/*
* This function transfers received packets from card to driver, performing
* aggregation if required.
*
* For data received on control port, or if aggregation is disabled, the
* received buffers are uploaded as separate packets. However, if aggregation
* is enabled and required, the buffers are copied onto an aggregation buffer,
* provided there is space left, processed and finally uploaded.
*/
static int mwifiex_sdio_card_to_host_mp_aggr(struct mwifiex_adapter *adapter,
struct sk_buff *skb, u8 port)
{
struct sdio_mmc_card *card = adapter->card;
s32 f_do_rx_aggr = 0;
s32 f_do_rx_cur = 0;
s32 f_aggr_cur = 0;
struct sk_buff *skb_deaggr;
u32 pind;
u32 pkt_len, pkt_type = 0;
u8 *curr_ptr;
u32 rx_len = skb->len;
if (port == CTRL_PORT) {
/* Read the command Resp without aggr */
dev_dbg(adapter->dev, "info: %s: no aggregation for cmd "
"response\n", __func__);
f_do_rx_cur = 1;
goto rx_curr_single;
}
if (!card->mpa_rx.enabled) {
dev_dbg(adapter->dev, "info: %s: rx aggregation disabled\n",
__func__);
f_do_rx_cur = 1;
goto rx_curr_single;
}
if (card->mp_rd_bitmap & (~((u16) CTRL_PORT_MASK))) {
/* Some more data RX pending */
dev_dbg(adapter->dev, "info: %s: not last packet\n", __func__);
if (MP_RX_AGGR_IN_PROGRESS(card)) {
if (MP_RX_AGGR_BUF_HAS_ROOM(card, skb->len)) {
f_aggr_cur = 1;
} else {
/* No room in Aggr buf, do rx aggr now */
f_do_rx_aggr = 1;
f_do_rx_cur = 1;
}
} else {
/* Rx aggr not in progress */
f_aggr_cur = 1;
}
} else {
/* No more data RX pending */
dev_dbg(adapter->dev, "info: %s: last packet\n", __func__);
if (MP_RX_AGGR_IN_PROGRESS(card)) {
f_do_rx_aggr = 1;
if (MP_RX_AGGR_BUF_HAS_ROOM(card, skb->len))
f_aggr_cur = 1;
else
/* No room in Aggr buf, do rx aggr now */
f_do_rx_cur = 1;
} else {
f_do_rx_cur = 1;
}
}
if (f_aggr_cur) {
dev_dbg(adapter->dev, "info: current packet aggregation\n");
/* Curr pkt can be aggregated */
MP_RX_AGGR_SETUP(card, skb, port);
if (MP_RX_AGGR_PKT_LIMIT_REACHED(card) ||
MP_RX_AGGR_PORT_LIMIT_REACHED(card)) {
dev_dbg(adapter->dev, "info: %s: aggregated packet "
"limit reached\n", __func__);
/* No more pkts allowed in Aggr buf, rx it */
f_do_rx_aggr = 1;
}
}
if (f_do_rx_aggr) {
/* do aggr RX now */
dev_dbg(adapter->dev, "info: do_rx_aggr: num of packets: %d\n",
card->mpa_rx.pkt_cnt);
if (mwifiex_read_data_sync(adapter, card->mpa_rx.buf,
card->mpa_rx.buf_len,
(adapter->ioport | 0x1000 |
(card->mpa_rx.ports << 4)) +
card->mpa_rx.start_port, 1))
return -1;
curr_ptr = card->mpa_rx.buf;
for (pind = 0; pind < card->mpa_rx.pkt_cnt; pind++) {
/* get curr PKT len & type */
pkt_len = *(u16 *) &curr_ptr[0];
pkt_type = *(u16 *) &curr_ptr[2];
/* copy pkt to deaggr buf */
skb_deaggr = card->mpa_rx.skb_arr[pind];
if ((pkt_type == MWIFIEX_TYPE_DATA) && (pkt_len <=
card->mpa_rx.len_arr[pind])) {
memcpy(skb_deaggr->data, curr_ptr, pkt_len);
skb_trim(skb_deaggr, pkt_len);
/* Process de-aggr packet */
mwifiex_decode_rx_packet(adapter, skb_deaggr,
pkt_type);
} else {
dev_err(adapter->dev, "wrong aggr pkt:"
" type=%d len=%d max_len=%d\n",
pkt_type, pkt_len,
card->mpa_rx.len_arr[pind]);
dev_kfree_skb_any(skb_deaggr);
}
curr_ptr += card->mpa_rx.len_arr[pind];
}
MP_RX_AGGR_BUF_RESET(card);
}
rx_curr_single:
if (f_do_rx_cur) {
