/*****************************************************************************
** �������: LCD_WriteBMP
** ��������: ��ָ����λ����ʾһ��ͼƬ
Xpos��YposΪͼƬ��ʾ��ַ��Height��Width ΪͼƬ�Ŀ�Ⱥ߶�
** �� ����: Dream
** �ա� ��: 2010��12��06��
*****************************************************************************/
void LCD_WriteBMP(uint8_t Xpos, uint16_t Ypos, uint8_t Height, uint16_t Width, uint8_t *bitmap)
{
uint32_t index;
uint32_t size = Height * Width;
uint16_t *bitmap_ptr = (uint16_t *)bitmap;
LCD_SetDisplayWindow(Xpos, Ypos, Width-1, Height-1);
//LCD_WriteReg(0x03, 0x1038); //�����Ҫ������ʾͼƬ������ȥ������ ��ͬʱ��Width��Hight����һ�¾Ϳ���
LCD_WriteRAM_Prepare();
for(index = 0; index < size; index++)
{
Write_Dat(*bitmap_ptr++);
}
//�ָ������С
LCD_WriteReg(R80, 0x0000); //ˮƽ����GRAM��ʼ��ַ
LCD_WriteReg(R81, 0x00EF); //ˮƽ����GRAM�����ַ
LCD_WriteReg(R82, 0x0000); //��ֱ����GRAM��ʼ��ַ
LCD_WriteReg(R83, 0x013F); //��ֱ����GRAM�����ַ
}
static void displaySMeter(int RSL)
{
int x = 80;
int y = 68;
LCD_SetDisplayWindow(x, y, SMETER_HEIGHT, FFT_WIDTH);
LCD_WriteRAM_PrepareDir(LCD_WriteRAMDir_Down);
int Signal_Level = ((RSL + 120) * 26) / 10;
for (int x = 0; x < FFT_WIDTH; x++) {
for (int y = 0; y < SMETER_HEIGHT; y++) {
if (x <= Signal_Level) {
LCD_WriteRAM(LCD_COLOR_GREEN);
}
else {
LCD_WriteRAM(LCD_COLOR_DGRAY);
}
}
}
char SMeter$[7];
if (Signal_Level < 120) {
if (Signal_Level < 0)
Signal_Level = 0;
int SLevel = Signal_Level / 12;
sprintf(SMeter$, "S%i ", SLevel);
}
else {
int SLevel = 9;
int R = (Signal_Level - 100) / 3;
sprintf(SMeter$, "S%i+%2i", SLevel, R);
}
GL_SetBackColor(LCD_COLOR_BLACK);
GL_SetTextColor(LCD_COLOR_WHITE);
GL_PrintString(1, 64, SMeter$, 0);
}
static void LCD_Config(void)
{
/* Initialise the LCD */
LCD_Init();
/* Initialise the LCD Layers */
LCD_LayerInit();
/* Clear the Hole LCD */
LCD_Clear(LCD_COLOR_WHITE);
/* Set the Foreground as active Layer */
LCD_SetLayer(LCD_FOREGROUND_LAYER);
/* Configure the window size and position */
LCD_SetDisplayWindow(0, 0, 100, 100);
/* Configure the LCD frame Buffer Address */
LCD_SetAddress((uint32_t)&aBufferResult);
/* Configure the LCD Pixel Format */
LCD_SetPixelFormat(LTDC_Pixelformat_ARGB4444);
}
/**
* @brief RCR receiver demo exec.
* @param None
* @retval None
*/
void Menu_RC5Decode_Func(void)
{
TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;
TIM_OCInitTypeDef TIM_OCInitStructure;
/* Disable the TIM15, LED Toggling */
TIM_Cmd(TIM15, DISABLE);
/* Disable the JoyStick interrupt */
Demo_IntExtOnOffCmd(DISABLE);
while (Menu_ReadKey() != NOKEY)
{}
/* Clear the LCD */
LCD_Clear(LCD_COLOR_WHITE);
/* Display Image */
LCD_SetDisplayWindow(120, 192, 64, 64);
Storage_OpenReadFile(120, 192, "STFILES/TV.BMP");
LCD_WindowModeDisable();
/* Set the LCD Back Color */
LCD_SetBackColor(LCD_COLOR_BLUE);
/* Set the LCD Text Color */
LCD_SetTextColor(LCD_COLOR_WHITE);
LCD_DisplayStringLine(LCD_LINE_9, " To exit press UP ");
/* Initialize the InfraRed application: RC5 */
RFDemoStatus = RC5DEMO;
RC5_Init();
while(Menu_ReadKey() != UP)
{
/* Decode the RC5 frame */
RC5_Decode(&RC5_FRAME);
}
LCD_Clear(LCD_COLOR_WHITE);
TIM_DeInit(TIM2);
/* Time Base configuration 100ms*/
TIM_TimeBaseStructInit(&TIM_TimeBaseStructure);
TIM_TimeBaseStructure.TIM_Prescaler = 1000;
TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
TIM_TimeBaseStructure.TIM_Period = 0x0C80;
TIM_TimeBaseStructure.TIM_ClockDivision = 0x0;
TIM_TimeBaseInit(TIM2, &TIM_TimeBaseStructure);
/* Channel 1, 2, 3 and 4 Configuration in Timing mode */
TIM_OCStructInit(&TIM_OCInitStructure);
TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_Timing;
TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;
TIM_OCInitStructure.TIM_Pulse = 0x0;
TIM_OC1Init(TIM2, &TIM_OCInitStructure);
Demo_LedShow(ENABLE);
/* Exit the RF5 demo */
RFDemoStatus = 0;
/* Enable the JoyStick interrupt */
Demo_IntExtOnOffCmd(ENABLE);
/* Display menu */
Menu_DisplayMenu();
}
/**
* @brief Main program.
