/*
* @implemented
*/
VOID
NTAPI
KeInitializeTimer(OUT PKTIMER Timer)
{
/* Call the New Function */
KeInitializeTimerEx(Timer, NotificationTimer);
}
NTSTATUS InitializeEventing(CEncoderDevice* pEncDevice)
{
// First, allocate buffers
NTSTATUS ntStatus = STATUS_SUCCESS;
if(!EventHandler)
{
EventHandler = (PEventHandlerData)ExAllocatePoolWithTag(NonPagedPool,
sizeof(EventHandlerData), MS_SAMPLE_ANALOG_POOL_TAG);
if (!EventHandler) {
ntStatus = STATUS_UNSUCCESSFUL;
return ntStatus;
}
pEncDevice->EventData = reinterpret_cast<PVOID>(EventHandler);
KeInitializeEvent(&(EventHandler->InitEvent),
SynchronizationEvent,
FALSE);
KeInitializeEvent(&(EventHandler->TuneEvent),
SynchronizationEvent,
FALSE);
KeInitializeEvent(&(EventHandler->ThreadEvent),
SynchronizationEvent,
FALSE);
KeInitializeSpinLock(&(EventHandler->LockAccess));
KeInitializeDpc (&(EventHandler->DPCObject), reinterpret_cast <PKDEFERRED_ROUTINE>(TimerDpcInterrupt), EventHandler);
KeInitializeTimerEx(&(EventHandler->timer), SynchronizationTimer);
}
KeClearEvent(&(EventHandler->InitEvent));
KeClearEvent(&(EventHandler->TuneEvent));
KeClearEvent(&(EventHandler->ThreadEvent));
return ntStatus;
}
VOID
KiInitializeInterruptTimers(
VOID
)
{
LARGE_INTEGER DueTime;
//
// If not timing ISRs, nothing to do.
//
if (KiTimeLimitIsrMicroseconds == 0) {
return;
}
//
// The kernel is initialized. Use a timer to determine the amount
// the Time Stamp Counter advances by in 10 seconds, then use that
// result to set the ISR time limit.
//
if ((KeFeatureBits & KF_RDTSC) == 0) {
//
// Processor doesn't support the RDTSC instruction, don't attempt
// to time ISRs.
//
return;
}
KiIsrTimerInit = ExAllocatePoolWithTag(NonPagedPool,
sizeof(*KiIsrTimerInit),
' eK');
if (KiIsrTimerInit == NULL) {
//
// Couldn't allocate memory for timer? Skip ISR timing.
//
return;
}
KeInitializeTimerEx(&KiIsrTimerInit->SampleTimer, SynchronizationTimer);
KeInitializeDpc(&KiIsrTimerInit->Dpc, &KiInitializeInterruptTimersDpc, NULL);
//
// Relative time in 100 nanoseconds = 10 seconds.
//
DueTime.QuadPart = -(10 * 10 * 1000 * 1000);
KeSetTimerEx(&KiIsrTimerInit->SampleTimer,
DueTime, //
10000, // repeat in 10 seconds.
&KiIsrTimerInit->Dpc);
}
int lkl_env_init(unsigned long mem_size)
{
HANDLE init_thread_handle, timer_thread_handle;
NTSTATUS status;
nops.phys_mem_size=mem_size;
KeInitializeTimerEx(&timer, SynchronizationTimer);
KeInitializeSemaphore(&init_sem, 0, 100);
KeInitializeSemaphore(&timer_killer_sem, 0, 100);
/* create the initial thread */
status = PsCreateSystemThread(&init_thread_handle, THREAD_ALL_ACCESS,
NULL, NULL, NULL, init_thread, NULL);
if (status != STATUS_SUCCESS)
goto err;
/* wait for the initial thread to complete initialization to
* be able to interact with it */
status = KeWaitForSingleObject(&init_sem, Executive, KernelMode, FALSE, NULL);
if (status != STATUS_SUCCESS)
goto close_init_thread;
/* create the timer thread responsible with delivering timer interrupts */
status = PsCreateSystemThread(&timer_thread_handle, THREAD_ALL_ACCESS,
NULL, NULL, NULL, timer_thread, NULL);
if (status != STATUS_SUCCESS)
goto close_init_thread;
/* get references to the init and timer threads to be able to wait on them */
status = ObReferenceObjectByHandle(init_thread_handle, THREAD_ALL_ACCESS,
NULL, KernelMode, &init_thread_obj, NULL);
if (!NT_SUCCESS(status))
goto close_timer_thread;
status = ObReferenceObjectByHandle(timer_thread_handle, THREAD_ALL_ACCESS,
NULL, KernelMode, &timer_thread_obj, NULL);
if (!NT_SUCCESS(status))
goto deref_init_thread_obj;
/* we don't need the handles, we have access to the objects */
ZwClose(timer_thread_handle);
ZwClose(init_thread_handle);
return STATUS_SUCCESS;
deref_init_thread_obj:
ObDereferenceObject(init_thread_obj);
close_timer_thread:
ZwClose(timer_thread_handle);
close_init_thread:
ZwClose(init_thread_handle);
err:
return status;
}
// Sleep
void SlSleep(int milliSeconds)
{
PKTIMER timer = SlMalloc(sizeof(KTIMER));
LARGE_INTEGER duetime;
duetime.QuadPart = (__int64)milliSeconds * -10000;
KeInitializeTimerEx(timer, NotificationTimer);
KeSetTimerEx(timer, duetime, 0, NULL);
KeWaitForSingleObject(timer, Executive, KernelMode, FALSE, NULL);
SlFree(timer);
}
static
VOID
TestTimerFunctional(
IN PKTIMER Timer,
IN TIMER_TYPE Type,
IN KIRQL OriginalIrql)
{
PKTHREAD Thread = KeGetCurrentThread();
memset(Timer, 0x55, sizeof *Timer);
KeInitializeTimerEx(Timer, Type);
CheckTimer(Timer, TimerNotificationObject + Type, 0L, FALSE, OriginalIrql, (PVOID *)NULL, 0);
}
VOID
DokanTimeoutThread(
PDokanDCB Dcb)
/*++
Routine Description:
checks wheter pending IRP is timeout or not each DOKAN_CHECK_INTERVAL
--*/
{
NTSTATUS status;
KTIMER timer;
PVOID pollevents[2];
LARGE_INTEGER timeout = {0};
BOOLEAN waitObj = TRUE;
DDbgPrint("==> DokanTimeoutThread\n");
KeInitializeTimerEx(&timer, SynchronizationTimer);
pollevents[0] = (PVOID)&Dcb->KillEvent;
pollevents[1] = (PVOID)&timer;
KeSetTimerEx(&timer, timeout, DOKAN_CHECK_INTERVAL, NULL);
while (waitObj) {
status = KeWaitForMultipleObjects(2, pollevents, WaitAny,
Executive, KernelMode, FALSE, NULL, NULL);
if (!NT_SUCCESS(status) || status == STATUS_WAIT_0) {
DDbgPrint(" DokanTimeoutThread catched KillEvent\n");
// KillEvent or something error is occured
waitObj = FALSE;
} else {
ReleaseTimeoutPendingIrp(Dcb);
if (Dcb->UseKeepAlive)
DokanCheckKeepAlive(Dcb);
}
}
KeCancelTimer(&timer);
DDbgPrint("<== DokanTimeoutThread\n");
PsTerminateSystemThread(STATUS_SUCCESS);
}
VOID
NTAPI
INIT_FUNCTION
PoInitializePrcb(IN PKPRCB Prcb)
{
/* Initialize the Power State */
RtlZeroMemory(&Prcb->PowerState, sizeof(Prcb->PowerState));
Prcb->PowerState.Idle0KernelTimeLimit = 0xFFFFFFFF;
Prcb->PowerState.CurrentThrottle = 100;
Prcb->PowerState.CurrentThrottleIndex = 0;
Prcb->PowerState.IdleFunction = PopIdle0;
/* Initialize the Perf DPC and Timer */
KeInitializeDpc(&Prcb->PowerState.PerfDpc, PopPerfIdleDpc, Prcb);
KeSetTargetProcessorDpc(&Prcb->PowerState.PerfDpc, Prcb->Number);
KeInitializeTimerEx(&Prcb->PowerState.PerfTimer, SynchronizationTimer);
}
VOID
INIT_FUNCTION
NTAPI
MiInitBalancerThread(VOID)
{
KPRIORITY Priority;
NTSTATUS Status;
#if !defined(__GNUC__)
LARGE_INTEGER dummyJunkNeeded;
dummyJunkNeeded.QuadPart = -20000000; /* 2 sec */
;
#endif
KeInitializeEvent(&MiBalancerEvent, SynchronizationEvent, FALSE);
KeInitializeTimerEx(&MiBalancerTimer, SynchronizationTimer);
KeSetTimerEx(&MiBalancerTimer,
#if defined(__GNUC__)
(LARGE_INTEGER)(LONGLONG)-20000000LL, /* 2 sec */
#else
dummyJunkNeeded,
#endif
2000, /* 2 sec */
NULL);
Status = PsCreateSystemThread(&MiBalancerThreadHandle,
THREAD_ALL_ACCESS,
NULL,
NULL,
&MiBalancerThreadId,
(PKSTART_ROUTINE) MiBalancerThread,
NULL);
if (!NT_SUCCESS(Status))
{
KeBugCheck(MEMORY_MANAGEMENT);
}
Priority = LOW_REALTIME_PRIORITY + 1;
NtSetInformationThread(MiBalancerThreadHandle,
ThreadPriority,
&Priority,
sizeof(Priority));
}
NTSTATUS
CMiniportWaveRTStream::Init
(
_In_ PCMiniportWaveRT Miniport_,
_In_ PPORTWAVERTSTREAM PortStream_,
_In_ ULONG Pin_,
_In_ BOOLEAN Capture_,
_In_ PKSDATAFORMAT DataFormat_,
_In_ GUID SignalProcessingMode
)
/*++
Routine Description:
Initializes the stream object.
