DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::DIALOG_EDIT_COMPONENT_IN_SCHEMATIC( wxWindow* parent ) :
DIALOG_EDIT_COMPONENT_IN_SCHEMATIC_FBP( parent )
{
m_Parent = (SCH_EDIT_FRAME*) parent;
m_part = NULL;
m_skipCopyFromPanel = false;
wxListItem columnLabel;
columnLabel.SetImage( -1 );
columnLabel.SetText( _( "Name" ) );
fieldListCtrl->InsertColumn( 0, columnLabel );
columnLabel.SetText( _( "Value" ) );
fieldListCtrl->InsertColumn( 1, columnLabel );
m_staticTextUnitSize->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_staticTextUnitPosX->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_staticTextUnitPosY->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
copySelectedFieldToPanel();
wxToolTip::Enable( true );
GetSizer()->SetSizeHints( this );
Center();
stdDialogButtonSizerOK->SetDefault();
}
DIALOG_MOVE_EXACT::DIALOG_MOVE_EXACT( PCB_BASE_FRAME* aParent,
wxPoint& translation, double& rotation ):
DIALOG_MOVE_EXACT_BASE( aParent ),
m_translation( translation ),
m_rotation( rotation )
{
// set the unit labels
m_xUnit->SetLabelText( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_yUnit->SetLabelText( GetAbbreviatedUnitsLabel( g_UserUnit ) );
// tabbing goes through the entries in sequence
m_yEntry->MoveAfterInTabOrder( m_xEntry );
m_rotEntry->MoveAfterInTabOrder( m_yEntry );
// and set up the entries according to the saved options
m_polarCoords->SetValue( m_options.polarCoords );
m_xEntry->SetValue( wxString::FromDouble( m_options.entry1 ) );
m_yEntry->SetValue( wxString::FromDouble( m_options.entry2 ) );
m_rotEntry->SetValue( wxString::FromDouble( m_options.entryRotation ) );
updateDlgTexts( m_polarCoords->IsChecked() );
m_stdButtonsOK->SetDefault();
GetSizer()->SetSizeHints(this);
}
void DIALOG_DRC_CONTROL::DisplayDRCValues()
{
m_TrackMinWidthUnit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_ViaMinUnit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_MicroViaMinUnit->SetLabel(GetAbbreviatedUnitsLabel( g_UserUnit ) );
PutValueInLocalUnits( *m_SetTrackMinWidthCtrl, m_BrdSettings.m_TrackMinWidth );
PutValueInLocalUnits( *m_SetViaMinSizeCtrl, m_BrdSettings.m_ViasMinSize );
PutValueInLocalUnits( *m_SetMicroViakMinSizeCtrl, m_BrdSettings.m_MicroViasMinSize );
}
void DIALOG_MOVE_EXACT::updateDlgTexts( bool aPolar )
{
if( aPolar )
{
m_xLabel->SetLabelText( _( "Distance:" ) ); // Polar radius
m_yLabel->SetLabelText( _( "Angle:" ) ); // Polar theta or angle
m_yUnit->SetLabelText( GetAbbreviatedUnitsLabel( DEGREES ) );
}
else
{
m_xLabel->SetLabelText( _( "Move vector X:" ) );
m_yLabel->SetLabelText( _( "Move vector Y:" ) );
m_yUnit->SetLabelText( GetAbbreviatedUnitsLabel( g_UserUnit ) );
}
}
wxString PANEL_PREV_3D::formatOffsetValue( double aValue )
{
// Convert from internal units (mm) to user units
if( m_userUnits == INCHES )
aValue /= 25.4f;
return wxString::Format( "%.4f %s", aValue, GetAbbreviatedUnitsLabel( m_userUnits ) );
}
void DIALOG_EDIT_LIBENTRY_FIELDS_IN_LIB::OnInitDialog( wxInitDialogEvent& event )
{
m_skipCopyFromPanel = false;
wxListItem columnLabel;
columnLabel.SetImage( -1 );
columnLabel.SetText( _( "Name" ) );
fieldListCtrl->InsertColumn( COLUMN_FIELD_NAME, columnLabel );
columnLabel.SetText( _( "Value" ) );
fieldListCtrl->InsertColumn( COLUMN_TEXT, columnLabel );
m_staticTextUnitSize->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_staticTextUnitPosX->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_staticTextUnitPosY->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
initBuffers();
copySelectedFieldToPanel();
stdDialogButtonSizerOK->SetDefault();
}
void SCH_EDIT_FRAME::OnFindDrcMarker( wxFindDialogEvent& event )
{
static SCH_MARKER* lastMarker = NULL;
wxString msg;
SCH_SHEET_LIST schematic;
SCH_SHEET_PATH* sheetFoundIn = NULL;
bool wrap = ( event.GetFlags() & FR_SEARCH_WRAP ) != 0;
wxRect clientRect( wxPoint( 0, 0 ), GetClientSize() );
bool warpCursor = ( ( event.GetId() == wxEVT_COMMAND_FIND_CLOSE ) ||
!( event.GetFlags() & FR_NO_WARP_CURSOR ) );
if( event.GetFlags() & FR_CURRENT_SHEET_ONLY )
{
sheetFoundIn = m_CurrentSheet;
lastMarker = (SCH_MARKER*) m_CurrentSheet->FindNextItem( SCH_MARKER_T, lastMarker, wrap );
}
else
{
lastMarker = (SCH_MARKER*) schematic.FindNextItem( SCH_MARKER_T, &sheetFoundIn,
lastMarker, wrap );
}
if( lastMarker != NULL )
{
if( *sheetFoundIn != *m_CurrentSheet )
{
sheetFoundIn->LastScreen()->SetZoom( GetScreen()->GetZoom() );
*m_CurrentSheet = *sheetFoundIn;
m_CurrentSheet->UpdateAllScreenReferences();
}
sheetFoundIn->LastScreen()->SetCrossHairPosition( lastMarker->GetPosition() );
RedrawScreen( lastMarker->GetPosition(), warpCursor );
wxString path = sheetFoundIn->Path();
wxString units = GetAbbreviatedUnitsLabel();
double x = To_User_Unit( g_UserUnit, (double) lastMarker->GetPosition().x,
m_internalUnits );
double y = To_User_Unit( g_UserUnit, (double) lastMarker->GetPosition().y,
m_internalUnits );
msg.Printf( _( "Design rule check marker found in sheet %s at %0.3f%s, %0.3f%s" ),
GetChars( path ), x, GetChars( units ), y, GetChars( units) );
SetStatusText( msg );
}
else
{
SetStatusText( _( "No more markers were found." ) );
}
}
void DIALOG_GLOBAL_MODULES_FIELDS_EDITION::initDialog()
{
m_sdbSizerButtonsOK->SetDefault();
m_brdSettings = &m_parent->GetDesignSettings();
m_ReferenceOpt->SetValue(m_refSelection),
m_ValueOpt->SetValue(m_valueSelection),
m_OtherFields->SetValue(m_othersSelection);
m_ModuleFilter->SetValue(m_filterString);
m_SizeXunit->SetLabel( GetAbbreviatedUnitsLabel() );
m_SizeYunit->SetLabel( GetAbbreviatedUnitsLabel() );
m_ThicknessUnit->SetLabel( GetAbbreviatedUnitsLabel() );
m_SizeX_Value->SetValue(
StringFromValue( g_UserUnit, m_brdSettings->m_ModuleTextSize.x ) );
m_SizeY_Value->SetValue(
StringFromValue( g_UserUnit, m_brdSettings->m_ModuleTextSize.y ) );
m_ThicknessValue->SetValue(
StringFromValue( g_UserUnit, m_brdSettings->m_ModuleTextWidth) );
Layout();
GetSizer()->SetSizeHints( this );
Centre();
}
// Creation of the panel properties of the module editor.