* @param None
* @retval None
*/
int main(void)
{
NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0x0000);
Redbull_Init();
char buff[128] = { 0 };
LCD_DisplayStringLine(LINE(10), (uint8_t*) " Analog ..............................");
Analog_Config();
printRight(10, "ok");
LCD_DisplayStringLine(LINE(11), (uint8_t*) " DAC .................................");
DAC_Config();
printRight(11, "ok");
f_mount(0, &fatfs);
LCD_DisplayStringLine(LINE(12), (uint8_t*) " TEMP ................................");
OneWireInit();
float c = Read_Temperature();
sprintf(buff, "%.1f", c);
printRight(12, buff);
printf("%s\n", buff);
RGBLED_GPIO_Config(0xff);
RGBLED_Update(0xff,0xff,0xff);
Delay(200);
RGBLED_Update(0xff,0,0);
Delay(200);
RGBLED_Update(0,0xff,0);
Delay(200);
RGBLED_Update(0,0,0xff);
Delay(200);
RGBLED_Update(0,0,0);
//static char path[1024] = "0:";
//LCD_Clear(LCD_COLOR_BLUE);
//LCD_DisplayStringLine(0, (uint8_t*) "Loading...");
Delay(1000);
//int i = 10;
LCD_Clear(LCD_COLOR_BLACK);
LCD_SetDisplayWindow(0, 0, 239, 319);
LCD_WriteReg(3, 0x1000);
LCD_WriteRAM_Prepare();
TIM_Cmd(TIM7, ENABLE);
DMARead();
//float h = 0, s = 1, v = 1;
while (1)
{
while (DMA_GetFlagStatus(DMA1_FLAG_TE1) == SET)
{
printf("DMA error\n");
Delay(100);
}
//uint32_t ms = millis();
uint16_t rem = DMA_GetCurrDataCounter(DMA1_Channel1);
uint16_t cnt = 0xffff - rem;
if (cnt >= 80 && cnt < 512)
{
continue;
}
uint32_t buff[160] = { 0 };
uint16_t tillend = cnt > 160 ? 160 : cnt;
uint16_t fromstart = 160 - tillend;
uint16_t bcnt = cnt - 160;
// before
SRAM_ReadBuffer((uint16_t*) &buff[0], bcnt * 4, tillend * 2);
// after
if (fromstart)
{
SRAM_ReadBuffer((uint16_t*) &buff[tillend], 0, fromstart * 2);
}
uint8_t prevsv = 0;
for (uint16_t i = 0; i < 320; i++)
{
uint16_t val = 0;
if (i & 1)
{
val = buff[i >> 1] & 0x0fff;
}
else
{
val = (buff[i >> 1] >> 16) & 0x0fff;
}
#define MAXV (17 * 238)
val = val > MAXV ? MAXV : val;
uint8_t sv = val / 17;
sv = sv > 238 ? 238 : sv;
sv++;
if (!prevsv)
{
prevsv = sv;
}
uint16_t pbuf[240];
uint8_t minv = sv > prevsv ? prevsv : sv;
uint8_t maxv = sv < prevsv ? prevsv : sv;
for (uint8_t y = 0; y < 240; y++)
{
if (y >= minv && y <= maxv)
{
pbuf[y] = LCD_COLOR_YELLOW;
}
else
{
pbuf[y] = LCD_COLOR_BLACK;
}
}
prevsv = sv;
DMA_InitTypeDef DMA_InitStructure;
DMA_DeInit(DMA2_Channel5);
DMA_InitStructure.DMA_PeripheralBaseAddr = (uint32_t) pbuf;
DMA_InitStructure.DMA_MemoryBaseAddr = (uint32_t) &LCD->LCD_RAM; // FSMC
DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralSRC;
DMA_InitStructure.DMA_BufferSize = 240;
DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Enable;
DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Disable;
DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_HalfWord;
DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_HalfWord;
DMA_InitStructure.DMA_Mode = DMA_Mode_Normal;
DMA_InitStructure.DMA_Priority = DMA_Priority_Low;
DMA_InitStructure.DMA_M2M = DMA_M2M_Enable;
DMA_Init(DMA2_Channel5, &DMA_InitStructure);
DMA_Cmd(DMA2_Channel5, ENABLE);
RTC_t rtc;
RTC_GetTime(&rtc);
//RGBLED_Update((rtc.min & 1) ? 0 : (rtc.hour * 10), ((rtc.sec >> 2) & 1) ? 0 : (rtc.min * 4), rtc.sec * 4);
while (!DMA_GetFlagStatus(DMA2_FLAG_TC5))
;
DMA_ClearFlag(DMA2_FLAG_TC5);
while (GPIO_ReadInputDataBit(GPIOA, GPIO_Pin_8) == RESET)
;
}
/**
* @brief Main program.
* @param None
* @retval None
*/
int main(void)
{
//RCC_Config();
//GPIO_Config();
//RCC_MCO1Config(RCC_MCO1Source_PLLCLK,RCC_MCO1Div_1);
uint8_t tmpreg;
LIS302DL_InitTypeDef LIS302DL_InitStruct;
/*!< At this stage the microcontroller clock setting is already configured,
this is done through SystemInit() function which is called from startup
file (startup_stm32f4xx.s) before to branch to application main.
To reconfigure the default setting of SystemInit() function, refer to
system_stm32f4xx.c file
*/
/* SysTick end of count event each 10ms */
RCC_GetClocksFreq(&RCC_Clocks);
SysTick_Config(RCC_Clocks.HCLK_Frequency / 100);
//NVIC_SetPriority(SysTick_IRQn, -1);
/* MEMS configuration and set int1/int2 pins*/
LIS302DL_InitStruct.Power_Mode = LIS302DL_LOWPOWERMODE_ACTIVE;
LIS302DL_InitStruct.Output_DataRate = LIS302DL_DATARATE_100;
LIS302DL_InitStruct.Axes_Enable = LIS302DL_XYZ_ENABLE;
LIS302DL_InitStruct.Full_Scale = LIS302DL_FULLSCALE_2_3;
LIS302DL_InitStruct.Self_Test = LIS302DL_SELFTEST_NORMAL;
LIS302DL_Init(&LIS302DL_InitStruct);
//Set INT1/INT2 pins
tmpreg = 0x40;
LIS302DL_Write(&tmpreg, LIS302DL_CTRL_REG3_ADDR, 1);
//Initialize the touchscreen
TSC_Init();
/* Initialize LEDs and push-buttons mounted on STM324xG-EVAL board */
STM_EVAL_LEDInit(LED1);
STM_EVAL_LEDInit(LED2);
//STM_EVAL_LEDInit(LED3);
//STM_EVAL_LEDInit(LED4);
/* Initialize the LCD */
STM324xG_LCD_Init();
//STM_EVAL_LEDOn(LED1);
LCD_Clear(Black);
LCD_SetTextColor(White);
LCD_LOG_SetHeader("STM32 Camera Demo");
LCD_LOG_SetFooter (" Copyright (c) STMicroelectronics" );
/* ADC configuration */
ADC_Config();
