/**
* @brief Disable the specified TMRB channel.
* @param TBx: Select the TMRB channel.
* This parameter can be one of the following values:
* TSB_TB0, TSB_TB1, TSB_TB2, TSB_TB3, TSB_TB4, TSB_TB5, TSB_TB6, TSB_TB7.
* @retval None
*/
void TMRB_Disable(TSB_TB_TypeDef * TBx)
{
/* Check the parameters */
assert_param(IS_TMRB_ALL_PERIPH(TBx));
/* Clear TBxEN<TBEN> to disable TBx */
TBx->EN &= EN_TBEN_CLEAR;
}
/**
* @brief Enable the specified TMRB channel.
* @param TBx: Select the TMRB channel.
* This parameter can be one of the following values:
* TSB_TB0, TSB_TB1, TSB_TB2, TSB_TB3, TSB_TB4, TSB_TB5, TSB_TB6, TSB_TB7.
* @retval None
*/
void TMRB_Enable(TSB_TB_TypeDef * TBx)
{
/* Check the parameters */
assert_param(IS_TMRB_ALL_PERIPH(TBx));
/* Set TBxEN<TBEN> to enable TBx */
TBx->EN |= EN_TBEN_SET;
}
/**
* @brief Get up-counter value of TBx.
* @param TBx: Select the TMRB channel.
* This parameter can be one of the following values:
* TSB_TB0, TSB_TB1, TSB_TB2, TSB_TB3, TSB_TB4, TSB_TB5, TSB_TB6, TSB_TB7.
* @retval Up-counter value of TBx
*/
uint16_t TMRB_GetUpCntValue(TSB_TB_TypeDef * TBx)
{
/* Check the parameters */
assert_param(IS_TMRB_ALL_PERIPH(TBx));
/* Return up-counter value */
return (uint16_t) TBx->UC;
}
/**
* @brief Capture counter by software and take them into capture register 0.
* @param TBx: Select the TMRB channel.
* This parameter can be one of the following values:
* TSB_TB0, TSB_TB1, TSB_TB2, TSB_TB3, TSB_TB4, TSB_TB5, TSB_TB6, TSB_TB7.
* @retval None
*/
void TMRB_ExecuteSWCapture(TSB_TB_TypeDef * TBx)
{
/* Check the parameters */
assert_param(IS_TMRB_ALL_PERIPH(TBx));
/* Set software capture */
TBx->MOD &= MOD_TBCP_CLEAR;
}
/**
* @brief Get TMRB register value of TBx.
* @param TBx: Select the TMRB channel.
* This parameter can be one of the following values:
* TSB_TB0, TSB_TB1, TSB_TB2, TSB_TB3,
* TSB_TB4, TSB_TB5, TSB_TB6, TSB_TB7.
* @param Reg: Select the timer register to read.
* This parameter can be: TMRB_REG_0 or TMRB_REG_1.
* @retval Register value of TBx
*/
uint16_t TMRB_GetRegisterValue(TSB_TB_TypeDef * TBx, uint8_t Reg)
{
/* Check the parameters */
assert_param(IS_TMRB_ALL_PERIPH(TBx));
assert_param(IS_TMRB_REG(Reg));
return Reg ? (uint16_t) TBx->RG1 : (uint16_t) TBx->RG0;
}
/**
* @brief Get TMRB capture value of TBx.
* @param TBx: Select the TMRB channel.
* This parameter can be one of the following values:
* TSB_TB0, TSB_TB1, TSB_TB2, TSB_TB3, TSB_TB4, TSB_TB5, TSB_TB6, TSB_TB7,
* TSB_TB8 or TSB_TB9.
* @param CapReg: Select the capture register to read.
* This parameter can be: TMRB_CAPTURE_0 or TMRB_CAPTURE_1.
* @retval Capture value of TBx
*/
uint16_t TMRB_GetCaptureValue(TSB_TB_TypeDef * TBx, uint8_t CapReg)
{
/* Check the parameters */
assert_param(IS_TMRB_ALL_PERIPH(TBx));
assert_param(IS_TMRB_CAPTURE_REG(CapReg));
return CapReg ? (uint16_t) TBx->CP1 : (uint16_t) TBx->CP0;
}
/**
* @brief Start or stop counter of the specified TMRB channel.
* @param TBx: Select the TMRB channel.