void DIALOG_MODULE_BOARD_EDITOR::InitBoardProperties()
{
PutValueInLocalUnits( *m_ModPositionX, m_CurrentModule->GetPosition().x );
m_XPosUnit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
PutValueInLocalUnits( *m_ModPositionY, m_CurrentModule->GetPosition().y );
m_YPosUnit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_LayerCtrl->SetSelection(
(m_CurrentModule->GetLayer() == LAYER_N_BACK) ? 1 : 0 );
bool select = false;
switch( int( m_CurrentModule->GetOrientation() ) )
{
case 0:
m_OrientCtrl->SetSelection( 0 );
break;
case 900:
case -2700:
m_OrientCtrl->SetSelection( 1 );
break;
case -900:
case 2700:
m_OrientCtrl->SetSelection( 2 );
break;
case -1800:
case 1800:
m_OrientCtrl->SetSelection( 3 );
break;
default:
m_OrientCtrl->SetSelection( 4 );
select = true;
break;
}
wxString msg;
msg << m_CurrentModule->GetOrientation();
m_OrientValue->SetValue( msg );
m_OrientValue->Enable( select );
// Initialize dialog relative to masks clearances
m_NetClearanceUnits->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_SolderMaskMarginUnits->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_SolderPasteMarginUnits->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
PutValueInLocalUnits( *m_NetClearanceValueCtrl, m_CurrentModule->GetLocalClearance() );
PutValueInLocalUnits( *m_SolderMaskMarginCtrl, m_CurrentModule->GetLocalSolderMaskMargin() );
// These 2 parameters are usually < 0, so prepare entering a negative
// value, if current is 0
PutValueInLocalUnits( *m_SolderPasteMarginCtrl, m_CurrentModule->GetLocalSolderPasteMargin() );
if( m_CurrentModule->GetLocalSolderPasteMargin() == 0 )
m_SolderPasteMarginCtrl->SetValue( wxT( "-" ) +
m_SolderPasteMarginCtrl->GetValue() );
// Add solder paste margin ration in per cent
// for the usual default value 0.0, display -0.0 (or -0,0 in some countries)
msg.Printf( wxT( "%f" ),
m_CurrentModule->GetLocalSolderPasteMarginRatio() * 100.0 );
if( m_CurrentModule->GetLocalSolderPasteMarginRatio() == 0.0 &&
msg[0] == '0') // Sometimes Printf adds a sign if the value is very small (0.0)
m_SolderPasteMarginRatioCtrl->SetValue( wxT("-") + msg );
else
m_SolderPasteMarginRatioCtrl->SetValue( msg );
switch( m_CurrentModule->GetZoneConnection() )
{
default:
case UNDEFINED_CONNECTION:
m_ZoneConnectionChoice->SetSelection( 0 );
break;
case PAD_IN_ZONE:
m_ZoneConnectionChoice->SetSelection( 1 );
break;
case THERMAL_PAD:
m_ZoneConnectionChoice->SetSelection( 2 );
break;
case PAD_NOT_IN_ZONE:
m_ZoneConnectionChoice->SetSelection( 3 );
break;
}
}
void DIALOG_PAD_PROPERTIES::initValues()
{
wxString msg;
double angle;
// Disable pad net name wxTextCtrl if the caller is the footprint editor
// because nets are living only in the board managed by the board editor
m_canEditNetName = m_parent->IsType( FRAME_PCB );
// Setup layers names from board
// Should be made first, before calling m_rbCopperLayersSel->SetSelection()
m_rbCopperLayersSel->SetString( 0, m_board->GetLayerName( F_Cu ) );
m_rbCopperLayersSel->SetString( 1, m_board->GetLayerName( B_Cu ) );
m_PadLayerAdhCmp->SetLabel( m_board->GetLayerName( F_Adhes ) );
m_PadLayerAdhCu->SetLabel( m_board->GetLayerName( B_Adhes ) );
m_PadLayerPateCmp->SetLabel( m_board->GetLayerName( F_Paste ) );
m_PadLayerPateCu->SetLabel( m_board->GetLayerName( B_Paste ) );
m_PadLayerSilkCmp->SetLabel( m_board->GetLayerName( F_SilkS ) );
m_PadLayerSilkCu->SetLabel( m_board->GetLayerName( B_SilkS ) );
m_PadLayerMaskCmp->SetLabel( m_board->GetLayerName( F_Mask ) );
m_PadLayerMaskCu->SetLabel( m_board->GetLayerName( B_Mask ) );
m_PadLayerECO1->SetLabel( m_board->GetLayerName( Eco1_User ) );
m_PadLayerECO2->SetLabel( m_board->GetLayerName( Eco2_User ) );
m_PadLayerDraft->SetLabel( m_board->GetLayerName( Dwgs_User ) );
m_isFlipped = false;
if( m_currentPad )
{
MODULE* footprint = m_currentPad->GetParent();
m_isFlipped = m_currentPad->IsFlipped();
if( m_isFlipped )
m_staticModuleSideValue->SetLabel( _( "Back side (footprint is mirrored)" ) );
// Diplay footprint rotation ( angles are in 0.1 degree )
msg.Printf( wxT( "%.1f" ), footprint->GetOrientation() / 10.0 );
m_staticModuleRotValue->SetLabel( msg );
}
if( m_isFlipped )
{
wxPoint pt = m_dummyPad->GetOffset();
pt.y = -pt.y;
m_dummyPad->SetOffset( pt );
wxSize sz = m_dummyPad->GetDelta();
sz.y = -sz.y;
m_dummyPad->SetDelta( sz );
// flip pad's layers
m_dummyPad->SetLayerSet( FlipLayerMask( m_dummyPad->GetLayerSet() ) );
}
m_staticTextWarningPadFlipped->Show(m_isFlipped);
m_PadNumCtrl->SetValue( m_dummyPad->GetPadName() );
m_PadNetNameCtrl->SetValue( m_dummyPad->GetNetname() );
// Set the unit name in dialog:
wxStaticText* unitTexts[] =
{
m_PadPosX_Unit, m_PadPosY_Unit,
m_PadDrill_X_Unit, m_PadDrill_Y_Unit,
m_PadShapeSizeX_Unit, m_PadShapeSizeY_Unit,
m_PadShapeOffsetX_Unit,m_PadShapeOffsetY_Unit,
m_PadShapeDelta_Unit, m_PadLengthDie_Unit,
m_NetClearanceUnits, m_SolderMaskMarginUnits, m_SolderPasteMarginUnits,
m_ThermalWidthUnits, m_ThermalGapUnits, m_staticTextCornerSizeUnit
};
for( unsigned ii = 0; ii < DIM( unitTexts ); ++ii )
unitTexts[ii]->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
// Display current pad parameters units:
PutValueInLocalUnits( *m_PadPosition_X_Ctrl, m_dummyPad->GetPosition().x );
PutValueInLocalUnits( *m_PadPosition_Y_Ctrl, m_dummyPad->GetPosition().y );
PutValueInLocalUnits( *m_PadDrill_X_Ctrl, m_dummyPad->GetDrillSize().x );
PutValueInLocalUnits( *m_PadDrill_Y_Ctrl, m_dummyPad->GetDrillSize().y );
PutValueInLocalUnits( *m_ShapeSize_X_Ctrl, m_dummyPad->GetSize().x );
PutValueInLocalUnits( *m_ShapeSize_Y_Ctrl, m_dummyPad->GetSize().y );
PutValueInLocalUnits( *m_ShapeOffset_X_Ctrl, m_dummyPad->GetOffset().x );
PutValueInLocalUnits( *m_ShapeOffset_Y_Ctrl, m_dummyPad->GetOffset().y );
if( m_dummyPad->GetDelta().x )
{
PutValueInLocalUnits( *m_ShapeDelta_Ctrl, m_dummyPad->GetDelta().x );
m_trapDeltaDirChoice->SetSelection( 0 );
}
else
{
PutValueInLocalUnits( *m_ShapeDelta_Ctrl, m_dummyPad->GetDelta().y );
m_trapDeltaDirChoice->SetSelection( 1 );
}
PutValueInLocalUnits( *m_LengthPadToDieCtrl, m_dummyPad->GetPadToDieLength() );
PutValueInLocalUnits( *m_NetClearanceValueCtrl, m_dummyPad->GetLocalClearance() );
PutValueInLocalUnits( *m_SolderMaskMarginCtrl, m_dummyPad->GetLocalSolderMaskMargin() );
PutValueInLocalUnits( *m_ThermalWidthCtrl, m_dummyPad->GetThermalWidth() );
PutValueInLocalUnits( *m_ThermalGapCtrl, m_dummyPad->GetThermalGap() );
// These 2 parameters are usually < 0, so prepare entering a negative value, if current is 0
PutValueInLocalUnits( *m_SolderPasteMarginCtrl, m_dummyPad->GetLocalSolderPasteMargin() );
if( m_dummyPad->GetLocalSolderPasteMargin() == 0 )
m_SolderPasteMarginCtrl->SetValue( wxT( "-" ) + m_SolderPasteMarginCtrl->GetValue() );
msg.Printf( wxT( "%f" ), m_dummyPad->GetLocalSolderPasteMarginRatio() * 100.0 );
if( m_dummyPad->GetLocalSolderPasteMarginRatio() == 0.0 && msg[0] == '0' )
// Sometimes Printf adds a sign if the value is small
