void SCH_EDIT_FRAME::OnFindReplace( wxFindDialogEvent& aEvent )
{
SCH_FIND_COLLECTOR_DATA data;
bool warpCursor = !( aEvent.GetFlags() & FR_NO_WARP_CURSOR );
SCH_ITEM* item = (SCH_ITEM*) m_foundItems.GetItem( data );
wxCHECK_RET( item != NULL, wxT( "Invalid replace item in find collector list." ) );
wxLogTrace( traceFindReplace, wxT( "Replacing %s with %s in item %s" ),
GetChars( aEvent.GetFindString() ), GetChars( aEvent.GetReplaceString() ),
GetChars( m_foundItems.GetText() ) );
SCH_ITEM* undoItem = data.GetParent();
if( undoItem == NULL )
undoItem = item;
SetUndoItem( undoItem );
if( m_foundItems.ReplaceItem() )
{
OnModify();
SaveUndoItemInUndoList( undoItem );
RedrawScreen( data.GetPosition(), warpCursor );
}
OnFindSchematicItem( aEvent );
if( aEvent.GetEventType() == wxEVT_COMMAND_FIND_REPLACE_ALL )
{
while( ( item = (SCH_ITEM*) m_foundItems.GetItem( data ) ) != NULL )
{
wxLogTrace( traceFindReplace, wxT( "Replacing %s with %s in item %s" ),
GetChars( aEvent.GetFindString() ), GetChars( aEvent.GetReplaceString() ),
GetChars( m_foundItems.GetText() ) );
SCH_ITEM* undoItem = data.GetParent();
// Don't save child items in undo list.
if( undoItem == NULL )
undoItem = item;
SetUndoItem( undoItem );
if( m_foundItems.ReplaceItem() )
{
OnModify();
SaveUndoItemInUndoList( undoItem );
RedrawScreen( data.GetPosition(), warpCursor );
}
OnFindSchematicItem( aEvent );
}
}
}
BOOL CScriptDlg::OnNotify(WPARAM wParam, LPARAM lParam, LRESULT* pResult)
{
NMHDR *phDR;
phDR = (NMHDR*)lParam;
// Does notification come from scintilla window?
if (phDR != NULL)
{
CScintillaWnd* m_wndScintilla = NULL;
if(phDR->hwndFrom == m_Script.m_hWnd)
m_wndScintilla = &m_Script;
if(phDR->hwndFrom == m_Help.m_hWnd)
m_wndScintilla = &m_Help;
SCNotification *pMsg = (SCNotification*)lParam;
switch(phDR->code)
{
case SCN_SAVEPOINTLEFT:
break;
case SCN_UPDATEUI:
m_wndScintilla->UpdateUI();
OnModify();
break;
case SCN_MARGINCLICK:
m_wndScintilla->DoDefaultFolding(pMsg->margin,pMsg->position);
break;
case SCN_DOUBLECLICK:
HelpMe();
break;
case SCN_CHARADDED:
{
SCNotification *scn = (SCNotification*)phDR;
OnChar(scn->ch);
OnModify();
break;
}
case SCN_MODIFIED:
OnModify();
break;
}
return TRUE;
}
return CWnd::OnNotify(wParam, lParam, pResult);
}
bool SCH_EDIT_FRAME::RescueProject( bool aRunningOnDemand )
{
RESCUER rescuer( *this, Prj() );
rescuer.FindCandidates();
if( ! rescuer.GetCandidateCount() )
{
if( aRunningOnDemand )
{
wxMessageDialog dlg( this, _( "This project has nothing to rescue." ),
_( "Project Rescue Helper" ) );
dlg.ShowModal();
}
return true;
}
rescuer.RemoveDuplicates();
rescuer.InvokeDialog( !aRunningOnDemand );
// If no components were rescued, let the user know what's going on. He might
// have clicked cancel by mistake, and should have some indication of that.
if( !rescuer.GetChosenCandidateCount() )
{
wxMessageDialog dlg( this, _( "No symbols were rescued." ),
_( "Project Rescue Helper" ) );
dlg.ShowModal();
// Set the modified flag even on Cancel. Many users seem to instinctively want to Save at
// this point, due to the reloading of the symbols, so we'll make the save button active.
