/******************************************************
Required NDIS procedure
Allocates and initializes adapter context
Finally sets send and receive to Enabled state and reports connect
Returns:
NDIS_STATUS SUCCESS or some error code
*******************************************************/
static NDIS_STATUS ParaNdis5_Initialize(OUT PNDIS_STATUS OpenErrorStatus,
OUT PUINT SelectedMediumIndex,
IN PNDIS_MEDIUM MediumArray,
IN UINT MediumArraySize,
IN NDIS_HANDLE MiniportAdapterHandle,
IN NDIS_HANDLE WrapperConfigurationContext)
{
NDIS_STATUS status = NDIS_STATUS_UNSUPPORTED_MEDIA;
PARANDIS_ADAPTER *pContext = NULL;
UINT i;
for(i = 0; i < MediumArraySize; ++i)
{
if(MediumArray[i] == NdisMedium802_3)
{
*SelectedMediumIndex = i;
status = NDIS_STATUS_SUCCESS;
break;
}
}
if (status == NDIS_STATUS_SUCCESS)
{
pContext =
(PARANDIS_ADAPTER *)ParaNdis_AllocateMemory(NULL, sizeof(PARANDIS_ADAPTER));
if (!pContext)
{
status = NDIS_STATUS_RESOURCES;
}
}
if (status == NDIS_STATUS_SUCCESS)
{
PVOID pResourceList = &status;
UINT uSize = 0;
NdisZeroMemory(pContext, sizeof(PARANDIS_ADAPTER));
pContext->ulUniqueID = InterlockedIncrement(&gID);
pContext->DriverHandle = DriverHandle;
pContext->MiniportHandle = MiniportAdapterHandle;
pContext->WrapperConfigurationHandle = WrapperConfigurationContext;
NdisMQueryAdapterResources(&status, WrapperConfigurationContext, pResourceList, &uSize);
if (uSize > 0)
pResourceList = ParaNdis_AllocateMemory(MiniportAdapterHandle, uSize);
else
pResourceList = NULL;
if (!pResourceList)
status = uSize > 0 ? NDIS_STATUS_RESOURCES : NDIS_STATUS_FAILURE;
else
{
ULONG attributes;
attributes = NDIS_ATTRIBUTE_DESERIALIZE | NDIS_ATTRIBUTE_BUS_MASTER;
// in XP SP2, if this flag is NOT set, the NDIS halts miniport
// upon transition to S1..S4.
// it seems that XP SP3 ignores it and always sends SET_POWER to D3
#ifndef NO_XP_POWER_MANAGEMENT
attributes |= NDIS_ATTRIBUTE_NO_HALT_ON_SUSPEND;
#endif
#ifdef NDIS50_MINIPORT
//TODO: this is wrong, I think
// this API is for XP and
// it should be used only if you never need virtual addresses of sent buffers
// so I comment it out
//attributes |= NDIS_ATTRIBUTE_USES_SAFE_BUFFER_APIS;
#endif
NdisMSetAttributesEx(
MiniportAdapterHandle,
pContext,
0,
attributes,
NdisInterfacePci);
NdisMQueryAdapterResources(&status, WrapperConfigurationContext, pResourceList, &uSize);
status = ParaNdis_InitializeContext(pContext, (PNDIS_RESOURCE_LIST)pResourceList);
NdisFreeMemory(pResourceList, 0, 0);
}
}
if (status == NDIS_STATUS_SUCCESS)
{
status = ParaNdis_FinishInitialization(pContext);
if (status == NDIS_STATUS_SUCCESS)
{
#ifdef NDIS50_MINIPORT
NdisMRegisterAdapterShutdownHandler(
MiniportAdapterHandle,
pContext,
(ADAPTER_SHUTDOWN_HANDLER)ParaNdis5_Shutdown);
#endif //NDIS50_MINIPORT
ParaNdis_DebugRegisterMiniport(pContext, TRUE);
ParaNdis_IndicateConnect(pContext, FALSE, TRUE);
ParaNdis5_StopSend(pContext, FALSE, NULL);
ParaNdis5_StopReceive(pContext, FALSE, NULL);
if (!pContext->ulMilliesToConnect)
{
ParaNdis_ReportLinkStatus(pContext, FALSE);
}
else
{
NdisSetTimer(&pContext->ConnectTimer, pContext->ulMilliesToConnect);
}
}
else
{
ParaNdis_CleanupContext(pContext);
}
}
if (status != NDIS_STATUS_SUCCESS && pContext)
{
NdisFreeMemory(pContext, 0, 0);
}
DEBUG_EXIT_STATUS(0, status);
return status;
}
NDIS_STATUS NICInitializeAdapter(
IN PMP_ADAPTER Adapter,
IN NDIS_HANDLE WrapperConfigurationContext
)
/*++
Routine Description:
Query assigned resources and initialize the adapter.
