/* @fn LoacationApp_Sleep
* @brief Sample Application set allow/disallow sleep mode.
* @return none*/
void LoacationApp_Sleep( uint8 allow ) {
#if defined( POWER_SAVING )
if ( allow ) {
osal_pwrmgr_task_state( NWK_TaskID, PWRMGR_CONSERVE );
NLME_SetPollRate( 0 );
} else {
osal_pwrmgr_task_state( NWK_TaskID, PWRMGR_HOLD );
NLME_SetPollRate( 1000 );
}
#endif
}
/**************************************************************************************************
* @fn MHMSAfMsgRx
*
* @brief This function is called by MHMSSysEvtMsg() to process an incoming AF message.
*
* input parameters
*
* @param msg - A pointer to the afIncomingMSGPacket_t packet.
*
* output parameters
*
* None.
*
* @return None.
**************************************************************************************************
*/
static void MHMSAfMsgRx(afIncomingMSGPacket_t *msg)
{
uint8 *buf = msg->cmd.Data;
if(PanEstablishedwithRouter == FALSE & devState == DEV_ZB_COORD){
if(zap_set_logicalType(ZG_DEVICETYPE_ROUTER)){
HalLcdWriteString("Ready",HAL_LCD_LINE_7);
}
PanEstablishedwithRouter = TRUE;
if (ZSuccess != osal_start_timerEx(MHMSTaskId, MHMS_EVT_ANN, MHMS_DLY_ANN))
{
(void)osal_set_event(MHMSTaskId, MHMS_EVT_ANN);
}
}
else if(PanEstablishedwithRouter == FALSE & devState == DEV_ROUTER){
HalLcdWriteString("Ready",HAL_LCD_LINE_7);
PanEstablishedwithRouter = TRUE;
}
else {
switch (buf[MHMS_CMD_IDX])
{
case MHMS_CMD_DAT: //msg cmd indicates that there is data to be rx
MHMSDataRx(msg);
break;
case MHMS_CMD_BEG: //msg cmd indicates that gate way has sent start cmd to field devices
if (INVALID_NODE_ADDR == MHMSAddr)
{
if(dev_gateway == FALSE){
NLME_SetPollRate(0);
if(MHMSEvtDat_sync == FALSE){
(void)osal_set_event(MHMSTaskId, MHMS_EVT_DAT); //Sync Pulsedat event operation
}
}
}
MHMSAddr = msg->srcAddr.addr.shortAddr;
break;
case MHMS_CMD_END:
NLME_SetPollRate(POLL_RATE);
MHMSAddr = INVALID_NODE_ADDR;
break;
case MHMS_CMD_DAT_TEST: //This is used for testing different payload sizes. Not used in normal operation
MHMSTestingDataRx(msg);
break;
default:
break;
}
} //end else
}
/**************************************************************************************************
* @fn pulseAfMsgRx
*
* @brief This function is called by pulseSysEvtMsg() to process an incoming AF message.
*
* input parameters
*
* @param msg - A pointer to the afIncomingMSGPacket_t packet.
*
* output parameters
*
* None.
*
* @return None.
**************************************************************************************************
*/
static void pulseAfMsgRx(afIncomingMSGPacket_t *msg)
{
uint8 *buf = msg->cmd.Data;
if(PanEstablishedwithRouter == FALSE & devState == DEV_ZB_COORD){
if(zap_set_logicalType(ZG_DEVICETYPE_ROUTER)){
HalLcdWriteString("Should be Router",HAL_LCD_LINE_7);
}
PanEstablishedwithRouter = TRUE;
if (ZSuccess != osal_start_timerEx(pulseTaskId, PULSE_EVT_ANN, PULSE_DLY_ANN))
{
(void)osal_set_event(pulseTaskId, PULSE_EVT_ANN);
}
}
else{
switch (buf[PULSE_CMD_IDX])
{
case PULSE_CMD_DAT: //Nodes will send this by default
pulseDataRx(msg);
break;
case PULSE_CMD_BEG:
if (INVALID_NODE_ADDR == pulseAddr)
{
NLME_SetPollRate(0);
if(PulseEvtDat_sync == FALSE){
(void)osal_set_event(pulseTaskId, PULSE_EVT_DAT); //Sync Pulsedat event operation
}
}
pulseAddr = msg->srcAddr.addr.shortAddr; // BUILD_UINT16(buf[PULSE_ADR_LSB], buf[PULSE_ADR_MSB]);
break;
case PULSE_CMD_END:
NLME_SetPollRate(POLL_RATE);
pulseAddr = INVALID_NODE_ADDR;
break;
case PULSE_CMD_DAT_TEST: //This is used for testing different payload sizes. Not used in normal operation
pulseTestingDataRx(msg);
break;
default:
break;
}
} //end else
}
/*********************************************************************
* @fn zclSampleSw_ProcessOTAMsgs
*
* @brief Called to process callbacks from the ZCL OTA.
