/////////////////////////////////////////////////////////////////////////////
// This hook is called after startup to initialize the application
/////////////////////////////////////////////////////////////////////////////
void APP_Init(void)
{
// create semaphores
xMIDIINSemaphore = xSemaphoreCreateRecursiveMutex();
xMIDIOUTSemaphore = xSemaphoreCreateRecursiveMutex();
// install SysEx callback
MIOS32_MIDI_SysExCallback_Init(APP_SYSEX_Parser);
// install MIDI Rx/Tx callback functions
MIOS32_MIDI_DirectRxCallback_Init(&NOTIFY_MIDI_Rx);
MIOS32_MIDI_DirectTxCallback_Init(&NOTIFY_MIDI_Tx);
// install timeout callback function
MIOS32_MIDI_TimeOutCallback_Init(&NOTIFY_MIDI_TimeOut);
// limit the number of DIN/DOUT SRs which will be scanned for faster scan rate
MIOS32_SRIO_ScanNumSet(2);
// init keyboard functions
KEYBOARD_Init(0);
// read EEPROM content
PRESETS_Init(0);
// init MIDI port/router handling
MIDI_PORT_Init(0);
MIDI_ROUTER_Init(0);
// init terminal
TERMINAL_Init(0);
// init MIDImon
MIDIMON_Init(0);
// start uIP task
UIP_TASK_Init(0);
// print welcome message on MIOS terminal
MIOS32_MIDI_SendDebugMessage("\n");
MIOS32_MIDI_SendDebugMessage("=================\n");
MIOS32_MIDI_SendDebugMessage("%s\n", MIOS32_LCD_BOOT_MSG_LINE1);
MIOS32_MIDI_SendDebugMessage("=================\n");
MIOS32_MIDI_SendDebugMessage("\n");
// speed up SPI transfer rate (was MIOS32_SPI_PRESCALER_128, initialized by MIOS32_SRIO_Init())
MIOS32_SPI_TransferModeInit(MIOS32_SRIO_SPI, MIOS32_SPI_MODE_CLK1_PHASE1, MIOS32_SPI_PRESCALER_128);
// prescaler 64 results into a transfer rate of 0.64 uS per bit
// when 2 SRs are transfered, we are able to scan the whole 16x8 matrix in 300 uS
// standard SRIO scan has been disabled in programming_models/traditional/main.c via MIOS32_DONT_SERVICE_SRIO_SCAN in mios32_config.h
// start the scan here - and retrigger it whenever it's finished
APP_SRIO_ServicePrepare();
MIOS32_SRIO_ScanStart(APP_SRIO_ServiceFinish);
// start tasks
xTaskCreate(TASK_Period_1mS, (signed portCHAR *)"1mS", configMINIMAL_STACK_SIZE, NULL, PRIORITY_TASK_PERIOD_1mS, NULL);
}
/////////////////////////////////////////////////////////////////////////////
// This hook is called after startup to initialize the application
/////////////////////////////////////////////////////////////////////////////
extern "C" void APP_Init(void)
{
// initialize all LEDs
MIOS32_BOARD_LED_Init(0xffffffff);
// initialize AOUT driver
AOUT_Init(0);
// initialize SID module
SID_Init(0);
// start tasks (differs between MIOS32 and MacOS)
TASKS_Init(0);
// install MIDI Rx/Tx callback functions
MIOS32_MIDI_DirectRxCallback_Init((void *)&NOTIFY_MIDI_Rx);
MIOS32_MIDI_DirectTxCallback_Init((void *)&NOTIFY_MIDI_Tx);
// install MIDI SysEx callback function
MIOS32_MIDI_SysExCallback_Init((void *)&NOTIFY_MIDI_SysEx);
// install timeout callback function
MIOS32_MIDI_TimeOutCallback_Init((void *)&NOTIFY_MIDI_TimeOut);
// init Stopwatch
APP_StopwatchInit();
// init MBNet
MBNET_Init(0);
MBNET_NodeIDSet(0x10);
// initialize MbSidEnvironment
sid_se_speed_factor = 2;
mbSidEnvironment.updateSpeedFactorSet(sid_se_speed_factor);
// start timer
// TODO: increase once performance has been evaluated
MIOS32_TIMER_Init(2, 2000 / sid_se_speed_factor, (void *)&SID_TIMER_SE_Update, MIOS32_IRQ_PRIO_MID);
}
/////////////////////////////////////////////////////////////////////////////
//! This hook is called after startup to initialize the application
/////////////////////////////////////////////////////////////////////////////
void APP_Init(void)
{
// initialize all LEDs
MIOS32_BOARD_LED_Init(0xffffffff);
// initialize stopwatch for measuring delays
MIOS32_STOPWATCH_Init(100);