Arguments:
Miniport_ -
Pin_ -
Capture_ -
DataFormat -
SignalProcessingMode - The driver uses the signalProcessingMode to configure
driver and/or hardware specific signal processing to be applied to this new
stream.
Return Value:
NT status code.
--*/
{
PAGED_CODE();
PWAVEFORMATEX pWfEx = NULL;
NTSTATUS ntStatus = STATUS_SUCCESS;
m_pMiniport = NULL;
m_ulPin = 0;
m_bUnregisterStream = FALSE;
m_bCapture = FALSE;
m_ulDmaBufferSize = 0;
m_pDmaBuffer = NULL;
m_KsState = KSSTATE_STOP;
m_pTimer = NULL;
m_pDpc = NULL;
m_ullPlayPosition = 0;
m_ullWritePosition = 0;
m_ullDmaTimeStamp = 0;
m_hnsElapsedTimeCarryForward = 0;
m_ulDmaMovementRate = 0;
m_bLfxEnabled = FALSE;
m_pbMuted = NULL;
m_plVolumeLevel = NULL;
m_plPeakMeter = NULL;
m_pWfExt = NULL;
m_ullLinearPosition = 0;
m_ulContentId = 0;
m_ulCurrentWritePosition = 0;
m_IsCurrentWritePositionUpdated = 0;
#ifdef SYSVAD_BTH_BYPASS
m_ScoOpen = FALSE;
#endif // SYSVAD_BTH_BYPASS
m_pPortStream = PortStream_;
InitializeListHead(&m_NotificationList);
m_ulNotificationIntervalMs = 0;
m_pNotificationDpc = (PRKDPC)ExAllocatePoolWithTag(
NonPagedPoolNx,
sizeof(KDPC),
MINWAVERTSTREAM_POOLTAG);
if (!m_pNotificationDpc)
{
return STATUS_INSUFFICIENT_RESOURCES;
}
m_pNotificationTimer = (PKTIMER)ExAllocatePoolWithTag(
NonPagedPoolNx,
sizeof(KTIMER),
MINWAVERTSTREAM_POOLTAG);
if (!m_pNotificationTimer)
{
return STATUS_INSUFFICIENT_RESOURCES;
}
KeInitializeDpc(m_pNotificationDpc, TimerNotifyRT, this);
KeInitializeTimerEx(m_pNotificationTimer, NotificationTimer);
pWfEx = GetWaveFormatEx(DataFormat_);
if (NULL == pWfEx)
{
return STATUS_UNSUCCESSFUL;
}
m_pMiniport = reinterpret_cast<CMiniportWaveRT*>(Miniport_);
if (m_pMiniport == NULL)
{
return STATUS_INVALID_PARAMETER;
}
m_pMiniport->AddRef();
if (!NT_SUCCESS(ntStatus))
{
return ntStatus;
}
m_ulPin = Pin_;
m_bCapture = Capture_;
m_ulDmaMovementRate = pWfEx->nAvgBytesPerSec;
m_pDpc = (PRKDPC)ExAllocatePoolWithTag(NonPagedPoolNx, sizeof(KDPC), MINWAVERTSTREAM_POOLTAG);
if (!m_pDpc)
{
return STATUS_INSUFFICIENT_RESOURCES;
}
m_pWfExt = (PWAVEFORMATEXTENSIBLE)ExAllocatePoolWithTag(NonPagedPoolNx, sizeof(WAVEFORMATEX) + pWfEx->cbSize, MINWAVERTSTREAM_POOLTAG);
if (m_pWfExt == NULL)
{
return STATUS_INSUFFICIENT_RESOURCES;
}
RtlCopyMemory(m_pWfExt, pWfEx, sizeof(WAVEFORMATEX) + pWfEx->cbSize);
m_pbMuted = (PBOOL)ExAllocatePoolWithTag(NonPagedPoolNx, m_pWfExt->Format.nChannels * sizeof(BOOL), MINWAVERTSTREAM_POOLTAG);
if (m_pbMuted == NULL)
{
return STATUS_INSUFFICIENT_RESOURCES;
}
RtlZeroMemory(m_pbMuted, m_pWfExt->Format.nChannels * sizeof(BOOL));
m_plVolumeLevel = (PLONG)ExAllocatePoolWithTag(NonPagedPoolNx, m_pWfExt->Format.nChannels * sizeof(LONG), MINWAVERTSTREAM_POOLTAG);
if (m_plVolumeLevel == NULL)
{
return STATUS_INSUFFICIENT_RESOURCES;
}
RtlZeroMemory(m_plVolumeLevel, m_pWfExt->Format.nChannels * sizeof(LONG));
m_plPeakMeter = (PLONG)ExAllocatePoolWithTag(NonPagedPoolNx, m_pWfExt->Format.nChannels * sizeof(LONG), MINWAVERTSTREAM_POOLTAG);
if (m_plPeakMeter == NULL)
{
return STATUS_INSUFFICIENT_RESOURCES;
}
RtlZeroMemory(m_plPeakMeter, m_pWfExt->Format.nChannels * sizeof(LONG));
if (m_bCapture)
{
DWORD toneFrequency = 0;
if (!m_pMiniport->IsRenderDevice())
{
//
// Init sine wave generator. To exercise the SignalProcessingMode parameter
// this sample driver selects the frequency based on the parameter.
//
toneFrequency = IsEqualGUID(SignalProcessingMode, AUDIO_SIGNALPROCESSINGMODE_RAW) ? 1000 : 2000;
}
else
{
//
// Loopbacks pins use a different frequency for test validation.
//
ASSERT(Pin_ == m_pMiniport->GetLoopbackPinId());
toneFrequency = 3000; // 3 kHz
}
ntStatus = m_ToneGenerator.Init(toneFrequency, m_pWfExt);
if (!NT_SUCCESS(ntStatus))
{
return ntStatus;
}
}
else if (!g_DoNotCreateDataFiles)
{
//
// Create an output file for the render data.
//
DPF(D_TERSE, ("SaveData %p", &m_SaveData));
ntStatus = m_SaveData.SetDataFormat(DataFormat_);
if (NT_SUCCESS(ntStatus))
{
ntStatus = m_SaveData.Initialize(m_pMiniport->IsOffloadSupported() ? (Pin_ == m_pMiniport->GetOffloadPinId()) : FALSE);
}
if (!NT_SUCCESS(ntStatus))
{
return ntStatus;
}
}
//
// Register this stream.