* This parameter can be one of the following values:
* TSB_TB0, TSB_TB1, TSB_TB2, TSB_TB3, TSB_TB4, TSB_TB5, TSB_TB6, TSB_TB7.
* @param Cmd: The command for the counter.
* This parameter can be TMRB_RUN or TMRB_STOP.
* @retval None
*/
void TMRB_SetRunState(TSB_TB_TypeDef * TBx, uint32_t Cmd)
{
/* Check the parameters */
assert_param(IS_TMRB_ALL_PERIPH(TBx));
assert_param(IS_TMRB_CMD(Cmd));
/* Write command into RUN register */
TBx->RUN = Cmd;
}
/**
* @brief Mask some TMRB interrupt.
* @param TBx: Select the TMRB channel.
* This parameter can be one of the following values:
* TSB_TB0, TSB_TB1, TSB_TB2, TSB_TB3, TSB_TB4, TSB_TB5, TSB_TB6, TSB_TB7.
* @param INTMask: Select the mask of TMRB interrupt.
* This parameter can be one of the following values:
* TMRB_NO_INT_MASK, TMRB_MASK_MATCH_DUTY_INT, TMRB_MASK_MATCH_CYCLE_INT,
* or TMRB_MASK_OVERFLOW_INT.
* @retval None
*/
void TMRB_SetINTMask(TSB_TB_TypeDef * TBx, uint32_t INTMask)
{
/* Check the parameters */
assert_param(IS_TMRB_ALL_PERIPH(TBx));
assert_param(IS_TMRB_INT_MASK(INTMask));
/* Mask the specified interrupt */
TBx->IM = INTMask;
}
/**
* @brief Change trailingtiming value of TBx.
* @param TBx: Select the TMRB channel.
* This parameter can be one of the following values:
* TSB_TB0, TSB_TB1, TSB_TB2, TSB_TB3,
* TSB_TB4, TSB_TB5, TSB_TB6, TSB_TB7.
* @param TrailingTiming: New trailingtiming value, max 0xFFFF.
* @retval None
*/
void TMRB_ChangeTrailingTiming(TSB_TB_TypeDef * TBx, uint32_t TrailingTiming)
{
/* Check the parameters */
assert_param(IS_TMRB_ALL_PERIPH(TBx));
assert_param(IS_TMRB_VALUE(TrailingTiming));
assert_param(IS_VALID_LEADINGTIMING(TBx->RG0, TrailingTiming));
/* Write trailingtiming into RG1 */
TBx->RG1 = TrailingTiming;
}
/**
* @brief Change leadingtiming value of TBx.
* @param TBx: Select the TMRB channel.
* This parameter can be one of the following values:
* TSB_TB0, TSB_TB1, TSB_TB2, TSB_TB3,
* TSB_TB4, TSB_TB5, TSB_TB6, TSB_TB7.
* @param LeadingTiming: New leadingtiming value, max 0xFFFF.
* @retval None
*/
void TMRB_ChangeLeadingTiming(TSB_TB_TypeDef * TBx, uint32_t LeadingTiming)
{
/* Check the parameters */
assert_param(IS_TMRB_ALL_PERIPH(TBx));
assert_param(IS_TMRB_VALUE(LeadingTiming));
assert_param(IS_VALID_LEADINGTIMING(LeadingTiming, TBx->RG1));
/* Write leadingtiming into RG0 */
TBx->RG0 = LeadingTiming;
}
/**
* @brief Indicate what causes the interrupt.
* @param TBx: Select the TMRB channel.
* This parameter can be one of the following values:
* TSB_TB0, TSB_TB1, TSB_TB2, TSB_TB3,
* TSB_TB4, TSB_TB5, TSB_TB6, TSB_TB7.
* @retval The interrupt factor of TBx.
*/
TMRB_INTFactor TMRB_GetINTFactor(TSB_TB_TypeDef * TBx)
{
TMRB_INTFactor retval = { 0U };
/* Check the parameters */
assert_param(IS_TMRB_ALL_PERIPH(TBx));
retval.All = TBx->ST & TB_ST_MASK;
return retval;
}
/**
* @brief Change cycle value of TBx.
* @param TBx: Select the TMRB channel.
* This parameter can be one of the following values:
* TSB_TB0, TSB_TB1, TSB_TB2, TSB_TB3, TSB_TB4, TSB_TB5, TSB_TB6, TSB_TB7.
* @param Cycle: New cycle value, max 0xFFFF.
