static USHORT update_associated_mac_entry(
IN RTMP_ADAPTER *pAd,
IN MAC_TABLE_ENTRY *pEntry,
IN IE_LISTS *ie_list,
IN UCHAR MaxSupportedRate)
{
MULTISSID_STRUCT *wdev;
#ifdef TXBF_SUPPORT
BOOLEAN supportsETxBF = FALSE;
#endif // TXBF_SUPPORT //
wdev = &pAd->ApCfg.MBSSID[pEntry->apidx];
/* Update auth, wep, legacy transmit rate setting . */
pEntry->Sst = SST_ASSOC;
pEntry->MaxSupportedRate = min(pAd->CommonCfg.MaxTxRate, MaxSupportedRate);
set_entry_phy_cfg(pAd, pEntry);
pEntry->CapabilityInfo = ie_list->CapabilityInfo;
if ((pEntry->AuthMode == Ndis802_11AuthModeWPAPSK) || (pEntry->AuthMode == Ndis802_11AuthModeWPA2PSK))
{
pEntry->PrivacyFilter = Ndis802_11PrivFilter8021xWEP;
pEntry->WpaState = AS_INITPSK;
}
#ifdef DOT1X_SUPPORT
else if ((pEntry->AuthMode == Ndis802_11AuthModeWPA) ||
(pEntry->AuthMode == Ndis802_11AuthModeWPA2) ||
(wdev->IEEE8021X == TRUE))
{
pEntry->PrivacyFilter = Ndis802_11PrivFilter8021xWEP;
pEntry->WpaState = AS_AUTHENTICATION;
}
#endif /* DOT1X_SUPPORT */
/*if (ClientRalinkIe & 0x00000004) */
if (ie_list->RalinkIe != 0x0)
CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_RALINK_CHIPSET);
else
CLIENT_STATUS_CLEAR_FLAG(pEntry, fCLIENT_STATUS_RALINK_CHIPSET);
/* Ralink proprietary Piggyback and Aggregation support for legacy RT61 chip */
CLIENT_STATUS_CLEAR_FLAG(pEntry, fCLIENT_STATUS_AGGREGATION_CAPABLE);
CLIENT_STATUS_CLEAR_FLAG(pEntry, fCLIENT_STATUS_PIGGYBACK_CAPABLE);
#ifdef AGGREGATION_SUPPORT
if ((pAd->CommonCfg.bAggregationCapable) && (ie_list->RalinkIe & 0x00000001))
{
CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_AGGREGATION_CAPABLE);
DBGPRINT(RT_DEBUG_TRACE, ("ASSOC -RaAggregate= 1\n"));
}
#endif /* AGGREGATION_SUPPORT */
#ifdef PIGGYBACK_SUPPORT
if ((pAd->CommonCfg.bPiggyBackCapable) && (ie_list->RalinkIe & 0x00000002))
{
CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_PIGGYBACK_CAPABLE);
DBGPRINT(RT_DEBUG_TRACE, ("ASSOC -PiggyBack= 1\n"));
}
#endif /* PIGGYBACK_SUPPORT */
/* In WPA or 802.1x mode, the port is not secured, otherwise is secued. */
if ((pEntry->AuthMode >= Ndis802_11AuthModeWPA)
#ifdef DOT1X_SUPPORT
|| (wdev->IEEE8021X == TRUE)
#endif /* DOT1X_SUPPORT */
)
pEntry->PortSecured = WPA_802_1X_PORT_NOT_SECURED;
else
pEntry->PortSecured = WPA_802_1X_PORT_SECURED;
#ifdef SOFT_ENCRYPT
/* There are some situation to need to encryption by software
1. The Client support PMF. It shall ony support AES cipher.
2. The Client support WAPI.
If use RT3883 or later, HW can handle the above.
*/
#endif /* SOFT_ENCRYPT */
#ifdef DOT11_N_SUPPORT
/*
WFA recommend to restrict the encryption type in 11n-HT mode.