// hardware will be enabled once configuration has been loaded from SD Card
// (resp. no SD Card is available)
hw_enabled = 0;
// only print error messages by default
debug_verbose_level = DEBUG_VERBOSE_LEVEL_ERROR;
// disable MSD by default (has to be enabled in SHIFT menu)
msd_state = MSD_DISABLED;
// hardware will be enabled once configuration has been loaded from SD Card
// (resp. no SD Card is available)
hw_enabled = 0;
// initialize all J10 pins as inputs with internal Pull-Up
int pin;
for(pin=0; pin<8; ++pin)
MIOS32_BOARD_J10_PinInit(pin, MIOS32_BOARD_PIN_MODE_INPUT_PU);
// initialize LCDs
MBNG_LCD_Init(0);
// initialize the AINSER module(s)
AINSER_Init(0);
// initialize the AOUT module(s)
AOUT_Init(0);
// create semaphores
xSDCardSemaphore = xSemaphoreCreateRecursiveMutex();
xMIDIINSemaphore = xSemaphoreCreateRecursiveMutex();
xMIDIOUTSemaphore = xSemaphoreCreateRecursiveMutex();
xLCDSemaphore = xSemaphoreCreateRecursiveMutex();
xJ16Semaphore = xSemaphoreCreateRecursiveMutex();
// install SysEx callback
MIOS32_MIDI_SysExCallback_Init(APP_SYSEX_Parser);
// install MIDI Rx/Tx callback functions
MIOS32_MIDI_DirectRxCallback_Init(&NOTIFY_MIDI_Rx);
MIOS32_MIDI_DirectTxCallback_Init(&NOTIFY_MIDI_Tx);
// install timeout callback function
MIOS32_MIDI_TimeOutCallback_Init(&NOTIFY_MIDI_TimeOut);
// initialize code modules
MIDI_PORT_Init(0);
MBNG_SYSEX_Init(0);
MIDI_ROUTER_Init(0);
MBNG_EVENT_Init(0);
MBNG_DIN_Init(0);
MBNG_DOUT_Init(0);
MBNG_ENC_Init(0);
MBNG_MF_Init(0);
MBNG_AIN_Init(0);
MBNG_AINSER_Init(0);
MBNG_CV_Init(0);
MBNG_KB_Init(0);
MBNG_MATRIX_Init(0);
UIP_TASK_Init(0);
SCS_Init(0);
SCS_CONFIG_Init(0);
TERMINAL_Init(0);
MIDIMON_Init(0);
MBNG_FILE_Init(0);
MBNG_SEQ_Init(0);
SEQ_MIDI_OUT_Init(0);
MBNG_PATCH_Init(0);
//KEYBOARD_Init(0);
// done in MBNG_PATCH_Init()
#if MIOS32_DONT_SERVICE_SRIO_SCAN
//MIOS32_SRIO_ScanNumSet(4);
// standard SRIO scan has been disabled in programming_models/traditional/main.c via MIOS32_DONT_SERVICE_SRIO_SCAN in mios32_config.h
// start the scan here - and retrigger it whenever it's finished
APP_SRIO_ServicePrepare();
MIOS32_SRIO_ScanStart(APP_SRIO_ServiceFinish);
#endif
}
/////////////////////////////////////////////////////////////////////////////
// This hook is called after startup to initialize the application
/////////////////////////////////////////////////////////////////////////////
void APP_Init(void)
{
// initialize all LEDs
MIOS32_BOARD_LED_Init(0xffffffff);
// disable DIN test mode by default
app_din_testmode = 0;
#ifdef MBSEQV4L
// MBSEQV4L: set default port to 0xc0: multiple outputs
MIOS32_MIDI_DefaultPortSet(0xc0);
#endif
// initialize hardware soft-config
SEQ_HWCFG_Init(0);
#ifndef MBSEQV4L
// initialize CLCDs
SEQ_LCD_Init(0);
#endif
// init BLMs
#ifndef MBSEQV4L
BLM_Init(0);
#else
BLM_CHEAPO_Init(0);
#endif
BLM_X_Init();
SEQ_TPD_Init(0);
// initialize CV
SEQ_CV_Init(0);
// initialize MIDI handlers
SEQ_MIDI_PORT_Init(0);
SEQ_MIDI_IN_Init(0);
SEQ_MIDI_SYSEX_Init(0);
SEQ_BLM_Init(0);
SEQ_MIDI_OUT_Init(0);
SEQ_MIDI_ROUTER_Init(0);
SEQ_TERMINAL_Init(0);
// init mixer page
SEQ_MIXER_Init(0);
// init sequencer core
SEQ_CORE_Init(0);
// init user interface
#ifndef MBSEQV4L
SEQ_LABEL_Init(0);
SEQ_CC_LABELS_Init(0);
#endif
SEQ_LED_Init(0);
SEQ_UI_Init(0);
// initial load of filesystem
SEQ_FILE_Init(0);
// start tasks (differs between MIOS32 and MacOS)
TASKS_Init(0);
// install MIDI Rx/Tx callback functions
MIOS32_MIDI_DirectRxCallback_Init(&NOTIFY_MIDI_Rx);
MIOS32_MIDI_DirectTxCallback_Init(&NOTIFY_MIDI_Tx);
// install SysEx callback
MIOS32_MIDI_SysExCallback_Init(APP_SYSEX_Parser);
// install timeout callback function
MIOS32_MIDI_TimeOutCallback_Init(&NOTIFY_MIDI_TimeOut);
}
