Esempio n. 1
0
void MMU_Init(void)
{
    int i,j;
    //========================== IMPORTANT NOTE =========================
    //The current stack and code area can't be re-mapped in this routine.
    //If you want memory map mapped freely, your own sophiscated MMU
    //initialization code is needed.
    //===================================================================

    MMU_DisableDCache();
    MMU_DisableICache();

    //If write-back is used,the DCache should be cleared.
    for(i=0;i<64;i++)
    	for(j=0;j<8;j++)
    	    MMU_CleanInvalidateDCacheIndex((i<<26)|(j<<5));
    MMU_InvalidateICache();
    
    #if 0
    //To complete MMU_Init() fast, Icache may be turned on here.
    MMU_EnableICache(); 
    #endif
    
    MMU_DisableMMU();
    MMU_InvalidateTLB();

    //MMU_SetMTT(int vaddrStart,int vaddrEnd,int paddrStart,int attr)
    //MMU_SetMTT(0x00000000,0x07f00000,0x00000000,RW_CNB);  //bank0
    MMU_SetMTT(0x00000000,0x03f00000,(int)__ENTRY,RW_CB);  //bank0
    MMU_SetMTT(0x04000000,0x07f00000,0,RW_NCNB);  			//bank0
    MMU_SetMTT(0x08000000,0x0ff00000,0x08000000,RW_CNB);  //bank1
    MMU_SetMTT(0x10000000,0x17f00000,0x10000000,RW_NCNB); //bank2
    MMU_SetMTT(0x18000000,0x1ff00000,0x18000000,RW_NCNB); //bank3
    //MMU_SetMTT(0x20000000,0x27f00000,0x20000000,RW_CB); //bank4
    MMU_SetMTT(0x20000000,0x27f00000,0x20000000,RW_CNB); //bank4 for STRATA Flash
    MMU_SetMTT(0x28000000,0x2ff00000,0x28000000,RW_NCNB); //bank5
    //30f00000->30100000, 31000000->30200000
    MMU_SetMTT(0x30000000,0x30100000,0x30000000,RW_CB);	  //bank6-1
    MMU_SetMTT(0x30200000,0x33e00000,0x30200000,RW_NCNB); //bank6-2
    //
    MMU_SetMTT(0x33f00000,0x33f00000,0x33f00000,RW_CB);   //bank6-3
    MMU_SetMTT(0x38000000,0x3ff00000,0x38000000,RW_NCNB); //bank7
    
    MMU_SetMTT(0x40000000,0x47f00000,0x40000000,RW_NCNB); //SFR
    MMU_SetMTT(0x48000000,0x5af00000,0x48000000,RW_NCNB); //SFR
    MMU_SetMTT(0x5b000000,0x5b000000,0x5b000000,RW_NCNB); //SFR
    MMU_SetMTT(0x5b100000,0xfff00000,0x5b100000,RW_FAULT);//not used

    
    MMU_SetTTBase(_MMUTT_STARTADDRESS);//设置一级映射描述符表的基地址
    MMU_SetDomain(0x55555550|DOMAIN1_ATTR|DOMAIN0_ATTR);//ARM处理器的16个域的访问权限
    	//DOMAIN1: no_access, DOMAIN0,2~15=client(AP is checked)
    MMU_SetProcessId(0x0);//设置进程标识符
    MMU_EnableAlignFault();//使能地址对齐检查功能
    	
    MMU_EnableMMU();
    MMU_EnableICache();
    MMU_EnableDCache(); //DCache should be turned on after MMU is turned on.
}    
Esempio n. 2
0
static void hal_mmu_init(void)
{
    acoral_32 i,j;
    /*========================== IMPORTANT NOTE =========================*/
    /*The current stack and code area can't be re-mapped in this routine.*/
    /*If you want memory map mapped freely, your own sophiscated MMU*/
    /*initialization code is needed.*/
    /*===================================================================*/

    MMU_DisableDCache();
    MMU_DisableICache();

    /*If write-back is used,the DCache should be cleared.*/
    for(i=0;i<64;i++)
    	for(j=0;j<8;j++)
    	    MMU_CleanInvalidateDCacheIndex((i<<26)|(j<<5));
    MMU_InvalidateICache();

    #if 0
    /*To complete MMU_Init() fast, Icache may be turned on here.*/
    MMU_EnableICache();
    #endif