So, the WEP and TKIP are not allowed in HT rate.
*/
if (pAd->CommonCfg.HT_DisallowTKIP &&
IS_INVALID_HT_SECURITY(pEntry->WepStatus))
{
/* Force to None-HT mode due to WiFi 11n policy */
ie_list->ht_cap_len = 0;
DBGPRINT(RT_DEBUG_TRACE, ("%s : Force the STA as Non-HT mode\n", __FUNCTION__));
}
/* If this Entry supports 802.11n, upgrade to HT rate. */
if ((ie_list->ht_cap_len != 0) &&
(wdev->DesiredHtPhyInfo.bHtEnable) &&
WMODE_CAP_N(pAd->CommonCfg.PhyMode))
{
ht_mode_adjust(pAd, pEntry, &ie_list->HTCapability, &pAd->CommonCfg.DesiredHtPhy);
#ifdef DOT11N_DRAFT3
if (ie_list->ExtCapInfo.BssCoexistMgmtSupport)
pEntry->BSS2040CoexistenceMgmtSupport = 1;
#endif /* DOT11N_DRAFT3 */
/* 40Mhz BSS Width Trigger events */
if (ie_list->HTCapability.HtCapInfo.Forty_Mhz_Intolerant)
{
#ifdef DOT11N_DRAFT3
pEntry->bForty_Mhz_Intolerant = TRUE;
pAd->MacTab.fAnyStaFortyIntolerant = TRUE;
if(((pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth == BW_40) &&
(pAd->CommonCfg.Channel <=14)) &&
((pAd->CommonCfg.bBssCoexEnable == TRUE) &&
(pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth != 0) &&
(pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset != 0))
)
{
pAd->CommonCfg.LastBSSCoexist2040.field.BSS20WidthReq = 1;
pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth = 0;
pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset = 0;
pAd->CommonCfg.Bss2040CoexistFlag |= BSS_2040_COEXIST_INFO_SYNC;
}
DBGPRINT(RT_DEBUG_TRACE, ("pEntry set 40MHz Intolerant as 1\n"));
#endif /* DOT11N_DRAFT3 */
Handle_BSS_Width_Trigger_Events(pAd);
}
#ifdef TXBF_SUPPORT
supportsETxBF = clientSupportsETxBF(pAd, &ie_list->HtCapability.TxBFCap);
#endif /* TXBF_SUPPORT */
/* find max fixed rate */
pEntry->MaxHTPhyMode.field.MCS = get_ht_max_mcs(pAd, &wdev->DesiredHtPhyInfo.MCSSet[0],
&ie_list->HTCapability.MCSSet[0]);
if (wdev->DesiredTransmitSetting.field.MCS != MCS_AUTO)
{
DBGPRINT(RT_DEBUG_TRACE, ("@@@ IF-ra%d DesiredTransmitSetting.field.MCS = %d\n",
pEntry->apidx,
wdev->DesiredTransmitSetting.field.MCS));
set_ht_fixed_mcs(pAd, pEntry, wdev->DesiredTransmitSetting.field.MCS, wdev->HTPhyMode.field.MCS);
}
pEntry->MaxHTPhyMode.field.STBC = (ie_list->HTCapability.HtCapInfo.RxSTBC & (pAd->CommonCfg.DesiredHtPhy.TxSTBC));
// TODO: shiang-6590, check if this is necessary here, perforce didn't have this
if (ie_list->HTCapability.HtCapParm.MpduDensity < 5)
ie_list->HTCapability.HtCapParm.MpduDensity = 5;
pEntry->MpduDensity = ie_list->HTCapability.HtCapParm.MpduDensity;
pEntry->MaxRAmpduFactor = ie_list->HTCapability.HtCapParm.MaxRAmpduFactor;
pEntry->MmpsMode = (UCHAR)ie_list->HTCapability.HtCapInfo.MimoPs;
pEntry->AMsduSize = (UCHAR)ie_list->HTCapability.HtCapInfo.AMsduSize;
if (pAd->CommonCfg.DesiredHtPhy.AmsduEnable && (pAd->CommonCfg.REGBACapability.field.AutoBA == FALSE))
CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_AMSDU_INUSED);
