/************************************************************************************
*
* ***********************************************************************************/
IPState ScopeDome::sendMove(double azDiff)
{
int rc;
if (azDiff < 0)
{
uint16_t steps = (uint16_t)(-azDiff * stepsPerTurn / 360.0);
LOGF_DEBUG("CCW (%d)", steps);
steps = compensateInertia(steps);
LOGF_DEBUG("CCW inertia (%d)", steps);
if (steps == 0)
return IPS_OK;
rc = writeU16(CCWRotation, steps);
}
else
{
uint16_t steps = (uint16_t)(azDiff * stepsPerTurn / 360.0);
LOGF_DEBUG("CW (%d)", steps);
steps = compensateInertia(steps);
LOGF_DEBUG("CW inertia (%d)", steps);
if (steps == 0)
return IPS_OK;
rc = writeU16(CWRotation, steps);
}
if (rc != 0)
{
LOGF_ERROR("Error moving dome: %d", rc);
}
return IPS_BUSY;
}
bool FishCampCCD::StartExposure(float duration)
{
PrimaryCCD.setExposureDuration(duration);
ExposureRequest = duration;
bool rc = false;
LOGF_DEBUG("Exposure Time (s) is: %g", duration);
// setup the exposure time in ms.
rc = fcUsb_cmd_setIntegrationTime(cameraNum, (UInt32)(duration * 1000.0));
LOGF_DEBUG("fcUsb_cmd_setIntegrationTime returns %d", rc);
rc = fcUsb_cmd_startExposure(cameraNum);
LOGF_DEBUG("fcUsb_cmd_startExposure returns %d", rc);
gettimeofday(&ExpStart, nullptr);
LOGF_INFO("Taking a %g seconds frame...", ExposureRequest);
InExposure = true;
return (rc == 0);
}
bool lacerta_mfoc::SetBacklash(double values[], char *names[], int n)
{
LOGF_DEBUG("-> BACKLASH_SETTINGS", 0);
char MFOC_cmd[32] = ": B ";
char MFOC_res[32] = {0};
int nbytes_read = 0;
int nbytes_written = 0;
int MFOC_tdir_measd = 0;
int bl_int = 0;
char bl_char[32] = {0};
char MFOC_res_type[32] = "0";
BacklashNP.s = IPS_OK;
IUUpdateNumber(&BacklashNP, values, names, n);
bl_int = BacklashN[0].value;
sprintf(bl_char, "%d", bl_int);
strcat(bl_char, " #");
strcat(MFOC_cmd, bl_char);
tty_write_string(PortFD, MFOC_cmd, &nbytes_written);
LOGF_DEBUG("CMD <%s>", MFOC_cmd);
tty_write_string(PortFD, ": J #", &nbytes_written);
tty_read_section(PortFD, MFOC_res, 0xD, FOCUSMFOC_TIMEOUT, &nbytes_read);
sscanf (MFOC_res, "%s %d", MFOC_res_type, &MFOC_tdir_measd);
LOGF_DEBUG("RES <%s>", MFOC_res);
IDSetNumber(&BacklashNP, nullptr);
return true;
}
int Arduino::closePort()
{
if (strcmp(serialPort, "indi") == 0) return 0; // do not close port that we did not open
int rv = 0;
rv |= flushPort();
if (fd < 0)
{
LOGF_DEBUG("Connection to %s already closed", serialPort);
rv |= -1;
}
else if (tcsetattr(fd, TCSAFLUSH, &oldterm) < 0)
{
LOGF_DEBUG("Arduino::closePort():tcsetattr():%s", strerror(errno));
rv |= -2;
if (close(fd) < 0)
{
LOGF_DEBUG("Arduino::closePort():close():%s", strerror(errno));
rv |= -4;
}
else
{
fd = -1;
}
}
return (rv);
}
// Send a command to the mount. Return the number of bytes received or 0 if
// case of error
// commands are null terminated, replies end with /n
int QFW::send_command(int fd, const char* cmd, char *resp)
{
int err;
int nbytes = 0;
char errmsg[MAXRBUF];
int cmd_len = strlen(cmd);
char dmp[255];
dump(dmp, cmd);
LOGF_DEBUG("CMD <%s>", dmp);
tcflush(fd, TCIOFLUSH);