/* Initializes the DCMI interface (I2C and GPIO) used to configure the camera */
//OV9655_HW_Init();
OV9712_HW_Init();
/* Read the OV9655/OV2640 Manufacturer identifier */
//OV9655_ReadID(&OV9655_Camera_ID);
OV9712_ReadID(&OV9712_Camera_ID);
//while(1);
if(OV9655_Camera_ID.PID == 0x96)
{
Camera = OV9712_CAMERA;
sprintf((char*)buffer, "OV9655 Camera ID 0x%x", OV9655_Camera_ID.PID);
ValueMax = 2;
}
else if(OV9712_Camera_ID.PIDH == 0x97)
{
Camera = OV9712_CAMERA;
sprintf((char*)buffer, "OV9712 Camera ID 0x%x", OV9712_Camera_ID.PIDH);
ValueMax = 2;
}
else
{
LCD_SetTextColor(LCD_COLOR_RED);
sprintf((char*)buffer, "OV Camera ID 0x%02x%02x", OV9655_Camera_ID.Version, OV9712_Camera_ID.PIDH);
LCD_DisplayStringLine(LINE(4), buffer);
while(1);
}
LCD_SetTextColor(LCD_COLOR_YELLOW);
LCD_DisplayStringLine(LINE(4), (uint8_t*)buffer);
LCD_SetTextColor(LCD_COLOR_WHITE);
Delay(200);
/* Initialize demo */
ImageFormat = (ImageFormat_TypeDef)BMP_QVGA;
/* Configure the Camera module mounted on STM324xG-EVAL board */
Demo_LCD_Clear();
LCD_DisplayStringLine(LINE(4), "Camera Init.. ");
Camera_Config();
sprintf((char*)buffer, " Image selected: %s", ImageForematArray[ImageFormat]);
LCD_DisplayStringLine(LINE(4),(uint8_t*)buffer);
LCD_ClearLine(LINE(4));
Demo_LCD_Clear();
if(ImageFormat == BMP_QQVGA)
{
/* LCD Display window */
LCD_SetDisplayWindow(60, 80, 160, 120);
ReverseLCD();
LCD_WriteRAM_Prepare();
}
else if(ImageFormat == BMP_QVGA)
{
/* LCD Display window */
LCD_SetDisplayWindow(0, 0, 320, 240);
ReverseLCD();
LCD_WriteRAM_Prepare();
}
{
int i, j;
for (j = 0; j < 16; j++)
{
LCD_SetDisplayWindow(0, (240 / 16) * j, 320, (240 / 16));
LCD_WriteRAM_Prepare();
for (i = 0; i < 320 * 240 / 16; i++)
{
LCD_WriteRAM(0x0003 << j);
}
}
}
/* Enable DMA2 stream 1 and DCMI interface then start image capture */
DMA_Cmd(DMA2_Stream1, ENABLE);
DCMI_Cmd(ENABLE);
/* Insert 100ms delay: wait 100ms */
//Delay(200);
DCMI_CaptureCmd(ENABLE);
while(1)
{
OV9655_BrightnessConfig(0x7F);//
//static int step = 0;
int i, block, begin;
unsigned short *p;
if (!bShot)
{
begin = (datablock - 11 + 48) % 48;
for (block = begin; block < begin + 11; block++)
{
p = (unsigned short *)(0x20000000 + (320 * 240 * 2 / 16) * ((block) % 12));
LCD_SetDisplayWindow(0, (block % 16) * (240 / 16), 320, (240 / 16));
//LCD_SetCursor(0, (block % 16) * (240 / 16));
LCD_WriteRAM_Prepare();
for (i = 0; i < 320 * 240 / 16; i++)
{
LCD_WriteRAM(*p++);
}
}
}
if (TSC_TouchDet())
{
int x, y;
TP_GetAdXY(&x, &y);
if (x > 300 && x < 2800 && y > 300 && y < 2800)
{
if (x < 1550 && y < 1550)
{
uint32_t StartSector = 0, EndSector = 0, Address = 0, SectorCounter = 0;
int m;
//拍照bShot
bShot = 1;
while(datablock % 16);
DMA_Cmd(DMA2_Stream1, DISABLE);
DCMI_Cmd(DISABLE);
//STM_EVAL_LEDOn(LED2);
DMA_ClearFlag(DMA2_Stream1, 0x2F7D0F7D);
DMA_ClearFlag(DMA2_Stream1, 0x0F7D0F7D);
DMA_ClearITPendingBit(DMA2_Stream1, DMA_IT_TCIF1);
datablock = 0;
DMA2_Stream1->M0AR = 0x20000000 + 9600 * (datablock % 12);
DMA_SetCurrDataCounter(DMA2_Stream1, (320 * 240 * 2 / 4) / 16);
DCMI_Cmd(ENABLE);
DMA_Cmd(DMA2_Stream1, ENABLE);
{
unsigned long *p, *q;
while(datablock < 4); //等待准备好前4块数据，就将这4块数据导入到0x10000000+0x50000之后。
q = (unsigned long *)(0x20000000);
p = (unsigned long *)(0x10000000 + 0x5000);
while (q < (unsigned long *)(0x20000000 + 4 * (320 * 240 * 2 / 16)))
{
*p = *q;
p++;
q++;
}
}
while(datablock < 16); //等待全部采集完成。
STM_EVAL_LEDOn(LED2); //LED2亮表示采集完成。
LCD_SetDisplayWindow(0, 0, 320, 240);
LCD_WriteRAM_Prepare();
LCD_Clear(Black);
//RAM位置
/*
序号 地址 大小
1: 0x10005000+9600*0 9600
2: 0x10005000+9600*1 9600
3: 0x10005000+9600*2 9600
4: 0x10005000+9600*3 9600
5: 0x20000000+9600*5 9600
6: 0x20000000+9600*6 9600
7: 0x20000000+9600*7 9600
8: 0x20000000+9600*8 9600
9: 0x20000000+9600*9 9600
10: 0x20000000+9600*10 9600
11: 0x20000000+9600*11 9600
12: 0x20000000+9600*0 9600
13: 0x20000000+9600*1 9600
14: 0x20000000+9600*2 9600
15: 0x20000000+9600*3 9600
*/
for (m = 0; m < 16; m++) //显示保存的图片
{
unsigned short *q;
if (m < 4)
{
q = (unsigned short *)(0x10000000 + 0x5000 + m * (320 * 240 * 2 / 16));
}
else
{
q = (unsigned short *)(0x20000000 + (m % 12) * (320 * 240 * 2 / 16));
}
LCD_SetDisplayWindow(0, m * (240 / 16), 320, (240 / 16));
LCD_WriteRAM_Prepare();
for (i = 0; i < 320 * 240 / 16; i++)
{
LCD_WriteRAM(*q++);
}
}
/* Erase the user Flash area ***********/
FLASH_Unlock();
/* Clear pending flags (if any) */
FLASH_ClearFlag(FLASH_FLAG_EOP | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR |
FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR|FLASH_FLAG_PGSERR);
/* Get the number of the start and end sectors */
StartSector = GetSector(FLASH_USER_START_ADDR);
EndSector = GetSector(FLASH_USER_END_ADDR);
for (SectorCounter = StartSector; SectorCounter < EndSector; SectorCounter += 8)
{
/* Device voltage range supposed to be [2.7V to 3.6V], the operation will
be done by word */
if (FLASH_EraseSector(SectorCounter, VoltageRange_3) != FLASH_COMPLETE)
{
/* Error occurred while sector erase.