//
ntStatus = m_pMiniport->StreamCreated(m_ulPin, this);
if (NT_SUCCESS(ntStatus))
{
m_bUnregisterStream = TRUE;
}
return ntStatus;
} // Init
NTSTATUS NTAPI
AfdSelect( PDEVICE_OBJECT DeviceObject, PIRP Irp,
PIO_STACK_LOCATION IrpSp ) {
NTSTATUS Status = STATUS_NO_MEMORY;
PAFD_FCB FCB;
PFILE_OBJECT FileObject;
PAFD_POLL_INFO PollReq = Irp->AssociatedIrp.SystemBuffer;
PAFD_DEVICE_EXTENSION DeviceExt = DeviceObject->DeviceExtension;
KIRQL OldIrql;
UINT i, Signalled = 0;
ULONG Exclusive = PollReq->Exclusive;
UNREFERENCED_PARAMETER(IrpSp);
AFD_DbgPrint(MID_TRACE,("Called (HandleCount %u Timeout %d)\n",
PollReq->HandleCount,
(INT)(PollReq->Timeout.QuadPart)));
SET_AFD_HANDLES(PollReq,
LockHandles( PollReq->Handles, PollReq->HandleCount ));
if( !AFD_HANDLES(PollReq) ) {
Irp->IoStatus.Status = STATUS_NO_MEMORY;
Irp->IoStatus.Information = 0;
IoCompleteRequest( Irp, IO_NETWORK_INCREMENT );
return STATUS_NO_MEMORY;
}
if( Exclusive ) {
for( i = 0; i < PollReq->HandleCount; i++ ) {
if( !AFD_HANDLES(PollReq)[i].Handle ) continue;
KillSelectsForFCB( DeviceExt,
(PFILE_OBJECT)AFD_HANDLES(PollReq)[i].Handle,
TRUE );
}
}
KeAcquireSpinLock( &DeviceExt->Lock, &OldIrql );
for( i = 0; i < PollReq->HandleCount; i++ ) {
if( !AFD_HANDLES(PollReq)[i].Handle ) continue;
FileObject = (PFILE_OBJECT)AFD_HANDLES(PollReq)[i].Handle;
FCB = FileObject->FsContext;
AFD_DbgPrint(MID_TRACE, ("AFD: Select Events: "));
PrintEvents( PollReq->Handles[i].Events );
AFD_DbgPrint(MID_TRACE,("\n"));
PollReq->Handles[i].Status =
PollReq->Handles[i].Events & FCB->PollState;
if( PollReq->Handles[i].Status ) {
AFD_DbgPrint(MID_TRACE,("Signalling %p with %x\n",
FCB, FCB->PollState));
Signalled++;
}
}
if( Signalled ) {
Status = STATUS_SUCCESS;
Irp->IoStatus.Status = Status;
SignalSocket( NULL, Irp, PollReq, Status );
} else {
PAFD_ACTIVE_POLL Poll = NULL;
Poll = ExAllocatePool( NonPagedPool, sizeof(AFD_ACTIVE_POLL) );
if (Poll){
Poll->Irp = Irp;
Poll->DeviceExt = DeviceExt;
Poll->Exclusive = Exclusive;
KeInitializeTimerEx( &Poll->Timer, NotificationTimer );
KeInitializeDpc( (PRKDPC)&Poll->TimeoutDpc, SelectTimeout, Poll );
InsertTailList( &DeviceExt->Polls, &Poll->ListEntry );
KeSetTimer( &Poll->Timer, PollReq->Timeout, &Poll->TimeoutDpc );
Status = STATUS_PENDING;
IoMarkIrpPending( Irp );
(void)IoSetCancelRoutine(Irp, AfdCancelHandler);
} else {
AFD_DbgPrint(MAX_TRACE, ("FIXME: do something with the IRP!\n"));
Status = STATUS_NO_MEMORY;
}
}
KeReleaseSpinLock( &DeviceExt->Lock, OldIrql );
AFD_DbgPrint(MID_TRACE,("Returning %x\n", Status));
return Status;
}
static NTSTATUS
V4vAddDevice(PDRIVER_OBJECT driverObject, PDEVICE_OBJECT pdo)
{
NTSTATUS status = STATUS_SUCCESS;
UNICODE_STRING deviceName;
PDEVICE_OBJECT fdo = NULL;
PXENV4V_EXTENSION pde = NULL;
LONG val;
BOOLEAN symlink = FALSE;
LARGE_INTEGER seed;
WCHAR *szSddl = NULL;
UNICODE_STRING sddlString;
CHAR *szFpath = NULL;
TraceVerbose(("====> '%s'.\n", __FUNCTION__));
// We only allow one instance of this device type. If more than on pdo is created we need
val = InterlockedCompareExchange(&g_deviceCreated, 1, 0);
if (val != 0) {
TraceWarning(("cannot instantiate more that one v4v device node.\n"));
return STATUS_UNSUCCESSFUL;
}
do {
// Create our device
RtlInitUnicodeString(&deviceName, V4V_DEVICE_NAME);
szSddl = g_win5Sddl;
RtlInitUnicodeString(&sddlString, szSddl);
status =
IoCreateDeviceSecure(driverObject,
sizeof(XENV4V_EXTENSION),
&deviceName,
FILE_DEVICE_UNKNOWN,
FILE_DEVICE_SECURE_OPEN,
FALSE,
&sddlString,
(LPCGUID)&GUID_SD_XENV4V_CONTROL_OBJECT,
&fdo);
if (!NT_SUCCESS(status)) {
TraceError(("failed to create device object - error: 0x%x\n", status));
fdo = NULL;
break;
}
pde = (PXENV4V_EXTENSION)fdo->DeviceExtension;
RtlZeroMemory(pde, sizeof(XENV4V_EXTENSION));
RtlStringCchCopyW(pde->symbolicLinkText, XENV4V_SYM_NAME_LEN, V4V_SYMBOLIC_NAME);
RtlInitUnicodeString(&pde->symbolicLink, pde->symbolicLinkText);
// Create our symbolic link
status = IoCreateSymbolicLink(&pde->symbolicLink, &deviceName);
if (!NT_SUCCESS(status)) {
TraceError(("failed to create symbolic - error: 0x%x\n", status));
break;
}
symlink = TRUE;
// Get our xenstore path
szFpath = xenbus_find_frontend(pdo);
if (szFpath == NULL) {
status = STATUS_NO_SUCH_DEVICE;
TraceError(("failed to locate XenStore front end path\n"));
break;
}
// Setup the extension
pde->magic = XENV4V_MAGIC;
pde->pdo = pdo;
pde->fdo = fdo;
IoInitializeRemoveLock(&pde->removeLock, 'v4vx', 0, 0);
pde->frontendPath = szFpath;
szFpath = NULL;
pde->state = XENV4V_DEV_STOPPED; // wait for start
pde->lastPoState = PowerSystemWorking;
pde->virqPort = null_EVTCHN_PORT();
KeInitializeDpc(&pde->virqDpc, V4vVirqNotifyDpc, fdo);
KeInitializeSpinLock(&pde->virqLock);
KeInitializeSpinLock(&pde->dpcLock);
KeInitializeTimerEx(&pde->timer, NotificationTimer);
KeInitializeDpc(&pde->timerDpc,
V4vConnectTimerDpc,
fdo);
KeInitializeSpinLock(&pde->timerLock);
pde->timerCounter = 0;
InitializeListHead(&pde->contextList);
KeInitializeSpinLock(&pde->contextLock);
pde->contextCount = 0;
InitializeListHead(&pde->ringList);
KeInitializeSpinLock(&pde->ringLock);
InitializeListHead(&pde->pendingIrpQueue);
pde->pendingIrpCount = 0;
KeInitializeSpinLock(&pde->queueLock);
IoCsqInitializeEx(&pde->csqObject,
V4vCsqInsertIrpEx,
V4vCsqRemoveIrp,
V4vCsqPeekNextIrp,
V4vCsqAcquireLock,
V4vCsqReleaseLock,
V4vCsqCompleteCanceledIrp);
InitializeListHead(&pde->destList);
pde->destCount = 0;
ExInitializeNPagedLookasideList(&pde->destLookasideList,
NULL,
NULL,
0,
sizeof(XENV4V_DESTINATION),
XENV4V_TAG,
0);
KeQueryTickCount(&seed);
pde->seed = seed.u.LowPart;
// Now attach us to the stack
pde->ldo = IoAttachDeviceToDeviceStack(fdo, pdo);
if (pde->ldo == NULL) {
TraceError(("failed to attach device to stack - error: 0x%x\n", status));
status = STATUS_NO_SUCH_DEVICE;
break;
}
// Use direct IO and let the IO manager directly map user buffers; clear the init flag
fdo->Flags |= DO_DIRECT_IO;
fdo->Flags &= ~DO_DEVICE_INITIALIZING;
// Made it here, go to connected state to be consistent
xenbus_change_state(XBT_NIL, pde->frontendPath, "state", XENBUS_STATE_CONNECTED);
} while (FALSE);
if (!NT_SUCCESS(status)) {
if (fdo != NULL) {
if ((pde != NULL)&&(pde->ldo != NULL)) {
IoDetachDevice(pde->ldo);
}
if (szFpath != NULL) {
XmFreeMemory(szFpath);
}
if (symlink) {
IoDeleteSymbolicLink(&pde->symbolicLink);
}
IoDeleteDevice(fdo);
}
}
TraceVerbose(("<==== '%s'.\n", __FUNCTION__));
return status;
}
NTSTATUS
NtCreateTimer (
OUT PHANDLE TimerHandle,
IN ACCESS_MASK DesiredAccess,
IN POBJECT_ATTRIBUTES ObjectAttributes OPTIONAL,
IN TIMER_TYPE TimerType
)
/*++
Routine Description:
This function creates an timer object and opens a handle to the object with
the specified desired access.
