int MFC_SetConfigParams(
MFCInstCtx *pMfcInst,
MFC_ARGS *args // Input arguments for IOCTL_MFC_SET_CONFIG
)
{
int ret;
unsigned int param_change_enable, param_change_val;
param_change_enable = 0;
switch (args->set_config.in_config_param) {
case MFC_SET_CONFIG_DEC_ROTATE:
#if (MFC_ROTATE_ENABLE == 1)
args->set_config.out_config_value_old[0]
= MFCInst_Set_PostRotate(pMfcInst, args->set_config.in_config_value[0]);
#else
LOG_MSG(LOG_ERROR, "MFC_SetConfigParams", "IOCTL_MFC_SET_CONFIG with MFC_SET_CONFIG_DEC_ROTATE is not supported.\r\n");
LOG_MSG(LOG_ERROR, "MFC_SetConfigParams", "Please check if MFC_ROTATE_ENABLE is defined as 1 in MfcConfig.h file.\r\n");
#endif
ret = MFCINST_RET_OK;
break;
case MFC_SET_CONFIG_DEC_OPTION:
ret = MFCINST_RET_OK;
break;
case MFC_SET_CONFIG_ENC_H263_PARAM:
args->set_config.out_config_value_old[0] = pMfcInst->h263_annex;
pMfcInst->h263_annex = args->set_config.in_config_value[0];
ret = MFCINST_RET_OK;
break;
case MFC_SET_CONFIG_ENC_SLICE_MODE:
if (pMfcInst->enc_num_slices) {
args->set_config.out_config_value_old[0] = 1;
args->set_config.out_config_value_old[1] = pMfcInst->enc_num_slices;
}
else {
args->set_config.out_config_value_old[0] = 0;
args->set_config.out_config_value_old[1] = 0;
}
if (args->set_config.in_config_value[0])
pMfcInst->enc_num_slices = args->set_config.in_config_value[1];
else
pMfcInst->enc_num_slices = 0;
ret = MFCINST_RET_OK;
break;
case MFC_SET_CONFIG_ENC_PARAM_CHANGE:
switch (args->set_config.in_config_value[0]) {
case ENC_PARAM_GOP_NUM:
param_change_enable = (1 << 0);
break;
case ENC_PARAM_INTRA_QP:
param_change_enable = (1 << 1);
break;
case ENC_PARAM_BITRATE:
param_change_enable = (1 << 2);
break;
case ENC_PARAM_F_RATE:
param_change_enable = (1 << 3);
break;
case ENC_PARAM_INTRA_REF:
param_change_enable = (1 << 4);
break;
case ENC_PARAM_SLICE_MODE:
param_change_enable = (1 << 5);
break;
default:
break;
}
param_change_val = args->set_config.in_config_value[1];
ret = MFCInst_EncParamChange(pMfcInst, param_change_enable, param_change_val);
break;
case MFC_SET_CONFIG_ENC_CUR_PIC_OPT:
switch (args->set_config.in_config_value[0]) {
case ENC_PIC_OPT_IDR:
pMfcInst->enc_pic_option ^= (args->set_config.in_config_value[1] << 1);
break;
case ENC_PIC_OPT_SKIP:
pMfcInst->enc_pic_option ^= (args->set_config.in_config_value[1] << 0);
break;
case ENC_PIC_OPT_RECOVERY:
pMfcInst->enc_pic_option ^= (args->set_config.in_config_value[1] << 24);
break;
default:
break;
}
ret = MFCINST_RET_OK;
break;
case MFC_SET_CACHE_CLEAN:
//printf("MFC_SET_CACHE_CLEAN : start(0x%08x) size(0x%x)\n", args->set_config.in_config_value[0], args->set_config.in_config_value[1]);
CleanCacheRange((PBYTE )args->set_config.in_config_value[0], (PBYTE )(args->set_config.in_config_value[0] + args->set_config.in_config_value[1] ) );
ret = MFCINST_RET_OK;
break;
case MFC_SET_CACHE_INVALIDATE:
//printf("MFC_SET_CACHE_INVALIDATE : start(0x%08x) size(0x%x)\n", args->set_config.in_config_value[0], args->set_config.in_config_value[1]);
InvalidateCacheRange((PBYTE )args->set_config.in_config_value[0], (PBYTE )(args->set_config.in_config_value[0] + args->set_config.in_config_value[1] ) );