User can add here some code to deal with this error */
while (1)
{
}
}
}
for (m = 0; m < 16; m++) //保存图片到flash
{
unsigned long *q;
Address = FLASH_USER_START_ADDR + m * (320 * 240 * 2 / 16);
if (m < 4)
{
q = (unsigned long *)(0x10000000 + 0x5000 + m * (320 * 240 * 2 / 16));
}
else
{
q = (unsigned long *)(0x20000000 + (m % 12) * (320 * 240 * 2 / 16));
}
while (Address < FLASH_USER_START_ADDR + (m + 1) *(320 * 240 * 2 / 16))
{
if (FLASH_ProgramWord(Address, *q) == FLASH_COMPLETE)
{
Address = Address + 4;
q++;
}
else
{
/* Error occurred while writing data in Flash memory.
User can add here some code to deal with this error */
while (1)
{
}
}
}
}
STM_EVAL_LEDOff(LED2);
LCD_SetDisplayWindow(0, 0, 320, 240);
LCD_WriteRAM_Prepare();
LCD_Clear(Black);
for (m = 0; m < 16; m++) //显示flash中的图片
{
unsigned short *q;
q = (unsigned short *)(FLASH_USER_START_ADDR + m * (320 * 240 * 2 / 16));
LCD_SetDisplayWindow(0, m * (240 / 16), 320, (240 / 16));
LCD_WriteRAM_Prepare();
for (i = 0; i < 320 * 240 / 16; i++)
{
LCD_WriteRAM(*q++);
}
}
/* Lock the Flash to disable the flash control register access (recommended
to protect the FLASH memory against possible unwanted operation) *********/
FLASH_Lock();
}
else if (x >= 1550 && y < 1550)
{
//righttop
STM_EVAL_LEDOff(LED1);
STM_EVAL_LEDOff(LED2);
bShot = 0;
datablock = 0;
DMA_Cmd(DMA2_Stream1, ENABLE);
DCMI_Cmd(ENABLE);
}
else if (x < 1550 && y >= 1550)
{
//righttop
//DMA_Cmd(DMA2_Stream1, ENABLE);
//DCMI_Cmd(ENABLE);
}
else if (x >= 1550 && y >= 1550)
{
//righttop
//DMA_Cmd(DMA2_Stream1, ENABLE);
//DCMI_Cmd(ENABLE);
}
}
}
//Delay(10);
}
}
/*******************************************************************************
* Function Name : Time_Show
* Description : Shows the current time (HH/MM/SS) on LCD.
* Input : None
* Output : None
* Return : None
******************************************************************************/
void Time_Show(void)
{
uint32_t testvalue = 0, pressedkey = 0;
/* Set the Back Color */
LCD_SetBackColor(White);
/* Set the Text Color */
LCD_SetTextColor(Blue);
/* Disable the JoyStick interrupts */
IntExtOnOffConfig(DISABLE);
while(ReadKey()!= NOKEY)
{
}
RCC_AHBPeriphClockCmd(RCC_AHBPeriph_FSMC, ENABLE);
/* Clear the LCD screen */
LCD_Clear(White);
LCD_SetDisplayWindow(160, 223, 128, 128);
LCD_NORDisplay(WATCH_ICON);
RCC_AHBPeriphClockCmd(RCC_AHBPeriph_FSMC, ENABLE);
/* Disable LCD Window mode */
LCD_WindowModeDisable();
if(BKP_ReadBackupRegister(BKP_DR1) != 0xA5A5)
{
LCD_DisplayStringLine(Line7, "Time and Date Config");
LCD_DisplayStringLine(Line8, "Select: Press SEL ");
LCD_DisplayStringLine(Line9, "Abort: Press Any Key");
while(testvalue == 0)
{
pressedkey = ReadKey();
if(pressedkey == SEL)
{
/* Adjust Time */
Time_PreAdjust();
/* Clear the LCD */
LCD_Clear(White);
testvalue = 0x01;
}
else if (pressedkey != NOKEY)
{
/* Clear the LCD */
LCD_ClearLine(Line8);
/* Display the menu */
DisplayMenu();
/* Enable the JoyStick interrupts */
IntExtOnOffConfig(ENABLE);
return;
}
}
/* Display time separators ":" on Line8 */
LCD_DisplayChar(Line8, 212, ':');
LCD_DisplayChar(Line8, 166, ':');
/* Wait a press on any JoyStick pushbuttons */
while(ReadKey() == NOKEY)
{
/* Display current time */
Time_Display(RTC_GetCounter());
}
}
else
{
while(ReadKey() != NOKEY)
{
}
/* Display time separators ":" on Line8 */
LCD_DisplayChar(Line8, 212, ':');
LCD_DisplayChar(Line8, 166, ':');
/* Wait a press on any JoyStick pushbuttons */
while(ReadKey() == NOKEY)
{
/* Display current time */
Time_Display(RTC_GetCounter());
}
}
/* Clear the LCD */
LCD_ClearLine(Line8);
/* Display the menu */
DisplayMenu();
/* Enable the JoyStick interrupts */
IntExtOnOffConfig(ENABLE);
}
static void WidgetFFT_DrawHandler(GL_PageControls_TypeDef* pThis, _Bool force)
{
// Bail if nothing to draw.
if (!force && !DSP_Flag) {
return;
}
int x = pThis->objCoordinates.MinX;
int y = pThis->objCoordinates.MinY;
/*
* Calculate the data to draw:
* - Use FFT_Magnitude[0..127] which is 0 to +4kHz of frequency
* (don't use last half which is -4kHz to 0kHz)
* - Scale the values up to fill a wider portion of the display.
* (by averaging with neighboring data). This helps allow the
* user to tap on frequencies to select them with better resolution.