Arguments:
TimerHandle - Supplies a pointer to a variable that will receive the
timer object handle.
DesiredAccess - Supplies the desired types of access for the timer object.
ObjectAttributes - Supplies a pointer to an object attributes structure.
TimerType - Supplies the type of the timer (autoclearing or notification).
Return Value:
TBS
--*/
{
PETIMER ExTimer;
HANDLE Handle;
KPROCESSOR_MODE PreviousMode;
NTSTATUS Status;
//
// Establish an exception handler, probe the output handle address, and
// attempt to create a timer object. If the probe fails, then return the
// exception code as the service status. Otherwise return the status value
// returned by the object insertion routine.
//
try {
//
// Get previous processor mode and probe output handle address if
// necessary.
//
PreviousMode = KeGetPreviousMode();
if (PreviousMode != KernelMode) {
ProbeForWriteHandle(TimerHandle);
}
//
// Check argument validity.
//
if ((TimerType != NotificationTimer) &&
(TimerType != SynchronizationTimer)) {
return STATUS_INVALID_PARAMETER_4;
}
//
// Allocate timer object.
//
Status = ObCreateObject(PreviousMode,
ExTimerObjectType,
ObjectAttributes,
PreviousMode,
NULL,
sizeof(ETIMER),
0,
0,
(PVOID *)&ExTimer);
//
// If the timer object was successfully allocated, then initialize the
// timer object and attempt to insert the time object in the current
// process' handle table.
//
if (NT_SUCCESS(Status)) {
KeInitializeDpc(&ExTimer->TimerDpc,
ExpTimerDpcRoutine,
(PVOID)ExTimer);
KeInitializeTimerEx(&ExTimer->KeTimer, TimerType);
KeInitializeSpinLock(&ExTimer->Lock);
ExTimer->ApcAssociated = FALSE;
ExTimer->WakeTimer = FALSE;
ExTimer->WakeTimerListEntry.Flink = NULL;
Status = ObInsertObject((PVOID)ExTimer,
NULL,
DesiredAccess,
0,
(PVOID *)NULL,
&Handle);
//
// If the timer object was successfully inserted in the current
// process' handle table, then attempt to write the timer object
// handle value. If the write attempt fails, then do not report
// an error. When the caller attempts to access the handle value,
// an access violation will occur.
//
if (NT_SUCCESS(Status)) {
try {
*TimerHandle = Handle;
} except(ExSystemExceptionFilter()) {
}
}
}
//
// If an exception occurs during the probe of the output handle address,
// then always handle the exception and return the exception code as the
// status value.
//
} except(ExSystemExceptionFilter()) {
return GetExceptionCode();
}
//
// Return service status.
//
return Status;
}
BOOLEAN
INIT_FUNCTION
NTAPI
IoInitSystem(IN PLOADER_PARAMETER_BLOCK LoaderBlock)
{
LARGE_INTEGER ExpireTime;
NTSTATUS Status;
CHAR Buffer[256];
ANSI_STRING NtBootPath, RootString;
/* Initialize empty NT Boot Path */
RtlInitEmptyAnsiString(&NtBootPath, Buffer, sizeof(Buffer));
/* Initialize the lookaside lists */
IopInitLookasideLists();
/* Initialize all locks and lists */
ExInitializeResource(&IopDatabaseResource);
ExInitializeResource(&IopSecurityResource);
KeInitializeGuardedMutex(&PnpNotifyListLock);
InitializeListHead(&IopDiskFileSystemQueueHead);
InitializeListHead(&IopCdRomFileSystemQueueHead);
InitializeListHead(&IopTapeFileSystemQueueHead);
InitializeListHead(&IopNetworkFileSystemQueueHead);
InitializeListHead(&DriverBootReinitListHead);
InitializeListHead(&DriverReinitListHead);
InitializeListHead(&PnpNotifyListHead);
InitializeListHead(&ShutdownListHead);
InitializeListHead(&LastChanceShutdownListHead);
InitializeListHead(&IopFsNotifyChangeQueueHead);
InitializeListHead(&IopErrorLogListHead);
KeInitializeSpinLock(&IoStatisticsLock);
KeInitializeSpinLock(&DriverReinitListLock);
KeInitializeSpinLock(&DriverBootReinitListLock);
KeInitializeSpinLock(&ShutdownListLock);
KeInitializeSpinLock(&IopLogListLock);
/* Initialize Timer List Lock */
KeInitializeSpinLock(&IopTimerLock);
/* Initialize Timer List */
InitializeListHead(&IopTimerQueueHead);
/* Initialize the DPC/Timer which will call the other Timer Routines */
ExpireTime.QuadPart = -10000000;
KeInitializeDpc(&IopTimerDpc, IopTimerDispatch, NULL);
KeInitializeTimerEx(&IopTimer, SynchronizationTimer);
KeSetTimerEx(&IopTimer, ExpireTime, 1000, &IopTimerDpc);
/* Create Object Types */
if (!IopCreateObjectTypes())
{
DPRINT1("IopCreateObjectTypes failed!\n");
return FALSE;
}
/* Create Object Directories */
if (!IopCreateRootDirectories())
{
DPRINT1("IopCreateRootDirectories failed!\n");
return FALSE;
}
/* Initialize PnP manager */
IopInitializePlugPlayServices();
/* Initialize HAL Root Bus Driver */
HalInitPnpDriver();
/* Make loader block available for the whole kernel */
IopLoaderBlock = LoaderBlock;
/* Load boot start drivers */
IopInitializeBootDrivers();
/* Call back drivers that asked for */
IopReinitializeBootDrivers();
/* Check if this was a ramdisk boot */
if (!_strnicmp(LoaderBlock->ArcBootDeviceName, "ramdisk(0)", 10))
{
/* Initialize the ramdisk driver */
IopStartRamdisk(LoaderBlock);
}
/* No one should need loader block any longer */
IopLoaderBlock = NULL;
/* Create ARC names for boot devices */
Status = IopCreateArcNames(LoaderBlock);
if (!NT_SUCCESS(Status))
{
DPRINT1("IopCreateArcNames failed: %lx\n", Status);
return FALSE;
}
/* Mark the system boot partition */
if (!IopMarkBootPartition(LoaderBlock))
{
DPRINT1("IopMarkBootPartition failed!\n");
return FALSE;
}
/* Initialize PnP root relations */
IopEnumerateDevice(IopRootDeviceNode->PhysicalDeviceObject);
#ifndef _WINKD_
/* Read KDB Data */
KdbInit();
/* I/O is now setup for disk access, so phase 3 */
KdInitSystem(3, LoaderBlock);
#endif
/* Load services for devices found by PnP manager */
IopInitializePnpServices(IopRootDeviceNode);
/* Load system start drivers */
IopInitializeSystemDrivers();
PnpSystemInit = TRUE;
/* Reinitialize drivers that requested it */
IopReinitializeDrivers();
/* Convert SystemRoot from ARC to NT path */
Status = IopReassignSystemRoot(LoaderBlock, &NtBootPath);
if (!NT_SUCCESS(Status))
{
DPRINT1("IopReassignSystemRoot failed: %lx\n", Status);
return FALSE;
}
/* Set the ANSI_STRING for the root path */
RootString.MaximumLength = NtSystemRoot.MaximumLength / sizeof(WCHAR);
RootString.Length = 0;
RootString.Buffer = ExAllocatePoolWithTag(PagedPool,
RootString.MaximumLength,
TAG_IO);
/* Convert the path into the ANSI_STRING */
Status = RtlUnicodeStringToAnsiString(&RootString, &NtSystemRoot, FALSE);
if (!NT_SUCCESS(Status))
{
DPRINT1("RtlUnicodeStringToAnsiString failed: %lx\n", Status);
return FALSE;
}
/* Assign drive letters */
IoAssignDriveLetters(LoaderBlock,
&NtBootPath,
(PUCHAR)RootString.Buffer,
&RootString);
/* Update system root */
Status = RtlAnsiStringToUnicodeString(&NtSystemRoot, &RootString, FALSE);
if (!NT_SUCCESS(Status))
{
DPRINT1("RtlAnsiStringToUnicodeString failed: %lx\n", Status);
return FALSE;
}
/* Load the System DLL and its Entrypoints */
Status = PsLocateSystemDll();
if (!NT_SUCCESS(Status))
{
DPRINT1("PsLocateSystemDll failed: %lx\n", Status);
return FALSE;
}
/* Return success */
return TRUE;
}
VOID IOThread(IN PVOID Context)
{
KIRQL currentIrql, oldIrql;
LARGE_INTEGER timeout, maxTimeout;
NTSTATUS status = STATUS_SUCCESS;
PRING_BUFFER pRb;
const PCHAR pMsg = "messahe1";
ULONG size = 8;
INT_PTR state;
PKTIMER pTimer;
LONG interval;
PVOID pObjects[3]; // wait for
KeSetEvent(&StartEvent, 0, FALSE);
timeout.QuadPart = -6000 * 10000; // 10 sec
interval = 20000; // 5 sec
maxTimeout.QuadPart = -20000 * 10000;
InitRingBuffer(&pRb);
state = (INT_PTR) ExAllocatePool(NonPagedPool, sizeof(INT));
// Set timer for periodic flush
pTimer=(PKTIMER) ExAllocatePool(NonPagedPool, sizeof(KTIMER));
KeInitializeTimerEx(pTimer, SynchronizationTimer);
KeSetTimerEx(pTimer, timeout, interval, NULL);
pObjects[0] = pTimer; // periodic timer
pObjects[1] = &StopEvent; // stop flush loop
pObjects[2] = &FlushEvent; // do flush, buffer is full
// Flush loop
while (status != STATUS_WAIT_1) {
status = KeWaitForMultipleObjects(
3,
pObjects,
WaitAny,
Executive,
KernelMode,
FALSE,
&maxTimeout,
NULL);
if (status == STATUS_WAIT_0) {
DbgPrint("Timer flush\n");
} else if (status == STATUS_WAIT_2) {
DbgPrint("RB flush\n");
} else if (status == STATUS_TIMEOUT) {
DbgPrint("Timeout delay\n");
break;
}
//Klog("Msg from klog %d\s", 123);
KloggerWriteToFile();
//DbgPrint("State: %d\n", state);
}
DbgPrint("klogger.sys: IOThread get stop signal\n");
// Free resources
KeCancelTimer(pTimer);
ExFreePool(pTimer);
FreeRingBuffer(pRb);
PsTerminateSystemThread(status);
}
NTSTATUS
MobiUsb_AddDevice(
IN PDRIVER_OBJECT DriverObject,
IN PDEVICE_OBJECT PhysicalDeviceObject
)
/*++
Description:
Arguments:
DriverObject - Store the pointer to the object representing us.
