PCB_EDIT_FRAME::PCB_EDIT_FRAME( KIWAY* aKiway, wxWindow* aParent ) :
PCB_BASE_EDIT_FRAME( aKiway, aParent, FRAME_PCB, wxT( "Pcbnew" ), wxDefaultPosition,
wxDefaultSize, KICAD_DEFAULT_DRAWFRAME_STYLE, PCB_EDIT_FRAME_NAME )
{
m_showBorderAndTitleBlock = true; // true to display sheet references
m_showAxis = false; // true to display X and Y axis
m_showOriginAxis = true;
m_showGridAxis = true;
m_SelTrackWidthBox = NULL;
m_SelViaSizeBox = NULL;
m_SelLayerBox = NULL;
m_show_microwave_tools = false;
m_show_layer_manager_tools = true;
m_hotkeysDescrList = g_Board_Editor_Hokeys_Descr;
m_hasAutoSave = true;
m_RecordingMacros = -1;
m_microWaveToolBar = NULL;
m_rotationAngle = 900;
for ( int i = 0; i < 10; i++ )
m_Macros[i].m_Record.clear();
// Create GAL canvas
EDA_DRAW_PANEL_GAL* galCanvas = new PCB_DRAW_PANEL_GAL( this, -1, wxPoint( 0, 0 ),
m_FrameSize, EDA_DRAW_PANEL_GAL::GAL_TYPE_NONE );
SetGalCanvas( galCanvas );
SetBoard( new BOARD() );
// Create the PCB_LAYER_WIDGET *after* SetBoard():
wxFont font = wxSystemSettings::GetFont( wxSYS_DEFAULT_GUI_FONT );
int pointSize = font.GetPointSize();
int screenHeight = wxSystemSettings::GetMetric( wxSYS_SCREEN_Y );
// printf( "pointSize:%d 80%%:%d\n", pointSize, (pointSize*8)/10 );
if( screenHeight <= 900 )
pointSize = (pointSize * 8) / 10;
m_Layers = new PCB_LAYER_WIDGET( this, GetCanvas(), pointSize );
m_drc = new DRC( this ); // these 2 objects point to each other
wxIcon icon;
icon.CopyFromBitmap( KiBitmap( icon_pcbnew_xpm ) );
SetIcon( icon );
// LoadSettings() *after* creating m_LayersManager, because LoadSettings()
// initialize parameters in m_LayersManager
LoadSettings( config() );
SetScreen( new PCB_SCREEN( GetPageSettings().GetSizeIU() ) );
GetScreen()->SetMaxUndoItems( m_UndoRedoCountMax );
// PCB drawings start in the upper left corner.
GetScreen()->m_Center = false;
SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y );
GetScreen()->AddGrid( m_UserGridSize, m_UserGridUnit, ID_POPUP_GRID_USER );
GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId );
if( m_canvas )
m_canvas->SetEnableBlockCommands( true );
ReCreateMenuBar();
ReCreateHToolbar();
ReCreateAuxiliaryToolbar();
ReCreateVToolbar();
ReCreateOptToolbar();
ReCreateMicrowaveVToolbar();
m_auimgr.SetManagedWindow( this );
EDA_PANEINFO horiz;
horiz.HorizontalToolbarPane();
EDA_PANEINFO vert;
vert.VerticalToolbarPane();
EDA_PANEINFO mesg;
mesg.MessageToolbarPane();
// Create a wxAuiPaneInfo for the Layers Manager, not derived from the template.
// LAYER_WIDGET is floatable, but initially docked at far right
EDA_PANEINFO lyrs;
lyrs.LayersToolbarPane();
lyrs.MinSize( m_Layers->GetBestSize() ); // updated in ReFillLayerWidget
lyrs.BestSize( m_Layers->GetBestSize() );
lyrs.Caption( _( "Visibles" ) );
lyrs.TopDockable( false ).BottomDockable( false );
if( m_mainToolBar ) // The main horizontal toolbar
{
m_auimgr.AddPane( m_mainToolBar,
wxAuiPaneInfo( horiz ).Name( wxT( "m_mainToolBar" ) ).Top().Row( 0 ) );
}
if( m_auxiliaryToolBar ) // the auxiliary horizontal toolbar, that shows track and via sizes, zoom ...)
