static int generic_suspend(struct usb_device *udev, pm_message_t msg)
{
int rc;
MYDBG("udev : %x", (unsigned int)udev);
/* Normal USB devices suspend through their upstream port.
* Root hubs don't have upstream ports to suspend,
* so we have to shut down their downstream HC-to-USB
* interfaces manually by doing a bus (or "global") suspend.
*/
if (!udev->parent)
{
MYDBG("");
rc = hcd_bus_suspend(udev, msg);
}
/* Non-root devices don't need to do anything for FREEZE or PRETHAW */
else if (msg.event == PM_EVENT_FREEZE || msg.event == PM_EVENT_PRETHAW)
{
MYDBG("");
rc = 0;
}
else
{
MYDBG("");
rc = usb_port_suspend(udev, msg);
}
return rc;
}
QString try_load_start_of_file(const QString &url, const off_t maxreadsize, const qint64 wholetimeout_msec, const qint64 sleep_usec)
{
MYDBG("try_load_start_of_file: %s, read first %lu bytes, fail after %lu msec", qPrintable(url), (unsigned long)maxreadsize, (unsigned long)wholetimeout_msec);
QStringList errors;
AsyncReadFile ASF(url, false, maxreadsize);
QElapsedTimer timer;
timer.start();
bool made_progress;
while(ASF.iter(&errors, NULL, &made_progress)) {
const qint64 timepassed_msec = timer.elapsed();
if(timepassed_msec > wholetimeout_msec) {
errors.append(QStringLiteral("took too long"));
const QString ret = errors.join(QStringLiteral("; "));
MYDBG("try_load_start_of_file: FAILURE %s", qPrintable(ret));
return ret;
}
if(!made_progress) {
const qint64 time_still_allowed_msec = wholetimeout_msec - timepassed_msec;
const qint64 timetosleep_usec = qMin(sleep_usec, 1000 * time_still_allowed_msec);
::usleep(timetosleep_usec);
}
QCoreApplication::processEvents();
}
const QString ret = errors.join(QStringLiteral("; "));
if(ret.isEmpty()) {
MYDBG("try_load_start_of_file: success");
}
else {
MYDBG("try_load_start_of_file: FAILURE %s", qPrintable(ret));
}
return ret;
}
void async_slurp_file(const QString &url, QStringList &errors, QByteArray &contents, const qint64 wholetimeout_msec, const qint64 sleep_usec)
{
MYDBG("async_slurp_file: %s, fail after %lu msec", qPrintable(url), (unsigned long)wholetimeout_msec);
AsyncReadFile ASF(url, true, -1);
QElapsedTimer timer;
timer.start();
bool made_progress;
while(ASF.iter(&errors, &contents, &made_progress)) {
const qint64 timepassed_msec = timer.elapsed();
if(timepassed_msec > wholetimeout_msec) {
errors.append(QStringLiteral("took too long"));
MYDBG("async_slurp_file: FAILURE %s", qPrintable(errors.join(QLatin1String("; "))));
return;
}
if(!made_progress) {
const qint64 time_still_allowed_msec = wholetimeout_msec - timepassed_msec;
const qint64 timetosleep_usec = qMin(sleep_usec, 1000 * time_still_allowed_msec);
::usleep(timetosleep_usec);
}
QCoreApplication::processEvents();
}
if(errors.isEmpty()) {
MYDBG("async_slurp_file: success");
}
else {
MYDBG("async_slurp_file: FAILURE %s", qPrintable(errors.join(QLatin1String("; "))));
}
}
static int generic_resume(struct usb_device *udev, pm_message_t msg)
{
int rc;
MYDBG("udev : %x", (unsigned int)udev);
/* Normal USB devices resume/reset through their upstream port.
* Root hubs don't have upstream ports to resume or reset,
* so we have to start up their downstream HC-to-USB
* interfaces manually by doing a bus (or "global") resume.