PhysicalDeviceObject - Pointer to the device object created by the
undelying bus driver.
Return:
STATUS_SUCCESS - if successful
STATUS_UNSUCCESSFUL - otherwise
--*/
{
NTSTATUS ntStatus;
PDEVICE_OBJECT deviceObject;
PDEVICE_EXTENSION deviceExtension;
POWER_STATE state;
KIRQL oldIrql;
MobiUsb_DbgPrint(3, ("file mobiusb: MobiUsb_AddDevice - begins\n"));
deviceObject = NULL;
ntStatus = IoCreateDevice(
DriverObject, // our driver object
sizeof(DEVICE_EXTENSION), // extension size for us
NULL, // name for this device
FILE_DEVICE_UNKNOWN,
FILE_AUTOGENERATED_DEVICE_NAME, // device characteristics
FALSE, // Not exclusive
&deviceObject); // Our device object
if(!NT_SUCCESS(ntStatus)) {
//
// returning failure here prevents the entire stack from functioning,
// but most likely the rest of the stack will not be able to create
// device objects either, so it is still OK.
//
MobiUsb_DbgPrint(1, ("file mobiusb: Failed to create device object\n"));
return ntStatus;
}
//
// Initialize the device extension
//
deviceExtension = (PDEVICE_EXTENSION) deviceObject->DeviceExtension;
deviceExtension->FunctionalDeviceObject = deviceObject;
deviceExtension->PhysicalDeviceObject = PhysicalDeviceObject;
#ifdef MOBI_DIRECT_IO
deviceObject->Flags |= DO_DIRECT_IO;
#else
deviceObject->Flags |= DO_BUFFERED_IO;
#endif
//
// initialize the device state lock and set the device state
//
KeInitializeSpinLock(&deviceExtension->DevStateLock);
INITIALIZE_PNP_STATE(deviceExtension);
//
//initialize OpenHandleCount
//
deviceExtension->OpenHandleCount = 0;
//
// Initialize the selective suspend variables
//
KeInitializeSpinLock(&deviceExtension->IdleReqStateLock);
deviceExtension->IdleReqPend = 0;
deviceExtension->PendingIdleIrp = NULL;
//
// Initialize the vendor command semaphore
//
KeInitializeSemaphore(&deviceExtension->CallUSBSemaphore, 1, 1);
//
// Hold requests until the device is started
//
deviceExtension->QueueState = HoldRequests;
//
// Initialize the queue and the queue spin lock
//
InitializeListHead(&deviceExtension->NewRequestsQueue);
KeInitializeSpinLock(&deviceExtension->QueueLock);
//
// Initialize the remove event to not-signaled.
//
KeInitializeEvent(&deviceExtension->RemoveEvent,
SynchronizationEvent,
FALSE);
//
// Initialize the stop event to signaled.
// This event is signaled when the OutstandingIO becomes 1
//
KeInitializeEvent(&deviceExtension->StopEvent,
SynchronizationEvent,
TRUE);
//
// OutstandingIo count biased to 1.
// Transition to 0 during remove device means IO is finished.
// Transition to 1 means the device can be stopped
//
deviceExtension->OutStandingIO = 1;
KeInitializeSpinLock(&deviceExtension->IOCountLock);
//
// Delegating to WMILIB
//
ntStatus = MobiUsb_WmiRegistration(deviceExtension);
if(!NT_SUCCESS(ntStatus)) {
MobiUsb_DbgPrint(1, ("file mobiusb: MobiUsb_WmiRegistration failed with %X\n", ntStatus));
IoDeleteDevice(deviceObject);
return ntStatus;
}
//
// set the flags as underlying PDO
//
if(PhysicalDeviceObject->Flags & DO_POWER_PAGABLE) {
deviceObject->Flags |= DO_POWER_PAGABLE;
}
//
// Typically, the function driver for a device is its
// power policy owner, although for some devices another
// driver or system component may assume this role.
// Set the initial power state of the device, if known, by calling
// PoSetPowerState.
//
deviceExtension->DevPower = PowerDeviceD0;
deviceExtension->SysPower = PowerSystemWorking;
state.DeviceState = PowerDeviceD0;
PoSetPowerState(deviceObject, DevicePowerState, state);
//
// attach our driver to device stack
// The return value of IoAttachDeviceToDeviceStack is the top of the
// attachment chain. This is where all the IRPs should be routed.
//
deviceExtension->TopOfStackDeviceObject =
IoAttachDeviceToDeviceStack(deviceObject,
PhysicalDeviceObject);
if(NULL == deviceExtension->TopOfStackDeviceObject) {
MobiUsb_WmiDeRegistration(deviceExtension);
IoDeleteDevice(deviceObject);
return STATUS_NO_SUCH_DEVICE;
}
//
// Register device interfaces
//
ntStatus = IoRegisterDeviceInterface(deviceExtension->PhysicalDeviceObject,
&GUID_CLASS_VCMOBI_MOBI,
NULL,
&deviceExtension->InterfaceName);
if(!NT_SUCCESS(ntStatus)) {
MobiUsb_WmiDeRegistration(deviceExtension);
IoDetachDevice(deviceExtension->TopOfStackDeviceObject);
IoDeleteDevice(deviceObject);
return ntStatus;
}
//MobiUsb_DbgPrint(3, ("file mobiusb: interfacename: Filename = %ws nameLength = %d\n", deviceExtension->InterfaceName.Buffer, deviceExtension->InterfaceName.Length / sizeof(WCHAR)));
if(IoIsWdmVersionAvailable(1, 0x20)) {
deviceExtension->WdmVersion = WinXpOrBetter;
}
else if(IoIsWdmVersionAvailable(1, 0x10)) {
deviceExtension->WdmVersion = Win2kOrBetter;
}
else if(IoIsWdmVersionAvailable(1, 0x5)) {
deviceExtension->WdmVersion = WinMeOrBetter;
}
else if(IoIsWdmVersionAvailable(1, 0x0)) {
deviceExtension->WdmVersion = Win98OrBetter;
}
MobiUsb_DbgPrint(3, ("file mobiusb: WdmVersion = %d\n", deviceExtension->WdmVersion));
deviceExtension->SSRegistryEnable = 0;
deviceExtension->SSEnable = 0;
//
// WinXP only
// check the registry flag -
// whether the device should selectively
// suspend when idle
//
if(WinXpOrBetter == deviceExtension->WdmVersion) {
MobiUsb_GetRegistryDword(MOBIUSB_REGISTRY_PARAMETERS_PATH,
L"VCMobiEnable",
&deviceExtension->SSRegistryEnable);
if(deviceExtension->SSRegistryEnable) {
//
// initialize DPC
//
KeInitializeDpc(&deviceExtension->DeferredProcCall,
DpcRoutine,
deviceObject);
//
// initialize the timer.