* @retval None
*/
void TMRB_ChangeCycle(TSB_TB_TypeDef * TBx, uint32_t Cycle)
{
/* Check the parameters */
assert_param(IS_TMRB_ALL_PERIPH(TBx));
assert_param(IS_TMRB_VALUE(Cycle));
assert_param(IS_VALID_DUTY(TBx->RG0, Cycle));
/* Write cycle into RG1 */
TBx->RG1 = Cycle;
}
/**
* @brief Indicate what interrupt cause source be masked.
* @param TBx: Select the TMRB channel.
* This parameter can be one of the following values:
* TSB_TB0, TSB_TB1, TSB_TB2, TSB_TB3,
* TSB_TB4, TSB_TB5, TSB_TB6, TSB_TB7.
* @retval The masked interrupt cause source of TBx.
*/
TMRB_INTMask TMRB_GetINTMask(TSB_TB_TypeDef * TBx)
{
TMRB_INTMask retval = { 0U };
/* Check the parameters */
assert_param(IS_TMRB_ALL_PERIPH(TBx));
retval.All = TBx->IM & TB_IM_MASK;
return retval;
}
/**
* @brief Change duty value of TBx.
* @param TBx: Select the TMRB channel.
* This parameter can be one of the following values:
* TSB_TB0, TSB_TB1, TSB_TB2, TSB_TB3, TSB_TB4, TSB_TB5, TSB_TB6, TSB_TB7.
* @param Duty: New duty value, max 0xFFFF.
* @retval None
*/
void TMRB_ChangeDuty(TSB_TB_TypeDef * TBx, uint32_t Duty)
{
/* Check the parameters */
assert_param(IS_TMRB_ALL_PERIPH(TBx));
assert_param(IS_TMRB_VALUE(Duty));
assert_param(IS_VALID_DUTY(Duty, TBx->RG1));
/* Write duty into RG0 */
TBx->RG0 = Duty;
}
/**
* @brief Configure the flip-flop function.
* @param TBx: Select the TMRB channel.
* This parameter can be one of the following values:
* TSB_TB0, TSB_TB1, TSB_TB2, TSB_TB3, TSB_TB4, TSB_TB5, TSB_TB6, TSB_TB7,
* TSB_TB8 or TSB_TB9.
* @param FFStruct: The structure containing TMRB flip-flop configuration
* @retval None
*/
void TMRB_SetFlipFlop(TSB_TB_TypeDef * TBx, TMRB_FFOutputTypeDef * FFStruct)
{
/* Check the parameters */
assert_param(IS_POINTER_NOT_NULL(FFStruct));
assert_param(IS_TMRB_ALL_PERIPH(TBx));
assert_param(IS_TMRB_FLIPFLOP_CTRL(FFStruct->FlipflopCtrl));
assert_param(IS_TMRB_FLIPFLOP_TRG(FFStruct->FlipflopReverseTrg));
/* Configure the flip-flop function of TBx */
TBx->FFCR = (FFStruct->FlipflopCtrl | FFStruct->FlipflopReverseTrg);
}
/**
* @brief Capture counter by software and take them into capture register 0.
* @param TBx: Select the TMRB channel.
* This parameter can be one of the following values:
* TSB_TB0, TSB_TB1, TSB_TB2, TSB_TB3, TSB_TB4, TSB_TB5, TSB_TB6, TSB_TB7, TSB_TB8, TSB_TB9.
* @retval None
*/
void TMRB_ExecuteSWCapture(TSB_TB_TypeDef * TBx)
{
uint32_t tmp = 0U;
/* Check the parameters */
assert_param(IS_TMRB_ALL_PERIPH(TBx));
/* Set software capture */
tmp = TBx->MOD;
tmp &= MOD_BIT7_CLEAR;
TBx->MOD = tmp & MOD_TBCP_CLEAR;
}
/**
* @brief Controls the external inputs.
* @param TBx: Select the TMRB channel.
* This parameter can be one of the following values:
* TSB_TB0, TSB_TB1, TSB_TB2, TSB_TB3, TSB_TB4, TSB_TB5, TSB_TB6, TSB_TB7, TSB_TB8, TSB_TB9.