m_SolderPasteMarginRatioCtrl->SetValue( wxT( "-" ) + msg );
else
m_SolderPasteMarginRatioCtrl->SetValue( msg );
switch( m_dummyPad->GetZoneConnection() )
{
default:
case PAD_ZONE_CONN_INHERITED:
m_ZoneConnectionChoice->SetSelection( 0 );
break;
case PAD_ZONE_CONN_FULL:
m_ZoneConnectionChoice->SetSelection( 1 );
break;
case PAD_ZONE_CONN_THERMAL:
m_ZoneConnectionChoice->SetSelection( 2 );
break;
case PAD_ZONE_CONN_NONE:
m_ZoneConnectionChoice->SetSelection( 3 );
break;
}
if( m_currentPad )
{
MODULE* footprint = m_currentPad->GetParent();
angle = m_currentPad->GetOrientation() - footprint->GetOrientation();
if( m_isFlipped )
angle = -angle;
m_dummyPad->SetOrientation( angle );
}
angle = m_dummyPad->GetOrientation();
NORMALIZE_ANGLE_180( angle ); // ? normalizing is in D_PAD::SetOrientation()
// Set layers used by this pad: :
setPadLayersList( m_dummyPad->GetLayerSet() );
// Pad Orient
switch( int( angle ) )
{
case 0:
m_PadOrient->SetSelection( 0 );
break;
case 900:
m_PadOrient->SetSelection( 1 );
break;
case -900:
m_PadOrient->SetSelection( 2 );
break;
case 1800:
case -1800:
m_PadOrient->SetSelection( 3 );
break;
default:
m_PadOrient->SetSelection( 4 );
break;
}
switch( m_dummyPad->GetShape() )
{
default:
case PAD_SHAPE_CIRCLE:
m_PadShape->SetSelection( CHOICE_SHAPE_CIRCLE );
break;
case PAD_SHAPE_OVAL:
m_PadShape->SetSelection( CHOICE_SHAPE_OVAL );
break;
case PAD_SHAPE_RECT:
m_PadShape->SetSelection( CHOICE_SHAPE_RECT );
break;
case PAD_SHAPE_TRAPEZOID:
m_PadShape->SetSelection( CHOICE_SHAPE_TRAPEZOID );
break;
case PAD_SHAPE_ROUNDRECT:
m_PadShape->SetSelection( CHOICE_SHAPE_ROUNDRECT );
break;
}
m_OrientValue = angle / 10.0;
// Type of pad selection
m_PadType->SetSelection( 0 );
for( unsigned ii = 0; ii < DIM( code_type ); ii++ )
{
if( code_type[ii] == m_dummyPad->GetAttribute() )
{
m_PadType->SetSelection( ii );
break;
}
}
// Enable/disable Pad name,and pad length die
// (disable for NPTH pads (mechanical pads)
bool enable = m_dummyPad->GetAttribute() != PAD_ATTRIB_HOLE_NOT_PLATED;
m_PadNumCtrl->Enable( enable );
m_PadNetNameCtrl->Enable( m_canEditNetName && enable && m_currentPad != NULL );
m_LengthPadToDieCtrl->Enable( enable );
if( m_dummyPad->GetDrillShape() != PAD_DRILL_SHAPE_OBLONG )
m_DrillShapeCtrl->SetSelection( 0 );
else
m_DrillShapeCtrl->SetSelection( 1 );
// Update some dialog widgets state (Enable/disable options):
wxCommandEvent cmd_event;
setPadLayersList( m_dummyPad->GetLayerSet() );
OnDrillShapeSelected( cmd_event );
OnPadShapeSelection( cmd_event );
updateRoundRectCornerValues();
}
DIALOG_TRACK_VIA_PROPERTIES::DIALOG_TRACK_VIA_PROPERTIES( PCB_BASE_FRAME* aParent,
const SELECTION& aItems,
COMMIT& aCommit ) :
DIALOG_TRACK_VIA_PROPERTIES_BASE( aParent ),
m_frame( aParent ),
m_items( aItems ),
m_commit( aCommit ),
m_trackStartX( aParent, m_TrackStartXLabel, m_TrackStartXCtrl, m_TrackStartXUnit ),
m_trackStartY( aParent, m_TrackStartYLabel, m_TrackStartYCtrl, m_TrackStartYUnit ),
m_trackEndX( aParent, m_TrackEndXLabel, m_TrackEndXCtrl, m_TrackEndXUnit ),
m_trackEndY( aParent, m_TrackEndYLabel, m_TrackEndYCtrl, m_TrackEndYUnit ),
m_trackWidth( aParent, m_TrackWidthLabel, m_TrackWidthCtrl, m_TrackWidthUnit, true ),
m_viaX( aParent, m_ViaXLabel, m_ViaXCtrl, m_ViaXUnit ),
m_viaY( aParent, m_ViaYLabel, m_ViaYCtrl, m_ViaYUnit ),
m_viaDiameter( aParent, m_ViaDiameterLabel, m_ViaDiameterCtrl, m_ViaDiameterUnit, true ),
m_viaDrill( aParent, m_ViaDrillLabel, m_ViaDrillCtrl, m_ViaDrillUnit, true ),
m_tracks( false ),
m_vias( false )
{
wxASSERT( !m_items.Empty() );
VIATYPE_T viaType = VIA_NOT_DEFINED;
m_netSelector->SetNetInfo( &aParent->GetBoard()->GetNetInfo() );
m_TrackLayerCtrl->SetLayersHotkeys( false );
m_TrackLayerCtrl->SetNotAllowedLayerSet( LSET::AllNonCuMask() );
m_TrackLayerCtrl->SetBoardFrame( aParent );
m_TrackLayerCtrl->Resync();
m_ViaStartLayer->SetLayersHotkeys( false );
m_ViaStartLayer->SetNotAllowedLayerSet( LSET::AllNonCuMask() );
m_ViaStartLayer->SetBoardFrame( aParent );
m_ViaStartLayer->Resync();
m_ViaEndLayer->SetLayersHotkeys( false );
m_ViaEndLayer->SetNotAllowedLayerSet( LSET::AllNonCuMask() );
m_ViaEndLayer->SetBoardFrame( aParent );
m_ViaEndLayer->Resync();
bool nets = false;
int net = 0;
bool hasLocked = false;
bool hasUnlocked = false;
// Look for values that are common for every item that is selected
for( auto& item : m_items )
{
if( !nets )
{
net = static_cast<BOARD_CONNECTED_ITEM*>( item )->GetNetCode();
nets = true;
}
else if( net != static_cast<BOARD_CONNECTED_ITEM*>( item )->GetNetCode() )
{
net = -1;
}
switch( item->Type() )
{
case PCB_TRACE_T:
{
const TRACK* t = static_cast<const TRACK*>( item );
if( !m_tracks ) // first track in the list
{
m_trackStartX.SetValue( t->GetStart().x );
m_trackStartY.SetValue( t->GetStart().y );
m_trackEndX.SetValue( t->GetEnd().x );
m_trackEndY.SetValue( t->GetEnd().y );
m_trackWidth.SetValue( t->GetWidth() );
m_TrackLayerCtrl->SetLayerSelection( t->GetLayer() );
m_tracks = true;
}
else // check if values are the same for every selected track
{
if( m_trackStartX.GetValue() != t->GetStart().x )
m_trackStartX.SetValue( INDETERMINATE );
if( m_trackStartY.GetValue() != t->GetStart().y )
m_trackStartY.SetValue( INDETERMINATE );
if( m_trackEndX.GetValue() != t->GetEnd().x )
m_trackEndX.SetValue( INDETERMINATE );
if( m_trackEndY.GetValue() != t->GetEnd().y )
m_trackEndY.SetValue( INDETERMINATE );
if( m_trackWidth.GetValue() != t->GetWidth() )
m_trackWidth.SetValue( INDETERMINATE );
if( m_TrackLayerCtrl->GetLayerSelection() != t->GetLayer() )
m_TrackLayerCtrl->SetLayerSelection( UNDEFINED_LAYER );
}
if( t->IsLocked() )
hasLocked = true;
else
hasUnlocked = true;
break;
}
case PCB_VIA_T:
{
const VIA* v = static_cast<const VIA*>( item );
if( !m_vias ) // first via in the list
{
m_viaX.SetValue( v->GetPosition().x );
m_viaY.SetValue( v->GetPosition().y );
m_viaDiameter.SetValue( v->GetWidth() );
m_viaDrill.SetValue( v->GetDrillValue() );
m_vias = true;
viaType = v->GetViaType();
m_ViaStartLayer->SetLayerSelection( v->TopLayer() );
m_ViaEndLayer->SetLayerSelection( v->BottomLayer() );
}
else // check if values are the same for every selected via
{
if( m_viaX.GetValue() != v->GetPosition().x )
m_viaX.SetValue( INDETERMINATE );
if( m_viaY.GetValue() != v->GetPosition().y )
m_viaY.SetValue( INDETERMINATE );
if( m_viaDiameter.GetValue() != v->GetWidth() )
m_viaDiameter.SetValue( INDETERMINATE );
if( m_viaDrill.GetValue() != v->GetDrillValue() )
m_viaDrill.SetValue( INDETERMINATE );
if( viaType != v->GetViaType() )
viaType = VIA_NOT_DEFINED;
if( m_ViaStartLayer->GetLayerSelection() != v->TopLayer() )
m_ViaStartLayer->SetLayerSelection( UNDEFINED_LAYER );
if( m_ViaEndLayer->GetLayerSelection() != v->BottomLayer() )
m_ViaEndLayer->SetLayerSelection( UNDEFINED_LAYER );
}
if( v->IsLocked() )
hasLocked = true;
else
hasUnlocked = true;
break;
}
default:
{
wxASSERT( false );
break;
}
}
}
if ( net >= 0 )