if ((err = tty_write(fd, cmd, cmd_len, &nbytes)) != TTY_OK)
{
tty_error_msg(err, errmsg, MAXRBUF);
LOGF_ERROR("Serial write error: %s", errmsg);
return 0;
}
err = tty_read_section(fd, resp, '\n', QUANTUM_TIMEOUT, &nbytes);
if (err)
{
tty_error_msg(err, errmsg, MAXRBUF);
LOGF_ERROR("Serial read error: %s", errmsg);
return 0;
}
resp[nbytes] = 0;
dump(dmp, resp);
LOGF_DEBUG("RES <%s>", dmp);
return nbytes;
}
bool ArmPlat::slpSendRxInt( char *command, int *rcode )
{
int nbytes_wrrd = 0;
int rc;
char errstr[MAXRBUF];
char res[SLP_SEND_BUF_SIZE]={0};
LOGF_DEBUG("Tx [%s]", command);
//tty_set_debug( 1 );
if ((rc = tty_write_string(PortFD, command, &nbytes_wrrd)) != TTY_OK)
{
tty_error_msg(rc, errstr, MAXRBUF);
//IDLog( "ERROR Tx: <%s>\n", errstr );
LOGF_ERROR("Send error: %s.", errstr);
return false;
}
if ((rc = tty_read_section(PortFD, res, '#', ArmPlat_TIMEOUT, &nbytes_wrrd)) != TTY_OK)
{
tty_error_msg(rc, errstr, MAXRBUF);
//IDLog( "ERROR Rx: <%s> error msg <%s>\n", res, errstr );
LOGF_ERROR("Echo receiving error: %s.", errstr);
return false;
}
LOGF_DEBUG("Rx [%s]", res);
//if ( ( strstr( command, "getpos" ) == nullptr ) && ( strstr( command, "temps" ) == nullptr ) )
//IDLog( "Rx: <%s>\n", res );
return getIntResultCode( command, res, rcode );
}
IPState WeatherSafetyProxy::executeCurl()
{
CURL *curl_handle;
CURLcode res;
std::string readBuffer;
curl_handle = curl_easy_init();
if (curl_handle)
{
curl_easy_setopt(curl_handle, CURLOPT_URL, UrlT[WSP_URL].text);
curl_easy_setopt(curl_handle, CURLOPT_WRITEFUNCTION, WSP_WriteCallback);
curl_easy_setopt(curl_handle, CURLOPT_WRITEDATA, &readBuffer);
curl_easy_setopt(curl_handle, CURLOPT_USERAGENT, "libcurl-agent/1.0");
LOGF_DEBUG("Call curl %s", UrlT[WSP_URL].text);
res = curl_easy_perform(curl_handle);
if (res != CURLE_OK)
{
LOGF_ERROR("curl_easy_perform failed with [%s]", curl_easy_strerror(res));
return IPS_ALERT;
}
curl_easy_cleanup(curl_handle);
LOGF_DEBUG("Read %d bytes output [%s]", readBuffer.size(), readBuffer.c_str());
return parseSafetyJSON(readBuffer.c_str(), readBuffer.size());
}
else
{
LOG_ERROR("curl_easy_init failed");
return IPS_ALERT;
}
}
IPState WeatherSafetyProxy::executeScript()
{
char *cmd = ScriptsT[WSP_SCRIPT].text;
if (access(cmd, F_OK|X_OK) == -1)
{
LOGF_ERROR("Cannot use script [%s], check its existence and permissions", cmd);
LastParseSuccess = false;
return IPS_ALERT;
}
LOGF_DEBUG("Run script: %s", cmd);
FILE *handle = popen(cmd, "r");
if (handle == nullptr)
{
LOGF_ERROR("Failed to run script [%s]", strerror(errno));
LastParseSuccess = false;
return IPS_ALERT;
}
char buf[BUFSIZ];
size_t byte_count = fread(buf, 1, BUFSIZ - 1, handle);
fclose(handle);
buf[byte_count] = 0;
if (byte_count == 0)
{
LOGF_ERROR("Got no output from script [%s]", cmd);
LastParseSuccess = false;
return IPS_ALERT;
}
LOGF_DEBUG("Read %d bytes output [%s]", byte_count, buf);
return parseSafetyJSON(buf, byte_count);
}
bool lacerta_mfoc::SetTempComp(double values[], char *names[], int n)
{
LOGF_INFO("-> TEMPCOMP_SETTINGS", 0);
char MFOC_cmd[32] = ": D ";
char MFOC_res[32] = {0};
