static void
ofw_cnprobe(struct consdev *cp)
{
int chosen;
if ((chosen = OF_finddevice("/chosen")) == -1) {
cp->cn_pri = CN_DEAD;
return;
}
if (OF_getencprop(chosen, "stdin", &stdin, sizeof(stdin)) == -1) {
cp->cn_pri = CN_DEAD;
return;
}
if (OF_getencprop(chosen, "stdout", &stdout, sizeof(stdout)) == -1) {
cp->cn_pri = CN_DEAD;
return;
}
cp->cn_pri = CN_LOW;
}
static void
fsl_ocotp_devmap(void)
{
phandle_t child, root;
u_long base, size;
if ((root = OF_finddevice("/")) == 0)
goto fatal;
if ((child = fdt_depth_search_compatible(root, "fsl,imx6q-ocotp", 0)) == 0)
goto fatal;
if (fdt_regsize(child, &base, &size) != 0)
goto fatal;
ocotp_size = (vm_size_t)size;
if ((ocotp_regs = pmap_mapdev((vm_offset_t)base, ocotp_size)) == NULL)
goto fatal;
return;
fatal:
panic("cannot find/map the ocotp registers");
}
/*
* Get the package handle of the UART that is selected as the keyboard port,
* if it's actually used to connect the keyboard according to the OF. I.e.
* this will return the UART used to connect the keyboard regardless whether
* it's stdin or not, however not in case the user or the OF gave preference
* to e.g. a PS/2 keyboard by setting /aliases/keyboard accordingly.
*/
static phandle_t
uart_cpu_getdev_keyboard(char *dev, size_t devsz)
{
char buf[sizeof("serial")];
phandle_t input;
if ((input = OF_finddevice("keyboard")) == -1)
return (-1);
if (OF_getprop(input, "device_type", buf, sizeof(buf)) == -1)
return (-1);
if (strcmp(buf, "serial") != 0)
return (-1);
if (OF_getprop(input, "name", dev, devsz) == -1)
return (-1);
/*
* So far this also matched PS/2 keyboard nodes so make sure it's
* one of the SCCs/UARTs known to be used to connect keyboards.
*/
if (strcmp(dev, "su") && strcmp(dev, "su_pnp") && strcmp(dev, "zs"))
return (-1);
return (input);
}
void
OF_getetheraddr(device_t dev, u_char *addr)
{
char buf[sizeof("true")];
phandle_t node;
struct idprom idp;
if ((node = OF_finddevice("/options")) > 0 &&
OF_getprop(node, "local-mac-address?", buf, sizeof(buf)) > 0) {
buf[sizeof(buf) - 1] = '\0';
if (strcmp(buf, "true") == 0 &&
(node = ofw_bus_get_node(dev)) > 0 &&
OF_getprop(node, "local-mac-address", addr,
ETHER_ADDR_LEN) == ETHER_ADDR_LEN)
return;
}
node = OF_peer(0);
if (node <= 0 || OF_getprop(node, "idprom", &idp, sizeof(idp)) == -1)
panic("Could not determine the machine Ethernet address");
bcopy(&idp.id_ether, addr, ETHER_ADDR_LEN);
}
static int
openpic_ofw_probe(device_t dev)
{
const char *type = ofw_bus_get_type(dev);
if (type == NULL)
return (ENXIO);
if (!ofw_bus_is_compatible(dev, "chrp,open-pic") &&
strcmp(type, "open-pic") != 0)
return (ENXIO);
/*
* On some U4 systems, there is a phantom MPIC in the mac-io cell.
* The uninorth driver will pick up the real PIC, so ignore it here.
*/
if (OF_finddevice("/u4") != (phandle_t)-1)
return (ENXIO);
device_set_desc(dev, OPENPIC_DEVSTR);
return (0);
}
static int
powermac_smp_first_cpu(platform_t plat, struct cpuref *cpuref)
{
char buf[8];
phandle_t cpu, dev, root;
int res;
root = OF_peer(0);
dev = OF_child(root);
while (dev != 0) {
res = OF_getprop(dev, "name", buf, sizeof(buf));
if (res > 0 && strcmp(buf, "cpus") == 0)
break;
dev = OF_peer(dev);
}
if (dev == 0) {
/*
* psim doesn't have a name property on the /cpus node,
* but it can be found directly
*/
dev = OF_finddevice("/cpus");
if (dev == -1)
return (ENOENT);
}
cpu = OF_child(dev);
while (cpu != 0) {
res = OF_getprop(cpu, "device_type", buf, sizeof(buf));
if (res > 0 && strcmp(buf, "cpu") == 0)
break;
cpu = OF_peer(cpu);
}
if (cpu == 0)
return (ENOENT);
return (powermac_smp_fill_cpuref(cpuref, cpu));
}
static int
copy_rom_font()
{
u_char *romfont;
int char_width, char_height;
int chosen, mmu, m, e;
/* Get ROM FONT address. */
OF_interpret("font-adr", 0, 1, &romfont);
if (romfont == NULL)
return -1;
chosen = OF_finddevice("/chosen");
OF_getprop(chosen, "mmu", &mmu, 4);
/*
* Convert to physcal address. We cannot access to Open Firmware's
* virtual address space.
*/
OF_call_method("translate", mmu, 1, 3, romfont, &romfont, &m, &e);
/* Get character size */
OF_interpret("char-width", 0, 1, &char_width);
OF_interpret("char-height", 0, 1, &char_height);
openfirm6x11.name = "Open Firmware";
openfirm6x11.firstchar = 32;
openfirm6x11.numchars = 96;
openfirm6x11.encoding = WSDISPLAY_FONTENC_ISO;
openfirm6x11.fontwidth = char_width;
openfirm6x11.fontheight = char_height;
openfirm6x11.stride = 1;
openfirm6x11.bitorder = WSDISPLAY_FONTORDER_L2R;
openfirm6x11.byteorder = WSDISPLAY_FONTORDER_L2R;
openfirm6x11.data = romfont;
return 0;
}
static void
uart_phyp_cnprobe(struct consdev *cp)
{
char buf[64];
ihandle_t stdout;
phandle_t input, chosen;
static struct uart_phyp_softc sc;
if ((chosen = OF_finddevice("/chosen")) == -1)
goto fail;
/* Check if OF has an active stdin/stdout */
input = -1;
if (OF_getprop(chosen, "stdout", &stdout,
sizeof(stdout)) == sizeof(stdout) && stdout != 0)
input = OF_instance_to_package(stdout);
if (input == -1)
goto fail;
if (OF_getprop(input, "device_type", buf, sizeof(buf)) == -1)
goto fail;
if (strcmp(buf, "serial") != 0)
goto fail;
sc.node = input;
if (uart_phyp_probe_node(&sc) != 0)
goto fail;
mtx_init(&sc.sc_mtx, "uart_phyp", NULL, MTX_SPIN | MTX_QUIET |
MTX_NOWITNESS);
cp->cn_pri = CN_NORMAL;
console_sc = ≻
return;
fail:
cp->cn_pri = CN_DEAD;
return;
}
static void
aml8726_fixup_busfreq(void)
{
phandle_t node;
pcell_t freq, prop;
ssize_t len;
/*
* Set the bus-frequency for the SoC simple-bus if it
* needs updating (meaning the current frequency is zero).
*/
if ((freq = aml8726_clkmsr_bus_frequency()) == 0 ||
(node = OF_finddevice("/soc")) == 0 ||
fdt_is_compatible_strict(node, "simple-bus") == 0)
while (1);
freq = cpu_to_fdt32(freq);
len = OF_getencprop(node, "bus-frequency", &prop, sizeof(prop));
if ((len / sizeof(prop)) == 1 && prop == 0)
OF_setprop(node, "bus-frequency", (void *)&freq, sizeof(freq));
}
void *
ofw_alloc_heap(unsigned int size)
{
phandle_t memoryp, root;
cell_t available[4];
cell_t acells;
root = OF_finddevice("/");
acells = 1;
OF_getprop(root, "#address-cells", &acells, sizeof(acells));
memoryp = OF_instance_to_package(memory);
OF_getprop(memoryp, "available", available, sizeof(available));
heap_base = OF_claim((void *)available[acells-1], size,
sizeof(register_t));
if (heap_base != (void *)-1) {
heap_size = size;
}
return (heap_base);
}
static void
ofw_cons_probe(struct consdev *cp)
{
int chosen;
if ((chosen = OF_finddevice("/chosen")) == -1) {
cp->cn_pri = CN_DEAD;
return;
}
if (OF_getprop(chosen, "stdin", &stdin, sizeof(stdin)) == -1) {
cp->cn_pri = CN_DEAD;
return;
}
if (OF_getprop(chosen, "stdout", &stdout, sizeof(stdout)) == -1) {
cp->cn_pri = CN_DEAD;
return;
}
cp->cn_dev = NULL;
cp->cn_pri = CN_INTERNAL;
}
int
main()
{
int chosen;
/*
* Get the boot arguments from Openfirmware
*/
if ((chosen = OF_finddevice("/chosen")) == -1 ||
OF_getprop(chosen, "bootpath", bootdev, sizeof bootdev) < 0 ||
OF_getprop(chosen, "bootargs", bootline, sizeof bootline) < 0) {
printf("Invalid Openfirmware environment\n");
exit();
}
prom2boot(bootdev);
get_alt_bootdev(bootdev, sizeof(bootdev), bootline, sizeof(bootline));
if (bootline[0] != '\0')
kernelfile = bootline;
OF_claim((void *)0x00100000, CLAIM_LIMIT, 0); /* XXX */
boot(0);
return 0;
}
static void
cn_drvinit(void *unused)
{
phandle_t options;
char output[32];
struct tty *tp;
if (ofw_consdev.cn_pri != CN_DEAD &&
ofw_consdev.cn_name[0] != '\0') {
tp = tty_alloc(&ofw_ttydevsw, NULL);
tty_makedev(tp, NULL, "%s", "ofwcons");
/*
* XXX: This is a hack and it may result in two /dev/ttya
* XXX: devices on platforms where the sab driver works.