ret = MFCINST_RET_OK;
break;
case MFC_SET_CACHE_CLEAN_INVALIDATE:
//printf("MFC_SET_CACHE_CLEAN_INVALIDATE : start(0x%08x) size(0x%x)\n", args->set_config.in_config_value[0], args->set_config.in_config_value[1]);
CleanInvalidateCacheRange((PBYTE )args->set_config.in_config_value[0], (PBYTE )(args->set_config.in_config_value[0] + args->set_config.in_config_value[1] ) );
ret = MFCINST_RET_OK;
break;
#if (defined(DIVX_ENABLE) && (DIVX_ENABLE == 1))
case MFC_SET_PADDING_SIZE:
// printf("MFC_SET_PADDING_SIZE : paddingsize(%d)\n", args->set_config.in_config_value[0]);
pMfcInst->paddingSize = args->set_config.in_config_value[0];
ret = MFCINST_RET_OK;
break;
#endif
default:
ret = -1;
}
// Output arguments for IOCTL_MFC_SET_CONFIG
args->set_config.ret_code = ret;
return MFCINST_RET_OK;
}
int MFC_SetConfigParams(
MFCInstCtx *pMfcInst,
MFC_ARGS *args // Input arguments for IOCTL_MFC_SET_CONFIG
)
{
int ret;
unsigned int param_change_enable = 0, param_change_val;
unsigned int start, end;
switch (args->set_config.in_config_param) {
case MFC_SET_CONFIG_MP4_DBK_ON: // yj: Mp4DbkOn bit is set '1'
args->set_config.out_config_value_old[0] = pMfcInst->isMp4DbkOn;
pMfcInst->isMp4DbkOn = args->set_config.in_config_value[0];
ret = MFCINST_RET_OK;
break;
case MFC_SET_CONFIG_DEC_ROTATE:
#if (MFC_ROTATE_ENABLE == 1)
args->set_config.out_config_value_old[0]
= MFCInst_Set_PostRotate(pMfcInst, args->set_config.in_config_value[0]);
ret = MFCINST_RET_OK;
#else
LOG_MSG(LOG_ERROR, "MFC_SetConfigParams", "IOCTL_MFC_SET_CONFIG with MFC_SET_CONFIG_DEC_ROTATE is not supported.\r\n");
LOG_MSG(LOG_ERROR, "MFC_SetConfigParams", "Please check if MFC_ROTATE_ENABLE is defined as 1 in MfcConfig.h file.\r\n");
ret = MFCINST_RET_OK;
#endif
break;
case MFC_SET_CONFIG_ENC_H263_PARAM:
args->set_config.out_config_value_old[0] = pMfcInst->h263_annex;
pMfcInst->h263_annex = args->set_config.in_config_value[0];
LOG_MSG(LOG_TRACE, "MFC_SetConfigParams", "parameter : 0x%X.\r\n", pMfcInst->h263_annex);
ret = MFCINST_RET_OK;
break;
case MFC_SET_CONFIG_ENC_SLICE_MODE:
if (pMfcInst->enc_num_slices) {
args->set_config.out_config_value_old[0] = 1;
args->set_config.out_config_value_old[1] = pMfcInst->enc_num_slices;
}
else {
args->set_config.out_config_value_old[0] = 0;
args->set_config.out_config_value_old[1] = 0;
}
if (args->set_config.in_config_value[0])
pMfcInst->enc_num_slices = args->set_config.in_config_value[1];
else
pMfcInst->enc_num_slices = 0;
ret = MFCINST_RET_OK;
break;
case MFC_SET_CONFIG_ENC_PARAM_CHANGE:
switch (args->set_config.in_config_value[0]) {
case ENC_PARAM_GOP_NUM:
param_change_enable = (1 << 0);
break;
case ENC_PARAM_INTRA_QP:
param_change_enable = (1 << 1);
break;
case ENC_PARAM_BITRATE:
param_change_enable = (1 << 2);
break;
case ENC_PARAM_F_RATE:
param_change_enable = (1 << 3);
break;
case ENC_PARAM_INTRA_REF:
param_change_enable = (1 << 4);
break;
case ENC_PARAM_SLICE_MODE:
param_change_enable = (1 << 5);
break;
default:
break;
}
param_change_val = args->set_config.in_config_value[1];
ret = MFCInst_EncParamChange(pMfcInst, param_change_enable, param_change_val);
break;
case MFC_SET_CONFIG_ENC_CUR_PIC_OPT:
switch (args->set_config.in_config_value[0]) {
case ENC_PIC_OPT_IDR:
pMfcInst->enc_pic_option ^= (args->set_config.in_config_value[1] << 1);
break;
case ENC_PIC_OPT_SKIP:
pMfcInst->enc_pic_option ^= (args->set_config.in_config_value[1] << 0);
break;
case ENC_PIC_OPT_RECOVERY:
pMfcInst->enc_pic_option ^= (args->set_config.in_config_value[1] << 24);
break;
default:
break;
}
ret = MFCINST_RET_OK;
break;
// RainAde : for setting RC parameters
case MFC_SET_CONFIG_ENC_SEQ_RC_PARA:
args->set_config.out_config_value_old[0] = pMfcInst->rcPara;
pMfcInst->rcPara = args->set_config.in_config_value[0];
LOG_MSG(LOG_TRACE, "MFC_SetConfigParams", "parameter : 0x%X.\r\n", pMfcInst->rcPara);
ret = MFCINST_RET_OK;
break;
// RainAde : for setting Picture Quantization Step on RC disable
case MFC_SET_CONFIG_ENC_PIC_QS:
args->set_config.out_config_value_old[0] = pMfcInst->pictureQs;
pMfcInst->pictureQs = args->set_config.in_config_value[0];
LOG_MSG(LOG_TRACE, "MFC_SetConfigParams", "parameter : 0x%X.\r\n", pMfcInst->pictureQs);
ret = MFCINST_RET_OK;
break;
case MFC_SET_CACHE_CLEAN:
// in_config_value[0] : start address in user layer
// in_config_value[1] : offset
// in_config_value[2] : start address of stream buffer in user layer
start = (unsigned int)pMfcInst->pStrmBuf + (args->set_config.in_config_value[0] - args->set_config.in_config_value[2]);
end = start + args->set_config.in_config_value[1];
// from 2.8.5
//dmac_clean_range((unsigned char *)start, (unsigned char *)end);
cpu_cache.flush_kern_all();
ret = MFCINST_RET_OK;
break;
case MFC_SET_CACHE_INVALIDATE:
// in_config_value[0] : start address in user layer
// in_config_value[1] : offset
// in_config_value[2] : start address of stream buffer in user layer
start = (unsigned int)pMfcInst->pStrmBuf + (args->set_config.in_config_value[0] - args->set_config.in_config_value[2]);
end = start + args->set_config.in_config_value[1];
// from 2.8.5
//dmac_flush_range((unsigned char *)start, (unsigned char *)end);
cpu_cache.flush_kern_all();
ret = MFCINST_RET_OK;
break;
case MFC_SET_CACHE_CLEAN_INVALIDATE:
// in_config_value[0] : start address in user layer
// in_config_value[1] : offset
// in_config_value[2] : start address of stream buffer in user layer
// from 2.8.5
//start = (unsigned int)pMfcInst->pStrmBuf + (args->set_config.in_config_value[0] - args->set_config.in_config_value[2]);
start = (unsigned int)pMfcInst->phyadrStrmBuf + (args->set_config.in_config_value[0] - args->set_config.in_config_value[2]);
end = start + args->set_config.in_config_value[1];
// from 2.8.5
//dmac_clean_range((unsigned char *)start, (unsigned char *)end);
//dmac_flush_range((unsigned char *)start, (unsigned char *)end);
cpu_cache.flush_kern_all();
ret = MFCINST_RET_OK;
break;
#if (defined(DIVX_ENABLE) && (DIVX_ENABLE == 1))
case MFC_SET_PADDING_SIZE:
printk("MFC_SET_PADDING_SIZE : paddingsize(%d)\n", args->set_config.in_config_value[0]);
pMfcInst->paddingSize = args->set_config.in_config_value[0];
ret = MFCINST_RET_OK;
break;
#endif
default:
ret = -1;
}
// Output arguments for IOCTL_MFC_SET_CONFIG
args->set_config.ret_code = ret;
return MFCINST_RET_OK;
}