{
m_auimgr.AddPane( m_auxiliaryToolBar,
wxAuiPaneInfo( horiz ).Name( wxT( "m_auxiliaryToolBar" ) ).Top().Row( 1 ) );
}
if( m_microWaveToolBar ) // The auxiliary vertical right toolbar (currently microwave tools)
m_auimgr.AddPane( m_microWaveToolBar,
wxAuiPaneInfo( vert ).Name( wxT( "m_microWaveToolBar" ) ).
Right().Layer( 1 ).Position(1).Hide() );
if( m_drawToolBar ) // The main right vertical toolbar
m_auimgr.AddPane( m_drawToolBar,
wxAuiPaneInfo( vert ).Name( wxT( "m_VToolBar" ) ).Right().Layer( 2 ) );
// Add the layer manager ( most right side of pcbframe )
m_auimgr.AddPane( m_Layers, lyrs.Name( wxT( "m_LayersManagerToolBar" ) ).Right().Layer( 3 ) );
if( m_optionsToolBar ) // The left vertical toolbar (fast acces display options of Pcbnew)
{
m_auimgr.AddPane( m_optionsToolBar,
wxAuiPaneInfo( vert ).Name( wxT( "m_optionsToolBar" ) ).Left().Layer(1) );
m_auimgr.GetPane( wxT( "m_LayersManagerToolBar" ) ).Show( m_show_layer_manager_tools );
m_auimgr.GetPane( wxT( "m_microWaveToolBar" ) ).Show( m_show_microwave_tools );
}
if( m_canvas )
m_auimgr.AddPane( m_canvas,
wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane() );
if( GetGalCanvas() )
m_auimgr.AddPane( (wxWindow*) GetGalCanvas(),
wxAuiPaneInfo().Name( wxT( "DrawFrameGal" ) ).CentrePane().Hide() );
if( m_messagePanel )
m_auimgr.AddPane( m_messagePanel,
wxAuiPaneInfo( mesg ).Name( wxT( "MsgPanel" ) ).Bottom().Layer(10) );
ReFillLayerWidget(); // this is near end because contents establish size
m_Layers->ReFillRender(); // Update colors in Render after the config is read
syncLayerWidgetLayer();
m_auimgr.Update();
setupTools();
Zoom_Automatique( false );
EDA_DRAW_PANEL_GAL::GAL_TYPE canvasType = LoadCanvasTypeSetting();
if( canvasType != EDA_DRAW_PANEL_GAL::GAL_TYPE_NONE )
{
if( GetGalCanvas()->SwitchBackend( canvasType ) )
UseGalCanvas( true );
}
enableGALSpecificMenus();
}
FOOTPRINT_EDIT_FRAME::FOOTPRINT_EDIT_FRAME( KIWAY* aKiway, wxWindow* aParent,
EDA_DRAW_PANEL_GAL::GAL_TYPE aBackend ) :
PCB_BASE_EDIT_FRAME( aKiway, aParent, FRAME_PCB_MODULE_EDITOR, wxEmptyString,
wxDefaultPosition, wxDefaultSize,
KICAD_DEFAULT_DRAWFRAME_STYLE, GetFootprintEditorFrameName() )
{
m_showBorderAndTitleBlock = false; // true to show the frame references
m_showAxis = true; // true to show X and Y axis on screen
m_showGridAxis = true; // show the grid origin axis
m_hotkeysDescrList = g_Module_Editor_Hotkeys_Descr;
m_FrameSize = ConvertDialogToPixels( wxSize( 500, 350 ) ); // default in case of no prefs
m_canvasType = aBackend;
m_AboutTitle = "ModEdit";
// Give an icon
wxIcon icon;
icon.CopyFromBitmap( KiBitmap( icon_modedit_xpm ) );
SetIcon( icon );
// Create GAL canvas
if( aBackend == EDA_DRAW_PANEL_GAL::GAL_TYPE_UNKNOWN )
m_canvasType = LoadCanvasTypeSetting();
else
m_canvasType = aBackend;
PCB_DRAW_PANEL_GAL* drawPanel = new PCB_DRAW_PANEL_GAL( this, -1, wxPoint( 0, 0 ), m_FrameSize,
GetGalDisplayOptions(), m_canvasType );
SetGalCanvas( drawPanel );
SetBoard( new BOARD() );
// In modedit, the default net clearance is not known.