* @retval None
*/
void TMRB_SetExtInput(TSB_TB_TypeDef * TBx)
{
uint32_t tmp = 0U;
/* Check the parameters */
assert_param(IS_TMRB_ALL_PERIPH(TBx));
/* Set TBxCR<TBINSEL> */
tmp = TBx->CR;
tmp &= CR_BIT6_CLEAR;
tmp &= CR_TBINSEL_CLEAR;
TBx->CR = tmp;
}
void TMRB_SetClkInCoreHalt(TSB_TB_TypeDef * TBx, uint8_t ClkState)
{
/* Check the parameters */
assert_param(IS_TMRB_ALL_PERIPH(TBx));
assert_param(IS_TMRB_CLK_IN_CORE_HALT(ClkState));
if (ClkState == TMRB_STOP_IN_CORE_HALT) {
/* Set TBEN<TBHALT> */
TBx->EN |= (uint32_t) TMRB_STOP_IN_CORE_HALT;
} else {
/* Clear TBEN<TBHALT> */
TBx->EN &= ~(uint32_t) TMRB_STOP_IN_CORE_HALT;
}
}
/**
* @brief Enable or disable TMRB when system is in idle mode.
* @param TBx: Select the TMRB channel.
* This parameter can be one of the following values:
* TSB_TB0, TSB_TB1, TSB_TB2, TSB_TB3, TSB_TB4, TSB_TB5, TSB_TB6, TSB_TB7.
* @param NewState: New state of TMRB in system idle mode.
* This parameter can be ENABLE or DISABLE.
* @retval None
*/
void TMRB_SetIdleMode(TSB_TB_TypeDef * TBx, FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_TMRB_ALL_PERIPH(TBx));
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState == ENABLE) {
/* Set TBxCR<I2TB> to enable TBx in system idle mode */
TBx->CR |= CR_I2TB_SET;
} else {
/* Clear TBxCR<I2TB> to disable TBx in system idle mode */
TBx->CR &= CR_I2TB_CLEAR;
}
}
/**
* @brief Enable or disable double buffer of TBx.
* @param TBx: Select the TMRB channel.
* This parameter can be one of the following values:
* TSB_TB0, TSB_TB1, TSB_TB2, TSB_TB3, TSB_TB4, TSB_TB5, TSB_TB6, TSB_TB7,
* TSB_TB8 or TSB_TB9.
* @param NewState: New state of TBx double buffer.
* This parameter can be ENABLE or DISABLE.
* @retval None
*/
void TMRB_SetDoubleBuf(TSB_TB_TypeDef * TBx, FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_TMRB_ALL_PERIPH(TBx));
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState == ENABLE) {
/* Set TBxCR<TBWBF> to enable TBx double buffer */
TBx->CR |= CR_TBWBF_SET;
} else {
/* Clear TBxCR<TBWBF> to disable TBx double buffer */
TBx->CR &= CR_TBWBF_CLEAR;
}
}
/**
* @brief Enable or disable DMA request.
* @param TBx: Select the TMRB channel.
* This parameter can be one of the following values:
* TSB_TB0, TSB_TB1, TSB_TB2, TSB_TB3, TSB_TB4, TSB_TB5, TSB_TB6, TSB_TB7, TSB_TB8, TSB_TB9.
* @param NewState: New state of DMA request.
* This parameter can be ENABLE or DISABLE.
* @param DMAReq: DMA request.
* This parameter can be TMRB_DMA_REQ_CMP_MATCH, TMRB_DMA_REQ_CAPTURE_1 or TMRB_DMA_REQ_CAPTURE_0.
* @retval None
*/
void TMRB_SetDMAReq(TSB_TB_TypeDef * TBx, FunctionalState NewState, uint8_t DMAReq)
{
/* Check the parameters */
assert_param(IS_TMRB_ALL_PERIPH(TBx));
assert_param(IS_TMRB_DMA_REQ(DMAReq));
if (NewState == ENABLE) {
/* set TBxDMA<TBDMAENn>(n can be 0,1,2) */
TBx->DMA |= (uint32_t) DMAReq;
} else {
/* clear TBxDMA<TBDMAENn>(n can be 0,1,2) */
TBx->DMA &= ~((uint32_t) DMAReq);
}
}
/**
* @brief Configure the capture timing.
* @param TBx: Select the TMRB channel.
* This parameter can be one of the following values:
* TSB_TB0, TSB_TB1, TSB_TB2, TSB_TB3, TSB_TB4, TSB_TB5, TSB_TB6, TSB_TB7, TSB_TB8, TSB_TB9.