OnModify();
return true;
}
RESCUE_CACHE_CANDIDATE::OpenRescueLibrary();
if( !rescuer.DoRescues() )
{
rescuer.UndoRescues();
return false;
}
RESCUE_CACHE_CANDIDATE::WriteRescueLibrary( this, &Prj() );
Prj().SetElem( PROJECT::ELEM_SCH_PART_LIBS, NULL );
// Clean up wire ends
GetScreen()->SchematicCleanUp();
m_canvas->Refresh( true );
OnModify();
return true;
}
SCH_SHEET_PIN* SCH_EDIT_FRAME::CreateSheetPin( SCH_SHEET* aSheet, wxDC* aDC )
{
wxString line;
SCH_SHEET_PIN* sheetPin;
sheetPin = new SCH_SHEET_PIN( aSheet, wxPoint( 0, 0 ), line );
sheetPin->SetFlags( IS_NEW );
sheetPin->SetSize( m_lastSheetPinTextSize );
sheetPin->SetShape( m_lastSheetPinType );
int response = EditSheetPin( sheetPin, NULL );
if( sheetPin->GetText().IsEmpty() || (response == wxID_CANCEL) )
{
delete sheetPin;
return NULL;
}
m_lastSheetPinType = sheetPin->GetShape();
m_lastSheetPinTextSize = sheetPin->GetSize();
sheetPin->SetPosition( GetCrossHairPosition() );
sheetPin->Draw( m_canvas, aDC, wxPoint( 0, 0 ), g_XorMode );
MoveItem( (SCH_ITEM*) sheetPin, aDC );
OnModify();
return sheetPin;
}
void PCB_BASE_FRAME::DeletePad( D_PAD* aPad, bool aQuery )
{
if( aPad == NULL )
return;
MODULE* module = (MODULE*) aPad->GetParent();
module->SetLastEditTime();
// aQuery = true to prompt for confirmation, false to delete silently
if( aQuery )
{
wxString msg;
msg.Printf( _( "Delete Pad (footprint %s %s) ?" ),
GetChars( module->GetReference() ),
GetChars( module->GetValue() ) );
if( !IsOK( this, msg ) )
return;
}
m_Pcb->m_Status_Pcb = 0;
aPad->DeleteStructure();
// Refresh the modified screen area, using the initial bounding box
// which is perhaps larger than the new bounding box
m_canvas->RefreshDrawingRect( module->GetBoundingBox() );
// Update the bounding box
module->CalculateBoundingBox();
OnModify();
}
void PCB_BASE_FRAME::DeletePad( D_PAD* aPad, bool aQuery )
{
if( aPad == NULL )
return;
MODULE* module = aPad->GetParent();
module->SetLastEditTime();
// aQuery = true to prompt for confirmation, false to delete silently
if( aQuery )
{
wxString msg = wxString::Format( _( "Delete pad (footprint %s %s)?" ),
module->GetReference(),
module->GetValue() );
if( !IsOK( this, msg ) )
return;
}
// Stores the initial bounding box to refresh the old area
EDA_RECT bbox = module->GetBoundingBox();
m_Pcb->m_Status_Pcb = 0;
GetBoard()->PadDelete( aPad );
// Update the bounding box
module->CalculateBoundingBox();
// Refresh the modified screen area, using the initial bounding box
// which is perhaps larger than the new bounding box
m_canvas->RefreshDrawingRect( bbox );
OnModify();
}
void PCB_EDIT_FRAME::End_Move_Zone_Corner_Or_Outlines( wxDC* DC, ZONE_CONTAINER* aZone )
{
aZone->ClearFlags();
m_canvas->SetMouseCapture( NULL, NULL );
if( DC )
aZone->Draw( m_canvas, DC, GR_OR );
OnModify();
s_AddCutoutToCurrentZone = false;
s_CurrentZone = NULL;
SetCurItem( NULL ); // This outline can be deleted when merging outlines
// Combine zones if possible
GetBoard()->OnAreaPolygonModified( &s_AuxiliaryList, aZone );
m_canvas->Refresh();
int ii = GetBoard()->GetAreaIndex( aZone ); // test if aZone exists
if( ii < 0 )
aZone = NULL; // was removed by combining zones
UpdateCopyOfZonesList( s_PickedList, s_AuxiliaryList, GetBoard() );
SaveCopyInUndoList(s_PickedList, UR_UNSPECIFIED);
s_PickedList.ClearItemsList(); // s_ItemsListPicker is no more owner of picked items
int error_count = GetBoard()->Test_Drc_Areas_Outlines_To_Areas_Outlines( aZone, true );
if( error_count )
{
DisplayError( this, _( "Area: DRC outline error" ) );
}
}
void PCB_EDIT_FRAME::Delete_Zone_Contour( wxDC* DC, ZONE_CONTAINER* aZone )
{