*
* @param none
*
* @return none
*/
static void zclSampleSw_ProcessOTAMsgs( zclOTA_CallbackMsg_t* pMsg )
{
uint8 RxOnIdle;
switch(pMsg->ota_event)
{
case ZCL_OTA_START_CALLBACK:
if (pMsg->hdr.status == ZSuccess)
{
// Speed up the poll rate
RxOnIdle = TRUE;
ZMacSetReq( ZMacRxOnIdle, &RxOnIdle );
NLME_SetPollRate( 2000 );
}
break;
case ZCL_OTA_DL_COMPLETE_CALLBACK:
if (pMsg->hdr.status == ZSuccess)
{
// Reset the CRC Shadow and reboot. The bootloader will see the
// CRC shadow has been cleared and switch to the new image
HalOTAInvRC();
SystemReset();
}
else
{
// slow the poll rate back down.
RxOnIdle = FALSE;
ZMacSetReq( ZMacRxOnIdle, &RxOnIdle );
NLME_SetPollRate(DEVICE_POLL_RATE);
}
break;
default:
break;
}
}
/***************************************************************************************************
* @fn MT_NlmeJoinRequest
*
* @brief Join Request
*
* @param pBuf - pointer to the received buffer
*
* @return void
***************************************************************************************************/
void MT_NlmeJoinRequest(uint8 *pBuf)
{
uint8 retValue = ZFailure;
uint8 dummyExPANID[Z_EXTADDR_LEN] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
uint16 panID;
uint8 cmdId;
networkDesc_t *pNwkDesc;
/* parse header */
cmdId = pBuf[MT_RPC_POS_CMD1];
pBuf += MT_RPC_FRAME_HDR_SZ;
panID = BUILD_UINT16(pBuf[0], pBuf[1]);
if((pNwkDesc = nwk_getNetworkDesc(dummyExPANID,panID, pBuf[2])) != NULL )
{
if (pNwkDesc->chosenRouter == INVALID_NODE_ADDR )
{
retValue = ZNwkNotPermitted;
}
else
{
retValue = NLME_JoinRequest( dummyExPANID, panID, pBuf[2], pBuf[3],
pNwkDesc->chosenRouter, pNwkDesc->chosenRouterDepth );
}
}
else
{
retValue = ZNwkNotPermitted;
}
if ( pBuf[3] & CAPINFO_RCVR_ON_IDLE )
{
/* The receiver is on, turn network layer polling off. */
NLME_SetPollRate( 0 );
NLME_SetQueuedPollRate( 0 );
NLME_SetResponseRate( 0 );
}
/* Build and send back the response */
MT_BuildAndSendZToolResponse(((uint8)MT_RPC_CMD_SRSP | (uint8)MT_RPC_SYS_NWK), cmdId, 1, &retValue);
}
/***************************************************************************************************
* @fn MT_NlmeJoinRequest
*
* @brief Join Request
*
* @param pBuf - pointer to the received buffer
*
* @return void
***************************************************************************************************/
void MT_NlmeJoinRequest(uint8 *pBuf)
{
uint8 retValue = ZFailure;
uint8 dummyExPANID[Z_EXTADDR_LEN] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
uint8 cmdId;
/* parse header */
cmdId = pBuf[MT_RPC_POS_CMD1];
pBuf += MT_RPC_FRAME_HDR_SZ;
retValue = NLME_JoinRequest(dummyExPANID, BUILD_UINT16(pBuf[0], pBuf[1]), pBuf[2], pBuf[3]);
if ( pBuf[6] & CAPINFO_RCVR_ON_IDLE )
{
/* The receiver is on, turn network layer polling off. */
NLME_SetPollRate( 0 );
NLME_SetQueuedPollRate( 0 );
NLME_SetResponseRate( 0 );
}
/* Build and send back the response */
