y:");
GUI_DispDec(yPhys, 4);
/* Display the according position */
GUI_SetColor(GUI_RED);
GUI_GotoY(GUI_GetDispPosY() + 4);
GUI_DispString("\nPosition:\n");
GUI_GotoY(GUI_GetDispPosY() + 2);
GUI_DispString("x:");
GUI_DispDec(TouchState.x,4);
GUI_DispString(", y:");
GUI_DispDec(TouchState.y,4);
GUI_DrawPoint(TouchState.x, TouchState.y);
GUI_TOUCH_Exec();
}
}
/*********************************************************************
*
* _ShowDynamicCSM
*
* Function description
* Shows 5 different weights of the same font by applying dynamic CSM adjustments.
*/
static void _ShowDynamicCSM(void) {
double Alpha;
double S0;
double S1;
double T0;
double T1;
double R;
int i;
int j;
int N;
N = 5;
GUI_Clear();
i = 0;
GUI_ITYPE_GetFamilyName(&_aFont[i], _acFamily, sizeof(_acFamily));
GUI_ITYPE_GetStyleName(&_aFont[i], _acStyle, sizeof(_acStyle));
GUI_SetFont(&GUI_Font20_1);
GUI_DispString(" Edge font: ");
GUI_DispString(_acFamily);
GUI_DispString(", ");
GUI_DispString(_acStyle);
GUI_DispNextLine();
GUI_DrawHLine(GUI_GetDispPosY(), 0, 0xfff);
GUI_UC_SetEncodeUTF8();
GUI_SetFont(&_aFont[0]);
GUI_ITYPE_SetOutputStyle(&_aFont[0], &_aCS[0], (long)ITYPE_NO_EFFECT); // Turn off all effects
GUI_ITYPE_SetOutputStyle(&_aFont[0], &_aCS[0], (long)ITYPE_EDGE_GRAYMAP4); // Edge graymap output
GUI_DispString("** iType Dynamic CSM tuning **\n");
GUI_DispNextLine();
//
// Parameters for adjustments
//
R = 1.4;
S0 = 0.0;
S1 = -0.001;
T0 = 0.01;
T1 = 0.007;
//
// Make 5 sets of adjustments which range from -R to R.
//
for (j = 0; j < N; j++){
Alpha = R * (2 * j / (N - 1) - 1);
GUI_ITYPE_SetCSMAdjustments(&_aFont[i], &_aCS[i], (FS_FIXED)(Alpha*S0*65536), (FS_FIXED)(Alpha*S1*65536), (FS_FIXED)(Alpha*T0*65536), (FS_FIXED)(Alpha*T1*65536));
GUI_DispString("\xe5\x9f\xba\xe6\x9c\xac\xe4\xb8\x8a\xe8\xae\xa1\xe7\xae\x97\xe6\x9c\xba\xe5\x8f\xaa\xe6\x98\xaf\xe5\xa4\x84\xe7\x90\x86\xe6\x95\xb0\xe5\xad\x97\xe5\xae\x83\xe4\xbb\xac\xe6\x8c\x87\xe5\xae\x9a\xe4\xb8\x80\xe4\xb8\xaa\n");
}
GUI_Delay(PAGE_DELAY);
}
/* 显示BMP图片 */
static int _DrawBMPFile(char *path)
{
FRESULT rc;
uint32_t size;
FIL fil;
uint8_t *pFile = (uint8_t*)SRAM_START_ADDRESS;
UINT br;
/* 读取文件 */
rc = f_open(&fil, path, FA_READ);
ERROR_TRACE(rc);
if(rc) return 1;
size = f_size(&fil);
printf("file size:%d\r\n", size);
if(size > SRAM_SIZE)
{
printf("file size to large\r\n");
rc = f_close(&fil);
return 2;
}
rc = f_read(&fil, pFile, size, &br);
if(rc || br != size)
{
printf("file data read failed\r\n");
rc = f_close(&fil);
return 3;
}
printf("Xsize:%d Ysize:%d\r\n", GUI_BMP_GetXSize(pFile), GUI_BMP_GetYSize(pFile));