int nbytes_read = 0;
int nbytes_written = 0;
int MFOC_tc_measd = 0;
int tc_int = 0;
char tc_char[32] = {0};
char MFOC_res_type[32] = "0";
TempCompNP.s = IPS_OK;
IUUpdateNumber(&TempCompNP, values, names, n);
tc_int = TempCompN[0].value;
sprintf(tc_char, "%d", tc_int);
strcat(tc_char, " #");
strcat(MFOC_cmd, tc_char);
tty_write_string(PortFD, MFOC_cmd, &nbytes_written);
LOGF_DEBUG("CMD <%s>", MFOC_cmd);
tty_write_string(PortFD, ": U #", &nbytes_written);
tty_read_section(PortFD, MFOC_res, 0xD, FOCUSMFOC_TIMEOUT, &nbytes_read);
sscanf (MFOC_res, "%s %d", MFOC_res_type, &MFOC_tc_measd);
LOGF_DEBUG("RES <%s>", MFOC_res);
IDSetNumber(&TempCompNP, nullptr);
return true;
}
bool lacerta_mfoc::SetFocuserMaxPosition(uint32_t ticks)
{
char MFOC_cmd[32] = ": G ";
char MFOC_res[32] = {0};
int nbytes_read = 0;
int nbytes_written = 0;
int MFOC_pm_measd = 0;
char pm_char[32] = {0};
char MFOC_res_type[32] = "0";
sprintf(pm_char, "%d", ticks);
strcat(pm_char, " #");
strcat(MFOC_cmd, pm_char);
tty_write_string(PortFD, MFOC_cmd, &nbytes_written);
LOGF_DEBUG("CMD <%s>", MFOC_cmd);
tty_write_string(PortFD, ": O #", &nbytes_written);
tty_read_section(PortFD, MFOC_res, 0xD, FOCUSMFOC_TIMEOUT, &nbytes_read);
sscanf (MFOC_res, "%s %d", MFOC_res_type, &MFOC_pm_measd);
LOGF_DEBUG("RES <%s>", MFOC_res);
return true;
}
bool SynscanDriver::sendCommand(const char * cmd, char * res, int cmd_len, int res_len)
{
int nbytes_written = 0, nbytes_read = 0, rc = -1;
tcflush(PortFD, TCIOFLUSH);
if (cmd_len > 0)
{
char hex_cmd[SYN_RES * 3] = {0};
hexDump(hex_cmd, cmd, cmd_len);
LOGF_DEBUG("CMD <%s>", hex_cmd);
rc = tty_write(PortFD, cmd, cmd_len, &nbytes_written);
}
else
{
LOGF_DEBUG("CMD <%s>", cmd);
rc = tty_write_string(PortFD, cmd, &nbytes_written);
}
if (rc != TTY_OK)
{
char errstr[MAXRBUF] = {0};
tty_error_msg(rc, errstr, MAXRBUF);
LOGF_ERROR("Serial write error: %s.", errstr);
return false;
}
if (res == nullptr)
return true;
if (res_len > 0)
rc = tty_read(PortFD, res, res_len, SYN_TIMEOUT, &nbytes_read);
else
rc = tty_nread_section(PortFD, res, SYN_RES, SYN_DEL, SYN_TIMEOUT, &nbytes_read);
if (rc != TTY_OK)
{
char errstr[MAXRBUF] = {0};
tty_error_msg(rc, errstr, MAXRBUF);
LOGF_ERROR("Serial read error: %s.", errstr);
return false;
}
if (res_len > 0)
{
char hex_res[SYN_RES * 3] = {0};
hexDump(hex_res, res, res_len);
LOGF_DEBUG("RES <%s>", hex_res);
}
else
{
LOGF_DEBUG("RES <%s>", res);
}
tcflush(PortFD, TCIOFLUSH);
return true;
}
int Arduino::sendUchar(const unsigned char data)
{
#ifdef DEBUG
LOGF_DEBUG("Arduino::sendUchar sending: 0x%02x", data);
#endif // DEBUG
if (write(fd, &data, sizeof(char)) < 0)
{
LOGF_DEBUG("Arduino::sendUchar():write():%s", strerror(errno));
LOGF_DEBUG("during write 0x%02x (%c)", data, data);
return (-1);
}
usleep(100);
return (0);
}
bool MoonLiteDRO::updateStepDelay()
{
int nbytes_written = 0, nbytes_read = 0, rc = -1;
char errstr[MAXRBUF];
char resp[3]={0};
char cmd[DRO_CMD]={0};
short speed;
if (m_ID == 1)
strncpy(cmd, ":GD#", DRO_CMD);
else
strncpy(cmd, ":2GD#", DRO_CMD);
LOGF_DEBUG("CMD <%s>", cmd);
tcflush(PortFD, TCIOFLUSH);