dev_dbg(adapter->dev, "info: RX: port: %d, rx_len: %d\n",
port, rx_len);
if (mwifiex_sdio_card_to_host(adapter, &pkt_type,
skb->data, skb->len,
adapter->ioport + port))
return -1;
mwifiex_decode_rx_packet(adapter, skb, pkt_type);
}
return 0;
}
static int mwifiex_sdio_card_to_host_mp_aggr(struct mwifiex_adapter *adapter,
struct sk_buff *skb, u8 port)
{
struct sdio_mmc_card *card = adapter->card;
s32 f_do_rx_aggr = 0;
s32 f_do_rx_cur = 0;
s32 f_aggr_cur = 0;
struct sk_buff *skb_deaggr;
u32 pind;
u32 pkt_len, pkt_type = 0;
u8 *curr_ptr;
u32 rx_len = skb->len;
if (port == CTRL_PORT) {
dev_dbg(adapter->dev, "info: %s: no aggregation for cmd "
"response\n", __func__);
f_do_rx_cur = 1;
goto rx_curr_single;
}
if (!card->mpa_rx.enabled) {
dev_dbg(adapter->dev, "info: %s: rx aggregation disabled\n",
__func__);
f_do_rx_cur = 1;
goto rx_curr_single;
}
if (card->mp_rd_bitmap & (~((u16) CTRL_PORT_MASK))) {
dev_dbg(adapter->dev, "info: %s: not last packet\n", __func__);
if (MP_RX_AGGR_IN_PROGRESS(card)) {
if (MP_RX_AGGR_BUF_HAS_ROOM(card, skb->len)) {
f_aggr_cur = 1;
} else {
f_do_rx_aggr = 1;
f_do_rx_cur = 1;
}
} else {
f_aggr_cur = 1;
}
} else {
dev_dbg(adapter->dev, "info: %s: last packet\n", __func__);
if (MP_RX_AGGR_IN_PROGRESS(card)) {
f_do_rx_aggr = 1;
if (MP_RX_AGGR_BUF_HAS_ROOM(card, skb->len))
f_aggr_cur = 1;
else
f_do_rx_cur = 1;
} else {
f_do_rx_cur = 1;
}
}
if (f_aggr_cur) {
dev_dbg(adapter->dev, "info: current packet aggregation\n");
MP_RX_AGGR_SETUP(card, skb, port);
if (MP_RX_AGGR_PKT_LIMIT_REACHED(card) ||
MP_RX_AGGR_PORT_LIMIT_REACHED(card)) {
dev_dbg(adapter->dev, "info: %s: aggregated packet "
"limit reached\n", __func__);
f_do_rx_aggr = 1;
}
}
if (f_do_rx_aggr) {
dev_dbg(adapter->dev, "info: do_rx_aggr: num of packets: %d\n",
card->mpa_rx.pkt_cnt);
if (mwifiex_read_data_sync(adapter, card->mpa_rx.buf,
card->mpa_rx.buf_len,
(adapter->ioport | 0x1000 |
(card->mpa_rx.ports << 4)) +
card->mpa_rx.start_port, 1))
goto error;
curr_ptr = card->mpa_rx.buf;
for (pind = 0; pind < card->mpa_rx.pkt_cnt; pind++) {
pkt_len = *(u16 *) &curr_ptr[0];
pkt_type = *(u16 *) &curr_ptr[2];
skb_deaggr = card->mpa_rx.skb_arr[pind];
if ((pkt_type == MWIFIEX_TYPE_DATA) && (pkt_len <=
card->mpa_rx.len_arr[pind])) {
memcpy(skb_deaggr->data, curr_ptr, pkt_len);
skb_trim(skb_deaggr, pkt_len);
mwifiex_decode_rx_packet(adapter, skb_deaggr,
pkt_type);
} else {
dev_err(adapter->dev, "wrong aggr pkt:"
" type=%d len=%d max_len=%d\n",
pkt_type, pkt_len,
card->mpa_rx.len_arr[pind]);
dev_kfree_skb_any(skb_deaggr);
}
curr_ptr += card->mpa_rx.len_arr[pind];
}
MP_RX_AGGR_BUF_RESET(card);
}
rx_curr_single:
if (f_do_rx_cur) {
dev_dbg(adapter->dev, "info: RX: port: %d, rx_len: %d\n",
port, rx_len);
if (mwifiex_sdio_card_to_host(adapter, &pkt_type,
skb->data, skb->len,
adapter->ioport + port))
goto error;
mwifiex_decode_rx_packet(adapter, skb, pkt_type);
}
return 0;
error:
if (MP_RX_AGGR_IN_PROGRESS(card)) {
for (pind = 0; pind < card->mpa_rx.pkt_cnt; pind++) {
skb_deaggr = card->mpa_rx.skb_arr[pind];
dev_kfree_skb_any(skb_deaggr);
}
MP_RX_AGGR_BUF_RESET(card);
}
if (f_do_rx_cur)
dev_kfree_skb_any(skb);
return -1;
}
/**
* @brief This function receives data from the card in aggregate mode.