*/
if ((options = OF_finddevice("/options")) == -1 ||
OF_getprop(options, "output-device", output,
sizeof(output)) == -1)
return;
if (strlen(output) > 0)
tty_makealias(tp, output);
}
}
static int
l3remap(struct rstmgr_softc *sc, int remap, int enable)
{
uint32_t addr, paddr;
bus_addr_t vaddr;
phandle_t node;
int reg;
/*
* Control whether bridge is visible to L3 masters or not.
* Register is write-only.
*/
reg = REMAP_MPUZERO;
if (enable)
reg |= (remap);
else
reg &= ~(remap);
node = OF_finddevice("l3regs");
if (node == -1) {
device_printf(sc->dev, "Can't find l3regs node\n");
return (1);
}
if ((OF_getprop(node, "reg", &paddr, sizeof(paddr))) > 0) {
addr = fdt32_to_cpu(paddr);
if (bus_space_map(fdtbus_bs_tag, addr, 0x4, 0, &vaddr) == 0) {
bus_space_write_4(fdtbus_bs_tag, vaddr,
L3REGS_REMAP, reg);
return (0);
}
}
return (1);
}
void
cpu_reset(void)
{
uint32_t paddr;
bus_addr_t vaddr;
phandle_t node;
if (rstmgr_warmreset() == 0)
goto end;
node = OF_finddevice("rstmgr");
if (node == -1)
goto end;
if ((OF_getencprop(node, "reg", &paddr, sizeof(paddr))) > 0) {
if (bus_space_map(fdtbus_bs_tag, paddr, 0x8, 0, &vaddr) == 0) {
bus_space_write_4(fdtbus_bs_tag, vaddr,
RSTMGR_CTRL, CTRL_SWWARMRSTREQ);
}
}
end:
while (1);
}
static void
pmu_attach(device_t parent, device_t self, void *aux)
{
struct confargs *ca = aux;
struct pmu_softc *sc = device_private(self);
#if notyet
struct i2cbus_attach_args iba;
#endif
uint32_t regs[16];
int irq = ca->ca_intr[0];
int node, extint_node, root_node;
int nbat = 1, i, pmnode;
int type = IST_EDGE;
uint8_t cmd[2] = {2, 0};
uint8_t resp[16];
char name[256];
extint_node = of_getnode_byname(OF_parent(ca->ca_node), "extint-gpio1");
if (extint_node) {
OF_getprop(extint_node, "interrupts", &irq, 4);
type = IST_LEVEL;
}
aprint_normal(" irq %d: ", irq);
sc->sc_dev = self;
sc->sc_node = ca->ca_node;
sc->sc_memt = ca->ca_tag;
root_node = OF_finddevice("/");
sc->sc_error = 0;
sc->sc_autopoll = 0;
sc->sc_pending_eject = 0;
sc->sc_brightness = sc->sc_brightness_wanted = 0x80;
sc->sc_volume = sc->sc_volume_wanted = 0x80;
sc->sc_flags = 0;
sc->sc_callback = NULL;
sc->sc_lid_closed = 0;
if (bus_space_map(sc->sc_memt, ca->ca_reg[0] + ca->ca_baseaddr,
ca->ca_reg[1], 0, &sc->sc_memh) != 0) {
aprint_error_dev(self, "unable to map registers\n");
return;
}
sc->sc_ih = intr_establish(irq, type, IPL_TTY, pmu_intr, sc);
pmu_init(sc);
sc->sc_pmu_ops.cookie = sc;
sc->sc_pmu_ops.do_command = pmu_send;
sc->sc_pmu_ops.register_callback = pmu_register_callback;
if (pmu0 == NULL)
pmu0 = sc;
pmu_send(sc, PMU_SYSTEM_READY, 1, cmd, 16, resp);
/* check what kind of PMU we're talking to */
if (pmu_send(sc, PMU_GET_VERSION, 0, cmd, 16, resp) > 1)
aprint_normal(" rev. %d", resp[1]);
aprint_normal("\n");
node = OF_child(sc->sc_node);
while (node != 0) {
if (OF_getprop(node, "name", name, 256) == 0)
goto next;
if (strncmp(name, "pmu-i2c", 8) == 0) {
aprint_normal_dev(self, "initializing IIC bus\n");
goto next;
}
if (strncmp(name, "adb", 4) == 0) {
aprint_normal_dev(self, "initializing ADB\n");
sc->sc_adbops.cookie = sc;
sc->sc_adbops.send = pmu_adb_send;
sc->sc_adbops.poll = pmu_adb_poll;
sc->sc_adbops.autopoll = pmu_autopoll;
sc->sc_adbops.set_handler = pmu_adb_set_handler;
#if NNADB > 0
config_found_ia(self, "adb_bus", &sc->sc_adbops,
nadb_print);
#endif
goto next;
}
if (strncmp(name, "rtc", 4) == 0) {
aprint_normal_dev(self, "initializing RTC\n");
sc->sc_todr.todr_gettime = pmu_todr_get;
sc->sc_todr.todr_settime = pmu_todr_set;
sc->sc_todr.cookie = sc;
todr_attach(&sc->sc_todr);
goto next;
}
if (strncmp(name, "battery", 8) == 0)
goto next;
aprint_normal_dev(self, "%s not configured\n", name);
next:
node = OF_peer(node);
}
if (OF_finddevice("/bandit/ohare") != -1) {
aprint_normal_dev(self, "enabling ohare backlight control\n");
sc->sc_flags |= PMU_HAS_BACKLIGHT_CONTROL;
cmd[0] = 0;
cmd[1] = 0;
memset(resp, 0, 6);
if (pmu_send(sc, PMU_READ_BRIGHTNESS, 1, cmd, 16, resp) > 1) {
sc->sc_brightness_wanted = resp[1];
pmu_update_brightness(sc);
}
}
/* attach batteries */
if (of_compatible(root_node, has_legacy_battery) != -1) {
pmu_attach_legacy_battery(sc);
} else if (of_compatible(root_node, has_two_smart_batteries) != -1) {
pmu_attach_smart_battery(sc, 0);
pmu_attach_smart_battery(sc, 1);
} else {
/* check how many batteries we have */
pmnode = of_getnode_byname(ca->ca_node, "power-mgt");
if (pmnode == -1)
goto bat_done;
if (OF_getprop(pmnode, "prim-info", regs, sizeof(regs)) < 24)
goto bat_done;
nbat = regs[6] >> 16;
for (i = 0; i < nbat; i++)
pmu_attach_smart_battery(sc, i);
}
bat_done:
#if notyet
memset(&iba, 0, sizeof(iba));
iba.iba_tag = &sc->sc_i2c;
sc->sc_i2c.ic_cookie = sc;
sc->sc_i2c.ic_acquire_bus = pmu_i2c_acquire_bus;
sc->sc_i2c.ic_release_bus = pmu_i2c_release_bus;
sc->sc_i2c.ic_send_start = NULL;
sc->sc_i2c.ic_send_stop = NULL;
sc->sc_i2c.ic_initiate_xfer = NULL;
sc->sc_i2c.ic_read_byte = NULL;
sc->sc_i2c.ic_write_byte = NULL;
sc->sc_i2c.ic_exec = pmu_i2c_exec;
config_found_ia(sc->sc_dev, "i2cbus", &iba, iicbus_print);
#endif
if (kthread_create(PRI_NONE, 0, NULL, pmu_thread, sc, &sc->sc_thread,
"%s", "pmu") != 0) {
aprint_error_dev(self, "unable to create event kthread\n");
}
sc->sc_lidswitch.smpsw_name = "Lid switch";
sc->sc_lidswitch.smpsw_type = PSWITCH_TYPE_LID;
if (sysmon_pswitch_register(&sc->sc_lidswitch) != 0)
aprint_error_dev(self,
"unable to register lid switch with sysmon\n");
}
static int
fdtbus_attach(device_t dev)
{
phandle_t root;
phandle_t child;
struct fdtbus_softc *sc;
u_long start, end;
int error;
if ((root = OF_finddevice("/")) == -1)
panic("fdtbus_attach: no root node.");
sc = device_get_softc(dev);
/*
* IRQ rman.