* @param CaptureTiming: Specify TMRB capture timing.
* This parameter can be one of the following values:
* TMRB_DISABLE_CAPTURE, TMRB_CAPTURE_IN_RISING,
* TMRB_CAPTURE_IN_RISING_FALLING,TMRB_CAPTURE_OUTPUT_EDGE.
* @retval None
*/
void TMRB_SetCaptureTiming(TSB_TB_TypeDef * TBx, uint32_t CaptureTiming)
{
uint32_t tmp = 0U;
/* Check the parameters */
assert_param(IS_TMRB_ALL_PERIPH(TBx));
assert_param(IS_TMRB_CAPTURE_TIMING(CaptureTiming));
/* Configure capture timing */
tmp = TBx->MOD;
tmp &= MOD_BIT7_CLEAR;
tmp &= MOD_TBCPM_CLEAR;
tmp |= CaptureTiming;
tmp |= MOD_TBCP_SET;
TBx->MOD = tmp;
}
/**
* @brief Controls the external inputs.
* @param TBx: Select the TMRB channel.
* This parameter can be one of the following values:
* TSB_TB0, TSB_TB1, TSB_TB2, TSB_TB3, TSB_TB4, TSB_TB5, TSB_TB6, TSB_TB7, TSB_TB8, TSB_TB9.
* @param ExtInput: Active the external inputs.
* This parameter can be TMRB_EXT_INPUT_TBxIN or TMRB_EXT_INPUT_PHCxIN.
* @retval None
*/
void TMRB_SetExtInput(TSB_TB_TypeDef * TBx, uint8_t ExtInput)
{
uint32_t tmp = 0U;
/* Check the parameters */
assert_param(IS_TMRB_EXT_INPUT_SEL(ExtInput));
/* TMRB0 and TMRB1 do not have capture function of two pulse counter input. */
if (TMRB_EXT_INPUT_PHCxIN == ExtInput) {
assert_param(IS_TMRB_PHCNT_CAPTURE_PERIPH(TBx));
} else {
assert_param(IS_TMRB_ALL_PERIPH(TBx));
}
/* Set TBxCR<TBINSEL> */
tmp = TBx->CR;
tmp &= CR_TBINSEL_CLEAR;
tmp |= (uint32_t) ExtInput;
TBx->CR = tmp;
}
/**
* @brief Select source clock ¦ÕT0 .
* @param TBx: Select the TMRB channel.
* This parameter can be one of the following values:
* TSB_TB0, TSB_TB1, TSB_TB2, TSB_TB3, TSB_TB4, TSB_TB5, TSB_TB6, TSB_TB7,TSB_TB8,TSB_TB9.
* @param NewState: New state of TBx source clock select.
* This parameter can be ENABLE or DISABLE.
* @retval None
*/
void TMRB_SetFT0Sel(TSB_TB_TypeDef * TBx, FunctionalState NewState)
{
uint32_t tmp = 0U;
/* Check the parameters */
assert_param(IS_TMRB_ALL_PERIPH(TBx));
assert_param(IS_FUNCTIONAL_STATE(NewState));
tmp = TBx->CR;
tmp &= CR_BIT6_CLEAR;
if (NewState == ENABLE) {
/* Set TBxCR<FT0SEL> to make TBx select ¦ÕT0 as source clock */
TBx->CR = tmp | CR_FT0SEL_SET;
} else {
/* Clear TBxCR<TBSYNC> to make TBx select except ¦ÕT0 as source clock */
TBx->CR = tmp & CR_FT0SEL_CLEAR;
}
}
/**
* @brief Enable or disable double buffer of TBx and set the timing to write to timer register.
* @param TBx: Select the TMRB channel.
* This parameter can be one of the following values:
* TSB_TB0, TSB_TB1, TSB_TB2, TSB_TB3, TSB_TB4, TSB_TB5, TSB_TB6, TSB_TB7.
* @param NewState: New state of TBx double buffer.
* This parameter can be ENABLE or DISABLE.
* @param WriteRegMode: Timing to write to timer register.
* This parameter can be TMRB_WRITE_REG_SEPARATE or TMRB_WRITE_REG_SIMULTANEOUS.