int ncont = aZone->m_Poly->GetContour( aZone->m_CornerSelection );
EDA_RECT dirty = aZone->GetBoundingBox();
// For compatibility with old boards: remove old SEGZONE fill segments
Delete_OldZone_Fill( NULL, aZone->GetTimeStamp() );
// Remove current filling:
aZone->UnFill();
if( ncont == 0 ) // This is the main outline: remove all
{
SaveCopyInUndoList( aZone, UR_DELETED );
GetBoard()->Remove( aZone );
}
else
{
SaveCopyInUndoList( aZone, UR_CHANGED );
aZone->m_Poly->RemoveContour( ncont );
}
m_canvas->RefreshDrawingRect( dirty );
OnModify();
}
void PCB_BASE_FRAME::RotateTextModule( TEXTE_MODULE* Text, wxDC* DC )
{
if( Text == NULL )
return;
MODULE* module = (MODULE*) Text->GetParent();
if( module && module->GetFlags() == 0 && Text->GetFlags() == 0 ) // prepare undo command
{
if( IsType( FRAME_PCB ) )
SaveCopyInUndoList( module, UR_CHANGED );
}
// we expect MoveVector to be (0,0) if there is no move in progress
Text->Draw( m_canvas, DC, GR_XOR, MoveVector );
Text->SetTextAngle( Text->GetTextAngle() + 900 );
Text->Draw( m_canvas, DC, GR_XOR, MoveVector );
SetMsgPanel( Text );
if( module )
module->SetLastEditTime();
OnModify();
}
void PCB_EDIT_FRAME::Delete_Segment_Edge( DRAWSEGMENT* Segment, wxDC* DC )
{
EDA_ITEM* PtStruct;
int track_fill_copy = DisplayOpt.DisplayDrawItems;
if( Segment == NULL )
return;
if( Segment->IsNew() ) // Trace in progress.
{
// Delete current segment.
DisplayOpt.DisplayDrawItems = SKETCH;
Segment->Draw( m_canvas, DC, GR_XOR );
PtStruct = Segment->Back();
Segment ->DeleteStructure();
if( PtStruct && (PtStruct->Type() == PCB_LINE_T ) )
Segment = (DRAWSEGMENT*) PtStruct;
DisplayOpt.DisplayDrawItems = track_fill_copy;
SetCurItem( NULL );
}
else if( Segment->GetFlags() == 0 )
{
Segment->Draw( m_canvas, DC, GR_XOR );
Segment->ClearFlags();
SaveCopyInUndoList(Segment, UR_DELETED);
Segment->UnLink();
SetCurItem( NULL );
OnModify();
}
}
void SCH_EDIT_FRAME::OrientComponent( COMPONENT_ORIENTATION_T aOrientation )
{
SCH_SCREEN* screen = GetScreen();
SCH_ITEM* item = screen->GetCurItem();
wxCHECK_RET( item != NULL && item->Type() == SCH_COMPONENT_T,
wxT( "Cannot change orientation of invalid schematic item." ) );
SCH_COMPONENT* component = (SCH_COMPONENT*) item;
m_canvas->MoveCursorToCrossHair();
if( item->GetFlags() == 0 )
SetUndoItem( item );
INSTALL_UNBUFFERED_DC( dc, m_canvas );
component->SetOrientation( aOrientation );
m_canvas->CrossHairOn( &dc );
if( item->GetFlags() == 0 )
{
addCurrentItemToList();
SchematicCleanUp( true );
}
if( GetScreen()->TestDanglingEnds() )
m_canvas->Refresh();
OnModify();
}
void SCH_EDIT_FRAME::MoveItem( SCH_ITEM* aItem, wxDC* aDC )
{
wxCHECK_RET( aItem != NULL, wxT( "Cannot move invalid schematic item" ) );
SetRepeatItem( NULL );
if( !aItem->IsNew() )
{
if( (aItem->Type() == SCH_SHEET_PIN_T) || (aItem->Type() == SCH_FIELD_T) )
SetUndoItem( (SCH_ITEM*) aItem->GetParent() );
else
SetUndoItem( aItem );
}
aItem->SetFlags( IS_MOVED );
#ifdef USE_WX_OVERLAY
this->Refresh();
this->Update();
#endif
m_canvas->CrossHairOff( aDC );
if( aItem->Type() != SCH_SHEET_PIN_T )
SetCrossHairPosition( aItem->GetPosition() );
m_canvas->MoveCursorToCrossHair();
OnModify();
m_canvas->SetMouseCapture( moveItem, abortMoveItem );
GetScreen()->SetCurItem( aItem );
moveItem( m_canvas, aDC, wxDefaultPosition, true );
m_canvas->CrossHairOn( aDC );
}
void SCH_EDIT_FRAME::RotateHierarchicalSheet( SCH_SHEET* aSheet, bool aRotCCW )
{
if( aSheet == NULL )
return;
// Save old sheet in undo list if not already in edit, or moving.
if( aSheet->GetFlags() == 0 )
SaveCopyInUndoList( aSheet, UR_CHANGED );
// Rotate the sheet on itself. Sheets do not have a anchor point.