*/
start = 0;
end = ~0;
sc->sc_irq.rm_start = start;
sc->sc_irq.rm_end = end;
sc->sc_irq.rm_type = RMAN_ARRAY;
sc->sc_irq.rm_descr = "Interrupt request lines";
if ((error = rman_init(&sc->sc_irq)) != 0) {
device_printf(dev, "could not init IRQ rman, error = %d\n",
error);
return (error);
}
if ((error = rman_manage_region(&sc->sc_irq, start, end)) != 0) {
device_printf(dev, "could not manage IRQ region, error = %d\n",
error);
return (error);
}
/*
* Mem-mapped I/O space rman.
*/
start = 0;
end = ~0ul;
sc->sc_mem.rm_start = start;
sc->sc_mem.rm_end = end;
sc->sc_mem.rm_type = RMAN_ARRAY;
sc->sc_mem.rm_descr = "I/O memory";
if ((error = rman_init(&sc->sc_mem)) != 0) {
device_printf(dev, "could not init I/O mem rman, error = %d\n",
error);
return (error);
}
if ((error = rman_manage_region(&sc->sc_mem, start, end)) != 0) {
device_printf(dev, "could not manage I/O mem region, "
"error = %d\n", error);
return (error);
}
/*
* Walk the FDT root node and add top-level devices as our children.
*/
for (child = OF_child(root); child != 0; child = OF_peer(child)) {
/* Check and process 'status' property. */
if (!(fdt_is_enabled(child)))
continue;
newbus_device_from_fdt_node(dev, child);
}
return (bus_generic_attach(dev));
}
/* the backdoor to the keyboard controller! XXX */
int
atkbdc_configure(void)
{
bus_space_tag_t tag;
bus_space_handle_t h0;
bus_space_handle_t h1;
#if defined(__i386__) || defined(__amd64__)
volatile int i;
register_t flags;
#endif
#ifdef __sparc64__
char name[32];
phandle_t chosen, node;
ihandle_t stdin;
bus_addr_t port0;
bus_addr_t port1;
int space;
#else
int port0;
int port1;
#endif
/* XXX: tag should be passed from the caller */
#if defined(__amd64__) || defined(__i386__)
tag = X86_BUS_SPACE_IO;
#elif defined(__sparc64__)
tag = &atkbdc_bst_store[0];
#else
#error "define tag!"
#endif
#ifdef __sparc64__
if ((chosen = OF_finddevice("/chosen")) == -1)
return 0;
if (OF_getprop(chosen, "stdin", &stdin, sizeof(stdin)) == -1)
return 0;
if ((node = OF_instance_to_package(stdin)) == -1)
return 0;
if (OF_getprop(node, "name", name, sizeof(name)) == -1)
return 0;
name[sizeof(name) - 1] = '\0';
if (strcmp(name, "kb_ps2") != 0)
return 0;
/*
* The stdin handle points to an instance of a PS/2 keyboard
* package but we want the 8042 controller, which is the parent
* of that keyboard node.
*/
if ((node = OF_parent(node)) == 0)
return 0;
if (OF_decode_addr(node, 0, &space, &port0) != 0)
return 0;
h0 = sparc64_fake_bustag(space, port0, tag);
bus_space_subregion(tag, h0, KBD_DATA_PORT, 1, &h0);
if (OF_decode_addr(node, 1, &space, &port1) != 0)
return 0;
h1 = sparc64_fake_bustag(space, port1, tag);
bus_space_subregion(tag, h1, KBD_STATUS_PORT, 1, &h1);
#else
port0 = IO_KBD;
resource_int_value("atkbdc", 0, "port", &port0);
port1 = IO_KBD + KBD_STATUS_PORT;
#ifdef notyet
bus_space_map(tag, port0, IO_KBDSIZE, 0, &h0);
bus_space_map(tag, port1, IO_KBDSIZE, 0, &h1);
#else
h0 = (bus_space_handle_t)port0;
h1 = (bus_space_handle_t)port1;
#endif
#endif
#if defined(__i386__) || defined(__amd64__)
/*
* Check if we really have AT keyboard controller. Poll status
* register until we get "all clear" indication. If no such
* indication comes, it probably means that there is no AT
* keyboard controller present. Give up in such case. Check relies
* on the fact that reading from non-existing in/out port returns
* 0xff on i386. May or may not be true on other platforms.
*/
flags = intr_disable();
for (i = 0; i != 65535; i++) {
if ((bus_space_read_1(tag, h1, 0) & 0x2) == 0)
break;
}
intr_restore(flags);
if (i == 65535)
return ENXIO;
#endif
return atkbdc_setup(atkbdc_softc[0], tag, h0, h1);
}
int
main(int (*openfirm)(void *))
{
char bootpath[64];
struct devsw **dp;
phandle_t chosenh;
/*
* Tell the OpenFirmware functions where they find the ofw gate.
*/
OF_init(openfirm);
archsw.arch_getdev = ofw_getdev;
archsw.arch_copyin = sparc64_copyin;
archsw.arch_copyout = ofw_copyout;
archsw.arch_readin = sparc64_readin;
archsw.arch_autoload = sparc64_autoload;
init_heap();
setheap((void *)heapva, (void *)(heapva + HEAPSZ));
/*
* Probe for a console.
*/
cons_probe();
tlb_init();
bcache_init(32, 512);
/*
* Initialize devices.
*/
for (dp = devsw; *dp != 0; dp++) {
if ((*dp)->dv_init != 0)
(*dp)->dv_init();
}
/*
* Set up the current device.
*/
chosenh = OF_finddevice("/chosen");
OF_getprop(chosenh, "bootpath", bootpath, sizeof(bootpath));
/*
* Sun compatible bootable CD-ROMs have a disk label placed
* before the cd9660 data, with the actual filesystem being
* in the first partition, while the other partitions contain
* pseudo disk labels with embedded boot blocks for different
* architectures, which may be followed by UFS filesystems.
* The firmware will set the boot path to the partition it
* boots from ('f' in the sun4u case), but we want the kernel
* to be loaded from the cd9660 fs ('a'), so the boot path
* needs to be altered.