*/
if (!udev->parent)
{
MYDBG("udev : %x", (unsigned int)udev);
rc = hcd_bus_resume(udev, msg);
}
else
{
MYDBG("udev : %x", (unsigned int)udev);
rc = usb_port_resume(udev, msg);
}
return rc;
}
static void musbfsh_port_suspend(struct musbfsh *musbfsh, bool do_suspend)
{
u8 power;
u8 intrusbe;
u8 intrusb;
void __iomem *mbase = musbfsh->mregs;
int retries = 0;
/* MYDBG("cpuid:%d\n", smp_processor_id()); */
/* NOTE: this doesn't necessarily put PHY into low power mode,
* turning off its clock; that's a function of PHY integration and
* MUSBFSH_POWER_ENSUSPEND. PHY may need a clock (sigh) to detect
* SE0 changing to connect (J) or wakeup (K) states.
*/
if (do_suspend) {
#ifdef CONFIG_MTK_DT_USB_SUPPORT
if (musbfsh_skip_port_suspend) {
MYDBG("\n");
musbfsh->port1_status |= USB_PORT_STAT_SUSPEND;
return;
}
#endif
/* clean MUSBFSH_INTR_SOF in MUSBFSH_INTRUSBE */
intrusbe = musbfsh_readb(mbase, MUSBFSH_INTRUSBE);
intrusbe &= ~MUSBFSH_INTR_SOF;
musbfsh_writeb(mbase, MUSBFSH_INTRUSBE, intrusbe);
mb(); /* flush POWER and PHY setting immediately */
/* clean MUSBFSH_INTR_SOF in MUSBFSH_INTRUSB */
intrusb = musbfsh_readb(mbase, MUSBFSH_INTRUSB);
intrusb |= MUSBFSH_INTR_SOF;
musbfsh_writeb(mbase, MUSBFSH_INTRUSB, intrusb);
mb(); /* flush POWER and PHY setting immediately */
retries = 10000;
intrusb = musbfsh_readb(mbase, MUSBFSH_INTRUSB);
while (!(intrusb & MUSBFSH_INTR_SOF)) {
intrusb = musbfsh_readb(mbase, MUSBFSH_INTRUSB);
if (retries-- < 1) {
MYDBG("\n");
break;
}
}
/* delay 10 us */
udelay(10);
/* set MUSBFSH_POWER_SUSPENDM in MUSBFSH_POWER_SUSPENDM */
power = musbfsh_readb(mbase, MUSBFSH_POWER);
#ifdef CONFIG_MTK_DT_USB_SUPPORT
#if defined(CONFIG_PM_RUNTIME) && defined(USB11_REMOTE_IRQ_NON_AUTO_MASK)
disable_remote_wake_up();
#endif
#endif
#ifdef MTK_USB_RUNTIME_SUPPORT
/*
* mask remote wake up IRQ between port suspend and bus suspend.
* hub.c will call set_port_feature first then
* usb_set_device_state, so if EINT comes between them,
* resume flow may see device state without USB_STATE_SUSPENDED
* and do nothing.
* So we postpone remote wake up IRQ until the suspend flow
* is all done (when bus_suspend is called). Since suspend flow
* may be interrupted (root hub is suspended, but not host
* controller), so we also unmaks EINT when resume is done.