if (ie_list->HTCapability.HtCapInfo.ShortGIfor20)
CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_SGI20_CAPABLE);
if (ie_list->HTCapability.HtCapInfo.ShortGIfor40)
CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_SGI40_CAPABLE);
if (ie_list->HTCapability.HtCapInfo.TxSTBC)
CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_TxSTBC_CAPABLE);
if (ie_list->HTCapability.HtCapInfo.RxSTBC)
CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_RxSTBC_CAPABLE);
if (ie_list->HTCapability.ExtHtCapInfo.PlusHTC)
CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_HTC_CAPABLE);
if (pAd->CommonCfg.bRdg && ie_list->HTCapability.ExtHtCapInfo.RDGSupport)
CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_RDG_CAPABLE);
if (ie_list->HTCapability.ExtHtCapInfo.MCSFeedback == 0x03)
CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_MCSFEEDBACK_CAPABLE);
/* Record the received capability from association request */
NdisMoveMemory(&pEntry->HTCapability, &ie_list->HTCapability, sizeof(HT_CAPABILITY_IE));
#ifdef DOT11_VHT_AC
if (WMODE_CAP_AC(pAd->CommonCfg.PhyMode) &&
(pAd->CommonCfg.Channel > 14) &&
ie_list->vht_cap_len)
{
pEntry->MaxHTPhyMode.field.MODE = MODE_VHT;
if ((pEntry->MaxHTPhyMode.field.BW== BW_40) && (wdev->DesiredHtPhyInfo.vht_bw))
pEntry->MaxHTPhyMode.field.BW = BW_80;
NdisMoveMemory(&pEntry->vht_cap_ie, &ie_list->vht_cap, sizeof(VHT_CAP_IE));
}
#endif /* DOT11_VHT_AC */
}
else
{
pAd->MacTab.fAnyStationIsLegacy = TRUE;
NdisZeroMemory(&pEntry->HTCapability, sizeof(HT_CAPABILITY_IE));
}
#endif /* DOT11_N_SUPPORT */
pEntry->HTPhyMode.word = pEntry->MaxHTPhyMode.word;
pEntry->CurrTxRate = pEntry->MaxSupportedRate;
#ifdef MFB_SUPPORT
pEntry->lastLegalMfb = 0;
pEntry->isMfbChanged = FALSE;
pEntry->fLastChangeAccordingMfb = FALSE;
pEntry->toTxMrq = TRUE;
pEntry->msiToTx = 0;/*has to increment whenever a mrq is sent */
pEntry->mrqCnt = 0;
pEntry->pendingMfsi = 0;
pEntry->toTxMfb = FALSE;
pEntry->mfbToTx = 0;
pEntry->mfb0 = 0;
pEntry->mfb1 = 0;
#endif /* MFB_SUPPORT */
pEntry->freqOffsetValid = FALSE;
#ifdef TXBF_SUPPORT
if (pAd->chipCap.FlgHwTxBfCap)
TxBFInit(pAd, pEntry, supportsETxBF);
#endif // TXBF_SUPPORT //
// Initialize Rate Adaptation
MlmeRAInit(pAd, pEntry);
/* Set asic auto fall back */
if (wdev->bAutoTxRateSwitch == TRUE)
{
UCHAR TableSize = 0;
MlmeSelectTxRateTable(pAd, pEntry, &pEntry->pTable, &TableSize, &pEntry->CurrTxRateIndex);
MlmeNewTxRate(pAd, pEntry);
pEntry->bAutoTxRateSwitch = TRUE;
#ifdef NEW_RATE_ADAPT_SUPPORT
if (! ADAPT_RATE_TABLE(pEntry->pTable))
#endif /* NEW_RATE_ADAPT_SUPPORT */
pEntry->HTPhyMode.field.ShortGI = GI_800;
}
else
{
pEntry->HTPhyMode.field.MCS = wdev->HTPhyMode.field.MCS;
pEntry->bAutoTxRateSwitch = FALSE;
/* If the legacy mode is set, overwrite the transmit setting of this entry. */
RTMPUpdateLegacyTxSetting((UCHAR)wdev->DesiredTransmitSetting.field.FixedTxMode, pEntry);