// Rotation is made around it center
wxPoint rotPoint = aSheet->GetBoundingBox().Centre();
// rotate CCW, or CW. to rotate CW, rotate 3 times
aSheet->Rotate( rotPoint );
if( !aRotCCW )
{
aSheet->Rotate( rotPoint );
aSheet->Rotate( rotPoint );
}
GetCanvas()->Refresh();
OnModify();
}
void PCB_EDIT_FRAME::Rotate_Texte_Pcb( TEXTE_PCB* TextePcb, wxDC* DC )
{
int angle = 900;
if( TextePcb == NULL )
return;
// Erase previous text:
TextePcb->Draw( m_canvas, DC, GR_XOR );
TextePcb->SetOrientation( TextePcb->GetOrientation() + angle );
// Redraw text in new position:
TextePcb->Draw( m_canvas, DC, GR_XOR );
SetMsgPanel( TextePcb );
if( TextePcb->GetFlags() == 0 ) // i.e. not edited, or moved
SaveCopyInUndoList( TextePcb, UR_ROTATED, TextePcb->GetTextPosition() );
else // set flag edit, to show it was a complex command
TextePcb->SetFlags( IN_EDIT );
OnModify();
#ifdef USE_WX_OVERLAY
m_canvas->Refresh();
#endif
}
/**
* Function Delete_OldZone_Fill (obsolete)
* Used for compatibility with old boards
* Remove the zone filling which include the segment aZone, or the zone which have the
* given time stamp.
* A zone is a group of segments which have the same TimeStamp
* @param aZone = zone segment within the zone to delete. Can be NULL
* @param aTimestamp = Timestamp for the zone to delete, used if aZone == NULL
*/
void PCB_EDIT_FRAME::Delete_OldZone_Fill( SEGZONE* aZone, time_t aTimestamp )
{
bool modify = false;
time_t TimeStamp;
if( aZone == NULL )
TimeStamp = aTimestamp;
else
TimeStamp = aZone->GetTimeStamp(); // Save reference time stamp (aZone will be deleted)
SEGZONE* next;
for( SEGZONE* zone = GetBoard()->m_Zone; zone != NULL; zone = next )
{
next = zone->Next();
if( zone->GetTimeStamp() == TimeStamp )
{
modify = true;
// remove item from linked list and free memory
zone->DeleteStructure();
}
}
if( modify )
{
OnModify();
m_canvas->Refresh();
}
}
void PCB_EDIT_FRAME::PlaceTarget( PCB_TARGET* aTarget, wxDC* DC )
{
if( aTarget == NULL )
return;
aTarget->Draw( m_canvas, DC, GR_OR );
m_canvas->SetMouseCapture( NULL, NULL );
SetCurItem( NULL );
OnModify();
if( aTarget->IsNew() )
{
SaveCopyInUndoList( aTarget, UR_NEW );
aTarget->ClearFlags();
return;
}
if( aTarget->GetFlags() == IS_MOVED )
{
SaveCopyInUndoList( aTarget, UR_MOVED,
aTarget->GetPosition() - s_TargetCopy.GetPosition() );
aTarget->ClearFlags();
return;
}
if( (aTarget->GetFlags() & IN_EDIT) )
{
aTarget->SwapData( &s_TargetCopy );
SaveCopyInUndoList( aTarget, UR_CHANGED );
aTarget->SwapData( &s_TargetCopy );
}
aTarget->ClearFlags();
}
void PCB_EDIT_FRAME::Delete_Segment_Edge( DRAWSEGMENT* Segment, wxDC* DC )
{
auto displ_opts = (PCB_DISPLAY_OPTIONS*)GetDisplayOptions();
bool tmp = displ_opts->m_DisplayDrawItemsFill;
if( Segment == NULL )
return;
int mask = EDA_ITEM_ALL_FLAGS - ( SELECTED | HIGHLIGHTED | BRIGHTENED );
if( Segment->IsNew() ) // Trace in progress.