*/
mt_eint_mask(CUST_EINT_MT6280_USB_WAKEUP_NUM);
#endif
retries = 10000;
#ifdef CONFIG_MTK_ICUSB_SUPPORT
if (skip_port_pm_attr.value) {
MYDBG("skip hw operation for port suspend\n");
} else {
power &= ~MUSBFSH_POWER_RESUME;
power |= MUSBFSH_POWER_SUSPENDM;
musbfsh_writeb(mbase, MUSBFSH_POWER, power);
/* Needed for OPT A tests */
power = musbfsh_readb(mbase, MUSBFSH_POWER);
while (power & MUSBFSH_POWER_SUSPENDM) {
power = musbfsh_readb(mbase, MUSBFSH_POWER);
if (retries-- < 1)
break;
}
}
#else
power &= ~MUSBFSH_POWER_RESUME;
power |= MUSBFSH_POWER_SUSPENDM;
musbfsh_writeb(mbase, MUSBFSH_POWER, power);
/* Needed for OPT A tests */
power = musbfsh_readb(mbase, MUSBFSH_POWER);
while (power & MUSBFSH_POWER_SUSPENDM) {
power = musbfsh_readb(mbase, MUSBFSH_POWER);
if (retries-- < 1) {
MYDBG("\n");
break;
}
}
#endif
mb(); /* flush POWER and PHY setting immediately */
WARNING("Root port suspended, power 0x%02x\n", power);
#ifdef CONFIG_MTK_DT_USB_SUPPORT
#if defined(CONFIG_PM_RUNTIME)
disable_usb11_clk();
#endif
#endif
musbfsh->port1_status |= USB_PORT_STAT_SUSPEND;
} else {
#ifdef CONFIG_MTK_DT_USB_SUPPORT
if (musbfsh_skip_port_resume) {
MYDBG("\n");
request_wakeup_md_timeout(0, 0);
musbfsh->port1_status |= MUSBFSH_PORT_STAT_RESUME;
musbfsh->rh_timer = jiffies + msecs_to_jiffies(20);
return;
}
#if defined(CONFIG_PM_RUNTIME)
enable_usb11_clk();
#endif
#endif
power = musbfsh_readb(mbase, MUSBFSH_POWER);
if (!(power & MUSBFSH_POWER_SUSPENDM)) {
WARNING("Root port resuming abort, power 0x%02x\n",
power);
if (power & MUSBFSH_POWER_RESUME)
goto finish;
else
return;
}
#ifdef CONFIG_MTK_DT_USB_SUPPORT
request_wakeup_md_timeout(0, 0);
#endif
#ifdef MTK_USB_RUNTIME_SUPPORT
/* ERR("EINT to wake up MD for resume\n"); */
/* request_wakeup_md_timeout(0, 0); //wx, wakeup MD first */
#endif
#ifdef CONFIG_MTK_ICUSB_SUPPORT
if (skip_port_pm_attr.value) {
MYDBG("skip hw operation for port resume\n");
} else {
power &= ~MUSBFSH_POWER_SUSPENDM;
power |= MUSBFSH_POWER_RESUME;
musbfsh_writeb(mbase, MUSBFSH_POWER, power);
}
#else
power &= ~MUSBFSH_POWER_SUSPENDM;
power |= MUSBFSH_POWER_RESUME;
musbfsh_writeb(mbase, MUSBFSH_POWER, power);
#endif
mb(); /* flush POWER and PHY setting immediately */
WARNING("Root port resuming, power 0x%02x\n", power);
finish:
/* later, GetPortStatus will stop RESUME signaling */
musbfsh->port1_status |= MUSBFSH_PORT_STAT_RESUME;
musbfsh->rh_timer = jiffies + msecs_to_jiffies(20);
}
}
int musbfsh_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
u16 wIndex, char *buf, u16 wLength)
{
struct musbfsh *musbfsh = hcd_to_musbfsh(hcd);
u32 temp;
int retval = 0;
unsigned long flags;
INFO("%s++, typeReq=0x%x, wValue=0x%x, wIndex=0x%x\r\n",
__func__, typeReq, wValue, wIndex);
spin_lock_irqsave(&musbfsh->lock, flags);
if (unlikely(!HCD_HW_ACCESSIBLE(hcd))) {
spin_unlock_irqrestore(&musbfsh->lock, flags);
return -ESHUTDOWN;
}
/* hub features: always zero, setting is a NOP
* port features: reported, sometimes updated when host is active
* no indicators
*/
switch (typeReq) {
case ClearHubFeature:
case SetHubFeature:
switch (wValue) {
case C_HUB_OVER_CURRENT:
case C_HUB_LOCAL_POWER:
break;
default:
goto error;
}
break;
case ClearPortFeature:
/* wIndex indicate the port number, here it is should be 1 */