* - Average with "old" data from the previous pass to give it an
* effective time-based smoothing (as in, display does not change
* as abruptly as it would when using new data samples each time).
*/
//uint8_t FFT_Display[256];
static uint8_t FFT_Output[128]; // static because use last rounds data now.
// TODO: Where are all these FFT constants from?
for (int16_t j = 0; j < 128; j++) {
// Changed for getting right display with SR6.3
// Convert from Q15 (fractional numeric representation) into integer
FFT_Output[j] = (uint8_t) (6 * log((float32_t) (FFT_Magnitude[j] + 1)));
if (FFT_Output[j] > 64)
FFT_Output[j] = 64;
FFT_Display[2 * j] = FFT_Output[j];
// Note that calculation uses values from last pass through.
FFT_Display[2 * j + 1] = 0;
//FFT_Display[2 * j + 1] = (FFT_Output[j] + FFT_Output[j + 1]) / 2;
}
/*
* Display the FFT
* - Drop the bottom 8, and top 8 frequency-display bins to discard
* noisy sections near band edges due to filtering.
*/
float selectedFreqX = (float) (NCO_Frequency - 125) / 15.625;
if (selectedFreqX < 0) {
selectedFreqX = 0;
}
// Draw the FFT using direct memory writes (fast).
LCD_SetDisplayWindow(x, y, FFT_HEIGHT, FFT_WIDTH);
LCD_WriteRAM_PrepareDir(LCD_WriteRAMDir_Down);
for (int x = 0; x < FFT_WIDTH; x++) {
// Plot this column of the FFT.
for (int y = 0; y < FFT_HEIGHT; y++) {
// Draw red line for selected frequency
if (x == (int) selectedFreqX) {
// Leave some white at the top
if (y <= SELFREQ_ADJ) {
LCD_WriteRAM(LCD_COLOR_WHITE);
} else {
LCD_WriteRAM(LCD_COLOR_RED);
}
}
// Draw data
else if (FFT_HEIGHT - y < FFT_Display[x + 8]) {
LCD_WriteRAM(LCD_COLOR_BLUE);
}
// Draw background
else {
LCD_WriteRAM(LCD_COLOR_WHITE);
}
}
}
// Update the frequency offset displayed (text):
static double oldSelectedFreq = -1;
if (force || oldSelectedFreq != NCO_Frequency) {
oldSelectedFreq = NCO_Frequency;
int textY = y + FFT_HEIGHT + TEXT_OFFSET_BELOW_FFT;
int numberX = x + FFT_WIDTH - MAX_FREQ_DIGITS * CHARACTER_WIDTH;
int labelX = numberX - CHARACTER_WIDTH * 8; // 7=# letters in label w/ a space
GL_SetFont(GL_FONTOPTION_8x16);
GL_SetBackColor(LCD_COLOR_BLACK);
GL_SetTextColor(LCD_COLOR_WHITE);
GL_PrintString(labelX, textY, "Offset:", 0);
// Display location on label.
GL_SetTextColor(LCD_COLOR_RED);
char number[MAX_FREQ_DIGITS + 1];
intToCommaString((int)NCO_Frequency, number, MAX_FREQ_DIGITS + 1);
GL_PrintString(numberX, textY, number, 0);
}
DSP_Flag = 0; // added per Charley
}
/**
* @brief Disables LCD Window mode.
* @param None
* @retval None
*/
void GL_LCD_WindowModeDisable(void)
{
LCD_SetDisplayWindow(0, 0, LCD_HEIGHT, LCD_WIDTH);
}
/**
* @brief Sets a display window
* @param Xpos: specifies the X bottom left position.
* @param Ypos: specifies the Y bottom left position.
* @param Height: display window height.
* @param Width: display window width.
* @retval None
*/
void GL_SetDisplayWindow(uint16_t Xpos, uint16_t Ypos, uint16_t Height, uint16_t Width)
{
LCD_SetDisplayWindow(Xpos, Ypos, Height, Width);
}
/*******************************************************************************
* Function Name : Mass_Storage_Start
* Description : Starts the mass storage demo.
* Input : None
* Output : None
* Return : None
*******************************************************************************/
void Mass_Storage_Start (void)
{
NVIC_InitTypeDef NVIC_InitStructure;
/* Disble the JoyStick interrupts */
IntExtOnOffConfig(DISABLE);
while(ReadKey() != NOKEY)
{
}
RCC_AHBPeriphClockCmd(RCC_AHBPeriph_FSMC, ENABLE);
/* Clear the LCD screen */
LCD_Clear(White);
LCD_SetDisplayWindow(160, 223, 128, 128);
LCD_NORDisplay(USB_ICON);
RCC_AHBPeriphClockCmd(RCC_AHBPeriph_FSMC, ENABLE);
/* Disable LCD Window mode */
LCD_WindowModeDisable();
/* Set the Back Color */
LCD_SetBackColor(Blue);
/* Set the Text Color */
LCD_SetTextColor(White);
/* Display the " Plug the USB " message */
LCD_DisplayStringLine(Line8, " Plug the USB Cable ");
LCD_DisplayStringLine(Line9, "Exit: Push JoyStick");
/* Enable and GPIOD clock */
USB_Disconnect_Config();
/* MAL configuration */
MAL_Config();
Set_USBClock();
NVIC_InitStructure.NVIC_IRQChannel = USB_LP_CAN1_RX0_IRQn;
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1;
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1;
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStructure);
NVIC_InitStructure.NVIC_IRQChannel = USB_HP_CAN1_TX_IRQn;
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1;
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStructure);
NVIC_InitStructure.NVIC_IRQChannel = SDIO_IRQn;
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStructure);
USB_Init();
while (bDeviceState != CONFIGURED)
{
if(ReadKey() != NOKEY)
{
PowerOff();
LCD_Clear(White);
DisplayMenu();
IntExtOnOffConfig(ENABLE);
return;
}
}
LCD_ClearLine(Line9);
/* Display the "To stop Press SEL" message */
LCD_DisplayStringLine(Line8, " To stop Press SEL ");
/* Loop until SEL key pressed */
while(ReadKey() != SEL)
{
}
PowerOff();
LCD_Clear(White);
DisplayMenu();
IntExtOnOffConfig(ENABLE);
}
/**
* @brief Main program.
* @param None
* @retval None
*/
int main(void)
{
/*!< At this stage the microcontroller clock setting is already configured,
this is done through SystemInit() function which is called from startup
file (startup_stm32f4xx.s) before to branch to application main.