GUI_Clear();
if(GUI_BMP_Draw(pFile, 0, 0))
{
GUI_DispString("BMP file display failed!");
}
rc = f_close(&fil);
ERROR_TRACE(rc);
return 0;
}
/*********************************************************************
*
* _ShowText
*/
static void _ShowText(void) {
int i;
GUI_Clear();
i = 0;
GUI_TTF_GetFamilyName(&_aFont[i], _acFamily, sizeof(_acFamily));
GUI_TTF_GetStyleName(&_aFont[i], _acStyle, sizeof(_acStyle));
GUI_SetFont(&GUI_Font20_1);
GUI_DispString(_acFamily);
GUI_DispString(", ");
GUI_DispString(_acStyle);
GUI_DispNextLine();
GUI_DrawHLine(GUI_GetDispPosY(), 0, 0xfff);
GUI_SetFont(&_aFont[i]);
GUI_DispString("abcdefghijklmnopqrstuvwxyz\n");
GUI_DispString("ABCDEFGHIJKLMNOPQRSTUVWXYZ\n");
GUI_DispString("123456789.:,;(:*!?')\n");
GUI_DrawHLine(GUI_GetDispPosY(), 0, 0xfff);
for (i = 0; i < GUI_COUNTOF(_aHeight); i++) {
GUI_SetFont(&_aFont[i]);
GUI_DispString("The quick brown fox jumps over the lazy dog. 1234567890\n");
}
GUI_Delay(1000);
}
void _ExecCalibration(void) {
int ax_Phys[2],ay_Phys[2];
/* calculate log. Positions */
int ax[2] = { 15, LCD_XSIZE -1-15};
// const int ay[2] = { 15, LCD_YSIZE-1-15};
int ay[2] = { LCD_YSIZE-1-15, 15};
CalibrationComplete = 0;
GUI_TOUCH_SetDefaultCalibration();
/* _Calibrate upper left */
GUI_SetBkColor(GUI_RED);
GUI_Clear();
GUI_SetColor(GUI_WHITE); GUI_FillCircle(ax[0], ay[0], 10);
GUI_SetColor(GUI_RED); GUI_FillCircle(ax[0], ay[0], 5);
GUI_SetColor(GUI_WHITE);
GUI_DispStringAt("Press here", ax[0]+20, ay[0]);
do {
GUI_PID_STATE State;
GUI_TOUCH_GetState(&State);
if (State.Pressed) {
ax_Phys[0] = GUI_TOUCH_GetxPhys();
ay_Phys[0] = GUI_TOUCH_GetyPhys();
break;
}
GUI_Delay (100);
} while (1);
/* Tell user to release */
GUI_Clear();
GUI_DispStringAt("OK", ax[0]+20, ay[0]);
do {
GUI_PID_STATE State;
GUI_TOUCH_GetState(&State);
if (State.Pressed == 0) {
break;
}
GUI_Delay (100);
} while (1);
/* _Calibrate lower right */
GUI_SetBkColor(GUI_RED);
GUI_Clear();
GUI_SetColor(GUI_WHITE); GUI_FillCircle(ax[1], ay[1], 10);
GUI_SetColor(GUI_RED); GUI_FillCircle(ax[1], ay[1], 5);
GUI_SetColor(GUI_WHITE);
GUI_SetTextAlign(GUI_TA_RIGHT);
GUI_DispStringAt("Press here", ax[1]-20, ay[1]);
do {
GUI_PID_STATE State;
GUI_TOUCH_GetState(&State);
if (State.Pressed) {
ax_Phys[1] = GUI_TOUCH_GetxPhys();
ay_Phys[1] = GUI_TOUCH_GetyPhys();
break;
}
GUI_Delay (100);
} while (1);
GUI_TOUCH_Calibrate(GUI_COORD_X, ax[0], ax[1], ax_Phys[0], ax_Phys[1]);
GUI_TOUCH_Calibrate(GUI_COORD_Y, ay[0], ay[1], ay_Phys[0], ay_Phys[1]);
{ /* calculate and display values for configuration file */
int x0, x1;
int y0, y1;
GUI_Clear();