m_netSelector->SetSelectedNetcode( net );
else
m_netSelector->SetIndeterminate();
wxASSERT( m_tracks || m_vias );
if( m_vias )
{
m_DesignRuleViasUnit->SetLabel( GetAbbreviatedUnitsLabel( m_units, true ) );
int viaSelection = wxNOT_FOUND;
for( unsigned ii = 0; ii < aParent->GetDesignSettings().m_ViasDimensionsList.size(); ii++ )
{
VIA_DIMENSION* viaDimension = &aParent->GetDesignSettings().m_ViasDimensionsList[ii];
wxString msg = StringFromValue( m_units, viaDimension->m_Diameter, false, true )
+ " / " + StringFromValue( m_units, viaDimension->m_Drill, false, true );
m_DesignRuleViasCtrl->Append( msg, viaDimension );
if( viaSelection == wxNOT_FOUND
&& m_viaDiameter.GetValue() == viaDimension->m_Diameter
&& m_viaDrill.GetValue() == viaDimension->m_Drill )
{
viaSelection = ii;
}
}
m_DesignRuleViasCtrl->SetSelection( viaSelection );
m_DesignRuleViasCtrl->Connect( wxEVT_CHOICE, wxCommandEventHandler( DIALOG_TRACK_VIA_PROPERTIES::onViaSelect ), NULL, this );
m_ViaDiameterCtrl->Connect( wxEVT_TEXT, wxCommandEventHandler( DIALOG_TRACK_VIA_PROPERTIES::onViaEdit ), NULL, this );
m_ViaDrillCtrl->Connect( wxEVT_TEXT, wxCommandEventHandler( DIALOG_TRACK_VIA_PROPERTIES::onViaEdit ), NULL, this );
m_ViaTypeChoice->Connect( wxEVT_CHOICE, wxCommandEventHandler( DIALOG_TRACK_VIA_PROPERTIES::onViaEdit ), NULL, this );
SetInitialFocus( m_ViaDiameterCtrl );
m_ViaTypeChoice->Enable();
switch( viaType )
{
case VIA_THROUGH: m_ViaTypeChoice->SetSelection( 0 ); break;
case VIA_MICROVIA: m_ViaTypeChoice->SetSelection( 1 ); break;
case VIA_BLIND_BURIED: m_ViaTypeChoice->SetSelection( 2 ); break;
case VIA_NOT_DEFINED: m_ViaTypeChoice->SetSelection( 3 ); break;
}
m_ViaStartLayer->Enable( viaType != VIA_THROUGH );
m_ViaEndLayer->Enable( viaType != VIA_THROUGH );
}
else
{
m_MainSizer->Hide( m_sbViaSizer, true );
}
if( m_tracks )
{
m_DesignRuleWidthsUnits->SetLabel( GetAbbreviatedUnitsLabel( m_units, true ) );
int widthSelection = wxNOT_FOUND;
for( unsigned ii = 0; ii < aParent->GetDesignSettings().m_TrackWidthList.size(); ii++ )
{
int width = aParent->GetDesignSettings().m_TrackWidthList[ii];
wxString msg = StringFromValue( m_units, width, false, true );
m_DesignRuleWidthsCtrl->Append( msg );
if( widthSelection == wxNOT_FOUND && m_trackWidth.GetValue() == width )
widthSelection = ii;
}
m_DesignRuleWidthsCtrl->SetSelection( widthSelection );
m_DesignRuleWidthsCtrl->Connect( wxEVT_CHOICE, wxCommandEventHandler( DIALOG_TRACK_VIA_PROPERTIES::onWidthSelect ), NULL, this );
m_TrackWidthCtrl->Connect( wxEVT_TEXT, wxCommandEventHandler( DIALOG_TRACK_VIA_PROPERTIES::onWidthEdit ), NULL, this );
SetInitialFocus( m_TrackWidthCtrl );
}
else
{
m_MainSizer->Hide( m_sbTrackSizer, true );
}
if( hasLocked && hasUnlocked )
m_lockedCbox->Set3StateValue( wxCHK_UNDETERMINED );
else if( hasLocked )
m_lockedCbox->Set3StateValue( wxCHK_CHECKED );
else
m_lockedCbox->Set3StateValue( wxCHK_UNCHECKED );
SetInitialFocus( m_tracks ? m_TrackStartXCtrl : m_ViaXCtrl );
m_StdButtonsOK->SetDefault();
// Now all widgets have the size fixed, call FinishDialogSettings
FinishDialogSettings();
}
DIALOG_CREATE_ARRAY::DIALOG_CREATE_ARRAY( PCB_BASE_FRAME* aParent, wxPoint aOrigPos,
ARRAY_OPTIONS** aSettings ) :
DIALOG_CREATE_ARRAY_BASE( aParent ),
CONFIG_SAVE_RESTORE_WINDOW( m_options.m_optionsSet ),
m_settings( aSettings ),
m_originalItemPosition( aOrigPos )
{
// Set up numbering scheme drop downs
//
// character set
// NOTE: do not change the order of this relative to the ARRAY_NUMBERING_TYPE_T enum
const wxString charSetDescriptions[] =
{
_( "Numerals (0,1,2,...,9,10)" ),
_( "Hexadecimal (0,1,...,F,10,...)" ),
_( "Alphabet, minus IOSQXZ" ),
_( "Alphabet, full 26 characters" )
};
m_choicePriAxisNumbering->Set( DIM( charSetDescriptions ), charSetDescriptions );
m_choiceSecAxisNumbering->Set( DIM( charSetDescriptions ), charSetDescriptions );
m_choiceCircNumberingType->Set( DIM( charSetDescriptions ), charSetDescriptions );;
m_choicePriAxisNumbering->SetSelection( 0 );
m_choiceSecAxisNumbering->SetSelection( 0 );
m_choiceCircNumberingType->SetSelection( 0 );
Add( m_entryNx, m_options.m_gridNx );
Add( m_entryNy, m_options.m_gridNy );
Add( m_entryDx, m_options.m_gridDx );
Add( m_entryDy, m_options.m_gridDy );
Add( m_entryOffsetX, m_options.m_gridOffsetX );
Add( m_entryOffsetY, m_options.m_gridOffsetY );
Add( m_entryStagger, m_options.m_gridStagger );
Add( m_radioBoxGridStaggerType, m_options.m_gridStaggerType );
Add( m_radioBoxGridNumberingAxis, m_options.m_gridNumberingAxis );
Add( m_checkBoxGridReverseNumbering, m_options.m_gridNumberingReverseAlternate );
Add( m_entryCentreX, m_options.m_circCentreX );
Add( m_entryCentreY, m_options.m_circCentreY );
Add( m_entryCircAngle, m_options.m_circAngle );
Add( m_entryCircCount, m_options.m_circCount );
Add( m_entryRotateItemsCb, m_options.m_circRotate );
Add( m_entryCircNumberingStart, m_options.m_circNumberingOffset );
Add( m_gridTypeNotebook, m_options.m_arrayTypeTab );
Add( m_radioBoxGridNumberingScheme, m_options.m_grid2dArrayNumbering );
Add( m_choicePriAxisNumbering, m_options.m_gridPriAxisNumScheme );
Add( m_choiceSecAxisNumbering, m_options.m_gridSecAxisNumScheme );
Add( m_entryGridPriNumberingOffset, m_options.m_gridPriNumberingOffset );
Add( m_entryGridSecNumberingOffset, m_options.m_gridSecNumberingOffset );
RestoreConfigToControls();
// Load units into labels
{
const wxString lengthUnit = GetAbbreviatedUnitsLabel( g_UserUnit );
m_unitLabelCentreX->SetLabelText( lengthUnit );
m_unitLabelCentreY->SetLabelText( lengthUnit );
m_unitLabelDx->SetLabelText( lengthUnit );
m_unitLabelDy->SetLabelText( lengthUnit );
m_unitLabelOffsetX->SetLabelText( lengthUnit );
m_unitLabelOffsetY->SetLabelText( lengthUnit );
}
// Run the callbacks once to process the dialog contents
setControlEnablement();
calculateCircularArrayProperties();
Fit();
}
void DIALOG_MODEDIT_FP_BODY_ITEM_PROPERTIES::initDlg()
/* Initialize messages and values in text control,
* according to the item parameters values
*/
{
SetFocus();
m_StandardButtonsSizerOK->SetDefault();
// Set unit symbol
wxStaticText * texts_unit[] =
{
m_StartPointXUnit,
m_StartPointYUnit,
m_EndPointXUnit,
m_EndPointYUnit,
m_ThicknessTextUnit,
m_DefaulThicknessTextUnit,
NULL
};
for( int ii = 0; ; ii++ )
{
if( texts_unit[ii] == NULL )
break;
texts_unit[ii]->SetLabel( GetAbbreviatedUnitsLabel() );
}
wxString msg;
// Change texts according to the segment shape:
switch ( m_item->GetShape() )
{
case S_CIRCLE:
m_StartPointXLabel->SetLabel(_("Center X"));
m_StartPointYLabel->SetLabel(_("Center Y"));
m_EndPointXLabel->SetLabel(_("Point X"));
m_EndPointYLabel->SetLabel(_("Point Y"));
m_Angle_Text->Show(false);
m_Angle_Ctrl->Show(false);
m_AngleUnit->Show(false);
break;
case S_ARC:
m_StartPointXLabel->SetLabel(_("Center X"));
m_StartPointYLabel->SetLabel(_("Center Y"));
m_EndPointXLabel->SetLabel(_("Start Point X"));
m_EndPointYLabel->SetLabel(_("Start Point Y"));
// Here the angle is a double, but the UI is still working
