void SplashDialog::Show2( wxWindow * pParent )
{
if( pSelf == NULL )
{
pSelf = new SplashDialog( pParent );
}
pSelf->mpHtml->SetPage(HelpText( wxT("welcome") ));
pSelf->Show( true );
}
void LinkingHtmlWindow::OnLinkClicked(const wxHtmlLinkInfo& link)
{
wxString href = link.GetHref();
if( href.StartsWith(wxT("innerlink:")) )
{
this->SetPage( HelpText( href.Mid( 10 )));
this->GetParent()->SetLabel( TitleText( href.Mid( 10 )));
return;
}
OpenInDefaultBrowser(link);
}
void ErrorDialog::OnHelp(wxCommandEvent & WXUNUSED(event))
{
if( dhelpURL.StartsWith(wxT("innerlink:")) )
{
HelpSystem::ShowHtmlText(
this,
TitleText(dhelpURL.Mid( 10 ) ),
HelpText( dhelpURL.Mid( 10 )),
false,
true );
return;
}
OpenInDefaultBrowser( dhelpURL );
if(dClose)
EndModal(true);
}
void SplashDialog::Populate( ShuttleGui & S )
{
this->SetBackgroundColour(theTheme.Colour( clrAboutBoxBackground ));
bool bShow;
gPrefs->Read(wxT("/GUI/ShowSplashScreen"), &bShow, true );
S.StartVerticalLay(1);
//v For now, change to AudacityLogoWithName via old-fashioned ways, not Theme.
m_pLogo = new wxBitmap((const char **) AudacityLogoWithName_xpm); //v
// JKC: Resize to 50% of size. Later we may use a smaller xpm as
// our source, but this allows us to tweak the size - if we want to.
// It also makes it easier to revert to full size if we decide to.
const float fScale=0.5f;// smaller size.
wxImage RescaledImage( m_pLogo->ConvertToImage() );
// wxIMAGE_QUALITY_HIGH not supported by wxWidgets 2.6.1, or we would use it here.
RescaledImage.Rescale( int(LOGOWITHNAME_WIDTH * fScale), int(LOGOWITHNAME_HEIGHT *fScale) );
wxBitmap RescaledBitmap( RescaledImage );
m_pIcon =
new wxStaticBitmap(S.GetParent(), -1,
//*m_pLogo, //v theTheme.Bitmap(bmpAudacityLogoWithName),
RescaledBitmap,
wxDefaultPosition,
wxSize(int(LOGOWITHNAME_WIDTH*fScale), int(LOGOWITHNAME_HEIGHT*fScale)));
S.Prop(0).AddWindow( m_pIcon );
mpHtml = new LinkingHtmlWindow(S.GetParent(), -1,
wxDefaultPosition,
wxSize(506, 280),
wxHW_SCROLLBAR_AUTO | wxSUNKEN_BORDER );
mpHtml->SetPage(HelpText( wxT("welcome") ));
S.Prop(1).AddWindow( mpHtml, wxEXPAND );
S.Prop(0).StartMultiColumn(2, wxEXPAND);
S.SetStretchyCol( 1 );// Column 1 is stretchy...
