/**
*\brief This function initializes the MMCSD controller and mounts the device.
*
* \param - none.\n
*
* \return none.\n
*
*/
void HSMMCSDInit(void)
{
/* Basic controller initializations */
HSMMCSDControllerSetup();
/* First check, if card is insterted */
while(1)
{
if (MMCSDCardPresent(&ctrlInfo) == 0)
{
UARTPuts("MMC/SD Card not found\n\r", -1);
}
else
{
break;
}
}
/* Initialize the MMCSD controller */
MMCSDCtrlInit(&ctrlInfo);
MMCSDIntEnable(&ctrlInfo);
HSMMCSDFsMount(0, &sdCard);
}
/**
*\brief This function initializes the MMCSD controller and mounts the device.
*
* \param - none.\n
*
* \return none.\n
*
*/
void HSMMCSDInit(void)
{
/* Basic controller initializations for MMC_0 MicroSD card */
HSMMCSDControllerSetup();
/* Basic controller function for eMMc MMC_1 controller setup*/
//eMMCControllerSetup();
/* First check, if card is insterted */
while(1)
{
if (MMCSDCardPresent(&ctrlInfo) == 0)
{
UARTPuts("SD Card not found\n\r", -1);
}
else
{
break;
}
}
/* Initialize the MMCSD controller */
// MMCSDCtrlInit(&ctrlInfo);
// MMCSDIntEnable(&ctrlInfo);
HSMMCSDFsMount(0, &sdCard);
}
int main(void)
{
volatile unsigned int i = 0;
volatile unsigned int initFlg = 1;
/* Setup the MMU and do necessary MMU configurations. */
MMUConfigAndEnable();
/* Enable all levels of CACHE. */
CacheEnable(CACHE_ALL);
/* Initialize UART. */
UARTStdioInit();
/* Configure the EDMA clocks. */
EDMAModuleClkConfig();
/* Configure EDMA to service the HSMMCSD events. */
HSMMCSDEdmaInit();
/* Perform pin-mux for HSMMCSD pins. */
HSMMCSDPinMuxSetup();
/* Enable module clock for HSMMCSD. */
HSMMCSDModuleClkConfig();
/* Basic controller initializations */
HSMMCSDControllerSetup();
DelayTimerSetup();
#ifdef MMCSD_PERF
PerfTimerSetup();
#endif
/* Basic controller initializations */
HSMMCSDControllerSetup();
/* Initialize the MMCSD controller */
MMCSDCtrlInit(&ctrlInfo);
MMCSDIntEnable(&ctrlInfo);
while(1)
{
if((HSMMCSDCardPresent(&ctrlInfo)) == 1)
{
if(initFlg)
{
HSMMCSDFsMount(0, &sdCard);
initFlg = 0;
Cmd_help(0, NULL);
}
HSMMCSDFsProcessCmdLine();
}
else
{
delay(1);
i = (i + 1) & 0xFFF;
if(i == 1)
{
UARTPuts("Please insert the card \n\r", -1);
}
if(initFlg != 1)
{
/* Reinitialize all the state variables */
callbackOccured = 0;
xferCompFlag = 0;
dataTimeout = 0;
cmdCompFlag = 0;
cmdTimeout = 0;
/* Initialize the MMCSD controller */
MMCSDCtrlInit(&ctrlInfo);
MMCSDIntEnable(&ctrlInfo);
}
initFlg = 1;
}
}
}
int main(void)
{
volatile unsigned int i = 0;
volatile unsigned int initFlg = 1;
/* Setup the MMU and do necessary MMU configurations. */
// MMUConfigAndEnable();
/* Enable all levels of CACHE. */
CacheEnable(CACHE_ALL);
/* Initialize console for communication with the Host Machine */
ConsoleUtilsInit();