// the DPC and the timer in conjunction,
// monitor the state of the device to
// selectively suspend the device.
//
KeInitializeTimerEx(&deviceExtension->Timer,
NotificationTimer);
//
// Initialize the NoDpcWorkItemPendingEvent to signaled state.
// This event is cleared when a Dpc is fired and signaled
// on completion of the work-item.
//
KeInitializeEvent(&deviceExtension->NoDpcWorkItemPendingEvent,
NotificationEvent,
TRUE);
//
// Initialize the NoIdleReqPendEvent to ensure that the idle request
// is indeed complete before we unload the drivers.
//
KeInitializeEvent(&deviceExtension->NoIdleReqPendEvent,
NotificationEvent,
TRUE);
}
}
//
// Clear the DO_DEVICE_INITIALIZING flag.
// Note: Do not clear this flag until the driver has set the
// device power state and the power DO flags.
//
deviceObject->Flags &= ~DO_DEVICE_INITIALIZING;
MobiUsb_DbgPrint(3, ("file mobiusb: MobiUsb_AddDevice - ends\n"));
return ntStatus;
}
NTSTATUS NTAPI
AddDevice(PDRIVER_OBJECT DriverObject, PDEVICE_OBJECT Pdo)
{
NTSTATUS Status = STATUS_UNSUCCESSFUL;
PDEVICE_OBJECT Fdo;
ULONG UsbDeviceNumber = 0;
WCHAR CharDeviceName[64];
WCHAR CharSymLinkName[64];
UNICODE_STRING DeviceName;
UNICODE_STRING SymLinkName;
UNICODE_STRING InterfaceSymLinkName;
ULONG BytesRead;
PCI_COMMON_CONFIG PciConfig;
PFDO_DEVICE_EXTENSION FdoDeviceExtension;
DPRINT1("Ehci: AddDevice\n");
/* Create the FDO with next available number */
while (TRUE)
{
/* FIXME: Use safe string sprintf*/
/* RtlStringCchPrintfW(CharDeviceName, 64, L"USBFDO-%d", UsbDeviceNumber); */
swprintf(CharDeviceName, L"\\Device\\USBFDO-%d", UsbDeviceNumber);
RtlInitUnicodeString(&DeviceName, CharDeviceName);
DPRINT("DeviceName %wZ\n", &DeviceName);
Status = IoCreateDevice(DriverObject,
sizeof(FDO_DEVICE_EXTENSION),
&DeviceName,
FILE_DEVICE_CONTROLLER,
0,
FALSE,
&Fdo);
if (NT_SUCCESS(Status))
break;
if ((Status == STATUS_OBJECT_NAME_EXISTS) || (Status == STATUS_OBJECT_NAME_COLLISION))
{
/* Try the next name */
UsbDeviceNumber++;
continue;
}
/* Bail on any other error */
if (!NT_SUCCESS(Status))
{
DPRINT1("UsbEhci: Failed to create %wZ, Status %x\n", &DeviceName, Status);
return Status;
}
}
swprintf(CharSymLinkName, L"\\Device\\HCD%d", UsbDeviceNumber);
RtlInitUnicodeString(&SymLinkName, CharSymLinkName);
Status = IoCreateSymbolicLink(&SymLinkName, &DeviceName);
if (!NT_SUCCESS(Status))
{
DPRINT1("Warning: Unable to create symbolic link for ehci host controller!\n");
}
FdoDeviceExtension = (PFDO_DEVICE_EXTENSION) Fdo->DeviceExtension;
RtlZeroMemory(FdoDeviceExtension, sizeof(PFDO_DEVICE_EXTENSION));
KeInitializeTimerEx(&FdoDeviceExtension->UpdateTimer, SynchronizationTimer);
FdoDeviceExtension->Common.IsFdo = TRUE;
FdoDeviceExtension->DeviceObject = Fdo;
FdoDeviceExtension->LowerDevice = IoAttachDeviceToDeviceStack(Fdo, Pdo);
if (FdoDeviceExtension->LowerDevice == NULL)
{
DPRINT1("UsbEhci: Failed to attach to device stack!\n");
IoDeleteSymbolicLink(&SymLinkName);
IoDeleteDevice(Fdo);
return STATUS_NO_SUCH_DEVICE;
}
Fdo->Flags |= DO_BUFFERED_IO;// | DO_POWER_PAGABLE;
ASSERT(FdoDeviceExtension->LowerDevice == Pdo);
/* Get the EHCI Device ID and Vendor ID */
Status = GetBusInterface(FdoDeviceExtension->LowerDevice, &FdoDeviceExtension->BusInterface);
if (!NT_SUCCESS(Status))
{
DPRINT1("GetBusInterface() failed with %x\n", Status);
IoDetachDevice(FdoDeviceExtension->LowerDevice);
IoDeleteSymbolicLink(&SymLinkName);
IoDeleteDevice(Fdo);
return Status;
}
BytesRead = (*FdoDeviceExtension->BusInterface.GetBusData)(
FdoDeviceExtension->BusInterface.Context,
PCI_WHICHSPACE_CONFIG,
&PciConfig,
0,
PCI_COMMON_HDR_LENGTH);
if (BytesRead != PCI_COMMON_HDR_LENGTH)
{
DPRINT1("GetBusData failed!\n");
IoDetachDevice(FdoDeviceExtension->LowerDevice);
IoDeleteSymbolicLink(&SymLinkName);
IoDeleteDevice(Fdo);
return STATUS_UNSUCCESSFUL;
}
if (PciConfig.Command & PCI_ENABLE_IO_SPACE)
DPRINT("PCI_ENABLE_IO_SPACE\n");
if (PciConfig.Command & PCI_ENABLE_MEMORY_SPACE)
DPRINT("PCI_ENABLE_MEMORY_SPACE\n");
if (PciConfig.Command & PCI_ENABLE_BUS_MASTER)
DPRINT("PCI_ENABLE_BUS_MASTER\n");
DPRINT("BaseAddress[0] %x\n", PciConfig.u.type0.BaseAddresses[0]);
DPRINT1("Vendor %x\n", PciConfig.VendorID);
DPRINT1("Device %x\n", PciConfig.DeviceID);
FdoDeviceExtension->VendorId = PciConfig.VendorID;
FdoDeviceExtension->DeviceId = PciConfig.DeviceID;
FdoDeviceExtension->DeviceState = DEVICEINTIALIZED;
Status = IoRegisterDeviceInterface(Pdo, &GUID_DEVINTERFACE_USB_HOST_CONTROLLER, NULL, &InterfaceSymLinkName);
if (!NT_SUCCESS(Status))
{
DPRINT1("Unable to register device interface!\n");
return Status;
}
else
{
Status = IoSetDeviceInterfaceState(&InterfaceSymLinkName, TRUE);
DPRINT1("SetInterfaceState %x\n", Status);
if (!NT_SUCCESS(Status))
return Status;
}
Fdo->Flags &= ~DO_DEVICE_INITIALIZING;
return STATUS_SUCCESS;
}
RTDECL(int) RTTimerCreateEx(PRTTIMER *ppTimer, uint64_t u64NanoInterval, uint32_t fFlags, PFNRTTIMER pfnTimer, void *pvUser)
{
*ppTimer = NULL;
/*
* Validate flags.
*/
if (!RTTIMER_FLAGS_ARE_VALID(fFlags))
return VERR_INVALID_PARAMETER;
if ( (fFlags & RTTIMER_FLAGS_CPU_SPECIFIC)
&& (fFlags & RTTIMER_FLAGS_CPU_ALL) != RTTIMER_FLAGS_CPU_ALL
&& !RTMpIsCpuPossible(RTMpCpuIdFromSetIndex(fFlags & RTTIMER_FLAGS_CPU_MASK)))
return VERR_CPU_NOT_FOUND;
/*
* Allocate the timer handler.
*/
RTCPUID cSubTimers = 1;
if ((fFlags & RTTIMER_FLAGS_CPU_ALL) == RTTIMER_FLAGS_CPU_ALL)
{
cSubTimers = RTMpGetMaxCpuId() + 1;
Assert(cSubTimers <= RTCPUSET_MAX_CPUS); /* On Windows we have a 1:1 relationship between cpuid and set index. */
}
PRTTIMER pTimer = (PRTTIMER)RTMemAllocZ(RT_OFFSETOF(RTTIMER, aSubTimers[cSubTimers]));
if (!pTimer)
return VERR_NO_MEMORY;
/*
* Initialize it.