if ((wIndex & 0xff) != 1)
goto error;
switch (wValue) {
case USB_PORT_FEAT_ENABLE:
break;
case USB_PORT_FEAT_SUSPEND:
/* here is clearing the suspend */
musbfsh_port_suspend(musbfsh, false);
break;
case USB_PORT_FEAT_POWER:
#ifndef MTK_ALPS_BOX_SUPPORT
/* only power off the vbus */
musbfsh_set_vbus(musbfsh, 0);
#else
/* only power off the vbus */
musbfsh_platform_set_vbus(musbfsh, 0);
#endif
break;
case USB_PORT_FEAT_C_CONNECTION:
case USB_PORT_FEAT_C_ENABLE:
case USB_PORT_FEAT_C_OVER_CURRENT:
case USB_PORT_FEAT_C_RESET:
case USB_PORT_FEAT_C_SUSPEND:
break;
default:
goto error;
}
INFO("clear feature %d\n", wValue);
musbfsh->port1_status &= ~(1 << wValue);
break;
case GetHubDescriptor:
{
struct usb_hub_descriptor *desc = (void *)buf;
desc->bDescLength = 9;
desc->bDescriptorType = 0x29;
desc->bNbrPorts = 1;
/* 0x0001: per-port power switching */
/* 0x0010: no overcurrent reporting */
desc->wHubCharacteristics =
cpu_to_le16(0x0001 | 0x0010);
/* msec/2 */
desc->bPwrOn2PwrGood = 5;
desc->bHubContrCurrent = 0;
/* workaround bogus struct definition */
desc->u.hs.DeviceRemovable[0] = 0x02; /* port 1 */
desc->u.hs.DeviceRemovable[1] = 0xff;
}
break;
case GetHubStatus:
temp = 0;
*(__le32 *)buf = cpu_to_le32(temp);
break;
case GetPortStatus:
if (wIndex != 1)
goto error;
/* finish RESET signaling? */
/* if FALSE: stop the reset because the timeout of reset. */
if ((musbfsh->port1_status & USB_PORT_STAT_RESET)
&& time_after_eq(jiffies, musbfsh->rh_timer))
musbfsh_port_reset(musbfsh, false);
/* finish RESUME signaling? */
if ((musbfsh->port1_status & MUSBFSH_PORT_STAT_RESUME)
&& time_after_eq(jiffies, musbfsh->rh_timer)) {
u8 pwr;
#ifdef CONFIG_MTK_DT_USB_SUPPORT
if (!musbfsh_skip_port_resume) {
pwr = musbfsh_readb(musbfsh->mregs,
MUSBFSH_POWER);
pwr &= ~MUSBFSH_POWER_RESUME;
WARNING("Root port resume stopped\n");
WARNING("power 0x%02x\n", pwr);
musbfsh_writeb(musbfsh->mregs, MUSBFSH_POWER,
pwr);
#if defined(CONFIG_PM_RUNTIME) && defined(USB11_REMOTE_IRQ_NON_AUTO_MASK)
enable_remote_wake_up();
#endif
} else {
MYDBG("\n");
}
#else
pwr = musbfsh_readb(musbfsh->mregs, MUSBFSH_POWER);
pwr &= ~MUSBFSH_POWER_RESUME;
WARNING("Root port resume stopped, power 0x%02x\n",
pwr);
musbfsh_writeb(musbfsh->mregs, MUSBFSH_POWER, pwr);
#endif
#ifdef MTK_USB_RUNTIME_SUPPORT
/* mt_eint_unmask(CUST_EINT_MT6280_USB_WAKEUP_NUM); */
#endif
/*
* ISSUE: DaVinci (RTL 1.300) disconnects after
* resume of high speed peripherals (but not full
* speed ones).
*/
musbfsh->is_active = 1;
musbfsh->port1_status &= ~(USB_PORT_STAT_SUSPEND
| MUSBFSH_PORT_STAT_RESUME);
musbfsh->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
usb_hcd_poll_rh_status(musbfsh_to_hcd(musbfsh));
}
put_unaligned(cpu_to_le32(musbfsh->port1_status &
~MUSBFSH_PORT_STAT_RESUME),
(__le32 *)buf);
/* port change status is more interesting */
WARNING("port status %08x,devctl=0x%x\n", musbfsh->port1_status,
musbfsh_readb(musbfsh->mregs, MUSBFSH_DEVCTL));
break;
case SetPortFeature:
if ((wIndex & 0xff) != 1)
goto error;
switch (wValue) {
case USB_PORT_FEAT_POWER:
/* NOTE: this controller has a strange state machine
* that involves "requesting sessions" according to
* magic side effects from incompletely-described
* rules about startup...