/*
** Select the console type based on compile time check
** Note: This example is not fully complaint to semihosting. It is
** recommended to use Uart console interface only.
*/
ConsoleUtilsSetType(CONSOLE_UART);
/* Enabling functional clocks for GPIO1 instance. */
// GPIO1ModuleClkConfig();
/* Enabling the GPIO module. */
// GPIOModuleEnable(GPIO_INSTANCE_ADDRESS);
/* Resetting the GPIO module. */
// GPIOModuleReset(GPIO_INSTANCE_ADDRESS);
/* Setting the GPIO pin as an output pin. */
// GPIODirModeSet(GPIO_INSTANCE_ADDRESS,GPIO_INSTANCE_PIN_NUMBER,GPIO_DIR_OUTPUT);
// GPIOPinWrite(GPIO_INSTANCE_ADDRESS,GPIO_INSTANCE_PIN_NUMBER,GPIO_PIN_HIGH);
// GPIOPinWrite(GPIO_INSTANCE_ADDRESS,GPIO_INSTANCE_PIN_NUMBER,GPIO_PIN_LOW);
/* Configure the EDMA clocks. */
EDMAModuleClkConfig();
/* Configure EDMA to service the HSMMCSD events. */
HSMMCSDEdmaInit();
/* Perform pin-mux for HSMMCSD pins. */
HSMMCSDPinMuxSetup();
/* Enable module clock for HSMMCSD. */
HSMMCSDModuleClkConfig();
DelayTimerSetup();
#ifdef MMCSD_PERF
PerfTimerSetup();
#endif
/* Basic controller initializations */
HSMMCSDControllerSetup();
/* Initialize the MMCSD controller */
HSMMCSDControllerInit(&ctrlInfo);
ctrlInfo.intrEnable(&ctrlInfo);
while(1)
{
if(HSMMCSDIsCardInserted(ctrlInfo.memBase) == 1)
{
if(initFlg)
{
HSMMCSDFsMount(0, &sdCard);
initFlg = 0;
Cmd_help(0, NULL);
}
HSMMCSDFsProcessCmdLine();
}
else
{
delay(1);
i = (i + 1) & 0xFFF;
if(i == 1)
{
ConsoleUtilsPrintf("Please insert the card \n\r");
}
if(initFlg != 1)
{
/* Reinitialize all the state variables */
callbackOccured = 0;
xferCompFlag = 0;
dataTimeout = 0;
cmdCompFlag = 0;
cmdTimeout = 0;
/* Initialize the MMCSD controller */
HSMMCSDControllerInit(&ctrlInfo);
ctrlInfo.intrEnable(&ctrlInfo);
}
initFlg = 1;
}
}
}
int main(void)
{
volatile unsigned int i = 0;
volatile unsigned int initFlg = 1;
/* Setup the MMU and do necessary MMU configurations. */
MMUConfigAndEnable();
/* Enable all levels of CACHE. */
CacheEnable(CACHE_ALL);
/* Initialize console for communication with the Host Machine */
ConsoleUtilsInit();
/*
** Select the console type based on compile time check
** Note: This example is not fully complaint to semihosting. It is
** recommended to use Uart console interface only.
*/
ConsoleUtilsSetType(CONSOLE_UART);
/* Configure the EDMA clocks. */
EDMAModuleClkConfig();
/* Configure EDMA to service the HSMMCSD events. */
HSMMCSDEdmaInit();
/* Perform pin-mux for HSMMCSD pins. */
HSMMCSDPinMuxSetup();
/* Enable module clock for HSMMCSD. */
HSMMCSDModuleClkConfig();
DelayTimerSetup();
#ifdef MMCSD_PERF
PerfTimerSetup();
#endif
/* Basic controller initializations */
HSMMCSDControllerSetup();
/* Initialize the MMCSD controller */
MMCSDCtrlInit(&ctrlInfo);
MMCSDIntEnable(&ctrlInfo);
while(1)
{
if((HSMMCSDCardPresent(&ctrlInfo)) == 1)
{
if(initFlg)
{
HSMMCSDFsMount(0, &sdCard);
initFlg = 0;
Cmd_help(0, NULL);
}
HSMMCSDFsProcessCmdLine();
}
else
{
delay(1);
i = (i + 1) & 0xFFF;
if(i == 1)
{
ConsoleUtilsPrintf("Please insert the card \n\r");
}
if(initFlg != 1)
{
/* Reinitialize all the state variables */
callbackOccured = 0;
xferCompFlag = 0;
dataTimeout = 0;
cmdCompFlag = 0;
cmdTimeout = 0;
/* Initialize the MMCSD controller */
MMCSDCtrlInit(&ctrlInfo);
MMCSDIntEnable(&ctrlInfo);
}
initFlg = 1;
}
}
}