// with integers
msg << int( m_item->GetAngle() );
m_Angle_Ctrl->SetValue(msg);
break;
default:
m_Angle_Text->Show(false);
m_Angle_Ctrl->Show(false);
m_AngleUnit->Show(false);
break;
}
PutValueInLocalUnits( *m_Center_StartXCtrl, m_item->GetStart().x );
PutValueInLocalUnits( *m_Center_StartYCtrl, m_item->GetStart().y );
PutValueInLocalUnits( *m_EndX_Radius_Ctrl, m_item->GetEnd().x );
PutValueInLocalUnits( *m_EndY_Ctrl, m_item->GetEnd().y );
PutValueInLocalUnits( *m_ThicknessCtrl, m_item->GetWidth() );
PutValueInLocalUnits( *m_DefaultThicknessCtrl, m_brdSettings.m_ModuleSegmentWidth );
// Configure the layers list selector
m_LayerSelectionCtrl->SetLayersHotkeys( false );
m_LayerSelectionCtrl->SetLayerMask( INTERNAL_CU_LAYERS|EDGE_LAYER );
m_LayerSelectionCtrl->SetBoardFrame( m_parent );
m_LayerSelectionCtrl->Resync();
if( m_LayerSelectionCtrl->SetLayerSelection( m_item->GetLayer() ) < 0 )
{
wxMessageBox( _("This item has an illegal layer id.\n"
"Now, forced on the front silk screen layer. Please, fix it") );
m_LayerSelectionCtrl->SetLayerSelection( SILKSCREEN_N_FRONT );
}
}
void DIALOG_GRAPHIC_ITEM_PROPERTIES::initDlg( )
/**************************************************************************/
/* Initialize messages and values in text control,
* according to the item parameters values
*/
{
SetFocus();
m_StandardButtonsSizerOK->SetDefault();
// Set unit symbol
wxStaticText * texts_unit[] =
{
m_StartPointXUnit,
m_StartPointYUnit,
m_EndPointXUnit,
m_EndPointYUnit,
m_ThicknessTextUnit,
m_DefaulThicknessTextUnit,
NULL
};
for( int ii = 0; ; ii++ )
{
if( texts_unit[ii] == NULL )
break;
texts_unit[ii]->SetLabel( GetAbbreviatedUnitsLabel() );
}
wxString msg;
// Change texts according to the segment shape:
switch ( m_Item->GetShape() )
{
case S_CIRCLE:
m_StartPointXLabel->SetLabel(_("Center X"));
m_StartPointYLabel->SetLabel(_("Center Y"));
m_EndPointXLabel->SetLabel(_("Point X"));
m_EndPointYLabel->SetLabel(_("Point Y"));
m_Angle_Text->Show(false);
m_Angle_Ctrl->Show(false);
m_AngleUnit->Show(false);
break;
case S_ARC:
m_StartPointXLabel->SetLabel(_("Center X"));
m_StartPointYLabel->SetLabel(_("Center Y"));
m_EndPointXLabel->SetLabel(_("Start Point X"));
m_EndPointYLabel->SetLabel(_("Start Point Y"));
msg << m_Item->GetAngle();
m_Angle_Ctrl->SetValue(msg);
break;
default:
m_Angle_Text->Show(false);
m_Angle_Ctrl->Show(false);
m_AngleUnit->Show(false);
break;
}
PutValueInLocalUnits( *m_Center_StartXCtrl, m_Item->GetStart().x,
m_parent->GetInternalUnits() );
PutValueInLocalUnits( *m_Center_StartYCtrl, m_Item->GetStart().y,
m_parent->GetInternalUnits() );
PutValueInLocalUnits( *m_EndX_Radius_Ctrl, m_Item->GetEnd().x,
m_parent->GetInternalUnits() );
PutValueInLocalUnits( *m_EndY_Ctrl, m_Item->GetEnd().y,
m_parent->GetInternalUnits() );
PutValueInLocalUnits( *m_ThicknessCtrl, m_Item->GetWidth(),
m_parent->GetInternalUnits() );
int thickness;
if( m_Item->GetLayer() == EDGE_N )
thickness = m_brdSettings.m_EdgeSegmentWidth;
else
thickness = m_brdSettings.m_DrawSegmentWidth;
PutValueInLocalUnits( *m_DefaultThicknessCtrl, thickness,
m_parent->GetInternalUnits() );
for( int layer=FIRST_NO_COPPER_LAYER; layer <= LAST_NO_COPPER_LAYER; ++layer )
{
m_LayerSelectionCtrl->Append( m_parent->GetBoard()->GetLayerName( layer ) );
}
int layer = m_Item->GetLayer();
// Control:
if ( layer < FIRST_NO_COPPER_LAYER )
layer = FIRST_NO_COPPER_LAYER;
if ( layer > LAST_NO_COPPER_LAYER )
layer = LAST_NO_COPPER_LAYER;
m_LayerSelectionCtrl->SetSelection( layer - FIRST_NO_COPPER_LAYER );
}
DIALOG_TRACK_VIA_PROPERTIES::DIALOG_TRACK_VIA_PROPERTIES( PCB_BASE_FRAME* aParent, const SELECTION& aItems ) :
DIALOG_TRACK_VIA_PROPERTIES_BASE( aParent ), m_items( aItems ),
m_trackStartX( aParent, m_TrackStartXCtrl, m_TrackStartXUnit ),
m_trackStartY( aParent, m_TrackStartYCtrl, m_TrackStartYUnit ),
m_trackEndX( aParent, m_TrackEndXCtrl, m_TrackEndXUnit ),
m_trackEndY( aParent, m_TrackEndYCtrl, m_TrackEndYUnit ),
m_trackWidth( aParent, m_TrackWidthCtrl, m_TrackWidthUnit ),
m_viaX( aParent, m_ViaXCtrl, m_ViaXUnit ), m_viaY( aParent, m_ViaYCtrl, m_ViaYUnit ),
m_viaDiameter( aParent, m_ViaDiameterCtrl, m_ViaDiameterUnit ),
m_viaDrill( aParent, m_ViaDrillCtrl, m_ViaDrillUnit ),
m_tracks( false ), m_vias( false )
{
wxASSERT( !m_items.Empty() );
// This is a way to trick gcc into considering these variables as initialized
OPT<int> trackStartX = NULLOPT;
OPT<int> trackStartY = NULLOPT;
OPT<int> trackEndX = NULLOPT;
OPT<int> trackEndY = NULLOPT;
OPT<int> trackWidth = NULLOPT;
OPT<PCB_LAYER_ID> trackLayer = NULLOPT;
OPT<int> viaX = NULLOPT;
OPT<int> viaY = NULLOPT;
OPT<int> viaDiameter = NULLOPT;
OPT<int> viaDrill = NULLOPT;
VIATYPE_T viaType = VIA_NOT_DEFINED;
PCB_LAYER_ID viaStartLayer = UNDEFINED_LAYER;
PCB_LAYER_ID viaEndLayer = UNDEFINED_LAYER;
m_haveUniqueNet = true;
int prevNet = -1;
m_NetComboBox->SetBoard( aParent->GetBoard() );
m_NetComboBox->Enable( true );
bool hasLocked = false;
bool hasUnlocked = false;
for( auto& item : m_items )
{
int net = static_cast<BOARD_CONNECTED_ITEM*>(item)->GetNetCode();
if( prevNet >= 0 && net != prevNet )
{
printf("prev %d net %d\n", net, prevNet );
m_haveUniqueNet = false;
break;
}
prevNet = net;
}
if ( m_haveUniqueNet )
{
m_NetComboBox->SetSelectedNet( prevNet );
}
else
{
m_NetComboBox->SetMultiple( true );
}
// Look for values that are common for every item that is selected
for( auto& item : m_items )
{
switch( item->Type() )
{
case PCB_TRACE_T:
{
const TRACK* t = static_cast<const TRACK*>( item );
if( !m_tracks ) // first track in the list
{
trackStartX = t->GetStart().x;
trackStartY = t->GetStart().y;
trackEndX = t->GetEnd().x;
trackEndY = t->GetEnd().y;
trackWidth = t->GetWidth();
trackLayer = t->GetLayer();
m_tracks = true;
}
else // check if values are the same for every selected track
{
if( trackStartX && ( *trackStartX != t->GetStart().x ) )
trackStartX = NULLOPT;
if( trackStartY && ( *trackStartY != t->GetStart().y ) )
trackStartY = NULLOPT;
if( trackEndX && ( *trackEndX != t->GetEnd().x ) )
trackEndX = NULLOPT;
if( trackEndY && ( *trackEndY != t->GetEnd().y ) )
trackEndY = NULLOPT;
if( trackWidth && ( *trackWidth != t->GetWidth() ) )
trackWidth = NULLOPT;
if( trackLayer && ( *trackLayer != t->GetLayer() ) )
trackLayer = NULLOPT;
}
if( t->IsLocked() )
hasLocked = true;
else
hasUnlocked = true;
break;
}
case PCB_VIA_T:
{
const VIA* v = static_cast<const VIA*>( item );
if( !m_vias ) // first via in the list
{
viaX = v->GetPosition().x;
viaY = v->GetPosition().y;
viaDiameter = v->GetWidth();
viaDrill = v->GetDrillValue();
m_vias = true;
viaType = v->GetViaType();
viaStartLayer = v->TopLayer();
viaEndLayer = v->BottomLayer();
}
else // check if values are the same for every selected via
{
if( viaX && ( *viaX != v->GetPosition().x ) )
viaX = NULLOPT;
if( viaY && ( *viaY != v->GetPosition().y ) )
viaY = NULLOPT;
if( viaDiameter && ( *viaDiameter != v->GetWidth() ) )
