/**
* Decrypts and interprets received codes
*/
void Remote(void)
{
// a frame was received and is stored in the receive buffer
// move it to decryption Buffer, and restart receiving again
// Copy the received data to the work buffer
memcpy(Buffer, RX_Buffer, sizeof(RX_Buffer));
#ifdef DBG
int i;
Serial.print("DATA ");
for(i = 0; i<sizeof(RX_Buffer); i++)
{
Serial.print(Buffer[i], HEX);
Serial.print(" ");
}
Serial.println("");
#endif
switch (RFtype)
{
case KEELOQ_PACKET: // Standard Keeloq frame detected
NormalKeyGen(); // Compute the decryption key
Decrypt(); // Decrypt the hopping code portion
// Validate received packet (aka, is it a paired device?)
if (Find(RFtype) == FALSE)
{ // Transmitter is not paired. Are we in learn mode?
if (FLearn)
{ // look for new space to store record
if (!Insert())
{ // fail if no memory available
#ifdef DBG
Serial.println("INSERT CODE FAIL");
#endif
break;
}
else
{
#ifdef DBG
Serial.println("Paired");
#endif
if(keeloq_callback)
{
tmpSN.c[0] = SEED[0];
tmpSN.c[1] = SEED[1];
tmpSN.c[2] = SEED[2];
tmpSN.c[3] = Buffer[3] & 0xF;
keeloq_callback(KMSG_NEWPAIR, tmpSN.num, 0);
}
// ASSERT Ind is pointing to a valid memory location
IDWrite(); // write Serial Number in memory
FHopOK = TRUE; // enable updating Hopping Code
HopUpdate(); // Write Hoping code in memory
CFlash = 10; // request Led flashing to indicate successful learning
CTFlash = TFLASH; // load period timer
// LED1 = TRUE; // start with Led on
FLearn = FALSE; // terminate successfully Learn
CTLearn = 0;
}
}
else // not in learning mode
{
#ifdef DBG
Serial.println("Not learned");
#endif
}
}
else if (DecCHK() == FALSE)
{ //Transmitter is paired, but message is not valid
#ifdef DBG
Serial.println("Not valid KLQ");
#endif
}
else
{ // Transmitter is already paired
// Check Hopping Code integrity; are we within the acceptable window?
if (!HopCHK())
{
#ifdef DBG
Serial.println("Hop check fail");
#endif
break;
}
// Visual status confirmation of success
digitalWrite(PIN_LED_RED, LOW);
COut = TOUT; // Init LED output timer
/// Callback
// hopping code incrementing properly
HopUpdate(); // update memory
if(keeloq_callback)
{
tmpSN.c[0] = SEED[0];
tmpSN.c[1] = SEED[1];
tmpSN.c[2] = SEED[2];
tmpSN.c[3] = Buffer[3] & 0xF;
keeloq_callback(KMSG_BTN, tmpSN.num, Buffer[3] >> 4);
}
#ifdef DBG
if (((Buffer[7] ^ FCode) & 0xf0) == 0) // check against learned function code
{
Serial.println("check against");
}
// tone(38, 3000, 400);
sprintf(buffer7, "KLQ: %01X%02X%02X%02X", SEED[3], SEED[2], SEED[1], SEED[0]);
Serial.println((char*)buffer7);
sprintf(buffer7, "C:%01X%02X%02X%02X F:%1X", Buffer[3] & 0xF, Buffer[2], Buffer[1], Buffer[0], Buffer[3] >> 4);
Serial.println((char*)buffer7);
#endif
}
break;
default:
#ifdef DBG
Serial.println("AES/XTEA not supported");
#endif
break;
}
// Ready to receive a new frame
RFFull = FALSE;
} // remote
//
// Remote Routine
//
// Decrypts and interprets receive codes
// Does Normal Operation and Learn Mode
//
// INPUT: Buffer contains the received code word
//
// OUTPUT: S0..S3 and LearnOut
//
void Remote()
{
// a frame was received and is stored in the receive buffer
// move it to decryption Buffer, and restart receiving
memcpy( Buffer, B, 9);
RFFull = FALSE; // ready to receive a new frame
// decoding
NormalKeyGen(); // compute the decryption key
Decrypt(); // decrypt the hopping code portion
if ( DecCHK() == FALSE) // decription failed
return;
if ( FLearn)
{
// Learn Mode
if ( Find()== FALSE)
// could not find the Serial Number in memory
{
if ( !Insert()) // look for new space
return; // fail if no memory available
}
// ASSERT Ind is pointing to a valid memory location
IDWrite(); // write Serial Number in memory
FHopOK = TRUE; // enable updating Hopping Code
HopUpdate(); // Write Hoping code in memory
CFlash = 32; // request Led flashing
CTFlash = TFLASH; // load period timer
Led = TRUE; // start with Led on
FLearn = FALSE; // terminate successfully Learn
} // Learn
else // Normal Mode of operation
{
if ( Find()== FALSE)
return;
if ( !HopCHK()) // check Hopping code integrity
return;
if ( FSame) // identified same code as last memorized
{
if ( COut >0) // if output is still active
COut = TOUT; // reload timer to keep active
else
return; // else discard
}
else // hopping code incrementing properly
{
HopUpdate(); // update memory
// set outputs according to function code
if ( BIT_TEST(Buffer[3],S0))
Out0 = ON;
if ( BIT_TEST(Buffer[3],S1))
Out1 = ON;
if ( BIT_TEST(Buffer[3],S2))
Out2 = ON;
if ( BIT_TEST(Buffer[3],S3))
Out3 = ON;
// set low battery flag if necessary
if ( BIT_TEST(Buffer[8],VFlag))
Vlow = ON;
// check against learned function code
if ( (( Buffer[7] ^ FCode) & 0xf0) == 0)
Led = ON;
// init output timer
COut = TOUT;
}// recognized
} // normal mode
} // remote