Esempi in C++ (Cpp) per PARAM_TIM_INT_TYPE

Esempio n. 1

File: lpc11xx_tmr.c Progetto: inf3ct3d/fmtr

/*********************************************************************//**
 * @brief 		Clear Interrupt pending
 * @param[in]	TIMx Timer selection, should be LPC_TMR16B0, 
 *                   LPC_TMR16B1, LPC_TMR32B0, LPC_TMR32B1
 * @param[in]	IntFlag should be in TIM_INT_TYPE enum
 * @return 		None
 **********************************************************************/
void TIM_ClearIntPending(TMR_TypeDef *TIMx, uint8_t IntFlag)
{
	CHECK_PARAM(PARAM_TIMx(TIMx));
	CHECK_PARAM(PARAM_TIM_INT_TYPE(IntFlag));

	TIMx->IR = TIM_IR_CLR(IntFlag) 	;
}

Esempio n. 2

File: lpc17xx_timer.c Progetto: ashrayjain/ee2024-assignment2

/*********************************************************************//**
 * @brief 		Get Capture Interrupt Status
 * @param[in]	TIMx Timer selection, should be TIM0, TIM1, TIM2, TIM3
 * @param[in]	IntFlag
 * @return 		FlagStatus
 * 				- SET : interrupt
 * 				- RESET : no interrupt
 **********************************************************************/
FlagStatus TIM_GetIntCaptureStatus(LPC_TIM_TypeDef *TIMx, uint8_t IntFlag)
{
	CHECK_PARAM(PARAM_TIMx(TIMx));
	CHECK_PARAM(PARAM_TIM_INT_TYPE(IntFlag));
	uint8_t temp = (TIMx->IR) & (1<<(4+IntFlag));
	if(temp)
		return SET;
	return RESET;
}

Esempio n. 3

File: lpc17xx_timer.c Progetto: lnls-dig/bpm-ipmi

/*********************************************************************//**
 * @brief 		Get Capture Interrupt Status
 * @param[in]	TIMx Timer selection, should be:
 *  	   		- LPC_TIM0: TIMER0 peripheral
 * 				- LPC_TIM1: TIMER1 peripheral
 * 				- LPC_TIM2: TIMER2 peripheral
 * 				- LPC_TIM3: TIMER3 peripheral
 * @param[in]	IntFlag: interrupt type, should be:
 * 				- TIM_MR0_INT: Interrupt for Match channel 0
 * 				- TIM_MR1_INT: Interrupt for Match channel 1
 * 				- TIM_MR2_INT: Interrupt for Match channel 2
 * 				- TIM_MR3_INT: Interrupt for Match channel 3
 * 				- TIM_CR0_INT: Interrupt for Capture channel 0
 * 				- TIM_CR1_INT: Interrupt for Capture channel 1
 * @return 		FlagStatus
 * 				- SET : interrupt
 * 				- RESET : no interrupt
 **********************************************************************/
FlagStatus TIM_GetIntCaptureStatus(LPC_TIM_TypeDef *TIMx, TIM_INT_TYPE IntFlag)
{
	uint8_t temp;
	CHECK_PARAM(PARAM_TIMx(TIMx));
	CHECK_PARAM(PARAM_TIM_INT_TYPE(IntFlag));
	temp = (TIMx->IR) & (1<<(4+IntFlag));
	if(temp)
		return (SET);
	return (RESET);
}

Esempio n. 4

File: lpc17xx_timer.c Progetto: devemouse/glcd

/*********************************************************************//**
 * @brief 		Get Interrupt Status
 * @param[in]	TIMx Timer selection, should be TIM0, TIM1, TIM2, TIM3
 * @param[in]	IntFlag
 * @return 		FlagStatus
 * 				- SET : interrupt
 * 				- RESET : no interrupt
 **********************************************************************/
FlagStatus TIM_GetIntStatus(TIM_TypeDef *TIMx, uint8_t IntFlag)
{
	CHECK_PARAM(PARAM_TIMx(TIMx));
	CHECK_PARAM(PARAM_TIM_INT_TYPE(IntFlag));
	uint8_t temp = (TIMx->IR)& TIM_IR_CLR(IntFlag);
	if (temp)
		return SET;

	return RESET;