*/
if (bootpath[strlen(bootpath) - 2] == ':' &&
bootpath[strlen(bootpath) - 1] == 'f') {
bootpath[strlen(bootpath) - 1] = 'a';
printf("Boot path set to %s\n", bootpath);
}
env_setenv("currdev", EV_VOLATILE, bootpath,
ofw_setcurrdev, env_nounset);
env_setenv("loaddev", EV_VOLATILE, bootpath,
env_noset, env_nounset);
printf("\n");
printf("%s, Revision %s\n", bootprog_name, bootprog_rev);
printf("(%s, %s)\n", bootprog_maker, bootprog_date);
printf("bootpath=\"%s\"\n", bootpath);
/* Give control to the machine independent loader code. */
interact();
return 1;
}
int
devopen(struct open_file *of, const char *name, char **file)
{
char *cp;
char partition;
char fname[256];
char buf[DEV_BSIZE];
struct disklabel label;
int handle, part;
int error = 0;
#ifdef SOFTRAID
char volno;
#endif
if (ofdev.handle != -1)
panic("devopen");
if (of->f_flags != F_READ)
return EPERM;
DNPRINTF(BOOT_D_OFDEV, "devopen: you want %s\n", name);
if (strlcpy(fname, name, sizeof fname) >= sizeof fname)
return ENAMETOOLONG;
#ifdef SOFTRAID
if (bootdev_dip) {
if (fname[0] == 's' && fname[1] == 'r' &&
'0' <= fname[2] && fname[2] <= '9') {
volno = fname[2];
if ('a' <= fname[3] &&
fname[3] <= 'a' + MAXPARTITIONS) {
partition = fname[3];
if (fname[4] == ':')
cp = &fname[5];
else
cp = &fname[4];
} else {
partition = 'a';
cp = &fname[3];
}
} else {
volno = '0';
partition = 'a';
cp = &fname[0];
}
snprintf(buf, sizeof buf, "sr%c:%c", volno, partition);
if (strlcpy(opened_name, buf, sizeof opened_name)
>= sizeof opened_name)
return ENAMETOOLONG;
*file = opened_name + strlen(opened_name);
if (!*cp) {
if (strlcpy(buf, DEFAULT_KERNEL, sizeof buf)
>= sizeof buf)
return ENAMETOOLONG;
} else {
if (snprintf(buf, sizeof buf, "%s%s",
*cp == '/' ? "" : "/", cp) >= sizeof buf)
return ENAMETOOLONG;
}
if (strlcat(opened_name, buf, sizeof opened_name) >=
sizeof opened_name)
return ENAMETOOLONG;
} else {
#endif
cp = filename(fname, &partition);
if (cp) {
if (strlcpy(buf, cp, sizeof buf) >= sizeof buf)
return ENAMETOOLONG;
*cp = 0;
}
if (!cp || !*buf) {
if (strlcpy(buf, DEFAULT_KERNEL, sizeof buf)
>= sizeof buf)
return ENAMETOOLONG;
}
if (!*fname) {
if (strlcpy(fname, bootdev, sizeof fname)
>= sizeof fname)
return ENAMETOOLONG;
}
if (strlcpy(opened_name, fname,
partition ? (sizeof opened_name) - 2 : sizeof opened_name)
>= sizeof opened_name)
return ENAMETOOLONG;
if (partition) {
cp = opened_name + strlen(opened_name);
*cp++ = ':';
*cp++ = partition;
*cp = 0;
}
if (*buf != '/') {
if (strlcat(opened_name, "/", sizeof opened_name) >=
sizeof opened_name)
return ENAMETOOLONG;
}
if (strlcat(opened_name, buf, sizeof opened_name) >=
sizeof opened_name)
return ENAMETOOLONG;
*file = opened_name + strlen(fname) + 1;
#ifdef SOFTRAID
}
#endif
DNPRINTF(BOOT_D_OFDEV, "devopen: trying %s\n", fname);
#ifdef SOFTRAID
if (bootdev_dip) {
/* Redirect to the softraid boot volume. */
struct partition *pp;
bzero(&ofdev, sizeof ofdev);
ofdev.type = OFDEV_SOFTRAID;
if (partition) {
if (partition < 'a' ||
partition >= 'a' + MAXPARTITIONS) {
printf("invalid partition '%c'\n", partition);
return EINVAL;
}
part = partition - 'a';
pp = &bootdev_dip->disklabel.d_partitions[part];
if (pp->p_fstype == FS_UNUSED || pp->p_size == 0) {
printf("invalid partition '%c'\n", partition);
return EINVAL;
}
bootdev_dip->sr_vol->sbv_part = partition;
} else
bootdev_dip->sr_vol->sbv_part = 'a';
of->f_dev = devsw;
of->f_devdata = &ofdev;
#ifdef SPARC_BOOT_UFS
bcopy(&file_system_ufs, &file_system[nfsys++], sizeof file_system[0]);
#else
#error "-DSOFTRAID requires -DSPARC_BOOT_UFS"
#endif
return 0;
}
#endif
if ((handle = OF_finddevice(fname)) == -1)
return ENOENT;
DNPRINTF(BOOT_D_OFDEV, "devopen: found %s\n", fname);
if (OF_getprop(handle, "name", buf, sizeof buf) < 0)
return ENXIO;
DNPRINTF(BOOT_D_OFDEV, "devopen: %s is called %s\n", fname, buf);
if (OF_getprop(handle, "device_type", buf, sizeof buf) < 0)
return ENXIO;
DNPRINTF(BOOT_D_OFDEV, "devopen: %s is a %s device\n", fname, buf);
DNPRINTF(BOOT_D_OFDEV, "devopen: opening %s\n", fname);
if ((handle = OF_open(fname)) == -1) {
DNPRINTF(BOOT_D_OFDEV, "devopen: open of %s failed\n", fname);
return ENXIO;
}
DNPRINTF(BOOT_D_OFDEV, "devopen: %s is now open\n", fname);
bzero(&ofdev, sizeof ofdev);
ofdev.handle = handle;
ofdev.type = OFDEV_DISK;
ofdev.bsize = DEV_BSIZE;
if (!strcmp(buf, "block")) {
error = load_disklabel(&ofdev, &label);
if (error && error != ERDLAB)
goto bad;
else if (error == ERDLAB) {
if (partition)
/* User specified a parititon, but there is none */
goto bad;
/* No, label, just use complete disk */
ofdev.partoff = 0;
} else {
part = partition ? partition - 'a' : 0;
ofdev.partoff = label.d_partitions[part].p_offset;
DNPRINTF(BOOT_D_OFDEV, "devopen: setting partition %d "
"offset %x\n", part, ofdev.partoff);
}
of->f_dev = devsw;
of->f_devdata = &ofdev;
#ifdef SPARC_BOOT_UFS
bcopy(&file_system_ufs, &file_system[nfsys++], sizeof file_system[0]);
#endif
#ifdef SPARC_BOOT_HSFS
bcopy(&file_system_cd9660, &file_system[nfsys++],
sizeof file_system[0]);
#endif
DNPRINTF(BOOT_D_OFDEV, "devopen: return 0\n");
return 0;
}
#ifdef NETBOOT
if (!strcmp(buf, "network")) {
ofdev.type = OFDEV_NET;
of->f_dev = devsw;
of->f_devdata = &ofdev;
bcopy(&file_system_nfs, file_system, sizeof file_system[0]);
nfsys = 1;
if (error = net_open(&ofdev))
goto bad;
return 0;
}
#endif
error = EFTYPE;
bad:
DNPRINTF(BOOT_D_OFDEV, "devopen: error %d, cannot open device\n",
error);
OF_close(handle);
ofdev.handle = -1;
return error;
}
void
platform_start(__register_t a0 __unused, __register_t a1 __unused,
__register_t a2 __unused, __register_t a3 __unused)
{
vm_offset_t kernend;
int argc = a0, i;//, res;
uint32_t timer_clk;
char **argv = (char **)MIPS_PHYS_TO_KSEG0(a1);
char **envp = (char **)MIPS_PHYS_TO_KSEG0(a2);
void *dtbp;
phandle_t chosen;
char buf[2048];
/* clear the BSS and SBSS segments */
kernend = (vm_offset_t)&end;
memset(&edata, 0, kernend - (vm_offset_t)(&edata));
mips_postboot_fixup();
/* Initialize pcpu stuff */
mips_pcpu0_init();
dtbp = &fdt_static_dtb;
if (OF_install(OFW_FDT, 0) == FALSE)
while (1);
if (OF_init((void *)dtbp) != 0)
while (1);
mtk_soc_try_early_detect();
if ((timer_clk = mtk_soc_get_timerclk()) == 0)
timer_clk = 1000000000; /* no such speed yet */
mips_timer_early_init(timer_clk);
/* initialize console so that we have printf */
boothowto |= (RB_SERIAL | RB_MULTIPLE); /* Use multiple consoles */
boothowto |= (RB_VERBOSE);
cninit();
init_static_kenv(boot1_env, sizeof(boot1_env));
/*
* Get bsdbootargs from FDT if specified.