{
// Delete current segment.
displ_opts->m_DisplayDrawItemsFill = SKETCH;
Segment->Draw( m_canvas, DC, GR_XOR );
Segment->DeleteStructure();
displ_opts->m_DisplayDrawItemsFill = tmp;
SetCurItem( NULL );
}
else if( ( Segment->GetFlags() & mask ) == 0 ) // i.e. not edited, or moved
{
Segment->Draw( m_canvas, DC, GR_XOR );
Segment->ClearFlags();
SaveCopyInUndoList(Segment, UR_DELETED);
Segment->UnLink();
SetCurItem( NULL );
OnModify();
}
}
void FOOTPRINT_EDIT_FRAME::Edit_Edge_Width( EDGE_MODULE* aEdge )
{
MODULE* module = GetBoard()->m_Modules;
SaveCopyInUndoList( module, UR_CHANGED );
if( aEdge == NULL )
{
for( BOARD_ITEM *item = module->GraphicalItemsList(); item; item = item->Next() )
{
aEdge = dyn_cast<EDGE_MODULE*>( item );
if( aEdge )
aEdge->SetWidth( GetDesignSettings().GetLineThickness( aEdge->GetLayer() ) );
}
}
else
{
aEdge->SetWidth( GetDesignSettings().GetLineThickness( aEdge->GetLayer() ) );
}
OnModify();
module->CalculateBoundingBox();
module->SetLastEditTime();
}
void FOOTPRINT_EDIT_FRAME::Edit_Edge_Width( EDGE_MODULE* aEdge )
{
MODULE* module = GetBoard()->m_Modules;
SaveCopyInUndoList( module, UR_MODEDIT );
if( aEdge == NULL )
{
aEdge = (EDGE_MODULE*) (BOARD_ITEM*) module->m_Drawings;
for( ; aEdge != NULL; aEdge = aEdge->Next() )
{
if( aEdge->Type() != PCB_MODULE_EDGE_T )
continue;
aEdge->SetWidth( GetDesignSettings().m_ModuleSegmentWidth );
}
}
else
{
aEdge->SetWidth( GetDesignSettings().m_ModuleSegmentWidth );
}
OnModify();
module->CalculateBoundingBox();
module->m_LastEdit_Time = time( NULL );
}
void PCB_EDIT_FRAME::RestoreCopyFromRedoList( wxCommandEvent& aEvent )
{
if( UndoRedoBlocked() )
return;
if( GetScreen()->GetRedoCommandCount() == 0 )
return;
// Inform tools that redo command was issued
TOOL_EVENT event( TC_MESSAGE, TA_UNDO_REDO, AS_GLOBAL );
m_toolManager->ProcessEvent( event );
/* Get the old list */
PICKED_ITEMS_LIST* List = GetScreen()->PopCommandFromRedoList();
/* Redo the command: */
PutDataInPreviousState( List, true );
/* Put the old list in UndoList */
List->ReversePickersListOrder();
GetScreen()->PushCommandToUndoList( List );
OnModify();
m_canvas->Refresh();
}
bool PCB_BASE_FRAME::InvokeDialogGrid()
{
wxPoint grid_origin = GetGridOrigin();
DIALOG_SET_GRID dlg( this, &m_UserGridUnit, g_UserUnit, &m_UserGridSize,
&grid_origin, &m_FastGrid1, &m_FastGrid2,
m_gridSelectBox->GetStrings() );
int ret = dlg.ShowModal();
if( ret == wxID_OK )
{
if( GetGridOrigin() != grid_origin && IsType( FRAME_PCB ) )
OnModify(); // because grid origin is saved in board, show as modified
SetGridOrigin( grid_origin );
GetScreen()->AddGrid( m_UserGridSize, m_UserGridUnit, ID_POPUP_GRID_USER );
// If the user grid is the current option, recall SetGrid()
// to force new values put in list as current grid value
if( GetScreen()->GetGridId() == ID_POPUP_GRID_USER )
GetScreen()->SetGrid( ID_POPUP_GRID_USER );
m_canvas->Refresh();
return true;
}
return false;
}
int PCB_EDIT_FRAME::Fill_Zone( ZONE_CONTAINER* aZone )
{
aZone->ClearFilledPolysList();
aZone->UnFill();
// Cannot fill keepout zones:
if( aZone->GetIsKeepout() )
return 1;
wxString msg;
ClearMsgPanel();
// Shows the net
ZONE_SETTINGS zoneInfo = GetZoneSettings();
zoneInfo.m_NetcodeSelection = aZone->GetNetCode();
SetZoneSettings( zoneInfo );
msg = aZone->GetNetname();
if( msg.IsEmpty() )
msg = wxT( "No net" );
AppendMsgPanel( _( "NetName" ), msg, RED );
wxBusyCursor dummy; // Shows an hourglass cursor (removed by its destructor)
aZone->BuildFilledSolidAreasPolygons( GetBoard() );
GetGalCanvas()->GetView()->Update( aZone, KIGFX::ALL );
GetBoard()->GetRatsnest()->Update( aZone );
OnModify();
return 0;
}
void SCH_EDIT_FRAME::OrientComponent( COMPONENT_ORIENTATION_T aOrientation )
{
SCH_SCREEN* screen = GetScreen();
SCH_ITEM* item = screen->GetCurItem();
SCH_COMPONENT* component = (SCH_COMPONENT*) item;
GetCanvas()->MoveCursorToCrossHair();
if( item->GetFlags() == 0 )
SetUndoItem( item );
component->SetOrientation( aOrientation );
m_canvas->CrossHairOn( );
if( item->GetFlags() == 0 )
{
addCurrentItemToScreen();
SchematicCleanUp();
}
TestDanglingEnds();
RefreshItem( item );
if( item->GetFlags() == 0 )
OnModify();
}
/* Initialize the drawing of a segment of type other than trace.