* @retval None
*/
void TMRB_SetDoubleBuf(TSB_TB_TypeDef * TBx, FunctionalState NewState, uint8_t WriteRegMode)
{
uint32_t tmp = 0U;
/* Check the parameters */
assert_param(IS_TMRB_ALL_PERIPH(TBx));
assert_param(IS_FUNCTIONAL_STATE(NewState));
assert_param(IS_TMRB_WRITE_REG_MODE(WriteRegMode));
if (NewState == ENABLE) {
/* Set TBxCR<TBWBF> to enable TBx double buffer */
TBx->CR |= CR_TBWBF_SET;
} else {
/* Clear TBxCR<TBWBF> to disable TBx double buffer */
TBx->CR &= CR_TBWBF_CLEAR;
}
/* Write timer register timing */
tmp = TBx->MOD & MOD_TBRSWR_CLEAR;
tmp |= (uint32_t) WriteRegMode;
TBx->MOD = tmp;
}
/**
* @brief Initialize the specified TMRB channel.
* @param TBx: Select the TMRB channel.
* This parameter can be one of the following values:
* TSB_TB0, TSB_TB1, TSB_TB2, TSB_TB3, TSB_TB4, TSB_TB5, TSB_TB6, TSB_TB7, TSB_TB8, TSB_TB9.
* @param InitStruct: The structure containing basic TMRB configuration.
* @retval None
*/
void TMRB_Init(TSB_TB_TypeDef * TBx, TMRB_InitTypeDef * InitStruct)
{
uint32_t tmp = 0U;
/* Check the parameters */
assert_param(IS_POINTER_NOT_NULL(InitStruct));
assert_param(IS_TMRB_ALL_PERIPH(TBx));
assert_param(IS_TMRB_MODE(InitStruct->Mode));
if (InitStruct->Mode != 0U) {
assert_param(IS_TMRB_CLK_DIV(InitStruct->ClkDiv));
} else {
/* Do nothing */
}
assert_param(IS_TMRB_VALUE(InitStruct->Cycle));
assert_param(IS_TMRB_UC_CTRL(InitStruct->UpCntCtrl));
assert_param(IS_TMRB_VALUE(InitStruct->Duty));
assert_param(IS_VALID_DUTY(InitStruct->Duty, InitStruct->Cycle));
/* Configure source clock for TBx */
tmp = TBx->MOD;
tmp &= MOD_BIT7_CLEAR;
tmp &= MOD_CLK_CLE_CLEAR;
if (InitStruct->Mode != 0U) {
/* Use internal clock, set the prescaler */
tmp |= InitStruct->ClkDiv;
} else {
/* Use external clock */
tmp |= InitStruct->Mode;
}
/* Set up-counter running mode */
tmp |= InitStruct->UpCntCtrl;
tmp |= MOD_TBCP_SET;
TBx->MOD = tmp;
/* Write duty into RG0 */
TBx->RG0 = InitStruct->Duty;
/* Write cycle into RG1 */
TBx->RG1 = InitStruct->Cycle;
}
/**
* @brief Enable or disable external trigger to start count and set the active edge.
* @param TBx: Select the TMRB channel.
* This parameter can be one of the following values:
* TSB_TB0, TSB_TB1, TSB_TB2, TSB_TB3, TSB_TB4, TSB_TB5, TSB_TB6, TSB_TB7, TSB_TB8, TSB_TB9.
* @param NewState: New state of external trigger.
* This parameter can be ENABLE or DISABLE.
* @param TrgMode: Active edge of the external trigger signal.
* This parameter can be TMRB_TRG_EDGE_RISING or TMRB_TRG_EDGE_FALLING.
* @retval None
*/
void TMRB_SetExtStartTrg(TSB_TB_TypeDef * TBx, FunctionalState NewState, uint8_t TrgMode)
{
uint32_t tmp = 0U;
/* Check the parameters */
assert_param(IS_TMRB_ALL_PERIPH(TBx));
assert_param(IS_FUNCTIONAL_STATE(NewState));
assert_param(IS_TMRB_TRG_EDGE(TrgMode));
tmp = TBx->CR;
tmp &= CR_BIT6_CLEAR;
if (NewState == ENABLE) {
/* Set TBxCR<CSSEL> to choose external trigger */
tmp |= CR_CSSEL_SET;
} else {
/* Clear TBxCR<CSSEL> to choose software start */
tmp &= CR_CSSEL_CLEAR;
}
/* external trigger selection */
tmp &= CR_TRGSEL_CLEAR;
tmp |= (uint32_t) TrgMode;
TBx->CR = tmp;
}