*/
chosen = OF_finddevice("/chosen");
if (OF_getprop(chosen, "bsdbootargs", buf, sizeof(buf)) != -1)
_parse_bootargs(buf);
printf("FDT DTB at: 0x%08x\n", (uint32_t)dtbp);
printf("CPU clock: %4dMHz\n", mtk_soc_get_cpuclk()/(1000*1000));
printf("Timer clock: %4dMHz\n", timer_clk/(1000*1000));
printf("UART clock: %4dMHz\n\n", mtk_soc_get_uartclk()/(1000*1000));
printf("U-Boot args (from %d args):\n", argc - 1);
if (argc == 1)
printf("\tNone\n");
for (i = 1; i < argc; i++) {
char *n = "argv ", *arg;
if (i > 99)
break;
if (argv[i])
{
arg = (char *)(intptr_t)MIPS_PHYS_TO_KSEG0(argv[i]);
printf("\targv[%d] = %s\n", i, arg);
sprintf(n, "argv%d", i);
kern_setenv(n, arg);
}
}
printf("Environment:\n");
for (i = 0; envp[i] && MIPS_IS_VALID_PTR(envp[i]); i++) {
char *n, *arg;
arg = (char *)(intptr_t)MIPS_PHYS_TO_KSEG0(envp[i]);
if (! MIPS_IS_VALID_PTR(arg))
continue;
printf("\t%s\n", arg);
n = strsep(&arg, "=");
if (arg == NULL)
kern_setenv(n, "1");
else
kern_setenv(n, arg);
}
mips_init();
mips_timer_init_params(timer_clk, 0);
}
void
powermac_mem_regions(platform_t plat, struct mem_region *phys, int *physsz,
struct mem_region *avail, int *availsz)
{
phandle_t memory;
cell_t memoryprop[PHYS_AVAIL_SZ * 2];
ssize_t propsize, i, j;
int physacells = 1;
memory = OF_finddevice("/memory");
if (memory == -1)
memory = OF_finddevice("/memory@0");
/* "reg" has variable #address-cells, but #size-cells is always 1 */
OF_getprop(OF_parent(memory), "#address-cells", &physacells,
sizeof(physacells));
propsize = OF_getprop(memory, "reg", memoryprop, sizeof(memoryprop));
propsize /= sizeof(cell_t);
for (i = 0, j = 0; i < propsize; i += physacells+1, j++) {
phys[j].mr_start = memoryprop[i];
if (physacells == 2) {
#ifndef __powerpc64__
/* On 32-bit PPC, ignore regions starting above 4 GB */
if (memoryprop[i] != 0) {
j--;
continue;
}
#else
phys[j].mr_start <<= 32;
#endif
phys[j].mr_start |= memoryprop[i+1];
}
phys[j].mr_size = memoryprop[i + physacells];
}
*physsz = j;
/* "available" always has #address-cells = 1 */
propsize = OF_getprop(memory, "available", memoryprop,
sizeof(memoryprop));
if (propsize <= 0) {
for (i = 0; i < *physsz; i++) {
avail[i].mr_start = phys[i].mr_start;
avail[i].mr_size = phys[i].mr_size;
}
*availsz = *physsz;
} else {
propsize /= sizeof(cell_t);
for (i = 0, j = 0; i < propsize; i += 2, j++) {
avail[j].mr_start = memoryprop[i];
avail[j].mr_size = memoryprop[i + 1];
}
#ifdef __powerpc64__
/* Add in regions above 4 GB to the available list */
for (i = 0; i < *physsz; i++) {
if (phys[i].mr_start > BUS_SPACE_MAXADDR_32BIT) {
avail[j].mr_start = phys[i].mr_start;
avail[j].mr_size = phys[i].mr_size;
j++;
}
}
#endif
*availsz = j;
}
}
static void
get_bootpath_from_prom(void)
{
struct btinfo_bootdev *bdev = NULL;
char sbuf[OFPATHLEN], *cp;
int chosen;
/*
* Grab boot path from PROM
*/
if ((chosen = OF_finddevice("/chosen")) == -1)
return;
bdev = lookup_bootinfo(BTINFO_BOOTDEV);
if (bdev != NULL) {
strcpy(ofbootpath, bdev->name);
} else {
if (OF_getprop(chosen, "bootpath", sbuf, sizeof(sbuf)) < 0)
return;
strcpy(ofbootpath, sbuf);
}
DPRINTF(ACDB_BOOTDEV, ("bootpath: %s\n", ofbootpath));
ofbootpackage = prom_finddevice(ofbootpath);
/*
* Strip partition or boot protocol
*/
cp = strrchr(ofbootpath, ':');
if (cp) {
*cp = '\0';
ofbootpartition = cp+1;
}
cp = strrchr(ofbootpath, '@');
if (cp) {
for (; cp != ofbootpath; cp--) {
if (*cp == '/') {
ofboottarget = cp+1;
break;
}
}
}
DPRINTF(ACDB_BOOTDEV, ("bootpath phandle: 0x%x\n", ofbootpackage));
DPRINTF(ACDB_BOOTDEV, ("boot target: %s\n",
ofboottarget ? ofboottarget : "<none>"));
DPRINTF(ACDB_BOOTDEV, ("boot partition: %s\n",
ofbootpartition ? ofbootpartition : "<none>"));
/* Setup pointer to boot flags */
if (OF_getprop(chosen, "bootargs", sbuf, sizeof(sbuf)) == -1)
return;
strcpy(ofbootargs, sbuf);
cp = ofbootargs;
/* Find start of boot flags */
while (*cp) {
while(*cp == ' ' || *cp == '\t') cp++;
if (*cp == '-' || *cp == '\0')
break;
while(*cp != ' ' && *cp != '\t' && *cp != '\0') cp++;
if (*cp != '\0')
*cp++ = '\0';
}
if (cp != ofbootargs)
ofbootfile = ofbootargs;
ofbootflags = cp;
if (*cp != '-')
return;
for (;*++cp;) {
int fl;
fl = 0;
BOOT_FLAG(*cp, fl);
if (!fl) {
printf("unknown option `%c'\n", *cp);
continue;
}
boothowto |= fl;
/* specialties */
if (*cp == 'd') {
#if defined(KGDB)
kgdb_break_at_attach = 1;
#elif defined(DDB)
Debugger();
#else
printf("kernel has no debugger\n");
#endif
} else if (*cp == 't') {
/* turn on traptrace w/o breaking into kdb */
extern int trap_trace_dis;
trap_trace_dis = 0;
}
}
}
int
uart_cpu_getdev(int devtype, struct uart_devinfo *di)
{
char buf[64];
struct uart_class *class;
phandle_t input, opts, chosen;
int error;
opts = OF_finddevice("/options");
chosen = OF_finddevice("/chosen");
switch (devtype) {
case UART_DEV_CONSOLE:
error = ENXIO;
if (chosen != -1 && error != 0)
error = ofw_get_uart_console(chosen, &input,
"stdout-path", NULL);
if (chosen != -1 && error != 0)
error = ofw_get_uart_console(chosen, &input,
"linux,stdout-path", NULL);
if (chosen != -1 && error != 0)
error = ofw_get_console_phandle_path(chosen, &input,
"stdout");
if (chosen != -1 && error != 0)
error = ofw_get_uart_console(chosen, &input,
"stdin-path", NULL);
if (chosen != -1 && error != 0)
error = ofw_get_console_phandle_path(chosen, &input,
"stdin");
if (opts != -1 && error != 0)
error = ofw_get_uart_console(opts, &input,
"input-device", "output-device");
if (opts != -1 && error != 0)
error = ofw_get_uart_console(opts, &input,
"input-device-1", "output-device-1");
if (error != 0) {
input = OF_finddevice("serial0"); /* Last ditch */
if (input == -1)
error = (ENXIO);
}
if (error != 0)
return (error);
break;
case UART_DEV_DBGPORT:
if (!getenv_string("hw.uart.dbgport", buf, sizeof(buf)))
return (ENXIO);
input = OF_finddevice(buf);
if (input == -1)
return (ENXIO);
break;
default:
return (EINVAL);
}
if (OF_getprop(input, "device_type", buf, sizeof(buf)) == -1)
return (ENXIO);
if (strcmp(buf, "serial") != 0)
return (ENXIO);
if (OF_getprop(input, "compatible", buf, sizeof(buf)) == -1)
return (ENXIO);
if (strncmp(buf, "chrp,es", 7) == 0) {
class = &uart_z8530_class;
di->bas.regshft = 4;
di->bas.chan = 1;
} else if (strcmp(buf,"ns16550") == 0 || strcmp(buf,"ns8250") == 0) {
/*
* Called back during autoconfiguration for each device found
*/
void
device_register(device_t dev, void *aux)
{
device_t busdev = device_parent(dev);
int ofnode = 0;
/*
* We don't know the type of 'aux' - it depends on the
* bus this device attaches to. We are only interested in
* certain bus types, this only is used to find the boot
* device.
*/
if (busdev == NULL) {
/*
* Ignore mainbus0 itself, it certainly is not a boot
* device.
*/
} else if (device_is_a(busdev, "mainbus")) {
struct mainbus_attach_args *ma = aux;
ofnode = ma->ma_node;
} else if (device_is_a(busdev, "pci")) {
struct pci_attach_args *pa = aux;
ofnode = PCITAG_NODE(pa->pa_tag);
} else if (device_is_a(busdev, "sbus") || device_is_a(busdev, "dma")
|| device_is_a(busdev, "ledma")) {
struct sbus_attach_args *sa = aux;
ofnode = sa->sa_node;
} else if (device_is_a(busdev, "ebus")) {
struct ebus_attach_args *ea = aux;
ofnode = ea->ea_node;
} else if (device_is_a(busdev, "iic")) {
struct i2c_attach_args *ia = aux;
if (ia->ia_name == NULL) /* indirect config */
return;
ofnode = (int)ia->ia_cookie;
} else if (device_is_a(dev, "sd") || device_is_a(dev, "cd")) {
struct scsipibus_attach_args *sa = aux;
struct scsipi_periph *periph = sa->sa_periph;
int off = 0;
/*
* There are two "cd" attachments:
* atapibus -> atabus -> controller
* scsibus -> controller
* We want the node of the controller.
*/
if (device_is_a(busdev, "atapibus")) {
busdev = device_parent(busdev);
/*
* if the atapibus is connected to the secondary
* channel of the atabus, we need an offset of 2
* to match OF's idea of the target number.