*/
DRAWSEGMENT* PCB_EDIT_FRAME::Begin_DrawSegment( DRAWSEGMENT* Segment, STROKE_T shape, wxDC* DC )
{
int lineWidth;
DRAWSEGMENT* DrawItem;
lineWidth = GetDesignSettings().GetLineThickness( GetActiveLayer() );
if( Segment == NULL ) // Create new segment.
{
SetCurItem( Segment = new DRAWSEGMENT( GetBoard() ) );
Segment->SetFlags( IS_NEW );
Segment->SetLayer( GetActiveLayer() );
Segment->SetWidth( lineWidth );
Segment->SetShape( shape );
Segment->SetAngle( 900 );
Segment->SetStart( GetCrossHairPosition() );
Segment->SetEnd( GetCrossHairPosition() );
m_canvas->SetMouseCapture( DrawSegment, Abort_EditEdge );
}
else
{
// The ending point coordinate Segment->m_End was updated by the function
// DrawSegment() called on a move mouse event during the segment creation
if( Segment->GetStart() != Segment->GetEnd() )
{
if( Segment->GetShape() == S_SEGMENT )
{
SaveCopyInUndoList( Segment, UR_NEW );
GetBoard()->Add( Segment );
OnModify();
Segment->ClearFlags();
Segment->Draw( m_canvas, DC, GR_OR );
DrawItem = Segment;
SetCurItem( Segment = new DRAWSEGMENT( GetBoard() ) );
Segment->SetFlags( IS_NEW );
Segment->SetLayer( DrawItem->GetLayer() );
Segment->SetWidth( lineWidth );
Segment->SetShape( DrawItem->GetShape() );
Segment->SetType( DrawItem->GetType() );
Segment->SetAngle( DrawItem->GetAngle() );
Segment->SetStart( DrawItem->GetEnd() );
Segment->SetEnd( DrawItem->GetEnd() );
DrawSegment( m_canvas, DC, wxDefaultPosition, false );
}
else
{
End_Edge( Segment, DC );
Segment = NULL;
}
}
}
return Segment;
}
void PCB_EDIT_FRAME::Block_Delete()
{
OnModify();
SetCurItem( NULL );
PICKED_ITEMS_LIST* itemsList = &GetScreen()->m_BlockLocate.GetItems();
itemsList->m_Status = UR_DELETED;
// unlink items and clear flags
for( unsigned ii = 0; ii < itemsList->GetCount(); ii++ )
{
BOARD_ITEM* item = (BOARD_ITEM*) itemsList->GetPickedItem( ii );
itemsList->SetPickedItemStatus( UR_DELETED, ii );
GetBoard()->GetConnectivity()->Remove( item );
switch( item->Type() )
{
case PCB_MODULE_T:
{
MODULE* module = (MODULE*) item;
module->ClearFlags();
module->UnLink();
m_Pcb->m_Status_Pcb = 0;
}
break;
case PCB_ZONE_AREA_T: // a zone area
m_Pcb->Remove( item );
break;
case PCB_LINE_T: // a segment not on copper layers
case PCB_TEXT_T: // a text on a layer
case PCB_TRACE_T: // a track segment (segment on a copper layer)
case PCB_VIA_T: // a via (like track segment on a copper layer)
case PCB_DIMENSION_T: // a dimension (graphic item)
case PCB_TARGET_T: // a target (graphic item)
item->UnLink();
break;
// These items are deleted, but not put in undo list
case PCB_MARKER_T: // a marker used to show something
case PCB_ZONE_T: // SEG_ZONE items are now deprecated
item->UnLink();
itemsList->RemovePicker( ii );
ii--;
item->DeleteStructure();
break;
default:
wxMessageBox( wxT( "PCB_EDIT_FRAME::Block_Delete( ) error: unexpected type" ) );
break;
}
}
