Esempi in C++ (Cpp) per IS_SDIO_WAIT

Esempio n. 1

File: stm32f10x_sdio.c Progetto: NexusIF/WorkspaceBackup

/**
  * @brief  Initializes the SDIO Command according to the specified 
  *         parameters in the SDIO_CmdInitStruct and send the command.
  * @param  SDIO_CmdInitStruct : pointer to a SDIO_CmdInitTypeDef 
  *         structure that contains the configuration information for the SDIO command.
  * @retval None
  */
void SDIO_SendCommand(SDIO_CmdInitTypeDef *SDIO_CmdInitStruct)
{
  uint32_t tmpreg = 0;
  
  /* Check the parameters */
  assert_param(IS_SDIO_CMD_INDEX(SDIO_CmdInitStruct->SDIO_CmdIndex));
  assert_param(IS_SDIO_RESPONSE(SDIO_CmdInitStruct->SDIO_Response));
  assert_param(IS_SDIO_WAIT(SDIO_CmdInitStruct->SDIO_Wait));
  assert_param(IS_SDIO_CPSM(SDIO_CmdInitStruct->SDIO_CPSM));
  
/*---------------------------- SDIO ARG Configuration ------------------------*/
  /* Set the SDIO Argument value */
  SDIO->ARG = SDIO_CmdInitStruct->SDIO_Argument;
  
/*---------------------------- SDIO CMD Configuration ------------------------*/  
  /* Get the SDIO CMD value */
  tmpreg = SDIO->CMD;
  /* Clear CMDINDEX, WAITRESP, WAITINT, WAITPEND, CPSMEN bits */
  tmpreg &= CMD_CLEAR_MASK;
  /* Set CMDINDEX bits according to SDIO_CmdIndex value */
  /* Set WAITRESP bits according to SDIO_Response value */
  /* Set WAITINT and WAITPEND bits according to SDIO_Wait value */
  /* Set CPSMEN bits according to SDIO_CPSM value */
  tmpreg |= (uint32_t)SDIO_CmdInitStruct->SDIO_CmdIndex | SDIO_CmdInitStruct->SDIO_Response
           | SDIO_CmdInitStruct->SDIO_Wait | SDIO_CmdInitStruct->SDIO_CPSM;
  
  /* Write to SDIO CMD */
  SDIO->CMD = tmpreg;
}

Esempio n. 2

File: stm32f4xx_ll_sdmmc.c Progetto: 0x00f/stm32

/**
  * @brief  Configure the SDIO command path according to the specified parameters in
  *         SDIO_CmdInitTypeDef structure and send the command 
  * @param  SDIOx: Pointer to SDIO register base
  * @param  SDIO_CmdInitStruct: pointer to a SDIO_CmdInitTypeDef structure that contains 
  *         the configuration information for the SDIO command
  * @retval HAL status
  */
HAL_StatusTypeDef SDIO_SendCommand(SDIO_TypeDef *SDIOx, SDIO_CmdInitTypeDef *SDIO_CmdInitStruct)
{
  uint32_t tmpreg = 0;
  
  /* Check the parameters */
  assert_param(IS_SDIO_CMD_INDEX(SDIO_CmdInitStruct->CmdIndex));
  assert_param(IS_SDIO_RESPONSE(SDIO_CmdInitStruct->Response));
  assert_param(IS_SDIO_WAIT(SDIO_CmdInitStruct->WaitForInterrupt));
  assert_param(IS_SDIO_CPSM(SDIO_CmdInitStruct->CPSM));

  /* Set the SDIO Argument value */
  SDIOx->ARG = SDIO_CmdInitStruct->Argument;
  
  /* SDIO CMD Configuration */  
  /* Get the SDIO CMD value */
  tmpreg = SDIOx->CMD;
  
  /* Clear CMDINDEX, WAITRESP, WAITINT, WAITPEND, CPSMEN bits */
  tmpreg &= CMD_CLEAR_MASK;
  
  /* Set SDIO command parameters */
  tmpreg |= (uint32_t)(SDIO_CmdInitStruct->CmdIndex         |\
                       SDIO_CmdInitStruct->Response         |\
                       SDIO_CmdInitStruct->WaitForInterrupt |\
                       SDIO_CmdInitStruct->CPSM);
  
  /* Write to SDIO CMD register */
  SDIOx->CMD = tmpreg;
  
  return HAL_OK;  
}

Esempio n. 3

File: stm32f1xx_ll_sdmmc.c Progetto: Seeed-Studio/Grove_LED_Matrix_Driver

/**
  * @brief  Configure the SDIO command path according to the specified parameters in
  *         SDIO_CmdInitTypeDef structure and send the command 
  * @param  SDIOx: Pointer to SDIO register base
  * @param  Command: pointer to a SDIO_CmdInitTypeDef structure that contains 
  *         the configuration information for the SDIO command
  * @retval HAL status
  */
HAL_StatusTypeDef SDIO_SendCommand(SDIO_TypeDef *SDIOx, SDIO_CmdInitTypeDef *Command)
{
  /* Check the parameters */
  assert_param(IS_SDIO_CMD_INDEX(Command->CmdIndex));
  assert_param(IS_SDIO_RESPONSE(Command->Response));
  assert_param(IS_SDIO_WAIT(Command->WaitForInterrupt));
  assert_param(IS_SDIO_CPSM(Command->CPSM));

  /* Set the SDIO Argument value */
  SDIOx->ARG = Command->Argument;

  /* Set SDIO command parameters */
  /* Write to SDIO CMD register */
  MODIFY_REG(SDIOx->CMD, CMD_CLEAR_MASK, Command->CmdIndex         |\
                                          Command->Response         |\
                                          Command->WaitForInterrupt |\
                                          Command->CPSM); 
  
  return HAL_OK;  
}

Esempio n. 4

File: stm32f2xx_ll_sdmmc.c Progetto: AlessandroA/mbed

/**
  * @brief  Configure the SDIO command path according to the specified parameters in
  *         SDIO_CmdInitTypeDef structure and send the command 
  * @param  SDIOx: Pointer to SDIO register base
  * @param  SDIO_CmdInitStruct: pointer to a SDIO_CmdInitTypeDef structure that contains 
  *         the configuration information for the SDIO command
  * @retval HAL status
  */
HAL_StatusTypeDef SDIO_SendCommand(SDIO_TypeDef *SDIOx, SDIO_CmdInitTypeDef *SDIO_CmdInitStruct)
{
  uint32_t tmpreg = 0;
  
  /* Check the parameters */
  assert_param(IS_SDIO_CMD_INDEX(SDIO_CmdInitStruct->CmdIndex));
  assert_param(IS_SDIO_RESPONSE(SDIO_CmdInitStruct->Response));
  assert_param(IS_SDIO_WAIT(SDIO_CmdInitStruct->WaitForInterrupt));
  assert_param(IS_SDIO_CPSM(SDIO_CmdInitStruct->CPSM));

  /* Set the SDIO Argument value */
  SDIOx->ARG = SDIO_CmdInitStruct->Argument;

  /* Set SDIO command parameters */
  tmpreg |= (uint32_t)(SDIO_CmdInitStruct->CmdIndex         |\
                       SDIO_CmdInitStruct->Response         |\
                       SDIO_CmdInitStruct->WaitForInterrupt |\
                       SDIO_CmdInitStruct->CPSM);
  
  /* Write to SDIO CMD register */
  MODIFY_REG(SDIOx->CMD, CMD_CLEAR_MASK, tmpreg); 
  
  return HAL_OK;  
}