* (i.e. on U5/U10 "cdrom" and "disk2" have the
* same target encoding, though different names)
*/
if (periph->periph_channel->chan_channel == 1)
off = 2;
}
ofnode = device_ofnode(device_parent(busdev));
dev_path_drive_match(dev, ofnode, periph->periph_target + off,
0, periph->periph_lun);
return;
} else if (device_is_a(dev, "wd")) {
struct ata_device *adev = aux;
ofnode = device_ofnode(device_parent(busdev));
dev_path_drive_match(dev, ofnode, adev->adev_channel*2+
adev->adev_drv_data->drive, 0, 0);
return;
}
if (busdev == NULL)
return;
if (ofnode != 0) {
uint8_t eaddr[ETHER_ADDR_LEN];
char tmpstr[32];
char tmpstr2[32];
int node;
uint32_t id = 0;
uint64_t nwwn = 0, pwwn = 0;
prop_dictionary_t dict;
prop_data_t blob;
prop_number_t pwwnd = NULL, nwwnd = NULL;
prop_number_t idd = NULL;
device_setofnode(dev, ofnode);
dev_path_exact_match(dev, ofnode);
if (OF_getprop(ofnode, "name", tmpstr, sizeof(tmpstr)) <= 0)
tmpstr[0] = 0;
if (OF_getprop(ofnode, "device_type", tmpstr2, sizeof(tmpstr2)) <= 0)
tmpstr2[0] = 0;
/*
* If this is a network interface, note the
* mac address.
*/
if (strcmp(tmpstr, "network") == 0
|| strcmp(tmpstr, "ethernet") == 0
|| strcmp(tmpstr2, "network") == 0
|| strcmp(tmpstr2, "ethernet") == 0
|| OF_getprop(ofnode, "mac-address", &eaddr, sizeof(eaddr))
>= ETHER_ADDR_LEN
|| OF_getprop(ofnode, "local-mac-address", &eaddr, sizeof(eaddr))
>= ETHER_ADDR_LEN) {
dict = device_properties(dev);
/*
* Is it a network interface with FCode?
*/
if (strcmp(tmpstr, "network") == 0 ||
strcmp(tmpstr2, "network") == 0) {
prop_dictionary_set_bool(dict,
"without-seeprom", true);
prom_getether(ofnode, eaddr);
} else {
if (!prom_get_node_ether(ofnode, eaddr))
goto noether;
}
blob = prop_data_create_data(eaddr, ETHER_ADDR_LEN);
prop_dictionary_set(dict, "mac-address", blob);
prop_object_release(blob);
of_to_dataprop(dict, ofnode, "shared-pins",
"shared-pins");
}
noether:
/* is this a FC node? */
if (strcmp(tmpstr, "scsi-fcp") == 0) {
dict = device_properties(dev);
if (OF_getprop(ofnode, "port-wwn", &pwwn, sizeof(pwwn))
== sizeof(pwwn)) {
pwwnd =
prop_number_create_unsigned_integer(pwwn);
prop_dictionary_set(dict, "port-wwn", pwwnd);
prop_object_release(pwwnd);
}
if (OF_getprop(ofnode, "node-wwn", &nwwn, sizeof(nwwn))
== sizeof(nwwn)) {
nwwnd =
prop_number_create_unsigned_integer(nwwn);
prop_dictionary_set(dict, "node-wwn", nwwnd);
prop_object_release(nwwnd);
}
}
/* is this an spi device? look for scsi-initiator-id */
if (strcmp(tmpstr2, "scsi") == 0 ||
strcmp(tmpstr2, "scsi-2") == 0) {
dict = device_properties(dev);
for (node = ofnode; node != 0; node = OF_parent(node)) {
if (OF_getprop(node, "scsi-initiator-id", &id,
sizeof(id)) <= 0)
continue;
idd = prop_number_create_unsigned_integer(id);
prop_dictionary_set(dict,
"scsi-initiator-id", idd);
prop_object_release(idd);
break;
}
}
}
/*
* Check for I2C busses and add data for their direct configuration.
*/
if (device_is_a(dev, "iic")) {
int busnode = device_ofnode(busdev);
if (busnode) {
prop_dictionary_t props = device_properties(busdev);
prop_object_t cfg = prop_dictionary_get(props,
"i2c-child-devices");
if (!cfg) {
int node;
const char *name;
/*
* pmu's i2c devices are under the "i2c" node,
* so find it out.
*/
name = prom_getpropstring(busnode, "name");
if (strcmp(name, "pmu") == 0) {
for (node = OF_child(busnode);
node != 0; node = OF_peer(node)) {
name = prom_getpropstring(node,
"name");
if (strcmp(name, "i2c") == 0) {
busnode = node;
break;
}
}
}
of_enter_i2c_devs(props, busnode,
sizeof(cell_t));
}
}
/*
* Add SPARCle spdmem devices (0x50 and 0x51) that the
* firmware does not know about.
*/
if (!strcmp(machine_model, "TAD,SPARCLE")) {
prop_dictionary_t props = device_properties(busdev);
prop_array_t cfg = prop_array_create();
int i;
DPRINTF(ACDB_PROBE, ("\nAdding spdmem for SPARCle "));
for (i = 0x50; i <= 0x51; i++) {
prop_dictionary_t spd =
prop_dictionary_create();
prop_dictionary_set_cstring(spd, "name",
"dimm-spd");
prop_dictionary_set_uint32(spd, "addr", i);
prop_dictionary_set_uint64(spd, "cookie", 0);
prop_array_add(cfg, spd);
prop_object_release(spd);
}
prop_dictionary_set(props, "i2c-child-devices", cfg);
prop_object_release(cfg);
}
}
/* set properties for PCI framebuffers */
if (device_is_a(busdev, "pci")) {
/* see if this is going to be console */
struct pci_attach_args *pa = aux;
prop_dictionary_t dict;
int sub;
int console = 0;
dict = device_properties(dev);
/* we only care about display devices from here on */
if (PCI_CLASS(pa->pa_class) != PCI_CLASS_DISPLAY)
return;
console = (ofnode == console_node);
if (!console) {
/*
* see if any child matches since OF attaches
* nodes for each head and /chosen/stdout
* points to the head rather than the device
* itself in this case
*/
sub = OF_child(ofnode);
while ((sub != 0) && (sub != console_node)) {
sub = OF_peer(sub);
}
if (sub == console_node) {
console = true;
}
}
copyprops(busdev, ofnode, dict, console);
if (console) {
uint64_t cmap_cb;
prop_dictionary_set_uint32(dict,
"instance_handle", console_instance);
gfb_cb.gcc_cookie =
(void *)(intptr_t)console_instance;
gfb_cb.gcc_set_mapreg = of_set_palette;
cmap_cb = (uint64_t)(uintptr_t)&gfb_cb;
prop_dictionary_set_uint64(dict,
"cmap_callback", cmap_cb);
}
#ifdef notyet
else {
int width;
/*
* the idea is to 'open' display devices with no useful
* properties, in the hope that the firmware will
* properly initialize them and we can run things like
* genfb on them
*/
if (OF_getprop(node, "width", &width, sizeof(width))
!= 4) {
instance = OF_open(name);
#endif
}
}
/*
* Called back after autoconfiguration of a device is done
*/
void
device_register_post_config(device_t dev, void *aux)
{
if (booted_device == NULL && device_is_a(dev, "sd")) {
struct scsipibus_attach_args *sa = aux;
struct scsipi_periph *periph = sa->sa_periph;
uint64_t wwn = 0;
int ofnode;
/*
* If this is a FC-AL drive it will have
* aquired its WWN device property by now,
* so we can properly match it.
*/
if (prop_dictionary_get_uint64(device_properties(dev),
"port-wwn", &wwn)) {
/*
* Different to what we do in device_register,
* we do not pass the "controller" ofnode,
* because FC-AL devices attach below a "fp" node,
* E.g.: /pci/SUNW,qlc@4/fp@0,0/disk
* and we need the parent of "disk" here.