if ((rc = tty_write_string(PortFD, cmd, &nbytes_written)) != TTY_OK)
{
tty_error_msg(rc, errstr, MAXRBUF);
LOGF_ERROR("updateStepDelay error: %s.", errstr);
return false;
}
if ((rc = tty_read_section(PortFD, resp, '#', MOONLITEDRO_TIMEOUT, &nbytes_read)) != TTY_OK)
{
tty_error_msg(rc, errstr, MAXRBUF);
LOGF_ERROR("updateStepDelay error: %s.", errstr);
return false;
}
tcflush(PortFD, TCIOFLUSH);
LOGF_DEBUG("RES <%s>", resp);
rc = sscanf(resp, "%hX", &speed);
if (rc > 0)
{
int focus_speed = -1;
while (speed > 0)
{
speed >>= 1;
focus_speed++;
}
StepDelayN[0].value = focus_speed;
}
bool SynscanDriver::passThruCommand(int cmd, int target, int msgsize, int data, int numReturn)
{
char test[20] = {0};
int bytesRead, bytesWritten;
char a, b, c;
int tt = data;
a = tt % 256;
tt = tt >> 8;
b = tt % 256;
tt = tt >> 8;
c = tt % 256;
// format up a passthru command
memset(test, 0, 20);
test[0] = 80; // passhtru
test[1] = msgsize; // set message size
test[2] = target; // set the target
test[3] = cmd; // set the command
test[4] = c; // set data bytes
test[5] = b;
test[6] = a;
test[7] = numReturn;
LOGF_DEBUG("CMD <%s>", test);
tty_write(PortFD, test, 8, &bytesWritten);
memset(test, 0, 20);
tty_read(PortFD, test, numReturn + 1, 2, &bytesRead);
LOGF_DEBUG("RES <%s>", test);
if (numReturn > 0)
{
int retval = 0;
retval = test[0];
if (numReturn > 1)
{
retval = retval << 8;
retval += test[1];
}
if (numReturn > 2)
{
retval = retval << 8;
retval += test[2];
}
return retval;
}
return 0;
}
bool ArmPlat::setTempSensorInUse( uint16_t sensor )
{
LOGF_DEBUG("Temp sensor set to %d", sensor );
tempSensInUse = sensor;
return true;
}
bool TCFS::read_tcfs(char *response, bool silent)
{
int err_code = 0, nbytes_read = 0;
char err_msg[TCFS_ERROR_BUFFER];
if (isSimulation())
{
strncpy(response, "SIMULATION", TCFS_MAX_CMD);
return true;
}
// Read until encountring a CR
if ((err_code = tty_read_section(PortFD, response, 0x0D, 2, &nbytes_read)) != TTY_OK)
{
if (!silent)
{
tty_error_msg(err_code, err_msg, 32);
LOGF_ERROR("TTY error detected: %s", err_msg);
}
return false;
}
// Remove LF & CR
response[nbytes_read - 2] = '\0';
LOGF_DEBUG("RES <%s>", response);
return true;
}
bool TCFS::Handshake()
{
LOGF_DEBUG("%s %s",__FUNCTION__, me);
if (isSimulation())
{
LOG_INFO("TCF-S: Simulating connection.");
currentPosition = simulated_position;
return true;
}
char response[TCFS_MAX_CMD] = { 0 };
if(SetManualMode())
{
dispatch_command(FWAKUP);
read_tcfs(response);
tcflush(PortFD, TCIOFLUSH);
LOG_INFO("Successfully connected to TCF-S Focuser in Manual Mode.");
// Enable temperature readout
FocusTemperatureNP.s = IPS_OK;
return true;
}
tcflush(PortFD, TCIOFLUSH);
LOG_ERROR("Failed connection to TCF-S Focuser.");
return false;
}
bool MICCD::UpdateCCDFrame(int x, int y, int w, int h)
{
/* Add the X and Y offsets */
long x_1 = x / PrimaryCCD.getBinX();
long y_1 = y / PrimaryCCD.getBinY();
long x_2 = x_1 + (w / PrimaryCCD.getBinX());
long y_2 = y_1 + (h / PrimaryCCD.getBinY());
if (x_2 > PrimaryCCD.getXRes())
{
LOGF_ERROR("Error: Requested width out of bounds %ld", x_2);