To reconfigure the default setting of SystemInit() function, refer to
system_stm32f4xx.c file
*/
/* SysTick end of count event each 10ms */
RCC_GetClocksFreq(&RCC_Clocks);
SysTick_Config(RCC_Clocks.HCLK_Frequency / 100);
LIS302DL_Reset();
/* SET USER Key */
/* Configure EXTI Line0 (connected to PA0 pin) in interrupt mode */
EXTILine0_Config();
/* Initialize the LCD */
STM32f4_Discovery_LCD_Init();
LCD_Clear(LCD_COLOR_WHITE);
LCD_SetTextColor(LCD_COLOR_BLUE);
DCMI_Control_IO_Init();
LCD_DisplayStringLine(LINE(2), " Camera Init..");
/* OV9655 Camera Module configuration */
if (DCMI_OV9655Config() == 0x00)
{
LCD_DisplayStringLine(LINE(2), " ");
LCD_SetDisplayWindow(0, 0, 320, 240);
LCD_WriteRAM_Prepare();
/* Start Image capture and Display on the LCD *****************************/
/* Enable DMA transfer */
DMA_Cmd(DMA2_Stream1, ENABLE);
/* Enable DCMI interface */
DCMI_Cmd(ENABLE);
/* Start Image capture */
DCMI_CaptureCmd(ENABLE);
/*init the picture count*/
init_picture_count();
KeyPressFlg = 0;
while (1)
{
/* Insert 100ms delay */
Delay(100);
if (KeyPressFlg) {
KeyPressFlg = 0;
/* press user KEY take a photo */
if (capture_Flag == ENABLE) {
DCMI_CaptureCmd(DISABLE);
capture_Flag = DISABLE;
Capture_Image_TO_Bmp();
LCD_SetDisplayWindow(0, 0, 320, 240);
LCD_WriteRAM_Prepare();
DCMI_CaptureCmd(ENABLE);
capture_Flag = ENABLE;
}
}
}
} else {
LCD_SetTextColor(LCD_COLOR_RED);
LCD_DisplayStringLine(LINE(2), "Camera Init.. fails");
LCD_DisplayStringLine(LINE(4), "Check the Camera HW ");
LCD_DisplayStringLine(LINE(5), " and try again ");
/* Go to infinite loop */
while (1);
}
}
/*******************************************************************************
* Function Name : Thermometer_Temperature
* Description : Displays the temperature in Celsius and fahrenheit degree.
* Input : None
* Output : None
* Return : None
*******************************************************************************/
void Thermometer_Temperature(void)
{
uint32_t i = 0;
while(ReadKey() != NOKEY)
{
}
if(I2C_LM75_Status() == SUCCESS)
{
/* Disable the JoyStick Interrupts */
IntExtOnOffConfig(DISABLE);
/* Clear the LCD */
LCD_Clear(White);
/* Set the Icon display window */
LCD_SetDisplayWindow(150, 210, 64, 84);
/* Display the Thermometer icon */
LCD_DrawBMP(0x0062A300);
/* Disable LCD Window mode */
LCD_WindowModeDisable();
/* Set the Back Color */
LCD_SetBackColor(Red);
/* Set the Text Color */
LCD_SetTextColor(White);
LCD_DisplayStringLine(Line2, " Temperature ");
/* Set the Back Color */
LCD_SetBackColor(Blue);
/* Set the Text Color */
LCD_SetTextColor(Green);
/* Wait until no key is pressed */
while(ReadKey() != NOKEY)
{
}
/* Wait until a key is beiing pressed */
while(ReadKey() == NOKEY)
{
/* Get double of Temperature value */
TempCelsius_Value = I2C_LM75_Temp_Read();
if(TempCelsius_Value <= 1023)
{
/* Positive temperature measured */
TempCelsius_Display[5] = '+';
TempFahrenheit_Display[5] = '+';
}
else
{
/* Negative temperature measured */
TempCelsius_Display[5] = '-';
TempFahrenheit_Display[5] = '-';
/* Remove temperature value sign */
TempCelsius_Value = 0x800 - TempCelsius_Value;
}
/* Calculate temperature digits in °C */
Temp_Decimal = ((TempCelsius_Value & 7) * 1000 / 8);
TempCelsius_Display[10] = (Temp_Decimal / 100) + 0x30;
TempCelsius_Display[11] = ((Temp_Decimal % 100) / 10) + 0x30;
TempCelsius_Display[12] = ((Temp_Decimal % 100) % 10) + 0x30;
TempCelsius_Value >>= 3;
TempCelsius_Display[6] = (TempCelsius_Value / 100) + 0x30;
TempCelsius_Display[7] = ((TempCelsius_Value % 100) / 10) + 0x30;
TempCelsius_Display[8] = ((TempCelsius_Value % 100) % 10) + 0x30;
/* Convert temperature °C to Fahrenheit */
Temp_Value_Fahrenheit = ((9 * ((TempCelsius_Value * 1000) + Temp_Decimal)) / 5) + 32000;
/* Calculate temperature digits in °F */
TempFahrenheit_Display[6] = (Temp_Value_Fahrenheit / 100000) + 0x30;
TempFahrenheit_Display[7] = ((Temp_Value_Fahrenheit % 100000) /10000) + 0x30;
TempFahrenheit_Display[8] = ((Temp_Value_Fahrenheit % 100000) %10000/1000) + 0x30;
TempFahrenheit_Display[10] = ((((Temp_Value_Fahrenheit % 100000) %10000) %1000) /100) + 0x30;
TempFahrenheit_Display[11] = (((((Temp_Value_Fahrenheit % 100000) %10000) %1000) %100) /10) + 0x30;
TempFahrenheit_Display[12] = (((((Temp_Value_Fahrenheit % 100000) %10000) %1000) %100) %10) + 0x30;
/* Display Fahrenheit value on LCD */
for(i = 0; i < 20; i++)
{
LCD_DisplayChar(Line7, (319 - (16 * i)), TempCelsius_Display[i]);
LCD_DisplayChar(Line8, (319 - (16 * i)), TempFahrenheit_Display[i]);
}
}
}
/*******************************************************************************
* Function Name : LCD_WindowModeDisable
* Description : Disables LCD Window mode.
* Input : None
* Output : None
* Return : None
*******************************************************************************/
void LCD_WindowModeDisable(void)
{
LCD_SetDisplayWindow(0, 0, 239, 319);
}
/*******************************************************************************
* Function Name : Alarm_Show
* Description : Shows alarm time (HH/MM/SS) on LCD.