MT_BuildAndSendZToolResponse(((uint8)MT_RPC_CMD_SRSP | (uint8)MT_RPC_SYS_NWK), cmdId, 1, &retValue);
}
/*********************************************************************
* @fn pct_event_loop
*
* @brief Event Loop Processor for PCT
*
* @param uint8 task_id - the osal task id
* @param uint16 events - the event bitmask
*
* @return none
*/
uint16 pct_event_loop( uint8 task_id, uint16 events )
{
afIncomingMSGPacket_t *MSGpkt;
if ( events & SYS_EVENT_MSG )
{
while ( (MSGpkt = (afIncomingMSGPacket_t *)osal_msg_receive( pctTaskID )) )
{
switch ( MSGpkt->hdr.event )
{
case ZDO_CB_MSG:
pct_ProcessZDOMsgs( (zdoIncomingMsg_t *)MSGpkt );
break;
case ZCL_INCOMING_MSG:
// Incoming ZCL foundation command/response messages
pct_ProcessZCLMsg( (zclIncomingMsg_t *)MSGpkt );
break;
case KEY_CHANGE:
pct_HandleKeys( ((keyChange_t *)MSGpkt)->state, ((keyChange_t *)MSGpkt)->keys );
break;
case ZDO_STATE_CHANGE:
if (DEV_END_DEVICE == (devStates_t)(MSGpkt->hdr.status))
{
#if SECURE
{
// check to see if link key had already been established
linkKeyStatus = pct_KeyEstablish_ReturnLinkKey(ESPAddr.addr.shortAddr);
if (linkKeyStatus != ZSuccess)
{
cId_t cbkeCluster = ZCL_CLUSTER_ID_GEN_KEY_ESTABLISHMENT;
zAddrType_t dstAddr;
// Send out a match for the key establishment
dstAddr.addrMode = AddrBroadcast;
dstAddr.addr.shortAddr = NWK_BROADCAST_SHORTADDR;
ZDP_MatchDescReq( &dstAddr, NWK_BROADCAST_SHORTADDR, ZCL_SE_PROFILE_ID,
1, &cbkeCluster, 0, NULL, FALSE );
}
}
#endif
// Per smart energy spec end device polling requirement of not to poll < 7.5 seconds.
NLME_SetPollRate ( SE_DEVICE_POLL_RATE );
}
break;
#if defined( ZCL_KEY_ESTABLISH )
case ZCL_KEY_ESTABLISH_IND:
if ((MSGpkt->hdr.status) == TermKeyStatus_Success)
{
ESPAddr.endPoint = PCT_ENDPOINT; // set destination endpoint back to application endpoint
}
break;
#endif
default:
break;
}
// Release the memory
osal_msg_deallocate( (uint8 *)MSGpkt );
}
// return unprocessed events
return (events ^ SYS_EVENT_MSG);
}
// event to intiate key establishment request
if ( events & PCT_KEY_ESTABLISHMENT_REQUEST_EVT )
{
zclGeneral_KeyEstablish_InitiateKeyEstablishment(pctTaskID, &ESPAddr, pctTransID);
return ( events ^ PCT_KEY_ESTABLISHMENT_REQUEST_EVT );
}
// handle processing of identify timeout event triggered by an identify command
if ( events & PCT_IDENTIFY_TIMEOUT_EVT )
{
if ( pctIdentifyTime > 0 )
{
pctIdentifyTime--;
}
pct_ProcessIdentifyTimeChange();
return ( events ^ PCT_IDENTIFY_TIMEOUT_EVT );
}
// event to get current time
if ( events & PCT_UPDATE_TIME_EVT )
{
pctTime = osal_getClock();
osal_start_timerEx( pctTaskID, PCT_UPDATE_TIME_EVT, PCT_UPDATE_TIME_PERIOD );
return ( events ^ PCT_UPDATE_TIME_EVT );
}
// event to handle pct load control complete event
if ( events & PCT_LOAD_CTRL_EVT )
{
// pct load control evt completed
// Send response back
// DisableDefaultResponse is set to FALSE - it is recommended to turn on
// default response since Report Event Status Command does not have
// a response.