return false;
}
else if (y_2 > PrimaryCCD.getYRes())
{
LOGF_ERROR("Error: Requested height out of bounds %ld", y_2);
return false;
}
LOGF_DEBUG("The Final image area is (%ld, %ld), (%ld, %ld)\n", x_1, y_1, x_2, y_2);
int imageWidth = x_2 - x_1;
int imageHeight = y_2 - y_1;
// Set UNBINNED coords
PrimaryCCD.setFrame(x, y, w, h);
PrimaryCCD.setFrameBufferSize(imageWidth * imageHeight * PrimaryCCD.getBPP() / 8);
return true;
}
IPState ArmPlat::MoveRelFocuser(FocusDirection dir, uint32_t ticks)
{
//IDLog( "Rel focuser move %d %d\n", (int)dir, ticks );
if ( port == -1 )
return IPS_ALERT;
int rc = -1;
int realticks;
char cmd[SLP_SEND_BUF_SIZE]={0};
if (dir == FOCUS_INWARD)
realticks = -ticks;
else
realticks = ticks;
LOGF_DEBUG("Rel move to %d", realticks );
sprintf(cmd, "!step gopr %d %d#", port, realticks );
if ( slpSendRxInt( cmd, &rc ) )
{
if ( rc == 0 )
{
isMoving = true;
FocusRelPosN[0].value = ticks;
FocusRelPosNP.s = IPS_BUSY;
return IPS_BUSY;
}
}
return IPS_ALERT;
}
bool MICCD::StartExposure(float duration)
{
imageFrameType = PrimaryCCD.getFrameType();
useShutter = (imageFrameType == INDI::CCDChip::LIGHT_FRAME || imageFrameType == INDI::CCDChip::FLAT_FRAME);
if (!isSimulation())
{
// read modes in G2/G3/G4 cameras are in inverse order, we have to calculate correct value
int mode, prm;
gxccd_get_integer_parameter(cameraHandle, GIP_PREVIEW_READ_MODE, &prm);
if (prm == 0) // preview mode == 0 means smaller G0/G1 cameras
mode = IUFindOnSwitchIndex(&ReadModeSP);
else
mode = prm - IUFindOnSwitchIndex(&ReadModeSP);
gxccd_set_read_mode(cameraHandle, mode);
// send binned coords
int x = PrimaryCCD.getSubX() / PrimaryCCD.getBinX();
int y = PrimaryCCD.getSubY() / PrimaryCCD.getBinY();
int w = PrimaryCCD.getSubW() / PrimaryCCD.getBinX();
int d = PrimaryCCD.getSubH() / PrimaryCCD.getBinY();
gxccd_start_exposure(cameraHandle, duration, useShutter, x, y, w, d);
}
ExposureRequest = duration;
PrimaryCCD.setExposureDuration(duration);
gettimeofday(&ExpStart, nullptr);
InExposure = true;
downloading = false;
LOGF_DEBUG("Taking a %.3f seconds frame...", ExposureRequest);
return true;
}
bool ATIKCCD::Disconnect()
{
ImageState tState;
LOGF_DEBUG("Closing %s...", name);
stopTimerNS();
stopTimerWE();
RemoveTimer(genTimerID);
genTimerID = -1;
pthread_mutex_lock(&condMutex);
tState = threadState;
threadRequest = StateTerminate;
pthread_cond_signal(&cv);
pthread_mutex_unlock(&condMutex);
pthread_join(imagingThread, nullptr);
tState = StateNone;
if (isSimulation() == false)
{
if (tState == StateExposure)
ArtemisStopExposure(hCam);
ArtemisDisconnect(hCam);
}
LOG_INFO("Camera is offline.");
return true;
}
IPState lacerta_mfoc::MoveAbsFocuser(uint32_t targetTicks)
{
char MFOC_cmd[32] = ": M ";
char abs_pos_char[32] = {0};
int nbytes_written = 0;
//int pos = GetAbsFocuserPosition();
sprintf(abs_pos_char, "%d", targetTicks);
strcat(abs_pos_char, " #");
strcat(MFOC_cmd, abs_pos_char);
tty_write_string(PortFD, MFOC_cmd, &nbytes_written);
LOGF_DEBUG("CMD <%s>", MFOC_cmd);
//Waiting makes no sense - will be immediatly interrupted by the ekos system...