* Input : None
* Output : None
* Return : None
*******************************************************************************/
void Alarm_Show(void)
{
uint32_t tmp = 0;
/* Disable the JoyStick interrupts */
IntExtOnOffConfig(DISABLE);
while(ReadKey() != NOKEY)
{
}
RCC_AHBPeriphClockCmd(RCC_AHBPeriph_FSMC, ENABLE);
/* Clear the LCD screen */
LCD_Clear(White);
LCD_SetDisplayWindow(160, 223, 128, 128);
LCD_NORDisplay(ALARM_ICON);
RCC_AHBPeriphClockCmd(RCC_AHBPeriph_FSMC, ENABLE);
/* Disable LCD Window mode */
LCD_WindowModeDisable();
/* Set the LCD Back Color */
LCD_SetBackColor(Blue);
/* Set the LCD Text Color */
LCD_SetTextColor(White);
if(BKP_ReadBackupRegister(BKP_DR1) != 0xA5A5)
{
LCD_DisplayStringLine(Line8, "Time not configured ");
LCD_DisplayStringLine(Line9, " Press SEL ");
while(ReadKey() == NOKEY)
{
}
/* Clear the LCD */
LCD_Clear(White);
/* Display the menu */
DisplayMenu();
/* Enable the JoyStick interrupts */
IntExtOnOffConfig(ENABLE);
return;
}
/* Read the alarm value stored in the Backup register */
tmp = BKP_ReadBackupRegister(BKP_DR6);
tmp |= BKP_ReadBackupRegister(BKP_DR7) << 16;
LCD_ClearLine(Line8);
/* Display alarm separators ":" on Line2 */
LCD_DisplayChar(Line8, 212, ':');
LCD_DisplayChar(Line8, 166, ':');
/* Display actual alarm value */
Alarm_Display(tmp);
/* Wait a press on pushbuttons */
while(ReadKey() != NOKEY)
{
}
/* Wait a press on pushbuttons */
while(ReadKey() == NOKEY)
{
}
/* Clear the LCD */
LCD_Clear(White);
/* Display the menu */
DisplayMenu();
/* Enable the JoyStick interrupts */
IntExtOnOffConfig(ENABLE);
}
/**
* @brief Main program
* @param None
* @retval None
*/
int main(void)
{
/*!< At this stage the microcontroller clock setting is already configured,
this is done through SystemInit() function which is called from startup
files (startup_stm32f40_41xxx.s/startup_stm32f427_437xx.s/startup_stm32f429_439xx.s)
before to branch to application main.
*/
/* SysTick end of count event each 10ms */
RCC_GetClocksFreq(&RCC_Clocks);
SysTick_Config(RCC_Clocks.HCLK_Frequency / 100);
/* Initialize LEDs mounted on EVAL board */
STM_EVAL_LEDInit(LED1);
STM_EVAL_LEDInit(LED2);
STM_EVAL_LEDInit(LED3);
STM_EVAL_LEDInit(LED4);
STM_EVAL_LEDOn(LED1);
/* Initialize the LCD */
LCD_Init();
LCD_Clear(Black);
LCD_SetTextColor(White);
LCD_LOG_SetHeader((uint8_t*)"STM32 Camera Demo");
LCD_LOG_SetFooter ((uint8_t*)" Copyright (c) STMicroelectronics" );
/* ADC configuration */
ADC_Config();
/* Initializes the DCMI interface (I2C and GPIO) used to configure the camera */
OV2640_HW_Init();
/* Read the OV9655/OV2640 Manufacturer identifier */
OV9655_ReadID(&OV9655_Camera_ID);
OV2640_ReadID(&OV2640_Camera_ID);
if(OV9655_Camera_ID.PID == 0x96)
{
Camera = OV9655_CAMERA;
sprintf((char*)abuffer, "OV9655 Camera ID 0x%x", OV9655_Camera_ID.PID);
ValueMax = 2;
}
else if(OV2640_Camera_ID.PIDH == 0x26)
{
Camera = OV2640_CAMERA;
sprintf((char*)abuffer, "OV2640 Camera ID 0x%x", OV2640_Camera_ID.PIDH);
ValueMax = 2;
}
else
{
LCD_SetTextColor(LCD_COLOR_RED);
LCD_DisplayStringLine(LINE(4), (uint8_t*)"Check the Camera HW and try again");
while(1);
}
LCD_SetTextColor(LCD_COLOR_YELLOW);
LCD_DisplayStringLine(LINE(4), (uint8_t*)abuffer);
LCD_SetTextColor(LCD_COLOR_WHITE);
Delay(200);
/* Initialize demo */
ImageFormat = (ImageFormat_TypeDef)Demo_Init();
/* Configure the Camera module mounted on STM324xG-EVAL/STM324x7I-EVAL boards */
Demo_LCD_Clear();
LCD_DisplayStringLine(LINE(4), (uint8_t*)"Camera Init.. ");
Camera_Config();
sprintf((char*)abuffer, " Image selected: %s", ImageForematArray[ImageFormat]);
LCD_DisplayStringLine(LINE(4),(uint8_t*)abuffer);
/* Enable DMA2 stream 1 and DCMI interface then start image capture */
DMA_Cmd(DMA2_Stream1, ENABLE);
DCMI_Cmd(ENABLE);
/* Insert 100ms delay: wait 100ms */
Delay(200);
DCMI_CaptureCmd(ENABLE);
LCD_ClearLine(LINE(4));
Demo_LCD_Clear();
if(ImageFormat == BMP_QQVGA)
{
/* LCD Display window */
LCD_SetDisplayWindow(179, 239, 120, 160);
LCD_WriteReg(LCD_REG_3, 0x1038);
LCD_WriteRAM_Prepare();
}
else if(ImageFormat == BMP_QVGA)
{
/* LCD Display window */
LCD_SetDisplayWindow(239, 319, 240, 320);
LCD_WriteReg(LCD_REG_3, 0x1038);
LCD_WriteRAM_Prepare();
}
while(1)
{
/* Blink LD1, LED2 and LED4 */
STM_EVAL_LEDToggle(LED1);
STM_EVAL_LEDToggle(LED2);
STM_EVAL_LEDToggle(LED3);
STM_EVAL_LEDToggle(LED4);
/* Insert 100ms delay */
Delay(10);
/* Get the last ADC3 conversion result data */
uhADCVal = ADC_GetConversionValue(ADC3);
/* Change the Brightness of camera using "Brightness Adjustment" register:
For OV9655 camera Brightness can be positively (0x01 ~ 0x7F) and negatively (0x80 ~ 0xFF) adjusted
For OV2640 camera Brightness can be positively (0x20 ~ 0x40) and negatively (0 ~ 0x20) adjusted */
if(Camera == OV9655_CAMERA)
{
OV9655_BrightnessConfig(uhADCVal);
}
if(Camera == OV2640_CAMERA)
{
OV2640_BrightnessConfig(uhADCVal/2);
}
}
}
/*******************************************************************************
* Function Name : Time_PreAdjust
* Description : Returns the time entered by user, using demoboard keys.