    MMU_DisableMMU();
    MMU_InvalidateTLB();
    /*hal_mmu_setmtt(int vaddrStart,int vaddrEnd,int paddrStart,int attr)*/
    /*hal_mmu_setmtt(0x00000000,0x07f00000,0x00000000,RW_CNB);  /*bank0*/
    hal_mmu_setmtt(0x00000000,0x03f00000,__ENTRY,RW_CB);  /*bank0*/
    hal_mmu_setmtt(0x04000000,0x07f00000,0,RW_NCNB);  			/*bank0*/
    hal_mmu_setmtt(0x08000000,0x0ff00000,0x08000000,RW_CNB);  /*bank1*/
    hal_mmu_setmtt(0x10000000,0x17f00000,0x10000000,RW_NCNB); /*bank2*/
    hal_mmu_setmtt(0x18000000,0x1ff00000,0x18000000,RW_NCNB); /*bank3*/
    /*hal_mmu_setmtt(0x20000000,0x27f00000,0x20000000,RW_CB); /*bank4*/
    hal_mmu_setmtt(0x20000000,0x27f00000,0x20000000,RW_CNB); /*bank4 for STRATA Flash*/
    hal_mmu_setmtt(0x28000000,0x2ff00000,0x28000000,RW_NCNB); /*bank5*/
    /*30f00000->30100000, 31000000->30200000*/
    hal_mmu_setmtt(0x30000000,0x30100000,0x30000000,RW_NCNB);	  /*bank6-1*/
    hal_mmu_setmtt(0x30200000,0x33e00000,0x30200000,RW_NCNB); /*bank6-2*/
    /**/
    hal_mmu_setmtt(0x33f00000,0x33f00000,0x33f00000,RW_NCNB);   /*bank6-3*/
    hal_mmu_setmtt(0x38000000,0x3ff00000,0x38000000,RW_NCNB); /*bank7*/

    hal_mmu_setmtt(0x40000000,0x47f00000,0x40000000,RW_NCNB); /*SFR*/
    hal_mmu_setmtt(0x48000000,0x5af00000,0x48000000,RW_NCNB); /*SFR*/
    hal_mmu_setmtt(0x5b000000,0x5b000000,0x5b000000,RW_NCNB); /*SFR*/
    hal_mmu_setmtt(0x5b100000,0xfff00000,0x5b100000,RW_FAULT);/*not used*/


    MMU_SetTTBase(&MMU_base);
    MMU_SetDomain(0x55555550|DOMAIN1_ATTR|DOMAIN0_ATTR);
    	/*DOMAIN1: no_access, DOMAIN0,2~15=client(AP is checked)*/
    MMU_SetProcessId(0x0);
    MMU_EnableAlignFault();
    MMU_EnableMMU();
    MMU_EnableICache();
    MMU_EnableDCache(); /*DCache should be turned on after MMU is turned on.*/
}
Esempio n. 3
0
void MMU_Init(void)
{
	int i,j;
	MMU_DisableDCache();
	MMU_DisableICache();
	for(i=0;i<64;i++)
		for(j=0;j<8;j++)
		MMU_CleanInvalidateDCacheIndex((i<<26)|(j<<5));
		MMU_InvalidateICache();
		#if 0
		MMU_EnableICache();
		#endif
		MMU_DisableMMU();
		MMU_InvalidateTLB();
	MMU_SetMTT(0x00000000,0x03f00000,(int)__ENTRY,RW_CB);  //bank0
    MMU_SetMTT(0x04000000,0x07f00000,0,RW_NCNB);  			//bank0
    MMU_SetMTT(0x08000000,0x0ff00000,0x08000000,RW_CNB);  //bank1
    MMU_SetMTT(0x10000000,0x17f00000,0x10000000,RW_NCNB); //bank2
    MMU_SetMTT(0x18000000,0x1ff00000,0x18000000,RW_NCNB); //bank3
    //MMU_SetMTT(0x20000000,0x27f00000,0x20000000,RW_CB); //bank4
    MMU_SetMTT(0x20000000,0x27f00000,0x20000000,RW_CNB); //bank4 for STRATA Flash
    MMU_SetMTT(0x28000000,0x2ff00000,0x28000000,RW_NCNB); //bank5
    //30f00000->30100000, 31000000->30200000
    MMU_SetMTT(0x30000000,0x30100000,0x30000000,RW_CB);	  //bank6-1
    MMU_SetMTT(0x30200000,0x33e00000,0x30200000,RW_NCNB); //bank6-2
    //
    MMU_SetMTT(0x33f00000,0x33f00000,0x33f00000,RW_CB);   //bank6-3
    MMU_SetMTT(0x38000000,0x3ff00000,0x38000000,RW_NCNB); //bank7
    