//int ticks = std::abs((int)(targetTicks - pos) * FOCUS_MOTION_DELAY);
//LOGF_INFO("sleep for %d ms", ticks);
//usleep(ticks + 5000);
FocusAbsPosN[0].value = targetTicks;
//only for debugging! Maybe there is a bug in the MFOC firmware command "Q #"!
GetAbsFocuserPosition();
return IPS_OK;
}
bool SynscanDriver::SetCurrentPark()
{
char res[SYN_RES] = {0};
// Get Current Az/Alt
memset(res, 0, SYN_RES);
if (!sendCommand("z", res))
return false;
uint32_t n1 = 0, n2 = 0;
sscanf(res, "%ux,%ux#", &n1, &n2);
double az = static_cast<double>(n1) / 0x100000000 * 360.0;
double al = static_cast<double>(n2) / 0x100000000 * 360.0;
al = rangeDec(al);
char AzStr[16], AltStr[16];
fs_sexa(AzStr, az, 2, 3600);
fs_sexa(AltStr, al, 2, 3600);
LOGF_DEBUG("Setting current parking position to coordinates Az (%s) Alt (%s)...", AzStr, AltStr);
SetAxis1Park(az);
SetAxis2Park(al);
return true;
}
bool SynscanDriver::Sync(double ra, double dec)
{
char cmd[SYN_RES] = {0}, res[SYN_RES] = {0};
TargetRA = ra;
TargetDE = dec;
if (isSimulation())
return true;
// INDI is JNow. Synscan Controll uses J2000 Epoch
ln_equ_posn epochPos { 0, 0 }, J2000Pos { 0, 0 };
epochPos.ra = ra * 15.0;
epochPos.dec = dec;
// Synscan accepts J2000 coordinates so we need to convert from JNow to J2000
ln_get_equ_prec2(&epochPos, ln_get_julian_from_sys(), JD2000, &J2000Pos);
// Mount deals in J2000 coords.
uint32_t n1 = J2000Pos.ra / 360 * 0x100000000;
uint32_t n2 = J2000Pos.dec / 360 * 0x100000000;
LOGF_DEBUG("Sync - JNow RA: %g JNow DE: %g J2000 RA: %g J2000 DE: %g", ra, dec, J2000Pos.ra / 15.0, J2000Pos.dec);
snprintf(cmd, SYN_RES, "s%08X,%08X", n1, n2);
return sendCommand(cmd, res, 18);
}
bool lacerta_mfoc::Handshake()
{
char MFOC_cmd[32] = ": Q #";
char MFOC_res[32] = {0};
char MFOC_res_type[32] = "0";
int MFOC_pos_measd = 0;
int nbytes_written = 0;
int nbytes_read = 0;
tty_write_string(PortFD, MFOC_cmd, &nbytes_written);
LOGF_INFO("CMD <%s>", MFOC_cmd);
tty_read_section(PortFD, MFOC_res, 0xD, FOCUSMFOC_TIMEOUT, &nbytes_read);
LOGF_DEBUG("RES <%s>", MFOC_res_type);
sscanf(MFOC_res, "%s %d", MFOC_res_type, &MFOC_pos_measd);
if (MFOC_res_type[0] == 'P')
{
FocusAbsPosN[0].value = MFOC_pos_measd;
FocusAbsPosNP.s = IPS_OK;
return true;
}
return false;
}
bool FishCampCCD::setGain(double gain)
{
int rc = fcUsb_cmd_setCameraGain(cameraNum, ((int)gain));
LOGF_DEBUG("fcUsb_cmd_setCameraGain returns %d", rc);
return true;
}
bool Paramount::Handshake()
{
if (isSimulation())
return true;
int rc = 0, nbytes_written = 0, nbytes_read = 0;
char pCMD[MAXRBUF]={0}, pRES[MAXRBUF]={0};
strncpy(pCMD,
"/* Java Script */"
"var Out;"
"sky6RASCOMTele.ConnectAndDoNotUnpark();"
"Out = sky6RASCOMTele.IsConnected;",
MAXRBUF);
LOGF_DEBUG("CMD: %s", pCMD);
if ((rc = tty_write_string(PortFD, pCMD, &nbytes_written)) != TTY_OK)
{
LOG_ERROR("Error writing to TheSky6 TCP server.");
return false;
}
// Should we read until we encounter string terminator? or what?