*
* This call is what really starts the host mode; be
* very careful about side effects if you reorder any
* initialization logic, e.g. for OTG, or change any
* logic relating to VBUS power-up.
*/
INFO("musbfsh_start is called in hub control\r\n");
#ifdef CONFIG_MTK_ICUSB_SUPPORT
if (skip_mac_init_attr.value)
MYDBG("");
else
musbfsh_start(musbfsh);
#else
musbfsh_start(musbfsh);
#endif
break;
case USB_PORT_FEAT_RESET:
/* enable the reset, but not finish */
musbfsh_port_reset(musbfsh, true);
break;
case USB_PORT_FEAT_SUSPEND:
musbfsh_port_suspend(musbfsh, true);
break;
case USB_PORT_FEAT_TEST:
#if 0
if (unlikely(is_host_active(musbfsh)))
goto error;
wIndex >>= 8;
switch (wIndex) {
case 1:
pr_debug("TEST_J\n");
temp = MUSBFSH_TEST_J;
break;
case 2:
pr_debug("TEST_K\n");
temp = MUSBFSH_TEST_K;
break;
case 3:
pr_debug("TEST_SE0_NAK\n");
temp = MUSBFSH_TEST_SE0_NAK;
break;
case 4:
pr_debug("TEST_PACKET\n");
temp = MUSBFSH_TEST_PACKET;
musbfsh_load_testpacket(musbfsh);
break;
case 5:
pr_debug("TEST_FORCE_ENABLE\n");
temp = MUSBFSH_TEST_FORCE_HOST |
MUSBFSH_TEST_FORCE_FS;
musbfsh_writeb(musbfsh->mregs, MUSBFSH_DEVCTL,
MUSBFSH_DEVCTL_SESSION);
break;
case 6:
pr_debug("TEST_FIFO_ACCESS\n");
temp = MUSBFSH_TEST_FIFO_ACCESS;
break;
default:
goto error;
}
musbfsh_writeb(musbfsh->mregs, MUSBFSH_TESTMODE, temp);
#endif
break;
default:
goto error;
}
INFO("set feature %d\n", wValue);
musbfsh->port1_status |= 1 << wValue;
break;
default:
error:
/* "protocol stall" on error */
retval = -EPIPE;
}
spin_unlock_irqrestore(&musbfsh->lock, flags);
return retval;
}
static void musbfsh_port_reset(struct musbfsh *musbfsh, bool do_reset)
{
u8 power;
void __iomem *mbase = musbfsh->mregs;
/* NOTE: caller guarantees it will turn off the reset when
* the appropriate amount of time has passed
*/
power = musbfsh_readb(mbase, MUSBFSH_POWER);
WARNING("reset=%d power=0x%x\n", do_reset, power);
if (do_reset) {
if (power & MUSBFSH_POWER_SUSPENDM) {
WARNING("reset a suspended device\n");
#ifdef CONFIG_MTK_DT_USB_SUPPORT
request_wakeup_md_timeout(0, 0);
#endif
#ifdef MTK_USB_RUNTIME_SUPPORT
/* ERR("EINT to wake up MD for reset\n"); */
/* wx, we may have to reset a suspended MD */
/* request_wakeup_md_timeout(0, 0); */
#endif
musbfsh_writeb(mbase,
MUSBFSH_POWER, power |
MUSBFSH_POWER_RESUME);
mdelay(20);
musbfsh_writeb(mbase, MUSBFSH_POWER,
power & ~MUSBFSH_POWER_RESUME);
}
/*
* If RESUME is set, we must make sure it stays minimum 20 ms.
* Then we must clear RESUME and wait a bit to let musb start
* generating SOFs. If we don't do this, OPT HS A 6.8 tests
* fail with "Error! Did not receive an SOF before suspend
* detected".