// (it depends on the actual board)
// So we do not show the default clearance, by setting it to 0
// The footprint or pad specific clearance will be shown
GetBoard()->GetDesignSettings().GetDefault()->SetClearance( 0 );
// Don't show the default board solder mask clearance in the footprint editor. Only the
// footprint or pad clearance setting should be shown if it is not 0.
GetBoard()->GetDesignSettings().m_SolderMaskMargin = 0;
// restore the last footprint from the project, if any
restoreLastFootprint();
// Ensure all layers and items are visible:
// In footprint editor, some layers have no meaning or
// cannot be used, but we show all of them, at least to be able
// to edit a bad layer
GetBoard()->SetVisibleAlls();
// However the "no net" mark on pads is useless, because there is
// no net in footprint editor: make it non visible
GetBoard()->SetElementVisibility( LAYER_NO_CONNECTS, false );
m_Layers = new PCB_LAYER_WIDGET( this, GetCanvas(), true );
// LoadSettings() *after* creating m_LayersManager, because LoadSettings()
// initialize parameters in m_LayersManager
LoadSettings( config() );
GetGalDisplayOptions().m_axesEnabled = true;
SetScreen( new PCB_SCREEN( GetPageSettings().GetSizeIU() ) );
GetScreen()->SetMaxUndoItems( m_UndoRedoCountMax );
GetScreen()->AddGrid( m_UserGridSize, EDA_UNITS_T::UNSCALED_UNITS, ID_POPUP_GRID_USER );
GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId );
// In modedit, set the default paper size to A4:
// this should be OK for all footprint to plot/print
SetPageSettings( PAGE_INFO( PAGE_INFO::A4 ) );
SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y );
initLibraryTree();
m_treePane = new FOOTPRINT_TREE_PANE( this );
// Create the manager and dispatcher & route draw panel events to the dispatcher
setupTools();
// ReCreateMenuBar(); // UseGalCanvas() will do this for us.
ReCreateHToolbar();
ReCreateVToolbar();
ReCreateOptToolbar();
m_Layers->ReFill();
m_Layers->ReFillRender();
GetScreen()->m_Active_Layer = F_SilkS;
m_Layers->SelectLayer( F_SilkS );
m_Layers->OnLayerSelected();
m_auimgr.SetManagedWindow( this );
m_auimgr.SetArtProvider( new EDA_DOCKART( this ) );
// Horizontal items; layers 4 - 6
m_auimgr.AddPane( m_mainToolBar, EDA_PANE().HToolbar().Name( "MainToolbar" ).Top().Layer(6) );
m_auimgr.AddPane( m_messagePanel, EDA_PANE().Messages().Name( "MsgPanel" ).Bottom().Layer(6) );
// Vertical items; layers 1 - 3
m_auimgr.AddPane( m_optionsToolBar, EDA_PANE().VToolbar().Name( "OptToolbar" ).Left().Layer(3) );
m_auimgr.AddPane( m_treePane, EDA_PANE().Palette().Name( "Footprints" ).Left().Layer(1)
.Caption( _( "Libraries" ) ).MinSize( 250, 400 )
.BestSize( m_defaultLibWidth, -1 ) );
m_auimgr.AddPane( m_drawToolBar, EDA_PANE().VToolbar().Name( "ToolsToolbar" ).Right().Layer(1) );
m_auimgr.AddPane( m_Layers, EDA_PANE().Palette().Name( "LayersManager" ).Right().Layer(3)
.Caption( _( "Layers Manager" ) ).PaneBorder( false )
.MinSize( 80, -1 ).BestSize( m_Layers->GetBestSize() ) );
m_auimgr.AddPane( m_canvas, EDA_PANE().Canvas().Name( "DrawFrame" ).Center() );
m_auimgr.AddPane( GetGalCanvas(), EDA_PANE().Canvas().Name( "DrawFrameGal" ).Center().Hide() );
GetGalCanvas()->GetGAL()->SetAxesEnabled( true );
// Set up viewport
KIGFX::VIEW* view = GetGalCanvas()->GetView();
view->SetScale( GetZoomLevelCoeff() / m_canvas->GetZoom() );
view->SetCenter( VECTOR2D( m_canvas->GetScreenCenterLogicalPosition() ) );
UseGalCanvas();
m_auimgr.Update();
updateTitle();
Raise(); // On some window managers, this is needed
Show( true );
Zoom_Automatique( false );
}