_Calibrate(GUI_COORD_X, ax[0], ax[1], ax_Phys[0], ax_Phys[1], &x0, &x1);
_Calibrate(GUI_COORD_Y, ay[0], ay[1], ay_Phys[0], ay_Phys[1], &y0, &y1);
GUI_DispStringAt("x0: ", 0, 0); GUI_DispDec(x0, 4); GUI_DispNextLine();
GUI_DispString ("x1: "); GUI_DispDec(x1, 4); GUI_DispNextLine();
GUI_DispString ("y0: "); GUI_DispDec(y0, 4); GUI_DispNextLine();
GUI_DispString ("y1: "); GUI_DispDec(y1, 4); GUI_DispNextLine();
GUI_DispString ("Please touch display to continue...");
GUI_Delay(1000);
do {
GUI_PID_STATE State;
GUI_TOUCH_GetState(&State);
if (State.Pressed)
break;
GUI_Delay (10);
} while (1);
}
CalibrationComplete = 1;
}
void _ExecCalibration(void) {
int x,y;
uint16_t data[6];
uint16_t get_data[6];
int ax_Phys[2],ay_Phys[2];
/* calculate log. Positions */
int ax[2] = { 15, LCD_XSIZE -1-15};
// const int ay[2] = { 15, LCD_YSIZE-1-15};
int ay[2] = { LCD_YSIZE-1-15, 15};
GUI_TOUCH_SetDefaultCalibration();
/* _Calibrate upper left */
GUI_SetBkColor(GUI_RED);
GUI_Clear();
GUI_SetColor(GUI_WHITE); GUI_FillCircle(ax[0], ay[0], 10);
GUI_SetColor(GUI_RED); GUI_FillCircle(ax[0], ay[0], 5);
GUI_SetColor(GUI_WHITE);
GUI_DispStringAt("Press here", ax[0]+20, ay[0]);
do {
#if 0
GUI_PID_STATE State;
GUI_TOUCH_GetState(&State);
if (State.Pressed) {
#endif
#if 1
x = TPReadX();
y = TPReadY();
if ((x>=3700)&&(y>=3400)&&(x<3800)&&(y<3600)) {
#endif
ax_Phys[0] = GUI_TOUCH_GetxPhys();
ay_Phys[0] = GUI_TOUCH_GetyPhys();
break;
}
GUI_Delay (3000);
} while (1);
/* Tell user to release */
GUI_Clear();
GUI_DispStringAt("OK", ax[0]+20, ay[0]);
do {
GUI_PID_STATE State;
GUI_TOUCH_GetState(&State);
if (State.Pressed == 0) {
break;
}
GUI_Delay (100);
} while (1);
/* _Calibrate lower right */
GUI_SetBkColor(GUI_RED);
GUI_Clear();
GUI_SetColor(GUI_WHITE); GUI_FillCircle(ax[1], ay[1], 10);
GUI_SetColor(GUI_RED); GUI_FillCircle(ax[1], ay[1], 5);
GUI_SetColor(GUI_WHITE);
GUI_SetTextAlign(GUI_TA_RIGHT);
GUI_DispStringAt("Press here", ax[1]-20, ay[1]);
do {
#if 1
x = TPReadX();
y = TPReadY();
if ((y>450)&&(y<620)&&(x>350)&&(x<450)) {
#endif
#if 0
GUI_PID_STATE State;
GUI_TOUCH_GetState(&State);
if (State.Pressed) {
#endif
ax_Phys[1] = GUI_TOUCH_GetxPhys();
ay_Phys[1] = GUI_TOUCH_GetyPhys();
break;
}
GUI_Delay (3000);
} while (1);
GUI_TOUCH_Calibrate(GUI_COORD_X, ax[0], ax[1], ax_Phys[0], ax_Phys[1]);
GUI_TOUCH_Calibrate(GUI_COORD_Y, ay[0], ay[1], ay_Phys[0], ay_Phys[1]);
{ /* calculate and display values for configuration file */
int x0, x1;
int y0, y1;
GUI_Clear();
_Calibrate(GUI_COORD_X, ax[0], ax[1], ax_Phys[0], ax_Phys[1], &x0, &x1);