Arguments:
Adapter Pointer to our adapter
Return Value:
NDIS_STATUS_SUCCESS
NDIS_STATUS_ADAPTER_NOT_FOUND
--*/
{
NDIS_STATUS Status = NDIS_STATUS_ADAPTER_NOT_FOUND;
typedef __declspec(align(MEMORY_ALLOCATION_ALIGNMENT)) NicResourceCharBuf;
NicResourceCharBuf resBuf[NIC_RESOURCE_BUF_SIZE];
PNDIS_RESOURCE_LIST resList = (PNDIS_RESOURCE_LIST)resBuf;
UINT bufSize = NIC_RESOURCE_BUF_SIZE;
PCM_PARTIAL_RESOURCE_DESCRIPTOR pResDesc;
ULONG index;
DEBUGP(MP_TRACE, ("---> InitializeAdapter\n"));
PAGED_CODE();
do
{
//
// Get the resources assigned by the PNP manager. NDIS gets
// these resources in IRP_MN_START_DEVICE request.
//
NdisMQueryAdapterResources(
&Status,
WrapperConfigurationContext,
resList,
&bufSize);
if (Status == NDIS_STATUS_SUCCESS)
{
#pragma prefast(suppress: 8199, "resList is initialized by NdisMQueryAdapterResources")
for (index=0; index < resList->Count; index++)
{
pResDesc = &resList->PartialDescriptors[index];
switch(pResDesc->Type)
{
case CmResourceTypePort:
DEBUGP(MP_INFO, ("IoBaseAddress = 0x%x\n",
NdisGetPhysicalAddressLow(pResDesc->u.Port.Start)));
DEBUGP(MP_INFO, ("IoRange = x%x\n",
pResDesc->u.Port.Length));
break;
case CmResourceTypeInterrupt:
DEBUGP(MP_INFO, ("InterruptLevel = x%x\n",
pResDesc->u.Interrupt.Level));
break;
case CmResourceTypeMemory:
DEBUGP(MP_INFO, ("MemPhysAddress(Low) = 0x%0x\n",
NdisGetPhysicalAddressLow(pResDesc->u.Memory.Start)));
DEBUGP(MP_INFO, ("MemPhysAddress(High) = 0x%0x\n",
NdisGetPhysicalAddressHigh(pResDesc->u.Memory.Start)));
break;
}
}
}
Status = NDIS_STATUS_SUCCESS;
//
// Map bus-relative IO range to system IO space using
// NdisMRegisterIoPortRange
//
//
// Map bus-relative registers to virtual system-space
// using NdisMMapIoSpace
//
//
// Disable interrupts here as soon as possible
//
//
// Register the interrupt using NdisMRegisterInterrupt
//
//
// Initialize the hardware with mapped resources
//
#ifdef NDIS50_MINIPORT
//
// Register a shutdown handler for NDIS50 or earlier miniports
// For NDIS51 miniports, set AdapterShutdownHandler.