*/
ofnode = device_ofnode(
device_parent(device_parent(dev)));
for (ofnode = OF_child(ofnode);
ofnode != 0 && booted_device == NULL;
ofnode = OF_peer(ofnode)) {
dev_path_drive_match(dev, ofnode,
periph->periph_target,
wwn, periph->periph_lun);
}
}
}
}
static void
copyprops(device_t busdev, int node, prop_dictionary_t dict, int is_console)
{
device_t cntrlr;
prop_dictionary_t psycho;
paddr_t fbpa, mem_base = 0;
uint32_t temp, fboffset;
uint32_t fbaddr = 0;
int options;
char output_device[256];
char *pos;
cntrlr = device_parent(busdev);
if (cntrlr != NULL) {
psycho = device_properties(cntrlr);
prop_dictionary_get_uint64(psycho, "mem_base", &mem_base);
}
if (is_console)
prop_dictionary_set_bool(dict, "is_console", 1);
of_to_uint32_prop(dict, node, "width", "width");
of_to_uint32_prop(dict, node, "height", "height");
of_to_uint32_prop(dict, node, "linebytes", "linebytes");
if (!of_to_uint32_prop(dict, node, "depth", "depth") &&
/* Some cards have an extra space in the property name */
!of_to_uint32_prop(dict, node, "depth ", "depth")) {
/*
* XXX we should check linebytes vs. width but those
* FBs that don't have a depth property ( /chaos/control... )
* won't have linebytes either
*/
prop_dictionary_set_uint32(dict, "depth", 8);
}
OF_getprop(node, "address", &fbaddr, sizeof(fbaddr));
if (fbaddr != 0) {
pmap_extract(pmap_kernel(), fbaddr, &fbpa);
#ifdef DEBUG
printf("membase: %lx fbpa: %lx\n", (unsigned long)mem_base,
(unsigned long)fbpa);
#endif
if (mem_base == 0) {
/* XXX this is guesswork */
fboffset = (uint32_t)(fbpa & 0xffffffff);
}
fboffset = (uint32_t)(fbpa - mem_base);
prop_dictionary_set_uint32(dict, "address", fboffset);
}
if (!of_to_dataprop(dict, node, "EDID", "EDID"))
of_to_dataprop(dict, node, "edid", "EDID");
temp = 0;
if (OF_getprop(node, "ATY,RefCLK", &temp, sizeof(temp)) != 4) {
OF_getprop(OF_parent(node), "ATY,RefCLK", &temp,
sizeof(temp));
}
if (temp != 0)
prop_dictionary_set_uint32(dict, "refclk", temp / 10);
/*
* finally, let's see if there's a video mode specified in
* output-device and pass it on so drivers like radeonfb
* can do their thing
*/
if (!is_console)
return;
options = OF_finddevice("/options");
if ((options == 0) || (options == -1))
return;
if (OF_getprop(options, "output-device", output_device, 256) == 0)
return;
/* find the mode string if there is one */
pos = strstr(output_device, ":r");
if (pos == NULL)
return;
prop_dictionary_set_cstring(dict, "videomode", pos + 2);
}
static void
of_set_palette(void *cookie, int index, int r, int g, int b)
{
int ih = (int)((intptr_t)cookie);
OF_call_method_1("color!", ih, 4, r, g, b, index);
}
int
devopen(struct open_file *of, const char *name, char **file)
{
char *cp;
char partition;
char fname[256];
char buf[DEV_BSIZE];
struct disklabel label;
int handle, part;
size_t read;
char *errmsg = NULL;
int error = 0;
if (ofdev.handle != -1)
panic("devopen");
if (of->f_flags != F_READ)
return EPERM;
DNPRINTF(BOOT_D_OFDEV, "devopen: you want %s\n", name);
strlcpy(fname, name, sizeof fname);
cp = filename(fname, &partition);
if (cp) {
strlcpy(buf, cp, sizeof buf);
*cp = 0;
}
if (!cp || !*buf)
strlcpy(buf, DEFAULT_KERNEL, sizeof buf);
if (!*fname)
strlcpy(fname, bootdev, sizeof fname);
strlcpy(opened_name, fname, sizeof opened_name);
if (partition) {
cp = opened_name + strlen(opened_name);
*cp++ = ':';
*cp++ = partition;
*cp = 0;
}
if (*buf != '/')
strlcat(opened_name, "/", sizeof opened_name);
strlcat(opened_name, buf, sizeof opened_name);
*file = opened_name + strlen(fname) + 1;
DNPRINTF(BOOT_D_OFDEV, "devopen: trying %s\n", fname);
if ((handle = OF_finddevice(fname)) == -1)
return ENOENT;
DNPRINTF(BOOT_D_OFDEV, "devopen: found %s\n", fname);
if (OF_getprop(handle, "name", buf, sizeof buf) < 0)
return ENXIO;
DNPRINTF(BOOT_D_OFDEV, "devopen: %s is called %s\n", fname, buf);
if (OF_getprop(handle, "device_type", buf, sizeof buf) < 0)
return ENXIO;
DNPRINTF(BOOT_D_OFDEV, "devopen: %s is a %s device\n", fname, buf);
DNPRINTF(BOOT_D_OFDEV, "devopen: opening %s\n", fname);
if ((handle = OF_open(fname)) == -1) {
DNPRINTF(BOOT_D_OFDEV, "devopen: open of %s failed\n", fname);
return ENXIO;
}
DNPRINTF(BOOT_D_OFDEV, "devopen: %s is now open\n", fname);
bzero(&ofdev, sizeof ofdev);
ofdev.handle = handle;
if (!strcmp(buf, "block")) {
ofdev.type = OFDEV_DISK;
ofdev.bsize = DEV_BSIZE;
/* First try to find a disklabel without MBR partitions */
DNPRINTF(BOOT_D_OFDEV, "devopen: trying to read disklabel\n");
if (strategy(&ofdev, F_READ,
LABELSECTOR, DEV_BSIZE, buf, &read) != 0
|| read != DEV_BSIZE
|| (errmsg = getdisklabel(buf, &label))) {
#ifdef BOOT_DEBUG
if (errmsg)
DNPRINTF(BOOT_D_OFDEV,
"devopen: getdisklabel says %s\n", errmsg);
#endif
/* Else try MBR partitions */
errmsg = search_label(&ofdev, LABELSECTOR, buf,
&label, 0);
if (errmsg) {
printf("devopen: search_label says %s\n", errmsg);
error = ERDLAB;
}
if (error && error != ERDLAB)
goto bad;
}
if (error == ERDLAB) {
if (partition)
/* User specified a parititon, but there is none */
goto bad;
/* No, label, just use complete disk */
ofdev.partoff = 0;
} else {
part = partition ? partition - 'a' : 0;
ofdev.partoff = label.d_partitions[part].p_offset;
DNPRINTF(BOOT_D_OFDEV, "devopen: setting partition %d "
"offset %x\n", part, ofdev.partoff);
}
of->f_dev = devsw;
of->f_devdata = &ofdev;
#ifdef SPARC_BOOT_UFS
bcopy(&file_system_ufs, &file_system[nfsys++], sizeof file_system[0]);
#endif
#ifdef SPARC_BOOT_HSFS
bcopy(&file_system_cd9660, &file_system[nfsys++],
sizeof file_system[0]);
#endif
DNPRINTF(BOOT_D_OFDEV, "devopen: return 0\n");
return 0;
}
#ifdef NETBOOT
if (!strcmp(buf, "network")) {
ofdev.type = OFDEV_NET;
of->f_dev = devsw;
of->f_devdata = &ofdev;
bcopy(&file_system_nfs, file_system, sizeof file_system[0]);
nfsys = 1;
if (error = net_open(&ofdev))
goto bad;
return 0;
}
#endif
error = EFTYPE;
bad:
DNPRINTF(BOOT_D_OFDEV, "devopen: error %d, cannot open device\n",
error);
OF_close(handle);
ofdev.handle = -1;
return error;
}
asmlinkage void ofw_init(ofw_handle_t o, int *nomr, int *pointer)
{
int phandle,i,mem_len,buffer[32];
char temp[15];
temp[0]='/';
temp[1]='m';
temp[2]='e';
temp[3]='m';
temp[4]='o';
temp[5]='r';
temp[6]='y';
temp[7]='\0';
phandle=OF_finddevice(o,temp);
temp[0]='r';
temp[1]='e';
temp[2]='g';
temp[3]='\0';
mem_len = OF_getproplen(o,phandle, temp);
OF_getprop(o,phandle, temp, buffer, mem_len);
*nomr=mem_len >> 3;
for (i=0; i<=mem_len/4; i++) pointer[i]=of_decode_int((const unsigned char *)&buffer[i]);
temp[0]='/';
temp[1]='c';
temp[2]='h';
temp[3]='o';
temp[4]='s';
temp[5]='e';
temp[6]='n';
temp[7]='\0';
phandle=OF_finddevice(o,temp);
temp[0]='b';
temp[1]='o';
temp[2]='o';
temp[3]='t';
temp[4]='a';
temp[5]='r';
temp[6]='g';
