void MMU_Init(void)
{
int i,j;
//========================== IMPORTANT NOTE =========================
//The current stack and code area can't be re-mapped in this routine.
//If you want memory map mapped freely, your own sophiscated MMU
//initialization code is needed.
//===================================================================
MMU_DisableDCache();
MMU_DisableICache();
//If write-back is used,the DCache should be cleared.
for(i=0;i<64;i++)
for(j=0;j<8;j++)
MMU_CleanInvalidateDCacheIndex((i<<26)|(j<<5));
MMU_InvalidateICache();
#if 0
//To complete MMU_Init() fast, Icache may be turned on here.
MMU_EnableICache();
#endif
MMU_DisableMMU();
MMU_InvalidateTLB();
//MMU_SetMTT(int vaddrStart,int vaddrEnd,int paddrStart,int attr)
//MMU_SetMTT(0x00000000,0x07f00000,0x00000000,RW_CNB); //bank0
MMU_SetMTT(0x00000000,0x03f00000,(int)__ENTRY,RW_CB); //bank0
MMU_SetMTT(0x04000000,0x07f00000,0,RW_NCNB); //bank0
MMU_SetMTT(0x08000000,0x0ff00000,0x08000000,RW_CNB); //bank1
MMU_SetMTT(0x10000000,0x17f00000,0x10000000,RW_NCNB); //bank2
MMU_SetMTT(0x18000000,0x1ff00000,0x18000000,RW_NCNB); //bank3
//MMU_SetMTT(0x20000000,0x27f00000,0x20000000,RW_CB); //bank4
MMU_SetMTT(0x20000000,0x27f00000,0x20000000,RW_CNB); //bank4 for STRATA Flash
MMU_SetMTT(0x28000000,0x2ff00000,0x28000000,RW_NCNB); //bank5
//30f00000->30100000, 31000000->30200000
MMU_SetMTT(0x30000000,0x30100000,0x30000000,RW_CB); //bank6-1
MMU_SetMTT(0x30200000,0x33e00000,0x30200000,RW_NCNB); //bank6-2
//
MMU_SetMTT(0x33f00000,0x33f00000,0x33f00000,RW_CB); //bank6-3
MMU_SetMTT(0x38000000,0x3ff00000,0x38000000,RW_NCNB); //bank7
MMU_SetMTT(0x40000000,0x47f00000,0x40000000,RW_NCNB); //SFR
MMU_SetMTT(0x48000000,0x5af00000,0x48000000,RW_NCNB); //SFR
MMU_SetMTT(0x5b000000,0x5b000000,0x5b000000,RW_NCNB); //SFR
MMU_SetMTT(0x5b100000,0xfff00000,0x5b100000,RW_FAULT);//not used
MMU_SetTTBase(_MMUTT_STARTADDRESS);//设置一级映射描述符表的基地址
MMU_SetDomain(0x55555550|DOMAIN1_ATTR|DOMAIN0_ATTR);//ARM处理器的16个域的访问权限
//DOMAIN1: no_access, DOMAIN0,2~15=client(AP is checked)
MMU_SetProcessId(0x0);//设置进程标识符
MMU_EnableAlignFault();//使能地址对齐检查功能
MMU_EnableMMU();
MMU_EnableICache();
MMU_EnableDCache(); //DCache should be turned on after MMU is turned on.