viaDiameter = NULLOPT;
if( viaDrill && ( *viaDrill != v->GetDrillValue() ) )
viaDrill = NULLOPT;
if( viaType != v->GetViaType() )
viaType = VIA_NOT_DEFINED;
if( viaStartLayer != v->TopLayer() )
viaStartLayer = UNDEFINED_LAYER;
if( viaEndLayer != v->BottomLayer() )
viaEndLayer = UNDEFINED_LAYER;
}
if( v->IsLocked() )
hasLocked = true;
else
hasUnlocked = true;
break;
}
default:
{
wxASSERT( false );
break;
}
}
}
wxASSERT( m_tracks || m_vias );
if( m_vias )
{
setCommonVal( viaX, m_ViaXCtrl, m_viaX );
setCommonVal( viaY, m_ViaYCtrl, m_viaY );
setCommonVal( viaDiameter, m_ViaDiameterCtrl, m_viaDiameter );
setCommonVal( viaDrill, m_ViaDrillCtrl, m_viaDrill );
m_DesignRuleViasUnit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
int viaSelection = wxNOT_FOUND;
for( unsigned ii = 0; ii < aParent->GetDesignSettings().m_ViasDimensionsList.size(); ii++ )
{
VIA_DIMENSION* viaDimension = &aParent->GetDesignSettings().m_ViasDimensionsList[ii];
wxString msg = StringFromValue( g_UserUnit, viaDimension->m_Diameter, false )
+ " / " + StringFromValue( g_UserUnit, viaDimension->m_Drill, false );
m_DesignRuleViasCtrl->Append( msg, viaDimension );
if( viaSelection == wxNOT_FOUND && viaDiameter == viaDimension->m_Diameter
&& viaDrill == viaDimension->m_Drill )
{
viaSelection = ii;
}
}
m_DesignRuleViasCtrl->SetSelection( viaSelection );
m_DesignRuleViasCtrl->Connect( wxEVT_CHOICE, wxCommandEventHandler( DIALOG_TRACK_VIA_PROPERTIES::onViaSelect ), NULL, this );
m_ViaDiameterCtrl->Connect( wxEVT_TEXT, wxCommandEventHandler( DIALOG_TRACK_VIA_PROPERTIES::onViaEdit ), NULL, this );
m_ViaDrillCtrl->Connect( wxEVT_TEXT, wxCommandEventHandler( DIALOG_TRACK_VIA_PROPERTIES::onViaEdit ), NULL, this );
m_ViaTypeChoice->Connect( wxEVT_CHOICE, wxCommandEventHandler( DIALOG_TRACK_VIA_PROPERTIES::onViaEdit ), NULL, this );
m_ViaDiameterCtrl->SetFocus();
m_ViaTypeChoice->Enable();
if( viaType == VIA_THROUGH )
m_ViaTypeChoice->SetSelection( 0 );
else if( viaType == VIA_MICROVIA )
m_ViaTypeChoice->SetSelection( 1 );
else if ( viaType == VIA_BLIND_BURIED )
m_ViaTypeChoice->SetSelection( 2 );
else if( viaType == VIA_NOT_DEFINED )
m_ViaTypeChoice->SetSelection( 3 );
m_ViaStartLayer->SetLayersHotkeys( false );
m_ViaStartLayer->SetLayerSet( LSET::AllNonCuMask() );
m_ViaStartLayer->SetBoardFrame( aParent );
m_ViaStartLayer->Resync();
m_ViaEndLayer->SetLayersHotkeys( false );
m_ViaEndLayer->SetLayerSet( LSET::AllNonCuMask() );
m_ViaEndLayer->SetBoardFrame( aParent );
m_ViaEndLayer->Resync();
m_ViaStartLayer->SetLayerSelection( viaStartLayer );
m_ViaEndLayer->SetLayerSelection( viaEndLayer );
m_ViaStartLayer->Enable( false );
m_ViaEndLayer->Enable( false );
if( viaType != VIA_THROUGH ) // check if selected type isnt through.
{
m_ViaStartLayer->Enable();
m_ViaEndLayer->Enable();
}
}
else
{
m_MainSizer->Hide( m_sbViaSizer, true );
}
if( m_tracks )
{
setCommonVal( trackStartX, m_TrackStartXCtrl, m_trackStartX );
setCommonVal( trackStartY, m_TrackStartYCtrl, m_trackStartY );
setCommonVal( trackEndX, m_TrackEndXCtrl, m_trackEndX );
setCommonVal( trackEndY, m_TrackEndYCtrl, m_trackEndY );
setCommonVal( trackWidth, m_TrackWidthCtrl, m_trackWidth );
for( unsigned ii = 0; ii < aParent->GetDesignSettings().m_TrackWidthList.size(); ii++ )
{
int width = aParent->GetDesignSettings().m_TrackWidthList[ii];
wxString msg = StringFromValue( g_UserUnit, width, false );
m_TrackWidthCtrl->Append( msg );
}
m_TrackLayerCtrl->SetLayersHotkeys( false );
m_TrackLayerCtrl->SetLayerSet( LSET::AllNonCuMask() );
m_TrackLayerCtrl->SetBoardFrame( aParent );
m_TrackLayerCtrl->Resync();
if( trackLayer )
m_TrackLayerCtrl->SetLayerSelection( *trackLayer );
m_TrackWidthCtrl->SetFocus();
}
else
{
m_MainSizer->Hide( m_sbTrackSizer, true );
}
if( hasLocked && hasUnlocked )
{
m_lockedCbox->Set3StateValue( wxCHK_UNDETERMINED );
}
else if( hasLocked )
{
m_lockedCbox->Set3StateValue( wxCHK_CHECKED );
}
else
{
m_lockedCbox->Set3StateValue( wxCHK_UNCHECKED );
}
m_StdButtonsOK->SetDefault();
// Pressing ENTER when any of the text input fields is active applies changes
Connect( wxEVT_TEXT_ENTER, wxCommandEventHandler( DIALOG_TRACK_VIA_PROPERTIES::onOkClick ),
NULL, this );
}
void DIALOG_MODULE_MODULE_EDITOR::initModeditProperties()
{
SetFocus();
// Display the default path, given by environment variable KISYS3DMOD
wxString default_path;
wxGetEnv( wxT( KISYS3DMOD ), &default_path );
#ifdef __WINDOWS__
default_path.Replace( wxT( "/" ), wxT( "\\" ) );
#endif
m_textCtrl3DDefaultPath->SetValue( default_path );
m_lastSelected3DShapeIndex = -1;
// Init 3D shape list
S3D_MASTER* draw3D = m_currentModule->Models();
while( draw3D )
{
if( !draw3D->GetShape3DName().IsEmpty() )
{
S3D_MASTER* draw3DCopy = new S3D_MASTER(NULL);
draw3DCopy->Copy( draw3D );
m_shapes3D_list.push_back( draw3DCopy );
m_3D_ShapeNameListBox->Append( draw3DCopy->GetShape3DName() );
}
draw3D = (S3D_MASTER*) draw3D->Next();
}
m_DocCtrl->SetValue( m_currentModule->GetDescription() );
m_KeywordCtrl->SetValue( m_currentModule->GetKeywords() );
m_referenceCopy = new TEXTE_MODULE( NULL );
m_valueCopy = new TEXTE_MODULE( NULL );
m_referenceCopy->Copy( &m_currentModule->Reference() );
m_valueCopy->Copy( &m_currentModule->Value() );
m_ReferenceCtrl->SetValue( m_referenceCopy->GetText() );
m_ValueCtrl->SetValue( m_valueCopy->GetText() );
m_ValueCtrl->SetValue( m_valueCopy->GetText() );
m_FootprintNameCtrl->SetValue( m_currentModule->GetFPID().Format() );
m_AttributsCtrl->SetItemToolTip( 0, _( "Use this attribute for most non SMD components" ) );
m_AttributsCtrl->SetItemToolTip( 1,
_( "Use this attribute for SMD components.\nOnly components with this option are put in the footprint position list file" ) );
m_AttributsCtrl->SetItemToolTip( 2,
_( "Use this attribute for \"virtual\" components drawn on board (like a old ISA PC bus connector)" ) );
// Controls on right side of the dialog
switch( m_currentModule->GetAttributes() & 255 )
{
case 0:
m_AttributsCtrl->SetSelection( 0 );
break;
case MOD_CMS:
m_AttributsCtrl->SetSelection( 1 );
break;
case MOD_VIRTUAL:
m_AttributsCtrl->SetSelection( 2 );
break;
default:
m_AttributsCtrl->SetSelection( 0 );
break;
}
m_AutoPlaceCtrl->SetSelection( (m_currentModule->IsLocked()) ? 1 : 0 );
m_AutoPlaceCtrl->SetItemToolTip( 0, _( "Enable hotkey move commands and Auto Placement" ) );
m_AutoPlaceCtrl->SetItemToolTip( 1, _( "Disable hotkey move commands and Auto Placement" ) );
m_CostRot90Ctrl->SetValue( m_currentModule->GetPlacementCost90() );
m_CostRot180Ctrl->SetValue( m_currentModule->GetPlacementCost180() );
// Initialize 3D parameters
m_3D_Scale = new VERTEX_VALUE_CTRL( m_Panel3D, m_bSizerShapeScale );
m_3D_Offset = new VERTEX_VALUE_CTRL( m_Panel3D, m_bSizerShapeOffset );
m_3D_Rotation = new VERTEX_VALUE_CTRL( m_Panel3D, m_bSizerShapeRotation );
// Initialize dialog relative to masks clearances