temp[7]='s';
temp[8]='\0';
mem_len = OF_getproplen(o,phandle, temp);
OF_getprop(o,phandle, temp, buffer, mem_len);
if (mem_len > 128) mem_len=128;
for (i=0; i<=mem_len/4; i++) pointer[i+33]=buffer[i];
pointer[i+33]=0;
temp[0]='/';
temp[1]='\0';
phandle=OF_finddevice(o,temp);
temp[0]='b';
temp[1]='a';
temp[2]='n';
temp[3]='n';
temp[4]='e';
temp[5]='r';
temp[6]='-';
temp[7]='n';
temp[8]='a';
temp[9]='m';
temp[10]='e';
temp[11]='\0';
mem_len = OF_getproplen(o,phandle, temp);
OF_getprop(o,phandle, temp, buffer, mem_len);
(unsigned char) pointer[32] = ((unsigned char *) buffer)[mem_len-2];
}
/*
* Attach all the sub-devices we can find
*/
void
macobio_attach(struct device *parent, struct device *self, void *aux)
{
struct macobio_softc *sc = (struct macobio_softc *)self;
struct pci_attach_args *pa = aux;
struct confargs ca;
int node, child, namelen;
u_int32_t reg[20];
int32_t intr[8];
char name[32];
int need_interrupt_controller = 0;
sc->sc_id = pa->pa_id; /* save of type for later */
switch (PCI_PRODUCT(pa->pa_id)) {
/* XXX should not use name */
case PCI_PRODUCT_APPLE_GC:
node = OF_finddevice("/bandit/gc");
need_interrupt_controller = 1;
break;
case PCI_PRODUCT_APPLE_OHARE:
node = OF_finddevice("/bandit/ohare");
need_interrupt_controller = 1;
break;
case PCI_PRODUCT_APPLE_HEATHROW:
case PCI_PRODUCT_APPLE_PADDINGTON:
node = OF_finddevice("mac-io");
if (node == -1)
node = OF_finddevice("/pci/mac-io");
if (OF_getprop(node, "assigned-addresses", reg, sizeof(reg))
== (sizeof (reg[0]) * 5))
{
/* always ??? */
heathrow_FCR = mapiodev(reg[2] + HEATHROW_FCR_OFFSET,
4);
}
break;
case PCI_PRODUCT_APPLE_KEYLARGO:
case PCI_PRODUCT_APPLE_INTREPID:
case PCI_PRODUCT_APPLE_PANGEA_MACIO:
case PCI_PRODUCT_APPLE_SHASTA:
case PCI_PRODUCT_APPLE_K2_MACIO:
node = OF_finddevice("mac-io");
if (node == -1)
node = OF_finddevice("/pci/mac-io");
if (OF_getprop(node, "assigned-addresses", reg, sizeof(reg))
== (sizeof (reg[0]) * 5))
sc->obiomem = mapiodev(reg[2], 0x100);
break;
default:
printf(": unknown macobio controller\n");
return;
}
sc->sc_node = node;
if (OF_getprop(node, "assigned-addresses", reg, sizeof(reg)) < 12)
return;
ca.ca_baseaddr = reg[2];
sc->sc_membus_space.bus_base = ca.ca_baseaddr;
ca.ca_iot = &sc->sc_membus_space;
ca.ca_dmat = pa->pa_dmat;
printf("\n");
/*
* This might be a hack, but it makes the interrupt controller
* attach as expected if a device node existed in the OF tree.
*/
if (need_interrupt_controller) {
/* force attachment of legacy interrupt controllers */
ca.ca_name = "legacy-interrupt-controller";
ca.ca_node = 0;
ca.ca_nreg = 0;
ca.ca_nintr = 0;
ca.ca_reg = NULL;
ca.ca_intr = NULL;
config_found(self, &ca, macobio_print);
}
for (child = OF_child(node); child; child = OF_peer(child)) {
namelen = OF_getprop(child, "name", name, sizeof(name));
if (namelen < 0)
continue;
if (namelen >= sizeof(name))
continue;
name[namelen] = 0;
ca.ca_name = name;
ca.ca_node = child;
ca.ca_nreg = OF_getprop(child, "reg", reg, sizeof(reg));
ca.ca_nintr = OF_getprop(child, "AAPL,interrupts", intr,
sizeof(intr));
if (ca.ca_nintr == -1)
ca.ca_nintr = OF_getprop(child, "interrupts", intr,
sizeof(intr));
ca.ca_reg = reg;
ca.ca_intr = intr;
config_found(self, &ca, macobio_print);
}
}
void
kauaiataattach(struct device *parent, struct device *self, void *aux)
{
int node;
struct confargs ca;
int namelen;
u_int32_t reg[20];
char name[32];
int32_t intr[8];
struct kauaiata_softc *sc = (struct kauaiata_softc *)self;
struct pci_attach_args *pa = aux;
pci_chipset_tag_t pc = pa->pa_pc;
/* XXX assumes that this is /pci@f400000/ata-6 */
/*
vendor 0x106b product 0x003b (class undefined unknown subclass 0x00, rev 0x00) at pci2 dev 13 function 0 not configured
*/
node = OF_finddevice("/pci@f4000000/ata-6");
/*
* XXX - need to compare node and PCI id to verify this is the
* correct device.
*/
ca.ca_nreg = OF_getprop(node, "reg", reg, sizeof(reg));
intr[0] = PCI_INTERRUPT_LINE(pci_conf_read(pc, pa->pa_tag,
PCI_INTERRUPT_REG));
ca.ca_nintr = 4; /* claim to have 4 bytes of interrupt info */
/* This needs to come from INTERRUPT REG above, but is not filled out */
intr[0] = 0x27;
namelen = OF_getprop(node, "name", name, sizeof(name));
if ((namelen < 0) || (namelen >= sizeof(name))) {
printf(" bad name prop len %x\n", namelen);
return;
}
name[namelen] = 0; /* name property may not be null terminated */
/* config read */
sc->sc_membus_space.bus_base =
pci_conf_read(pc, pa->pa_tag, PCI_MAPREG_START);
#if 0
pci_conf_write(pc, pa->pa_tag, PCI_MAPREG_START, 0xffffffff);
size = ~(pci_conf_read(pc, pa->pa_tag, PCI_MAPREG_START));
pci_conf_write(pc, pa->pa_tag, PCI_MAPREG_START,
sc->sc_membus_space.bus_base);
#endif
ca.ca_baseaddr = sc->sc_membus_space.bus_base;
sc->sc_membus_space.bus_reverse = 1;
ca.ca_name = name;
ca.ca_iot = &sc->sc_membus_space;
ca.ca_dmat = pa->pa_dmat;
ca.ca_reg = reg;
reg[0] = 0x2000; /* offset to wdc registers */
reg[1] = reg[9] - 0x2000; /* map size of wdc registers */
reg[2] = 0x1000; /* offset to dbdma registers */
reg[3] = 0x1000; /* map size of dbdma registers */
ca.ca_intr = intr;
printf("\n");
config_found(self, &ca, kauaiata_print);
}
static void
rtas_setup(void *junk)
{
ihandle_t rtasi;
cell_t rtas_size = 0, rtas_ptr;
char path[31];
int result;
rtas = OF_finddevice("/rtas");
if (rtas == -1) {
rtas = 0;
return;
}
OF_package_to_path(rtas, path, sizeof(path));
rtasi = OF_open(path);
if (rtasi == 0) {
rtas = 0;
printf("Error initializing RTAS: could not open node\n");
return;
}
mtx_init(&rtas_mtx, "RTAS", MTX_DEF, 0);
/* RTAS must be called with everything turned off in MSR */
rtasmsr = mfmsr();
rtasmsr &= ~(PSL_IR | PSL_DR | PSL_EE | PSL_SE);
#ifdef __powerpc64__
rtasmsr &= ~PSL_SF;
#endif
/*
* Allocate rtas_size + one page of contiguous, wired physical memory
* that can fit into a 32-bit address space and accessed from real mode.
* This is used both to bounce arguments and for RTAS private data.
*
* It must be 4KB-aligned and not cross a 256 MB boundary.
*/
OF_getprop(rtas, "rtas-size", &rtas_size, sizeof(rtas_size));
rtas_size = round_page(rtas_size);
rtas_bounce_virt = contigmalloc(rtas_size + PAGE_SIZE, M_RTAS, 0, 0,
ulmin(platform_real_maxaddr(), BUS_SPACE_MAXADDR_32BIT),
4096, 256*1024*1024);
rtas_private_data = vtophys(rtas_bounce_virt);
rtas_bounce_virt += rtas_size; /* Actual bounce area */
rtas_bounce_phys = vtophys(rtas_bounce_virt);
rtas_bounce_size = PAGE_SIZE;
/*
* Instantiate RTAS. We always use the 32-bit version.
*/
result = OF_call_method("instantiate-rtas", rtasi, 1, 1,
(cell_t)rtas_private_data, &rtas_ptr);
OF_close(rtasi);
if (result != 0) {
rtas = 0;
rtas_ptr = 0;
printf("Error initializing RTAS (%d)\n", result);
return;
}
rtas_entry = (uintptr_t)(rtas_ptr);
}