    MMU_SetMTT(0x40000000,0x47f00000,0x40000000,RW_NCNB); //SFR
    MMU_SetMTT(0x48000000,0x5af00000,0x48000000,RW_NCNB); //SFR
    MMU_SetMTT(0x5b000000,0x5b000000,0x5b000000,RW_NCNB); //SFR
    MMU_SetMTT(0x5b100000,0xfff00000,0x5b100000,RW_FAULT);//not used

    
    MMU_SetTTBase(_MMUTT_STARTADDRESS);
    MMU_SetDomain(0x55555550|DOMAIN1_ATTR|DOMAIN0_ATTR); 
    	//DOMAIN1: no_access, DOMAIN0,2~15=client(AP is checked)
    MMU_SetProcessId(0x0);
    MMU_EnableAlignFault();
    	
    MMU_EnableMMU();
    MMU_EnableICache();
    MMU_EnableDCache(); //
}
Esempio n. 4
0
// attr=RW_CB,RW_CNB,RW_NCNB,RW_FAULT
void ChangeRomCacheStatus(int attr)
{
    int i,j;
    MMU_DisableDCache();
    MMU_DisableICache();
    //If write-back is used,the DCache should be cleared.
    for(i=0;i<64;i++)
    	for(j=0;j<8;j++)
    	    MMU_CleanInvalidateDCacheIndex((i<<26)|(j<<5));
    MMU_InvalidateICache();
    MMU_DisableMMU();
    MMU_InvalidateTLB();
    MMU_SetMTT(0x00000000,0x07f00000,0x00000000,attr);	//bank0
    MMU_SetMTT(0x08000000,0x0ff00000,0x08000000,attr);	//bank1
    MMU_EnableMMU();
    MMU_EnableICache();
    MMU_EnableDCache();
}    
Esempio n. 5
0
void MMU_Init(void)
{
    int i,j;
    unsigned long * pTT;
    //========================== IMPORTANT NOTE =========================
    //The current stack and code area can't be re-mapped in this routine.
    //If you want memory map mapped freely, your own sophiscated MMU
    //initialization code is needed.
    //===================================================================

	Uart_Printf("MMU_Init test 1\n");
    MMU_DisableDCache();
    MMU_DisableICache();

	Uart_Printf("MMU_Init test 2\n");
    //If write-back is used,the DCache should be cleared.
    for(i=0;i<64;i++)
    	for(j=0;j<8;j++)
    	    MMU_CleanInvalidateDCacheIndex((i<<26)|(j<<5));
    MMU_InvalidateICache();
    
    #if 0
    //To complete MMU_Init() fast, Icache may be turned on here.
    MMU_EnableICache(); 
    #endif
    
    Uart_Printf("MMU_Init test 3\n");
    MMU_DisableMMU();
    Uart_Printf("MMU_Init test 4\n");
    MMU_InvalidateTLB();
 
 	Uart_Printf("MMU_Init test 5\n");
    MMU_SetMTT(0x00000000,0xffffffff,0,RW_FAULT);  //bank0
    	
           
    MMU_SetMTT(0x00000000,0x08000000,(int)__ENTRY,RW_NCNB);  //bank0
    MMU_SetMTT(0x50000000,0x58000000,0x50000000,RW_NCNB);  //bank0
    
    
    MMU_SetMTT(0x70000000,0x70400000,0x70000000,RW_NCNB);  //bank0
    MMU_SetMTT(0x71000000,0x71400000,0x71000000,RW_NCNB);  //bank0
    
    MMU_SetMTT(0x72000000,0x73200000,0x72000000,RW_NCNB);  //bank0
    MMU_SetMTT(0x74000000,0x74500000,0x74000000,RW_NCNB);  //bank0
    MMU_SetMTT(0x75000000,0x75400000,0x75000000,RW_NCNB);  //bank0
    MMU_SetMTT(0x76000000,0x76400000,0x76000000,RW_NCNB);  //bank0
    MMU_SetMTT(0x77000000,0x77300000,0x77000000,RW_NCNB);  //bank0
    MMU_SetMTT(0x78000000,0x78c00000,0x78000000,RW_NCNB);  //bank0
    MMU_SetMTT(0x7c000000,0x7c500000,0x7c000000,RW_NCNB);  //bank0
    MMU_SetMTT(0x7d000000,0x7e100000,0x7d000000,RW_NCNB);  //bank0
    