*/
pTimer->u32Magic = RTTIMER_MAGIC;
pTimer->fSuspended = true;
pTimer->fSpecificCpu = (fFlags & RTTIMER_FLAGS_CPU_SPECIFIC) && (fFlags & RTTIMER_FLAGS_CPU_ALL) != RTTIMER_FLAGS_CPU_ALL;
pTimer->fOmniTimer = (fFlags & RTTIMER_FLAGS_CPU_ALL) == RTTIMER_FLAGS_CPU_ALL;
pTimer->idCpu = pTimer->fSpecificCpu ? RTMpCpuIdFromSetIndex(fFlags & RTTIMER_FLAGS_CPU_MASK) : NIL_RTCPUID;
pTimer->cSubTimers = cSubTimers;
pTimer->pfnTimer = pfnTimer;
pTimer->pvUser = pvUser;
pTimer->u64NanoInterval = u64NanoInterval;
KeInitializeTimerEx(&pTimer->NtTimer, SynchronizationTimer);
if (pTimer->fOmniTimer)
{
/*
* Initialize the per-cpu "sub-timers", select the first online cpu
* to be the master.
* ASSUMES that no cpus will ever go offline.
*/
pTimer->idCpu = NIL_RTCPUID;
for (unsigned iCpu = 0; iCpu < cSubTimers; iCpu++)
{
pTimer->aSubTimers[iCpu].iTick = 0;
pTimer->aSubTimers[iCpu].pParent = pTimer;
if ( pTimer->idCpu == NIL_RTCPUID
&& RTMpIsCpuOnline(RTMpCpuIdFromSetIndex(iCpu)))
{
pTimer->idCpu = RTMpCpuIdFromSetIndex(iCpu);
KeInitializeDpc(&pTimer->aSubTimers[iCpu].NtDpc, rtTimerNtOmniMasterCallback, &pTimer->aSubTimers[iCpu]);
}
else
KeInitializeDpc(&pTimer->aSubTimers[iCpu].NtDpc, rtTimerNtOmniSlaveCallback, &pTimer->aSubTimers[iCpu]);
KeSetImportanceDpc(&pTimer->aSubTimers[iCpu].NtDpc, HighImportance);
KeSetTargetProcessorDpc(&pTimer->aSubTimers[iCpu].NtDpc, (int)RTMpCpuIdFromSetIndex(iCpu));
}
Assert(pTimer->idCpu != NIL_RTCPUID);
}
else
{
/*
* Initialize the first "sub-timer", target the DPC on a specific processor
* if requested to do so.
*/
pTimer->aSubTimers[0].iTick = 0;
pTimer->aSubTimers[0].pParent = pTimer;
KeInitializeDpc(&pTimer->aSubTimers[0].NtDpc, rtTimerNtSimpleCallback, pTimer);
KeSetImportanceDpc(&pTimer->aSubTimers[0].NtDpc, HighImportance);
if (pTimer->fSpecificCpu)
KeSetTargetProcessorDpc(&pTimer->aSubTimers[0].NtDpc, (int)pTimer->idCpu);
}
*ppTimer = pTimer;
return VINF_SUCCESS;
}
// AddDevice, called when an instance of our supported hardware is found
// Returning anything other than NT_SUCCESS here causes the device to fail
// to initialise
NTSTATUS NTAPI FreeBT_AddDevice(IN PDRIVER_OBJECT DriverObject, IN PDEVICE_OBJECT PhysicalDeviceObject)
{
NTSTATUS ntStatus;
PDEVICE_OBJECT deviceObject;
PDEVICE_EXTENSION deviceExtension;
POWER_STATE state;
KIRQL oldIrql;
UNICODE_STRING uniDeviceName;
WCHAR wszDeviceName[255]={0};
UNICODE_STRING uniDosDeviceName;
LONG instanceNumber=0;
FreeBT_DbgPrint(3, ("FBTUSB: FreeBT_AddDevice: Entered\n"));
deviceObject = NULL;
swprintf(wszDeviceName, L"\\Device\\FbtUsb%02d", instanceNumber);
RtlInitUnicodeString(&uniDeviceName, wszDeviceName);
ntStatus=STATUS_OBJECT_NAME_COLLISION;
while (instanceNumber<99 && !NT_SUCCESS(ntStatus))
{
swprintf(wszDeviceName, L"\\Device\\FbtUsb%02d", instanceNumber);
uniDeviceName.Length = wcslen(wszDeviceName) * sizeof(WCHAR);
FreeBT_DbgPrint(1, ("FBTUSB: Attempting to create device %ws\n", wszDeviceName));
ntStatus = IoCreateDevice(
DriverObject, // our driver object
sizeof(DEVICE_EXTENSION), // extension size for us
&uniDeviceName, // name for this device
FILE_DEVICE_UNKNOWN,
0, // device characteristics
FALSE, // Not exclusive
&deviceObject); // Our device object
if (!NT_SUCCESS(ntStatus))
instanceNumber++;
}
if (!NT_SUCCESS(ntStatus))
{
FreeBT_DbgPrint(1, ("FBTUSB: Failed to create device object\n"));
return ntStatus;
}
FreeBT_DbgPrint(1, ("FBTUSB: Created device %ws\n", wszDeviceName));
deviceExtension = (PDEVICE_EXTENSION) deviceObject->DeviceExtension;
deviceExtension->FunctionalDeviceObject = deviceObject;
deviceExtension->PhysicalDeviceObject = PhysicalDeviceObject;
deviceObject->Flags |= DO_DIRECT_IO;
swprintf(deviceExtension->wszDosDeviceName, L"\\DosDevices\\FbtUsb%02d", instanceNumber);
RtlInitUnicodeString(&uniDosDeviceName, deviceExtension->wszDosDeviceName);
ntStatus=IoCreateSymbolicLink(&uniDosDeviceName, &uniDeviceName);
if (!NT_SUCCESS(ntStatus))
{
FreeBT_DbgPrint(1, ("FBTUSB: Failed to create symbolic link %ws to %ws, status=0x%08x\n", deviceExtension->wszDosDeviceName, wszDeviceName, ntStatus));
IoDeleteDevice(deviceObject);
return ntStatus;
}
FreeBT_DbgPrint(1, ("FBTUSB: Created symbolic link %ws\n", deviceExtension->wszDosDeviceName));
KeInitializeSpinLock(&deviceExtension->DevStateLock);
INITIALIZE_PNP_STATE(deviceExtension);
deviceExtension->OpenHandleCount = 0;
// Initialize the selective suspend variables
KeInitializeSpinLock(&deviceExtension->IdleReqStateLock);
deviceExtension->IdleReqPend = 0;
deviceExtension->PendingIdleIrp = NULL;
// Hold requests until the device is started
deviceExtension->QueueState = HoldRequests;
// Initialize the queue and the queue spin lock
InitializeListHead(&deviceExtension->NewRequestsQueue);
KeInitializeSpinLock(&deviceExtension->QueueLock);
// Initialize the remove event to not-signaled.
KeInitializeEvent(&deviceExtension->RemoveEvent, SynchronizationEvent, FALSE);
// Initialize the stop event to signaled.
// This event is signaled when the OutstandingIO becomes 1
KeInitializeEvent(&deviceExtension->StopEvent, SynchronizationEvent, TRUE);
// OutstandingIo count biased to 1.
// Transition to 0 during remove device means IO is finished.
// Transition to 1 means the device can be stopped
deviceExtension->OutStandingIO = 1;
KeInitializeSpinLock(&deviceExtension->IOCountLock);
#ifdef ENABLE_WMI
// Delegating to WMILIB
ntStatus = FreeBT_WmiRegistration(deviceExtension);
if (!NT_SUCCESS(ntStatus))
{
FreeBT_DbgPrint(1, ("FBTUSB: FreeBT_WmiRegistration failed with %X\n", ntStatus));
IoDeleteDevice(deviceObject);
IoDeleteSymbolicLink(&uniDosDeviceName);
return ntStatus;
}
#endif
// Set the flags as underlying PDO
if (PhysicalDeviceObject->Flags & DO_POWER_PAGABLE)
{
deviceObject->Flags |= DO_POWER_PAGABLE;
}
// Typically, the function driver for a device is its
// power policy owner, although for some devices another
// driver or system component may assume this role.