m_NetClearanceUnits->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_SolderMaskMarginUnits->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_SolderPasteMarginUnits->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
wxString msg;
PutValueInLocalUnits( *m_NetClearanceValueCtrl, m_currentModule->GetLocalClearance() );
PutValueInLocalUnits( *m_SolderMaskMarginCtrl, m_currentModule->GetLocalSolderMaskMargin() );
// These 2 parameters are usually < 0, so prepare entering a negative value, if current is 0
PutValueInLocalUnits( *m_SolderPasteMarginCtrl, m_currentModule->GetLocalSolderPasteMargin() );
if( m_currentModule->GetLocalSolderPasteMargin() == 0 )
m_SolderPasteMarginCtrl->SetValue( wxT( "-" ) + m_SolderPasteMarginCtrl->GetValue() );
if( m_currentModule->GetLocalSolderPasteMarginRatio() == 0.0 )
msg.Printf( wxT( "-%f" ), m_currentModule->GetLocalSolderPasteMarginRatio() * 100.0 );
else
msg.Printf( wxT( "%f" ), m_currentModule->GetLocalSolderPasteMarginRatio() * 100.0 );
m_SolderPasteMarginRatioCtrl->SetValue( msg );
// Add solder paste margin ration in per cent
// for the usual default value 0.0, display -0.0 (or -0,0 in some countries)
msg.Printf( wxT( "%f" ), m_currentModule->GetLocalSolderPasteMarginRatio() * 100.0 );
if( m_currentModule->GetLocalSolderPasteMarginRatio() == 0.0 &&
msg[0] == '0') // Sometimes Printf adds a sign if the value is very small (0.0)
m_SolderPasteMarginRatioCtrl->SetValue( wxT( "-" ) + msg );
else
m_SolderPasteMarginRatioCtrl->SetValue( msg );
// if m_3D_ShapeNameListBox is not empty, preselect first 3D shape
if( m_3D_ShapeNameListBox->GetCount() > 0 )
{
m_lastSelected3DShapeIndex = 0;
m_3D_ShapeNameListBox->SetSelection( m_lastSelected3DShapeIndex );
Transfert3DValuesToDisplay( m_shapes3D_list[m_lastSelected3DShapeIndex] );
}
// We have modified the UI, so call Fit() for m_Panel3D
// to be sure the m_Panel3D sizers are initialized before opening the dialog
m_Panel3D->GetSizer()->Fit( m_Panel3D );
}
bool DIALOG_MODEDIT_FP_BODY_ITEM_PROPERTIES::TransferDataToWindow()
{
// Set unit symbol
wxStaticText* texts_unit[] =
{
m_StartPointXUnit,
m_StartPointYUnit,
m_EndPointXUnit,
m_EndPointYUnit,
m_ThicknessTextUnit,
m_DefaulThicknessTextUnit,
};
for( size_t ii = 0; ii < DIM( texts_unit ); ii++ )
{
texts_unit[ii]->SetLabel( GetAbbreviatedUnitsLabel() );
}
wxString msg;
// Change texts according to the segment shape:
switch( m_item->GetShape() )
{
case S_CIRCLE:
SetTitle( _( "Circle Properties" ) );
m_StartPointXLabel->SetLabel( _( "Center X" ) );
m_StartPointYLabel->SetLabel( _( "Center Y" ) );
m_EndPointXLabel->SetLabel( _( "Point X" ) );
m_EndPointYLabel->SetLabel( _( "Point Y" ) );
m_AngleText->Show( false );
m_AngleCtrl->Show( false );
m_AngleUnit->Show( false );
break;
case S_ARC:
SetTitle( _( "Arc Properties" ) );
m_StartPointXLabel->SetLabel( _( "Center X" ) );
m_StartPointYLabel->SetLabel( _( "Center Y" ) );
m_EndPointXLabel->SetLabel( _( "Start Point X" ) );
m_EndPointYLabel->SetLabel( _( "Start Point Y" ) );
m_AngleValue = m_item->GetAngle() / 10.0;
break;
case S_SEGMENT:
SetTitle( _( "Line Segment Properties" ) );
// Fall through.
default:
m_AngleText->Show( false );
m_AngleCtrl->Show( false );
m_AngleUnit->Show( false );
break;
}
PutValueInLocalUnits( *m_Center_StartXCtrl, m_item->GetStart().x );
PutValueInLocalUnits( *m_Center_StartYCtrl, m_item->GetStart().y );
PutValueInLocalUnits( *m_EndX_Radius_Ctrl, m_item->GetEnd().x );
PutValueInLocalUnits( *m_EndY_Ctrl, m_item->GetEnd().y );
PutValueInLocalUnits( *m_ThicknessCtrl, m_item->GetWidth() );
PutValueInLocalUnits( *m_DefaultThicknessCtrl, m_brdSettings.m_ModuleSegmentWidth );
// Configure the layers list selector
m_LayerSelectionCtrl->SetLayersHotkeys( false );
m_LayerSelectionCtrl->SetLayerSet( LSET::InternalCuMask().set( Edge_Cuts ) );
m_LayerSelectionCtrl->SetBoardFrame( m_parent );
m_LayerSelectionCtrl->Resync();
if( m_LayerSelectionCtrl->SetLayerSelection( m_item->GetLayer() ) < 0 )
{
wxMessageBox( _( "This item was on an unknown layer.\n"
"It has been moved to the front silk screen layer. Please fix it." ) );
m_LayerSelectionCtrl->SetLayerSelection( F_SilkS );
}
return DIALOG_GRAPHIC_ITEM_PROPERTIES_BASE::TransferDataToWindow();
}
wxString PANEL_PREV_3D::formatRotationValue( double aValue )
{
return wxString::Format( "%.2f %s", aValue, GetAbbreviatedUnitsLabel( DEGREES ) );
}
void DIALOG_PAD_PROPERTIES::initValues()
{
wxString msg;
double angle;
// Setup layers names from board
// Should be made first, before calling m_rbCopperLayersSel->SetSelection()
m_rbCopperLayersSel->SetString( 0, m_board->GetLayerName( LAYER_N_FRONT ) );
m_rbCopperLayersSel->SetString( 1, m_board->GetLayerName( LAYER_N_BACK ) );
m_PadLayerAdhCmp->SetLabel( m_board->GetLayerName( ADHESIVE_N_FRONT ) );
m_PadLayerAdhCu->SetLabel( m_board->GetLayerName( ADHESIVE_N_BACK ) );
m_PadLayerPateCmp->SetLabel( m_board->GetLayerName( SOLDERPASTE_N_FRONT ) );
m_PadLayerPateCu->SetLabel( m_board->GetLayerName( SOLDERPASTE_N_BACK ) );
m_PadLayerSilkCmp->SetLabel( m_board->GetLayerName( SILKSCREEN_N_FRONT ) );
m_PadLayerSilkCu->SetLabel( m_board->GetLayerName( SILKSCREEN_N_BACK ) );
m_PadLayerMaskCmp->SetLabel( m_board->GetLayerName( SOLDERMASK_N_FRONT ) );
m_PadLayerMaskCu->SetLabel( m_board->GetLayerName( SOLDERMASK_N_BACK ) );
m_PadLayerECO1->SetLabel( m_board->GetLayerName( ECO1_N ) );
m_PadLayerECO2->SetLabel( m_board->GetLayerName( ECO2_N ) );
m_PadLayerDraft->SetLabel( m_board->GetLayerName( DRAW_N ) );
m_isFlipped = false;
if( m_currentPad )
{
MODULE* module = m_currentPad->GetParent();
if( module->GetLayer() == LAYER_N_BACK )
{
m_isFlipped = true;
m_staticModuleSideValue->SetLabel( _( "Back side (footprint is mirrored)" ) );
}
msg.Printf( wxT( "%.1f" ), module->GetOrientation() / 10.0 );
m_staticModuleRotValue->SetLabel( msg );
}
if( m_isFlipped )
{
wxPoint pt = m_dummyPad->GetOffset();
NEGATE( pt.y );
m_dummyPad->SetOffset( pt );
wxSize sz = m_dummyPad->GetDelta();
NEGATE( sz.y );
m_dummyPad->SetDelta( sz );
// flip pad's layers
m_dummyPad->SetLayerMask( FlipLayerMask( m_dummyPad->GetLayerMask() ) );
}
m_staticTextWarningPadFlipped->Show(m_isFlipped);
m_PadNumCtrl->SetValue( m_dummyPad->GetPadName() );
m_PadNetNameCtrl->SetValue( m_dummyPad->GetNetname() );
// Display current unit name in dialog:
m_PadPosX_Unit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_PadPosY_Unit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_PadDrill_X_Unit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_PadDrill_Y_Unit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_PadShapeSizeX_Unit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_PadShapeSizeY_Unit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_PadShapeOffsetX_Unit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_PadShapeOffsetY_Unit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_PadShapeDelta_Unit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_PadLengthDie_Unit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