}
static void hal_mmu_init(void)
{
acoral_32 i,j;
/*========================== IMPORTANT NOTE =========================*/
/*The current stack and code area can't be re-mapped in this routine.*/
/*If you want memory map mapped freely, your own sophiscated MMU*/
/*initialization code is needed.*/
/*===================================================================*/
MMU_DisableDCache();
MMU_DisableICache();
/*If write-back is used,the DCache should be cleared.*/
for(i=0;i<64;i++)
for(j=0;j<8;j++)
MMU_CleanInvalidateDCacheIndex((i<<26)|(j<<5));
MMU_InvalidateICache();
#if 0
/*To complete MMU_Init() fast, Icache may be turned on here.*/
MMU_EnableICache();
#endif
MMU_DisableMMU();
MMU_InvalidateTLB();
/*hal_mmu_setmtt(int vaddrStart,int vaddrEnd,int paddrStart,int attr)*/
/*hal_mmu_setmtt(0x00000000,0x07f00000,0x00000000,RW_CNB); /*bank0*/
hal_mmu_setmtt(0x00000000,0x03f00000,__ENTRY,RW_CB); /*bank0*/
hal_mmu_setmtt(0x04000000,0x07f00000,0,RW_NCNB); /*bank0*/
hal_mmu_setmtt(0x08000000,0x0ff00000,0x08000000,RW_CNB); /*bank1*/
hal_mmu_setmtt(0x10000000,0x17f00000,0x10000000,RW_NCNB); /*bank2*/
hal_mmu_setmtt(0x18000000,0x1ff00000,0x18000000,RW_NCNB); /*bank3*/
/*hal_mmu_setmtt(0x20000000,0x27f00000,0x20000000,RW_CB); /*bank4*/
hal_mmu_setmtt(0x20000000,0x27f00000,0x20000000,RW_CNB); /*bank4 for STRATA Flash*/
hal_mmu_setmtt(0x28000000,0x2ff00000,0x28000000,RW_NCNB); /*bank5*/
/*30f00000->30100000, 31000000->30200000*/
hal_mmu_setmtt(0x30000000,0x30100000,0x30000000,RW_NCNB); /*bank6-1*/
hal_mmu_setmtt(0x30200000,0x33e00000,0x30200000,RW_NCNB); /*bank6-2*/
/**/
hal_mmu_setmtt(0x33f00000,0x33f00000,0x33f00000,RW_NCNB); /*bank6-3*/
hal_mmu_setmtt(0x38000000,0x3ff00000,0x38000000,RW_NCNB); /*bank7*/
hal_mmu_setmtt(0x40000000,0x47f00000,0x40000000,RW_NCNB); /*SFR*/
hal_mmu_setmtt(0x48000000,0x5af00000,0x48000000,RW_NCNB); /*SFR*/
hal_mmu_setmtt(0x5b000000,0x5b000000,0x5b000000,RW_NCNB); /*SFR*/
hal_mmu_setmtt(0x5b100000,0xfff00000,0x5b100000,RW_FAULT);/*not used*/
MMU_SetTTBase(&MMU_base);
MMU_SetDomain(0x55555550|DOMAIN1_ATTR|DOMAIN0_ATTR);
/*DOMAIN1: no_access, DOMAIN0,2~15=client(AP is checked)*/
MMU_SetProcessId(0x0);
MMU_EnableAlignFault();
MMU_EnableMMU();
MMU_EnableICache();
MMU_EnableDCache(); /*DCache should be turned on after MMU is turned on.*/
}
void MMU_Init(void)
{
int i,j;
MMU_DisableDCache();
MMU_DisableICache();
for(i=0;i<64;i++)
for(j=0;j<8;j++)
MMU_CleanInvalidateDCacheIndex((i<<26)|(j<<5));
MMU_InvalidateICache();
#if 0
MMU_EnableICache();
#endif
MMU_DisableMMU();
MMU_InvalidateTLB();
MMU_SetMTT(0x00000000,0x03f00000,(int)__ENTRY,RW_CB); //bank0
MMU_SetMTT(0x04000000,0x07f00000,0,RW_NCNB); //bank0
MMU_SetMTT(0x08000000,0x0ff00000,0x08000000,RW_CNB); //bank1
MMU_SetMTT(0x10000000,0x17f00000,0x10000000,RW_NCNB); //bank2
MMU_SetMTT(0x18000000,0x1ff00000,0x18000000,RW_NCNB); //bank3
//MMU_SetMTT(0x20000000,0x27f00000,0x20000000,RW_CB); //bank4
MMU_SetMTT(0x20000000,0x27f00000,0x20000000,RW_CNB); //bank4 for STRATA Flash
MMU_SetMTT(0x28000000,0x2ff00000,0x28000000,RW_NCNB); //bank5
//30f00000->30100000, 31000000->30200000
MMU_SetMTT(0x30000000,0x30100000,0x30000000,RW_CB); //bank6-1
MMU_SetMTT(0x30200000,0x33e00000,0x30200000,RW_NCNB); //bank6-2
//
MMU_SetMTT(0x33f00000,0x33f00000,0x33f00000,RW_CB); //bank6-3