// Set the initial power state of the device, if known, by calling
// PoSetPowerState.
deviceExtension->DevPower = PowerDeviceD0;
deviceExtension->SysPower = PowerSystemWorking;
state.DeviceState = PowerDeviceD0;
PoSetPowerState(deviceObject, DevicePowerState, state);
// attach our driver to device stack
// The return value of IoAttachDeviceToDeviceStack is the top of the
// attachment chain. This is where all the IRPs should be routed.
deviceExtension->TopOfStackDeviceObject = IoAttachDeviceToDeviceStack(deviceObject, PhysicalDeviceObject);
if (NULL == deviceExtension->TopOfStackDeviceObject)
{
#ifdef ENABLE_WMI
FreeBT_WmiDeRegistration(deviceExtension);
#endif
IoDeleteDevice(deviceObject);
IoDeleteSymbolicLink(&uniDosDeviceName);
return STATUS_NO_SUCH_DEVICE;
}
// Register device interfaces
ntStatus = IoRegisterDeviceInterface(deviceExtension->PhysicalDeviceObject,
&GUID_CLASS_FREEBT_USB,
NULL,
&deviceExtension->InterfaceName);
if (!NT_SUCCESS(ntStatus))
{
#ifdef ENABLE_WMI
FreeBT_WmiDeRegistration(deviceExtension);
#endif
IoDetachDevice(deviceExtension->TopOfStackDeviceObject);
IoDeleteDevice(deviceObject);
IoDeleteSymbolicLink(&uniDosDeviceName);
return ntStatus;
}
if (IoIsWdmVersionAvailable(1, 0x20))
{
deviceExtension->WdmVersion = WinXpOrBetter;
}
else if (IoIsWdmVersionAvailable(1, 0x10))
{
deviceExtension->WdmVersion = Win2kOrBetter;
}
else if (IoIsWdmVersionAvailable(1, 0x5))
{
deviceExtension->WdmVersion = WinMeOrBetter;
}
else if (IoIsWdmVersionAvailable(1, 0x0))
{
deviceExtension->WdmVersion = Win98OrBetter;
}
deviceExtension->SSRegistryEnable = 0;
deviceExtension->SSEnable = 0;
// WinXP only: check the registry flag indicating whether
// the device should selectively suspend when idle
if (WinXpOrBetter == deviceExtension->WdmVersion)
{
FreeBT_GetRegistryDword(FREEBT_REGISTRY_PARAMETERS_PATH,
L"BulkUsbEnable",
(PULONG)(&deviceExtension->SSRegistryEnable));
if (deviceExtension->SSRegistryEnable)
{
// initialize DPC
KeInitializeDpc(&deviceExtension->DeferredProcCall, DpcRoutine, deviceObject);
// initialize the timer.
// the DPC and the timer in conjunction,
// monitor the state of the device to
// selectively suspend the device.
KeInitializeTimerEx(&deviceExtension->Timer, NotificationTimer);
// Initialize the NoDpcWorkItemPendingEvent to signaled state.
// This event is cleared when a Dpc is fired and signaled
// on completion of the work-item.
KeInitializeEvent(&deviceExtension->NoDpcWorkItemPendingEvent, NotificationEvent, TRUE);
// Initialize the NoIdleReqPendEvent to ensure that the idle request
// is indeed complete before we unload the drivers.
KeInitializeEvent(&deviceExtension->NoIdleReqPendEvent, NotificationEvent, TRUE);
}
}
// Initialize the NoIdleReqPendEvent to ensure that the idle request
// is indeed complete before we unload the drivers.
KeInitializeEvent(&deviceExtension->DelayEvent, NotificationEvent, FALSE);
// Clear the DO_DEVICE_INITIALIZING flag.
// Note: Do not clear this flag until the driver has set the
// device power state and the power DO flags.
deviceObject->Flags &= ~DO_DEVICE_INITIALIZING;
InterlockedIncrement(&instanceNumber);
FreeBT_DbgPrint(3, ("FBTUSB: FreeBT_AddDevice: Leaving\n"));
return ntStatus;
}
VOID TestThread(IN PVOID Context)
{
KIRQL currentIrql, oldIrql;
NTSTATUS status = STATUS_SUCCESS;
PKDPC pDpc;
PKTIMER pTimer;
LARGE_INTEGER timeout, maxTimeout;
timeout.QuadPart = -12000 * 10000; // 12 sec
maxTimeout.QuadPart = -20000 * 10000;
DbgPrint("\nTEST THREAD started\n");
// Initialize timer
pTimer = (PKTIMER) ExAllocatePool(NonPagedPool, sizeof(KTIMER));
KeInitializeTimerEx(pTimer, SynchronizationTimer);
KeSetTimer(pTimer, timeout, NULL);
pDpc = (PKDPC) ExAllocatePool(NonPagedPool,sizeof(KDPC));
KeInitializeDpc(pDpc, SetWriteEvent, NULL);
// wait for timer
KeWaitForSingleObject(
pTimer,
Executive,
KernelMode,
FALSE,
&maxTimeout);
DbgPrint("TestThread: set flush event\n");
KeRaiseIrql(PROFILE_LEVEL, &oldIrql);
currentIrql = KeGetCurrentIrql();
//WriteToBuffer(pRb, "some", 4);
DbgPrint("Current irql %d\n", currentIrql);
/*
KeWaitForSingleObject(
pTimer,
Executive,
KernelMode,
FALSE,
&maxTimeout);
*/
if (currentIrql == PASSIVE_LEVEL) {
KeSetEvent(&FlushEvent, 0, FALSE);
} else {
KeInsertQueueDpc(pDpc, NULL, NULL);
}
KeLowerIrql(&oldIrql);
PsTerminateSystemThread(status);
}
//=============================================================================
NTSTATUS CMiniportWaveCyclicStream::Init(
IN PCMiniportWaveCyclic Miniport_,
IN ULONG Pin_,
IN BOOLEAN Capture_,
IN PKSDATAFORMAT DataFormat_
)
/*++
Routine Description:
Initializes the stream object. Allocate a DMA buffer, timer and DPC
Arguments:
Miniport_ -
Pin_ -
Capture_ -
DataFormat -
DmaChannel_ -
Return Value:
NT status code.
--*/
{
PAGED_CODE();
ASSERT(Miniport_);
ASSERT(DataFormat_);
NTSTATUS ntStatus = STATUS_SUCCESS;
PWAVEFORMATEX pWfx;
pWfx = GetWaveFormatEx(DataFormat_);
if (!pWfx) {
DPF(D_TERSE, ("Invalid DataFormat param in NewStream"));
ntStatus = STATUS_INVALID_PARAMETER;
}
if (NT_SUCCESS(ntStatus)) {
m_pMiniport = Miniport_;
m_ulPin = Pin_;
m_fCapture = Capture_;
m_usBlockAlign = pWfx->nBlockAlign;
m_fFormat16Bit = (pWfx->wBitsPerSample == 16);
m_ksState = KSSTATE_STOP;
m_ulDmaPosition = 0;
m_ullElapsedTimeCarryForward = 0;
m_ulByteDisplacementCarryForward = 0;
m_fDmaActive = FALSE;
m_pDpc = NULL;
m_pTimer = NULL;
m_pvDmaBuffer = NULL;
// If this is not the capture stream, create the output file.
if (!m_fCapture) {
if (NT_SUCCESS(ntStatus)) {
ntStatus = m_SaveData.Initialize();
}
}
}
// Allocate DMA buffer for this stream.
if (NT_SUCCESS(ntStatus)) {
ntStatus = AllocateBuffer(m_pMiniport->m_MaxDmaBufferSize, NULL);
}
// Set sample frequency. Note that m_SampleRateSync access should
// be syncronized.
if (NT_SUCCESS(ntStatus)) {
ntStatus = KeWaitForSingleObject(&m_pMiniport->m_SampleRateSync, Executive, KernelMode, FALSE, NULL);
if (STATUS_SUCCESS == ntStatus) {
m_pMiniport->m_SamplingFrequency = pWfx->nSamplesPerSec;
KeReleaseMutex(&m_pMiniport->m_SampleRateSync, FALSE);
} else {
DPF(D_TERSE, ("[SamplingFrequency Sync failed: %08X]", ntStatus));
}
}
if (NT_SUCCESS(ntStatus)) {
ntStatus = SetFormat(DataFormat_);
}
if (NT_SUCCESS(ntStatus)) {
m_pDpc = (PRKDPC) ExAllocatePoolWithTag(NonPagedPool, sizeof(KDPC), MSVAD_POOLTAG);
if (!m_pDpc) {
DPF(D_TERSE, ("[Could not allocate memory for DPC]"));
ntStatus = STATUS_INSUFFICIENT_RESOURCES;
}
}
if (NT_SUCCESS(ntStatus)) {
m_pTimer = (PKTIMER) ExAllocatePoolWithTag(NonPagedPool, sizeof(KTIMER), MSVAD_POOLTAG);
if (!m_pTimer) {
DPF(D_TERSE, ("[Could not allocate memory for Timer]"));
ntStatus = STATUS_INSUFFICIENT_RESOURCES;
}
}
if (NT_SUCCESS(ntStatus)) {
KeInitializeDpc(m_pDpc, TimerNotify, m_pMiniport);
KeInitializeTimerEx(m_pTimer, NotificationTimer);
}
return ntStatus;
} // Init