_Calibrate(GUI_COORD_Y, ay[0], ay[1], ay_Phys[0], ay_Phys[1], &y0, &y1);
GUI_DispStringAt("x0: ", 0, 0); GUI_DispDec(x0, 4); GUI_DispNextLine();
GUI_DispString ("x1: "); GUI_DispDec(x1, 4); GUI_DispNextLine();
GUI_DispString ("y0: "); GUI_DispDec(y0, 4); GUI_DispNextLine();
GUI_DispString ("y1: "); GUI_DispDec(y1, 4); GUI_DispNextLine();
GUI_DispString ("Please touch display to continue...");
GUI_Delay(1000);
data[0]= CAL_READY;
data[1]= ax_Phys[0];
data[2]= ay_Phys[0];
data[3]= ax_Phys[1];
data[4]= ay_Phys[1];
#if 1
save_calibrate_to_flash(data);
get_calibrate_data(get_data);
GUI_DispStringAt("x0: ", 100, 0); GUI_DispDec(get_data[1], 4); GUI_DispNextLine();
GUI_DispString ("x1: "); GUI_DispDec(get_data[2], 4); GUI_DispNextLine();
GUI_DispString ("y0: "); GUI_DispDec(get_data[3], 4); GUI_DispNextLine();
GUI_DispString ("y1: "); GUI_DispDec(get_data[4], 4); GUI_DispNextLine();
GUI_DispString ("state: "); GUI_DispDec(get_data[0], 4); GUI_DispNextLine();
#endif
do {
GUI_PID_STATE State;
GUI_TOUCH_GetState(&State);
if (State.Pressed)
break;
GUI_Delay (10);
} while (1);
}
}
int run_cal(void)
{
if(get_calibrate_state()== CAL_READY)
{
get_calibration();
}else{
#if 1
_ExecCalibration();
#endif
#if 0
Calibration();
#endif
}
}
int get_calibration(void)
{
uint16_t cal_data[5];
int ax_Phys[2],ay_Phys[2];
int ax[2] = { 15, LCD_XSIZE -1-15};
int ay[2] = { LCD_YSIZE-1-15, 15};
get_calibrate_data(cal_data);
ax_Phys[0] = cal_data[1];
ay_Phys[0] = cal_data[2];
ax_Phys[1] = cal_data[3];
ay_Phys[1] = cal_data[4];
GUI_TOUCH_Calibrate(GUI_COORD_X, ax[0], ax[1], ax_Phys[0], ax_Phys[1]);
GUI_TOUCH_Calibrate(GUI_COORD_Y, ay[0], ay[1], ay_Phys[0], ay_Phys[1]);
}
#if 0
void myAD2XY( int *adx , int *ady ){
float f_dat;
int dat1;
f_dat = (float)(*ady - admy)/(float)(*adx - admx);
if(f_dat>0){
if( *adx>admx && admk[2] >=f_dat) dat1 = 1;
else if( *adx>admx && admk[2] < f_dat ) dat1 =2;//2
else if( *adx<admx && admk[0] >=f_dat ) dat1 =0;
else if( *adx<admx && admk[0] < f_dat ) dat1 =3;//0
else{ dat1 =0; }//*adx =0;*ady =0; }
}else{
if( *adx>admx && admk[1] >=f_dat) dat1 = 0;
else if( *adx>admx && admk[1] < f_dat ) dat1 =1;//1
else if( *adx<admx && admk[3] >=f_dat ) dat1 =3;
else if( *adx<admx && admk[3] < f_dat ) dat1 =2;//3
else{ dat1 =0; }//*adx =0;*ady =0; }
}
*adx = (int)(Factors[dat1][0].a*(*adx)+Factors[dat1][0].b*(*ady)+Factors[dat1][0].c);
*ady = (int)(Factors[dat1][1].a*(*adx)+Factors[dat1][1].b*(*ady)+Factors[dat1][1].c);
}
/*********************************************************************
*
* MainTask
*/
void MainTask(void) {
GUI_Init();
GUI_DispString("Hello world!");
while(1);
}