// Display current pad masks clearances units
m_NetClearanceUnits->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_SolderMaskMarginUnits->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_SolderPasteMarginUnits->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_ThermalWidthUnits->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_ThermalGapUnits->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
// Display current pad parameters units:
PutValueInLocalUnits( *m_PadPosition_X_Ctrl, m_dummyPad->GetPosition().x );
PutValueInLocalUnits( *m_PadPosition_Y_Ctrl, m_dummyPad->GetPosition().y );
PutValueInLocalUnits( *m_PadDrill_X_Ctrl, m_dummyPad->GetDrillSize().x );
PutValueInLocalUnits( *m_PadDrill_Y_Ctrl, m_dummyPad->GetDrillSize().y );
PutValueInLocalUnits( *m_ShapeSize_X_Ctrl, m_dummyPad->GetSize().x );
PutValueInLocalUnits( *m_ShapeSize_Y_Ctrl, m_dummyPad->GetSize().y );
PutValueInLocalUnits( *m_ShapeOffset_X_Ctrl, m_dummyPad->GetOffset().x );
PutValueInLocalUnits( *m_ShapeOffset_Y_Ctrl, m_dummyPad->GetOffset().y );
if( m_dummyPad->GetDelta().x )
{
PutValueInLocalUnits( *m_ShapeDelta_Ctrl, m_dummyPad->GetDelta().x );
m_trapDeltaDirChoice->SetSelection( 0 );
}
else
{
PutValueInLocalUnits( *m_ShapeDelta_Ctrl, m_dummyPad->GetDelta().y );
m_trapDeltaDirChoice->SetSelection( 1 );
}
PutValueInLocalUnits( *m_LengthPadToDieCtrl, m_dummyPad->GetPadToDieLength() );
PutValueInLocalUnits( *m_NetClearanceValueCtrl, m_dummyPad->GetLocalClearance() );
PutValueInLocalUnits( *m_SolderMaskMarginCtrl, m_dummyPad->GetLocalSolderMaskMargin() );
PutValueInLocalUnits( *m_ThermalWidthCtrl, m_dummyPad->GetThermalWidth() );
PutValueInLocalUnits( *m_ThermalGapCtrl, m_dummyPad->GetThermalGap() );
// These 2 parameters are usually < 0, so prepare entering a negative value, if current is 0
PutValueInLocalUnits( *m_SolderPasteMarginCtrl, m_dummyPad->GetLocalSolderPasteMargin() );
if( m_dummyPad->GetLocalSolderPasteMargin() == 0 )
m_SolderPasteMarginCtrl->SetValue( wxT( "-" ) + m_SolderPasteMarginCtrl->GetValue() );
msg.Printf( wxT( "%f" ), m_dummyPad->GetLocalSolderPasteMarginRatio() * 100.0 );
if( m_dummyPad->GetLocalSolderPasteMarginRatio() == 0.0 && msg[0] == '0' )
// Sometimes Printf adds a sign if the value is small
m_SolderPasteMarginRatioCtrl->SetValue( wxT( "-" ) + msg );
else
m_SolderPasteMarginRatioCtrl->SetValue( msg );
switch( m_dummyPad->GetZoneConnection() )
{
default:
case UNDEFINED_CONNECTION:
m_ZoneConnectionChoice->SetSelection( 0 );
break;
case PAD_IN_ZONE:
m_ZoneConnectionChoice->SetSelection( 1 );
break;
case THERMAL_PAD:
m_ZoneConnectionChoice->SetSelection( 2 );
break;
case PAD_NOT_IN_ZONE:
m_ZoneConnectionChoice->SetSelection( 3 );
break;
}
if( m_currentPad )
{
MODULE* module = m_currentPad->GetParent();
angle = m_currentPad->GetOrientation() - module->GetOrientation();
if( m_isFlipped )
NEGATE( angle );
m_dummyPad->SetOrientation( angle );
}
angle = m_dummyPad->GetOrientation();
NORMALIZE_ANGLE_180( angle ); // ? normalizing is in D_PAD::SetOrientation()
// Set layers used by this pad: :
setPadLayersList( m_dummyPad->GetLayerMask() );
// Pad Orient
switch( int( angle ) )
{
case 0:
m_PadOrient->SetSelection( 0 );
break;
case 900:
m_PadOrient->SetSelection( 1 );
break;
case -900:
m_PadOrient->SetSelection( 2 );
break;
case 1800:
case -1800:
m_PadOrient->SetSelection( 3 );
break;
default:
m_PadOrient->SetSelection( 4 );
break;
}
switch( m_dummyPad->GetShape() )
{
default:
case PAD_CIRCLE:
m_PadShape->SetSelection( 0 );
break;
case PAD_OVAL:
m_PadShape->SetSelection( 1 );
break;
case PAD_RECT:
m_PadShape->SetSelection( 2 );
break;
case PAD_TRAPEZOID:
m_PadShape->SetSelection( 3 );
break;
}
msg.Printf( wxT( "%g" ), angle );
m_PadOrientCtrl->SetValue( msg );
// Type of pad selection
m_PadType->SetSelection( 0 );
for( unsigned ii = 0; ii < NBTYPES; ii++ )
{
if( CodeType[ii] == m_dummyPad->GetAttribute() )
{
m_PadType->SetSelection( ii );
break;
}
}
// Enable/disable Pad name,and pad length die
// (disable for NPTH pads (mechanical pads)
bool enable = m_dummyPad->GetAttribute() != PAD_HOLE_NOT_PLATED;
m_PadNumCtrl->Enable( enable );
m_PadNetNameCtrl->Enable( enable );
m_LengthPadToDieCtrl->Enable( enable );
if( m_dummyPad->GetDrillShape() != PAD_OVAL )
m_DrillShapeCtrl->SetSelection( 0 );
else
m_DrillShapeCtrl->SetSelection( 1 );
// Update some dialog widgets state (Enable/disable options):
wxCommandEvent cmd_event;
setPadLayersList( m_dummyPad->GetLayerMask() );
OnDrillShapeSelected( cmd_event );
OnPadShapeSelection( cmd_event );
}
void DIALOG_GRAPHIC_ITEM_PROPERTIES::initDlg()
{
m_StandardButtonsSizerOK->SetDefault();
// Set unit symbol
wxStaticText* texts_unit[] =
{
m_StartPointXUnit,
m_StartPointYUnit,
m_EndPointXUnit,
m_EndPointYUnit,
m_ThicknessTextUnit,
m_DefaulThicknessTextUnit,
NULL
};
for( int ii = 0; ; ii++ )
{
if( texts_unit[ii] == NULL )
break;
texts_unit[ii]->SetLabel( GetAbbreviatedUnitsLabel() );
}
wxString msg;
// Change texts according to the segment shape:
switch( m_item->GetShape() )
{
case S_CIRCLE:
SetTitle( _( "Circle Properties" ) );
m_StartPointXLabel->SetLabel( _( "Center X" ) );
m_StartPointYLabel->SetLabel( _( "Center Y" ) );
m_EndPointXLabel->SetLabel( _( "Point X" ) );
m_EndPointYLabel->SetLabel( _( "Point Y" ) );
m_Angle_Text->Show( false );
m_Angle_Ctrl->Show( false );
m_AngleUnit->Show( false );
break;
case S_ARC:
SetTitle( _( "Arc Properties" ) );
m_StartPointXLabel->SetLabel( _( "Center X" ) );
m_StartPointYLabel->SetLabel( _( "Center Y" ) );
m_EndPointXLabel->SetLabel( _( "Start Point X" ) );
m_EndPointYLabel->SetLabel( _( "Start Point Y" ) );
// Here the angle is a double, but the UI is still working with integers.
msg << int( m_item->GetAngle() );
m_Angle_Ctrl->SetValue( msg );
break;
case S_SEGMENT:
SetTitle( _( "Line Segment Properties" ) );
// Fall through.
default:
m_Angle_Text->Show( false );
m_Angle_Ctrl->Show( false );
m_AngleUnit->Show( false );
break;
}
PutValueInLocalUnits( *m_Center_StartXCtrl, m_item->GetStart().x );
PutValueInLocalUnits( *m_Center_StartYCtrl, m_item->GetStart().y );
PutValueInLocalUnits( *m_EndX_Radius_Ctrl, m_item->GetEnd().x );
PutValueInLocalUnits( *m_EndY_Ctrl, m_item->GetEnd().y );
PutValueInLocalUnits( *m_ThicknessCtrl, m_item->GetWidth() );
int thickness;
if( m_item->GetLayer() == Edge_Cuts )
thickness = m_brdSettings.m_EdgeSegmentWidth;
else
thickness = m_brdSettings.m_DrawSegmentWidth;
PutValueInLocalUnits( *m_DefaultThicknessCtrl, thickness );
// Configure the layers list selector
m_LayerSelectionCtrl->SetLayersHotkeys( false );
m_LayerSelectionCtrl->SetLayerSet( LSET::AllCuMask() );
m_LayerSelectionCtrl->SetBoardFrame( m_parent );
m_LayerSelectionCtrl->Resync();
if( m_LayerSelectionCtrl->SetLayerSelection( m_item->GetLayer() ) < 0 )
{
wxMessageBox( _( "This item was on an unknown layer.\n"
"It has been moved to the drawings layer. Please fix it." ) );
m_LayerSelectionCtrl->SetLayerSelection( Dwgs_User );
}
}