void Init(void)
{
__disable_interrupt();
ENABLE_LCD_LED();
DISABLE_LCD_POWER();
/* clear shipping mode, if set to allow configuration */
PMMCTL0_H = PMMPW_H;
PM5CTL0 &= ~LOCKLPM5;
PMMCTL0_H = 0x00;
/* disable DMA during read-modify-write cycles */
DMACTL4 = DMARMWDIS;
#ifdef BOOTLOADER
/*
* enable RAM alternate interrupt vectors
* these are defined in AltVect.s43 and copied to RAM by cstartup
*/
SYSCTL |= SYSRIVECT;
ClearBootloaderSignature();
#else
SaveResetSource();
#endif
SetupClockAndPowerManagementModule();
CheckResetCode();
if (niReset != NORMAL_RESET_CODE)
{
InitProperty();
}
InitBufferPool(); // message queue
InitBattery();
CheckClip();
PrintF("*** %s:%s", niReset == FLASH_RESET_CODE ? "FLASH" :
(niReset == MASTER_RESET_CODE ? "MASTER" : "NORMAL"), niBuild);
ShowWatchdogInfo();
WhoAmI();
/* timer for battery checking at a regular frequency. */
StartTimer(BatteryTimer);
InitVibration();
InitRealTimeClock(); // enable rtc interrupt
LcdPeripheralInit();
DrawSplashScreen();
SerialRamInit();
/* turn the radio on; initialize the serial port profile or BLE/GATT */
CreateAndSendMessage(TurnRadioOnMsg, MSG_OPT_NONE);
DISABLE_LCD_LED();
}
static void InitDisplay(void)
{
__disable_interrupt();
ENABLE_LCD_LED();
DISABLE_LCD_POWER();
/* clear shipping mode, if set to allow configuration */
PMMCTL0_H = PMMPW_H;
PM5CTL0 &= ~LOCKLPM5;
PMMCTL0_H = 0x00;
/* disable DMA during read-modify-write cycles */
DMACTL4 = DMARMWDIS;
#if BOOTLOADER
/*
* enable RAM alternate interrupt vectors
* these are defined in AltVect.s43 and copied to RAM by cstartup
*/
SYSCTL |= SYSRIVECT;
ClearBootloaderSignature();
#endif
SetupClockAndPowerManagementModule();
CheckClip(); // enable debuguart
__enable_interrupt();
PrintF("\r\n*** %s:%c%c%c ***", (niResetType == NORMAL_RESET ? "NORMAL" : "MASTER"),
BUILD[0], BUILD[1], BUILD[2]);
if (niResetType != NORMAL_RESET) InitStateLog();
SaveStateLog();
WhoAmI();
ShowStateInfo();
InitAdc();
/* timer for battery checking at a regular frequency. */
StartTimer(BatteryTimer);
InitVibration();
InitRealTimeClock(); // enable rtc interrupt
LcdPeripheralInit();
DrawSplashScreen();
InitSerialRam();
/* turn the radio on; initialize the serial port profile or BLE/GATT */
SendMessage(TurnRadioOnMsg, MSG_OPT_NONE);
DISABLE_LCD_LED();
}