* Input : None
* Output : None
* Return : None
*******************************************************************************/
static void Time_PreAdjust(void)
{
RCC_AHBPeriphClockCmd(RCC_AHBPeriph_FSMC, ENABLE);
/* Clear the LCD screen */
LCD_Clear(White);
LCD_SetDisplayWindow(160, 223, 128, 128);
LCD_NORDisplay(WATCH_ICON);
RCC_AHBPeriphClockCmd(RCC_AHBPeriph_FSMC, ENABLE);
/* Disable LCD Window mode */
LCD_WindowModeDisable();
if(BKP_ReadBackupRegister(BKP_DR1) != 0xA5A5)
{
RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR | RCC_APB1Periph_BKP, ENABLE);
/* Allow access to BKP Domain */
PWR_BackupAccessCmd(ENABLE);
LCD_DisplayStringLine(Line7, "RTC Config PLZ Wait.");
/* RTC Configuration */
RTC_Configuration();
LCD_DisplayStringLine(Line7, " TIME ");
/* Clear Line8 */
LCD_ClearLine(Line8);
/* Display time separators ":" on Line4 */
LCD_DisplayChar(Line8, 212, ':');
LCD_DisplayChar(Line8, 166, ':');
/* Display the current time */
Time_Display(RTC_GetCounter());
/* Wait until last write operation on RTC registers has finished */
RTC_WaitForLastTask();
/* Change the current time */
RTC_SetCounter(Time_Regulate());
BKP_WriteBackupRegister(BKP_DR1, 0xA5A5);
/* Clear Line7 */
LCD_ClearLine(Line7);
/* Clear Line8 */
LCD_ClearLine(Line8);
/* Adjust Date */
Date_PreAdjust();
}
else
{
/* Clear Line8 */
LCD_ClearLine(Line8);
/* Display time separators ":" on Line4 */
LCD_DisplayChar(Line8, 212, ':');
LCD_DisplayChar(Line8, 166, ':');
/* Display the current time */
Time_Display(RTC_GetCounter());
/* Wait until last write operation on RTC registers has finished */
RTC_WaitForLastTask();
/* Change the current time */
RTC_SetCounter(Time_Regulate());
}
}
/*******************************************************************************
* Function Name : LCD_WindowModeDisable
* Description : Disables LCD Window mode.
* Input : None
* Output : None
* Return : None
*******************************************************************************/
void LCD_WindowModeDisable(void)
{
LCD_SetDisplayWindow(239, 0x13F, 240, 320);
LCD_WriteReg(R3, 0x1018);
}
static void displayFFT(int x, int y)
{
for (int16_t j = 0; j < 256; j++) {
if (FFT_Filter[j] > 64.0) {
FFT_Display[j] = 64;
} else {
FFT_Display[j] = (uint8_t)FFT_Filter[j];
}
}
/*
* Display the FFT
* - Drop the bottom 8, and top 8 frequency-display bins to discard
* noisy sections near band edges due to filtering.
*/
float selectedFreqX = (float) (NCO_Frequency - 125) / 15.625;
if (selectedFreqX < 0) {
selectedFreqX = 0;
}
NCO_Bin = (int)selectedFreqX + 8;
_Bool isShowingAFOffset = showAFOffsetOnScreen();
if (!WF_Flag) {
// Draw the FFT using direct memory writes (fast).
LCD_SetDisplayWindow(x, y, FFT_HEIGHT, FFT_WIDTH);
LCD_WriteRAM_PrepareDir(LCD_WriteRAMDir_Down);
for (int x = 0; x < FFT_WIDTH; x++) {
// Plot this column of the FFT.
for (int y = 0; y < FFT_HEIGHT; y++) {
// Draw red line for selected frequency
if ((x == (int) (selectedFreqX + 0.5)) && isShowingAFOffset) {
// Leave some white at the top
if (y <= SELFREQ_ADJ) {
LCD_WriteRAM(LCD_COLOR_WHITE);
} else {
LCD_WriteRAM(LCD_COLOR_RED);
}
}
// Draw data
else if (FFT_HEIGHT - y < FFT_Display[x + 8]) {
LCD_WriteRAM(LCD_COLOR_BLUE);
}
// Draw background
else {
LCD_WriteRAM(LCD_COLOR_WHITE);
}
}
}
}
else
{
if (WF_Count == 0) {
// Draw the Waterfall using direct memory writes (fast).
LCD_SetDisplayWindow(x, y, FFT_HEIGHT, FFT_WIDTH);
LCD_WriteRAM_PrepareDir(LCD_WriteRAMDir_Right);
// Send colorized FFT data to Waterfall Buffer
for (int x = 0; x < FFT_WIDTH; x++)
{
*(pWFBfr + (FFT_WIDTH*WF_Line0) + x) = WFPalette[(FFT_Display[x + 8] )];
}
// Refresh the waterfall display--scrolling begins after 64 lines
for (int y = WF_Line0; y < FFT_HEIGHT; y++) {
for (int x = 0; x <FFT_WIDTH; x++) {
if (x == (int)(selectedFreqX +0.5) && isShowingAFOffset) {
//LCD_WriteRAM(LCD_COLOR_RED);
LCD_WriteRAM(LCD_COLOR_WHITE);
}
else {
LCD_WriteRAM(*(pWFBfr + y*FFT_WIDTH + x));
}
}
}
for ( int y = 0; y < WF_Line0; y++) {
for (int x = 0; x < FFT_WIDTH; x++) {
if (x == (int)(selectedFreqX +0.5) && isShowingAFOffset) {
//LCD_WriteRAM(LCD_COLOR_RED);
LCD_WriteRAM(LCD_COLOR_WHITE);
}
else {
LCD_WriteRAM(*(pWFBfr + y*FFT_WIDTH + x));
}
}
}
}
if (++WF_Count == MAX_WF_COUNT) {
WF_Count = 0;
WF_Line0--;
if (WF_Line0 < 0) WF_Line0 = FFT_HEIGHT-1;
}
}
}