MMU_SetMTT(0x38000000,0x3ff00000,0x38000000,RW_NCNB); //bank7
MMU_SetMTT(0x40000000,0x47f00000,0x40000000,RW_NCNB); //SFR
MMU_SetMTT(0x48000000,0x5af00000,0x48000000,RW_NCNB); //SFR
MMU_SetMTT(0x5b000000,0x5b000000,0x5b000000,RW_NCNB); //SFR
MMU_SetMTT(0x5b100000,0xfff00000,0x5b100000,RW_FAULT);//not used
MMU_SetTTBase(_MMUTT_STARTADDRESS);
MMU_SetDomain(0x55555550|DOMAIN1_ATTR|DOMAIN0_ATTR);
//DOMAIN1: no_access, DOMAIN0,2~15=client(AP is checked)
MMU_SetProcessId(0x0);
MMU_EnableAlignFault();
MMU_EnableMMU();
MMU_EnableICache();
MMU_EnableDCache(); //
}
// attr=RW_CB,RW_CNB,RW_NCNB,RW_FAULT
void ChangeRomCacheStatus(int attr)
{
int i,j;
MMU_DisableDCache();
MMU_DisableICache();
//If write-back is used,the DCache should be cleared.
for(i=0;i<64;i++)
for(j=0;j<8;j++)
MMU_CleanInvalidateDCacheIndex((i<<26)|(j<<5));
MMU_InvalidateICache();
MMU_DisableMMU();
MMU_InvalidateTLB();
MMU_SetMTT(0x00000000,0x07f00000,0x00000000,attr); //bank0
MMU_SetMTT(0x08000000,0x0ff00000,0x08000000,attr); //bank1
MMU_EnableMMU();
MMU_EnableICache();
MMU_EnableDCache();
}
void MMU_Init(void)
{
int i,j;
unsigned long * pTT;
//========================== IMPORTANT NOTE =========================
//The current stack and code area can't be re-mapped in this routine.
//If you want memory map mapped freely, your own sophiscated MMU
//initialization code is needed.
//===================================================================
Uart_Printf("MMU_Init test 1\n");
MMU_DisableDCache();
MMU_DisableICache();
Uart_Printf("MMU_Init test 2\n");
//If write-back is used,the DCache should be cleared.
for(i=0;i<64;i++)
for(j=0;j<8;j++)
MMU_CleanInvalidateDCacheIndex((i<<26)|(j<<5));
MMU_InvalidateICache();
#if 0
//To complete MMU_Init() fast, Icache may be turned on here.
MMU_EnableICache();
#endif
Uart_Printf("MMU_Init test 3\n");
MMU_DisableMMU();
Uart_Printf("MMU_Init test 4\n");
MMU_InvalidateTLB();
Uart_Printf("MMU_Init test 5\n");
MMU_SetMTT(0x00000000,0xffffffff,0,RW_FAULT); //bank0
MMU_SetMTT(0x00000000,0x08000000,(int)__ENTRY,RW_NCNB); //bank0
MMU_SetMTT(0x50000000,0x58000000,0x50000000,RW_NCNB); //bank0
MMU_SetMTT(0x70000000,0x70400000,0x70000000,RW_NCNB); //bank0
MMU_SetMTT(0x71000000,0x71400000,0x71000000,RW_NCNB); //bank0
MMU_SetMTT(0x72000000,0x73200000,0x72000000,RW_NCNB); //bank0
MMU_SetMTT(0x74000000,0x74500000,0x74000000,RW_NCNB); //bank0
MMU_SetMTT(0x75000000,0x75400000,0x75000000,RW_NCNB); //bank0
MMU_SetMTT(0x76000000,0x76400000,0x76000000,RW_NCNB); //bank0
MMU_SetMTT(0x77000000,0x77300000,0x77000000,RW_NCNB); //bank0
MMU_SetMTT(0x78000000,0x78c00000,0x78000000,RW_NCNB); //bank0
MMU_SetMTT(0x7c000000,0x7c500000,0x7c000000,RW_NCNB); //bank0
MMU_SetMTT(0x7d000000,0x7e100000,0x7d000000,RW_NCNB); //bank0
MMU_SetMTT(0x7f000000,0x7f100000,0x7f000000,RW_NCNB); //bank0
MMU_SetMTT(0xc0000000,0xc8000000,0x50000000,RW_NCNB);
//[email protected] test
//MMU_SetMTT(0x60000000,0x68000000,0x50000000,RW_NCNB); //bank0
MMU_SetTTBase(_MMUTT_STARTADDRESS);
MMU_SetDomain(0x55555550|DOMAIN1_ATTR|DOMAIN0_ATTR);
//DOMAIN1: no_access, DOMAIN0,2~15=client(AP is checked)
MMU_SetProcessId(0x0);
MMU_EnableAlignFault();
MMU_EnableMMU();
MMU_EnableICache();
MMU_EnableDCache(); //DCache should be turned on after MMU is turned on.