SaveCopyInUndoList( *itemsList, UR_DELETED );
Compile_Ratsnest( NULL, true );
m_canvas->Refresh( true );
}
void PCB_EDIT_FRAME::Block_Flip()
{
#define INVERT( pos ) (pos) = center.y - ( (pos) - center.y )
wxPoint memo;
wxPoint center; // Position of the axis for inversion of all elements
OnModify();
PICKED_ITEMS_LIST* itemsList = &GetScreen()->m_BlockLocate.GetItems();
itemsList->m_Status = UR_FLIPPED;
memo = GetCrossHairPosition();
center = GetScreen()->m_BlockLocate.Centre();
for( unsigned ii = 0; ii < itemsList->GetCount(); ii++ )
{
BOARD_ITEM* item = (BOARD_ITEM*) itemsList->GetPickedItem( ii );
wxASSERT( item );
itemsList->SetPickedItemStatus( UR_FLIPPED, ii );
item->Flip( center );
switch( item->Type() )
{
case PCB_MODULE_T:
item->ClearFlags();
m_Pcb->m_Status_Pcb = 0;
break;
// Move and rotate the track segments
case PCB_TRACE_T: // a track segment (segment on a copper layer)
case PCB_VIA_T: // a via (like track segment on a copper layer)
m_Pcb->m_Status_Pcb = 0;
break;
case PCB_ZONE_AREA_T:
case PCB_LINE_T:
case PCB_TEXT_T:
case PCB_TARGET_T:
case PCB_DIMENSION_T:
break;
// This item is not put in undo list
case PCB_ZONE_T: // SEG_ZONE items are now deprecated
itemsList->RemovePicker( ii );
ii--;
break;
default:
wxMessageBox( wxT( "PCB_EDIT_FRAME::Block_Flip( ) error: unexpected type" ) );
break;
}
}
SaveCopyInUndoList( *itemsList, UR_FLIPPED, center );
Compile_Ratsnest( NULL, true );
m_canvas->Refresh( true );
}
void PCB_EDIT_FRAME::Delete_Drawings_All_Layer( PCB_LAYER_ID aLayer )
{
if( IsCopperLayer( aLayer ) )
{
DisplayError( this, _( "Copper layer global delete not allowed!" ) );
return;
}
wxString msg;
msg.Printf( _( "Delete everything on layer %s?" ),
GetChars( GetBoard()->GetLayerName( aLayer ) ) );
if( !IsOK( this, msg ) )
return;
// Step 1: build the list of items to remove.
// because we are using iterators, we cannot modify the drawing list during iterate
// so we are using a 2 steps calculation:
// First, collect items.
// Second, remove items.
std::vector<BOARD_ITEM*> list;
for( auto item : GetBoard()->Drawings() )
{
switch( item->Type() )
{
case PCB_LINE_T:
case PCB_TEXT_T:
case PCB_DIMENSION_T:
case PCB_TARGET_T:
if( item->GetLayer() == aLayer )
list.push_back( item );
break;
default:
wxLogDebug( wxT( "Delete_Drawings_All_Layer() error: unknown type %d" ), item->Type() );
}
}
if( list.size() == 0 ) // No item found
return;
// Step 2: remove items from main list, and move them to the undo list
PICKED_ITEMS_LIST pickList;
ITEM_PICKER picker( NULL, UR_DELETED );
for( auto item : list )
{
item->UnLink();
picker.SetItem( item );
pickList.PushItem( picker );
}
OnModify();
SaveCopyInUndoList(pickList, UR_DELETED);
}
void PCB_EDIT_FRAME::Block_Rotate()
{
wxPoint oldpos;
wxPoint centre; // rotation cent-re for the rotation transform
int rotAngle = 900; // rotation angle in 0.1 deg.