    MMU_SetMTT(0x7f000000,0x7f100000,0x7f000000,RW_NCNB);  //bank0
    

    MMU_SetMTT(0xc0000000,0xc8000000,0x50000000,RW_NCNB);
    
    
    
    //[email protected] test
    //MMU_SetMTT(0x60000000,0x68000000,0x50000000,RW_NCNB);  //bank0
    
    
    
    MMU_SetTTBase(_MMUTT_STARTADDRESS);
    MMU_SetDomain(0x55555550|DOMAIN1_ATTR|DOMAIN0_ATTR); 
    	//DOMAIN1: no_access, DOMAIN0,2~15=client(AP is checked)
   	MMU_SetProcessId(0x0);
    MMU_EnableAlignFault();
    	
    MMU_EnableMMU();
    
    
    
    MMU_EnableICache();
    MMU_EnableDCache(); //DCache should be turned on after MMU is turned on.
}    
Esempio n. 6
0
void MMU_Init(void)
{
    int i,j;
    //========================== IMPORTANT NOTE =========================
    //The current stack and code area can't be re-mapped in this routine.
    //If you want memory map mapped freely, your own sophiscated MMU
    //initialization code is needed.
    //===================================================================

    MMU_DisableDCache();
    MMU_DisableICache();

    //If write-back is used,the DCache should be cleared.
    for(i=0;i<64;i++)
        for(j=0;j<8;j++)
            MMU_CleanInvalidateDCacheIndex((i<<26)|(j<<5));
    MMU_InvalidateICache();

    #if 0
    //To complete MMU_Init() fast, Icache may be turned on here.
    MMU_EnableICache();
    #endif

    MMU_DisableMMU();
    MMU_InvalidateTLB();

    //MMU_SetMTT(int wVSAddr,int wVEAddr,int wPSAddr,int wAttrib)

#ifdef MY_SPL_BOARD

    MMU_SetMTT(0x00000000,0x07f00000,0x00000000,RW_CNB);  //bank0
    MMU_SetMTT(0x08000000,0x081FFFFF,0x08000000,RW_CNB);  //bank1
    MMU_SetMTT(0x10000000,0x10400000,0x10000000,RW_CNB); //bank2
    MMU_SetMTT(0x18000000,0x19f00000,0x18000000,RW_NCNB); //bank3

    MMU_SetMTT(0x40000000,0x40000000,0x40000000,RW_NCNB); //SFR
    MMU_SetMTT(0x48000000,0x5af00000,0x48000000,RW_NCNB); //SFR
#else

    MMU_SetMTT(0x00000000,0x07f00000,0x00000000,RW_CNB);  //bank0
    MMU_SetMTT(0x08000000,0x0ff00000,0x08000000,RW_CNB);  //bank1
    MMU_SetMTT(0x10000000,0x17f00000,0x10000000,RW_NCNB); //bank2
    MMU_SetMTT(0x18000000,0x1ff00000,0x18000000,RW_NCNB); //bank3
    MMU_SetMTT(0x20000000,0x27f00000,0x20000000,RW_NCNB); //bank4
    MMU_SetMTT(0x28000000,0x2ff00000,0x28000000,RW_NCNB); //bank5
    MMU_SetMTT(0x30000000,0x30f00000,0x30000000,RW_CB);      //bank6-1
    MMU_SetMTT(0x31000000,0x33e00000,0x31000000,RW_NCNB); //bank6-2
    MMU_SetMTT(0x33f00000,0x33f00000,0x33f00000,RW_CB);   //bank6-3
    MMU_SetMTT(0x38000000,0x3ff00000,0x38000000,RW_NCNB); //bank7

    MMU_SetMTT(0x40000000,0x5af00000,0x40000000,RW_NCNB);//SFR+StepSram
    MMU_SetMTT(0x5b000000,0xfff00000,0x5b000000,RW_FAULT);//not used

#endif


    MMU_SetTTBase(MMUTT_SADDR);
    MMU_SetDomain(0x55555550|DOMAIN1_ATTR|DOMAIN0_ATTR);
    //DOMAIN1: no_access, DOMAIN0,2~15=client(AP is checked)
    MMU_SetProcessId(0x0);
    MMU_EnableAlignFault();

    MMU_EnableMMU();
    MMU_EnableICache();
    MMU_EnableDCache(); //DCache should be turned on after MMU is turned on.
}