}

Esempio n. 5

File: lpc43xx_timer.c Progetto: NeuronRobotics/microcontroller-sample

/*********************************************************************//**
 * @brief 		Get Interrupt Status
 * @param[in]	TIMx Timer selection, should be:
 * 					- LPC_TIM0	:TIMER0 peripheral
 * 					- LPC_TIM1	:TIMER1 peripheral
 * 					- LPC_TIM2	:TIMER2 peripheral
 * 					- LPC_TIM3	:TIMER3 peripheral
 * @param[in]	IntFlag: interrupt type, should be:
 * 					- TIM_MR0_INT	:Interrupt for Match channel 0
 * 					- TIM_MR1_INT	:Interrupt for Match channel 1
 * 					- TIM_MR2_INT	:Interrupt for Match channel 2
 * 					- TIM_MR3_INT	:Interrupt for Match channel 3
 * 					- TIM_CR0_INT	:Interrupt for Capture channel 0
 * 					- TIM_CR1_INT	:Interrupt for Capture channel 1
 * @return 		FlagStatus
 * 					- SET 	:interrupt
 * 					- RESET :no interrupt
 **********************************************************************/
FlagStatus TIM_GetIntStatus(LPC_TIMERn_Type *TIMx, TIM_INT_TYPE IntFlag)
{
	uint8_t temp;
	CHECK_PARAM(PARAM_TIMx(TIMx));
	CHECK_PARAM(PARAM_TIM_INT_TYPE(IntFlag));
	temp = (TIMx->IR)& TIM_IR_CLR(IntFlag);
	if (temp)
		return SET;

	return RESET;

}

Esempio n. 6

File: lpc17xx_timer.c Progetto: zhuhuijia0001/eload

/*********************************************************************//**
 * @brief 		Clear Capture Interrupt pending
 * @param[in]	TIMx Timer selection, should be
 *    			- LPC_TIM0: TIMER0 peripheral
 * 				- LPC_TIM1: TIMER1 peripheral
 * 				- LPC_TIM2: TIMER2 peripheral
 * 				- LPC_TIM3: TIMER3 peripheral
 * @param[in]	IntFlag interrupt type, should be:
 *				- TIM_MR0_INT: Interrupt for Match channel 0
 * 				- TIM_MR1_INT: Interrupt for Match channel 1
 * 				- TIM_MR2_INT: Interrupt for Match channel 2
 * 				- TIM_MR3_INT: Interrupt for Match channel 3
 * 				- TIM_CR0_INT: Interrupt for Capture channel 0
 * 				- TIM_CR1_INT: Interrupt for Capture channel 1
 * @return 		None
 **********************************************************************/
void TIM_ClearIntCapturePending(LPC_TIM_TypeDef *TIMx, TIM_INT_TYPE IntFlag)
{
	CHECK_PARAM(PARAM_TIMx(TIMx));
	CHECK_PARAM(PARAM_TIM_INT_TYPE(IntFlag));
	TIMx->IR |= (1<<IntFlag);
}

Esempio n. 7

File: lpc17xx_timer.c Progetto: zhuhuijia0001/eload

/*********************************************************************//**
 * @brief 		Clear Interrupt pending
 * @param[in]	TIMx Timer selection, should be:
 *    			- LPC_TIM0: TIMER0 peripheral
 * 				- LPC_TIM1: TIMER1 peripheral
 * 				- LPC_TIM2: TIMER2 peripheral
 * 				- LPC_TIM3: TIMER3 peripheral
 * @param[in]	IntFlag: interrupt type, should be:
 * 				- TIM_MR0_INT: Interrupt for Match channel 0
 * 				- TIM_MR1_INT: Interrupt for Match channel 1
 * 				- TIM_MR2_INT: Interrupt for Match channel 2
 * 				- TIM_MR3_INT: Interrupt for Match channel 3
 * 				- TIM_CR0_INT: Interrupt for Capture channel 0
 * 				- TIM_CR1_INT: Interrupt for Capture channel 1
 * @return 		None
 **********************************************************************/
void TIM_ClearIntPending(LPC_TIM_TypeDef *TIMx, TIM_INT_TYPE IntFlag)
{
	CHECK_PARAM(PARAM_TIMx(TIMx));
	CHECK_PARAM(PARAM_TIM_INT_TYPE(IntFlag));
	TIMx->IR |= TIM_IR_CLR(IntFlag);
}

Esempio n. 8

File: lpc43xx_timer.c Progetto: NeuronRobotics/microcontroller-sample

/*********************************************************************//**
 * @brief 		Clear Capture Interrupt pending
 * @param[in]	TIMx Timer selection, should be
 * 					- LPC_TIM0	:TIMER0 peripheral
 * 					- LPC_TIM1	:TIMER1 peripheral
 * 					- LPC_TIM2	:TIMER2 peripheral
 * 					- LPC_TIM3	:TIMER3 peripheral
 * @param[in]	IntFlag interrupt type, should be:
 * 					- TIM_MR0_INT	:Interrupt for Match channel 0
 * 					- TIM_MR1_INT	:Interrupt for Match channel 1
 * 					- TIM_MR2_INT	:Interrupt for Match channel 2
 * 					- TIM_MR3_INT	:Interrupt for Match channel 3
 * 					- TIM_CR0_INT	:Interrupt for Capture channel 0
 * 					- TIM_CR1_INT	:Interrupt for Capture channel 1
 * @return 		None
 **********************************************************************/
void TIM_ClearIntCapturePending(LPC_TIMERn_Type *TIMx, TIM_INT_TYPE IntFlag)
{
	CHECK_PARAM(PARAM_TIMx(TIMx));
	CHECK_PARAM(PARAM_TIM_INT_TYPE(IntFlag));
	TIMx->IR = (1<<(4+IntFlag));
}