}
if (pEntry->AuthMode < Ndis802_11AuthModeWPA)
ApLogEvent(pAd, pEntry->Addr, EVENT_ASSOCIATED);
APUpdateCapabilityAndErpIe(pAd);
#ifdef DOT11_N_SUPPORT
APUpdateOperationMode(pAd);
#endif /* DOT11_N_SUPPORT */
pEntry->ReTryCounter = PEER_MSG1_RETRY_TIMER_CTR;
#ifdef HOSTAPD_SUPPORT
if((wdev->Hostapd == TRUE) &&
((wdev->AuthMode >= Ndis802_11AuthModeWPA) || wdev->IEEE8021X))
{
RtmpOSWrielessEventSendExt(pAd->net_dev, RT_WLAN_EVENT_EXPIRED,
-1, pEntry->Addr, NULL, 0,
((pEntry->CapabilityInfo & 0x0010) == 0 ? 0xFFFD : 0xFFFC));
}
#endif /*HOSTAPD_SUPPORT*/
return MLME_SUCCESS;
}
/*
==========================================================================
Description:
peer sends beacon back when scanning
==========================================================================
*/
VOID ApCliPeerProbeRspAction(
IN PRTMP_ADAPTER pAd,
IN MLME_QUEUE_ELEM *Elem)
{
PFRAME_802_11 pFrame;
UCHAR *VarIE = NULL;
USHORT LenVIE;
NDIS_802_11_VARIABLE_IEs *pVIE = NULL;
CHAR RealRssi = -127;
BCN_IE_LIST *ie_list = NULL;
/* allocate memory */
os_alloc_mem(NULL, (UCHAR **)&VarIE, MAX_VIE_LEN);
if (VarIE == NULL)
{
DBGPRINT(RT_DEBUG_ERROR, ("%s: Allocate memory fail!!!\n", __FUNCTION__));
goto LabelErr;
}
/* Init Variable IE structure */
pVIE = (PNDIS_802_11_VARIABLE_IEs) VarIE;
pVIE->Length = 0;
os_alloc_mem(NULL, (UCHAR **)&ie_list, sizeof(BCN_IE_LIST));
if (ie_list == NULL)
{
DBGPRINT(RT_DEBUG_ERROR, ("%s: Allocate ie_list fail!!!\n", __FUNCTION__));
goto LabelErr;
}
NdisZeroMemory(ie_list, sizeof(BCN_IE_LIST));
pFrame = (PFRAME_802_11) Elem->Msg;
if (PeerBeaconAndProbeRspSanity(pAd,
Elem->Msg,
Elem->MsgLen,
Elem->Channel,
ie_list,
&LenVIE,
pVIE))
{
ULONG Idx;
CHAR Rssi = -127;
RealRssi = RTMPMaxRssi(pAd, ConvertToRssi(pAd, Elem->Rssi0, RSSI_0, Elem->AntSel, BW_20), ConvertToRssi(pAd, Elem->Rssi1, RSSI_1, Elem->AntSel, BW_20), ConvertToRssi(pAd, Elem->Rssi2, RSSI_2, Elem->AntSel, BW_20));
#ifdef P2P_SUPPORT
MlmeEnqueue(pAd, P2P_DISC_STATE_MACHINE, P2P_DISC_PEER_PROB_RSP, Elem->MsgLen, Elem->Msg, ie_list->Channel);
#endif /* P2P_SUPPORT */
/* ignore BEACON not in this channel */
if (ie_list->Channel != pAd->MlmeAux.Channel
#ifdef DOT11_N_SUPPORT
#ifdef DOT11N_DRAFT3
&& (pAd->CommonCfg.bOverlapScanning == FALSE)
#endif /* DOT11N_DRAFT3 */
#endif /* DOT11_N_SUPPORT */
)
{
goto __End_Of_APPeerBeaconAtScanAction;
}
#ifdef DOT11_N_SUPPORT
if ((RealRssi > OBSS_BEACON_RSSI_THRESHOLD) && (ie_list->HtCapability.HtCapInfo.Forty_Mhz_Intolerant)) /* || (HtCapabilityLen == 0))) */
{
Handle_BSS_Width_Trigger_Events(pAd);
}
#endif /* DOT11_N_SUPPORT */
#ifdef IDS_SUPPORT
/* Conflict SSID detection */
if (ie_list->Channel == pAd->CommonCfg.Channel)
RTMPConflictSsidDetection(pAd, ie_list->Ssid, ie_list->SsidLen, Elem->Rssi0, Elem->Rssi1, Elem->Rssi2, Elem->AntSel);
#endif /* IDS_SUPPORT */
/*
This correct im-proper RSSI indication during SITE SURVEY issue.