*/
if (power & MUSBFSH_POWER_RESUME) {
WARNING("reset a resuming device\n");
while (time_before(jiffies, musbfsh->rh_timer))
mdelay(1);
/* stop the resume signal */
musbfsh_writeb(mbase, MUSBFSH_POWER,
power & ~MUSBFSH_POWER_RESUME);
mdelay(1);
}
musbfsh->ignore_disconnect = true;
power &= 0xf0;
musbfsh_writeb(mbase, MUSBFSH_POWER,
power | MUSBFSH_POWER_RESET);
mb(); /* flush POWER and PHY setting immediately */
musbfsh->port1_status |= USB_PORT_STAT_RESET;
musbfsh->port1_status &= ~USB_PORT_STAT_ENABLE;
musbfsh->rh_timer = jiffies + msecs_to_jiffies(50);
} else {
INFO("Root port reset stopped\n");
#ifdef CONFIG_MTK_ICUSB_SUPPORT
if (resistor_control_attr.value) {
/* improve signal quality, from Dingjun */
#if 0
/* FS_DISC_DISABLE */
u32 TM1;
TM1 = musbfsh_readl(mbase, 0x604);
musbfsh_writel(mbase, 0x604, TM1 | 0x4);
MYDBG("set FS_DISC_DISABLE\n");
#endif
/* original flow from SS5 */
USB11PHY_SET8(U1PHTCR2,
force_usb11_dm_rpd | force_usb11_dp_rpd);
/*
* disconnect host port's pull down resistors
* on D+ and D-
*/
USB11PHY_CLR8(U1PHTCR2,
RG_USB11_DM_RPD | RG_USB11_DP_RPD);
/*
* Tell MAC there still is a device attached,
* ohterwise we will get disconnect interrupt
*/
USB11PHY_SET8(U1PHTCR2,
force_usb11_dp_rpu | RG_USB11_DP_RPU);
/* force */
USB11PHY_SET8(0x6a, 0x20 | 0x10);
/* RG */
/*
* disconnect host port's pull down resistors
* on D+ and D-
*/
USB11PHY_CLR8(0x68, 0x80 | 0x40);
/*
* Tell MAC there still is a device attached,
* ohterwise we will get disconnect interrupt.
*/
/* USB11PHY_SET8(U1PHTCR2,
* force_usb11_dp_rpu |
* RG_USB11_DP_RPU);
*/
MYDBG("USB1.1 PHY special config for IC-USB\n");
} else {
MYDBG("");
}
#endif
musbfsh_writeb(mbase,
MUSBFSH_POWER, power & ~MUSBFSH_POWER_RESET);
#ifdef CONFIG_MTK_ICUSB_SUPPORT
if (resistor_control_attr.value)
USB11PHY_CLR8(0x6a, 0x20 | 0x10);
else
MYDBG("");
#endif
mb(); /* flush POWER and PHY setting immediately */
musbfsh->ignore_disconnect = false;
power = musbfsh_readb(mbase, MUSBFSH_POWER);
if (power & MUSBFSH_POWER_HSMODE) {
INFO("high-speed device connected\n");
musbfsh->port1_status |= USB_PORT_STAT_HIGH_SPEED;
}
#if 0 /* IC_USB from SS5 */
#ifdef IC_USB
USB11PHY_SET8(U1PHTCR2,
force_usb11_dm_rpd | force_usb11_dp_rpd);
/* disconnect host port's pull down resistors on D+ and D- */
USB11PHY_CLR8(U1PHTCR2, RG_USB11_DM_RPD | RG_USB11_DP_RPD);
/*
* tell MAC there still is a device attached,
* ohterwise we will get disconnect interrupt
*/
USB11PHY_SET8(U1PHTCR2, force_usb11_dp_rpu | RG_USB11_DP_RPU);
WARNING("USB1.1 PHY special config for IC-USB 0x%X=%x\n",
U1PHTCR2, USB11PHY_READ8(U1PHTCR2));
#endif
#endif
musbfsh->port1_status &= ~USB_PORT_STAT_RESET;
musbfsh->port1_status |=
USB_PORT_STAT_ENABLE | (USB_PORT_STAT_C_RESET << 16) |
(USB_PORT_STAT_C_ENABLE << 16);
/* call back func to notify the hub thread the state of hub! */
usb_hcd_poll_rh_status(musbfsh_to_hcd(musbfsh));
musbfsh->vbuserr_retry = VBUSERR_RETRY_COUNT;
}
}
int usb_choose_configuration(struct usb_device *udev)
{
int i;
int num_configs;
int insufficient_power = 0;
struct usb_host_config *c, *best;
if (usb_device_is_owned(udev))
return 0;
best = NULL;
c = udev->config;
num_configs = udev->descriptor.bNumConfigurations;
for (i = 0; i < num_configs; (i++, c++)) {
struct usb_interface_descriptor *desc = NULL;
/* It's possible that a config has no interfaces! */
if (c->desc.bNumInterfaces > 0)
desc = &c->intf_cache[0]->altsetting->desc;
/*
* HP's USB bus-powered keyboard has only one configuration
* and it claims to be self-powered; other devices may have
* similar errors in their descriptors. If the next test
* were allowed to execute, such configurations would always
* be rejected and the devices would not work as expected.