if (static_cast<int>(rc == tty_read_section(PortFD, pRES, '\0', PARAMOUNT_TIMEOUT, &nbytes_read)) != TTY_OK)
{
LOG_ERROR("Error reading from TheSky6 TCP server.");
return false;
}
LOGF_DEBUG("RES: %s", pRES);
int isTelescopeConnected = -1;
std::regex rgx(R"((\d+)\|(.+)\. Error = (\d+)\.)");
std::smatch match;
std::string input(pRES);
if (std::regex_search(input, match, rgx))
isTelescopeConnected = atoi(match.str(1).c_str());
if (isTelescopeConnected <= 0)
{
LOGF_ERROR("Error connecting to telescope: %s (%d).", match.str(1).c_str(),
atoi(match.str(2).c_str()));
return false;
}
int Arduino::flushPort()
{
if (tcflush(fd, TCIFLUSH) < 0)
{
LOGF_DEBUG("Arduino::flushPort():tcflush():%s", strerror(errno));
return (-1);
}
return (0);
}
bool QHYCFW2::SelectFilter(int f)
{
TargetFilter = f;
char cmd[8] = {0}, res[8]={0};
int rc = -1, nbytes_written=0, nbytes_read=0;
LOGF_DEBUG("CMD <%d>", TargetFilter-1);
snprintf(cmd, 2, "%d", TargetFilter-1);
if (isSimulation())
snprintf(res, 8, "%d", TargetFilter-1);
else
{
if ((rc = tty_write_string(PortFD, cmd, &nbytes_written)) != TTY_OK)
{
char error_message[ERRMSG_SIZE];
tty_error_msg(rc, error_message, ERRMSG_SIZE);
LOGF_ERROR("Sending command select filter failed: %s", error_message);
return false;
}
if ((rc = tty_read(PortFD, res, 1, 30, &nbytes_read)) != TTY_OK)
{
char error_message[ERRMSG_SIZE];
tty_error_msg(rc, error_message, ERRMSG_SIZE);
LOGF_ERROR("Reading select filter response failed: %s", error_message);
return false;
}
LOGF_DEBUG("RES <%s>", res);
}
if (atoi(res)+1 == TargetFilter)
{
CurrentFilter = TargetFilter;
SelectFilterDone(CurrentFilter);
return true;
}
return false;
}
bool ATIKCCD::StartExposure(float duration)
{
PrimaryCCD.setExposureDuration(duration);
ExposureRequest = duration;
// Camera needs to be in idle state to start exposure after previous abort
int maxWaitCount = 1000; // 1000 * 0.1s = 100s
while (ArtemisCameraState(hCam) != CAMERA_IDLE && --maxWaitCount > 0)
{
LOG_DEBUG("Waiting camera to be idle...");
usleep(100000);
}
if (maxWaitCount == 0)
{
LOG_ERROR("Camera not in idle state, can't start exposure");
return false;
}
LOGF_DEBUG("Start Exposure : %.3fs", duration);
// if (m_CameraFlags & ARTEMIS_PROPERTIES_CAMERAFLAGS_HAS_SHUTTER)
// {
// if (PrimaryCCD.getFrameType() == INDI::CCDChip::DARK_FRAME ||
// PrimaryCCD.getFrameType() == INDI::CCDChip::BIAS_FRAME)
// {
// ArtemisCloseShutter(hCam);
// }
// else
// {
// ArtemisOpenShutter(hCam);
// }
// }
ArtemisSetDarkMode(hCam, PrimaryCCD.getFrameType() == INDI::CCDChip::DARK_FRAME ||
PrimaryCCD.getFrameType() == INDI::CCDChip::BIAS_FRAME);
int rc = ArtemisStartExposure(hCam, duration);
if (rc != ARTEMIS_OK)
{
LOGF_ERROR("Failed to start exposure (%d).", rc);
return false;
}
gettimeofday(&ExpStart, nullptr);
if (ExposureRequest > VERBOSE_EXPOSURE)
LOGF_INFO("Taking a %g seconds frame...", ExposureRequest);
InExposure = true;
pthread_mutex_lock(&condMutex);
threadRequest = StateExposure;
pthread_cond_signal(&cv);
pthread_mutex_unlock(&condMutex);
return true;
}
