void initI2CModule(void)
{
unsigned int flags = EUSCI_B_I2C_TRANSMIT_INTERRUPT0 |
EUSCI_B_I2C_RECEIVE_INTERRUPT0 |
EUSCI_B_I2C_TRANSMIT_INTERRUPT1 |
EUSCI_B_I2C_RECEIVE_INTERRUPT1 |
EUSCI_B_I2C_STOP_INTERRUPT |
EUSCI_B_I2C_NAK_INTERRUPT;
#if 0
/* Select Port B1 for I2C - Set Pin 4, 5 to input Primary Module Function,
* (UCB1SIMO/UCB1SDA, UCB1SOMI/UCB1SCL).
*/
GPIO_setAsPeripheralModuleFunctionInputPin(GPIO_PORT_P6,
GPIO_PIN4 + GPIO_PIN5, GPIO_PRIMARY_MODULE_FUNCTION);
/* eUSCI I2C Slave Configuration */
I2C_initSlave(EUSCI_B1_BASE, SLAVE_ADDRESS, EUSCI_B_I2C_OWN_ADDRESS_OFFSET0,
EUSCI_B_I2C_OWN_ADDRESS_ENABLE);
I2C_initSlave(EUSCI_B1_BASE, 0xC, EUSCI_B_I2C_OWN_ADDRESS_OFFSET1,
EUSCI_B_I2C_OWN_ADDRESS_ENABLE);
I2C_setMode(EUSCI_B1_BASE, EUSCI_B_I2C_RECEIVE_MODE);
/* Enable the module and enable interrupts */
I2C_enableModule(EUSCI_B1_BASE);
MAP_I2C_clearInterruptFlag(EUSCI_B1_BASE, EUSCI_B_I2C_RECEIVE_INTERRUPT0);
MAP_I2C_enableInterrupt(EUSCI_B1_BASE, EUSCI_B_I2C_RECEIVE_INTERRUPT0);
MAP_Interrupt_enableInterrupt(INT_EUSCIB1);
#else
/* eUSCI I2C Slave Configuration */
I2C_initSlave(EUSCI_B0_BASE, SLAVE_ADDRESS, EUSCI_B_I2C_OWN_ADDRESS_OFFSET0,
EUSCI_B_I2C_OWN_ADDRESS_ENABLE);
#if 1
I2C_initSlave(EUSCI_B0_BASE, 0xC, EUSCI_B_I2C_OWN_ADDRESS_OFFSET1,
EUSCI_B_I2C_OWN_ADDRESS_ENABLE);
#endif
/* Select Port B2 for I2C - Set Pin 6, 7 to input Primary Module Function
*/
MAP_GPIO_setAsPeripheralModuleFunctionInputPin(GPIO_PORT_P1,
GPIO_PIN6 | GPIO_PIN7, GPIO_PRIMARY_MODULE_FUNCTION);
/* Define the SMbus alert pin */
MAP_GPIO_setOutputHighOnPin(GPIO_PORT_P5, GPIO_PIN0);
MAP_GPIO_setAsOutputPin(GPIO_PORT_P5, GPIO_PIN0);
I2C_setMode(EUSCI_B0_BASE, EUSCI_B_I2C_RECEIVE_MODE);
/* Enable the module and enable interrupts */
I2C_enableModule(EUSCI_B0_BASE);
MAP_I2C_clearInterruptFlag(EUSCI_B0_BASE, flags);
MAP_Interrupt_setPriority(INT_EUSCIB0, configMAX_SYSCALL_INTERRUPT_PRIORITY);
MAP_I2C_enableInterrupt(EUSCI_B0_BASE, flags);
MAP_Interrupt_enableInterrupt(INT_EUSCIB0);
#endif
}
struct I2C_module* configCompass()
{
// initialize I2C0 for compass
struct I2C_module* Compass;
volatile WORD test = 0;
BYTE dat[3];
Compass = I2C_masterModule(0,'b',0x0C);
dat[0] = 0x4F;
I2C_enableModule(Compass, ENABLE);
#ifndef COMMS_DISCONNECTED
I2C_sendDataBytes(Compass,0x42, dat, 1);
writeEeprom(Compass, 0x06, 0x0F); // set compass to average 16 times
writeEeprom(Compass, 0x08, 0x72); // set to continuous mode, 20HZ, Periodic set/reset
#endif
return Compass;
}