//
NdisMRegisterAdapterShutdownHandler(
Adapter->AdapterHandle,
(PVOID) Adapter,
(ADAPTER_SHUTDOWN_HANDLER) MPShutdown);
#endif
//
// Enable the interrupt
//
} while (FALSE);
DEBUGP(MP_TRACE, ("<--- InitializeAdapter, Status=%x\n", Status));
return Status;
}
/*************************************************************************
* SteMiniportinitialize()
*
* NDIS エントリポイント
* ネットワーク I/O 操作のために NIC ドライバがネットワーク I/O 操作を
* するために必要なリソースを確保する。
*
* 引数:
*
* OpenErrorStatus OUT PNDIS_STATUS
* SelectedMediumIndex OUT PUINT
* MediumArray IN PNDIS_MEDIUM
* MediumArraySize IN UINT
* MiniportAdapterHandle IN NDIS_HANDLE
* WrapperConfigurationContext IN NDIS_HANDLE
*
* 返り値:
*
* 正常時: NDIS_STATUS_SUCCESS
*
*************************************************************************/
NDIS_STATUS
SteMiniportInitialize(
OUT PNDIS_STATUS OpenErrorStatus,
OUT PUINT SelectedMediumIndex,
IN PNDIS_MEDIUM MediumArray,
IN UINT MediumArraySize,
IN NDIS_HANDLE MiniportAdapterHandle,
IN NDIS_HANDLE WrapperConfigurationContext
)
{
UINT i;
NDIS_STATUS Status = NDIS_STATUS_SUCCESS;
STE_ADAPTER *Adapter = NULL;
BOOLEAN MediaFound = FALSE;
DEBUG_PRINT0(3, "SteMiniportInitialize called\n");
*SelectedMediumIndex = 0;
for ( i = 0 ; i < MediumArraySize ; i++){
if (MediumArray[i] == NdisMedium802_3){
*SelectedMediumIndex = i;
MediaFound = TRUE;
break;
}
}
// 途中で break するためだけの Do-While 文
do {
if(!MediaFound){
// 上記の for 文で見つけられなかったようだ
DEBUG_PRINT0(1, "SteMiniportInitialize: No Media much\n");
Status = NDIS_STATUS_UNSUPPORTED_MEDIA;
break;
}
//
// Adapter を確保し、初期化する
//
if ((Status = SteCreateAdapter(&Adapter)) != NDIS_STATUS_SUCCESS){
DEBUG_PRINT0(1, "SteMiniportInitialize: Can't allocate memory for STE_ADAPTER\n");
Status = NDIS_STATUS_RESOURCES;
break;
}
DEBUG_PRINT1(3, "SteMiniportInitialize: Adapter = 0x%p\n", Adapter);
Adapter->MiniportAdapterHandle = MiniportAdapterHandle;
//
// Registory を読む処理。...省略。
// NdisOpenConfiguration();
// NdisReadConfiguration();
//
// NIC のためのハードウェアリソースのリストを得る。...省略。
// NdisMQueryAdapterResources()
//
//
// NDIS に NIC の情報を伝える。
// かならず NdisXxx 関数を呼び出すより前に、以下の NdisMSetAttributesEx
// を呼び出さなければならない。
//
NdisMSetAttributesEx(
MiniportAdapterHandle, //IN NDIS_HANDLE
(NDIS_HANDLE) Adapter, //IN NDIS_HANDLE
0, //IN UINT
NDIS_ATTRIBUTE_DESERIALIZE, //IN ULONG Deserialized ミニポートドライバ
NdisInterfaceInternal //IN NDIS_INTERFACE_TYPE
);
//
// NDIS 5.0 の場合はかならず SHUTDOWN_HANDLER を登録しなければならない。
//
NdisMRegisterAdapterShutdownHandler(
MiniportAdapterHandle, // IN NDIS_HANDLE
(PVOID) Adapter, // IN PVOID
(ADAPTER_SHUTDOWN_HANDLER) SteMiniportShutdown // IN ADAPTER_SHUTDOWN_HANDLER
);
//
// 仮想 NIC デーモンからの IOCT/ReadFile/WriteFile 用の
// デバイスを作成し、Dispatch ルーチンを登録する。
//
SteRegisterDevice(Adapter);
//
// SteRecvTimerFunc() を呼ぶためのタイマーオブジェクトを初期化
//
NdisInitializeTimer(
&Adapter->RecvTimer, //IN OUT PNDIS_TIMER
SteRecvTimerFunc, //IN PNDIS_TIMER_FUNCTION
(PVOID)Adapter //IN PVOID
);
//
// SteResetTimerFunc() を呼ぶためのタイマーオブジェクトを初期化
//
NdisInitializeTimer(
&Adapter->ResetTimer, //IN OUT PNDIS_TIMER
SteResetTimerFunc, //IN PNDIS_TIMER_FUNCTION
(PVOID)Adapter //IN PVOID
);
} while (FALSE);
return(Status);
}