{
S.SetBorder( 5 );
S.Id( DontShowID).AddCheckBox( _("Don't show this again at start up"), bShow ? wxT("false") : wxT("true") );
wxButton *ok = new wxButton(S.GetParent(), wxID_OK);
ok->SetDefault();
S.SetBorder( 5 );
S.Prop(0).AddWindow( ok, wxALIGN_RIGHT| wxALL );
}
S.EndVerticalLay();
}
void LinkingHtmlWindow::OnLinkClicked(const wxHtmlLinkInfo& link)
{
wxString href = link.GetHref();
if( href.StartsWith(wxT("innerlink:")) )
{
wxString FileName =
wxFileName( FileNames::HtmlHelpDir(), href.Mid( 10 ) + wxT(".htm") ).GetFullPath();
if( wxFileExists( FileName ) )
{
HelpSystem::ShowHelpDialog(NULL, FileName, wxT(""));
return;
}
else
{
SetPage( HelpText( href.Mid( 10 )));
wxGetTopLevelParent(this)->SetLabel( TitleText( href.Mid( 10 )));
}
}
else if( href.StartsWith(wxT("mailto:")) || href.StartsWith(wxT("file:")) )
{
OpenInDefaultBrowser( link );
return;
}
else if( !href.StartsWith( wxT("http:")) && !href.StartsWith( wxT("https:")) )
{
HtmlWindow::OnLinkClicked( link );
}
else
{
OpenInDefaultBrowser(link);
return;
}
BrowserFrame * pDlg = wxDynamicCast( GetRelatedFrame(), BrowserFrame );
if( pDlg )
{
pDlg->UpdateButtons();
};
}
void HelpSystem::ShowHelpDialog(wxWindow *parent,
const wxString &localFileName,
const wxString &remoteURL,
bool bModal)
{
AudacityProject * pProj = GetActiveProject();
wxString HelpMode = wxT("Local");
if( pProj )
{
HelpMode = pProj->mHelpPref;
// these next lines are for legacy cfg files (pre 2.0) where we had different modes
if( (HelpMode == wxT("Standard")) || (HelpMode == wxT("InBrowser")) )
{
HelpMode = wxT("Local");
pProj->mHelpPref = HelpMode;
gPrefs->Write(wxT("/GUI/Help"), HelpMode);
gPrefs->Flush();
}
}
// Anchors (URLs with a '#' in them) are not supported by many OSs for local file names
// See, for example, https://groups.google.com/forum/#!topic/wx-users/pC0uOZJalRQ
// Problems have been reported on Win, Mac and some versions of Linux.
// So we set HelpMode to use the internet if an anchor is found.
if (localFileName.Find('#', true) != wxNOT_FOUND)
HelpMode = wxT("FromInternet");
// Until a solution is found for this, the next few lines are irrelevant.
// Obtain the local file system file name, without the anchor if present.
wxString localfile;
if (localFileName.Find('#', true) != wxNOT_FOUND)
localfile = localFileName.BeforeLast('#');
else
localfile = localFileName;
if( (HelpMode == wxT("FromInternet")) && !remoteURL.IsEmpty() )
{
// Always go to remote URL. Use External browser.
OpenInDefaultBrowser( remoteURL );
}
else if( !wxFileExists( localfile ))
{
// If you give an empty remote URL, you should have already ensured
// that the file exists!
wxASSERT( !remoteURL.IsEmpty() );
// I can't find it'.
// Use Built-in browser to suggest you use the remote url.
wxString Text = HelpText( wxT("remotehelp") );
Text.Replace( wxT("*URL*"), remoteURL );
ShowHtmlText( parent, _("Help on the Internet"), Text, false, bModal );
}
else if( HelpMode == wxT("Local") )
{
// Local file, External browser
OpenInDefaultBrowser( wxString(wxT("file:"))+localFileName );
}
else
{
// Local file, Built-in browser
ShowHtmlText( parent, wxT(""), localFileName, true, bModal );
}
}
int main(int argc, char **argv)
{
char const *infile, *outfile;
char *prog;
FILE *fin, *fout;
Stream *in = NULL;
prog = argv[0];
while (argc > 0)
{
if (argc > 1 && argv[1][0] == '-')
{
if (strcmp(argv[1], "-help") == 0 || argv[1][1] == 'h')
{
HelpText(stdout, prog);
return 1;
}
if (strcmp(argv[1], "-dos") == 0 ||
strcmp(argv[1], "-crlf") == 0)
endline = DOS_CRLF;
else if (strcmp(argv[1], "-mac") == 0 ||
strcmp(argv[1], "-cr") == 0)
endline = MAC_CR;
else if (strcmp(argv[1], "-unix") == 0 ||
strcmp(argv[1], "-lf") == 0)
endline = UNIX_LF;
else if (strcmp(argv[1], "-tabs") == 0)
tabs = true;
else if (strncmp(argv[1], "-t", 2) == 0)
sscanf(argv[1]+2, "%d", &tabsize);
--argc;
++argv;
continue;
}
if (argc > 1)
{
infile = argv[1];
fin = fopen(infile, "rb");
}
else
{
infile = "stdin";
fin = stdin;
}
if (argc > 2)
{
outfile = argv[2];
fout = NULL;
--argc;
++argv;
}
else
{
outfile = "stdout";
fout = stdout;
}
if (fin)
{
in = ReadFile(fin);
if (fin != stdin)
fclose(fin);
if (fout != stdout)
fout = fopen(outfile, "wb");
if (fout)
{
WriteFile(in, fout);
if (fout != stdout)
fclose(fout);
}
else
fprintf(stderr, "%s - can't open \"%s\" for writing\n", prog, outfile);
FreeStream(in);
}
else
fprintf(stderr, "%s - can't open \"%s\" for reading\n", prog, infile);
--argc;
++argv;
if (argc <= 1)
break;
}
return 0;
}
void SplashDialog::Populate( ShuttleGui & S )
{
//#if ((AUDACITY_BRANDING == BRAND_JAMLING__EASY) || (AUDACITY_BRANDING == BRAND_JAMLING__FULL))
// this->SetBackgroundColour(wxColour(rrr, ggg, bbb)); // same as waveform color
//#else
// this->SetBackgroundColour(theTheme.Colour( clrAboutBoxBackground ));
//#endif
this->SetBackgroundColour(theTheme.Colour( clrAboutBoxBackground ));
bool bShow;
gPrefs->Read(wxT("/GUI/ShowSplashScreen"), &bShow, true );
S.StartVerticalLay(1);
wxImage buttonImageUp;
wxImage buttonImageOver;
wxSize buttonSize;
wxBitmap* pButtonBitmap;
wxBitmap* pButtonBitmapOver;
//vvv Change this compile flag when other brands are supported.