rsp.eventStatus = EVENT_STATUS_LOAD_CONTROL_EVENT_COMPLETED;
zclSE_LoadControl_Send_ReportEventStatus( PCT_ENDPOINT, &ESPAddr,
&rsp, FALSE, pctTransID );
HalLcdWriteString("PCT Evt Complete", HAL_LCD_LINE_3);
HalLedSet(HAL_LED_4, HAL_LED_MODE_OFF);
return ( events ^ PCT_LOAD_CTRL_EVT );
}
// Discard unknown events
return 0;
}
/*********************************************************************
* @fn MT_NwkCommandProcessing
*
* @brief
*
* Process all the NWK commands that are issued by test tool
*
* @param cmd_id - Command ID
* @param len - Length of received SPI data message
* @param pData - pointer to received SPI data message
*
* @return void
*/
void MT_NwkCommandProcessing( uint16 cmd_id , byte len , byte *pData )
{
byte ret;
#if defined ( MT_NWK_FUNC )
uint8 dummyExPANID[Z_EXTADDR_LEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
uint16 dstAddr;
#endif
#if defined ( MT_NWK_FUNC ) //NWK commands
byte attr;
byte index;
byte dataLen;
byte *dataPtr;
uint32 channelList;
byte databuf[SPI_RESP_LEN_NWK_DEFAULT + NWK_DEFAULT_GET_RESPONSE_LEN];
#if defined( ZDO_COORDINATOR )
uint16 panId;
#else
byte i,j;
#endif
#endif // MT_NWK_FUNC
len = SPI_0DATA_MSG_LEN + SPI_RESP_LEN_NWK_DEFAULT;
ret = (byte)ZSuccess;
switch (cmd_id)
{
#if defined( RTR_NWK )
case SPI_CMD_NLME_PERMIT_JOINING_REQ:
//The only information is PermitDuration
ret = (byte)NLME_PermitJoiningRequest( *pData );
break;
#endif
#if defined ( MT_NWK_FUNC ) //NWK commands
case SPI_CMD_NWK_INIT:
nwk_init( NWK_TaskID );
break;
case SPI_CMD_NLDE_DATA_REQ:
//First read the DstAddr
dstAddr = BUILD_UINT16( pData[1], pData[0] );
pData += sizeof( dstAddr );
//Get the NSDU details
dataLen = *pData++;
dataPtr = pData;
/* For now, skip a length of ZTEST_DEFAULT_DATA_LEN, instead of dataLen.
In future ZTOOL releases the data buffer will be only as long as dataLen */
//pData += dataLen;
pData += ZTEST_DEFAULT_DATA_LEN;
/* pData[0] = NSDUHandlde
pData[1] = NSDUHandleOptions
pData[3] = SecurityEnable
pData[4] = DiscoverRoute
pData[5] = RadiusCounter */
ret = (byte)MT_Nwk_DataRequest( dstAddr, dataLen, dataPtr, pData[0],
BUILD_UINT16( pData[2], pData[1] ),
pData[3], pData[4], pData[5]);
break;
#if defined( ZDO_COORDINATOR )
case SPI_CMD_NLME_INIT_COORD_REQ:
panId = BUILD_UINT16( pData[1], pData[0] );
MT_ReverseBytes( &pData[2], 4 );
channelList = osal_build_uint32( &pData[2], 4 );
ret = (byte)NLME_NetworkFormationRequest( panId, channelList, pData[6], pData[7],
pData[8], pData[9] );
break;
#endif // ZDO
#if defined( RTR_NWK )
case SPI_CMD_NLME_START_ROUTER_REQ:
// NOTE: first two parameters are not used, see NLMEDE.h for details
ret = (byte)NLME_StartRouterRequest( pData[0], pData[1], pData[2] );
break;
#endif // RTR
case SPI_CMD_NLME_JOIN_REQ:
ret = (byte)NLME_JoinRequest( dummyExPANID, BUILD_UINT16( pData[1], pData[0] ), pData[2], pData[3] );
if ( pData[3] & CAPINFO_RCVR_ON_IDLE )
{
// The receiver is on, turn network layer polling off.