*
* @param pmadapter A pointer to mlan_adapter structure
* @param pmbuf A pointer to the SDIO data/cmd buffer
* @param port Current port on which packet needs to be rxed
* @param rx_len Length of received packet
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
*/
static mlan_status
wlan_sdio_card_to_host_mp_aggr(mlan_adapter * pmadapter, mlan_buffer
* pmbuf, t_u8 port, t_u16 rx_len)
{
mlan_status ret = MLAN_STATUS_SUCCESS;
pmlan_callbacks pcb = &pmadapter->callbacks;
t_s32 f_do_rx_aggr = 0;
t_s32 f_do_rx_cur = 0;
t_s32 f_aggr_cur = 0;
mlan_buffer mbuf_aggr;
mlan_buffer *mbuf_deaggr;
t_u32 pind = 0;
t_u32 pkt_len, pkt_type = 0;
t_u8 *curr_ptr;
t_u32 cmd53_port = 0;
ENTER();
if (port == CTRL_PORT) {
/* Read the command response or event without aggr */
PRINTM(MINFO,
"card_2_host_mp_aggr: No aggr for control port\n");
f_do_rx_cur = 1;
goto rx_curr_single;
}
if (!pmadapter->mpa_rx.enabled) {
PRINTM(MINFO,
"card_2_host_mp_aggr: rx aggregation disabled !\n");
f_do_rx_cur = 1;
goto rx_curr_single;
}
if (pmadapter->mp_rd_bitmap & (~((t_u32) CTRL_PORT_MASK))) {
/* Some more data RX pending */
PRINTM(MINFO, "card_2_host_mp_aggr: Not last packet\n");
if (MP_RX_AGGR_IN_PROGRESS(pmadapter)) {
if (MP_RX_AGGR_BUF_HAS_ROOM(pmadapter, rx_len)) {
f_aggr_cur = 1;
} else {
/* No room in Aggr buf, do rx aggr now */
f_do_rx_aggr = 1;
f_do_rx_cur = 1;
}
} else {
/* Rx aggr not in progress */
f_aggr_cur = 1;
}
} else {
/* No more data RX pending */
PRINTM(MINFO, "card_2_host_mp_aggr: Last packet\n");
if (MP_RX_AGGR_IN_PROGRESS(pmadapter)) {
f_do_rx_aggr = 1;
if (MP_RX_AGGR_BUF_HAS_ROOM(pmadapter, rx_len)) {
f_aggr_cur = 1;
} else {
/* No room in Aggr buf, do rx aggr now */
f_do_rx_cur = 1;
}
} else {
f_do_rx_cur = 1;
}
}
if (f_aggr_cur) {
PRINTM(MINFO, "Current packet aggregation.\n");
/* Curr pkt can be aggregated */
MP_RX_AGGR_SETUP(pmadapter, pmbuf, port, rx_len);
if (MP_RX_AGGR_PKT_LIMIT_REACHED(pmadapter) ||
MP_RX_AGGR_PORT_LIMIT_REACHED(pmadapter)) {
PRINTM(MINFO,
"card_2_host_mp_aggr: Aggregation Packet limit reached\n");
/* No more pkts allowed in Aggr buf, rx it */
f_do_rx_aggr = 1;
}
}
if (f_do_rx_aggr) {
/* do aggr RX now */
PRINTM(MINFO, "do_rx_aggr: num of packets: %d\n",
pmadapter->mpa_rx.pkt_cnt);
memset(pmadapter, &mbuf_aggr, 0, sizeof(mlan_buffer));
mbuf_aggr.pbuf = (t_u8 *) pmadapter->mpa_rx.buf;
mbuf_aggr.data_len = pmadapter->mpa_rx.buf_len;