Always report bigger RSSI during SCANNING when receiving multiple BEACONs from the same AP.
This case happens because BEACONs come from adjacent channels, so RSSI become weaker as we
switch to more far away channels.
*/
Idx = BssTableSearch(&pAd->ScanTab, ie_list->Bssid, ie_list->Channel);
if (Idx != BSS_NOT_FOUND)
Rssi = pAd->ScanTab.BssEntry[Idx].Rssi;
/* TODO: 2005-03-04 dirty patch. we should change all RSSI related variables to SIGNED SHORT for easy/efficient reading and calaulation */
RealRssi = RTMPMaxRssi(pAd, ConvertToRssi(pAd, Elem->Rssi0, RSSI_0, Elem->AntSel, BW_20), ConvertToRssi(pAd, Elem->Rssi1, RSSI_1, Elem->AntSel, BW_20), ConvertToRssi(pAd, Elem->Rssi2, RSSI_2, Elem->AntSel, BW_20));
if ((RealRssi + pAd->BbpRssiToDbmDelta) > Rssi)
Rssi = RealRssi + pAd->BbpRssiToDbmDelta;
Idx = BssTableSetEntry(pAd, &pAd->ScanTab, ie_list, -Rssi, LenVIE, pVIE);
if (Idx != BSS_NOT_FOUND)
{
NdisMoveMemory(pAd->ScanTab.BssEntry[Idx].PTSF, &Elem->Msg[24], 4);
NdisMoveMemory(&pAd->ScanTab.BssEntry[Idx].TTSF[0], &Elem->TimeStamp.u.LowPart, 4);
NdisMoveMemory(&pAd->ScanTab.BssEntry[Idx].TTSF[4], &Elem->TimeStamp.u.LowPart, 4);
}
}
/* sanity check fail, ignored */
__End_Of_APPeerBeaconAtScanAction:
/*scan beacon in pastive */
#ifdef CONFIG_AP_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
{
if (ie_list->Channel == pAd->ApCfg.AutoChannel_Channel)
{
if (AutoChBssSearchWithSSID(pAd, ie_list->Bssid, (PUCHAR)ie_list->Ssid, ie_list->SsidLen, ie_list->Channel) == BSS_NOT_FOUND)
pAd->pChannelInfo->ApCnt[pAd->ApCfg.current_channel_index]++;
AutoChBssInsertEntry(pAd, ie_list->Bssid, (CHAR *)ie_list->Ssid, ie_list->SsidLen, ie_list->Channel, ie_list->NewExtChannelOffset, RealRssi);
}
}
#endif /* CONFIG_AP_SUPPORT */
LabelErr:
if (VarIE != NULL)
os_free_mem(NULL, VarIE);
if (ie_list != NULL)
os_free_mem(NULL, ie_list);
}