* In the meantime, we run the risk of selecting a config
* that requires external power at a time when that power
* isn't available. It seems to be the lesser of two evils.
*
* Bugzilla #6448 reports a device that appears to crash
* when it receives a GET_DEVICE_STATUS request! We don't
* have any other way to tell whether a device is self-powered,
* but since we don't use that information anywhere but here,
* the call has been removed.
*
* Maybe the GET_DEVICE_STATUS call and the test below can
* be reinstated when device firmwares become more reliable.
* Don't hold your breath.
*/
#if 0
/* Rule out self-powered configs for a bus-powered device */
if (bus_powered && (c->desc.bmAttributes &
USB_CONFIG_ATT_SELFPOWER))
continue;
#endif
/*
* The next test may not be as effective as it should be.
* Some hubs have errors in their descriptor, claiming
* to be self-powered when they are really bus-powered.
* We will overestimate the amount of current such hubs
* make available for each port.
*
* This is a fairly benign sort of failure. It won't
* cause us to reject configurations that we should have
* accepted.
*/
/* Rule out configs that draw too much bus current */
if (usb_get_max_power(udev, c) > udev->bus_mA) {
insufficient_power++;
MYDBG("insufficient available bus power to %d intf, the intf class is 0x%x \n", desc->bInterfaceNumber , desc->bInterfaceClass);
continue;
}
/* When the first config's first interface is one of Microsoft's
* pet nonstandard Ethernet-over-USB protocols, ignore it unless
* this kernel has enabled the necessary host side driver.
* But: Don't ignore it if it's the only config.
*/
if (i == 0 && num_configs > 1 && desc &&
(is_rndis(desc) || is_activesync(desc))) {
#if !defined(CONFIG_USB_NET_RNDIS_HOST) && !defined(CONFIG_USB_NET_RNDIS_HOST_MODULE)
continue;
#else
best = c;
#endif
}
/* From the remaining configs, choose the first one whose
* first interface is for a non-vendor-specific class.
* Reason: Linux is more likely to have a class driver
* than a vendor-specific driver. */
else if (udev->descriptor.bDeviceClass !=
USB_CLASS_VENDOR_SPEC &&
(desc && desc->bInterfaceClass !=
USB_CLASS_VENDOR_SPEC)) {
best = c;
break;
}
/* If all the remaining configs are vendor-specific,
* choose the first one. */
else if (!best)
best = c;
}
if (insufficient_power > 0)
dev_info(&udev->dev, "rejected %d configuration%s "
"due to insufficient available bus power\n",
insufficient_power, plural(insufficient_power));
if (best) {
i = best->desc.bConfigurationValue;
dev_dbg(&udev->dev,
"configuration #%d chosen from %d choice%s\n",
i, num_configs, plural(num_configs));
} else {
i = -1;
dev_warn(&udev->dev,
"no configuration chosen from %d choice%s\n",
num_configs, plural(num_configs));
#ifdef CONFIG_USBIF_COMPLIANCE
if ((insufficient_power>0) && (insufficient_power==num_configs)){
MYDBG("insufficient available bus power to all intf\n");
usbif_u3h_send_event("DEV_OVER_CURRENT");
}
#endif
}
return i;
}
static int usb_dev_resume(struct device *dev)
{
MYDBG("");
return usb_resume(dev, PMSG_RESUME);
}
static int usb_dev_suspend(struct device *dev)
{
MYDBG("");
return usb_suspend(dev, PMSG_SUSPEND);
}