cmd53_port = (pmadapter->ioport | SDIO_MPA_ADDR_BASE |
(pmadapter->mpa_rx.ports << 4)) +
pmadapter->mpa_rx.start_port;
if (MLAN_STATUS_SUCCESS !=
pcb->moal_read_data_sync(pmadapter->pmoal_handle,
&mbuf_aggr, cmd53_port, 0)) {
pmbuf->status_code = MLAN_ERROR_DATA_RX_FAIL;
ret = MLAN_STATUS_FAILURE;
goto done;
}
DBG_HEXDUMP(MIF_D, "SDIO MP-A Blk Rd", pmadapter->mpa_rx.buf,
MIN(pmadapter->mpa_rx.buf_len, MAX_DATA_DUMP_LEN));
curr_ptr = pmadapter->mpa_rx.buf;
for (pind = 0; pind < pmadapter->mpa_rx.pkt_cnt; pind++) {
/* get curr PKT len & type */
pkt_len = wlan_le16_to_cpu(*(t_u16 *) & curr_ptr[0]);
pkt_type = wlan_le16_to_cpu(*(t_u16 *) & curr_ptr[2]);
PRINTM(MINFO, "RX: [%d] pktlen: %d pkt_type: 0x%x\n",
pind, pkt_len, pkt_type);
/* copy pkt to deaggr buf */
mbuf_deaggr = pmadapter->mpa_rx.mbuf_arr[pind];
if ((pkt_type == MLAN_TYPE_DATA) &&
(pkt_len <= pmadapter->mpa_rx.len_arr[pind])) {
memcpy(pmadapter,
mbuf_deaggr->pbuf +
mbuf_deaggr->data_offset, curr_ptr,
pkt_len);
pmadapter->upld_len = pkt_len;
/* Process de-aggr packet */
wlan_decode_rx_packet(pmadapter, mbuf_deaggr,
pkt_type);
} else {
PRINTM(MERROR,
"Wrong aggr packet: type=%d, len=%d, max_len=%d\n",
pkt_type, pkt_len,
pmadapter->mpa_rx.len_arr[pind]);
wlan_free_mlan_buffer(pmadapter, mbuf_deaggr);
}
curr_ptr += pmadapter->mpa_rx.len_arr[pind];
}
MP_RX_AGGR_BUF_RESET(pmadapter);
}
rx_curr_single:
if (f_do_rx_cur) {
PRINTM(MINFO, "RX: f_do_rx_cur: port: %d rx_len: %d\n", port,
rx_len);
if (MLAN_STATUS_SUCCESS !=
wlan_sdio_card_to_host(pmadapter, &pkt_type,
(t_u32 *) & pmadapter->upld_len,
pmbuf, rx_len,
pmadapter->ioport + port)) {
ret = MLAN_STATUS_FAILURE;
goto done;
}
if ((port == CTRL_PORT) && ((pkt_type != MLAN_TYPE_EVENT) &&
(pkt_type != MLAN_TYPE_CMD))) {
PRINTM(MERROR,
"Wrong pkt from CTRL PORT: type=%d, len=%dd\n",
pkt_type, pmbuf->data_len);
pmbuf->status_code = MLAN_ERROR_DATA_RX_FAIL;
ret = MLAN_STATUS_FAILURE;
goto done;
}
wlan_decode_rx_packet(pmadapter, pmbuf, pkt_type);
}
done:
if (ret == MLAN_STATUS_FAILURE) {
if (MP_RX_AGGR_IN_PROGRESS(pmadapter)) {
/* MP-A transfer failed - cleanup */
for (pind = 0; pind < pmadapter->mpa_rx.pkt_cnt; pind++) {
wlan_free_mlan_buffer(pmadapter,
pmadapter->mpa_rx.
mbuf_arr[pind]);
}
MP_RX_AGGR_BUF_RESET(pmadapter);
}
if (f_do_rx_cur) {
/* Single Transfer pending */
/* Free curr buff also */
wlan_free_mlan_buffer(pmadapter, pmbuf);
}
}
LEAVE();
return ret;
}