#if ((AUDACITY_BRANDING == BRAND_JAMLING__EASY) || (AUDACITY_BRANDING == BRAND_JAMLING__FULL))
//vvv Compiles only BRAND_JAMLING__EASY or BRAND_JAMLING__FULL
// because we don't load any other company_logo*_xpm consts yet.
pButtonBitmap = new wxBitmap(company_logo_xpm);
buttonImageUp = pButtonBitmap->ConvertToImage();
pButtonBitmapOver = new wxBitmap(company_logo_over_xpm);
buttonImageOver = pButtonBitmapOver->ConvertToImage();
buttonSize = wxSize(pButtonBitmap->GetWidth(), pButtonBitmap->GetHeight());
mButton_Logo =
new AButton(this, ID_BUTTON_LOGO,
wxDefaultPosition, buttonSize,
&buttonImageUp, &buttonImageOver,
&buttonImageUp, &buttonImageUp, //v other images?
true);
#else
//vvv For now, change to AudacityLogoWithName via old-fashioned ways, not Theme.
pButtonBitmap = //vvv theTheme.Bitmap(bmpAudacityLogoWithName)
new wxBitmap((const char **) AudacityLogoWithName_xpm);
buttonImageUp = pButtonBitmap->ConvertToImage();
// JKC: Resize to 50% of size. Later we may use a smaller xpm as
// our source, but this allows us to tweak the size - if we want to.
// It also makes it easier to revert to full size if we decide to.
const float fScale=0.5f;// smaller size.
buttonSize = wxSize(LOGOWITHNAME_WIDTH * fScale, LOGOWITHNAME_HEIGHT * fScale);
// wxIMAGE_QUALITY_HIGH not supported by wxWidgets 2.6.x, or we would use it here.
buttonImageUp.Rescale(buttonSize.GetWidth(), buttonSize.GetHeight());
buttonImageOver = buttonImageUp.Copy();
buttonImageOver.RotateHue(-0.01);
mButton_Logo =
new AButton(this, ID_BUTTON_LOGO,
wxDefaultPosition, buttonSize,
&buttonImageUp, &buttonImageOver,
&buttonImageUp, &buttonImageUp, //v other images?
true);
#endif
S.Prop(0).AddWindow(mButton_Logo);
mpHtml = new LinkingHtmlWindow(S.GetParent(), -1,
wxDefaultPosition,
wxSize(kWidth, 280),
wxHW_SCROLLBAR_AUTO | wxSUNKEN_BORDER );
mpHtml->SetPage(HelpText( wxT("welcome") ));
S.Prop(1).AddWindow( mpHtml, wxEXPAND );
S.Prop(0).StartMultiColumn(2, wxEXPAND);
S.SetStretchyCol( 1 );// Column 1 is stretchy...
{
S.SetBorder( 5 );
S.Id( DontShowID).AddCheckBox( _("Don't show this again at start up"), bShow ? wxT("false") : wxT("true") );
wxButton *ok = new wxButton(S.GetParent(), wxID_OK);
ok->SetDefault();
ok->SetFocus();
S.SetBorder( 5 );
S.Prop(0).AddWindow( ok, wxALIGN_RIGHT| wxALL );
}
S.EndVerticalLay();
}