NLME_SetPollRate( 0 );
NLME_SetQueuedPollRate( 0 );
NLME_SetResponseRate( 0 );
}
break;
case SPI_CMD_NLME_LEAVE_REQ:
{
NLME_LeaveReq_t req;
// if extAddr is all zeros, it means null pointer..
for( index = 0; ( ( index < Z_EXTADDR_LEN ) &&
( pData[index] == 0 ) ) ; index++ );
if ( index == Z_EXTADDR_LEN )
{
req.extAddr = NULL;
}
else
{
MT_ReverseBytes( pData, Z_EXTADDR_LEN );
req.extAddr = pData;
}
pData += Z_EXTADDR_LEN;
req.removeChildren = FALSE;
req.rejoin = FALSE;
req.silent = FALSE;
ret = (byte)NLME_LeaveReq( &req );
}
break;
case SPI_CMD_NLME_RESET_REQ:
//Its a direct call to reset NWK
ret = (byte)NLME_ResetRequest();
break;
case SPI_CMD_NLME_GET_REQ:
attr = *pData++;
index = *pData;
databuf[0] = (byte)NLME_GetRequest( (ZNwkAttributes_t )attr, index, &databuf[1] );
len = SPI_0DATA_MSG_LEN + SPI_RESP_LEN_NWK_DEFAULT + NWK_DEFAULT_GET_RESPONSE_LEN;
MT_BuildAndSendZToolResponse( len, (SPI_RESPONSE_BIT | SPI_CMD_NLME_GET_REQ),
(SPI_RESP_LEN_NWK_DEFAULT + NWK_DEFAULT_GET_RESPONSE_LEN), databuf );
return; // Don't return to this function
case SPI_CMD_NLME_SET_REQ:
ret = (byte)NLME_SetRequest( (ZNwkAttributes_t)pData[0], pData[1], &pData[2] );
osal_start_timerEx( ZDAppTaskID, ZDO_NWK_UPDATE_NV, 1000 );
break;
case SPI_CMD_NLME_NWK_DISC_REQ:
MT_ReverseBytes( pData, 4 );
ret = (byte)NLME_NetworkDiscoveryRequest( osal_build_uint32( pData, 4 ), pData[4] );
break;
#if !defined( ZDO_COORDINATOR )
case SPI_CMD_NLME_ORPHAN_JOIN_REQ:
// Channel list bit mask
MT_ReverseBytes( pData, 4 );
channelList = osal_build_uint32( pData, 4 );
// Count number of channels
j = attr = 0;
for ( i = 0; i < ED_SCAN_MAXCHANNELS; i++ )
{
if ( channelList & (1 << i) )
{
j++;
attr = i;
}
}
// If only one channel specified...
if ( j == 1 )
{
_NIB.scanDuration = pData[4];
_NIB.nwkLogicalChannel = attr;
_NIB.channelList = channelList;
if ( !_NIB.CapabilityInfo )
_NIB.CapabilityInfo = ZDO_Config_Node_Descriptor.CapabilityFlags;
devState = DEV_NWK_ORPHAN;
ret = (byte)NLME_OrphanJoinRequest( channelList, pData[4] );
}
else
ret = ZNwkInvalidParam;
break;
#endif // !ZDO
#if defined (RTR_NWK)
case SPI_CMD_NLME_ROUTE_DISC_REQ:
ret = (byte)NLME_RouteDiscoveryRequest( BUILD_UINT16( pData[1], pData[0] ), pData[2] );
break;
case SPI_CMD_NLME_DIRECT_JOIN_REQ:
MT_ReverseBytes( pData, 8 );
ret = (byte)NLME_DirectJoinRequest( pData, pData[8] );
break;
#endif // RTR
#endif // MT_NWK_FUNC
default:
ret = (byte)ZUnsupportedMode;
break;
}
#if defined ( MT_NWK_FUNC )
MT_SendSPIRespMsg( ret, cmd_id, len, SPI_RESP_LEN_NWK_DEFAULT );
#endif
(void)len;
(void)ret;
}
/*********************************************************************
* @fn ipd_event_loop
*
* @brief Event Loop Processor for ipd.