}
void MMU_Init(void)
{
int i,j;
//========================== IMPORTANT NOTE =========================
//The current stack and code area can't be re-mapped in this routine.
//If you want memory map mapped freely, your own sophiscated MMU
//initialization code is needed.
//===================================================================
MMU_DisableDCache();
MMU_DisableICache();
//If write-back is used,the DCache should be cleared.
for(i=0;i<64;i++)
for(j=0;j<8;j++)
MMU_CleanInvalidateDCacheIndex((i<<26)|(j<<5));
MMU_InvalidateICache();
#if 0
//To complete MMU_Init() fast, Icache may be turned on here.
MMU_EnableICache();
#endif
MMU_DisableMMU();
MMU_InvalidateTLB();
//MMU_SetMTT(int wVSAddr,int wVEAddr,int wPSAddr,int wAttrib)
#ifdef MY_SPL_BOARD
MMU_SetMTT(0x00000000,0x07f00000,0x00000000,RW_CNB); //bank0
MMU_SetMTT(0x08000000,0x081FFFFF,0x08000000,RW_CNB); //bank1
MMU_SetMTT(0x10000000,0x10400000,0x10000000,RW_CNB); //bank2
MMU_SetMTT(0x18000000,0x19f00000,0x18000000,RW_NCNB); //bank3
MMU_SetMTT(0x40000000,0x40000000,0x40000000,RW_NCNB); //SFR
MMU_SetMTT(0x48000000,0x5af00000,0x48000000,RW_NCNB); //SFR
#else
MMU_SetMTT(0x00000000,0x07f00000,0x00000000,RW_CNB); //bank0
MMU_SetMTT(0x08000000,0x0ff00000,0x08000000,RW_CNB); //bank1
MMU_SetMTT(0x10000000,0x17f00000,0x10000000,RW_NCNB); //bank2
MMU_SetMTT(0x18000000,0x1ff00000,0x18000000,RW_NCNB); //bank3
MMU_SetMTT(0x20000000,0x27f00000,0x20000000,RW_NCNB); //bank4
MMU_SetMTT(0x28000000,0x2ff00000,0x28000000,RW_NCNB); //bank5
MMU_SetMTT(0x30000000,0x30f00000,0x30000000,RW_CB); //bank6-1
MMU_SetMTT(0x31000000,0x33e00000,0x31000000,RW_NCNB); //bank6-2
MMU_SetMTT(0x33f00000,0x33f00000,0x33f00000,RW_CB); //bank6-3
MMU_SetMTT(0x38000000,0x3ff00000,0x38000000,RW_NCNB); //bank7
MMU_SetMTT(0x40000000,0x5af00000,0x40000000,RW_NCNB);//SFR+StepSram
MMU_SetMTT(0x5b000000,0xfff00000,0x5b000000,RW_FAULT);//not used
#endif
MMU_SetTTBase(MMUTT_SADDR);
MMU_SetDomain(0x55555550|DOMAIN1_ATTR|DOMAIN0_ATTR);
//DOMAIN1: no_access, DOMAIN0,2~15=client(AP is checked)
MMU_SetProcessId(0x0);
MMU_EnableAlignFault();
MMU_EnableMMU();
MMU_EnableICache();
MMU_EnableDCache(); //DCache should be turned on after MMU is turned on.
}