uint32 writeSequencerBoard(void)
{
uint32 status = I2C_TRANSFER_ERROR;
I2CM_I2CMasterWriteBuf(SEQUENCER_I2C_SLAVE_ADDRESS,
sequencerWrBuffer,
SEQUENCER_I2C_WR_BUFFER_SIZE,
I2CM_I2C_MODE_COMPLETE_XFER
);
while (0u == (I2CM_I2CMasterStatus() & I2CM_I2C_MSTAT_WR_CMPLT))
{
/* Waits until master completes read transfer */
}
/* Displays transfer status */
if (0u == (I2CM_I2C_MSTAT_ERR_XFER & I2CM_I2CMasterStatus()))
{
RGB_LED_ON_GREEN;
/* Check if all bytes was written */
if (I2CM_I2CMasterGetWriteBufSize() == SEQUENCER_I2C_WR_BUFFER_SIZE)
{
status = I2C_TRANSFER_CMPLT;
}
}
else
{
RGB_LED_ON_RED;
}
(void) I2CM_I2CMasterClearStatus();
return status;
}
uint32 LCD_Write(uint8 *buffer)
{
uint32 status = I2C_TRANSFER_ERROR;
I2CM_I2CMasterWriteBuf(LCD_I2C_SLAVE_ADDRESS,
buffer,
LCD_I2C_PACKET_SIZE,
I2CM_I2C_MODE_COMPLETE_XFER
);
while (0u == (I2CM_I2CMasterStatus() & I2CM_I2C_MSTAT_WR_CMPLT))
{
/* Waits until master completes write transfer */
}
/* Displays transfer status */
if (0u == (I2CM_I2C_MSTAT_ERR_XFER & I2CM_I2CMasterStatus()))
{
RGB_LED_ON_GREEN;
/* Check if all bytes was written */
if(I2CM_I2CMasterGetWriteBufSize() == LCD_I2C_BUFFER_SIZE)
{
status = I2C_TRANSFER_CMPLT;
// １命令ごとに余裕を見て50usウェイトします。
CyDelayUs(50);
}
}
else
{
RGB_LED_ON_RED;
}
(void) I2CM_I2CMasterClearStatus();
return (status);
}
uint8 Camera_read(void)
{
uint32 status = I2CM_I2C_MSTR_NO_ERROR;
uint8 rxdata[16] = {0};
I2CM_I2CMasterClearStatus();
//IR sensor read
status = I2CM_I2CMasterSendStart(IRslaveAddress, 0);
if (status != I2CM_I2C_MSTR_NO_ERROR)
{return 0;}
status = I2CM_I2CMasterWriteByte(0x36);
if (status != I2CM_I2C_MSTR_NO_ERROR)
{return 0;}
status = I2CM_I2CMasterSendStop();
if (status != I2CM_I2C_MSTR_NO_ERROR)
{return 0;}
CyDelayUs(10);
status = I2CM_I2CMasterReadBuf(IRslaveAddress, &rxdata[0], 16, I2CM_I2C_MODE_COMPLETE_XFER);
if (status != I2CM_I2C_MSTR_NO_ERROR)
{return 0;}
while(I2CM_I2CMasterStatus() != I2CM_I2C_MSTAT_RD_CMPLT);
for (i=0; i<16; i++)
{
data_buf[i]=0;
data_buf[i] = rxdata[i];
}
blobcount = 0;
Blob1.X = data_buf[1];
Blob1.Y = data_buf[2];
s = data_buf[3];
Blob1.X += (s & 0x30) <<4;
Blob1.Y += (s & 0xC0) <<2;
Blob1.Size = (s & 0x0F);
// At the moment we're using the size of the blob to determine if one is detected, either X,Y, or size could be used.
blobcount |= (Blob1.Size < 15)? BLOB1 : 0;
Blob2.X = data_buf[4];
Blob2.Y = data_buf[5];
s = data_buf[6];
Blob2.X += (s & 0x30) <<4;
Blob2.Y += (s & 0xC0) <<2;
Blob2.Size = (s & 0x0F);
blobcount |= (Blob2.Size < 15)? BLOB2 : 0;
Blob3.X = data_buf[7];
Blob3.Y = data_buf[8];
s = data_buf[9];
Blob3.X += (s & 0x30) <<4;
Blob3.Y += (s & 0xC0) <<2;
Blob3.Size = (s & 0x0F);
blobcount |= (Blob3.Size < 15)? BLOB3 : 0;
Blob4.X = data_buf[10];
Blob4.Y = data_buf[11];
s = data_buf[12];
Blob4.X += (s & 0x30) <<4;
Blob4.Y += (s & 0xC0) <<2;
Blob4.Size = (s & 0x0F);
blobcount |= (Blob4.Size < 15)? BLOB4 : 0;
return blobcount;
}