*
* @param uint8 task_id - ipd task id
* @param uint16 events - event bitmask
*
* @return none
*/
uint16 ipd_event_loop( uint8 task_id, uint16 events )
{
afIncomingMSGPacket_t *MSGpkt;
if ( events & SYS_EVENT_MSG )
{
while ( (MSGpkt = (afIncomingMSGPacket_t *)osal_msg_receive( ipdTaskID )) )
{
switch ( MSGpkt->hdr.event )
{
case ZCL_INCOMING_MSG:
// Incoming ZCL foundation command/response messages
ipd_ProcessZCLMsg( (zclIncomingMsg_t *)MSGpkt );
break;
case KEY_CHANGE:
ipd_HandleKeys( ((keyChange_t *)MSGpkt)->state, ((keyChange_t *)MSGpkt)->keys );
break;
case ZDO_STATE_CHANGE:
if (DEV_END_DEVICE == (devStates_t)(MSGpkt->hdr.status))
{
#if SECURE
{
// check to see if link key had already been established
linkKeyStatus = ipd_KeyEstablish_ReturnLinkKey(ESPAddr.addr.shortAddr);
if (linkKeyStatus != ZSuccess)
{
// send out key establishment request
osal_set_event( ipdTaskID, IPD_KEY_ESTABLISHMENT_REQUEST_EVT);
}
else
{
// link key already established, resume sending reports
osal_start_timerEx( ipdTaskID, IPD_GET_PRICING_INFO_EVT, IPD_GET_PRICING_INFO_PERIOD );
}
}
#else
{
osal_start_timerEx( ipdTaskID, IPD_GET_PRICING_INFO_EVT, IPD_GET_PRICING_INFO_PERIOD );
}
#endif
// Per smart energy spec end device polling requirement of not to poll < 7.5 seconds.
NLME_SetPollRate ( SE_DEVICE_POLL_RATE );
}
break;
#if defined( ZCL_KEY_ESTABLISH )
case ZCL_KEY_ESTABLISH_IND:
if ((MSGpkt->hdr.status) == TermKeyStatus_Success)
{
osal_start_timerEx( ipdTaskID, IPD_GET_PRICING_INFO_EVT, IPD_GET_PRICING_INFO_PERIOD );
}
break;
#endif
default:
break;
}
// Release the memory
osal_msg_deallocate( (uint8 *)MSGpkt );
}
// return unprocessed events
return (events ^ SYS_EVENT_MSG);
}
// event to intiate key establishment request
if ( events & IPD_KEY_ESTABLISHMENT_REQUEST_EVT )
{
zclGeneral_KeyEstablish_InitiateKeyEstablishment(ipdTaskID, &ESPAddr, ipdTransID);
return ( events ^ IPD_KEY_ESTABLISHMENT_REQUEST_EVT );
}
// event to get current price
if ( events & IPD_GET_PRICING_INFO_EVT )
{
zclSE_Pricing_Send_GetCurrentPrice( IPD_ENDPOINT, &ESPAddr, option, TRUE, 0 );
osal_start_timerEx( ipdTaskID, IPD_GET_PRICING_INFO_EVT, IPD_GET_PRICING_INFO_PERIOD );
return ( events ^ IPD_GET_PRICING_INFO_EVT );
}
// handle processing of identify timeout event triggered by an identify command
if ( events & IPD_IDENTIFY_TIMEOUT_EVT )
{
if ( ipdIdentifyTime > 0 )
{
ipdIdentifyTime--;
}
ipd_ProcessIdentifyTimeChange();
return ( events ^ IPD_IDENTIFY_TIMEOUT_EVT );
}
// event to get current time
if ( events & IPD_UPDATE_TIME_EVT )
{
ipdTime = osal_getClock();
osal_start_timerEx( ipdTaskID, IPD_UPDATE_TIME_EVT, IPD_UPDATE_TIME_PERIOD );
return ( events ^ IPD_UPDATE_TIME_EVT );
}
// Discard unknown events
return 0;
}