oldpos = GetScreen()->GetCrossHairPosition();
centre = GetScreen()->m_BlockLocate.Centre();
OnModify();
PICKED_ITEMS_LIST* itemsList = &GetScreen()->m_BlockLocate.m_ItemsSelection;
itemsList->m_Status = UR_ROTATED;
for( unsigned ii = 0; ii < itemsList->GetCount(); ii++ )
{
BOARD_ITEM* item = (BOARD_ITEM*) itemsList->GetPickedItem( ii );
wxASSERT( item );
itemsList->SetPickedItemStatus( UR_ROTATED, ii );
item->Rotate( centre, rotAngle );
switch( item->Type() )
{
case PCB_MODULE_T:
( (MODULE*) item )->ClearFlags();
m_Pcb->m_Status_Pcb = 0;
break;
/* Move and rotate the track segments */
case PCB_TRACE_T: // a track segment (segment on a copper layer)
case PCB_VIA_T: // a via (like track segment on a copper layer)
m_Pcb->m_Status_Pcb = 0;
break;
case PCB_ZONE_AREA_T:
case PCB_LINE_T:
case PCB_TEXT_T:
case PCB_TARGET_T:
case PCB_DIMENSION_T:
break;
// This item is not put in undo list
case PCB_ZONE_T: // SEG_ZONE items are now deprecated
itemsList->RemovePicker( ii );
ii--;
break;
default:
wxMessageBox( wxT( "PCB_EDIT_FRAME::Block_Rotate( ) error: unexpected type" ) );
break;
}
}
SaveCopyInUndoList( *itemsList, UR_ROTATED, centre );
Compile_Ratsnest( NULL, true );
m_canvas->Refresh( true );
}
void PCB_EDIT_FRAME::Remove_Zone_Corner( wxDC* DC, ZONE_CONTAINER* aZone )
{
OnModify();
if( aZone->m_Poly->GetNumCorners() <= 3 )
{
m_canvas->RefreshDrawingRect( aZone->GetBoundingBox() );
if( DC )
{ // Remove the full zone because this is no more an area
aZone->UnFill();
aZone->DrawFilledArea( m_canvas, DC, GR_XOR );
}
GetBoard()->Delete( aZone );
return;
}
int layer = aZone->GetLayer();
if( DC )
{
GetBoard()->RedrawAreasOutlines( m_canvas, DC, GR_XOR, layer );
GetBoard()->RedrawFilledAreas( m_canvas, DC, GR_XOR, layer );
}
s_AuxiliaryList.ClearListAndDeleteItems();
s_PickedList. ClearListAndDeleteItems();
SaveCopyOfZones( s_PickedList, GetBoard(), aZone->GetNet(),
aZone->GetLayer() );
aZone->m_Poly->DeleteCorner( aZone->m_CornerSelection );
// modify zones outlines according to the new aZone shape
GetBoard()->OnAreaPolygonModified( &s_AuxiliaryList, aZone );
if( DC )
{
GetBoard()->RedrawAreasOutlines( m_canvas, DC, GR_OR, layer );
GetBoard()->RedrawFilledAreas( m_canvas, DC, GR_OR, layer );
}
UpdateCopyOfZonesList( s_PickedList, s_AuxiliaryList, GetBoard() );
SaveCopyInUndoList(s_PickedList, UR_UNSPECIFIED);
s_PickedList.ClearItemsList(); // s_ItemsListPicker is no more owner of picked items
int ii = GetBoard()->GetAreaIndex( aZone ); // test if aZone exists
if( ii < 0 )
aZone = NULL; // aZone does not exist anymore, after combining zones
int error_count = GetBoard()->Test_Drc_Areas_Outlines_To_Areas_Outlines( aZone, true );
if( error_count )
{
DisplayError( this, _( "Area: DRC outline error" ) );
}
}
void SCH_EDIT_FRAME::OnSelectUnit( wxCommandEvent& aEvent )
{
SCH_SCREEN* screen = GetScreen();
SCH_ITEM* item = screen->GetCurItem();
wxCHECK_RET( item != NULL && item->Type() == SCH_COMPONENT_T,
wxT( "Cannot select unit of invalid schematic item." ) );
INSTALL_UNBUFFERED_DC( dc, m_canvas );
m_canvas->MoveCursorToCrossHair();
SCH_COMPONENT* component = (SCH_COMPONENT*) item;
int unit = aEvent.GetId() + 1 - ID_POPUP_SCH_SELECT_UNIT1;
LIB_PART* part = GetLibPart( component->GetLibId() );
if( !part )
return;
int unitCount = part->GetUnitCount();
wxCHECK_RET( (unit >= 1) && (unit <= unitCount),
wxString::Format( wxT( "Cannot select unit %d from component " ), unit ) +
part->GetName() );
if( unitCount <= 1 || component->GetUnit() == unit )
return;
if( unit > unitCount )
unit = unitCount;
STATUS_FLAGS flags = component->GetFlags();
if( !flags ) // No command in progress: save in undo list
SaveCopyInUndoList( component, UR_CHANGED );
if( flags )
component->Draw( m_canvas, &dc, wxPoint( 0, 0 ), g_XorMode, g_GhostColor );
else
component->Draw( m_canvas, &dc, wxPoint( 0, 0 ), g_XorMode );
/* Update the unit number. */
component->SetUnitSelection( m_CurrentSheet, unit );
component->SetUnit( unit );
component->ClearFlags();
component->SetFlags( flags ); // Restore m_Flag modified by SetUnit()
if( m_autoplaceFields )
component->AutoAutoplaceFields( GetScreen() );
if( screen->TestDanglingEnds() )
m_canvas->Refresh();
OnModify();
}
